aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/gpu
AgeCommit message (Collapse)AuthorFilesLines
2020-09-01drm/i915: Don't fully disable HDCP on a port if multiple pipes are using itSean Paul5-0/+45
This patch is required for HDCP over MST. If a port is being used for multiple HDCP streams, we don't want to fully disable HDCP on a port if one of them is disabled. Instead, we just disable the HDCP signalling on that particular pipe and exit early. The last pipe to disable HDCP will also bring down HDCP on the port. In order to achieve this, we need to keep a refcount in intel_digital_port and protect it using a new hdcp_mutex. Cc: Ramalingam C <ramalingam.c@intel.com> Reviewed-by: Ramalingam C <ramalingam.c@intel.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191203173638.94919-8-sean@poorly.run #v1 Link: https://patchwork.freedesktop.org/patch/msgid/20191212190230.188505-9-sean@poorly.run #v2 Link: https://patchwork.freedesktop.org/patch/msgid/20200117193103.156821-9-sean@poorly.run #v3 Link: https://patchwork.freedesktop.org/patch/msgid/20200218220242.107265-9-sean@poorly.run #v4 Link: https://patchwork.freedesktop.org/patch/msgid/20200305201236.152307-9-sean@poorly.run #v5 Link: https://patchwork.freedesktop.org/patch/msgid/20200429195502.39919-9-sean@poorly.run #v6 Link: https://patchwork.freedesktop.org/patch/msgid/20200623155907.22961-10-sean@poorly.run #v7 Changes in v2: -Move the toggle_signalling call into _intel_hdcp_disable so it's called from check_work Changes in v3: -None Changes in v4: -None Changes in v5: -Change WARN_ON to drm_WARN_ON Changes in v6: -None Changes in v7: -Split minor intel_hdcp_disable refactor into separate patch (Ramalingam) Changes in v8: -None Signed-off-by: Ramalingam C <ramalingam.c@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200818153910.27894-10-sean@poorly.run
2020-09-01drm/i915: Clean up intel_hdcp_disableSean Paul1-9/+10
Add an out label and un-indent hdcp disable in preparation for hdcp_mutex. No functional changes Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com> Reviewed-by: Ramalingam C <ramalingam.c@intel.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200429195502.39919-9-sean@poorly.run #v6 Link: https://patchwork.freedesktop.org/patch/msgid/20200623155907.22961-9-sean@poorly.run #v7 Changes in v7: -Split into separate patch (Ramalingam) Changes in v8: -None Signed-off-by: Ramalingam C <ramalingam.c@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200818153910.27894-9-sean@poorly.run
2020-09-01drm/i915: Protect workers against disappearing connectorsSean Paul1-5/+39
This patch adds some protection against connectors being destroyed before the HDCP workers are finished. For check_work, we do a synchronous cancel after the connector is unregistered which will ensure that it is finished before destruction. In the case of prop_work, we can't do a synchronous wait since it needs to take connection_mutex which could cause deadlock. Instead, we'll take a reference on the connector when scheduling prop_work and give it up once we're done. Reviewed-by: Ramalingam C <ramalingam.c@intel.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191212190230.188505-8-sean@poorly.run #v2 Link: https://patchwork.freedesktop.org/patch/msgid/20200117193103.156821-8-sean@poorly.run #v3 Link: https://patchwork.freedesktop.org/patch/msgid/20200218220242.107265-8-sean@poorly.run #v4 Link: https://patchwork.freedesktop.org/patch/msgid/20200305201236.152307-8-sean@poorly.run #v5 Link: https://patchwork.freedesktop.org/patch/msgid/20200429195502.39919-8-sean@poorly.run #v6 Link: https://patchwork.freedesktop.org/patch/msgid/20200623155907.22961-8-sean@poorly.run #v7 Changes in v2: -Added to the set Changes in v3: -Change the WARN_ON condition in intel_hdcp_cleanup to allow for initializing connectors as well Changes in v4: -None Changes in v5: -Change WARN_ON to drm_WARN_ON Changes in v6: -None Changes in v7: -None Changes in v8: -None Signed-off-by: Ramalingam C <ramalingam.c@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200818153910.27894-8-sean@poorly.run
2020-09-01drm/i915: Factor out hdcp->value assignmentsSean Paul1-21/+46
This is a bit of housecleaning for a future patch. Instead of sprinkling hdcp->value assignments and prop_work scheduling everywhere, introduce a function to do it for us. Reviewed-by: Ramalingam C <ramalingam.c@intel.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191203173638.94919-7-sean@poorly.run #v1 Link: https://patchwork.freedesktop.org/patch/msgid/20191212190230.188505-7-sean@poorly.run #v2 Link: https://patchwork.freedesktop.org/patch/msgid/20200117193103.156821-7-sean@poorly.run #v3 Link: https://patchwork.freedesktop.org/patch/msgid/20200218220242.107265-7-sean@poorly.run #v4 Link: https://patchwork.freedesktop.org/patch/msgid/20200305201236.152307-7-sean@poorly.run #v5 Link: https://patchwork.freedesktop.org/patch/msgid/20200429195502.39919-7-sean@poorly.run #v6 Link: https://patchwork.freedesktop.org/patch/msgid/20200623155907.22961-7-sean@poorly.run #v7 Changes in v2: -None Changes in v3: -None Changes in v4: -Rebased on top of drm_* logging changes Changes in v5: -Change WARN_ON to drm_WARN_ON Changes in v6: -None Changes in v7: -None Changes in v8: -None Signed-off-by: Ramalingam C <ramalingam.c@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200818153910.27894-7-sean@poorly.run
2020-09-01drm/i915: Use the cpu_transcoder in intel_hdcp to toggle HDCP signallingSean Paul6-22/+26
Instead of using intel_dig_port's encoder pipe to determine which transcoder to toggle signalling on, use the cpu_transcoder field already stored in intel_hdmi. This is particularly important for MST. Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ramalingam C <ramalingam.c@intel.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191212190230.188505-6-sean@poorly.run #v2 Link: https://patchwork.freedesktop.org/patch/msgid/20200117193103.156821-6-sean@poorly.run #v3 Link: https://patchwork.freedesktop.org/patch/msgid/20200218220242.107265-6-sean@poorly.run #v4 Link: https://patchwork.freedesktop.org/patch/msgid/20200305201236.152307-6-sean@poorly.run #v5 Link: https://patchwork.freedesktop.org/patch/msgid/20200429195502.39919-6-sean@poorly.run #v6 Link: https://patchwork.freedesktop.org/patch/msgid/20200623155907.22961-6-sean@poorly.run #v7 Changes in v2: -Added to the set Changes in v3: -s/hdcp/hdmi/ in commit msg (Ram) Changes in v4: -Rebased on intel_de_(read|write) change Changes in v5: -Update hdcp->cpu_transcoder in intel_hdcp_enable so it works with pipe != 0 Changes in v6: -None Changes in v7: -None Changes in v8: -None Signed-off-by: Ramalingam C <ramalingam.c@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200818153910.27894-6-sean@poorly.run
2020-09-01drm/i915: Intercept Aksv writes in the aux hooksSean Paul1-33/+29
Instead of hand rolling the transfer ourselves in the hdcp hook, inspect aux messages and add the aksv flag in the aux transfer hook. IIRC, this was the original implementation and folks wanted this hack to be isolated to the hdcp code, which makes sense. However in testing an LG monitor on my desk, I noticed it was passing back a DEFER reply. This wasn't handled in our hand-rolled code and HDCP auth was failing as a result. Instead of copy/pasting all of the retry logic and delays from drm dp helpers, let's just use the helpers and hide the aksv select as best as we can. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ramalingam C <ramalingam.c@intel.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191203173638.94919-3-sean@poorly.run #v1 Link: https://patchwork.freedesktop.org/patch/msgid/20191212190230.188505-5-sean@poorly.run #v2 Link: https://patchwork.freedesktop.org/patch/msgid/20200117193103.156821-5-sean@poorly.run #v3 Link: https://patchwork.freedesktop.org/patch/msgid/20200218220242.107265-5-sean@poorly.run #v4 Link: https://patchwork.freedesktop.org/patch/msgid/20200305201236.152307-5-sean@poorly.run #v5 Link: https://patchwork.freedesktop.org/patch/msgid/20200429195502.39919-5-sean@poorly.run #v6 Link: https://patchwork.freedesktop.org/patch/msgid/20200623155907.22961-5-sean@poorly.run #v7 Changes in v2: -Remove 'generate' in intel_dp_aux_generate_xfer_flags, make arg const (Ville) -Bundle Aksv if statement together (Ville) -Rename 'txbuf' to 'aksv' (Ville) Changes in v3: -None Changes in v4: -None Changes in v5: -None Changes in v6: -None Changes in v7: -None Changes in v8: -None Signed-off-by: Ramalingam C <ramalingam.c@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200818153910.27894-5-sean@poorly.run
2020-09-01drm/i915: WARN if HDCP signalling is enabled upon disableSean Paul1-0/+2
HDCP signalling should not be left on, WARN if it is Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Ramalingam C <ramalingam.c@intel.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191212190230.188505-4-sean@poorly.run #v2 Link: https://patchwork.freedesktop.org/patch/msgid/20200117193103.156821-4-sean@poorly.run #v3 Link: https://patchwork.freedesktop.org/patch/msgid/20200218220242.107265-4-sean@poorly.run #v4 Link: https://patchwork.freedesktop.org/patch/msgid/20200305201236.152307-4-sean@poorly.run #v5 Link: https://patchwork.freedesktop.org/patch/msgid/20200429195502.39919-4-sean@poorly.run #v6 Link: https://patchwork.freedesktop.org/patch/msgid/20200623155907.22961-4-sean@poorly.run #v7 Changes in v2: -Added to the set in lieu of just clearing the bit Changes in v3: -None Changes in v4: -None Changes in v5: -Change WARN_ON to drm_WARN_ON Changes in v6: -None Changes in v7: -Rebased, variable name changed from 'ctl' to 'val' Changes in v8: -None Signed-off-by: Ramalingam C <ramalingam.c@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200818153910.27894-4-sean@poorly.run
2020-09-01drm/i915: Clear the repeater bit on HDCP disableSean Paul1-0/+6
On HDCP disable, clear the repeater bit. This ensures if we connect a non-repeater sink after a repeater, the bit is in the state we expect. Fixes: ee5e5e7a5e0f ("drm/i915: Add HDCP framework + base implementation") Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ramalingam C <ramalingam.c@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Sean Paul <seanpaul@chromium.org> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: intel-gfx@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v4.17+ Reviewed-by: Ramalingam C <ramalingam.c@intel.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191212190230.188505-3-sean@poorly.run #v2 Link: https://patchwork.freedesktop.org/patch/msgid/20200117193103.156821-3-sean@poorly.run #v3 Link: https://patchwork.freedesktop.org/patch/msgid/20200218220242.107265-3-sean@poorly.run #v4 Link: https://patchwork.freedesktop.org/patch/msgid/20200305201236.152307-3-sean@poorly.run #v5 Link: https://patchwork.freedesktop.org/patch/msgid/20200429195502.39919-3-sean@poorly.run #v6 Link: https://patchwork.freedesktop.org/patch/msgid/20200623155907.22961-3-sean@poorly.run #v7 Changes in v2: -Added to the set Changes in v3: -None I had previously agreed that clearing the rep_ctl bits on enable would also be a good idea. However when I committed that idea to code, it didn't look right. So let's rely on enables and disables being paired and everything outside of that will be considered a bug Changes in v4: -s/I915_(READ|WRITE)/intel_de_(read|write)/ Changes in v5: -None Changes in v6: -None Changes in v7: -None Changes in v8: -None Signed-off-by: Ramalingam C <ramalingam.c@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200818153910.27894-3-sean@poorly.run
2020-09-01drm/i915: Fix sha_text population codeSean Paul1-6/+20
This patch fixes a few bugs: 1- We weren't taking into account sha_leftovers when adding multiple ksvs to sha_text. As such, we were or'ing the end of ksv[j - 1] with the beginning of ksv[j] 2- In the sha_leftovers == 2 and sha_leftovers == 3 case, bstatus was being placed on the wrong half of sha_text, overlapping the leftover ksv value 3- In the sha_leftovers == 2 case, we need to manually terminate the byte stream with 0x80 since the hardware doesn't have enough room to add it after writing M0 The upside is that all of the HDCP supported HDMI repeaters I could find on Amazon just strip HDCP anyways, so it turns out to be _really_ hard to hit any of these cases without an MST hub, which is not (yet) supported. Oh, and the sha_leftovers == 1 case works perfectly! Fixes: ee5e5e7a5e0f ("drm/i915: Add HDCP framework + base implementation") Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ramalingam C <ramalingam.c@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Sean Paul <seanpaul@chromium.org> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: intel-gfx@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v4.17+ Reviewed-by: Ramalingam C <ramalingam.c@intel.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191203173638.94919-2-sean@poorly.run #v1 Link: https://patchwork.freedesktop.org/patch/msgid/20191212190230.188505-2-sean@poorly.run #v2 Link: https://patchwork.freedesktop.org/patch/msgid/20200117193103.156821-2-sean@poorly.run #v3 Link: https://patchwork.freedesktop.org/patch/msgid/20200218220242.107265-2-sean@poorly.run #v4 Link: https://patchwork.freedesktop.org/patch/msgid/20200305201236.152307-2-sean@poorly.run #v5 Link: https://patchwork.freedesktop.org/patch/msgid/20200429195502.39919-2-sean@poorly.run #v6 Link: https://patchwork.freedesktop.org/patch/msgid/20200623155907.22961-2-sean@poorly.run #v7 Changes in v2: -None Changes in v3: -None Changes in v4: -Rebased on intel_de_write changes Changes in v5: -None Changes in v6: -None Changes in v7: -None Changes in v8: -None Signed-off-by: Ramalingam C <ramalingam.c@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200818153910.27894-2-sean@poorly.run
2020-08-31drm/nouveau/kms: Start using drm_dp_read_dpcd_caps()Lyude Paul1-8/+6
Now that we've extracted i915's code for reading both the normal DPCD caps and extended DPCD caps into a shared helper, let's start using this in nouveau to enable us to start checking extended DPCD caps for free. Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Ben Skeggs <bskeggs@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200826182456.322681-21-lyude@redhat.com
2020-08-31drm/i915/dp: Extract drm_dp_read_dpcd_caps()Lyude Paul4-60/+80
Since DP 1.3, it's been possible for DP receivers to specify an additional set of DPCD capabilities, which can take precedence over the capabilities reported at DP_DPCD_REV. Basically any device supporting DP is going to need to read these in an identical manner, in particular nouveau, so let's go ahead and just move this code out of i915 into a shared DRM DP helper that we can use in other drivers. v2: * Remove redundant dpcd[DP_DPCD_REV] == 0 check * Fix drm_dp_dpcd_read() ret checks Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Sean Paul <sean@poorly.run> Link: https://patchwork.freedesktop.org/patch/msgid/20200826182456.322681-20-lyude@redhat.com
2020-08-31drm/nouveau/kms: Don't change EDID when it hasn't actually changedLyude Paul1-27/+27
Currently in nouveau_connector_ddc_detect() and nouveau_connector_detect_lvds(), we start the connector probing process by releasing the previous EDID and informing DRM of the change. However, since commit 5186421cbfe2 ("drm: Introduce epoch counter to drm_connector") drm_connector_update_edid_property() actually checks whether the new EDID we've specified is different from the previous one, and updates the connector's epoch accordingly if it is. But, because we always set the EDID to NULL first in nouveau_connector_ddc_detect() and nouveau_connector_detect_lvds() we end up making DRM think that the EDID changes every single time we do a connector probe - which isn't needed. So, let's fix this by not clearing the EDID at the start of the connector probing process, and instead simply changing or removing it once near the end of the probing process. This will help prevent us from sending unneeded hotplug events to userspace when nothing has actually changed. Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Ben Skeggs <bskeggs@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200826182456.322681-19-lyude@redhat.com
2020-08-31drm/nouveau/kms/nv50-: Add support for DP_SINK_COUNTLyude Paul2-5/+50
This is another bit that we never implemented for nouveau: dongle detection. When a "dongle", e.g. an active display adaptor, is hooked up to the system and causes an HPD to be fired, we don't actually know whether or not there's anything plugged into the dongle without checking the sink count. As a result, plugging in a dongle without anything plugged into it currently results in a bogus EDID retrieval error in the kernel log. Additionally, most dongles won't send another long HPD signal if the user suddenly plugs something in, they'll only send a short HPD IRQ with the expectation that the source will check the sink count and reprobe the connector if it's changed - something we don't actually do. As a result, nothing will happen if the user plugs the dongle in before plugging something into the dongle. So, let's fix this by checking the sink count in both nouveau_dp_probe_dpcd() and nouveau_dp_irq(), and reprobing the connector if things change. Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Ben Skeggs <bskeggs@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200826182456.322681-18-lyude@redhat.com
2020-08-31drm/i915/dp: Extract drm_dp_read_sink_count()Lyude Paul2-6/+31
And of course, we'll also need to read the sink count from other drivers as well if we're checking whether or not it's supported. So, let's extract the code for this into another helper. v2: * Fix drm_dp_dpcd_readb() ret check * Add back comment and move back sink_count assignment in intel_dp_get_dpcd() v5: * Change name from drm_dp_get_sink_count() to drm_dp_read_sink_count() * Also, add "See also:" section to kdocs Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Sean Paul <sean@poorly.run> Link: https://patchwork.freedesktop.org/patch/msgid/20200826182456.322681-17-lyude@redhat.com
2020-08-31drm/i915/dp: Extract drm_dp_read_sink_count_cap()Lyude Paul2-9/+34
Since other drivers are also going to need to be aware of the sink count in order to do proper dongle detection, we might as well steal i915's DP_SINK_COUNT helpers and move them into DRM helpers so that other dirvers can use them as well. Note that this also starts using intel_dp_has_sink_count() in intel_dp_detect_dpcd(), which is a functional change. v5: * Change name from drm_dp_has_sink_count() to drm_dp_read_sink_count_cap() Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Sean Paul <sean@poorly.run> Link: https://patchwork.freedesktop.org/patch/msgid/20200826182456.322681-16-lyude@redhat.com
2020-08-31drm/nouveau/kms/nv50-: Use downstream DP clock limits for mode validationLyude Paul3-4/+15
This adds support for querying the maximum clock rate of a downstream port on a DisplayPort connection. Generally, downstream ports refer to active dongles which can have their own pixel clock limits. Note as well, we also start marking the connector as disconnected if we can't read the DPCD, since we wouldn't be able to do anything without DPCD access anyway. Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Ben Skeggs <bskeggs@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200826182456.322681-15-lyude@redhat.com
2020-08-31drm/i915/dp: Extract drm_dp_read_downstream_info()Lyude Paul2-14/+62
We're going to be doing the same probing process in nouveau for determining downstream DP port capabilities, so let's deduplicate the work by moving i915's code for handling this into a shared helper: drm_dp_read_downstream_info(). Note that when we do this, we also do make some functional changes while we're at it: * We always clear the downstream port info before trying to read it, just to make things easier for the caller * We skip reading downstream port info if the DPCD indicates that we don't support downstream port info * We only read as many bytes as needed for the reported number of downstream ports, no sense in reading the whole thing every time v2: * Fixup logic for calculating the downstream port length to account for the fact that downstream port caps can be either 1 byte or 4 bytes long. We can actually skip fixing the max_clock/max_bpc helpers here since they all check for DP_DETAILED_CAP_INFO_AVAILABLE anyway. * Fix ret code check for drm_dp_dpcd_read v5: * Change name from drm_dp_downstream_read_info() to drm_dp_read_downstream_info() * Also, add "See Also" sections for the various downstream info functions (drm_dp_read_downstream_info(), drm_dp_downstream_max_clock(), drm_dp_downstream_max_bpc()) Reviewed-by: Sean Paul <sean@poorly.run> Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200826182456.322681-14-lyude@redhat.com
2020-08-31drm/nouveau/kms: Only use hpd_work for reprobing in HPD pathsLyude Paul7-36/+86
Currently we perform both short IRQ handling for DP, and connector reprobing in the HPD IRQ handler. However since we need to grab connection_mutex in order to reprobe a connector, in theory we could accidentally block ourselves from handling any short IRQs until after a modeset completes if a connector hotplug happens to occur in parallel with a modeset. I haven't seen this actually happen yet, but since we're cleaning up nouveau's hotplug handling code anyway and we already have a hpd worker, we can simply fix this by only relying on the HPD worker to actually reprobe connectors when we receive a HPD IRQ. We also add a mask to nouveau_drm to keep track of which connectors are waiting to be reprobed in response to an HPD IRQ. Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Ben Skeggs <bskeggs@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200826182456.322681-13-lyude@redhat.com
2020-08-31drm/nouveau/kms: Move drm_dp_cec_unset_edid() into nouveau_connector_detect()Lyude Paul1-3/+2
For whatever reason we currently unset the EDID for DP CEC support when responding to the connector being unplugged, instead of just doing it in nouveau_connector_detect() where we set the CEC EDID. This isn't really needed and could even potentially cause us to forget to unset the EDID if the connector is removed without a corresponding hpd event, so let's fix that. Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Ben Skeggs <bskeggs@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200826182456.322681-12-lyude@redhat.com
2020-08-31drm/nouveau/kms: Use new drm_dp_read_mst_cap() helper for checking MST capsLyude Paul1-13/+3
Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Ben Skeggs <bskeggs@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200826182456.322681-11-lyude@redhat.com
2020-08-31drm/i915/dp: Extract drm_dp_read_mst_cap()Lyude Paul2-16/+24
Just a tiny drive-by cleanup, we can consolidate i915's code for checking for MST support into a helper to be shared across drivers. v5: * Drop !!() * Move drm_dp_has_mst() out of header * Change name from drm_dp_has_mst() to drm_dp_read_mst_cap() Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Sean Paul <sean@poorly.run> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200826182456.322681-10-lyude@redhat.com
2020-08-31drm/nouveau/kms/nv50-: Refactor and cleanup DP HPD handlingLyude Paul7-137/+244
First some backstory here: Currently, we keep track of whether or not we've enabled MST or not by trying to piggy-back off the MST helpers. This means that in order to check whether MST is enabled or not, we actually need to grab drm_dp_mst_topology_mgr.lock. Back when I originally wrote this, I did this piggy-backing with the intention that I'd eventually be teaching our MST helpers how to recover when an MST device has stopped responding, which in turn would require the MST helpers having a way of disabling MST independently of the driver. Note that this was before I reworked locking in the MST helpers, so at the time we were sticking random things under &mgr->lock - which grabbing this lock was meant to protect against. This never came to fruition because doing such a reset safely turned out to be a lot more painful and impossible then it sounds, and also just risks us working around issues with our MST handlers that should be properly fixed instead. Even if it did though, simply calling drm_dp_mst_topology_mgr_set_mst() from the MST helpers (with the exception of when we're tearing down our MST managers, that's always OK) wouldn't have been a bad idea, since drivers like nouveau and i915 need to do their own book keeping immediately after disabling MST. So-implementing that would likely require adding a hook for helper-triggered MST disables anyway. So, fast forward to now - we want to start adding support for all of the miscellaneous bits of the DP protocol (for both SST and MST) we're missing before moving on to supporting more complicated features like supporting different BPP values on MST, DSC, etc. Since many of these features only exist on SST and make use of DP HPD IRQs, we want to be able to atomically check whether we're servicing an MST IRQ or SST IRQ in nouveau_connector_hotplug(). Currently we literally don't do this at all, and just handle any kind of possible DP IRQ we could get including ESIs - even if MST isn't actually enabled. This would be very complicated and difficult to fix if we need to hold &mgr->lock while handling SST IRQs to ensure that the MST topology state doesn't change under us. What we really want here is to do our own tracking of whether MST is enabled or not, similar to drivers like i915, and define our own locking order to decomplicate things and avoid hitting locking issues in the future. So, let's do this by refactoring our MST probing/enabling code to use our own MST bookkeeping, along with adding a lock for protecting DP state that needs to be checked outside of our connector probing functions. While we're at it, we also remove a bunch of unneeded steps we perform when probing/enabling MST: * Enabling bits in MSTM_CTRL before calling drm_dp_mst_topology_mgr_set_mst(). I don't think these ever actually did anything, since the nvif methods for enabling MST don't actually do anything DPCD related and merely indicate to nvkm that we've turned on MST. * Checking the MSTM_CTRL bit is intact when checking the state of an enabled MST topology in nv50_mstm_detect(). I just added this to be safe originally, but now that we try reading the DPCD when probing DP connectors it shouldn't be needed as that will abort our hotplug probing if the device was removed well before we start checking for MST.. * All of the duplicate DPCD version checks. This leaves us with much nicer looking code, a much more sensible locking scheme, and an easy way of checking whether MST is enabled or not for handling DP HPD IRQs. v2: * Get rid of accidental newlines v4: * Fix uninitialized usage of mstm in nv50_mstm_detect() - thanks kernel bot! Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Ben Skeggs <bskeggs@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200826182456.322681-9-lyude@redhat.com
2020-08-31drm/nouveau/kms/nv50-: Use drm_dp_dpcd_(readb|writeb)() in nv50_sor_disable()Lyude Paul1-4/+7
Just use drm_dp_dpcd_(readb|writeb)() so we get automatic DPCD logging Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Ben Skeggs <bskeggs@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200826182456.322681-8-lyude@redhat.com
2020-08-31drm/nouveau/kms: Search for encoders' connectors properlyLyude Paul9-38/+105
While the way we find the associated connector for an encoder is just fine for legacy modesetting, it's not correct for nv50+ since that uses atomic modesetting. For reference, see the drm_encoder kdocs. Fix this by removing nouveau_encoder_connector_get(), and replacing it with nv04_encoder_get_connector(), nv50_outp_get_old_connector(), and nv50_outp_get_new_connector(). v2: * Don't line-wrap for_each_(old|new)_connector_in_state in nv50_outp_get_(old|new)_connector() - sravn v3: * Fix potential uninitialized usage of nv_connector (needs to be initialized to NULL at the start). Thanks kernel test robot! v4: * Actually fix uninitialized nv_connector usage in nv50_audio_component_get_eld(). The previous fix wouldn't have worked since we would have started out with nv_connector == NULL, but wouldn't clear it after a single drm_for_each_encoder() iteration. Thanks again Kernel bot! Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Ben Skeggs <bskeggs@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200826182456.322681-7-lyude@redhat.com
2020-08-31drm/nouveau/kms: Don't clear DP_MST_CTRL DPCD in nv50_mstm_new()Lyude Paul1-11/+0
Since commit fa3cdf8d0b09 ("drm/nouveau: Reset MST branching unit before enabling") we've been clearing DP_MST_CTRL before we start enabling MST. Since then clearing DP_MST_CTRL in nv50_mstm_new() has been unnecessary and redundant, so let's remove it. Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Ben Skeggs <bskeggs@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200826182456.322681-6-lyude@redhat.com
2020-08-31drm/nouveau/kms/nv50-: Use macros for DP registers in nouveau_dp.cLyude Paul1-3/+5
No functional changes. Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Ben Skeggs <bskeggs@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200826182456.322681-5-lyude@redhat.com
2020-08-31drm/nouveau/kms/nv50-: Just use drm_dp_dpcd_read() in nouveau_dp.cLyude Paul1-8/+4
Since this actually logs accesses, we should probably always be using this imho… Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Ben Skeggs <bskeggs@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200826182456.322681-4-lyude@redhat.com
2020-08-31drm/nouveau/kms/nv50-: Remove open-coded drm_dp_read_desc()Lyude Paul3-23/+14
Noticed this while going through our DP code - we use an open-coded version of drm_dp_read_desc() instead of just using the helper, so change that. This will also let us use quirks in the future if we end up needing them. Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Ben Skeggs <bskeggs@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200826182456.322681-3-lyude@redhat.com
2020-08-31drm/nouveau/kms: Fix some indenting in nouveau_dp_detect()Lyude Paul1-4/+4
Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Ben Skeggs <bskeggs@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200826182456.322681-2-lyude@redhat.com
2020-08-31drm/amdkfd: Add GPU reset SMI eventMukul Joshi4-2/+39
Add support for reporting GPU reset events through SMI. KFD would report both pre and post GPU reset events. Signed-off-by: Mukul Joshi <mukul.joshi@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-31drm/sun4i: Fix dsi dcs long write functionOndrej Jirman1-2/+2
It's writing too much data. regmap_bulk_write expects number of register sized chunks to write, not a byte sized length of the bounce buffer. Bounce buffer needs to be padded too, so that regmap_bulk_write will not read past the end of the buffer. Fixes: 133add5b5ad4 ("drm/sun4i: Add Allwinner A31 MIPI-DSI controller support") Signed-off-by: Ondrej Jirman <megous@megous.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net> Link: https://patchwork.freedesktop.org/patch/msgid/20200828125032.937148-1-megous@megous.com
2020-08-31drm: virtio: fix kconfig dependency warningRandy Dunlap1-1/+1
Fix kconfig dependency warning by using a different Kconfig symbol. WARNING: unmet direct dependencies detected for VIRTIO_DMA_SHARED_BUFFER Depends on [n]: VIRTIO_MENU [=n] && DMA_SHARED_BUFFER [=y] Selected by [y]: - DRM_VIRTIO_GPU [=y] && HAS_IOMEM [=y] && DRM [=y] && VIRTIO [=y] && MMU [=y] Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Link: http://patchwork.freedesktop.org/patch/msgid/7481fb88-6b04-3726-57e0-0f513245c657@infradead.org Cc: David Airlie <airlied@linux.ie> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: dri-devel@lists.freedesktop.org Cc: virtualization@lists.linux-foundation.org Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-08-31drm/radeon/ttm: don't store driver copy of device pointer.Dave Airlie1-4/+4
This can be gotten back from bdev. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200826014428.828392-3-airlied@gmail.com
2020-08-31drm/amdgpu/ttm: remove unused parameter to move blitDave Airlie1-4/+4
Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200826014428.828392-2-airlied@gmail.com
2020-08-30drm/hisilicon: Removed the dependency on the mmuTian Tao1-1/+1
hibmc can only be used in ARM64 architectures, and mmu defaults to y in arch/arm64/Kconfig, so there is no need to add a dependency on mmu in hibmc's kconfig. Signed-off-by: Tian Tao <tiantao6@hisilicon.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/1598428528-49046-1-git-send-email-tiantao6@hisilicon.com
2020-08-31drm/ingenic: Fix driver not probing when IPU port is missingPaul Cercueil1-8/+11
Even if support for the IPU was compiled in, we may run on a device (e.g. the Qi LB60) where the IPU is not available, or simply with an old devicetree without the IPU node. In that case the ingenic-drm refused to probe. Fix the driver so that it will probe even if the IPU node is not present in devicetree (but then IPU support is disabled of course). v2: Take a different approach Fixes: fc1acf317b01 ("drm/ingenic: Add support for the IPU") Signed-off-by: Paul Cercueil <paul@crapouillou.net> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200827114404.36748-2-paul@crapouillou.net
2020-08-31drm/ingenic: Fix leak of device_node pointerPaul Cercueil1-0/+1
of_graph_get_remote_node() requires of_node_put() to be called on the device_node pointer when it's no more in use. Fixes: fc1acf317b01 ("drm/ingenic: Add support for the IPU") Signed-off-by: Paul Cercueil <paul@crapouillou.net> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200827114404.36748-1-paul@crapouillou.net
2020-08-30drm/vkms: avoid warning in vkms_get_vblank_timestampSidong Yang1-0/+5
This patch avoid the warning in vkms_get_vblank_timestamp when vblanks aren't enabled. When running igt test kms_cursor_crc just after vkms module, the warning raised like below. Initial value of vblank time is zero and hrtimer.node.expires is also zero if vblank aren't enabled before. vkms module isn't real hardware but just virtual hardware module. so vkms can't generate a resonable timestamp when hrtimer is off. it's best to grab the current time. [106444.464503] [IGT] kms_cursor_crc: starting subtest pipe-A-cursor-size-change [106444.471475] WARNING: CPU: 0 PID: 10109 at vkms_get_vblank_timestamp+0x42/0x50 [vkms] [106444.471511] CPU: 0 PID: 10109 Comm: kms_cursor_crc Tainted: G W OE 5.9.0-rc1+ #6 [106444.471514] RIP: 0010:vkms_get_vblank_timestamp+0x42/0x50 [vkms] [106444.471528] Call Trace: [106444.471551] drm_get_last_vbltimestamp+0xb9/0xd0 [drm] [106444.471566] drm_reset_vblank_timestamp+0x63/0xe0 [drm] [106444.471579] drm_crtc_vblank_on+0x85/0x150 [drm] [106444.471582] vkms_crtc_atomic_enable+0xe/0x10 [vkms] [106444.471592] drm_atomic_helper_commit_modeset_enables+0x1db/0x230 [drm_kms_helper] [106444.471594] vkms_atomic_commit_tail+0x38/0xc0 [vkms] [106444.471601] commit_tail+0x97/0x130 [drm_kms_helper] [106444.471608] drm_atomic_helper_commit+0x117/0x140 [drm_kms_helper] [106444.471622] drm_atomic_commit+0x4a/0x50 [drm] [106444.471629] drm_atomic_helper_set_config+0x63/0xb0 [drm_kms_helper] [106444.471642] drm_mode_setcrtc+0x1d9/0x7b0 [drm] [106444.471654] ? drm_mode_getcrtc+0x1a0/0x1a0 [drm] [106444.471666] drm_ioctl_kernel+0xb6/0x100 [drm] [106444.471677] drm_ioctl+0x3ad/0x470 [drm] [106444.471688] ? drm_mode_getcrtc+0x1a0/0x1a0 [drm] [106444.471692] ? tomoyo_file_ioctl+0x19/0x20 [106444.471694] __x64_sys_ioctl+0x96/0xd0 [106444.471697] do_syscall_64+0x37/0x80 [106444.471699] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com> Cc: Haneen Mohammed <hamohammed.sa@gmail.com> Cc: Melissa Wen <melissa.srw@gmail.com> Signed-off-by: Sidong Yang <realwakka@gmail.com> Reviewed-by: Melissa Wen <melissa.srw@gmail.com> Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200828124553.2178-1-realwakka@gmail.com
2020-08-30drm/vkms: add alpha-premultiplied color blendingMelissa Wen1-16/+39
The VKMS blend function was ignoring the alpha channel and just overwriting vaddr_src with vaddr_dst. This XRGB approach triggers a warning when running the kms_cursor_crc/cursor-alpha-transparent test case. In IGT, cairo_format_argb32 uses premultiplied alpha (according to documentation). Also current DRM assumption is that alpha is premultiplied. Therefore, this patch considers premultiplied alpha blending eq to compose vaddr_src with vaddr_dst. This change removes the following cursor-alpha-transparent warning: "Suspicious CRC: All values are 0." V2: - static for local functions - const for the read-only variable argb_src - replaces variable names - drops unnecessary comment Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com> Cc: Haneen Mohammed <hamohammed.sa@gmail.com> Signed-off-by: Melissa Wen <melissa.srw@gmail.com> Reviewed-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com> Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200825114532.abzdooluny2ekzvm@smtp.gmail.com
2020-08-30drm: panel: Fix bpc for OrtusTech COM43H4M85ULC panelLaurent Pinchart1-1/+1
The OrtusTech COM43H4M85ULC panel is a 18-bit RGB panel. Commit f098f168e91c ("drm: panel: Fix bus format for OrtusTech COM43H4M85ULC panel") has fixed the bus formats, but forgot to address the bpc value. Set it to 6. Fixes: f098f168e91c ("drm: panel: Fix bus format for OrtusTech COM43H4M85ULC panel") Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200824003254.21904-1-laurent.pinchart@ideasonboard.com
2020-08-29drm/bridge: Fix the dsi remote end-pointsVinod Koul1-2/+2
DSI end-points are supposed to be at node 0 and node 1 as per binding. So fix this and use node 0 and node 1 for dsi. Reported-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Fixes: 23278bf54afe ("drm/bridge: Introduce LT9611 DSI to HDMI bridge") Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200828074251.3788165-1-vkoul@kernel.org
2020-08-29drm/panel: rm67191: Remove CLOCK_NON_CONTINUOUS flagRobert Chiras1-2/+1
The flag MIPI_DSI_CLOCK_NON_CONTINUOUS was wrong used in the DSI driver, so it was added to this panel, but not necessary. So, remove this flag since it is not needed. Signed-off-by: Robert Chiras <robert.chiras@nxp.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/1598626713-5595-1-git-send-email-robert.chiras@oss.nxp.com
2020-08-29drm/panel: simple: Add AM-1280800N3TZQW-T00HJagan Teki1-0/+29
Add Ampire, AM-1280800N3TZQW-T00H 10.1" TFT LCD panel timings. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200829163328.249211-2-jagan@amarulasolutions.com
2020-08-28drm/i915/display: Ensure that ret is always initialized in icl_combo_phy_verify_stateNathan Chancellor1-2/+2
Clang warns: drivers/gpu/drm/i915/display/intel_combo_phy.c:268:3: warning: variable 'ret' is uninitialized when used here [-Wuninitialized] ret &= check_phy_reg(dev_priv, phy, ICL_PORT_TX_DW8_LN0(phy), ^~~ drivers/gpu/drm/i915/display/intel_combo_phy.c:261:10: note: initialize the variable 'ret' to silence this warning bool ret; ^ = 0 1 warning generated. In practice, the bug this warning appears to be concerned with would not actually matter because ret gets initialized to the return value of cnl_verify_procmon_ref_values. However, that does appear to be a bug since it means the first hunk of the patch this fixes won't actually do anything (since the values of check_phy_reg won't factor into the final ret value). Initialize ret to true then make all of the assignments a bitwise AND with itself so that the function always does what it should do. Fixes: 239bef676d8e ("drm/i915/display: Implement new combo phy initialization step") Link: https://github.com/ClangBuiltLinux/linux/issues/1094 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200828202830.7165-1-jose.souza@intel.com Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
2020-08-28drm/amdgpu: fix compiler warningsNirmoy Das1-4/+4
Fixes below compiler warnings: CC [M] drivers/gpu/drm/amd/amdgpu/amdgpu_device.o drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:381:1: warning: ‘static’ is not at beginning of declaration [-Wold-style-declaration] 381 | void static inline amdgpu_mm_wreg_mmio(struct amdgpu_device *adev, uint32_t reg, uint32_t v, uint32_t acc_flags) | ^~~~ drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:381:1: warning: ‘inline’ is not at beginning of declaration [-Wold-style-declaration] drivers/gpu/drm/amd/amdgpu/amdgpu_device.c: In function ‘amdgpu_device_fini’: drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:3381:6: warning: variable ‘r’ set but not used [-Wunused-but-set-variable] 3381 | int r; | ^ Signed-off-by: Nirmoy Das <nirmoy.das@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-28drm/i915/ehl: Update voltage swing tableJosé Roberto de Souza1-5/+5
Update with latest tuning in the table. v3: Fix values of to last columns. BSpec: 21257 Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200826201549.83658-3-jose.souza@intel.com
2020-08-28drm/i915/display/ehl: Use EHL DP tables for eDP ports without low power supportJosé Roberto de Souza1-3/+19
Reusing icl_get_combo_buf_trans() for eDP was causing the wrong table being used when the eDP port don't support low power voltage swing table. v2: Only use icl_combo_phy_ddi_translations_edp_hbr3 if low_vswing is set as EHL combo phy supports HBR3 (Matt R) Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Cc: Lee Shawn C <shawn.c.lee@intel.com> Cc: Khaled Almahallawy <khaled.almahallawy@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200826201549.83658-2-jose.souza@intel.com
2020-08-28drm/i915/display/tgl: Use TGL DP tables for eDP ports without low power supportJosé Roberto de Souza1-18/+32
Reusing icl_get_combo_buf_trans() for eDP was causing the wrong table being used when the eDP port don't support low power voltage swing table. Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Cc: Lee Shawn C <shawn.c.lee@intel.com> Cc: Khaled Almahallawy <khaled.almahallawy@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200826201549.83658-1-jose.souza@intel.com
2020-08-28drm/i915/tgl: Fix stepping WA matchingJosé Roberto de Souza6-15/+57
TGL made stepping a litte mess, workarounds refer to the stepping of the IP(GT or Display) not of the GPU stepping so it would already require the same solution as used in commit 96c5a15f9f39 ("drm/i915/kbl: Fix revision ID checks"). But to make things even more messy it have a different IP stepping mapping between SKUs and the same stepping revision of GT do not match the same HW between TGL U/Y and regular TGL. So it was required to have 2 different macros to check GT WAs while for Display we are able to use just one macro that uses the right revids table. All TGL workarounds checked and updated accordingly. v2: - removed TODO to check if WA 14010919138 applies to regular TGL. - fixed display stepping in regular TGL (Anusha) BSpec: 52890 BSpec: 55378 BSpec: 44455 Reviewed-by: Anusha Srivatsa <anusha.srivtsa@intel.com> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Cc: Penne Lee <penne.y.lee@intel.com> Cc: Guangyao Bai <guangyao.bai@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200827233943.400946-1-jose.souza@intel.com
2020-08-28Merge tag 'drm-fixes-2020-08-28' of git://anongit.freedesktop.org/drm/drmLinus Torvalds42-166/+302
Pull drm fixes from Dave Airlie: "As expected a bit of an rc3 uptick, amdgpu and msm are the main ones, one msm patch was from the merge window, but had dependencies and we dropped it until the other tree had landed. Otherwise it's a couple of fixes for core, and etnaviv, and single i915, exynos, omap fixes. I'm still tracking the Sandybridge gpu relocations issue, if we don't see much movement I might just queue up the reverts. I'll talk to Daniel next week once he's back from holidays. core: - Take modeset bkl for legacy drivers dp_mst: - Allow null crtc in dp_mst i915: - Fix command parser desc matching with masks amdgpu: - Misc display fixes - Backlight fixes - MPO fix for DCN1 - Fixes for Sienna Cichlid - Fixes for Navy Flounder - Vega SW CTF fixes - SMU fix for Raven - Fix a possible overflow in INFO ioctl - Gfx10 clockgating fix msm: - opp/bw scaling patch followup - frequency restoring fux - vblank in atomic commit fix - dpu modesetting fixes - fencing fix etnaviv: - scheduler interaction fix - gpu init regression fix exynos: - Just drop __iommu annotation to fix sparse warning omap: - locking state fix" * tag 'drm-fixes-2020-08-28' of git://anongit.freedesktop.org/drm/drm: (41 commits) drm/amd/display: Fix memleak in amdgpu_dm_mode_config_init drm/amdgpu: disable runtime pm for navy_flounder drm/amd/display: Retry AUX write when fail occurs drm/amdgpu: Fix buffer overflow in INFO ioctl drm/amd/powerplay: Fix hardmins not being sent to SMU for RV drm/amdgpu: use MODE1 reset for navy_flounder by default drm/amd/pm: correct the thermal alert temperature limit settings drm/amdgpu: add asd fw check before loading asd drm/amd/display: Keep current gain when ABM disable immediately drm/amd/display: Fix passive dongle mistaken as active dongle in EDID emulation drm/amd/display: Revert HDCP disable sequence change drm/amd/display: Send DISPLAY_OFF after power down on boot drm/amdgpu/gfx10: refine mgcg setting drm/amd/pm: correct Vega20 swctf limit setting drm/amd/pm: correct Vega12 swctf limit setting drm/amd/pm: correct Vega10 swctf limit setting drm/amd/pm: set VCN pg per instances drm/amd/pm: enable run_btc callback for sienna_cichlid drivers: gpu: amd: Initialize amdgpu_dm_backlight_caps object to 0 in amdgpu_dm_update_backlight_caps drm/amd/display: Reject overlay plane configurations in multi-display scenarios ...
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.