aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/gpu
AgeCommit message (Collapse)AuthorFilesLines
2022-07-05drm/amd/display: Switch to correct DTO on HDMIChris Park2-0/+6
[Why] For Pixel Rate control, when on HDMI, HDMI DTO should be selected instead of DP DTO. [How] Pass HDMI parameter for HDMI stream, and select correct DTO. Signed-off-by: Chris Park <chris.park@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-05drm/amd/display: Change DET policy for MPO casesAlvin Lee2-14/+22
For MPO we want to allocate less than maximum DET for MPO pipes because we need enogh buffer to move DET back to other pipes when removing an MPO plane. Also update regular DET allocation to use DET override (DCN32 has an internal policy which driver does not want to use) Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-05drm/amd/display: Use two pixel per container for k1/k2 divRodrigo Siqueira1-4/+4
Currently, we check if pixel_encoding is equal to PIXEL_ENCODING_YCBCR422 to get the k1/k2 div parameters. This commit changes this logic slightly by checking if two pixels per container are used. Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-05drm/amd/display: Apply ODM 2:1 policy for single display configurationSamson Tam10-7/+83
[Why] Most of the time, a single display uses the ODM combine. When using multi-display, we use ODM combine only if it is necessary. These cases are not flexible enough for us, and we can improve them to take advantage of our hardware. We want to have more control over the ODM policy. [How] This commit add a new debug flag named enable_single_display_2to1_odm_policy to control the ODM policy and another flag named enable_dp_dig_pixel_rate_div_policy to fine control the ODM combine. This is possible by adding a new "pipe.dest" parameter that can be set to ODM 2:1 combined if we use a single display. For dynamic ODM combine, when using DP-DIG, DCN applies K2=2 settings for ODM combine. Note that this feature affects the following registers: - timing.pix_clk_100khz -> DP_VID_M, DP_VID_N - requested_pix_clk_100hz -> DP_DTOn_PHASE - OTGn_PIXEL_RATE_DIVK2 - DP_PIXEL_PER_CYCLE_PROCESSING_MODE - DIG_FIFO_OUTPUT_PIXEL_MODE - DP_VID_N_MUL Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Samson Tam <Samson.Tam@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-05drm/amd/display: Add function to set pixels per cycleEric Bernstein8-5/+27
Add function to set pixels per cycle in DIG stream encoder Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Eric Bernstein <eric.bernstein@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-05drm/amd/display: Prepare for new interfacesMartin Leung8-28/+564
[WHY]: Lut pipeline will be hooked up differently in some asics need to add new interfaces and missing registers. [HOW]: Add missing registers and hook up programming from DPP for pre-blend lut. Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Martin Leung <Martin.Leung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-05drm/amd/display: Add SubVP required codeAlvin Lee20-67/+1185
This commit enables the SubVP feature. To achieve that, we need to: - Don't force p-state disallow on SubVP (can't block dummy p-state) - Send calculated watermark to DMCUB for SubVP - Adjust CAB mode message to PMFW - Add a proper locking sequence for SubVP - Various fixes to SubVP static analysis and determining SubVP config - Currently SubVP not supported with pipe split so merge all pipes before setting up SubVp Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Alan Liu <HaoPing.Liu@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-05drm/amd/display: Add missing registers for ACPRodrigo Siqueira5-0/+10
We are missing some ACP registers/mask value for some specific ASICs. This commit includes it to those ASICs that support it. Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-05drm/amdgpu: skip whole ras bad page framework on sriovStanley.Yang1-1/+1
It should not init whole ras bad page framework on sriov guest side due to it is handled on host side. Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-05drm/amdgpu: Only send ras feature for gfx blockStanley.Yang1-15/+19
GFX is the only IP block that RAS TA needs to program the hardware when receiving enable_feature command. Changed from V1: remove amdgpu_ras_need_send_ras_feature inline function, use GFX RAS block check directly. Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-05drm/amd/pm: update SMU 13.0.0 driver_if headerEvan Quan2-2/+3
And bump the version to 0x2A. Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-05drm/amdkfd: simplify vm_validate_pt_pd_bosLang Yu2-14/+8
We don't need to validate and map root PD specially here, it would be validated and mapped by amdgpu_vm_validate_pt_bos if it is evicted. The special case is when turning a GFX VM to a compute VM, if vm_update_mode changed, we should make sure root PD gets mapped. So just map root PD after updating vm->update_funcs in amdgpu_vm_make_compute whether the vm_update_mode changed or not. v3: - Add some comments suggested by Christian. v2: - Don't rename vm_validate_pt_pd_bos and make it public. Signed-off-by: Lang Yu <Lang.Yu@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-05drm/amd: Add debug mask for subviewport mclk switchAurabindo Pillai2-0/+4
[Why&How] Expose a new dc debug mask enum to force a subviewport memory clock switch to facilitate easy testing. Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-05drm: Remove linux/i2c.h from drm_crtc.hVille Syrjälä11-0/+11
drm_crtc.h has no need for linux/i2c.h, so don't include it. Avoids useless rebuilds of the entire universe when touching linux/i2c.h. Quite a few placs do currently depend on linux/i2c.h without actually including it directly. All of those need to be fixed up. v2: imx and mcde need linux/io.h for readl()/etc. Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220630195114.17407-5-ville.syrjala@linux.intel.com
2022-07-05drm: Remove linux/media-bus-format.h from drm_crtc.hVille Syrjälä42-0/+42
drm_crtc.h has no need for linux/media-bus-format.h, so don't include it. Avoids useless rebuilds of the entire universe when touching linux/media-bus-format.h. Quite a few placs do currently depend on linux/media-bus-format.h without actually including it directly. All of those need to be fixed up. v2: Deal with ingenic as well v3: Fix up mxsfb and remaining parts of imx Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220630195114.17407-4-ville.syrjala@linux.intel.com
2022-07-05drm: Remove linux/fb.h from drm_crtc.hVille Syrjälä24-0/+25
drm_crtc.h has no need for linux/fb.h, so don't include it. Avoids useless rebuilds of the entire universe when touching linux/fb.h. Quite a few placs do currently depend on linux/fb.h or other headers pulled in by it without actually including any of it directly. All of those need to be fixed up. v2: Split the vmwgfx change out Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220630195114.17407-3-ville.syrjala@linux.intel.com
2022-07-05drm/vmwgfx: Stop using 'TRUE'Ville Syrjälä1-1/+1
Stop using the 'TRUE' define. This ultimately gets defined by acpi/actypes.h that gets included here via a convoluted chain of other headers. drm_crtc.h is part of that chain, and I'm trying to eliminate all unnecessary includes from it to avoid pointless rebuilds. v2: Split out from the bigger patch Cc: Zack Rusin <zackr@vmware.com> Cc: VMware Graphics Reviewers <linux-graphics-maintainer@vmware.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220630195114.17407-2-ville.syrjala@linux.intel.com Reviewed-by: Zack Rusin <zackr@vmware.com<mailto:zackr@vmware.com>>
2022-07-05Merge branches 'msm-next-lumag-core', 'msm-next-lumag-dpu', 'msm-next-lumag-dp', 'msm-next-lumag-dsi', 'msm-next-lumag-hdmi', 'msm-next-lumag-mdp5' and 'msm-next-lumag-mdp4' into msm-next-lumagDmitry Baryshkov53-1022/+771
Changes in this merge: Core: - client utilization via fdinfo support - fix fence rollover issue DPU: - constification of HW catalog - support for using encoder as CRC source - WB support on sc7180 - WB resolution fixes - enable DSPP support for sc7280 DP: - dropped custom bulk clock implementation - made dp_bridge_mode_valid() return MODE_CLOCK_HIGH where applicable - fix link retraining on resolution change MDP5: - MSM8953 perf data HDMI: - YAML'ification of schema - dropped obsolete GPIO support - misc cleanups Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-05drm/msm: Fix fence rollover issueRob Clark1-1/+10
And while we are at it, let's start the fence counter close to the rollover point so that if issues slip in, they are more obvious. Signed-off-by: Rob Clark <robdclark@chromium.org> Fixes: fde5de6cb461 ("drm/msm: move fence code to it's own file") Fixes: 5f3aee4ceb5b ("drm/msm: Handle fence rollover") Patchwork: https://patchwork.freedesktop.org/patch/489619/ Link: https://lore.kernel.org/r/20220615162435.3011793-1-robdclark@gmail.com [DB: fixed the conflict while applying the patch] Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-05drm/msm: Use div64_ul instead of do_divWan Jiabing1-1/+1
Fix following coccicheck warning: drivers/gpu/drm/msm/msm_gpu_devfreq.c:72:1-7: WARNING: do_div() does a 64-by-32 division, please consider using div64_ul instead. Use div64_ul instead of do_div to avoid a possible truncation. Signed-off-by: Wan Jiabing <wanjiabing@vivo.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Patchwork: https://patchwork.freedesktop.org/patch/483499/ Link: https://lore.kernel.org/r/20220426132126.686447-1-wanjiabing@vivo.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-05drm/msm: Expose client engine utilization via fdinfoRob Clark3-3/+56
Similar to AMD commit 874442541133 ("drm/amdgpu: Add show_fdinfo() interface"), using the infrastructure added in previous patches, we add basic client info and GPU engine utilisation for msm. Example output: # cat /proc/`pgrep glmark2`/fdinfo/6 pos: 0 flags: 02400002 mnt_id: 21 ino: 162 drm-driver: msm drm-client-id: 7 drm-engine-gpu: 1734371319 ns drm-cycles-gpu: 1153645024 drm-maxfreq-gpu: 800000000 Hz See also: https://patchwork.freedesktop.org/patch/468505/ v2: Add dev-maxfreq-$engine and update drm-usage-stats.rst v3: spelling and compiler warning Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Patchwork: https://patchwork.freedesktop.org/patch/488906/ Link: https://lore.kernel.org/r/20220609174213.2265938-2-robdclark@gmail.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-05drm/msm: Make msm_gem_free_object() staticRob Clark2-2/+1
Misc small cleanup I noticed. Not called from another object file since commit 3c9edd9c85f5 ("drm/msm: Introduce GEM object funcs") Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/489362/ Link: https://lore.kernel.org/r/20220613204910.2651747-1-robdclark@gmail.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm: bridge: sii8620: fix possible off-by-oneHangyu Hua1-2/+2
The next call to sii8620_burst_get_tx_buf will result in off-by-one When ctx->burst.tx_count + size == ARRAY_SIZE(ctx->burst.tx_buf). The same thing happens in sii8620_burst_get_rx_buf. This patch also change tx_count and tx_buf to rx_count and rx_buf in sii8620_burst_get_rx_buf. It is unreasonable to check tx_buf's size and use rx_buf. Fixes: e19e9c692f81 ("drm/bridge/sii8620: add support for burst eMSC transmissions") Signed-off-by: Hangyu Hua <hbh25y@gmail.com> Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220518065856.18936-1-hbh25y@gmail.com
2022-07-04drm/msm/disp/dpu1: add dspp support for sc7280Kalyan Thota1-1/+3
Add destination side post processing hw block support in sc7280. This hwblock enablement is necessary to support color features like CT Matix (Ex: Night Light feature) Signed-off-by: Kalyan Thota <quic_kalyant@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/490382/ Link: https://lore.kernel.org/r/1655802387-15275-1-git-send-email-quic_kalyant@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/mdp5: Add perf data for MDP v1.16Vladimir Lypak1-0/+5
Add the perf data for the mdp found in msm8953. Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com> Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/489153/ Link: https://lore.kernel.org/r/20220610225304.267508-1-luca@z3ntu.xyz Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/mdp4: get rid of struct mdp4_platform_configDmitry Baryshkov2-20/+6
Struct mdp4_platform_config is a relict from the DT-conversion time. Move the max_clk field to the mdp4_kms_init(), the place where it is used and drop the struct mdp4_platform_config and the mdp4_get_config() function. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/485050/ Link: https://lore.kernel.org/r/20220505135008.1351533-3-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/mdp4: move iommu_domain_alloc() call close to its usageDmitry Baryshkov2-5/+4
Move iommu_domain_alloc() in front of adress space/IOMMU initialization. This allows us to drop it from struct mdp4_cfg_platform which remained from the pre-DT days. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/485049/ Link: https://lore.kernel.org/r/20220505135008.1351533-2-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/hdmi: support attaching the "next" bridgeDmitry Baryshkov2-0/+16
There might be a chain of bridges attached to the HDMI node (including but not limited to the display-connector bridge). Add support for attaching them right to the HDMI bridge chain. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/489709/ Link: https://lore.kernel.org/r/20220616085057.432353-1-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/hdmi: drop empty bridge callbacksDmitry Baryshkov1-10/+0
Drop empty callbacks msm_hdmi_bridge_enable() and msm_hdmi_bridge_disable(). Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/489707/ Link: https://lore.kernel.org/r/20220616085054.432317-1-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/hdmi-phy: populate 8x60 HDMI PHY requirementsDmitry Baryshkov1-0/+12
Declare that 8x60 HDMI PHY uses the core-vdda regulator and slave_iface clock (this is the same config as is used by the 8960). Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/488863/ Link: https://lore.kernel.org/r/20220609122350.3157529-13-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/hdmi: reuse MSM8960's config for MSM8660Dmitry Baryshkov1-3/+1
MSM8660 requires the same set of clocks and regulators as MSM8960. Reuse MSM8960's config for the MSM8660 (8x60). Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/488864/ Link: https://lore.kernel.org/r/20220609122350.3157529-12-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/hdmi: merge platform config for 8974/8084/8994/8996Dmitry Baryshkov1-24/+3
Since there is no more difference between the HDMI platform data between MSM8974/APQ8084/MSM8994/MSM8996, merge these configs into a single entry. Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/488868/ Link: https://lore.kernel.org/r/20220609122350.3157529-11-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/hdmi: drop hpd_regs usage on 8x74/8084Dmitry Baryshkov1-5/+0
The MSM HDMI driver has support for hpd_regs on 8x74/8084: supply regulators that are to be enabled for HPD to work. Currently these regulators contain the hpd_gdsc, which was replaced by the power-domains support and hpd-5v/hpd-5v-en, which are not used by the chip itself. They power up the ESD bridge. However it is a separate device which should be represented separately in the device tree. None of upstreamed devices support these properties. Thus drop support for them from the HDMI driver. Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/488860/ Link: https://lore.kernel.org/r/20220609122350.3157529-10-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/hdmi: drop empty 'none' regulator listsDmitry Baryshkov1-5/+0
Several platform configs use empty 'none' regulator arrays. They are not necessary, as the code will use corresponding _cnt field and skip the array completely. Drop them now. Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/488861/ Link: https://lore.kernel.org/r/20220609122350.3157529-9-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/hdmi: enable core-vcc/core-vdda-supply for 8996 platformDmitry Baryshkov1-1/+1
DB820c makes use of core-vcc-supply and core-vdda-supply, however the driver code doesn't support these regulators. Enable them for HDMI on 8996 platform. Fixes: 0afbe59edd3f ("drm/msm/hdmi: Add basic HDMI support for msm8996") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/488857/ Link: https://lore.kernel.org/r/20220609122350.3157529-8-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/hdmi: drop unused GPIO supportDmitry Baryshkov3-120/+21
The HDMI driver has code to configure extra GPIOs, which predates pinctrl support. Nowadays all platforms should use pinctrl instead. Neither of upstreamed Qualcomm platforms uses these properties, so it's safe to drop them. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/488858/ Link: https://lore.kernel.org/r/20220609122350.3157529-7-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/hdmi: drop the hdmi-mux supportDmitry Baryshkov1-1/+1
With the last (and only) in-kernel user of hdmi-mux regulator, drop it from the HDMI driver. Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/488855/ Link: https://lore.kernel.org/r/20220609122350.3157529-6-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/dp: use ARRAY_SIZE for calculating num_descsDmitry Baryshkov1-19/+27
If for some reason the msm_dp_config::descs array starts from non-zero index or contains the hole, setting the msm_dp_config::num_descs might be not that obvious and error-prone. Use ARRAY_SIZE to set this field rather than encoding the value manually. Reported-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/491399/ Link: https://lore.kernel.org/r/20220627165413.657142-1-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/dsi: Use single function for resetVladimir Lypak1-27/+21
There is currently two function for performing reset: dsi_sw_reset and dsi_sw_reset_restore. Only difference between those is that latter one assumes that DSI controller is enabled. In contrary former one assumes that controller is disabled and executed during power-on. However this assumtion is not true mobile devices which have boot splash set up by boot-loader. This patch removes dsi_sw_reset_restore and makes dsi_sw_reset disable DSI controller during reset sequence if it's enabled. Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com> Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/489152/ Link: https://lore.kernel.org/r/20220610220259.220622-1-luca@z3ntu.xyz [DB: fixed the typo in the commit message] Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/hdmi: fill the pwr_regs bulk regulatorsDmitry Baryshkov1-0/+3
Conversion to use bulk regulator API omitted filling the pwr_regs with proper regulator IDs. This was left unnoticed, since none of my testing platforms has used the pwr_regs. Fix this by propagating regulator ids properly. Fixes: 31b3b1f5e352 ("drm/msm/hdmi: use bulk regulator API") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/488847/ Link: https://lore.kernel.org/r/20220609113148.3149194-1-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/dp: Remove encoder pointer from struct msm_dpStephen Boyd4-9/+6
We don't need to stash the encoder here. Instead we can simply pass it around as an argument. Cc: Kuogee Hsieh <quic_khsieh@quicinc.com> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/491187/ Link: https://lore.kernel.org/r/20220625002811.3225344-1-swboyd@chromium.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/dp: make dp_bridge_mode_valid() more preciseDmitry Baryshkov1-1/+1
Make dp_connector_mode_valid() return precise MODE_CLOCK_HIGH rather than generic MODE_BAD in case the mode clock is higher than DP_MAX_PIXEL_CLK_KHZ (675 MHz). Reviewed-by: Kuogee Hsieh<quic_khsieh@quicinc.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/489554/ Link: https://lore.kernel.org/r/20220615115920.6768-1-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/dpu: simplify and unify dpu_encoder_get_intf and dpu_encoder_get_wbDmitry Baryshkov1-8/+8
Remove extra nestting level from the dpu_encoder_get_intf(), replacing it with the explicit return in case the INTF_WB was passed to the function. While we are at it, also change dpu_encoder_get_wb() to also use explicit return rather than the goto. Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/491189/ Link: https://lore.kernel.org/r/20220625003028.383259-1-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/dpu: Add interface support for CRC debugfsJessica Zhang4-1/+134
Add support for writing CRC values for the interface block to the debugfs by calling the necessary MISR setup/collect methods. Changes since V1: - Set values_cnt to only include phys with backing hw_intf - Loop over all drm_encs connected to crtc Changes since V2: - Remove vblank.h inclusion - Change `pos + i` to `pos + entries` - Initialize values_cnt to 0 for encoder - Change DPU_CRTC_CRC_SOURCE_INTF to DPU_CRTC_CRC_SOURCE_ENCODER (and "intf" to "enc") - Change dpu_encoder_get_num_phys to dpu_encoder_get_num_hw_intfs - Add checks for setup_misr and collect_misr in dpu_encoder_get_num_hw_intfs Changes since V3: - Remove extra whitespace - Change "enc" to "encoder" - Move crcs array to dpu_crtc_get_encoder_crc - Rename dpu_encoder_get_num_hw_intfs to dpu_encoder_get_crc_values_cnt Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/490736/ Link: https://lore.kernel.org/r/20220622171835.7558-5-quic_jesszhan@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/dp: rewrite dss_module_power to use bulk clock functionsDmitry Baryshkov7-174/+34
In order to simplify DP code, drop hand-coded loops over clock arrays, replacing them with clk_bulk_* functions. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/474717/ Link: https://lore.kernel.org/r/20220217055529.499829-6-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/dpu: Add MISR register support for interfaceJessica Zhang2-2/+25
Add support for setting MISR registers within the interface Changes since V1: - Replaced dpu_hw_intf collect_misr and setup_misr implementations with calls to dpu_hw_utils helper methods Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/490730/ Link: https://lore.kernel.org/r/20220622171835.7558-4-quic_jesszhan@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/dp: inline dp_power_clk_set_rate()Dmitry Baryshkov1-17/+5
Inline the dp_power_clk_set_rate() function, replacing it with the call to msm_dss_enable_clk(). Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/474719/ Link: https://lore.kernel.org/r/20220217055529.499829-5-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/dpu: Move MISR methods to dpu_hw_utilJessica Zhang3-40/+67
Move layer mixer specific MISR methods to generalized helper methods. This will make it easier to add CRC support for other blocks in the future. Changes since V2: - Reordered parameters so that offsets are after hw_blk_reg_map - Fixed mismatched whitespace in bitmask definitions Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/490732/ Link: https://lore.kernel.org/r/20220622171835.7558-3-quic_jesszhan@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/dp: set stream_pixel rate directlyDmitry Baryshkov5-60/+1
The only clock for which we set the rate is the "stream_pixel". Rather than storing the rate and then setting it by looping over all the clocks, set the clock rate directly. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/474714/ Link: https://lore.kernel.org/r/20220217055529.499829-4-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/dp: "inline" dp_ctrl_set_clock_rate("ctrl_link")Dmitry Baryshkov2-34/+6
"ctrl_link" is the clock from DP_CTRL_PM module. The result of setting the rate for it would be a call to dev_pm_opp_set_rate(). Instead of saving the rate inside struct dss_module_power, call the devm_pm_opp_set_rate() directly. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/474712/ Link: https://lore.kernel.org/r/20220217055529.499829-3-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.