aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/gpu
AgeCommit message (Collapse)AuthorFilesLines
2020-04-07drm/nouveau/svm: remove useless SVM range checkRalph Campbell1-3/+0
When nouveau processes GPU faults, it checks to see if the fault address falls within the "unmanaged" range which is reserved for fixed allocations instead of addresses chosen by the core mm code. If start is greater than or equal to svmm->unmanaged.limit, then limit will also be greater than svmm->unmanaged.limit which is greater than svmm->unmanaged.start and the start = max_t(u64, start, svmm->unmanaged.limit) will change nothing. Just remove the useless lines of code. Signed-off-by: Ralph Campbell <rcampbell@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2020-04-07drm/nouveau/svm: check for SVM initialized before migratingRalph Campbell1-0/+5
When migrating system memory to GPU memory, check that SVM has been enabled. Even though most errors can be ignored since migration is a performance optimization, return an error because this is a violation of the API. Signed-off-by: Ralph Campbell <rcampbell@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2020-04-07drm/nouveau/svm: fix vma range check for migrationRalph Campbell1-0/+1
find_vma_intersection(mm, start, end) only guarantees that end is greater than or equal to vma->vm_start but doesn't guarantee that start is greater than or equal to vma->vm_start. The calculation for the intersecting range in nouveau_svmm_bind() isn't accounting for this and can call migrate_vma_setup() with a starting address less than vma->vm_start. This results in migrate_vma_setup() returning -EINVAL for the range instead of nouveau skipping that part of the range and migrating the rest. Signed-off-by: Ralph Campbell <rcampbell@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2020-04-07drm/nouveau: remove checks for return value of debugfs functionsWambui Karuga1-12/+8
As there is no need to check for the return value of debugfs_create_file and drm_debugfs_create_files, remove unnecessary checks and error handling in nouveau_drm_debugfs_init. Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2020-04-07drm/nouveau/ttm: evict other IO mappings when running out of BAR1 spaceBen Skeggs1-2/+7
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2020-04-06drm/dp_mst: Don't drop NAKs for down responsesLyude Paul1-1/+0
It looks like that when we introduced the ability to handle multiple down requests at once, we accidentally started dropping NAK replies - causing sideband messages which got NAK'd to seemingly timeout and cause all sorts of weirdness. So, fix this by making sure we don't return from drm_dp_mst_handle_down_rep() early, but instead treat NAKs like any other message. Signed-off-by: Lyude Paul <lyude@redhat.com> Fixes: fbc821c4a506 ("drm/mst: Support simultaneous down replies") Cc: Wayne Lin <Wayne.Lin@amd.com> Cc: Wayne Lin <waynelin@amd.com> Cc: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200403200325.885628-1-lyude@redhat.com Reviewed-by: Sean Paul <sean@poorly.run>
2020-04-06drm/dp_mst: Fix NULL deref in drm_dp_get_one_sb_msg()Lyude Paul1-1/+2
While we don't need this function to store an mstb anywhere for UP requests since we process them asynchronously, we do need to make sure that we don't try to write to **mstb for UP requests otherwise we'll cause a NULL pointer deref: RIP: 0010:drm_dp_get_one_sb_msg+0x4b/0x460 [drm_kms_helper] Call Trace: ? vprintk_emit+0x16a/0x230 ? drm_dp_mst_hpd_irq+0x133/0x1010 [drm_kms_helper] drm_dp_mst_hpd_irq+0x133/0x1010 [drm_kms_helper] ? __drm_dbg+0x87/0x90 [drm] ? intel_dp_hpd_pulse+0x24b/0x400 [i915] intel_dp_hpd_pulse+0x24b/0x400 [i915] i915_digport_work_func+0xd6/0x160 [i915] process_one_work+0x1a9/0x370 worker_thread+0x4d/0x3a0 kthread+0xf9/0x130 ? process_one_work+0x370/0x370 ? kthread_park+0x90/0x90 ret_from_fork+0x35/0x40 So, fix this. Signed-off-by: Lyude Paul <lyude@redhat.com> Fixes: fbc821c4a506 ("drm/mst: Support simultaneous down replies") Cc: Wayne Lin <Wayne.Lin@amd.com> Cc: Lyude Paul <lyude@redhat.com> Cc: Wayne Lin <waynelin@amd.com> Cc: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200406193352.1245985-1-lyude@redhat.com Reviewed-by: Sean Paul <sean@poorly.run>
2020-04-06drm/i915/gem: Wait until the context is finally retired before releasing enginesChris Wilson1-10/+6
If we want to percolate information back from the HW, up through the GEM context, we need to wait until the intel_context is scheduled out for the last time. This is handled by the retirement of the intel_context's barrier, i.e. by listening to the pulse after the notional unpin. So wait until the intel_context is finally retired before releasing the engine, so that we can inspect the final context state and pass it on. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200406155840.1728-3-chris@chris-wilson.co.uk
2020-04-06drm/i915: Allow asynchronous waits on the i915_active barriersChris Wilson2-10/+64
Allow the caller to also wait upon the barriers stored in i915_active. v2: Hook up i915_request_await_active(I915_ACTIVE_AWAIT_BARRIER) as well for completeness, and avoid the lazy GEM_BUG_ON()! v3: Pull flush_lazy_signals() under the active-ref protection as it too walks the rbtree and so we must be careful that we do not free it as we iterate. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200406155840.1728-2-chris@chris-wilson.co.uk
2020-04-06drm/i915: Make exclusive awaits on i915_active optionalChris Wilson4-6/+9
Later use will require asynchronous waits on the active timelines, but will not utilize an async wait on the exclusive channel. Make the await on the exclusive fence explicit in the selection flags. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200406155840.1728-1-chris@chris-wilson.co.uk
2020-04-06drm/i915/gem: Flush all the reloc_gpu batchChris Wilson1-3/+5
__i915_gem_object_flush_map() takes a byte range, so feed it the written bytes and do not mistake the u32 index as bytes! Fixes: a679f58d0510 ("drm/i915: Flush pages on acquisition") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Matthew Auld <matthew.william.auld@gmail.com> Cc: <stable@vger.kernel.org> # v5.2+ Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200406114821.10949-1-chris@chris-wilson.co.uk (cherry picked from commit 30c88a47f1abd5744908d3681f54dcf823fe2a12) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2020-04-06drm/i915/gem: Ignore readonly failures when updating relocsChris Wilson1-4/+2
If the user passes in a readonly reloc[], by the time we notice we have already committed to modifying the execobjects, or have indeed done so already. Reporting the failure just compounds the issue as we have no second pass to fall back to anymore. "Be damned if you do, and damned if you don't." Testcase: igt/gem_exec_reloc/readonly Fixes: 7dc8f1143778 ("drm/i915/gem: Drop relocation slowpath") References: fddcd00a49e9 ("drm/i915: Force the slow path after a user-write error") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Andi Shyti <andi.shyti@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200331162150.3635-1-chris@chris-wilson.co.uk (cherry picked from commit 97a37c919f6262fe75afc4a4eb838093bf18b032) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2020-04-06drm/i915/gt: Fill all the unused space in the GGTTChris Wilson1-10/+27
When we allocate space in the GGTT we may have to allocate a larger region than will be populated by the object to accommodate fencing. Make sure that this space beyond the end of the buffer points safely into scratch space, in case the HW tries to access it anyway (e.g. fenced access to the last tile row). v2: Preemptively / conservatively guard gen6 ggtt as well. Reported-by: Imre Deak <imre.deak@intel.com> References: https://gitlab.freedesktop.org/drm/intel/-/issues/1554 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: stable@vger.kernel.org Reviewed-by: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200331152348.26946-1-chris@chris-wilson.co.uk (cherry picked from commit 4d6c18590870fbac1e65dde5e01e621c8e0ca096) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2020-04-06drm/i915/dp: Return the right vswing tablesJosé Roberto de Souza1-2/+3
DDI ports have its encoders initialized with INTEL_OUTPUT_DDI type and later eDP ports that have the type changed to INTEL_OUTPUT_EDP. But for all other DDI ports it can drive HDMI or DP depending on what user connects to the ports. ehl_get_combo_buf_trans() and tgl_get_combo_buf_trans() was checking for INTEL_OUTPUT_DP that was never true, causing wrong vswing tables being used. So here replacing the INTEL_OUTPUT_DP checks by the valid output types that this functions receives as parameters. HDMI cases will be correctly handled as it do not use encoder->type, instead it calls the functions with INTEL_OUTPUT_HDMI as type parameter and HDMI don't have retraining. v2: changed INTEL_OUTPUT_DDI to INTEL_OUTPUT_EDP and INTEL_OUTPUT_HDMI Fixes: bd3cf6f7ce20 ("drm/i915/dp/tgl+: Update combo phy vswing tables") Cc: Clinton A Taylor <clinton.a.taylor@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200330210044.130510-1-jose.souza@intel.com (cherry picked from commit 70988115ac69ecc249aa0f8e8265e8daf87bc28c) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2020-04-06drm/i915/icl+: Don't enable DDI IO power on a TypeC port in TBT modeImre Deak1-1/+5
The DDI IO power well must not be enabled for a TypeC port in TBT mode, ensure this during driver loading/system resume. This gets rid of error messages like [drm] *ERROR* power well DDI E TC2 IO state mismatch (refcount 1/enabled 0) and avoids leaking the power ref when disabling the output. Cc: <stable@vger.kernel.org> # v5.4+ Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200330152244.11316-1-imre.deak@intel.com (cherry picked from commit f77a2db27f26c3ccba0681f7e89fef083718f07f) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2020-04-06drm/i915/gem: Take DBG_FORCE_RELOC into account prior to using reloc_gpuChris Wilson1-3/+12
If we set the debug flag to force ourselves not to relocate via the gpu, do not relocate via the gpu. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200406123616.7334-1-chris@chris-wilson.co.uk
2020-04-06drm/i915/gem: Flush all the reloc_gpu batchChris Wilson1-3/+5
__i915_gem_object_flush_map() takes a byte range, so feed it the written bytes and do not mistake the u32 index as bytes! Fixes: a679f58d0510 ("drm/i915: Flush pages on acquisition") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Matthew Auld <matthew.william.auld@gmail.com> Cc: <stable@vger.kernel.org> # v5.2+ Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200406114821.10949-1-chris@chris-wilson.co.uk
2020-04-06drm/i915: Extend hotplug detect retry on TypeC connectors to 5 secondsImre Deak1-1/+11
On TypeC ports if a sink deasserts/reasserts its HPD signal, generating a hotplug interrupt without the sink getting unplugged/replugged from the connector, there can be an up to 3 seconds delay until the AUX channel gets functional. To avoid detection failures this delay causes retry the detection for 5 seconds. I noticed this on ICL/TGL RVPs and a DELL XPS 13 7390 ICL laptop. References: https://gitlab.freedesktop.org/drm/intel/issues/1067 Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200330095425.29113-2-imre.deak@intel.com
2020-04-06drm/i915: Add a retry counter for hotplug detect retriesImre Deak7-24/+26
On TypeC connectors we need to retry the detection after hotplug events for a longer time, so add a retry counter to support this. The next patch will add detection retries on TypeC ports needing this. Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200330095425.29113-1-imre.deak@intel.com
2020-04-06drm/virtio: fix OOB in virtio_gpu_object_createJiri Slaby1-6/+8
After commit f651c8b05542 ("drm/virtio: factor out the sg_table from virtio_gpu_object"), virtio_gpu_create_object allocates too small space to fit everything in. It is because it allocates struct virtio_gpu_object, but should allocate a newly added struct virtio_gpu_object_shmem which has 2 more members. So fix that by using correct type in virtio_gpu_create_object. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: http://patchwork.freedesktop.org/patch/msgid/20200319100421.16267-1-jslaby@suse.cz Fixes: f651c8b05542 ("drm/virtio: factor out the sg_table from virtio_gpu_object") Cc: Gurchetan Singh <gurchetansingh@chromium.org> Cc: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> (cherry picked from commit 0666a8d7f6a4530440e59f2d22ed4091f4d3818c)
2020-04-06drm/sun4i: tcon: Delete an error message in sun4i_tcon_init_irq()Markus Elfring1-3/+1
The function “platform_get_irq” can log an error already. Thus omit a redundant message for the exception handling in the calling function. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/5a6cf5a7-3f27-5425-4d6a-550a17bc51e3@web.de
2020-04-05drm/bridge: fix kernel-doc warning in panel.cSam Ravnborg1-0/+1
Add missing documentation to fix following warning: panel.c:303: warning: Function parameter or member 'bridge' not described in 'drm_panel_bridge_connector' Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Boris Brezillon <boris.brezillon@collabora.com> Cc: Mihail Atanassov <Mihail.Atanassov@arm.com> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Jernej Skrabec <jernej.skrabec@siol.net> Link: https://patchwork.freedesktop.org/patch/msgid/20200328132025.19910-7-sam@ravnborg.org
2020-04-05Merge tag 'trace-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds4-0/+21
Pull tracing updates from Steven Rostedt: "New tracing features: - The ring buffer is no longer disabled when reading the trace file. The trace_pipe file was made to be used for live tracing and reading as it acted like the normal producer/consumer. As the trace file would not consume the data, the easy way of handling it was to just disable writes to the ring buffer. This came to a surprise to the BPF folks who complained about lost events due to reading. This is no longer an issue. If someone wants to keep the old disabling there's a new option "pause-on-trace" that can be set. - New set_ftrace_notrace_pid file. PIDs in this file will not be traced by the function tracer. Similar to set_ftrace_pid, which makes the function tracer only trace those tasks with PIDs in the file, the set_ftrace_notrace_pid does the reverse. - New set_event_notrace_pid file. PIDs in this file will cause events not to be traced if triggered by a task with a matching PID. Similar to the set_event_pid file but will not be traced. Note, sched_waking and sched_switch events may still be traced if one of the tasks referenced by those events contains a PID that is allowed to be traced. Tracing related features: - New bootconfig option, that is attached to the initrd file. If bootconfig is on the command line, then the initrd file is searched looking for a bootconfig appended at the end. - New GPU tracepoint infrastructure to help the gfx drivers to get off debugfs (acked by Greg Kroah-Hartman) And other minor updates and fixes" * tag 'trace-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (27 commits) tracing: Do not allocate buffer in trace_find_next_entry() in atomic tracing: Add documentation on set_ftrace_notrace_pid and set_event_notrace_pid selftests/ftrace: Add test to test new set_event_notrace_pid file selftests/ftrace: Add test to test new set_ftrace_notrace_pid file tracing: Create set_event_notrace_pid to not trace tasks ftrace: Create set_ftrace_notrace_pid to not trace tasks ftrace: Make function trace pid filtering a bit more exact ftrace/kprobe: Show the maxactive number on kprobe_events tracing: Have the document reflect that the trace file keeps tracing enabled ring-buffer/tracing: Have iterator acknowledge dropped events tracing: Do not disable tracing when reading the trace file ring-buffer: Do not disable recording when there is an iterator ring-buffer: Make resize disable per cpu buffer instead of total buffer ring-buffer: Optimize rb_iter_head_event() ring-buffer: Do not die if rb_iter_peek() fails more than thrice ring-buffer: Have rb_iter_head_event() handle concurrent writer ring-buffer: Add page_stamp to iterator for synchronization ring-buffer: Rename ring_buffer_read() to read_buffer_iter_advance() ring-buffer: Have ring_buffer_empty() not depend on tracing stopped tracing: Save off entry when peeking at next entry ...
2020-04-05drm/prime: fix extracting of the DMA addresses from a scatterlistMarek Szyprowski1-12/+25
Scatterlist elements contains both pages and DMA addresses, but one should not assume 1:1 relation between them. The sg->length is the size of the physical memory chunk described by the sg->page, while sg_dma_len(sg) is the size of the DMA (IO virtual) chunk described by the sg_dma_address(sg). The proper way of extracting both: pages and DMA addresses of the whole buffer described by a scatterlist it to iterate independently over the sg->pages/sg->length and sg_dma_address(sg)/sg_dma_len(sg) entries. Fixes: 42e67b479eab ("drm/prime: use dma length macro when mapping sg") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200327162126.29705-1-m.szyprowski@samsung.com Cc: stable@vger.kernel.org
2020-04-04Merge tag 'drm-next-2020-04-03-1' of git://anongit.freedesktop.org/drm/drmLinus Torvalds9-7/+570
Pull drm hugepage support from Dave Airlie: "This adds support for hugepages to TTM and has been tested with the vmwgfx drivers, though I expect other drivers to start using it" * tag 'drm-next-2020-04-03-1' of git://anongit.freedesktop.org/drm/drm: drm/vmwgfx: Hook up the helpers to align buffer objects drm/vmwgfx: Introduce a huge page aligning TTM range manager drm: Add a drm_get_unmapped_area() helper drm/vmwgfx: Support huge page faults drm/ttm, drm/vmwgfx: Support huge TTM pagefaults mm: Add vmf_insert_pfn_xxx_prot() for huge page-table entries mm: Split huge pages on write-notify or COW mm: Introduce vma_is_special_huge fs: Constify vma argument to vma_is_dax
2020-04-04Merge drm/drm-next into drm-misc-next-fixesMaxime Ripard467-8208/+16485
Alex needs v5.6 into drm-misc-next-fixes to merge a fix for a regression in the scatterlist processing in PRIME. Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2020-04-03Merge tag 'arm-drivers-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds2-11/+39
Pull ARM driver updates from Arnd Bergmann: "These are the usual updates for SoC specific device drivers and related subsystems that don't have their own top-level maintainers: - ARM SCMI/SCPI updates to allow pluggable transport layers - TEE subsystem cleanups - A new driver for the Amlogic secure power domain controller - Various driver updates for the NXP Layerscape DPAA2, NXP i.MX SCU and TI OMAP2+ sysc drivers. - Qualcomm SoC driver updates, including a new library module for "protection domain" notifications - Lots of smaller bugfixes and cleanups in other drivers" * tag 'arm-drivers-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (70 commits) soc: fsl: qe: fix sparse warnings for ucc_slow.c soc: fsl: qe: ucc_slow: remove 0 assignment for kzalloc'ed structure soc: fsl: qe: fix sparse warnings for ucc_fast.c soc: fsl: qe: fix sparse warnings for qe_ic.c soc: fsl: qe: fix sparse warnings for ucc.c soc: fsl: qe: fix sparse warning for qe_common.c soc: fsl: qe: fix sparse warnings for qe.c soc: qcom: Fix QCOM_APR dependencies soc: qcom: pdr: Avoid uninitialized use of found in pdr_indication_cb soc: imx: drop COMPILE_TEST for IMX_SCU_SOC firmware: imx: add COMPILE_TEST for IMX_SCU driver soc: imx: gpc: fix power up sequencing soc: imx: increase build coverage for imx8m soc driver soc: qcom: apr: Add avs/audio tracking functionality dt-bindings: soc: qcom: apr: Add protection domain bindings soc: qcom: Introduce Protection Domain Restart helpers devicetree: bindings: firmware: add ipq806x to qcom_scm memory: tegra: Correct debugfs clk rate-range on Tegra124 memory: tegra: Correct debugfs clk rate-range on Tegra30 memory: tegra: Correct debugfs clk rate-range on Tegra20 ...
2020-04-03Merge tag 'pci-v5.7-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds3-26/+52
Pull pci updates from Bjorn Helgaas: "Enumeration: - Revert sysfs "rescan" renames that broke apps (Kelsey Skunberg) - Add more 32 GT/s link speed decoding and improve the implementation (Yicong Yang) Resource management: - Add support for sizing programmable host bridge apertures and fix a related alpha Nautilus regression (Ivan Kokshaysky) Interrupts: - Add boot interrupt quirk mechanism for Xeon chipsets and document boot interrupts (Sean V Kelley) PCIe native device hotplug: - When possible, disable in-band presence detect and use PDS (Alexandru Gagniuc) - Add DMI table for devices that don't use in-band presence detection but don't advertise that correctly (Stuart Hayes) - Fix hang when powering slots up/down via sysfs (Lukas Wunner) - Fix an MSI interrupt race (Stuart Hayes) Virtualization: - Add ACS quirks for Zhaoxin devices (Raymond Pang) Error handling: - Add Error Disconnect Recover (EDR) support so firmware can report devices disconnected via DPC and we can try to recover (Kuppuswamy Sathyanarayanan) Peer-to-peer DMA: - Add Intel Sky Lake-E Root Ports B, C, D to the whitelist (Andrew Maier) ASPM: - Reduce severity of common clock config message (Chris Packham) - Clear the correct bits when enabling L1 substates, so we don't go to the wrong state (Yicong Yang) Endpoint framework: - Replace EPF linkup ops with notifier call chain and improve locking (Kishon Vijay Abraham I) - Fix concurrent memory allocation in OB address region (Kishon Vijay Abraham I) - Move PF function number assignment to EPC core to support multiple function creation methods (Kishon Vijay Abraham I) - Fix issue with clearing configfs "start" entry (Kunihiko Hayashi) - Fix issue with endpoint MSI-X ignoring BAR Indicator and Table Offset (Kishon Vijay Abraham I) - Add support for testing DMA transfers (Kishon Vijay Abraham I) - Add support for testing > 10 endpoint devices (Kishon Vijay Abraham I) - Add support for tests to clear IRQ (Kishon Vijay Abraham I) - Add common DT schema for endpoint controllers (Kishon Vijay Abraham I) Amlogic Meson PCIe controller driver: - Add DT bindings for AXG PCIe PHY, shared MIPI/PCIe analog PHY (Remi Pommarel) - Add Amlogic AXG PCIe PHY, AXG MIPI/PCIe analog PHY drivers (Remi Pommarel) Cadence PCIe controller driver: - Add Root Complex/Endpoint DT schema for Cadence PCIe (Kishon Vijay Abraham I) Intel VMD host bridge driver: - Add two VMD Device IDs that require bus restriction mode (Sushma Kalakota) Mobiveil PCIe controller driver: - Refactor and modularize mobiveil driver (Hou Zhiqiang) - Add support for Mobiveil GPEX Gen4 host (Hou Zhiqiang) Microsoft Hyper-V host bridge driver: - Add support for Hyper-V PCI protocol version 1.3 and PCI_BUS_RELATIONS2 (Long Li) - Refactor to prepare for virtual PCI on non-x86 architectures (Boqun Feng) - Fix memory leak in hv_pci_probe()'s error path (Dexuan Cui) NVIDIA Tegra PCIe controller driver: - Use pci_parse_request_of_pci_ranges() (Rob Herring) - Add support for endpoint mode and related DT updates (Vidya Sagar) - Reduce -EPROBE_DEFER error message log level (Thierry Reding) Qualcomm PCIe controller driver: - Restrict class fixup to specific Qualcomm devices (Bjorn Andersson) Synopsys DesignWare PCIe controller driver: - Refactor core initialization code for endpoint mode (Vidya Sagar) - Fix endpoint MSI-X to use correct table address (Kishon Vijay Abraham I) TI DRA7xx PCIe controller driver: - Fix MSI IRQ handling (Vignesh Raghavendra) TI Keystone PCIe controller driver: - Allow AM654 endpoint to raise MSI-X interrupt (Kishon Vijay Abraham I) Miscellaneous: - Quirk ASMedia XHCI USB to avoid "PME# from D0" defect (Kai-Heng Feng) - Use ioremap(), not phys_to_virt(), for platform ROM to fix video ROM mapping with CONFIG_HIGHMEM (Mikel Rychliski)" * tag 'pci-v5.7-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (96 commits) misc: pci_endpoint_test: remove duplicate macro PCI_ENDPOINT_TEST_STATUS PCI: tegra: Print -EPROBE_DEFER error message at debug level misc: pci_endpoint_test: Use full pci-endpoint-test name in request_irq() misc: pci_endpoint_test: Fix to support > 10 pci-endpoint-test devices tools: PCI: Add 'e' to clear IRQ misc: pci_endpoint_test: Add ioctl to clear IRQ misc: pci_endpoint_test: Avoid using module parameter to determine irqtype PCI: keystone: Allow AM654 PCIe Endpoint to raise MSI-X interrupt PCI: dwc: Fix dw_pcie_ep_raise_msix_irq() to get correct MSI-X table address PCI: endpoint: Fix ->set_msix() to take BIR and offset as arguments misc: pci_endpoint_test: Add support to get DMA option from userspace tools: PCI: Add 'd' command line option to support DMA misc: pci_endpoint_test: Use streaming DMA APIs for buffer allocation PCI: endpoint: functions/pci-epf-test: Print throughput information PCI: endpoint: functions/pci-epf-test: Add DMA support to transfer data PCI: pciehp: Fix MSI interrupt race PCI: pciehp: Fix indefinite wait on sysfs requests PCI: endpoint: Fix clearing start entry in configfs PCI: tegra: Add support for PCIe endpoint mode in Tegra194 PCI: sysfs: Revert "rescan" file renames ...
2020-04-03drm/amdgpu: Fix oops when pp_funcs is unset in ACPI eventAaron Ma1-1/+2
On ARCTURUS and RENOIR, powerplay is not supported yet. When plug in or unplug power jack, ACPI event will issue. Then kernel NULL pointer BUG will be triggered. Check for NULL pointers before calling. Signed-off-by: Aaron Ma <aaron.ma@canonical.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2020-04-03drm/amdgpu: change SH MEM alignment mode for gfx10Likun Gao1-1/+1
Change SH_MEM_CONFIG Alignment mode to Automatic, as: 1)OGL fn_amd_compute_shader will failed with unaligned mode. 2)The default alignment mode was defined to automatic on gfx10 specification. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-03drm/amd/powerplay: avoid using pm_en before it is initializedTiecheng Zhou1-1/+2
hwmgr->pm_en is initialized at hwmgr_hw_init. during amdgpu_device_init, there is amdgpu_asic_reset that calls to pp_get_asic_baco_capability, while hwmgr->pm_en has not yet been initialized. so avoid using pm_en in pp_get_asic_baco_capability. Reviewed-by: Emily Deng <Emily.Deng@amd.com> Signed-off-by: Tiecheng Zhou <Tiecheng.Zhou@amd.com> Signed-off-by: Yintian Tao <yttao@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-03drm/amd/powerplay: implement the is_dpm_running()Prike Liang1-0/+12
As the pmfw hasn't exported the interface of SMU feature mask to APU SKU so just force on all the features to driver inquired interface at early initial stage. Signed-off-by: Prike Liang <Prike.Liang@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2020-04-03drm/amd/display: re-order asic declarationsShirish S1-2/+4
Fixes build error of: "use of undeclared identifier 'RENOIR_A0'" To fix the same, this patch re-orders the ASIC declarations accordingly. Fixes: 41ef3dcd86443fa ("drm/amd/display: Fix RV2 Variant Detection") Signed-off-by: Shirish S <shirish.s@amd.com> Reviewed-by: Zhan Liu <zhan.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-03drm/amdgpu/powerplay: using the FCLK DPM table to set the MCLKYuxian Dai2-1/+7
1.Using the FCLK DPM table to set the MCLK for DPM states consist of three entities: FCLK UCLK MEMCLK All these three clk change together, MEMCLK from FCLK, so use the fclk frequency. 2.we should show the current working clock freqency from clock table metric Signed-off-by: Yuxian Dai <Yuxian.Dai@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Kevin Wang <Kevin1.Wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2020-04-03drm/amd/display: fix the broken logic in dc_link.cYifan Zhang1-1/+2
Add missing braces. Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-03drm/amd/powerplay: avoid using pm_en before it is initializedTiecheng Zhou1-1/+2
hwmgr->pm_en is initialized at hwmgr_hw_init. during amdgpu_device_init, there is amdgpu_asic_reset that calls to pp_get_asic_baco_capability, while hwmgr->pm_en has not yet been initialized. so avoid using pm_en in pp_get_asic_baco_capability. Reviewed-by: Emily Deng <Emily.Deng@amd.com> Signed-off-by: Tiecheng Zhou <Tiecheng.Zhou@amd.com> Signed-off-by: Yintian Tao <yttao@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-03drm/amd/powerplay: implement the is_dpm_running()Prike Liang1-0/+12
As the pmfw hasn't exported the interface of SMU feature mask to APU SKU so just force on all the features to driver inquired interface at early initial stage. Signed-off-by: Prike Liang <Prike.Liang@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-03drm/amd/display: re-order asic declarationsShirish S1-2/+4
Fixes build error of: "use of undeclared identifier 'RENOIR_A0'" To fix the same, this patch re-orders the ASIC declarations accordingly. Fixes: 41ef3dcd86443fa ("drm/amd/display: Fix RV2 Variant Detection") Signed-off-by: Shirish S <shirish.s@amd.com> Reviewed-by: Zhan Liu <zhan.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-03drm/amdgpu/powerplay: using the FCLK DPM table to set the MCLKYuxian Dai2-1/+7
1.Using the FCLK DPM table to set the MCLK for DPM states consist of three entities: FCLK UCLK MEMCLK All these three clk change together, MEMCLK from FCLK, so use the fclk frequency. 2.we should show the current working clock freqency from clock table metric Signed-off-by: Yuxian Dai <Yuxian.Dai@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Kevin Wang <Kevin1.Wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-03amdgpu/drm: remove psp access on navi10 for sriovAlex Sierra1-9/+9
Navi ASICs don't require to access through PSP to osssys registers. This on SR-IOV configuration. Signed-off-by: Alex Sierra <alex.sierra@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-03drm/amd/display: Guard calls to hdcp_ta and dtm_taBhawanpreet Lakha3-163/+253
[Why] The buffer used when calling psp is a shared buffer. If we have multiple calls at the same time we can overwrite the buffer. [How] Add mutex to guard the shared buffer. Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-03drm/amd/display: remove mod_hdcp_hdcp2_get_link_encryption_status()Bhawanpreet Lakha2-31/+0
It is not being used, so remove it Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-03drm/dp_mst: Remove drm_dp_mst_topology_cbs.destroy_connectorLyude Paul1-13/+3
Now that we've removed the last user of this callback, get rid of it and drm_dp_destroy_connector(). Signed-off-by: Lyude Paul <lyude@redhat.com> Cc: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200331205740.135525-5-lyude@redhat.com Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
2020-04-03drm/amd/amdgpu_dm/mst: Stop printing extra messages in dm_dp_add_mst_connector()Lyude Paul1-5/+0
You can already trace the creation and destruction of connectors using DRM, and we definitely don't need to be printing info messages on connector hotplugs as well. So, get rid of these. Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200331205740.135525-4-lyude@redhat.com Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
2020-04-03drm/amd/amdgpu_dm/mst: Remove ->destroy_connector() callbackLyude Paul1-27/+12
Pankaj Bharadiya started cleaning up the MST connector callbacks a while ago, as I pointed out that they are the same across every driver and don't serve much purpose. There was one callback that was left over though from amdgpu, that we delayed removing due to not being completely sure as to whether or not it was needed. So, I've read through said callback and can confirm it's not at all needed. Pretty much all of the work that is done in dm_dp_destroy_mst_connector() can be done in dm_dp_mst_connector_destroy(). Additionally, I've removed some bits that didn't actually do anything: * Removed DRM_INFO message we were printing, this shouldn't be info level and there's more appropriate drm debugging flags that should be used instead * Removed amdgpu_dm_update_freesync_caps() - reading into this function, it doesn't actually do anything important and I'm not sure why it was ever being called here * Stop clearing aconnector->dc_sink - this also doesn't do anything * Stop clearing link settings in dc_link - this also doesn't do anything * Also, use shorter variable Signed-off-by: Lyude Paul <lyude@redhat.com> Cc: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200331205740.135525-3-lyude@redhat.com Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
2020-04-03drm/amd/amdgpu_dm/mst: Remove unneeded edid assignment when destroying connectorsLyude Paul1-1/+0
Doesn't do anything, noticed this while cleaning up some unrelated stuff. Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200331205740.135525-2-lyude@redhat.com Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
2020-04-03drm/i915/gt: Free request pool from virtual enginesChris Wilson3-4/+13
While extremely unlikely to be populated, we could capture a request on the virtual engine which we should free along with the virtual engine. Fixes: 43acd6516ca9 ("drm/i915: Keep a per-engine request pool") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200403203303.10903-1-chris@chris-wilson.co.uk
2020-04-03drm/i915/selftests: Wait until we start timeslicing after a submitChris Wilson1-1/+6
If we submit, we do not start timeslicing until we process the CS event that marks the start of the context running on HW. So in the selftest, be sure to wait until we have processed the pending events before asserting that timeslicing has begun. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200403190209.21818-1-chris@chris-wilson.co.uk
2020-04-03Merge tag 'spdx-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdxLinus Torvalds2-0/+2
Pull SPDX updates from Greg KH: "Here are three SPDX patches for 5.7-rc1. One fixes up the SPDX tag for a single driver, while the other two go through the tree and add SPDX tags for all of the .gitignore files as needed. Nothing too complex, but you will get a merge conflict with your current tree, that should be trivial to handle (one file modified by two things, one file deleted.) All three of these have been in linux-next for a while, with no reported issues other than the merge conflict" * tag 'spdx-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: ASoC: MT6660: make spdxcheck.py happy .gitignore: add SPDX License Identifier .gitignore: remove too obvious comments
2020-04-03drm/i915: Check current i915_vma.pin_count status first on unbindChris Wilson1-16/+9
Do an early rejection of a i915_vma_unbind() attempt if the i915_vma is currently pinned, without waiting to see if the inflight operations may unpin it. We see this problem with the shrinker trying to unbind the active vma from inside its bind worker: <6> [472.618968] Workqueue: events_unbound fence_work [i915] <4> [472.618970] Call Trace: <4> [472.618974] ? __schedule+0x2e5/0x810 <4> [472.618978] schedule+0x37/0xe0 <4> [472.618982] schedule_preempt_disabled+0xf/0x20 <4> [472.618984] __mutex_lock+0x281/0x9c0 <4> [472.618987] ? mark_held_locks+0x49/0x70 <4> [472.618989] ? _raw_spin_unlock_irqrestore+0x47/0x60 <4> [472.619038] ? i915_vma_unbind+0xae/0x110 [i915] <4> [472.619084] ? i915_vma_unbind+0xae/0x110 [i915] <4> [472.619122] i915_vma_unbind+0xae/0x110 [i915] <4> [472.619165] i915_gem_object_unbind+0x1dc/0x400 [i915] <4> [472.619208] i915_gem_shrink+0x328/0x660 [i915] <4> [472.619250] ? i915_gem_shrink_all+0x38/0x60 [i915] <4> [472.619282] i915_gem_shrink_all+0x38/0x60 [i915] <4> [472.619325] vm_alloc_page.constprop.25+0x1aa/0x240 [i915] <4> [472.619330] ? rcu_read_lock_sched_held+0x4d/0x80 <4> [472.619363] ? __alloc_pd+0xb/0x30 [i915] <4> [472.619366] ? module_assert_mutex_or_preempt+0xf/0x30 <4> [472.619368] ? __module_address+0x23/0xe0 <4> [472.619371] ? is_module_address+0x26/0x40 <4> [472.619374] ? static_obj+0x34/0x50 <4> [472.619376] ? lockdep_init_map+0x4d/0x1e0 <4> [472.619407] setup_page_dma+0xd/0x90 [i915] <4> [472.619437] alloc_pd+0x29/0x50 [i915] <4> [472.619470] __gen8_ppgtt_alloc+0x443/0x6b0 [i915] <4> [472.619503] gen8_ppgtt_alloc+0xd7/0x300 [i915] <4> [472.619535] ppgtt_bind_vma+0x2a/0xe0 [i915] <4> [472.619577] __vma_bind+0x26/0x40 [i915] <4> [472.619611] fence_work+0x1c/0x90 [i915] <4> [472.619617] process_one_work+0x26a/0x620 Fixes: 2850748ef876 ("drm/i915: Pull i915_vma_pin under the vm->mutex") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200403120150.17091-1-chris@chris-wilson.co.uk
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.