| Age | Commit message (Collapse) | Author | Files | Lines |
|
We don't care about the result of the read, so it may be garbage, we
only care that the mmio is flushed. As such, we can forgo using an
individual forcewake and lock around any posting-read for an engine.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190703155225.9501-4-chris@chris-wilson.co.uk
|
|
We can assume the caller is holding a blanket forcewake for the
register writes during resume, and so we can skip taking individual
locks around each write inside execlists resume.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190703155225.9501-3-chris@chris-wilson.co.uk
|
|
During post-reset resume, we call intel_mocs_init_engine to reinitialise
the MOCS registers. Suprisingly, especially when enhanced by lockdep,
the acquisition of the forcewake lock around each register write takes a
substantial portion of the reset time. We don't need to use the
individual forcewake here as we can assume that the caller is holding a
blanket forcewake for the reset&resume and the resume is serialised.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190703155225.9501-2-chris@chris-wilson.co.uk
|
|
The intent of the assert is to document that the caller took the
appropriate wakerefs for the function. However, as Tvrtko pointed out,
we simply check whether the fw_domains are active and may be confused by
the auto wakeref which may be dropped between the check and use. Let's
be more careful in the assert and check that each fw_domain has an
explicit caller wakeref above and beyond the automatic wakeref.
v2: Fix spelling for config DRM_I915_DEBUG_RUNTIME_PM
v3: Timer may still be active after we drop the autowakeref, we need to
check domain->active instead.
v4: The timer checks domain->active, but we still need to check the
timer. (This is starting to look weird...)
Reported-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190704102048.6436-1-chris@chris-wilson.co.uk
|
|
Noticed while comparing register dump of how bootloader configures DSI
vs how kernel configures. It seems the bridge still works either way,
but fixing this clears the 'CHA_DATATYPE_ERR' error status bit.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190702154419.20812-4-robdclark@gmail.com
|
|
Add a debugfs file to show status registers.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190702154419.20812-3-robdclark@gmail.com
|
|
The bridge has pretty good docs, lets add a link to make them easier to
find.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190702154419.20812-2-robdclark@gmail.com
|
|
Trying to drain a workqueue while we may still be adding to it from
background tasks is, according to kernel/workqueue.c, verboten. So, add
a flush_workqueue() at the start of our cleanup procedure.
References: https://bugs.freedesktop.org/show_bug.cgi?id=110550
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190703171913.16585-4-chris@chris-wilson.co.uk
|
|
The render state is used to initialise the default RCS context, and only
used during early setup from within the gt code. As such, it makes a
good candidate for placing within gt/, even if it is not yet entirely
clean of our GEM heritage.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190704091925.7391-1-chris@chris-wilson.co.uk
|
|
If we hit an error while allocating the page tables, we have to unwind
the incomplete updates, and wish to free the unused pd. However, we are
not allowed to be hoding the spinlock at that point, and so must use the
later free to defer it until after we drop the lock.
<3> [414.363795] BUG: sleeping function called from invalid context at drivers/gpu/drm/i915/i915_gem_gtt.c:472
<3> [414.364167] in_atomic(): 1, irqs_disabled(): 0, pid: 3905, name: i915_selftest
<4> [414.364406] 3 locks held by i915_selftest/3905:
<4> [414.364408] #0: 0000000034fe8aa8 (&dev->mutex){....}, at: device_driver_attach+0x18/0x50
<4> [414.364415] #1: 000000006bd8a560 (&dev->struct_mutex){+.+.}, at: igt_ctx_exec+0xb7/0x410 [i915]
<4> [414.364476] #2: 000000003dfdc766 (&(&pd->lock)->rlock){+.+.}, at: gen8_ppgtt_alloc_pdp+0x448/0x540 [i915]
<3> [414.364529] Preemption disabled at:
<4> [414.364530] [<0000000000000000>] 0x0
<4> [414.364696] CPU: 0 PID: 3905 Comm: i915_selftest Tainted: G U 5.2.0-rc7-CI-CI_DRM_6403+ #1
<4> [414.364698] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.10.1-0-g8891697-prebuilt.qemu-project.org 04/01/2014
<4> [414.364699] Call Trace:
<4> [414.364704] dump_stack+0x67/0x9b
<4> [414.364708] ___might_sleep+0x167/0x250
<4> [414.364777] vm_free_page+0x24/0xc0 [i915]
<4> [414.364852] free_pd+0xf/0x20 [i915]
<4> [414.364897] gen8_ppgtt_alloc_pdp+0x489/0x540 [i915]
<4> [414.364946] gen8_ppgtt_alloc_4lvl+0x8e/0x2e0 [i915]
<4> [414.364992] ppgtt_bind_vma+0x2e/0x60 [i915]
<4> [414.365039] i915_vma_bind+0xe8/0x2c0 [i915]
<4> [414.365088] __i915_vma_do_pin+0xa1/0xd20 [i915]
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111050
Fixes: 1d1b5490b91c ("drm/i915/gtt: Replace struct_mutex serialisation for allocation")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190703171913.16585-3-chris@chris-wilson.co.uk
|
|
The event will be sent as part of the vblank enable during the modeset
if the crtc is not being kept disabled.
Fixes: 5f2f911578fb ("drm/imx: atomic phase 3 step 1: Use atomic configuration")
Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
Notify drm core before sending pending events during crtc disable.
This fixes the first event after disable having an old stale timestamp
by having drm_crtc_vblank_off update the timestamp to now.
This was seen while debugging weston log message:
Warning: computed repaint delay is insane: -8212 msec
This occurred due to:
1. driver starts up
2. fbcon comes along and restores fbdev, enabling vblank
3. vblank_disable_fn fires via timer disabling vblank, keeping vblank
seq number and time set at current value
(some time later)
4. weston starts and does a modeset
5. atomic commit disables crtc while it does the modeset
6. ipu_crtc_atomic_disable sends vblank with old seq number and time
Fixes: a474478642d5 ("drm/imx: fix crtc vblank state regression")
Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
Fix sparse warning:
drivers/gpu/drm/bridge/sii902x.c:665:5: warning:
symbol 'sii902x_audio_digital_mute' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190614153623.28708-1-yuehaibing@huawei.com
|
|
drm-next-5.3-2019-06-27:
amdgpu:
- Fix warning on 32 bit ARM
- Fix compilation on big endian
- Misc bug fixes
ttm:
- Live lock fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190628015555.3384-1-alexander.deucher@amd.com
|
|
drm-misc-next-fixes for v5.3:
- Fixes to the tfp410 bridge.
- Small build fix for vga_switcheroo to prevent building against modular fbcon.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20a62234-bc27-00eb-e0e2-22b55eec1cb2@linux.intel.com
|
|
Armada DRM updates:
- Fix interlace support.
- use __drm_atomic_helper_plane_reset in overlay reset.
- since the overlay and video planes use essentially the same format
registers, precompute their values while validating.
- fix a long-standing deficiency with overlay planes and interlace modes
- calculate plane starting address at atomic_check stage rather than
when we're programming the registers.
- add gamma support.
- ensure mode adjustments made by other components are properly handled
in the driver and applied to the CRTC-programmed mode.
- add and use register definitions for the "REG4F" register.
- use drm_atomic_helper_shutdown() when tearing down to ensure that the
hardware is properly shutdown.
- add CRTC-level mode validation to ensure that we don't allow a mode
that the CRTC-level hardware can not support.
- improve the clocking selection for Armada 510 support.
- move CRTC debugfs files into the crtc-specific directory, using the
DRM helper to create these files.
- patch from Lubomir Rintel to replace a simple framebuffer.
- use the OF graph walker rather than open-coding this.
- eliminate a useless check for the availability of the remote's parent
which isn't required.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Russell King <rmk@armlinux.org.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190702091313.GA23442@rmk-PC.armlinux.org.uk
|
|
- Drop the use of drmP.h header file
drmP.h header file has been deprecated so this patch drops the use of
this header, and instead includes appropriate header files required.
- Add COMPILE_TEST flag
This patch adds COMPILE_TEST dependency to exynos drm driver to
increase build test coverage. And also, it includes vmalloc.h
header file to fix one build warning which is introduced when
building the Linux kernel using sh.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAAQKjZMdBdD8oEa0cNv78FjrpOqu20ozTTvuPEm_XnVo2gRhCQ@mail.gmail.com
|
|
Fix a kernel nullptr deref on module
unload when any etnaviv GPU failed to initialize properly.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas Stach <l.stach@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1561974148.2321.1.camel@pengutronix.de
|
|
panfrost- Avoid double free by deleting GEM handle in create_bo failure
path (Boris)
Cc: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20190704001302.GA260390@art_vandelay
|
|
drm-fixes-5.2-2019-07-02:
Fixes for stable
amdgpu:
- stability fix for gfx9
- regression fix for HG on some polaris boards
- crash fix for some new OEM boards
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190703015705.3162-1-alexander.deucher@amd.com
|
|
This reverts commit 220df83a5394fbf7c1486ba7848794b7b351d598.
Turns out drm_gem_dumb_map_offset really only worked for the dumb buffer
case, so revert the name change.
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
This reverts commit 583bbf46133c726bae277e8f4e32bfba2a528c7f.
Turns out we need mmap to work on imported BOs even if the current code
is buggy.
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
This works around difficult-to-reproduce soft hangs on oversubscribed
runlists.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oak Zeng <Oak.Zeng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
New flag to disable an idle runlist optimization that is causing soft
hangs with some diffult-to-reproduce customer workloads. This will
serve as a workaround until the problem can be reproduced and the
root-cause determined.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oak Zeng <Oak.Zeng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Restore the code that resets mem->invalid. Othewise so mapping
userptrs after they got an MMU notifiers would always be skipped.
This also avoids unnecessarily calling get_user_pages on BOs that
have not been invalidated since the last try.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
We don't want eviction fences to trigger when waiting for page table
updates to complete during restore. In theory there shouldn't be any
unsignaled eviction fences in the PD reservation object, but I'm
seeing them in instrumented code for reasons not fully understood.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Oversubscription of queues or processes results in poor performance
mostly because HWS blinbly schedules busy and idle queues, resulting
in poor occupancy if many queues are idle.
Let users know with a warning message when transitioning from a
non-oversubscribed to an oversubscribed runlist.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oak Zeng <Oak.Zeng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Adding N & CTS values for 10/12 bit deep color from Appendix C
table in HDMI 2.0 spec. The correct values for N is not chosen
automatically by hardware for deep color modes.
v2: Remove unnecessary initialization of size
Signed-off-by: Aditya Swarup <aditya.swarup@intel.com>
Cc: Clint Taylor <Clinton.A.Taylor@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190627220708.31700-2-aditya.swarup@intel.com
|
|
Use port_clock to check the clock values in n/cts lookup table instead
of crtc_clock. As port_clock is already adjusted based on color mode set
(8 bit or deep color), this will help in checking clock values for deep
color modes from n/cts lookup table.
Signed-off-by: Aditya Swarup <aditya.swarup@intel.com>
Cc: Clint Taylor <Clinton.A.Taylor@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190627220708.31700-1-aditya.swarup@intel.com
|
|
When SAGV is forced to disabled/min/med/max in the BIOS pcode will
only hand us a single QGV point instead of the normal three. Fix
the code to deal with that instead declaring the bandwidth limit
to be 0 MB/s (and thus preventing any planes from being enabled).
Also shrink the max_bw sturct a bit while at it, and change the
deratedbw type to unsigned since the code returns the bw as
an unsigned int.
Since we now keep track of how many qgv points we got from pcode
we can drop the earlier check added for the "pcode doesn't
support the memory subsystem query" case.
Cc: felix.j.degrood@intel.com
Cc: Mark Janes <mark.a.janes@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Clint Taylor <Clinton.A.Taylor@intel.com>
Fixes: c457d9cf256e ("drm/i915: Make sure we have enough memory bandwidth on ICL")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110838
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190606124210.3482-1-ville.syrjala@linux.intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
|
|
Since a shrinker may be forced to wait on GPU activity,
i915_active_wait(&vma->active) must be safe for use inside a shrinker,
and so let's mark up the lock as being acquired by the shrinker to avoid
any nasty surprises creeping in.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190703091726.11690-8-chris@chris-wilson.co.uk
|
|
Make the lockchains more deterministic via i915_active by flagging the
potential lock.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190703091726.11690-7-chris@chris-wilson.co.uk
|
|
As we have dropped the final reference to the object, we do not need to
wait until after the rcu grace period to drop its pages. We still require
struct_mutex to completely unbind the object to release the pages, so we
still need a free-worker to manage that from process context. By
scheduling the release of pages before waiting for the rcu should mean
that we are not trapping those pages from beyond the reach of the
shrinker.
v2: Pass along the request to skip if the vma is busy to the underlying
unbind routine, to avoid checking the reservation underneath the
i915->mm.obj_lock which may be used from inside irq context.
v3: Flip the bit for unbinding while active, for later convenience.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111035
Fixes: a93615f900bd ("drm/i915: Throw away the active object retirement complexity")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190703091726.11690-6-chris@chris-wilson.co.uk
|
|
Be a little more hesitant before injecting a timeslice, and try to take
into account any change in priority that is due for the running task
before switching to another task. This will allow us to arbitrarily
prevent switching away from a request if we deem it necessarily to
disable preemption, for instance.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190703091726.11690-9-chris@chris-wilson.co.uk
|
|
Remember to lock the drm_mm as we modify it, lest it be modified in the
background by retire/free workers!
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190703091726.11690-2-chris@chris-wilson.co.uk
|
|
We frequently, but not frequently enough!, remember to flush residual
operations and objects at the end of a live subtest. The purpose is to
cleanup after every subtest, leaving a clean slate for the next subtest,
and perform early detection of leaky state. As this should ideally be
common for all live subtests, pull the task into a common teardown
routine.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190703091726.11690-1-chris@chris-wilson.co.uk
|
|
icl-dsi is dying on suspend/resume at
RIP: 0010:icl_update_active_dpll+0x2c/0xa0 [i915]
which appears due to the loss of the time primary_port across suspend.
Protect against the potential NULL dereference by assuming
ICL_PORT_DPLL_DEFAULT unless the port is actively specified otherwise.
Fixes: 24a7bfe0c2d7 ("drm/i915: Keep the TypeC port mode fixed when the port is active")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190702140950.7069-1-chris@chris-wilson.co.uk
|
|
When eliminating our use of drm_irq_install() I failed to convert
all our synchronize_irq() calls to consult pdev->irq instead of
dev_priv->drm.irq. As we no longer populate dev_priv->drm.irq
we're no longer synchronizing against anything.
v2: Add intel_syncrhonize_irq() (Chris)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reported-by: Imre Deak <imre.deak@intel.com>
Fixes: b318b82455bd ("drm/i915: Nuke drm_driver irq vfuncs")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111012
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190702151723.29739-1-ville.syrjala@linux.intel.com
|
|
so the hyper-v clocksource update can be applied.
|
|
PRIME functionality is now provided by GEM object functions. The driver
callback functions are obsolete. So this patch renames them and turns
them into static internal functions of the VRAM helper library. The
implementation of gem_prime_mmap is now unused and the patch removes it.
v3:
* kept each renamed function at its original location within file
* kept documentation
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190702115012.4418-6-tzimmermann@suse.de
|
|
The vbox driver uses VRAM helpers for memory management. These helpers
provide a basic implementation of PRIME functions, so the vbox driver's
empty implmentation can be removed. As a side effect of this change,
vbox can now use generic framebuffer emulation.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190702115012.4418-5-tzimmermann@suse.de
|
|
The GEM object's free function is now called through struct
drm_gem_object_funcs.free. The function struct drm_driver.gem_prime_mmap
is now required for mmap'ing GEM objects to userspace.
v2:
* set drm_driver.gem_prime_mmap to drm_gem_prime_mmap()
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190702115012.4418-4-tzimmermann@suse.de
|
|
VRAM PRIME helpers are now called through GEM object functions. The
driver callback functions are obsolete.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190702115012.4418-3-tzimmermann@suse.de
|
|
PRIME functionality is now provided via the callback functions in
struct drm_gem_object_funcs. The driver-structure functions are obsolete.
As a side effect of this patch, VRAM-based drivers get basic PRIME
support automatically without having to set any flags or additional
fields.
v2:
- use existing PRIME functions for object's table
v3:
- move object table to EOF so it can refer to internal interfaces
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190702115012.4418-2-tzimmermann@suse.de
|
|
Just for cleanup.
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
All asics newer than vega10 use client ids, so simplify the
check.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
We missed one place where we check PPGTT-only platform for PPGTT
presence. Let's remove it.
While I'm here let's assert that this particular code is never called on
pre-gen8 platforms.
References: 4bdafb9ddfa4 ("drm/i915: Remove i915.enable_ppgtt override")
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190702113149.21200-2-michal.winiarski@intel.com
|
|
This reverts commit 4395890a48551982549d222d1923e2833dac47cf.
It's been over a year since this was merged, and the actual users of
intel_ppat_get / intel_ppat_put never materialized.
Time to remove it!
v2: Unbreak suspend (Chris)
v3: Rebase, drop fixes tag to avoid confusion
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190702113149.21200-1-michal.winiarski@intel.com
|
|
Christoph Hellwig says:
====================
Below is a series that cleans up the dev_pagemap interface so that it is
more easily usable, which removes the need to wrap it in hmm and thus
allowing to kill a lot of code
Changes since v3:
- pull in "mm/swap: Fix release_pages() when releasing devmap pages" and
rebase the other patches on top of that
- fold the hmm_devmem_add_resource into the DEVICE_PUBLIC memory removal
patch
- remove _vm_normal_page as it isn't needed without DEVICE_PUBLIC memory
- pick up various ACKs
Changes since v2:
- fix nvdimm kunit build
- add a new memory type for device dax
- fix a few issues in intermediate patches that didn't show up in the end
result
- incorporate feedback from Michal Hocko, including killing of
the DEVICE_PUBLIC memory type entirely
Changes since v1:
- rebase
- also switch p2pdma to the internal refcount
- add type checking for pgmap->type
- rename the migrate method to migrate_to_ram
- cleanup the altmap_valid flag
- various tidbits from the reviews
====================
Conflicts resolved by:
- Keeping Ira's version of the code in swap.c
- Using the delete for the section in hmm.rst
- Using the delete for the devmap code in hmm.c and .h
* branch 'hmm-devmem-cleanup.4': (24 commits)
mm: don't select MIGRATE_VMA_HELPER from HMM_MIRROR
mm: remove the HMM config option
mm: sort out the DEVICE_PRIVATE Kconfig mess
mm: simplify ZONE_DEVICE page private data
mm: remove hmm_devmem_add
mm: remove hmm_vma_alloc_locked_page
nouveau: use devm_memremap_pages directly
nouveau: use alloc_page_vma directly
PCI/P2PDMA: use the dev_pagemap internal refcount
device-dax: use the dev_pagemap internal refcount
memremap: provide an optional internal refcount in struct dev_pagemap
memremap: replace the altmap_valid field with a PGMAP_ALTMAP_VALID flag
memremap: remove the data field in struct dev_pagemap
memremap: add a migrate_to_ram method to struct dev_pagemap_ops
memremap: lift the devmap_enable manipulation into devm_memremap_pages
memremap: pass a struct dev_pagemap to ->kill and ->cleanup
memremap: move dev_pagemap callbacks into a separate structure
memremap: validate the pagemap type passed to devm_memremap_pages
mm: factor out a devm_request_free_mem_region helper
mm: export alloc_pages_vma
...
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Required for dependencies in the next patches.
|