aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/gpu
AgeCommit message (Collapse)AuthorFilesLines
2019-03-05drm/i915/gtt: Use optimised memset32/64 for clearing PTEChris Wilson1-9/+3
Replace the open-coded memset loops with the memset32/64 routines that reduce to a single instruction or two: add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-83 (-83) Function old new delta gen6_ppgtt_clear_range 371 344 -27 gen8_ppgtt_clear_pd 575 519 -56 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190304230646.23714-1-chris@chris-wilson.co.uk
2019-03-04drm/i915: Fix bit name in PP_STATUS registerLucas De Marchi1-1/+1
According to the spec PP_SEQUENCE_STATE_ON_S1_1 is the correct name, so just rename it. Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190302011405.6405-1-lucas.demarchi@intel.com
2019-03-04drm/i915: allow platforms without eDP transcoderLucas De Marchi3-4/+8
Define a HAS_TRANSCODER_EDP() macro that checks if we have defined an offset for this transcoder. This allows platforms to be defined without eDP transcoder. Cc: Mika Kahola <mika.kahola@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Mika Kahola <mika.kahola@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190222230254.20351-2-lucas.demarchi@intel.com
2019-03-04drm/i915: refactor transcoders reporting on error stateLucas De Marchi1-9/+12
Instead of keeping track of the number of transcoders, loop through all the interesting ones and check if there is a correspondent offset. Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Mika Kahola <mika.kahola@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190222230254.20351-1-lucas.demarchi@intel.com
2019-03-04drm/i915: Forcing a modeset when resetting HDMI linkJosé Roberto de Souza1-1/+1
With fastboot enabled in gen9+ it broke the HDMI reset as just setting mode_changed to true causes a fastset and here we want a full modeset that will disable and then enable the encoder of this HDMI link actually, so setting connectors_changed instead that will cause modeset as desired. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190302003349.19189-3-jose.souza@intel.com
2019-03-04drm/i915: Don't manually add connectors and planes stateJosé Roberto de Souza1-8/+0
drm_atomic_commit() call chain already takes care of adding connectors and planes, so lets no add then manually if not changing their states. drm_atomic_commit() drm_atomic_check_only() config->funcs->atomic_check()/intel_atomic_check() drm_atomic_helper_check() drm_atomic_helper_check_modeset() for_each_oldnew_crtc_in_state() drm_atomic_add_affected_connectors() drm_atomic_add_affected_planes() Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Lyude Paul <lyude@redhat.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190302003349.19189-2-jose.souza@intel.com
2019-03-04drm/i915: Fix atomic state leak when resetting HDMI linkJosé Roberto de Souza1-6/+1
Atomic state needs to be put even if the commit was successful. Fixes: dba14b27dd3c ("drm/i915: Reinitialize sink scrambling/TMDS clock ratio on HPD") Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Lyude Paul <lyude@redhat.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190302003349.19189-1-jose.souza@intel.com
2019-03-05Merge tag 'drm-misc-fixes-2019-02-22' of git://anongit.freedesktop.org/drm/drm-misc into drm-nextDave Airlie2-11/+33
drm-misc-fixes for v5.0: - Block fb changes for async atomic updates to prevent a use after free. - Fix ID mismatch error on load in bochs. - Fix memory leak when drm_setup fails. - Fixes around handling of DRM_AUTH. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/42113611-e2cd-6bdd-7de5-4f8ab5a0cbe6@linux.intel.com
2019-03-05drm/amd/display: Use vrr friendly pageflip throttling in DC.Mario Kleiner1-1/+27
In VRR mode, keep track of the vblank count of the last completed pageflip in amdgpu_crtc->last_flip_vblank, as recorded in the pageflip completion handler after each completed flip. Use that count to prevent mmio programming a new pageflip within the same vblank in which the last pageflip completed, iow. to throttle pageflips to at most one flip per video frame, while at the same time allowing to request a flip not only before start of vblank, but also anywhere within vblank. The old logic did the same, and made sense for regular fixed refresh rate flipping, but in vrr mode it prevents requesting a flip anywhere inside the possibly huge vblank, thereby reducing framerate in vrr mode instead of improving it, by delaying a slightly delayed flip requests up to a maximum vblank duration + 1 scanout duration. This would limit VRR usefulness to only help applications with a very high GPU demand, which can submit the flip request before start of vblank, but then have to wait long for fences to complete. With this method a flip can be both requested and - after fences have completed - executed, ie. it doesn't matter if the request (amdgpu_dm_do_flip()) gets delayed until deep into the extended vblank due to cpu execution delays. This also allows clients which want to regulate framerate within the vrr range a much more fine-grained control of flip timing, a feature that might be useful for video playback, and is very useful for neuroscience/vision research applications. In regular non-VRR mode, retain the old flip submission behavior. This to keep flip scheduling for fullscreen X11/GLX OpenGL clients intact, if they use the GLX_OML_sync_control extensions glXSwapBufferMscOML(, ..., target_msc,...) function with a specific target_msc target vblank count. glXSwapBuffersMscOML() or DRI3/Present PresentPixmap() will not flip at the proper target_msc for a non-zero target_msc if VRR mode is active with this patch. They'd often flip one frame too early. However, this limitation should not matter much in VRR mode, as scheduling based on vblank counts is pretty futile/unusable under variable refresh duration anyway, so no real extra harm is done. According to some testing already done with this patch by Nicholas on top of my tests, IGT tests didn't report any problems. If fixes stuttering and flickering when flipping at rates below the minimum vrr refresh rate. Fixes: bb47de736661 ("drm/amdgpu: Set FreeSync state using drm VRR properties") Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> Cc: <stable@vger.kernel.org> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Michel Dänzer <michel@daenzer.net> Tested-by: Bruno Filipe <bmilreu@gmail.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2019-03-04drm/i915: Fix the state checker for ICL Y planesVille Syrjälä1-1/+2
The plane used to scan out NV12 luma on ICL is logically off but actually on. Fix the state checker to account for this. Cc: Imre Deak <imre.deak@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109457 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190304131217.4338-1-ville.syrjala@linux.intel.com Reviewed-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2019-03-04drm/i915: Yet another if/else sort of newer to older platforms.Rodrigo Vivi4-90/+82
No functional change. Just a reorg to match the preferred behavior. When rebasing internal branch on top of latest sort I noticed few more cases that needs to get reordered. Let's do in a bundle this time and hoping there's no other missing places. v2: Check for HSW/BDW ULT before generic IS_HASWELL or IS_BROADWELL or it doesn't work as pointed by Ville. But also ULT came afterwards anyway. v3: Accepting suggestions from Lucas: Sort CNL/CFL, KBL/SKL, and use <= 8 removing chv and bdw. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190301172703.12139-1-rodrigo.vivi@intel.com
2019-03-04drm/i915: Acquire breadcrumb ref before cancellingChris Wilson1-10/+8
We may race the interrupt signaling with retirement, in which case the order in which we acquire the reference inside the interrupt is vital to provide the correct barrier against the request being freed in retirement, i.e. we need to acquire our reference before marking the breadcrumb as cancelled (as soon as the breadcrumb is cancelled retirement may drop its reference to the request without serialisation with the interrupt handler). <3>[ 683.372226] BUG i915_request (Tainted: G U ): Object already free <3>[ 683.372269] ----------------------------------------------------------------------------- <4>[ 683.372323] Disabling lock debugging due to kernel taint <3>[ 683.372393] INFO: Allocated in i915_request_alloc+0x169/0x810 [i915] age=0 cpu=2 pid=1420 <3>[ 683.372412] kmem_cache_alloc+0x21c/0x280 <3>[ 683.372478] i915_request_alloc+0x169/0x810 [i915] <3>[ 683.372540] i915_gem_do_execbuffer+0x84e/0x1ae0 [i915] <3>[ 683.372603] i915_gem_execbuffer2_ioctl+0x11b/0x420 [i915] <3>[ 683.372617] drm_ioctl_kernel+0x83/0xf0 <3>[ 683.372626] drm_ioctl+0x2f3/0x3b0 <3>[ 683.372636] do_vfs_ioctl+0xa0/0x6e0 <3>[ 683.372645] ksys_ioctl+0x35/0x60 <3>[ 683.372654] __x64_sys_ioctl+0x11/0x20 <3>[ 683.372664] do_syscall_64+0x55/0x190 <3>[ 683.372675] entry_SYSCALL_64_after_hwframe+0x49/0xbe <3>[ 683.372740] INFO: Freed in i915_request_retire_upto+0xfb/0x2e0 [i915] age=0 cpu=0 pid=1419 <3>[ 683.372807] i915_request_retire_upto+0xfb/0x2e0 [i915] <3>[ 683.372870] i915_request_add+0x3bd/0x9d0 [i915] <3>[ 683.372931] i915_gem_do_execbuffer+0x141c/0x1ae0 [i915] <3>[ 683.372991] i915_gem_execbuffer2_ioctl+0x11b/0x420 [i915] <3>[ 683.373001] drm_ioctl_kernel+0x83/0xf0 <3>[ 683.373008] drm_ioctl+0x2f3/0x3b0 <3>[ 683.373015] do_vfs_ioctl+0xa0/0x6e0 <3>[ 683.373023] ksys_ioctl+0x35/0x60 <3>[ 683.373030] __x64_sys_ioctl+0x11/0x20 <3>[ 683.373037] do_syscall_64+0x55/0x190 <3>[ 683.373045] entry_SYSCALL_64_after_hwframe+0x49/0xbe <3>[ 683.373054] INFO: Slab 0x0000000079bcdd71 objects=30 used=2 fp=0x000000006d77b8af flags=0x8000000000010201 <3>[ 683.373069] INFO: Object 0x000000006d77b8af @offset=24000 fp=0x000000007b061eab <3>[ 683.373083] Redzone 00000000ee47ef28: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................ <3>[ 683.373097] Redzone 000000000cb91471: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................ <3>[ 683.373111] Redzone 00000000cf2b86ee: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................ <3>[ 683.373125] Redzone 00000000f1f5a2cd: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................ <3>[ 683.373139] Object 000000006d77b8af: 00 00 00 00 5a 5a 5a 5a 00 3c 49 c0 ff ff ff ff ....ZZZZ.<I..... <3>[ 683.373153] Object 000000006f9b6204: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZZZZZ <3>[ 683.373167] Object 0000000091410ffb: e0 dd 6b fa 87 9f ff ff e0 dd 6b fa 87 9f ff ff ..k.......k..... <3>[ 683.373181] Object 000000004cdf799d: 20 de 6b fa 87 9f ff ff 3d 00 00 00 00 00 00 00 .k.....=....... <3>[ 683.373195] Object 00000000545afebc: aa b3 00 00 00 00 00 00 0f 00 00 00 00 00 00 00 ................ <3>[ 683.373209] Object 00000000e4a394a8: 25 bd bd 1b 9f 00 00 00 00 00 00 00 5a 5a 5a 5a %...........ZZZZ <3>[ 683.373223] Object 0000000029a7878a: 00 00 00 00 ad 4e ad de ff ff ff ff 5a 5a 5a 5a .....N......ZZZZ <3>[ 683.373237] Object 00000000d37797b3: ff ff ff ff ff ff ff ff e8 6e 57 c0 ff ff ff ff .........nW..... <3>[ 683.373251] Object 00000000d50414f6: 00 b3 c8 8e ff ff ff ff 80 b0 c8 8e ff ff ff ff ................ <3>[ 683.373265] Object 00000000c28e8847: 41 01 4b c0 ff ff ff ff 00 00 88 8e 88 9f ff ff A.K............. <3>[ 683.373279] Object 00000000c74212ab: 38 c1 6d 8a 88 9f ff ff 58 21 74 8a 88 9f ff ff 8.m.....X!t..... <3>[ 683.373293] Object 000000000d8012cf: c0 c1 6d 8a 88 9f ff ff 58 79 dd d9 87 9f ff ff ..m.....Xy...... <3>[ 683.373306] Object 00000000c9900b91: 98 d0 4e 8a 88 9f ff ff 58 3c e8 9b 88 9f ff ff ..N.....X<...... <3>[ 683.373320] Object 0000000044bb8c3d: 58 3c e8 9b 88 9f ff ff 64 f5 04 00 00 00 00 00 X<......d....... <3>[ 683.373334] Object 00000000180c4cca: 00 00 00 00 ad 4e ad de ff ff ff ff 5a 5a 5a 5a .....N......ZZZZ <3>[ 683.373348] Object 00000000c9044498: ff ff ff ff ff ff ff ff e0 6e 57 c0 ff ff ff ff .........nW..... <3>[ 683.373362] Object 0000000072d0dfb3: 00 00 00 00 00 00 00 00 c0 b1 c8 8e ff ff ff ff ................ <3>[ 683.373376] Object 0000000081f198b9: 55 01 4b c0 ff ff ff ff d8 de 6b fa 87 9f ff ff U.K.......k..... <3>[ 683.373390] Object 000000006a375a13: d8 de 6b fa 87 9f ff ff cc 05 39 c0 ff ff ff ff ..k.......9..... <3>[ 683.373404] Object 00000000b8392dd1: ff ff ff ff 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ....ZZZZZZZZZZZZ <3>[ 683.373418] Object 00000000e5c1bbcb: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZZZZZ <3>[ 683.373432] Object 00000000199feccd: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZZZZZ <3>[ 683.373446] Object 0000000020f5e08b: 20 df 6b fa 87 9f ff ff 20 df 6b fa 87 9f ff ff .k..... .k..... <3>[ 683.373460] Object 0000000090591b0f: 30 df 6b fa 87 9f ff ff 30 df 6b fa 87 9f ff ff 0.k.....0.k..... <3>[ 683.373473] Object 00000000232f7cd0: 40 df 6b fa 87 9f ff ff 40 df 6b fa 87 9f ff ff @.k.....@.k..... <3>[ 683.373487] Object 0000000060458027: 50 df 6b fa 87 9f ff ff 50 df 6b fa 87 9f ff ff P.k.....P.k..... <3>[ 683.373501] Object 00000000e3c82ce2: 06 00 00 00 00 00 00 00 5a 5a 5a 5a 5a 5a 5a 5a ........ZZZZZZZZ <3>[ 683.373515] Object 00000000ec804eb8: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZZZZZ <3>[ 683.373529] Object 00000000ce7ccc08: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZZZZZ <3>[ 683.373543] Object 000000002dbc575c: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZZZZZ <3>[ 683.373557] Object 00000000b86d3417: 5a 5a 5a 5a 5a 5a 5a 5a 00 de 6b fa 87 9f ff ff ZZZZZZZZ..k..... <3>[ 683.373571] Object 00000000d1e82276: b8 61 dd d9 87 9f ff ff a0 06 00 00 d0 06 00 00 .a.............. <3>[ 683.373585] Object 00000000cc53f969: e8 06 00 00 20 07 00 00 28 07 00 00 00 00 00 00 .... ...(....... <3>[ 683.373599] Object 00000000ea2426d2: 40 0c 8c 7b 88 9f ff ff 00 00 00 00 00 00 00 00 @..{............ <3>[ 683.373613] Object 00000000b860c1c3: 68 0d 8c 7b 88 9f ff ff 68 25 8c 7b 88 9f ff ff h..{....h%.{.... <3>[ 683.373627] Object 0000000016455ea0: 96 d5 05 00 01 00 00 00 00 5a 5a 5a 5a 5a 5a 5a .........ZZZZZZZ <3>[ 683.373640] Object 00000000e66ede82: 00 e0 6b fa 87 9f ff ff 00 e0 6b fa 87 9f ff ff ..k.......k..... <3>[ 683.373654] Object 0000000080964939: 10 e0 6b fa 87 9f ff ff 10 e0 6b fa 87 9f ff ff ..k.......k..... <3>[ 683.373668] Object 00000000e7ffc5dd: 00 00 00 00 00 00 00 00 00 01 00 00 00 00 ad de ................ <3>[ 683.373682] Object 000000000ce9d6ca: 00 02 00 00 00 00 ad de 5a 5a 5a 5a 5a 5a 5a 5a ........ZZZZZZZZ <3>[ 683.373696] Object 00000000386659d0: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZZZZZ <3>[ 683.373710] Redzone 0000000075d2069d: bb bb bb bb bb bb bb bb ........ <3>[ 683.373723] Padding 0000000054e14c6b: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZZZZZ <3>[ 683.373737] Padding 00000000425e5b34: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZZZZZ <3>[ 683.373751] Padding 00000000ad3d4db9: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZZZZZ <4>[ 683.373767] CPU: 1 PID: 151 Comm: kworker/1:2 Tainted: G BU 5.0.0-rc8-g39139489403b-drmtip_236+ #1 <4>[ 683.373769] Hardware name: Intel Corporation Ice Lake Client Platform/IceLake Y LPDDR4x T4 RVP TLC, BIOS ICLSFWR1.R00.3087.A00.1902250334 02/25/2019 <4>[ 683.373773] Workqueue: events delayed_fput <4>[ 683.373775] Call Trace: <4>[ 683.373777] <IRQ> <4>[ 683.373781] dump_stack+0x67/0x9b <4>[ 683.373783] free_debug_processing+0x344/0x370 <4>[ 683.373832] ? intel_engine_breadcrumbs_irq+0x2e4/0x380 [i915] <4>[ 683.373836] __slab_free+0x337/0x4f0 <4>[ 683.373840] ? _raw_spin_unlock_irqrestore+0x39/0x60 <4>[ 683.373844] ? debug_check_no_obj_freed+0x132/0x210 <4>[ 683.373889] ? intel_engine_breadcrumbs_irq+0x2e4/0x380 [i915] <4>[ 683.373892] ? kmem_cache_free+0x275/0x2e0 <4>[ 683.373894] kmem_cache_free+0x275/0x2e0 <4>[ 683.373939] intel_engine_breadcrumbs_irq+0x2e4/0x380 [i915] <4>[ 683.373984] gen8_cs_irq_handler+0x4e/0xa0 [i915] <4>[ 683.374026] gen11_irq_handler+0x24b/0x330 [i915] <4>[ 683.374032] __handle_irq_event_percpu+0x41/0x2d0 <4>[ 683.374034] ? handle_irq_event+0x27/0x50 <4>[ 683.374038] handle_irq_event_percpu+0x2b/0x70 <4>[ 683.374040] handle_irq_event+0x2f/0x50 <4>[ 683.374044] handle_edge_irq+0xe7/0x190 <4>[ 683.374048] handle_irq+0x67/0x160 <4>[ 683.374051] do_IRQ+0x5e/0x130 <4>[ 683.374054] common_interrupt+0xf/0xf Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109827 Fixes: 52c0fdb25c7c ("drm/i915: Replace global breadcrumbs with per-context interrupt tracking") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190304114113.371-1-chris@chris-wilson.co.uk
2019-03-04drm: fix spelling mistake "intead" -> "instead"Colin Ian King1-1/+1
There is a spelling mistake in a DRM_NOTE message. Fix this. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190217225554.17742-1-colin.king@canonical.com
2019-03-04drm: add __user attribute to ptr_to_compat()Ben Dooks1-3/+3
The ptr_to_compat() call takes a "void __user *", so cast the compat drm calls that use it to avoid the following warnings from sparse: drivers/gpu/drm/drm_ioc32.c:188:39: warning: incorrect type in argument 1 (different address spaces) drivers/gpu/drm/drm_ioc32.c:188:39: expected void [noderef] <asn:1>*uptr drivers/gpu/drm/drm_ioc32.c:188:39: got void *[addressable] [assigned] handle drivers/gpu/drm/drm_ioc32.c:529:41: warning: incorrect type in argument 1 (different address spaces) drivers/gpu/drm/drm_ioc32.c:529:41: expected void [noderef] <asn:1>*uptr drivers/gpu/drm/drm_ioc32.c:529:41: got void *[addressable] [assigned] handle Cc: stable@vger.kernel.org Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190301120046.26961-1-ben.dooks@codethink.co.uk
2019-03-04drm/tinydrm: Use drm_dev_enter/exit()Noralf Trønnes8-32/+139
This protects device resources from use after device removal. There are 3 ways for driver-device unbinding to happen: - The driver module is unloaded causing the driver to be unregistered. This can't happen as long as there are open file handles because a reference is taken on the module. - The device is removed (Device Tree overlay unloading). This can happen at any time. - The driver sysfs unbind file can be used to unbind the driver from the device. This can happen any time. v2: Since drm_atomic_helper_shutdown() has to be called after drm_dev_unplug() we don't want do block ->disable after unplug. Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190225144232.20761-8-noralf@tronnes.org
2019-03-04drm/tinydrm: Remove tinydrm_deviceNoralf Trønnes3-170/+3
No more users left so it can go alongside its helpers. Update the tinydrm docs description and remove todo entry. Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20190225144232.20761-7-noralf@tronnes.org
2019-03-04drm/tinydrm: Drop using tinydrm_deviceNoralf Trønnes7-95/+277
Use devm_drm_dev_init() and drop using tinydrm_device. v2: devm_drm_dev_register() was dropped so add driver release callbacks. Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190225144232.20761-6-noralf@tronnes.org
2019-03-04drm/tinydrm/repaper: Drop using tinydrm_deviceNoralf Trønnes1-23/+61
Use devm_drm_dev_init() and drop using tinydrm_device. v2: devm_drm_dev_register() was dropped so add a driver release callback. Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190225144232.20761-5-noralf@tronnes.org
2019-03-04drm/drv: DOC: Add driver example codeNoralf Trønnes1-0/+132
Add driver example that shows how devm_drm_dev_init() can be used. v2: Expand docs (Sam, Daniel) Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190225144232.20761-4-noralf@tronnes.org
2019-03-04drm: Add devm_drm_dev_init()Noralf Trønnes1-0/+39
This adds a resource managed (devres) version of drm_dev_init(). v2: Remove devm_drm_dev_register() since we can't touch hw in devm release functions and drivers want to disable hw on driver module unload (Daniel Vetter, Greg KH) Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Greg KH <gregkh@linuxfoundation.org> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190225144232.20761-3-noralf@tronnes.org
2019-03-04drm/drv: Hold ref on parent device during drm_device lifetimeNoralf Trønnes1-1/+4
This makes it safe to access drm_device->dev after the parent device has been removed/unplugged. Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190225144232.20761-2-noralf@tronnes.org
2019-03-04drm/i915/gvt: Add mutual lock for ppgtt mm LRU listZhenyu Wang2-1/+14
This adds mutex to guard against update of global ppgtt mm LRU list. To resolve error found as below warning. [73130.012162] ------------[ cut here ]------------ [73130.012168] list_add corruption. prev->next should be next (ffff995f970cca50), but was 0000000000000000. (prev=ffff995f0dc5bdf8). [73130.012181] WARNING: CPU: 3 PID: 82 at lib/list_debug.c:28 __list_add_valid+0x4d/0x70 [73130.012183] Modules linked in: btrfs(E) xor(E) zstd_decompress(E) zstd_compress(E) raid6_pq(E) dm_mod(E) kvmgt(E) fuse(E) xt_addrtype(E) nft_compat(E) xt_conntrack(E) nf_nat(E) nf_conntrack(E) nf_defrag_ipv6(E) nf_defrag_ipv4(E) libcrc32c(E) br_netfilter(E) bridge(E) stp(E) llc(E) overlay(E) devlink(E) nf_tables(E) nfnetlink(E) loop(E) x86_pkg_temp_thermal(E) intel_powerclamp(E) coretemp(E) crct10dif_pclmul(E) crc32_pclmul(E) ghash_clmulni_intel(E) mei_me(E) aesni_intel(E) aes_x86_64(E) crypto_simd(E) cryptd(E) glue_helper(E) intel_cstate(E) intel_uncore(E) mei(E) intel_pch_thermal(E) intel_rapl_perf(E) pcspkr(E) iTCO_wdt(E) iTCO_vendor_support(E) idma64(E) sg(E) virt_dma(E) acpi_pad(E) evdev(E) binfmt_misc(E) ip_tables(E) x_tables(E) ipv6(E) autofs4(E) hid_generic(E) usbhid(E) hid(E) ext4(E) crc32c_generic(E) crc16(E) mbcache(E) jbd2(E) fscrypto(E) xhci_pci(E) sdhci_pci(E) cqhci(E) intel_lpss_pci(E) intel_lpss(E) crc32c_intel(E) xhci_hcd(E) sdhci(E) i2c_i801(E) e1000e(E) mmc_core(E) [73130.012218] ptp(E) pps_core(E) usbcore(E) mfd_core(E) sd_mod(E) fan(E) thermal(E) [73130.012227] CPU: 3 PID: 82 Comm: gvt workload 0 Tainted: G W E 5.0.0-rc7-staging-190226+ #282 [73130.012228] Hardware name: /NUC6i5SYB, BIOS SYSKLi35.86A.0039.2016.0316.1747 03/16/2016 [73130.012232] RIP: 0010:__list_add_valid+0x4d/0x70 [73130.012234] Code: c3 48 89 d1 48 c7 c7 e0 82 91 bb 48 89 c2 e8 44 8a cc ff 0f 0b 31 c0 c3 48 89 c1 4c 89 c6 48 c7 c7 30 83 91 bb e8 2d 8a cc ff <0f> 0b 31 c0 c3 48 89 f2 4c 89 c1 48 89 fe 48 c7 c7 80 83 91 bb e8 [73130.012236] RSP: 0018:ffffa4924107fdd0 EFLAGS: 00010286 [73130.012238] RAX: 0000000000000000 RBX: ffff995d8a5ccf00 RCX: 0000000000000006 [73130.012240] RDX: 0000000000000007 RSI: 0000000000000086 RDI: ffff995faad96680 [73130.012241] RBP: 0000000000000000 R08: 0000000000213a28 R09: 0000000000000084 [73130.012243] R10: 0000000000000000 R11: ffffa4924107fc70 R12: ffff995d8a5ccf78 [73130.012245] R13: ffff995f970c8000 R14: ffff995f0dc5bdf8 R15: ffff995f970cca50 [73130.012247] FS: 0000000000000000(0000) GS:ffff995faad80000(0000) knlGS:0000000000000000 [73130.012249] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [73130.012250] CR2: 00000222e1891000 CR3: 0000000116848002 CR4: 00000000003626e0 [73130.012252] Call Trace: [73130.012258] intel_vgpu_pin_mm+0x7a/0xa0 [73130.012262] workload_thread+0x683/0x12a0 [73130.012266] ? do_wait_intr_irq+0xb0/0xb0 [73130.012269] ? finish_wait+0x80/0x80 [73130.012271] ? intel_vgpu_clean_workloads+0x110/0x110 [73130.012274] kthread+0x116/0x130 [73130.012276] ? kthread_bind+0x30/0x30 [73130.012280] ret_from_fork+0x35/0x40 [73130.012285] WARNING: CPU: 3 PID: 82 at lib/list_debug.c:28 __list_add_valid+0x4d/0x70 [73130.012286] ---[ end trace 458a2e792eec21c0 ]--- v2: - simplify lock handling Reviewed-by: Xiong Zhang <xiong.y.zhang@intel.com> Cc: Xiong Zhang <xiong.y.zhang@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2019-03-04drm/i915/gvt: Only assign ppgtt root at dispatch timeZhenyu Wang1-7/+9
This moves ppgtt root hook out of scan and shadow function, as it's only required at dispatch time. Also make sure this checks against shadow mm to be ready, otherwise bail to fail earlier. Reviewed-by: Xiong Zhang <xiong.y.zhang@intel.com> Cc: Xiong Zhang <xiong.y.zhang@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2019-03-04Merge v5.0 into drm-nextDave Airlie14-21/+63
There is a really hairy resolution involving amdgpu fixes, that I'd rather confirm here. Also some misc fixes are landed by me, but the pr has them as well. Signed-off-by: Dave Airlie <airlied@redhat.com>
2019-03-01drm/i915: extract AUX mask assignment to separate functionLucas De Marchi1-14/+20
No change in behavior, this only allows to more easily follow the flow of gen8_de_irq_handler without the mask assignments for each platform. This also re-organizes the branches a little bit, so the one-off case for CNL_WITH_PORT_F is separate from the generic gen >= 11. v2: rename de_port_iir_aux_mask -> gen8_de_port_aux_mask (Ville) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Jose Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190226004900.26047-1-lucas.demarchi@intel.com
2019-03-01drm/i915/icl: move MG pll hw_state readoutLucas De Marchi1-45/+71
Let the MG plls have their own hooks since it shares very little with other PLL types. It's also better so the platform info contains the info if the PLL is for MG PHY rather than relying on the PLL ids. Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190222232324.16405-1-lucas.demarchi@intel.com
2019-03-01drm/i915: Re-arrange execbuf so context is known before engineTvrtko Ursulin1-4/+7
Needed for a following patch. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190301140404.26690-23-chris@chris-wilson.co.uk Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2019-03-01drm/i915: Prioritise non-busywait semaphore workloadsChris Wilson4-4/+29
We don't want to busywait on the GPU if we have other work to do. If we give non-busywaiting workloads higher (initial) priority than workloads that require a busywait, we will prioritise work that is ready to run immediately. We then also have to be careful that we don't give earlier semaphores an accidental boost because later work doesn't wait on other rings, hence we keep a history of semaphore usage of the dependency chain. v2: Stop rolling the bits into a chain and just use a flag in case this request or any of our dependencies use a semaphore. The rolling around was contagious as Tvrtko was heard to fall off his chair. Testcase: igt/gem_exec_schedule/semaphore Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190301170901.8340-4-chris@chris-wilson.co.uk
2019-03-01drm/i915: Use HW semaphores for inter-engine synchronisation on gen8+Chris Wilson9-11/+180
Having introduced per-context seqno, we now have a means to identity progress across the system without feel of rollback as befell the global_seqno. That is we can program a MI_SEMAPHORE_WAIT operation in advance of submission safe in the knowledge that our target seqno and address is stable. However, since we are telling the GPU to busy-spin on the target address until it matches the signaling seqno, we only want to do so when we are sure that busy-spin will be completed quickly. To achieve this we only submit the request to HW once the signaler is itself executing (modulo preemption causing us to wait longer), and we only do so for default and above priority requests (so that idle priority tasks never themselves hog the GPU waiting for others). As might be reasonably expected, HW semaphores excel in inter-engine synchronisation microbenchmarks (where the 3x reduced latency / increased throughput more than offset the power cost of spinning on a second ring) and have significant improvement (can be up to ~10%, most see no change) for single clients that utilize multiple engines (typically media players and transcoders), without regressing multiple clients that can saturate the system or changing the power envelope dramatically. v3: Drop the older NEQ branch, now we pin the signaler's HWSP anyway. v4: Tell the world and include it as part of scheduler caps. Testcase: igt/gem_exec_whisper Testcase: igt/benchmarks/gem_wsim Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190301170901.8340-3-chris@chris-wilson.co.uk
2019-03-01drm/i915: Keep timeline HWSP allocated until idle across the systemChris Wilson5-39/+420
In preparation for enabling HW semaphores, we need to keep in flight timeline HWSP alive until its use across entire system has completed, as any other timeline active on the GPU may still refer back to the already retired timeline. We both have to delay recycling available cachelines and unpinning old HWSP until the next idle point. An easy option would be to simply keep all used HWSP until the system as a whole was idle, i.e. we could release them all at once on parking. However, on a busy system, we may never see a global idle point, essentially meaning the resource will be leaked until we are forced to do a GC pass. We already employ a fine-grained idle detection mechanism for vma, which we can reuse here so that each cacheline can be freed immediately after the last request using it is retired. v3: Keep track of the activity of each cacheline. v4: cacheline_free() on canceling the seqno tracking v5: Finally with a testcase to exercise wraparound v6: Pack cacheline into empty bits of page-aligned vaddr v7: Use i915_utils to hide the pointer casting around bit manipulation Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190301170901.8340-2-chris@chris-wilson.co.uk
2019-03-01drm/i915/execlists: Suppress redundant preemptionChris Wilson1-4/+40
On unwinding the active request we give it a small (limited to internal priority levels) boost to prevent it from being gazumped a second time. However, this means that it can be promoted to above the request that triggered the preemption request, causing a preempt-to-idle cycle for no change. We can avoid this if we take the boost into account when checking if the preemption request is valid. v2: After preemption the active request will be after the preemptee if they end up with equal priority. v3: Tvrtko pointed out that this, the existing logic, makes I915_PRIORITY_WAIT non-preemptible. Document this interesting quirk! v4: Prove Tvrtko was right about WAIT being non-preemptible and test it. v5: Except not all priorities were made equal, and the WAIT not preempting is only if we start off as !NEWCLIENT. v6: More commentary after coming to an understanding about what I had forgotten to say. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190301170901.8340-1-chris@chris-wilson.co.uk
2019-03-01drm/i915/selftests: Check that whitelisted registers are accessibleChris Wilson1-1/+377
There is no point in whitelisting a register that the user then cannot write to, so check the register exists before merging such patches. v2: Mark SLICE_COMMON_ECO_CHICKEN1 [731c] as write-only v3: Use different variables for different meanings! Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Dale B Stimson <dale.b.stimson@intel.com> Cc: Michał Winiarski <michal.winiarski@intel.com> Reviewed-by: Michał Winiarski <michal.winiarski@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190301140404.26690-6-chris@chris-wilson.co.uk Link: https://patchwork.freedesktop.org/patch/msgid/20190301160108.19039-1-chris@chris-wilson.co.uk
2019-03-01drm/i915: Finalize Wa_1408961008:iclVille Syrjälä1-2/+6
The icl wm1+ underrun w/a has been added to the spec. It changed slightly from the previous incarnation by requiring that we mirror the lines watermark and the ignore lines bit from WM0 into WM1. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190228173639.18422-1-ville.syrjala@linux.intel.com Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Tested-by: Clint Taylor <Clinton.A.Taylor@intel.com>
2019-03-01drm/i915: Introduce i915_timeline.mutexChris Wilson5-4/+10
A simple mutex used for guarding the flow of requests in and out of the timeline. In the short-term, it will be used only to guard the addition of requests into the timeline, taken on alloc and released on commit so that only one caller can construct a request into the timeline (important as the seqno and ring pointers must be serialised). This will be used by observers to ensure that the seqno/hwsp is stable. Later, when we have reduced retiring to only operate on a single timeline at a time, we can then use the mutex as the sole guard required for retiring. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190301110547.14758-2-chris@chris-wilson.co.uk
2019-03-01drm/sun4i: Improve VI scaling for DE2/DE3Jernej Skrabec2-3/+62
VI planes support coarse scaling which helps to overcome VI scaler limitations. While exact working of coarse scaling isn't known, it seems that it just skips programmed amount of rows and columns. This is especially useful for downscaling very big planes (4K down to 1080p). Horizontal coarse scaling is currently used to fit one line to VI scaler buffer. Vertical coarse scaling is used to assure that VI scaler is actually capable of processing framebuffer in one frame time. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190228200329.11128-4-jernej.skrabec@siol.net
2019-03-01drm/sun4i: Add VI scaler line size quirk for DE2/DE3Jernej Skrabec2-0/+11
While all RGB scalers have maximum line size of 2048, some YUV scalers have maximum line size of 2048 and some have line size of 4096. Since there is no rule for that, add a quirk. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190228200329.11128-3-jernej.skrabec@siol.net
2019-03-01drm/i915/gvt: Don't submit request for error workload dispatchZhenyu Wang1-0/+9
As vGPU shadow ctx is loaded with guest context state, arbitrarily submitting request in error workload dispatch path would cause trouble. So don't try to submit in error path now like in previous code. This is to fix VM failure when GPU hang happens. Fixes: f0e994372518 ("drm/i915/gvt: Fix workload request allocation before request add") Reviewed-by: Xiong Zhang <xiong.y.zhang@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2019-03-01drm/i915/gvt: stop scheduling workload when vgpu is inactiveWeinan Li1-1/+2
There is one corner case that workload_thread may pick and dispatch one workload of vgpu after it's already deactivated. Below is the scenario: 1. deactive_vgpu got the vgpu_lock, it found pending workload was submitted, then it released the vgpu_lock and wait for vgpu idle. 2. before deactive_vgpu got the vgpu_lock back, workload_thread might pick one new valid workload, then it was blocked by the vgpu_lock. 3. deactive_vgpu got the vgpu_lock again, finished the last processes of deactivating, then release the vgpu_lock. 4. workload_thread got the vgpu_lock, then it will try to dispatch the fetched workload. It's not expected one workload of deactivated vgpu is dispatched. The solution is to add condition check of the vgpu's active flag and stop to schedule when it's inactive. Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Weinan Li <weinan.z.li@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2019-03-01drm: panel-orientation-quirks: Add quirk for Lenovo Ideapad D330David Santamaría Rogado1-0/+13
Lenovo Ideapad D330 Pentium CPU version has 1920x1200 LCD. Console output gets rotated at boot as Miix 310. Signed-off-by: David Santamaría Rogado <howl.nsp@gmail.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190223211928.9899-1-howl.nsp@gmail.com
2019-02-28drm/i915/execlists: Suppress mere WAIT preemptionChris Wilson6-3/+189
WAIT is occasionally suppressed by virtue of preempted requests being promoted to NEWCLIENT if they have not all ready received that boost. Make this consistent for all WAIT boosts that they are not allowed to preempt executing contexts and are merely granted the right to be at the front of the queue for the next execution slot. This is in keeping with the desire that the WAIT boost be a minor tweak that does not give excessive promotion to its user and open ourselves to trivial abuse. The problem with the inconsistent WAIT preemption becomes more apparent as the preemption is propagated across the engines, where one engine may preempt and the other not, and we be relying on the exact execution order being consistent across engines (e.g. using HW semaphores to coordinate parallel execution). v2: Also protect GuC submission from false preemption loops. v3: Build bug safeguards and better debug messages for st. v4: Do the priority bumping in unsubmit (i.e. on preemption/reset unwind), applying it earlier during submit causes out-of-order execution combined with execute fences. v5: Call sw_fence_fini for our dummy request (Matthew) Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190228220639.3173-1-chris@chris-wilson.co.uk
2019-02-28Merge tag 'asoc-v5.1-2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-nextTakashi Iwai54-375/+538
ASoC: More changes for v5.1 Another batch of changes for ASoC, no big core changes - it's mainly small fixes and improvements for individual drivers. - A big refresh and cleanup of the Samsung drivers, fixing a number of issues which allow the driver to be used with a wider range of userspaces. - Fixes for the Intel drivers to make them more standard so less likely to get bitten by core issues. - New driver for Cirrus Logic CS35L26.
2019-02-28Merge tag 'topic/mei-hdcp-2019-02-26' of git://anongit.freedesktop.org/drm/drm-intel into char-misc-nextGreg Kroah-Hartman2-16/+4
Daniel writes: mei-hdcp driver mei driver for the me hdcp client, for use by drm/i915. Including the following prep work: - whitelist hdcp client in mei bus - merge to include char-misc-next - drm/i915 side of the mei_hdcp/i915 component interface - component prep work (including one patch touching i915&snd-hda) * tag 'topic/mei-hdcp-2019-02-26' of git://anongit.freedesktop.org/drm/drm-intel: (23 commits) misc/mei/hdcp: Component framework for I915 Interface misc/mei/hdcp: Closing wired HDCP2.2 Tx Session misc/mei/hdcp: Enabling the HDCP authentication misc/mei/hdcp: Verify M_prime misc/mei/hdcp: Repeater topology verification and ack misc/mei/hdcp: Prepare Session Key misc/mei/hdcp: Verify L_prime misc/mei/hdcp: Initiate Locality check misc/mei/hdcp: Store the HDCP Pairing info misc/mei/hdcp: Verify H_prime misc/mei/hdcp: Verify Receiver Cert and prepare km misc/mei/hdcp: Initiate Wired HDCP2.2 Tx Session misc/mei/hdcp: Define ME FW interface for HDCP2.2 misc/mei/hdcp: Client driver for HDCP application mei: bus: whitelist hdcp client drm/audio: declaration of struct device drm: helper functions for hdcp2 seq_num to from u32 drm/i915: MEI interface definition drm/i915: header for i915 - MEI_HDCP interface drm/i915: enum port definition is moved into i915_drm.h ...
2019-02-28drm/i915: Use __ffs() in for_each_priolist for more compact codeChris Wilson1-2/+4
Gcc has a slight preference if we use __ffs() to subtract one from the index once rather than each use: __execlists_submission_tasklet 2867 2847 -20 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190226102404.29153-11-chris@chris-wilson.co.uk
2019-02-28drm/i915: Remove second level open-coded rcu workChris Wilson3-94/+6
We currently use a worker queued from an rcu callback to determine when a how grace period has elapsed while we remained idle. We use this idle delay to infer that we will be idle for a while and this is a suitable point at which we can trim our global memory caches. Since we wrote that, this mechanism now exists as rcu_work, and having converted the idle shrinkers over to using that, we can remove our own variant. v2: Say goodbye to gt.epoch as well. v3: Remove the misplaced and redundant comment before parking globals Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190228102035.5857-3-chris@chris-wilson.co.uk
2019-02-28drm/i915: Make object/vma allocation caches globalChris Wilson20-86/+170
As our allocations are not device specific, we can move our slab caches to a global scope. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190228102035.5857-2-chris@chris-wilson.co.uk
2019-02-28drm/i915: Make request allocation caches globalChris Wilson19-149/+312
As kmem_caches share the same properties (size, allocation/free behaviour) for all potential devices, we can use global caches. While this potential has worse fragmentation behaviour (one can argue that different devices would have different activity lifetimes, but you can also argue that activity is temporal across the system) it is the default behaviour of the system at large to amalgamate matching caches. The benefit for us is much reduced pointer dancing along the frequent allocation paths. v2: Defer shrinking until after a global grace period for futureproofing multiple consumers of the slab caches, similar to the current strategy for avoiding shrinking too early. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190228102035.5857-1-chris@chris-wilson.co.uk
2019-02-28drm/i915: Report engines are idle if already parkedChris Wilson1-3/+7
If we have parked, then we must have passed an idleness test and still be idle. We chose not to use this shortcut in the past so that we could use the idleness test at any time and inspect HW. However, some HW like Sandybridge, doesn't like being woken up frivolously, so avoid doing so. References: 0b702dca2658 ("drm/i915: Avoid waking the engines just to check if they are idle") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190227214159.7946-1-chris@chris-wilson.co.uk
2019-02-28Revert "drm/i915: Avoid waking the engines just to check if they are idle"Chris Wilson1-11/+6
This reverts commit 0b702dca26580e3bbfbbaf22dfc29280b6263414. CI reports that this is not as reliable as it first appears, with failures starting to sporadically occur in selftests. Fixes: 0b702dca2658 ("drm/i915: Avoid waking the engines just to check if they are idle") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190227204654.14907-1-chris@chris-wilson.co.uk
2019-02-28drm/i915: Compute the global scheduler capsChris Wilson4-6/+43
Do a pass over all the engines upon starting to determine the global scheduler capability flags (those that are agreed upon by all). Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190226102404.29153-7-chris@chris-wilson.co.uk
2019-02-28drm/bochs: Drop best_encoderDaniel Vetter1-11/+0
This is the default for atomic drivers. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20190221155857.19773-2-daniel.vetter@ffwll.ch Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: virtualization@lists.linux-foundation.org Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.