aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/gpu
AgeCommit message (Collapse)AuthorFilesLines
2020-08-04drm/amd/display: Display goes blank after instIgor Kravchenko3-3/+56
[why] Display goes blank after driver installation. Aux tuning parameters must be used for 2.x only. Wrong dc_golden_table offset was used. [How] Implement a new enc3_hw_init function without VBIOS constants usage to be called for 3.x Calculate dc_golden_table offset using sum of base dce_info offset and golden table offset Signed-off-by: Igor Kravchenko <Igor.Kravchenko@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-04drm/amd/display: Change null plane state swizzle mode to 4kb_sGeorge Shen1-2/+2
[Why] During SetPathMode and UpdatePlanes, the plane state can be null. We default to linear swizzle mode when plane state is null. This resulted in bandwidth validation failing when trying to set 8K60 mode (which previously passed validation during rebuild timing list). [How] Change the default swizzle mode from linear to 4kb_s and update pitch accordingly. Signed-off-by: George Shen <george.shen@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-04drm/amd/display: Use helper function to check for HDMI signalJinZe.Xu1-1/+1
[How] Use dc_is_hdmi_signal to determine signal type. Signed-off-by: JinZe.Xu <JinZe.Xu@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-04drm/amd/display: AMD OUI (DPCD 0x00300) skipped on some sinkAric Cyr1-16/+0
[Why] Sink OUI supported cap is not set so driver skips programming it. [How] Revert the change the skips OUI programming if the cap is not set Signed-off-by: Aric Cyr <aric.cyr@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-04drm/amd/display: Comments on how to use DSC debugfs some entriesEryk Brol1-0/+45
[why] Some of the DSC debugfs read enteries are missing comments explaining how to use and how to comprehend the results. Signed-off-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Reviewed-by: Mikita Lipski <Mikita.Lipski@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-04drm/amd/display: Fix logger contextHarry Wentland1-1/+2
[Why&How] use correct logger context Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Roman Li <Roman.Li@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-04drm/amd/display: DSC Bit target rate debugfs write entryEryk Brol4-1/+98
[Why] We need to be able to specify bits per pixel for DSC on any connector. [How] Overwrite computed DSC target rate in dsc_cfg, with requested value. Overwrites for both SST and MST connectors, but in different places, but the process is identical. Overwrites only if DSC is decided to be enabled on that connector. Signed-off-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Reviewed-by: Mikita Lipski <Mikita.Lipski@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-04drm/amd/display: populate new dml variableDmytro Laktyushkin1-1/+2
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-04drm/amd/display: Read VBIOS Golden Settings TblIgor Kravchenko10-9/+182
[Why] For ver.4.4 and higher VBIOS contains default setting table. {How] Read Golden Settings Table from VBIOS, apply Aux tuning parameters. Signed-off-by: Igor Kravchenko <Igor.Kravchenko@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-04drm/amd/display: Use parameter for call to set output muxEric Bernstein1-2/+5
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com> Reviewed-by: Chris Park <Chris.Park@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-04drm/amd/display: Update virtual stream encoderEric Bernstein1-0/+13
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-04drm/amd/display: DSC Slice height debugfs write entryEryk Brol4-1/+107
[Why] We need to be able to specify slice height for any connector's DSC [How] Overwrite computed parameters in dsc_cfg, with the value needed/ Overwrites for both SST and MST connectors, but in different places, but the process is identical. Overwrites only if DSC is decided to be enabled on that connector. Signed-off-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Reviewed-by: Mikita Lipski <Mikita.Lipski@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-04drm/amdgpu: added RAS EEPROM device support checkJohn Clements1-1/+16
updated RAS EEPROM init/threshold sequences to check for device support Reviewed-by: Guchun Chen <guchun.chen@amd.com> Signed-off-by: John Clements <john.clements@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-04drm/amdgpu: enable RAS support for sienna cichlidJohn Clements2-2/+7
enabled GECC error injection and query support Reviewed-by: Guchun Chen <guchun.chen@amd.com> Signed-off-by: John Clements <john.clements@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-04drm/amdgpu: introduce a new parameter to configure how many KCQ we want(v5)Monk Liu7-71/+74
what: the MQD's save and restore of KCQ (kernel compute queue) cost lots of clocks during world switch which impacts a lot to multi-VF performance how: introduce a paramter to control the number of KCQ to avoid performance drop if there is no kernel compute queue needed notes: this paramter only affects gfx 8/9/10 v2: refine namings v3: choose queues for each ring to that try best to cross pipes evenly. v4: fix indentation some cleanupsin the gfx_compute_queue_acquire() v5: further fix on indentations more cleanupsin gfx_compute_queue_acquire() TODO: in the future we will let hypervisor driver to set this paramter automatically thus no need for user to configure it through modprobe in virtual machine Signed-off-by: Monk Liu <Monk.Liu@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-04drm/amdgpu: update eeprom once specifying one bigger threshold(v3)Guchun Chen1-2/+28
During driver's probe, when it hits bad gpu tag in eeprom i2c init calling(the tag was set when reported bad page reaches bad page threshold in last driver's working loop), there are some strategys to deal with the cases: 1. when the module parameter amdgpu_bad_page_threshold = 0, that means page retirement feature is disabled, so just resetting the eeprom is fine. 2. When amdgpu_bad_page_threshold is not 0, and moreover, user sets one bigger valid data in order to make current boot up succeeds, correct eeprom header tag and do not break booting. 3. For other cases, driver's probe will be broken. v2: Just update eeprom header tag instead of resetting the whole table header when user sets one bigger threshold data. v3: Use dev_info/dev_err to print PCI device information, which helps in mGPU case. Signed-off-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-04drm/amdgpu: disable page reservation when amdgpu_bad_page_threshold = 0Guchun Chen2-4/+6
When amdgpu_bad_page_threshold = 0, bad page reservation stuffs are skipped in either UMC ECC irq or page retirement calling of sync flood isr. Signed-off-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-04drm/amdgpu: decouple sysfs creating of bad page nodeGuchun Chen1-21/+42
Bad page information should not be exposed by sysfs when bad page retirement is disabled, so decouple it from ras sysfs group creating, and add one guard before creating. Signed-off-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-04drm/amdgpu: add one definition for RAS's sysfs/debugfs name(v2)Guchun Chen1-5/+7
Add one definition for the RAS module's FS name. It's used in both debugfs and sysfs cases. v2: Use static variable instead of macro definition. Signed-off-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-04drm/amdgpu: restore ras flags when user resets eeprom(v2)Guchun Chen1-3/+10
RAS flags needs to be cleaned as well when user requires one clean eeprom. v2: RAS flags shall be restored after eeprom reset succeeds. Signed-off-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-04drm/amdgpu: break GPU recovery once it's in bad state(v4)Guchun Chen5-3/+79
When GPU executes recovery and retriving bad GPU tag from external eerpom device, the recovery will be broken and error message is printed as well for user's awareness. v2: Refine warning message in threshold reaching case, and fix spelling typo. v3: Fix explicit calling of bad gpu. v4: Rename function names. Signed-off-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-04drm/amdgpu: schedule ras recovery when reaching bad page threshold(v2)Guchun Chen1-1/+36
Once the bad page saved to eeprom reaches the configured threshold, ras recovery will be issued to notify user. v2: Fix spelling typo. Signed-off-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-04drm/amdgpu: skip bad page reservation once issuing from eeprom writeGuchun Chen2-5/+11
Once the ras recovery is issued from eeprom write itself, bad page reservation should be ignored, otherwise, recursive calling of writting to eeprom would happen. Signed-off-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-04drm/amdgpu: break driver init process when it's bad GPU(v5)Guchun Chen4-7/+36
When retrieving bad gpu tag from eeprom, GPU init should fail as the GPU needs to be retired for further check. v2: Fix spelling typo, correct the condition to detect bad gpu tag and refine error message. v3: Refine function argument name. v4: Fix missing check of returning value of i2c initialization error case. v5: Use dev_err to print PCI information in dmesg instead of DRM_ERROR. Signed-off-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-04drm/amdgpu: add bad gpu tag definitionGuchun Chen1-0/+3
This tag will be hired for bad gpu detection in eeprom's access. Signed-off-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-04drm/amdgpu: validate bad page threshold in ras(v3)Guchun Chen4-0/+58
Bad page threshold value should be valid in the range between -1 and max records length of eeprom. It could determine when saved bad pages exceed threshold value, and proceed corresponding actions. v2: When using the default typical value, it should be min value between typical value and eeprom max records length. v3: drop the case of setting bad_page_cnt_threshold to be 0xFFFFFFFF, as it confuses user. Signed-off-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-04drm/amdgpu: add bad page count threshold in module parameter(v3)Guchun Chen2-0/+12
bad_page_threshold could be configured to enable/disable the associated bad page retirement feature in RAS. When it's -1, ras will use typical bad page failure value to handle bad page retirement. When it's 0, disable bad page retirement, and no bad page will be recorded and saved. For other valid value, driver will use this manual value as the threshold value of totoal bad pages. v2: correct documentation of this parameter. v3: remove confused statement in documentation. Signed-off-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-04drm/amdkfd: Replace bitmask with event idx in SMI event msgMukul Joshi1-11/+13
Event bitmask is a 64-bit mask with only 1 bit set. Sending this event bitmask in KFD SMI event message is both wasteful of memory and potentially limiting to only 64 events. Instead send event index in SMI event message. Please note this change does not break the ABI for the two event types defined so far. The new index is identical to the mask used before. Signed-off-by: Mukul Joshi <mukul.joshi@amd.com> Suggested-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-04Merge tag 'uninit-macro-v5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linuxLinus Torvalds7-10/+10
Pull uninitialized_var() macro removal from Kees Cook: "This is long overdue, and has hidden too many bugs over the years. The series has several "by hand" fixes, and then a trivial treewide replacement. - Clean up non-trivial uses of uninitialized_var() - Update documentation and checkpatch for uninitialized_var() removal - Treewide removal of uninitialized_var()" * tag 'uninit-macro-v5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: compiler: Remove uninitialized_var() macro treewide: Remove uninitialized_var() usage checkpatch: Remove awareness of uninitialized_var() macro mm/debug_vm_pgtable: Remove uninitialized_var() usage f2fs: Eliminate usage of uninitialized_var() macro media: sur40: Remove uninitialized_var() usage KVM: PPC: Book3S PR: Remove uninitialized_var() usage clk: spear: Remove uninitialized_var() usage clk: st: Remove uninitialized_var() usage spi: davinci: Remove uninitialized_var() usage ide: Remove uninitialized_var() usage rtlwifi: rtl8192cu: Remove uninitialized_var() usage b43: Remove uninitialized_var() usage drbd: Remove uninitialized_var() usage x86/mm/numa: Remove uninitialized_var() usage docs: deprecated.rst: Add uninitialized_var()
2020-08-04drm: fix drm_dp_mst_port refcount leaks in drm_dp_mst_allocate_vcpiXin Xiong1-3/+4
drm_dp_mst_allocate_vcpi() invokes drm_dp_mst_topology_get_port_validated(), which increases the refcount of the "port". These reference counting issues take place in two exception handling paths separately. Either when “slots” is less than 0 or when drm_dp_init_vcpi() returns a negative value, the function forgets to reduce the refcnt increased drm_dp_mst_topology_get_port_validated(), which results in a refcount leak. Fix these issues by pulling up the error handling when "slots" is less than 0, and calling drm_dp_mst_topology_put_port() before termination when drm_dp_init_vcpi() returns a negative value. Fixes: 1e797f556c61 ("drm/dp: Split drm_dp_mst_allocate_vcpi") Cc: <stable@vger.kernel.org> # v4.12+ Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn> Signed-off-by: Xin Tan <tanxin.ctf@gmail.com> Signed-off-by: Xin Xiong <xiongx18@fudan.edu.cn> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200719154545.GA41231@xin-virtual-machine
2020-08-04drm: Added orientation quirk for ASUS tablet model T103HAFMarius Iacob1-0/+6
Signed-off-by: Marius Iacob <themariusus@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200801123445.1514567-1-themariusus@gmail.com
2020-08-04drm/omap: force runtime PM suspend on system suspendTomi Valkeinen4-0/+4
Use SET_LATE_SYSTEM_SLEEP_PM_OPS in DSS submodules to force runtime PM suspend and resume. We use suspend late version so that omapdrm's system suspend callback is called first, as that will disable all the display outputs after which it's safe to force DSS into suspend. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200618095153.611071-1-tomi.valkeinen@ti.com Acked-by: Tony Lindgren <tony@atomide.com> Fixes: cef766300353 ("drm/omap: Prepare DSS for probing without legacy platform data") Cc: stable@vger.kernel.org # v5.7+ Tested-by: Tony Lindgren <tony@atomide.com>
2020-08-04drm/tidss: fix modeset init for DPI panelsTomi Valkeinen1-1/+1
The connector type for DISPC's DPI videoport was set the LVDS instead of DPI. This causes any DPI panel setup to fail with tidss, making all DPI panels unusable. Fix this by using correct connector type. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Fixes: 32a1795f57eecc39749017 ("drm/tidss: New driver for TI Keystone platform Display SubSystem") Cc: stable@vger.kernel.org # v5.7+ Link: https://patchwork.freedesktop.org/patch/msgid/20200604080214.107159-1-tomi.valkeinen@ti.com Reviewed-by: Jyri Sarha <jsarha@ti.com>
2020-08-03Merge tag 'arm-drivers-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds1-0/+1
Pull ARM SoC driver updates from Arnd Bergmann: "A couple of subsystems have their own subsystem maintainers but choose to have the code merged through the soc tree as upstream, as the code tends to be used across multiple SoCs or has SoC specific drivers itself: - memory controllers: Krzysztof Kozlowski takes ownership of the drivers/memory subsystem and its drivers, starting out with a set of cleanup patches. A larger driver for the Tegra memory controller that was accidentally missed for v5.8 is now added. - reset controllers: Only minor updates to drivers/reset this time - firmware: The "turris mox" firmware driver gains support for signed firmware blobs The tegra firmware driver gets extended to export some debug information Various updates to i.MX firmware drivers, mostly cosmetic - ARM SCMI/SCPI: A new mechanism for platform notifications is added, among a number of minor changes. - optee: Probing of the TEE bus is rewritten to better support detection of devices that depend on the tee-supplicant user space. A new firmware based trusted platform module (fTPM) driver is added based on OP-TEE - SoC attributes: A new driver is added to provide a generic soc_device for identifying a machine through the SMCCC ARCH_SOC_ID firmware interface rather than by probing SoC family specific registers. The series also contains some cleanups to the common soc_device code. There are also a number of updates to SoC specific drivers, the main ones are: - Mediatek cmdq driver gains a few in-kernel interfaces - Minor updates to Qualcomm RPMh, socinfo, rpm drivers, mostly adding support for additional SoC variants - The Qualcomm GENI core code gains interconnect path voting and performance level support, and integrating this into a number of device drivers. - A new driver for Samsung Exynos5800 voltage coupler for - Renesas RZ/G2H (R8A774E1) SoC support gets added to a couple of SoC specific device drivers - Updates to the TI K3 Ring Accelerator driver" * tag 'arm-drivers-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (164 commits) soc: qcom: geni: Fix unused label warning soc: qcom: smd-rpm: Fix kerneldoc memory: jz4780_nemc: Only request IO memory the driver will use soc: qcom: pdr: Reorder the PD state indication ack MAINTAINERS: Add Git repository for memory controller drivers memory: brcmstb_dpfe: Fix language typo memory: samsung: exynos5422-dmc: Correct white space issues memory: samsung: exynos-srom: Correct alignment memory: pl172: Enclose macro argument usage in parenthesis memory: of: Correct kerneldoc memory: omap-gpmc: Fix language typo memory: omap-gpmc: Correct white space issues memory: omap-gpmc: Use 'unsigned int' for consistency memory: omap-gpmc: Enclose macro argument usage in parenthesis memory: omap-gpmc: Correct kerneldoc memory: mvebu-devbus: Align with open parenthesis memory: mvebu-devbus: Add missing braces to all arms of if statement memory: bt1-l2-ctl: Add blank lines after declarations soc: TI knav_qmss: make symbol 'knav_acc_range_ops' static firmware: ti_sci: Replace HTTP links with HTTPS ones ...
2020-08-03virtio: virtio_has_iommu_quirk -> virtio_has_dma_quirkMichael S. Tsirkin2-3/+3
Now that the corresponding feature bit has been renamed, rename the quirk too - it's about special ways to do DMA, not necessarily about the IOMMU. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-08-03drm/mgag200: Add support for G200 desktop cardsThomas Zimmermann4-8/+231
This patch adds support for G200 desktop cards. We can reuse the whole memory and modesetting code. A few PCI and DAC register values have to be updated accordingly. The most significant change is in the PLL setup. The driver parses the device's BIOS to retrieve clock limits and reference clocks. With no BIOS found, safe defaults are being used. v2: * copy BIOS ROM to system memory and access with regular load/store; resolves potential HW limitations * fix some stray whitespaces Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Co-developed-by: Egbert Eich <eich@suse.com> Signed-off-by: Egbert Eich <eich@suse.com> Co-developed-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200730102844.10995-9-tzimmermann@suse.de
2020-08-03drm/mgag200: Move G200SE's unique id into model-specific dataThomas Zimmermann3-15/+30
The unique revision id is only useful for G200SE devices. Store the value in model-specific data within struct mga_device. While at it, the patch also adds an init helper for the value. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200730102844.10995-8-tzimmermann@suse.de
2020-08-03drm/mgag200: Clear <page> field during MM initThomas Zimmermann2-5/+3
The modesetting code initialized the memory-related register CRTCEXT4. Move this code to MM initialization. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200730102844.10995-7-tzimmermann@suse.de
2020-08-03drm/mgag200: Set MISC memory flags in mm init codeThomas Zimmermann2-3/+7
The modesetting code initialized several memory-related flags in the MISC register. Move this code to MM initialization. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200730102844.10995-6-tzimmermann@suse.de
2020-08-03drm/mgag200: Enable MGA mode during device register initializationThomas Zimmermann3-5/+8
MGA cards can run in traditional VGA mode or an enhanced MGA mode; with the latter being required for KMS. So far, MGA mode was enabled during modesetting. As it's fundamental for device operation, the patch moves it next to the device register setup. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200730102844.10995-5-tzimmermann@suse.de
2020-08-03drm/mgag200: Initialize PCI registers early during device setupThomas Zimmermann3-43/+31
So far, PCI option registers were initialized as part of modesetting, which is late in the process. As these registers control fundamental operation, they should be set early. The patch moves the PCI option handling into device register setup, before even the device MMIO memory is being mapped. No functional changes made. Moving the PCI code next to the device-register setup also allows to remove the has_sdram field from struct mga_device. The state is now local to the init helper. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200730102844.10995-4-tzimmermann@suse.de
2020-08-03drm/mgag200: Move register initialization into helper functionThomas Zimmermann2-7/+32
The mgag200 driver maps registers into the address space. Move the code into a separate helper function. No functional changes. One small difference is in the handling of SDRAM/SGRAM. MGA devices can come with either SDRAM or SGRAM. So far, the driver checked for SDRAM, which is the common case. The patch moves this code into a separate helper and checks for SGRAM, which is the special case. The test itself is the same as before. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200730102844.10995-3-tzimmermann@suse.de
2020-08-03drm/mgag200: Enable caching for SHMEM pagesThomas Zimmermann1-0/+1
SHMEM pages use write-combine caching by default, but can also use the platform's default page caching. Doing so may improve the performance of I/O on the framebuffer. Mgag200's hardware does not access framebuffer pages directly (i.e., via DMA), so enabling caching does not have an effect on consistency of the framebuffer memory or the displayed data. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200730102844.10995-2-tzimmermann@suse.de
2020-08-03drm/ast: Managed device releaseThomas Zimmermann3-21/+19
This turns the ast's device cleanup code into a managed release helper function. Note that the code uses devres helpers. The release function switches the device back to VGA mode and therefore runs during HW device cleanup; not at DRM device cleanup. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200730135206.30239-10-tzimmermann@suse.de
2020-08-03drm/ast: Manage release of firmware backup memoryThomas Zimmermann1-4/+3
The ast driver keeps a backup copy of the DP501 encoder's firmware. This patch adds managed release of the allocated memory. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200730135206.30239-9-tzimmermann@suse.de
2020-08-03drm/ast: Managed release of ast firmwareThomas Zimmermann3-13/+14
The ast driver loads firmware for the DP501 display encoder. The patch replaces the removal code with a managed release function. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200730135206.30239-8-tzimmermann@suse.de
2020-08-03drm/ast: Embed struct drm_device in struct ast_privateThomas Zimmermann7-38/+22
Turns struct ast_private into a subclass of struct drm_device by embedding the latter. This allows for using DRM's managed device allocation. The use of struct drm_device.dev_private is deprecated. The patch converts the last remaining users to to_ast_private(). Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200730135206.30239-7-tzimmermann@suse.de
2020-08-03drm/ast: Don't use ast->dev if dev is availableThomas Zimmermann2-3/+3
Several places in ast use ast->dev, when a dev pointer is already available within the function. Remove the extra indirection. No functional changes made. This is just a small cleanup before embedding the DRM device instance in struct ast_private. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200730135206.30239-6-tzimmermann@suse.de
2020-08-03drm/ast: Replace struct_drm_device.dev_private with to_ast_private()Thomas Zimmermann2-2/+2
The ast code still references dev_private in several place when looking up the ast device structure. Convert the remaining locations to use to_ast_private(). Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200730135206.30239-5-tzimmermann@suse.de
2020-08-03drm/ast: Replace driver load/unload functions with device create/destroyThomas Zimmermann3-21/+33
The ast driver's load and unload functions are left-overs from when struct drm_driver.load/unload was still in use. The PCI probe helper allocated the DRM device and ran load to initialize it. This patch replaces this code with device create and destroy. The main difference is that the device's create function allocates the DRM device and ast structures in the same place. This will be required for switching ast to managed allocations. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200730135206.30239-4-tzimmermann@suse.de
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.