aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/gpu
AgeCommit message (Collapse)AuthorFilesLines
2019-10-03drm/amd/display: 3.2.51Aric Cyr1-1/+1
Signed-off-by: Aric Cyr <aric.cyr@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-03drm/amd/display: enable single dp seamless bootMartin Leung4-46/+70
[why] seamless boot didn't work for non edp's before [how] removed edp-specific code, made dp read uefi-set link settings. Also fixed a hubbub code line to be consistent with usage of function. Signed-off-by: Martin Leung <martin.leung@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-03drm/amd/display: update odm mode validation to be in line with policyDmytro Laktyushkin2-22/+9
Previously 8k30 worked with dsc and odm combine due to a workaround that ran the formula a second time with dsc support enable should dsc validation fail. This worked when clocks were low enough for formula to enable odm to lower voltage, however now broke due to increased clocks. This change updates the ODM combine policy within the formula to properly reflect our current policy within DC, only enabling ODM when we have to, as well as adding a check for viewport width when dsc is enabled. As a side effect the redundant call to dml when odm is required is now unnecessary. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-03drm/amd/display: Optimize clocks on clock changeWesley Chalmers2-4/+7
[WHY] Presently, there is no way for clocks to be lowered, only raised. [HOW] Compare clock status against previous known clock status, and optimize if different. This requires re-ordering the layout of the dc_clocks structure, as the current ordering allows identical clock states to appear different. Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-03drm/amd/display: Set number of pipes to 1 if the second pipe was disabledNikola Cornij1-0/+4
[why] Some ODM-related register settings are inconsistently updated by VBIOS, causing the state in DC to be invalid, which would then end up crashing in certain use-cases (such as disable/enable device). [how] Check the enabled status of the second pipe when determining the number of OPTC sources. If the second pipe is disabled, set the number of sources to 1 regardless of other settings (that may not be updated correctly). Signed-off-by: Nikola Cornij <nikola.cornij@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-03drm/amd/display: set minimum abm backlight levelAnthony Koo3-33/+48
[Why] A lot of the time, the backlight characteristic curve maps min backlight to a non-zero value. But there are cases where we want the curve to intersect at 0. In this scenario even if OS never asks to set 0% backlight, the ABM reduction can result in backlight being lowered close to 0. This particularly can cause problems in some LED drivers, and in general just looks like backlight is completely off. [How] Add default cap to disallow backlight from dropping below 1% even after ABM reduction is applied. Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-03drm/amd/display: Revert fixup DPP programming sequenceWesley Chalmers10-121/+48
[WHY] This change was made because DTO programming was double-buffered, which is itself an issue. After deactivating the DTO double buffer, this change becomes unnecessary. Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-03drm/amd/display: Do not double-buffer DTO adjustmentsWesley Chalmers1-26/+0
[WHY] When changing DPP global ref clock, DTO adjustments must take effect immediately, or else underflow may occur. It appears the original decision to double-buffer DTO adjustments was made to prevent underflows that occur when raising DPP ref clock (which is not double-buffered), but that same decision causes similar issues when lowering DPP global ref clock. The better solution is to order the adjustments according to whether clocks are being raised or lowered. Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-03Revert "drm/sun4i: dsi: Change the start delay calculation"Icenowy Zheng1-2/+1
This reverts commit da676c6aa6413d59ab0a80c97bbc273025e640b2. The original commit adds a start parameter to the calculation of the start delay according to some old BSP versions from Allwinner. However, there're two ways to add this delay -- add it in DSI controller or add it in the TCON. Add it in both controllers won't work. The code before this commit is picked from new versions of BSP kernel, which has a comment for the 1 that says "put start_delay to tcon". By checking the sun4i_tcon0_mode_set_cpu() in sun4i_tcon driver, it has already added this delay, so we shouldn't repeat to add the delay in DSI controller, otherwise the timing won't match. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191001080253.6135-2-icenowy@aosc.io
2019-10-03drm/sun4i: dsi: Fix TCON DRQ set bitsJagan Teki1-2/+2
The LCD timing definitions between Linux DRM vs Allwinner are different, below diagram shows this clear differences. Active Front Sync Back Region Porch Porch <-----------------------><----------------><--------------><--------------> //////////////////////| ////////////////////// | ////////////////////// |.................. ................ ________________ <----- [hv]display -----> <------------- [hv]sync_start ------------> <--------------------- [hv]sync_end ----------------------> <-------------------------------- [hv]total ------------------------------> <----- lcd_[xy] --------> <- lcd_[hv]spw -> <---------- lcd_[hv]bp ---------> <-------------------------------- lcd_[hv]t ------------------------------> The DSI driver misinterpreted the hbp term from the BSP code to refer only to the backporch, when in fact it was backporch + sync. Thus the driver incorrectly used the horizontal front porch plus sync in its calculation of the DRQ set bit value, when it should not have included the sync timing. Including additional sync timings leads to flip_done timed out as: WARNING: CPU: 0 PID: 31 at drivers/gpu/drm/drm_atomic_helper.c:1429 drm_atomic_helper_wait_for_vblanks.part.1+0x298/0x2a0 [CRTC:46:crtc-0] vblank wait timed out Modules linked in: CPU: 0 PID: 31 Comm: kworker/0:1 Not tainted 5.1.0-next-20190514-00026-g01f0c75b902d-dirty #13 Hardware name: Allwinner sun8i Family Workqueue: events deferred_probe_work_func [<c010ed54>] (unwind_backtrace) from [<c010b76c>] (show_stack+0x10/0x14) [<c010b76c>] (show_stack) from [<c0688c70>] (dump_stack+0x84/0x98) [<c0688c70>] (dump_stack) from [<c011d9e4>] (__warn+0xfc/0x114) [<c011d9e4>] (__warn) from [<c011da40>] (warn_slowpath_fmt+0x44/0x68) [<c011da40>] (warn_slowpath_fmt) from [<c040cd50>] (drm_atomic_helper_wait_for_vblanks.part.1+0x298/0x2a0) [<c040cd50>] (drm_atomic_helper_wait_for_vblanks.part.1) from [<c040e694>] (drm_atomic_helper_commit_tail_rpm+0x5c/0x6c) [<c040e694>] (drm_atomic_helper_commit_tail_rpm) from [<c040e4dc>] (commit_tail+0x40/0x6c) [<c040e4dc>] (commit_tail) from [<c040e5cc>] (drm_atomic_helper_commit+0xbc/0x128) [<c040e5cc>] (drm_atomic_helper_commit) from [<c0411b64>] (restore_fbdev_mode_atomic+0x1cc/0x1dc) [<c0411b64>] (restore_fbdev_mode_atomic) from [<c04156f8>] (drm_fb_helper_restore_fbdev_mode_unlocked+0x54/0xa0) [<c04156f8>] (drm_fb_helper_restore_fbdev_mode_unlocked) from [<c0415774>] (drm_fb_helper_set_par+0x30/0x54) [<c0415774>] (drm_fb_helper_set_par) from [<c03ad450>] (fbcon_init+0x560/0x5ac) [<c03ad450>] (fbcon_init) from [<c03eb8a0>] (visual_init+0xbc/0x104) [<c03eb8a0>] (visual_init) from [<c03ed1b8>] (do_bind_con_driver+0x1b0/0x390) [<c03ed1b8>] (do_bind_con_driver) from [<c03ed780>] (do_take_over_console+0x13c/0x1c4) [<c03ed780>] (do_take_over_console) from [<c03ad800>] (do_fbcon_takeover+0x74/0xcc) [<c03ad800>] (do_fbcon_takeover) from [<c013c9c8>] (notifier_call_chain+0x44/0x84) [<c013c9c8>] (notifier_call_chain) from [<c013cd20>] (__blocking_notifier_call_chain+0x48/0x60) [<c013cd20>] (__blocking_notifier_call_chain) from [<c013cd50>] (blocking_notifier_call_chain+0x18/0x20) [<c013cd50>] (blocking_notifier_call_chain) from [<c03a6e44>] (register_framebuffer+0x1e0/0x2f8) [<c03a6e44>] (register_framebuffer) from [<c04153c0>] (__drm_fb_helper_initial_config_and_unlock+0x2fc/0x50c) [<c04153c0>] (__drm_fb_helper_initial_config_and_unlock) from [<c04158c8>] (drm_fbdev_client_hotplug+0xe8/0x1b8) [<c04158c8>] (drm_fbdev_client_hotplug) from [<c0415a20>] (drm_fbdev_generic_setup+0x88/0x118) [<c0415a20>] (drm_fbdev_generic_setup) from [<c043f060>] (sun4i_drv_bind+0x128/0x160) [<c043f060>] (sun4i_drv_bind) from [<c044b598>] (try_to_bring_up_master+0x164/0x1a0) [<c044b598>] (try_to_bring_up_master) from [<c044b668>] (__component_add+0x94/0x140) [<c044b668>] (__component_add) from [<c0445e1c>] (sun6i_dsi_probe+0x144/0x234) [<c0445e1c>] (sun6i_dsi_probe) from [<c0452ef4>] (platform_drv_probe+0x48/0x9c) [<c0452ef4>] (platform_drv_probe) from [<c04512cc>] (really_probe+0x1dc/0x2c8) [<c04512cc>] (really_probe) from [<c0451518>] (driver_probe_device+0x60/0x160) [<c0451518>] (driver_probe_device) from [<c044f7a4>] (bus_for_each_drv+0x74/0xb8) [<c044f7a4>] (bus_for_each_drv) from [<c045107c>] (__device_attach+0xd0/0x13c) [<c045107c>] (__device_attach) from [<c0450474>] (bus_probe_device+0x84/0x8c) [<c0450474>] (bus_probe_device) from [<c0450900>] (deferred_probe_work_func+0x64/0x90) [<c0450900>] (deferred_probe_work_func) from [<c0135970>] (process_one_work+0x204/0x420) [<c0135970>] (process_one_work) from [<c013690c>] (worker_thread+0x274/0x5a0) [<c013690c>] (worker_thread) from [<c013b3d8>] (kthread+0x11c/0x14c) [<c013b3d8>] (kthread) from [<c01010e8>] (ret_from_fork+0x14/0x2c) Exception stack(0xde539fb0 to 0xde539ff8) 9fa0: 00000000 00000000 00000000 00000000 9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 9fe0: 00000000 00000000 00000000 00000000 00000013 00000000 ---[ end trace b57eb1e5c64c6b8b ]--- random: fast init done [drm:drm_atomic_helper_wait_for_dependencies] *ERROR* [CRTC:46:crtc-0] flip_done timed out [drm:drm_atomic_helper_wait_for_dependencies] *ERROR* [CONNECTOR:48:DSI-1] flip_done timed out [drm:drm_atomic_helper_wait_for_dependencies] *ERROR* [PLANE:30:plane-0] flip_done timed out With the terms(as described in above diagram) fixed, the panel displays correctly without any timeouts. Tested-by: Merlijn Wajer <merlijn@wizzup.org> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191003064527.15128-2-jagan@amarulasolutions.com
2019-10-03drm/sun4i: sun6i_mipi_dsi: Add VCC-DSI regulator supportJagan Teki2-0/+16
Allwinner MIPI DSI controllers are supplied with SoC DSI power rails via VCC-DSI pin. Add support for this supply pin by adding voltage regulator handling code to MIPI DSI driver. Tested-by: Merlijn Wajer <merlijn@wizzup.org> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191003064527.15128-6-jagan@amarulasolutions.com
2019-10-03drm/i915: use DRM_DEBUG_KMS() instead of drm_dbg(DRM_UT_KMS, ...)Jani Nikula1-4/+4
Unify on current common usage to allow repurposing drm_dbg() later. Fix newlines while at it. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191002145405.27848-2-jani.nikula@intel.com
2019-10-03drm/i915: use DRM_ERROR() instead of drm_err()Jani Nikula1-4/+4
Unify on current common usage to allow repurposing drm_err() later. Fix newlines while at it. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191002145405.27848-1-jani.nikula@intel.com
2019-10-03Merge drm-misc-next-fixes-2019-10-02 into drm-misc-fixesMaxime Ripard1-0/+1
One tilcdc fix was left out in drm-misc-next-fixes and didn't make it during the merge window. Let's bring it into drm-misc-fixes. Signed-off-by: Maxime Ripard <mripard@kernel.org>
2019-10-03Merge drm/drm-fixes into drm-misc-fixesMaxime Ripard1497-36906/+259668
We haven't backmerged for a while, let's start the -rc period by pulling rc1. Signed-off-by: Maxime Ripard <mripard@kernel.org>
2019-10-03drm/omap: fix max fclk divider for omap36xxTomi Valkeinen1-1/+1
The OMAP36xx and AM/DM37x TRMs say that the maximum divider for DSS fclk (in CM_CLKSEL_DSS) is 32. Experimentation shows that this is not correct, and using divider of 32 breaks DSS with a flood or underflows and sync losts. Dividers up to 31 seem to work fine. There is another patch to the DT files to limit the divider correctly, but as the DSS driver also needs to know the maximum divider to be able to iteratively find good rates, we also need to do the fix in the DSS driver. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Adam Ford <aford173@gmail.com> Cc: stable@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20191002122542.8449-1-tomi.valkeinen@ti.com Tested-by: Adam Ford <aford173@gmail.com> Reviewed-by: Jyri Sarha <jsarha@ti.com>
2019-10-02drm/i915: Fix g4x sprite scaling stride check with GTT remappingVille Syrjälä1-2/+3
I forgot to update the g4x sprite scaling stride check when GTT remapping was introduced. The stride of the original framebuffer is irrelevant when remapping is used and instead we want to check the stride of the remapped view. Also drop the duplicate width_bytes check. We already check that a few lines earlier. Fixes: df79cf441910 ("drm/i915: Store the final plane stride in plane_state") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190930183045.662-1-ville.syrjala@linux.intel.com Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (cherry picked from commit 006e570128f413759b9df64b51bae79903679c9b) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2019-10-02drm/i915/dp: Fix dsc bpp calculations, v5.Maarten Lankhorst5-99/+107
There was a integer wraparound when mode_clock became too high, and we didn't correct for the FEC overhead factor when dividing, with the calculations breaking at HBR3. As a result our calculated bpp was way too high, and the link width limitation never came into effect. Print out the resulting bpp calcululations as a sanity check, just in case we ever have to debug it later on again. We also used the wrong factor for FEC. While bspec mentions 2.4%, all the calculations use 1/0.972261, and the same ratio should be applied to data M/N as well, so use it there when FEC is enabled. This fixes the FIFO underrun we are seeing with FEC enabled. Changes since v2: - Handle fec_enable in intel_link_compute_m_n, so only data M/N is adjusted. (Ville) - Fix initial hardware readout for FEC. (Ville) Changes since v3: - Remove bogus fec_to_mode_clock. (Ville) Changes since v4: - Use the correct register for icl. (Ville) - Split hw readout to a separate patch. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Fixes: d9218c8f6cf4 ("drm/i915/dp: Add helpers for Compressed BPP and Slice Count for DSC") Cc: <stable@vger.kernel.org> # v5.0+ Cc: Manasi Navare <manasi.d.navare@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190925082110.17439-1-maarten.lankhorst@linux.intel.com Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> (cherry picked from commit ed06efb801bd291e935238d3fba46fa03d098f0e) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2019-10-03drm/i915/selftests: Exercise potential false lite-restoreChris Wilson2-4/+194
If execlists's lite-restore is based on the common GEM context tag rather than the per-intel_context LRCA, then a context switch between two intel_contexts on the same engine derived from the same GEM context will perform a lite-restore instead of a full context switch. We can exploit this by poisoning the ringbuffer of the first context and trying to trick a simple RING_TAIL update (i.e. lite-restore) v2: Also check what happens if preempt ce[0] with ce[1] (both instances on the same engine from the same parent context) [Tvrtko] Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191002183459.26614-1-chris@chris-wilson.co.uk
2019-10-02drm/i915/mg: Use tc_port instead of port parameter to MG registersJosé Roberto de Souza2-83/+81
All the MG registers is based on the tc_port not port, so MG_PHY_PORT_LN() was subtracting port and PORT_C what is very fragile. So replacing port to tc_port in all MG register macros and users like we have for DKL. Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Imre Deak <imre.deak@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191001193729.123736-1-jose.souza@intel.com
2019-10-02drm/amd/display: fix dcn21 Makefile for clangArnd Bergmann1-1/+11
Just like all the other variants, this one passes invalid compile-time options with clang after the new code got merged: clang: error: unknown argument: '-mpreferred-stack-boundary=4' scripts/Makefile.build:265: recipe for target 'drivers/gpu/drm/amd/amdgpu/../display/dc/dcn21/dcn21_resource.o' failed Use the same variant that we have for dcn20 to fix compilation. Fixes: eced51f9babb ("drm/amd/display: Add hubp block for Renoir (v2)") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-02drm/amd/display: hide an unused variableArnd Bergmann1-0/+2
Without CONFIG_DEBUG_FS, we get a warning for an unused variable: drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:6020:33: error: unused variable 'source' [-Werror,-Wunused-variable] Hide the variable in an #ifdef like its only users. Fixes: 14b2584636c6 ("drm/amd/display: add functionality to grab DPRX CRC entries.") Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-02drm/amdgpu: display_mode_vba_21: remove uint typedefArnd Bergmann1-8/+5
The type definition for 'uint' clashes with the generic kernel headers: drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn21/display_mode_vba_21.c:43:22: error: redefinition of typedef 'uint' is a C11 feature [-Werror,-Wtypedef-redefinition] include/linux/types.h:92:23: note: previous definition is here Just remove this type and use plain 'unsigned int' consistently, as it is already use almost everywhere in this file. Fixes: b04641a3f4c5 ("drm/amd/display: Add Renoir DML") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-02drm/amdgpu: hide another #warningArnd Bergmann1-2/+0
An earlier patch of mine disabled some #warning statements that get in the way of build testing, but then another instance was added around the same time. Remove that as well. Fixes: b5203d16aef4 ("drm/amd/amdgpu: hide #warning for missing DC config") Fixes: e1c14c43395c ("drm/amdgpu: Enable DC on Renoir") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-02drm/amdgpu: make pmu support optional, againArnd Bergmann1-1/+1
When CONFIG_PERF_EVENTS is disabled, we cannot compile the pmu portion of the amdgpu driver: drivers/gpu/drm/amd/amdgpu/amdgpu_pmu.c:48:38: error: no member named 'hw' in 'struct perf_event' struct hw_perf_event *hwc = &event->hw; ~~~~~ ^ drivers/gpu/drm/amd/amdgpu/amdgpu_pmu.c:51:13: error: no member named 'attr' in 'struct perf_event' if (event->attr.type != event->pmu->type) ~~~~~ ^ ... The same bug was already fixed by commit d155bef0636e ("amdgpu: make pmu support optional") but broken again by what looks like an incorrectly rebased patch. Fixes: 64f55e629237 ("drm/amdgpu: Add RAS EEPROM table.") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-02drm/amd/display: memory leakNavid Emamdoost7-0/+7
In dcn*_clock_source_create when dcn20_clk_src_construct fails allocated clk_src needs release. Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-02drm/amdgpu: fix multiple memory leaks in acp_hw_initNavid Emamdoost1-12/+22
In acp_hw_init there are some allocations that needs to be released in case of failure: 1- adev->acp.acp_genpd should be released if any allocation attemp for adev->acp.acp_cell, adev->acp.acp_res or i2s_pdata fails. 2- all of those allocations should be released if mfd_add_hotplug_devices or pm_genpd_add_device fail. 3- Release is needed in case of time out values expire. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-02drm/amdgpu: return tcc_disabled_mask to userspaceMarek Olšák4-1/+17
UMDs need this for correct programming of harvested chips. Signed-off-by: Marek Olšák <marek.olsak@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-02drm/amdgpu: don't increment vram lost if we are in hibernationAlex Deucher2-4/+8
We reset the GPU as part of our hibernation sequence so we need to make sure we don't mark vram as lost in that case. Bug: https://bugs.freedesktop.org/show_bug.cgi?id=111879 Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-02Revert "drm/amdgpu: disable stutter mode for renoir"Aaron Liu1-2/+0
This reverts commit 5813f97a5969bf1e7e723397a74e00b5de7278d6. Since SBIOS WCD9925N, NMI printing disappeared. Hence enable stutter mode. Signed-off-by: Aaron Liu <aaron.liu@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-02drm/amd/powerplay: add sensor lock support for smuKevin Wang5-0/+9
when multithreading access sysfs of amdgpu_pm_info at the sametime. the swsmu driver cause smu firmware hang. eg: single thread access: Message A + Param A ==> right Message B + Param B ==> right Message C + Param C ==> right multithreading access: Message A + Param B ==> error Message B + Param A ==> error Message C + Param C ==> right the patch will add sensor lock(mutex) to avoid this error. Signed-off-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 5.3.x
2019-10-02drm/amd/powerplay: change metrics update period from 1ms to 100msKevin Wang1-1/+1
v2: change period from 10ms to 100ms (typo error) too high frequence to update mertrics table will cause smu firmware error,so change mertrics table update period from 1ms to 100ms (navi10, 12, 14) Signed-off-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 5.3.x
2019-10-02drm/amdgpu: revert "disable bulk moves for now"Christian König1-2/+0
This reverts commit a213c2c7e235cfc0e0a161a558f7fdf2fb3a624a. The changes to fix this should have landed in 5.1. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Zhou, David(ChunMing) <David1.Zhou@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-02drm/i915: Clean up encoder->crtc_mask setupVille Syrjälä7-15/+14
Use BIT(pipe) for better legibility when populating the crtc_mask for encoders. Also remove the redundant possible_crtcs setup for the TV encoder. Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190708162048.4286-11-ville.syrjala@linux.intel.com
2019-10-02drm/i915: Populate possible_crtcs correctlyVille Syrjälä1-1/+16
Don't advertize non-exisiting crtcs in the encoder possible_crtcs bitmask. Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190708162048.4286-9-ville.syrjala@linux.intel.com
2019-10-02drm/i915/gem: Refactor tests on obj->ops->flagsChris Wilson1-5/+12
We repeat obj->ops->flags in our object checks, so pull that into its own little helper for clarity. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191002123014.1545-1-chris@chris-wilson.co.uk
2019-10-02drm/i915/selftests: Extract random_offset() for use with a prngChris Wilson3-5/+33
For selftests, we desire repeatability and so prefer using a prng with known seed over true randomness. Extract random_offset() as a selftest utility that can take the prng state. Suggested-by: Matthew Auld <matthew.auld@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191002122430.23205-1-chris@chris-wilson.co.uk
2019-10-02drm/i915: Fix g4x sprite scaling stride check with GTT remappingVille Syrjälä1-2/+3
I forgot to update the g4x sprite scaling stride check when GTT remapping was introduced. The stride of the original framebuffer is irrelevant when remapping is used and instead we want to check the stride of the remapped view. Also drop the duplicate width_bytes check. We already check that a few lines earlier. Fixes: df79cf441910 ("drm/i915: Store the final plane stride in plane_state") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190930183045.662-1-ville.syrjala@linux.intel.com Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
2019-10-02drm/i915: Polish intel_tv_mode_valid()Ville Syrjälä1-4/+3
Drop the tv_mode NULL check since intel_tv_mode_find() never actually returns NULL, and flip the condition around so that the MODE_OK case is at the end, which is customary to all the other .mode_valid() implementations. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191001154629.11063-2-ville.syrjala@linux.intel.com Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
2019-10-02drm/i915: Limit MST modes based on plane size tooVille Syrjälä1-1/+2
When adding the max plane size checks to the .mode_valid() hooks I naturally forgot about MST. Take care of that one as well. Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Sean Paul <sean@poorly.run> Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Fixes: 2d20411e25a3 ("drm/i915: Don't advertise modes that exceed the max plane size") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191001154629.11063-1-ville.syrjala@linux.intel.com Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
2019-10-02drm/msm: use drm_debug_enabled() to check for debug categoriesJani Nikula1-2/+2
Allow better abstraction of the drm_debug global variable in the future. No functional changes. v2: Move unlikely() to drm_debug_enabled() Cc: Rob Clark <robdclark@gmail.com> Cc: Sean Paul <sean@poorly.run> Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Reviewed-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/c7142cdebb5f6fed527272b333cd6c43c0aa68ec.1569329774.git.jani.nikula@intel.com
2019-10-02drm/i2c/sil164: use drm_debug_enabled() to check for debug categoriesJani Nikula1-1/+1
Allow better abstraction of the drm_debug global variable in the future. No functional changes. Cc: Francisco Jerez <currojerez@riseup.net> Reviewed-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/f6f65ca7e27e949533e8cd1f43c61ecac73c658e.1569329774.git.jani.nikula@intel.com
2019-10-02drm/etnaviv: use drm_debug_enabled() to check for debug categoriesJani Nikula1-4/+4
Allow better abstraction of the drm_debug global variable in the future. No functional changes. Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Russell King <linux+etnaviv@armlinux.org.uk> Cc: Christian Gmeiner <christian.gmeiner@gmail.com> Cc: etnaviv@lists.freedesktop.org Acked-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/f202f2cdd7c3176649dadeb48a6da4b208e9e829.1569329774.git.jani.nikula@intel.com
2019-10-02drm/print: add drm_debug_enabled()Jani Nikula7-13/+13
Add helper to check if a drm debug category is enabled. Convert drm core to use it. No functional changes. v2: Move unlikely() to drm_debug_enabled() (Eric) v3: Keep unlikely() when combined with other conditions (Eric) Cc: Eric Engestrom <eric@engestrom.ch> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Eric Engestrom <eric@engestrom.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191001140614.26909-1-jani.nikula@intel.com
2019-10-02drm/print: move drm_debug variable to drm_print.[ch]Jani Nikula2-17/+19
Move drm_debug variable declaration and definition to where they are relevant and needed. No functional changes. Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Eric Engestrom <eric@engestrom.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/71a566c68883b6e6c61414cd9f7c36c84015edb1.1569329774.git.jani.nikula@intel.com
2019-10-02drm/i915/display: abstract all vgaarb access to intel_vga.[ch]Jani Nikula10-146/+194
Split out the code related to vga client and vgaarb all over the place into new intel_vga.[ch]. No functional changes. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191001152506.7854-1-jani.nikula@intel.com
2019-10-02drm/i915/userptr: Never allow userptr into the mappable GGTTChris Wilson5-1/+19
Daniel Vetter uncovered a nasty cycle in using the mmu-notifiers to invalidate userptr objects which also happen to be pulled into GGTT mmaps. That is when we unbind the userptr object (on mmu invalidation), we revoke all CPU mmaps, which may then recurse into mmu invalidation. We looked for ways of breaking the cycle, but the revocation on invalidation is required and cannot be avoided. The only solution we could see was to not allow such GGTT bindings of userptr objects in the first place. In practice, no one really wants to use a GGTT mmapping of a CPU pointer... Just before Daniel's explosive lockdep patches land in v5.4-rc1, we got a genuine blip from CI: <4>[ 246.793958] ====================================================== <4>[ 246.793972] WARNING: possible circular locking dependency detected <4>[ 246.793989] 5.3.0-gbd6c56f50d15-drmtip_372+ #1 Tainted: G U <4>[ 246.794003] ------------------------------------------------------ <4>[ 246.794017] kswapd0/145 is trying to acquire lock: <4>[ 246.794030] 000000003f565be6 (&dev->struct_mutex/1){+.+.}, at: userptr_mn_invalidate_range_start+0x18f/0x220 [i915] <4>[ 246.794250] but task is already holding lock: <4>[ 246.794263] 000000001799cef9 (&anon_vma->rwsem){++++}, at: page_lock_anon_vma_read+0xe6/0x2a0 <4>[ 246.794291] which lock already depends on the new lock. <4>[ 246.794307] the existing dependency chain (in reverse order) is: <4>[ 246.794322] -> #3 (&anon_vma->rwsem){++++}: <4>[ 246.794344] down_write+0x33/0x70 <4>[ 246.794357] __vma_adjust+0x3d9/0x7b0 <4>[ 246.794370] __split_vma+0x16a/0x180 <4>[ 246.794385] mprotect_fixup+0x2a5/0x320 <4>[ 246.794399] do_mprotect_pkey+0x208/0x2e0 <4>[ 246.794413] __x64_sys_mprotect+0x16/0x20 <4>[ 246.794429] do_syscall_64+0x55/0x1c0 <4>[ 246.794443] entry_SYSCALL_64_after_hwframe+0x49/0xbe <4>[ 246.794456] -> #2 (&mapping->i_mmap_rwsem){++++}: <4>[ 246.794478] down_write+0x33/0x70 <4>[ 246.794493] unmap_mapping_pages+0x48/0x130 <4>[ 246.794519] i915_vma_revoke_mmap+0x81/0x1b0 [i915] <4>[ 246.794519] i915_vma_unbind+0x11d/0x4a0 [i915] <4>[ 246.794519] i915_vma_destroy+0x31/0x300 [i915] <4>[ 246.794519] __i915_gem_free_objects+0xb8/0x4b0 [i915] <4>[ 246.794519] drm_file_free.part.0+0x1e6/0x290 <4>[ 246.794519] drm_release+0xa6/0xe0 <4>[ 246.794519] __fput+0xc2/0x250 <4>[ 246.794519] task_work_run+0x82/0xb0 <4>[ 246.794519] do_exit+0x35b/0xdb0 <4>[ 246.794519] do_group_exit+0x34/0xb0 <4>[ 246.794519] __x64_sys_exit_group+0xf/0x10 <4>[ 246.794519] do_syscall_64+0x55/0x1c0 <4>[ 246.794519] entry_SYSCALL_64_after_hwframe+0x49/0xbe <4>[ 246.794519] -> #1 (&vm->mutex){+.+.}: <4>[ 246.794519] i915_gem_shrinker_taints_mutex+0x6d/0xe0 [i915] <4>[ 246.794519] i915_address_space_init+0x9f/0x160 [i915] <4>[ 246.794519] i915_ggtt_init_hw+0x55/0x170 [i915] <4>[ 246.794519] i915_driver_probe+0xc9f/0x1620 [i915] <4>[ 246.794519] i915_pci_probe+0x43/0x1b0 [i915] <4>[ 246.794519] pci_device_probe+0x9e/0x120 <4>[ 246.794519] really_probe+0xea/0x3d0 <4>[ 246.794519] driver_probe_device+0x10b/0x120 <4>[ 246.794519] device_driver_attach+0x4a/0x50 <4>[ 246.794519] __driver_attach+0x97/0x130 <4>[ 246.794519] bus_for_each_dev+0x74/0xc0 <4>[ 246.794519] bus_add_driver+0x13f/0x210 <4>[ 246.794519] driver_register+0x56/0xe0 <4>[ 246.794519] do_one_initcall+0x58/0x300 <4>[ 246.794519] do_init_module+0x56/0x1f6 <4>[ 246.794519] load_module+0x25bd/0x2a40 <4>[ 246.794519] __se_sys_finit_module+0xd3/0xf0 <4>[ 246.794519] do_syscall_64+0x55/0x1c0 <4>[ 246.794519] entry_SYSCALL_64_after_hwframe+0x49/0xbe <4>[ 246.794519] -> #0 (&dev->struct_mutex/1){+.+.}: <4>[ 246.794519] __lock_acquire+0x15d8/0x1e90 <4>[ 246.794519] lock_acquire+0xa6/0x1c0 <4>[ 246.794519] __mutex_lock+0x9d/0x9b0 <4>[ 246.794519] userptr_mn_invalidate_range_start+0x18f/0x220 [i915] <4>[ 246.794519] __mmu_notifier_invalidate_range_start+0x85/0x110 <4>[ 246.794519] try_to_unmap_one+0x76b/0x860 <4>[ 246.794519] rmap_walk_anon+0x104/0x280 <4>[ 246.794519] try_to_unmap+0xc0/0xf0 <4>[ 246.794519] shrink_page_list+0x561/0xc10 <4>[ 246.794519] shrink_inactive_list+0x220/0x440 <4>[ 246.794519] shrink_node_memcg+0x36e/0x740 <4>[ 246.794519] shrink_node+0xcb/0x490 <4>[ 246.794519] balance_pgdat+0x241/0x580 <4>[ 246.794519] kswapd+0x16c/0x530 <4>[ 246.794519] kthread+0x119/0x130 <4>[ 246.794519] ret_from_fork+0x24/0x50 <4>[ 246.794519] other info that might help us debug this: <4>[ 246.794519] Chain exists of: &dev->struct_mutex/1 --> &mapping->i_mmap_rwsem --> &anon_vma->rwsem <4>[ 246.794519] Possible unsafe locking scenario: <4>[ 246.794519] CPU0 CPU1 <4>[ 246.794519] ---- ---- <4>[ 246.794519] lock(&anon_vma->rwsem); <4>[ 246.794519] lock(&mapping->i_mmap_rwsem); <4>[ 246.794519] lock(&anon_vma->rwsem); <4>[ 246.794519] lock(&dev->struct_mutex/1); <4>[ 246.794519] *** DEADLOCK *** v2: Say no to mmap_ioctl Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111744 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111870 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: stable@vger.kernel.org Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190928082546.3473-1-chris@chris-wilson.co.uk
2019-10-01drm/komeda: Workaround for broken FLIP_COMPLETE timestampsMihail Atanassov1-0/+2
When initially turning a crtc on, drm_reset_vblank_timestamp will set the vblank timestamp to 0 for any driver that doesn't provide a ->get_vblank_timestamp() hook. Unfortunately, the FLIP_COMPLETE event depends on that timestamp, and the only way to regenerate a valid one is to have vblank interrupts enabled and have a valid in-ISR call to drm_crtc_handle_vblank. Additionally, if the user doesn't request vblanks but _does_ request FLIP_COMPLETE events, we still don't have a good timestamp: it'll be the same stamp as the last vblank one. Work around the issue by always enabling vblanks when the CRTC is on. Reducing the amount of time that PL0 has to be unmasked would be nice to fix at a later time. Changes since v1 [https://patchwork.freedesktop.org/patch/331727/]: - moved drm_crtc_vblank_put call to the ->atomic_disable() hook Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Liviu Dudau <Liviu.Dudau@arm.com> Signed-off-by: Mihail Atanassov <mihail.atanassov@arm.com> Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com> Signed-off-by: Ayan kumar halder <ayan.halder@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191001142121.13939-1-mihail.atanassov@arm.com
2019-10-01drm/i915/dp: Fix DP MST error after unplugging TypeC cableSrinivasan S1-1/+1
This patch avoids DP MST payload error message in dmesg, as it is trying to update the payload to the disconnected DP MST device. After DP MST device is disconnected we should not be updating the payload and hence remove the error. v2: Removed the connector status check and converted from error to debug. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111632 Signed-off-by: Srinivasan S <srinivasan.s@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1569371742-109402-1-git-send-email-srinivasan.s@intel.com
2019-10-01drm/komeda: Use IRQ_RETVAL shorthand in d71_irq_handlerMihail Atanassov1-1/+1
No change in behaviour; IRQ_RETVAL is about twice as popular as manually writing out the ternary. Signed-off-by: Mihail Atanassov <mihail.atanassov@arm.com> Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com> Signed-off-by: Ayan kumar halder <ayan.halder@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190920151247.25128-1-mihail.atanassov@arm.com
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.