aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/gpu
AgeCommit message (Collapse)AuthorFilesLines
2019-02-22drm/i915: Sort ctx workarounds init from newer to older platforms.Rodrigo Vivi1-18/+18
No functional change. Just a reorg to match the preferred behavior. Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190221231452.21672-1-rodrigo.vivi@intel.com
2019-02-22drm/i915/guc: Flush the residual log capture irq on disablingChris Wilson1-0/+5
As we disable the log capture events, flush any residual interrupt before we flush and disable the worker. v2: Mika pointed out that it wasn't the worker re-queueing itself, but a rogue irq. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109716 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190221163833.21393-1-chris@chris-wilson.co.uk
2019-02-22drm/imx: only send commit done event when all state has been appliedLucas Stach1-2/+28
Currently there is a small race window where we could manage to arm the vblank event from atomic flush, but programming the hardware was too close to the frame end, so the hardware will only apply the current state on the next vblank. In this case we will send out the commit done event too early causing userspace to reuse framebuffes that are still in use. Instead of using the event arming mechnism, just remember the pending event and send it from the vblank IRQ handler, once we are sure that all state has been applied successfully. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> [p.zabel@pengutronix.de: inverted logic: done -> pending, added back spinlock in atomic_flush, commit message typo fix] Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-02-22drm/imx: allow building under COMPILE_TESTPhilipp Zabel1-1/+1
Allow to compile-test imx-drm on other platforms. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2019-02-22drm/imx: imx-tve: depend on COMMON_CLKPhilipp Zabel1-0/+1
Since the TVE provides a clock to the DI, the driver can only be compiled if the common clock framework is enabled. With the COMMON_CLK dependency in place, it will be possible to allow building the other parts of imx-drm under COMPILE_TEST on architectures that do not select the common clock framework. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2019-02-22drm/imx: ipuv3-plane: add zpos propertyPhilipp Zabel2-30/+33
Add a zpos property to planes. Call drm_atomic_helper_check() instead of calling drm_atomic_helper_check_modeset() and drm_atomic_check_planes() manually. This effectively adds a call to drm_atomic_normalize_zpos() before checking planes. Reorder atomic update to allow changing plane zpos without modeset. Note that the initial zpos is set in ipu_plane_state_reset(). The initial value set in ipu_plane_init() is just for show. The zpos parameter of drm_plane_create_zpos_property() is ignored because the newly created plane do not have state yet. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Tested-by: Marius Vlad <marius.vlad@collabora.com>
2019-02-22drm/imx: ipuv3-plane: add function to query atomic update statusLucas Stach2-0/+22
This function allows upper layer to check if a requested atomic update to the plane has been applied or is still pending. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> [p.zabel@pengutronix.de: inverted logic: done -> pending] Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-02-22gpu: ipu-v3: prg: add function to get channel configure statusLucas Stach1-0/+16
This allows channels using the PRG to check if a requested configuration update has been applied or is still pending. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> [p.zabel@pengutronix.de: inverted logic: done -> pending] Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-02-22gpu: ipu-v3: pre: add double buffer status readbackLucas Stach2-0/+7
This allows the upper layers to check if a double buffer update has been applied by the PRE or is still pending. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> [p.zabel@pengutronix.de: inverted logic: done -> pending] Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-02-22drm/i915/gvt: Add in context mmio 0x20D8 to gen9 mmio listColin Xu1-0/+1
Depends on GEN family and I915_PARAM_HAS_CONTEXT_ISOLATION, Mesa driver will decide whether constant buffer 0 address is relative or absolute, and load GPU initial state by lri to context mmio INSTPM (GEN8) or 0x20D8 (>=GEN9). Mesa Commit fa8a764b62 ("i965: Use absolute addressing for constant buffer 0 on Kernel 4.16+.") INSTPM is already added to gen8_engine_mmio_list, but 0x20D8 is missed in gen9_engine_mmio_list. From GVT point of view, different guest could have different context so should switch those mmio accordingly. v2: Update fixes commit ID. Fixes: 178657139307 ("drm/i915/gvt: vGPU context switch") Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Colin Xu <colin.xu@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2019-02-22Merge branch 'drm-next-5.1' of git://people.freedesktop.org/~agd5f/linux into drm-nextDave Airlie59-610/+698
Fixes for 5.1: amdgpu: - Fix missing fw declaration after dropping old CI DPM code - Fix debugfs access to registers beyond the MMIO bar size - Fix context priority handling - Add missing license on some new files - Various cleanups and bug fixes radeon: - Fix missing break in CS parser for evergreen - Various cleanups and bug fixes sched: - Fix entities with 0 run queues Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190221214134.3308-1-alexander.deucher@amd.com
2019-02-22Merge branch 'drm-fixes-5.0' of git://people.freedesktop.org/~agd5f/linux into drm-fixesDave Airlie10-13/+40
A bit bigger than normal for this week due to fixes for some long standing display issues that are bound for stable. These changes would be going to stable anyway, so I figured it was better via 5.0 than 5.1. - Several display fixes - Fix PX systems due to core changes in runtime pm - Disable bulk moves. They are fixed in 5.1, but fix is too invasive for 5.0 Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190220225715.3240-1-alexander.deucher@amd.com
2019-02-21drm/amdgpu: Bump amdgpu version for context priority override.Bas Nieuwenhuizen1-1/+2
Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-02-21drm/amdgpu/powerplay: fix typo in BACO header guardsAlex Deucher2-4/+4
s/BOCO/BACO/g Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-02-21drm/amdgpu/powerplay: fix return codes in BACO codeAlex Deucher2-5/+5
Use a proper return code rather than -1. Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-02-21drm/amdgpu: add missing license on baco filesAlex Deucher2-0/+44
Trivial. Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-02-21drm/i915: remove redundant likely/unlikely annotationChengguang Xu3-4/+4
unlikely has already included in IS_ERR(), so just remove redundant likely/unlikely annotation. Signed-off-by: Chengguang Xu <cgxu519@gmx.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190221020819.21832-1-cgxu519@gmx.com
2019-02-21drm/i915: Reorder struct_mutex-vs-reset_lock in i915_gem_fault()Chris Wilson1-10/+10
Annoyingly, struct_mutex was not entirely eliminated from the reset pathway; for reasons of its own, intel_display_resume() requires struct_mutex to prepare the planes it already captured. To avoid the immediate problem of a deadlock between the struct_mutex and the reset srcu, we have to acquire the reset_lock before struct_mutex in i915_gem_fault(). Now any wait underneath struct_mutex will result us in having to forcibly reset all inflight rendering, less than ideal, but better than a deadlock (and will do for the short term). Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190221102924.13442-1-chris@chris-wilson.co.uk
2019-02-21drm/i915/icl: Drop redundant gamma mode maskUma Shankar2-3/+1
gamma mode mask was not considering the 30th and 31st bits. Due to this state readout was masking these bits, causing a mismatch and false warning, even though the registers were updated correctly. Dropped the gamma mode mask as it is redundant and ideally entire register content should be matching. This resolves the state mismatch warnings. Signed-off-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1550689519-6977-1-git-send-email-uma.shankar@intel.com Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109624
2019-02-21drm/qxl: remove set but not used variable 'bo_old'YueHaibing1-7/+1
Fixes gcc '-Wunused-but-set-variable' warning: drivers/gpu/drm/qxl/qxl_display.c: In function 'qxl_primary_atomic_update': drivers/gpu/drm/qxl/qxl_display.c:538:17: warning: variable 'bo_old' set but not used [-Wunused-but-set-variable] It's not used any more after 4979904c62b9 ("drm/qxl: use shadow bo directly") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Link: http://patchwork.freedesktop.org/patch/msgid/20190218085459.196470-1-yuehaibing@huawei.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-02-21drm/bochs: Fix the ID mismatch errorAlistair Francis1-0/+4
When running RISC-V QEMU with the Bochs device attached via PCIe the probe of the Bochs device fails with: [drm:bochs_hw_init] *ERROR* ID mismatch This was introduced by this commit: 7780eb9ce8 bochs: convert to drm_dev_register To fix the error we ensure that pci_enable_device() is called before bochs_load(). Fixes: 7780eb9ce80f ("bochs: convert to drm_dev_register") Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reported-by: David Abdurachmanov <david.abdurachmanov@gmail.com> Link: http://patchwork.freedesktop.org/patch/msgid/20190221003231.31625-1-alistair.francis@wdc.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-02-21drm/fb-helper: generic: Don't take module ref for fbconNoralf Trønnes1-2/+4
It's now safe to let fbcon unbind automatically on fbdev unregister. The crash problem was fixed in commit 2122b40580dd ("fbdev: fbcon: Fix unregister crash when more than one framebuffer") Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20190210131039.52664-13-noralf@tronnes.org
2019-02-21drm/tinydrm: Trivia typo fixAndy Shevchenko1-1/+1
Fix adddress -> address typo. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190219181331.28326-1-andriy.shevchenko@linux.intel.com
2019-02-21drm/tinydrm/mipi-dbi: Add drm_to_mipi_dbi()Noralf Trønnes7-27/+14
Add a function to derive mipi_dbi from drm_device now that tinydrm_device is going away. Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190210131039.52664-8-noralf@tronnes.org
2019-02-21drm/tinydrm: Remove tinydrm_shutdown()Noralf Trønnes8-48/+24
It's just a wrapper around drm_atomic_helper_shutdown() now. Also store drm_device in the drvdata field, since that's what's used. Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190210131039.52664-7-noralf@tronnes.org
2019-02-21drm/tinydrm: tinydrm_display_pipe_init() don't use tinydrm_deviceNoralf Trønnes4-15/+15
Rework function signature so tinydrm_device can be avoided. Move definition to tinydrm-helpers.h so tinydrm.h can be deleted in a later patch. Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190210131039.52664-6-noralf@tronnes.org
2019-02-21drm/modes: Add DRM_SIMPLE_MODE()Noralf Trønnes7-10/+10
This adds a helper macro to specify modes that only contain info about resolution. v2: Actually set the width and height (Ilia Mirkin) Cc: Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190210131039.52664-5-noralf@tronnes.org
2019-02-21drm/drv: drm_dev_unplug(): Move out drm_dev_put() callNoralf Trønnes4-1/+3
This makes it possible to use drm_dev_unplug() with the upcoming devm_drm_dev_init() which will do drm_dev_put() in its release callback. Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: David (ChunMing) Zhou <David1.Zhou@amd.com> Cc: Dave Airlie <airlied@redhat.com> Cc: Sean Paul <sean@poorly.run> Cc: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Acked-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20190208140103.28919-3-noralf@tronnes.org
2019-02-21drm: Fix drm_release() and device unplugNoralf Trønnes2-9/+3
If userspace has open fd(s) when drm_dev_unplug() is run, it will result in drm_dev_unregister() being called twice. First in drm_dev_unplug() and then later in drm_release() through the call to drm_put_dev(). Since userspace already holds a ref on drm_device through the drm_minor, it's not necessary to add extra ref counting based on no open file handles. Instead just drm_dev_put() unconditionally in drm_dev_unplug(). We now have this: - Userpace holds a ref on drm_device as long as there's open fd(s) - The driver holds a ref on drm_device as long as it's bound to the struct device When both sides are done with drm_device, it is released. Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Sean Paul <sean@poorly.run> Link: https://patchwork.freedesktop.org/patch/msgid/20190208140103.28919-2-noralf@tronnes.org
2019-02-21drm/i915/hdcp: Silence compiler criticsChris Wilson1-5/+5
drivers/gpu/drm/i915/intel_hdcp.c:92 intel_hdcp2_capable() warn: inconsistent indenting drivers/gpu/drm/i915/intel_hdcp.c:786:5: error: no previous prototype for ‘intel_hdcp_check_link’ Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190221084833.19489-1-chris@chris-wilson.co.uk
2019-02-21drm/i915/gvt: Fix MI_FLUSH_DW parsing with correct index checkZhenyu Wang1-1/+1
When MI_FLUSH_DW post write hw status page in index mode, the index value is in dword step and turned into address offset in cmd dword1. As status page size is 4K, so can't exceed that. This fixed upper bound check in cmd parser code which incorrectly stopped VM for reason of invalid MI_FLUSH_DW write index. v2: - Fix upper bound as 4K page size because index value is address offset. Fixes: be1da7070aea ("drm/i915/gvt: vGPU command scanner") Cc: stable@vger.kernel.org # v4.10+ Cc: "Zhao, Yan Y" <yan.y.zhao@intel.com> Reviewed-by: Yan Zhao <yan.y.zhao@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2019-02-20drm/i915/guc: Calling guc_disable_communication in all suspend pathsSujaritha Sundaresan3-5/+21
This aim of this patch is to call guc_disable_communication in all suspend paths. The reason to introduce this is to resolve a bug that occurred due to suspend late not being called in the hibernate devices path. Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190220013927.9488-3-sujaritha.sundaresan@intel.com
2019-02-20drm/i915/guc: Splitting CT channel open/close functionsSujaritha Sundaresan3-27/+82
The aim of this patch is to allow enabling and disabling of CTB without requiring the mutex lock. v2: Phasing out ctch_is_enabled function and replacing it with ctch->enabled (Daniele) Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190220013927.9488-2-sujaritha.sundaresan@intel.com
2019-02-20drm/i915: Prevent user context creation while wedgedChris Wilson1-3/+7
Introduce a new ABI method for detecting a wedged driver by reporting -EIO from DRM_IOCTL_I915_GEM_CONTEXT_CREATE. This came up in considering how to handle context recovery from userspace. There we wish to create a new context after the original is banned (the clients opts into the no recovery after reset strategy) in order to rebuild the mesa context from scratch. In doing so, if the device was wedged and not the context banned, we would fall into a loop of permanently trying to recreate the context and never making forward progress. This patch would inform the client that we are no longer able to create a context, and the client would have no choice but to abort (or at least inform its callers about the lost device for anv). References: https://lists.freedesktop.org/archives/mesa-dev/2019-February/215469.html Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190220225556.28715-1-chris@chris-wilson.co.uk
2019-02-20drm/amdgpu: disable bulk moves for nowChristian König1-0/+2
The changes to fix those are two invasive for backporting. Just disable the feature in 4.20 and 5.0. Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Cc: <stable@vger.kernel.org> [4.20+] Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-02-20drm/amd/display: set clocks to 0 on suspend on dce80Bhawanpreet Lakha1-3/+16
[Why] When a dce80 asic was suspended, the clocks were not set to 0. Upon resume, the new clock was compared to the existing clock, they were found to be the same, and so the clock was not set. This resulted in a blackscreen. [How] In atomic commit, check to see if there are any active pipes. If no, set clocks to 0 Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2019-02-20drm/amd/display: fix optimize_bandwidth func pointer for dce80Bhawanpreet Lakha2-1/+5
[Why] optimize_bandwidth was using dce100_prepare_bandwidth this is incorrect [How] change it to dce100_optimize_bandwidth Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2019-02-20drm/amd/display: Fix negative cursor pos programmingNicholas Kazlauskas1-2/+2
[Why] If the cursor pos passed from DM is less than the plane_state->dst_rect top left corner then the unsigned cursor pos wraps around to a large positive number since cursor pos is a u32. There was an attempt to guard against this in hubp1_cursor_set_position by checking the src_x_offset and src_y_offset and offseting the cursor hotspot within hubp1_cursor_set_position. However, the cursor position itself is still being programmed incorrectly as a large value. This manifests itself visually as the cursor disappearing or containing strange artifacts near the middle of the screen on raven. [How] Don't subtract the destination rect top left corner from the pos but add it to the hotspot instead. This happens before the pos gets passed into hubp1_cursor_set_position. This achieves the same result but avoids the subtraction wrap around. With this fix the original cursor programming logic can be used again. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Acked-by: Murton Liu <Murton.Liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-02-20drm/i915: Extend skl+ crc sources with more planesVille Syrjälä3-2/+87
On skl the crc registers were extended to provide plane crcs for up to 7 planes. Add the new crc sources. The current code uses the ivb+ register definitions for skl+ which does happen to work as the plane1, plane2, and dmux/pf bits happen the match what ivb+ had. So no bug in the current code. v2: Drop the unused set_wa parameter (DK) Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190214192219.3858-4-ville.syrjala@linux.intel.com Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2019-02-20drm/i915: Remove the broken DP CRC support for g4xVille Syrjälä1-69/+11
DP CRCs don't really work on g4x. If you want any CRCs on DP you must select the CRC source before the port is enabled, otherwise the CRC source select bits simply ignore any writes to them. And once the port is enabled we mustn't change the CRC source select until the port is disabled. That almost works, but not quite :( Eventually the CRC source select bits get permanently stuck one way or the other, and after that a reboot (or possibly a display reset) is needed to get working CRCs on that pipe (not matter which CRC source we try to use). Additionally the DFT scrambler reset bits we're trying to use don't seem to exist on g4x. There are some potentially relevant looking bits in the pipe registers, but when I tried it I got stable looking CRCs without setting any bits for this. If there is a way to make DP CRCs work reliably on g4x, I wasn't able to find it. So let's just remove the broken code we have. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190214192219.3858-3-ville.syrjala@linux.intel.com Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
2019-02-20drm/i915: Use named initializers for the crc source name arrayVille Syrjälä1-9/+9
We assume that the index of the string in the crc source names array matches the enum value for the crc source. Let's use named initializers to make sure that is indeed the case even if someone rearranges either the enum or the array. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190214192219.3858-2-ville.syrjala@linux.intel.com Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2019-02-20drm/i915: Remove the "pf" crc sourceVille Syrjälä2-5/+2
The "pipe" and "pf" crc sources are in fact the same thing. Remove the "pf" one. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190214192219.3858-1-ville.syrjala@linux.intel.com Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2019-02-20drm/i915: Reduce the RPS shockChris Wilson1-0/+12
Limit deboosting and boosting to keep ourselves at the extremes when in the respective power modes (i.e. slowly decrease frequencies while in the HIGH_POWER zone and slowly increase frequencies while in the LOW_POWER zone). On idle, we will hit the timeout and drop to the next level quickly, and conversely if busy we expect to hit a waitboost and rapidly switch into max power. This should improve the UX experience by keeping the GPU clocks higher than they ostensibly should be (based on simple busyness) by switching into the INTERACTIVE mode (due to waiting for pageflips) and increasing clocks via waitboosting. This will incur some additional power, our saving grace should be rc6 and powergating to keep the extra current draw in check. Food for future thought would be deadline scheduling? If we know certain contexts (high priority compositors) absolutely must hit the next vblank then we can raise the frequencies ahead of time. Part of this is covered by per-context frequencies, where userspace is given control over the frequency range they want the GPU to execute at (for largely the same problem as this, where the workload is very latency sensitive but at the EI level appears mostly idle). Indeed, the per-context series does extend the modeset boosting to include a frequency range tweak which seems applicable to solving this jittery UX behaviour. Reported-by: Lyude Paul <lyude@redhat.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109408 References: 0d55babc8392 ("drm/i915: Drop stray clearing of rps->last_adj") References: 60548c554be2 ("drm/i915: Interactive RPS mode") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Lyude Paul <lyude@redhat.com> Cc: Eero Tamminen <eero.t.tamminen@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Michel Thierry <michel.thierry@intel.com> Quoting Lyude Paul: > Before reverting 0d55babc8392754352f1058866dd4182ae587d11: [4.20] > > 35 measurements [of gnome-shell animations] > Average: 33.65657142857143 FPS > FPS observed: 20.8 - 46.87 FPS > Percentage under 60 FPS: 100.0% > Percentage under 55 FPS: 100.0% > Percentage under 50 FPS: 100.0% > Percentage under 45 FPS: 97.14285714285714% > Percentage under 40 FPS: 97.14285714285714% > Percentage under 35 FPS: 45.714285714285715% > Percentage under 30 FPS: 11.428571428571429% > Percentage under 25 FPS: 2.857142857142857% > > After reverting: [4.19 behaviour] > > 30 measurements > Average: 49.833666666666666 FPS > FPS observed: 33.85 - 60.0 FPS > Percentage under 60 FPS: 86.66666666666667% > Percentage under 55 FPS: 70.0% > Percentage under 50 FPS: 53.333333333333336% > Percentage under 45 FPS: 20.0% > Percentage under 40 FPS: 6.666666666666667% > Percentage under 35 FPS: 6.666666666666667% > Percentage under 30 FPS: 0% > Percentage under 25 FPS: 0% > > Patched: > 42 measurements > Average: 46.05428571428571 FPS > FPS observed: 1.82 - 59.98 FPS > Percentage under 60 FPS: 88.09523809523809% > Percentage under 55 FPS: 61.904761904761905% > Percentage under 50 FPS: 45.23809523809524% > Percentage under 45 FPS: 35.714285714285715% > Percentage under 40 FPS: 33.33333333333333% > Percentage under 35 FPS: 19.047619047619047% > Percentage under 30 FPS: 7.142857142857142% > Percentage under 25 FPS: 4.761904761904762% Tested-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190219122215.8941-13-chris@chris-wilson.co.uk
2019-02-20Pull in char-misc-next from GregDaniel Vetter22-110/+198
We need 32ea33a04484 ("mei: bus: export to_mei_cl_device for mei client devices drivers") for the mei-hdcp patches. References: https://lkml.org/lkml/2019/2/19/356 Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2019-02-20drm/i915: Fix KBL HDCP2.2 encrypt status signallingRamalingam C1-0/+42
HDCP transmitter is supposed to indicate the HDCP encryption status of the link through enc_en signals in a window of time called "window of opportunity" defined by HDCP HDMI spec. But on KBL this timing of signalling has an issue. To fix the issue this WA of resetting the signalling is required. v2: WA is moved into the toggle_signalling [Daniel] v3: Commit msg is rewritten with more information v4: Reviewed-by Daniel. Signed-off-by: Ramalingam C <ramalingam.c@intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1550338640-17470-17-git-send-email-ramalingam.c@intel.com
2019-02-20drm/i915: CP_IRQ handling for DP HDCP2.2 msgsRamalingam C3-15/+35
Implements the Waitqueue is created to wait for CP_IRQ Signaling the CP_IRQ arrival through atomic variable. For applicable DP HDCP2.2 msgs read wait for CP_IRQ. As per HDCP2.2 spec "HDCP Transmitters must process CP_IRQ interrupts when they are received from HDCP Receivers" Without CP_IRQ processing, DP HDCP2.2 H_Prime msg was getting corrupted while reading it based on corresponding status bit. This creates the random failures in reading the DP HDCP2.2 msgs. v2: CP_IRQ arrival is tracked based on the atomic val inc [daniel] Recording the reviewed-by Daniel from IRC. Signed-off-by: Ramalingam C <ramalingam.c@intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1550338640-17470-16-git-send-email-ramalingam.c@intel.com
2019-02-20drm/i915: Implement the HDCP2.2 support for HDMIRamalingam C1-0/+189
Implements the HDMI adaptation specific HDCP2.2 operations. Basically these are DDC read and write for authenticating through HDCP2.2 messages. v2: Rebased. v3: No more special handling of Gmbus burst read for AKE_SEND_CERT. Style fixed with few naming. [Uma] %s/PARING/PAIRING v4: msg_sz is initialized at definition. Lookup table is defined for HDMI HDCP2.2 msgs [Daniel]. v5: Rebased. v6: Make a function as inline [Uma] %s/uintxx_t/uxx v7: Errors due to sinks are reported as DEBUG logs. Adjust to the new mei interface. v8: ARRAY_SIZE for the # of array members [Jon & Daniel]. hdcp adaptation is added as a const in the hdcp_shim [Daniel] Signed-off-by: Ramalingam C <ramalingam.c@intel.com> Reviewed-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1550338640-17470-15-git-send-email-ramalingam.c@intel.com
2019-02-20drm/i915: Implement the HDCP2.2 support for DPRamalingam C1-0/+333
Implements the DP adaptation specific HDCP2.2 functions. These functions perform the DPCD read and write for communicating the HDCP2.2 auth message back and forth. v2: wait for cp_irq is merged with this patch. Rebased. v3: wait_queue is used for wait for cp_irq [Chris Wilson] v4: Style fixed. %s/PARING/PAIRING Few style fixes [Uma] v5: Lookup table for DP HDCP2.2 msg details [Daniel]. Extra lines are removed. v6: Rebased. v7: Fixed some regression introduced at v5. [Ankit] Macro HDCP_2_2_RX_CAPS_VERSION_VAL is reused [Uma] Converted a function to inline [Uma] %s/uintxx_t/uxx v8: Error due to the sinks are reported as DEBUG logs. Adjust to the new mei interface. v9: ARRAY_SIZE for no of array members [Jon & Daniel] return of the wait_for_cp_irq is made as void [Daniel] Wait for HDCP2.2 msg is done based on polling the reg bit than CP_IRQ based. [Daniel] hdcp adaptation is added as a const in the hdcp_shim [Daniel] v10: config_stream_type is redefined [Daniel] DP Errata specific defines are moved into intel_dp.c. Signed-off-by: Ramalingam C <ramalingam.c@intel.com> Signed-off-by: Ankit K Nautiyal <ankit.k.nautiyal@intel.com> Reviewed-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1550338640-17470-14-git-send-email-ramalingam.c@intel.com
2019-02-20drm/i915: Handle HDCP2.2 downstream topology changeRamalingam C1-2/+18
When repeater notifies a downstream topology change, this patch reauthenticate the repeater alone without disabling the hdcp encryption. If that fails then complete reauthentication is executed. v2: Rebased. v3: Typo in commit msg is fixed [Uma] v4: Rebased as part of patch reordering. Minor style fixes. v5: Rebased. v6: Rebased. v7: Errors due to sinks are reported as DEBUG logs. Signed-off-by: Ramalingam C <ramalingam.c@intel.com> Reviewed-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1550338640-17470-12-git-send-email-ramalingam.c@intel.com
2019-02-20drm/i915: Implement HDCP2.2 link integrity checkRamalingam C2-5/+93
Implements the link integrity check once in 500mSec. Once encryption is enabled, an ongoing Link Integrity Check is performed by the HDCP Receiver to check that cipher synchronization is maintained between the HDCP Transmitter and the HDCP Receiver. On the detection of synchronization lost, the HDCP Receiver must assert the corresponding bits of the RxStatus register. The Transmitter polls the RxStatus register and it may initiate re-authentication. v2: Rebased. v3: enum check_link_response is used check the link status [Uma] v4: Rebased as part of patch reordering. v5: Required members of intel_hdcp is defined [Sean Paul] v6: hdcp2_check_link is cancelled at required places. v7: Rebased for the component i/f changes. Errors due to the sinks are reported as DEBUG logs. v8: hdcp_check_work is used for both hdcp1 and hdcp2 check_link [Daniel] hdcp2.2 encryption status check is put under WARN_ON [Daniel] drm_hdcp.h changes are moved into separate patch [Daniel] v9: enum check_link_status is defined at intel_drv.h [Daniel] Signed-off-by: Ramalingam C <ramalingam.c@intel.com> Reviewed-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1550338640-17470-11-git-send-email-ramalingam.c@intel.com
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.