aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/gpu
AgeCommit message (Collapse)AuthorFilesLines
2019-01-21drm/i915/dsi: Enable dithering for 6 bpc panelsHans de Goede1-0/+4
The display engine has 2 dithering enable bits which both need to be set for dithering to happen, 1 in the PIPECONF register which is taken care of by i9xx_set_pipeconf() and a second bit at the encoder level. The dsi code was not setting the encoder level dithering enable bit causing dithering to be disabled, this commit fixes this. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181201113148.23184-2-hdegoede@redhat.com
2019-01-21drm/i915/dsi: Fix pipe_bpp for handling for 6 bpc pixel-formatsHans de Goede3-35/+17
There are 3 problems with the dsi code's pipe_bpp handling for 6 bpc pixel-formats which this commit addresses: 1) It assumes that the pipe_bpp is the same as the bpp going over the dsi lanes. This assumption is not valid for MIPI_DSI_FMT_RGB666, where pipe_bpp should be 18 so that we do proper dithering but we actually send 24 bpp over the dsi lanes (MIPI_DSI_FMT_RGB666_PACKED sends 18 bpp). This assumption is enforced by an assert in *_dsi_get_pclk(). This assert triggers on the initial hw-state readback on BYT/CHT devices which use MIPI_DSI_FMT_RGB666, such as the Prowise PT301 tablet. PIPECONF is set to 6BPC / 18 bpp by the GOP, while mipi_dsi_pixel_format_to_bpp() returns 24. This commits switches the calculations in *_dsi_get_pclk() to use the bpp from mipi_dsi_pixel_format_to_bpp(intel_dsi->pixel_format) which returns the bpp going over the mipi lanes and drops the assert. 2) On BXT bxt_dsi_get_pipe_config() wrongly overrides the pipe_bpp which i9xx_get_pipe_config() reads from PIPECONF with the return value from mipi_dsi_pixel_format_to_bpp(). This avoids the assert from 1. but is wrong since the pipe is actually running at the value configured in PIPECONF. This commit drops the override of pipe_bpp from bxt_dsi_get_pipe_config(). 3) The dsi encoder's compute_config() never assigns a value to pipe_bpp, unlike most other encoders. Falling back on compute_baseline_pipe_bpp() which always picks 24. 24 is only correct for MIPI_DSI_FMT_RGB88 for the others we should use 18 bpp so that we correctly do 6bpc color dithering. This commit adds code to intel_dsi_compute_config() to properly set pipe_bpp based on intel_dsi->pixel_format. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181201113148.23184-1-hdegoede@redhat.com
2019-01-21drm/i915: Prevent use of global_seqno=0Chris Wilson1-1/+8
We are not allowed to assign rq->global_seqno=0 as it has a special meaning of "inactive" (not executing on HW). Fixes: 6faf5916e6be ("drm/i915: Remove HW semaphores for gen7 inter-engine synchronisation") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190119143024.26971-1-chris@chris-wilson.co.uk
2019-01-21drm/i915/intel_drv.h: switch to kernel typesJani Nikula1-48/+46
Mixed C99 and kernel types use is getting ugly. Prefer kernel types. sed -i 's/\buint\(8\|16\|32\|64\)_t\b/u\1/g' Minor checkpatch fixes sprinkled on top of the changed lines. Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190118120125.15484-8-jani.nikula@intel.com
2019-01-21drm/i915/i915_drv.h: switch to kernel typesJani Nikula1-79/+79
Mixed C99 and kernel types use is getting ugly. Prefer kernel types. sed -i 's/\buint\(8\|16\|32\|64\)_t\b/u\1/g' Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190118120125.15484-7-jani.nikula@intel.com
2019-01-21drm/i915/display: switch to kernel typesJani Nikula1-52/+52
Mixed C99 and kernel types use is getting ugly. Prefer kernel types. sed -i 's/\buint\(8\|16\|32\|64\)_t\b/u\1/g' Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190118120125.15484-6-jani.nikula@intel.com
2019-01-21drm/i915/csr: switch to kernel typesJani Nikula1-34/+34
Mixed C99 and kernel types use is getting ugly. Prefer kernel types. sed -i 's/\buint\(8\|16\|32\|64\)_t\b/u\1/g' Minor checkpatch/whitepace fixes sprinkled on top of the changed lines. v2: more whitespace fixes (Ville, José) Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190118120125.15484-5-jani.nikula@intel.com
2019-01-21drm/i915/ddi: switch to kernel typesJani Nikula1-26/+26
Mixed C99 and kernel types use is getting ugly. Prefer kernel types. sed -i 's/\buint\(8\|16\|32\|64\)_t\b/u\1/g' Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190118120125.15484-4-jani.nikula@intel.com
2019-01-21drm/i915/pm: switch to kernel typesJani Nikula1-108/+105
Mixed C99 and kernel types use is getting ugly. Prefer kernel types. sed -i 's/\buint\(8\|16\|32\|64\)_t\b/u\1/g' Minor checkpatch fixes sprinkled on top of the changed lines. Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190118120125.15484-3-jani.nikula@intel.com
2019-01-21drm/i915/color: switch to kernel typesJani Nikula1-20/+20
Mixed C99 and kernel types use is getting ugly. Prefer kernel types. sed -i 's/\buint\(8\|16\|32\|64\)_t\b/u\1/g' Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190118120125.15484-2-jani.nikula@intel.com
2019-01-21drm/stm: ltdc: remove set but not used variable 'src_h'YueHaibing1-3/+1
Fixes gcc '-Wunused-but-set-variable' warning: drivers/gpu/drm/stm/ltdc.c: In function 'ltdc_plane_atomic_check': drivers/gpu/drm/stm/ltdc.c:694:13: warning: variable 'src_y' set but not used [-Wunused-but-set-variable] u32 src_x, src_y, src_w, src_h; ^ ^ drivers/gpu/drm/stm/ltdc.c:694:6: warning: variable 'src_x' set but not used [-Wunused-but-set-variable] u32 src_x, src_y, src_w, src_h; ^ Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/1538131180-34108-1-git-send-email-yuehaibing@huawei.com
2019-01-18drm/i915/selftests: Allocate mock ring/timeline per contextChris Wilson1-43/+47
To correctly simulate preemption between contexts, we need independent timelines along each context. Make it so. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190118190805.11792-1-chris@chris-wilson.co.uk
2019-01-18drm/sun4i: frontend: Hook-in support for the A20Paul Kocialkowski1-0/+4
This adds the appropriate device-tree compatible for hooking frontend support for the A20. Since the hardware is very similar to the A10, it shares the same quirks (which were already introduced). Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190118145133.21281-24-paul.kocialkowski@bootlin.com
2019-01-18drm/sun4i: frontend: Hook-in support for the A10, with specific quirksPaul Kocialkowski1-0/+18
This adds the appropriate device-tree compatible and quirk data for hooking frontend support for the A20. It supports the FIR coefficients ready bit but not the access control bit. It also takes different phase values than the A33 for these coefficients. The compatible is already used in the A10 device-tree and already documented in the device-tree bindings. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190118145133.21281-23-paul.kocialkowski@bootlin.com
2019-01-18drm/sun4i: frontend: Move the FIR filter phases to our quirksMaxime Ripard2-6/+27
The FIR filters phase depend on the SoC, so let's move it to our quirks structure instead of removing them. Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190118145133.21281-22-paul.kocialkowski@bootlin.com
2019-01-18drm/sun4i: Make COEF_RDY conditionalMaxime Ripard2-4/+6
The COEF_RDY bit isn't found in all the SoCs featuring some variant of the frontend. Add it to our quirks structure. Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190118145133.21281-21-paul.kocialkowski@bootlin.com
2019-01-18drm/sun4i: Set the coef_rdy bit right after the coef have been setMaxime Ripard1-0/+4
The COEF_RDY bit is used to tell the hardware that new FIR filters coefficients have been written to the registers and that the hardware should take them into account starting next frame. Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190118145133.21281-20-paul.kocialkowski@bootlin.com
2019-01-18drm/sun4i: frontend: Add a quirk structureMaxime Ripard2-4/+23
The ACCESS_CTRL bit is not found on all the variants of the frontend, so let's introduce a structure that will hold whether or not we need to set it, and associate it with the compatible. This will be extended for further similar quirks later on. Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190118145133.21281-19-paul.kocialkowski@bootlin.com
2019-01-18drm/sun4i: Move access control before setting the register as documentedMaxime Ripard1-3/+4
Unlike what is currently being done, the ACCESS_CTRL bit documentation asks that this bit should be set before modifying any register. The code in the BSP also does this, so make sure we do this as well. Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190118145133.21281-18-paul.kocialkowski@bootlin.com
2019-01-18drm/sun4i: drv: Allow framebuffer modifiers in mode configPaul Kocialkowski1-0/+1
This is the final step to indicate to the core that our driver supports framebuffer modifiers. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190118145133.21281-17-paul.kocialkowski@bootlin.com
2019-01-18drm/sun4i: layer: Add tiled modifier support and helperPaul Kocialkowski1-1/+15
This introduces a list of supported modifiers for the driver, that includes the Allwinner tiled modifier, as well as a format_mod_supported callback. The callback uses both the backend and frontend helpers to indicate per-format modifier support (including for the linear modifier). Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190118145133.21281-16-paul.kocialkowski@bootlin.com
2019-01-18drm/sun4i: frontend: Add and use helper for checking tiling supportPaul Kocialkowski1-1/+23
This introduces a helper to check whether a frontend input format supports tiling mode. This helper is used when tiling is requested in the frontend format support helper. Only semiplanar and planar YUV formats are supported by the hardware. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190118145133.21281-15-paul.kocialkowski@bootlin.com
2019-01-18drm/sun4i: Add buffer stride and offset configuration for tiling modePaul Kocialkowski2-3/+65
This introduces stride and offset configuration for the VPU tiling mode. Stride is calculated differently than it is for linear formats and an offset is calculated, for which new register definitions are introduced. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190118145133.21281-14-paul.kocialkowski@bootlin.com
2019-01-18drm/sun4i: frontend: Add support for tiled YUV input mode configurationPaul Kocialkowski2-4/+12
This introduces the data input mode definitions for the tiled YUV mode, that are used in the input mode helper if tiling is requested. The modifier is passed to the helper from the framebuffer to determine if tiling is requested. Only semiplanar and planar YUV formats are supported for tiling mode. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190118145133.21281-13-paul.kocialkowski@bootlin.com
2019-01-18drm/sun4i: frontend: Add support for planar YUV input formatsPaul Kocialkowski3-1/+66
Planar YUV formats come with 3 distinct planes, which requires configuring the frontend line stride and address registers for the third plane. Our hardware only supports the YUV planes order and in order to support formats with a YVU plane order, a helper is introduced to indicate whether to invert the address of the two chroma planes. Missing definitions for YUV411 and YUV444 input format configuration are also introduced as support is added for these formats. For the input sequence part, no configuration is required for planar YUV formats so zero is returned in that case. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190118145133.21281-11-paul.kocialkowski@bootlin.com
2019-01-18drm/sun4i: frontend: Add support for semi-planar YUV input formatsPaul Kocialkowski3-5/+55
Semi-planar YUV formats use two distinct planes, one for luminance and one for chrominance. To add support for them, we need to configure the second line stride and buffer address registers to setup the second YUV plane. New definitions are introduced to configure the input format register for the YUV420 and YUV422 semi-planar formats. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190118145133.21281-10-paul.kocialkowski@bootlin.com
2019-01-18drm/sun4i: frontend: Add support for packed YUV422 input formatsPaul Kocialkowski2-0/+27
This introduces support for packed YUV formats with 4:2:2 sampling using the frontend. Definitions are introduced for the data format and pixel sequence input format register values. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190118145133.21281-9-paul.kocialkowski@bootlin.com
2019-01-18drm/sun4i: frontend: Configure and enable YUV to RGB CSC when neededPaul Kocialkowski2-2/+23
In prevision of adding support for YUV formats, set the YUV to RGB colorspace conversion coefficients if required and don't bypass the CSC engine when converting. The BT601 coefficients from the A33 BSP are copied over from the backend code. Because of module inter-dependency, we can't have the frontend use these coefficients from the backend directly. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190118145133.21281-8-paul.kocialkowski@bootlin.com
2019-01-18drm/sun4i: Move the BT.601 CSC coefficients to the frontendPaul Kocialkowski3-22/+24
Both the backend and the frontend need the BT.601 CSC coefficients for YUV to RGB conversion. Since the backend has a dependency on the frontend (and not the other way round), move the coefficients there so that both can access them without having to duplicate them. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190118145133.21281-7-paul.kocialkowski@bootlin.com
2019-01-18drm/sun4i: frontend: Determine input format based on colorspacePaul Kocialkowski1-6/+4
Since all the RGB input formats have the same value for the DATA_FMT field of the INPUT_FMT register, we can group them when the format is known to be RGB. Here, we assume that a non-YUV format is RGB, because the hardware does not support any other colorspace than RGB and YUV. Use the DRM format info structure to check whether the format uses a YUV colorspace. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190118145133.21281-6-paul.kocialkowski@bootlin.com
2019-01-18drm/sun4i: frontend: Pass DRM format info to input format helpersPaul Kocialkowski1-7/+13
The helper returning the input mode needs to know the number of planes for the provided format. Passing the fourcc requires iterating through the format info list in order to return the number of planes. Pass the DRM format info structure directly instead to all helpers related to configuring the input format, since it's available to the caller. Also rename the input format in the caller function to keep things consistent. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190118145133.21281-5-paul.kocialkowski@bootlin.com
2019-01-18drm/sun4i: backend: Use explicit fourcc helpers for packed YUV422 checkPaul Kocialkowski1-1/+2
Checking for the number of planes is not sufficient to en ensure that the format is a packed YUV422. Use explicit fourcc helpers for the check instead. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190118145133.21281-4-paul.kocialkowski@bootlin.com
2019-01-19Merge tag 'acpi-5.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds1-0/+1
Pull ACPI fixes from Rafael Wysocki: "These fix an ACPI initialization ordering issue introduced in the 4.17 time frame and causing functional problems to appear on multiple systems and fix some fallout of the recent change to enable building kernels with ACPI support and without PCI. Specifics: - Restore the ACPI initialization ordering changed implicitly by the module-level AML handling rework during the 4.17 development cycle that caused the EC address space handler based on information from ECDT to be set up before loading AML definition blocks, making it effectively not accessible by AML on some systems that don't work as expected any more (Rafael Wysocki). - Add direct dependencies on PCI to Kconfig in multiple places for code that depends on both ACPI and PCI, but the PCI dependency was implicitly satisfied by the ACPI dependency before, to prevent invalid configurations from being created, for example by randconfig (Sinan Kaya)" * tag 'acpi-5.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: EC: Look for ECDT EC after calling acpi_load_tables() drivers: thermal: int340x_thermal: Make PCI dependency explicit x86/intel/lpss: Make PCI dependency explicit platform/x86: apple-gmux: Make PCI dependency explicit platform/x86: intel_pmc: Make PCI dependency explicit platform/x86: intel_ips: make PCI dependency explicit vga-switcheroo: make PCI dependency explicit ata: pata_acpi: Make PCI dependency explicit ACPI / LPSS: Make PCI dependency explicit
2019-01-18drm/i915/dp: remove PANEL_POWER_OFF macro and its useJani Nikula2-3/+1
It's superfluous. Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/7987938a7950853ac3ee43c82fb9cbb0cd59a2fa.1547726792.git.jani.nikula@intel.com
2019-01-18drm/i915/selftests: Make evict tolerant of foreign objectsChris Wilson1-11/+53
The evict selftests presumed that all objects in use had been allocated by itself. This is a dubious claim and so instead of asserting complete control over the object lists, take (temporary) ownership of them instead. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190118113632.7056-1-chris@chris-wilson.co.uk
2019-01-18drm/i915: Use b->irq_enable() as predicate for mock engineChris Wilson4-22/+8
Since commit d4ccceb05591 ("drm/i915/icl: Ringbuffer interrupt handling") we have required a mechanism to avoid touching the interrupt hardware for breadcrumbs, superseding our mock interface for selftests. The residual problem (ideas welcome) is in probing the mock ring registers for ring_is_idle. Hmm, maybe we should just install mock handlers for i915->uncore.mmio__write and friends? Only problem being is that we would to truly mock some expected reads. :( References: d4ccceb05591 ("drm/i915/icl: Ringbuffer interrupt handling") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190118112225.13780-1-chris@chris-wilson.co.uk
2019-01-18drm: arm/komeda: Remove IRQ parsing from initial seriesLiviu Dudau3-12/+1
The initial series is only introducing the basic components and not implementing IRQ handling. Remove the left over code that touches IRQs until the proper implementation is introduced in a later series. Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
2019-01-18drm/i915/selftests: Query the vm under test for hugepage supportChris Wilson1-1/+1
Since we have the ppgtt we want to test, we can ask it directly if it is suitable for the hugepage test we intend to undertake. v2: Not everyone has full-ppgtt Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190117230512.4789-1-chris@chris-wilson.co.uk
2019-01-18drm/i915/breadcrumbs: Drop assertion that we've already enabled irqsChris Wilson1-17/+11
The motivation for introducing the check that we only enable breadcrumb irqs if the device's irq was installed was once upon a time we waited during suspend after disabling interrupts (which was quite slow until the bug was discovered). Since then we have the notion of pinning the breadcrumb irq, broadening it from the sole purpose of user interrupt notification and waiting, and more importantly decoupling it from a very defined time period during which enabling the irq was expected. So stop insisting the irq is installed before we setup our IMR masks, if the IER isn't yet enabled, nothing will happen and we will timeout instead, revealing the lack of irq in the hang debug messages. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190117233126.30165-1-chris@chris-wilson.co.uk
2019-01-18drm/bridge: lvds-encoder: add powerdown-gpios supportPeter Rosin1-0/+34
Optionally power down the LVDS-encoder when it is not in use. Signed-off-by: Peter Rosin <peda@axentia.se> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190111151843.11114-6-peda@axentia.se
2019-01-18drm/bridge: lvds-encoder: add dev helper variable in .probe()Peter Rosin1-10/+9
Make the code easier to read and modify. Signed-off-by: Peter Rosin <peda@axentia.se> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190111151843.11114-5-peda@axentia.se
2019-01-18drm/i915: Fix wakeref cookie handling in debugfs/i915_forcewake_userTvrtko Ursulin1-2/+3
To avoid a false positive of a leaked wakeref, we can store the cookie in file->private_data and use it in intel_runtime_pm_put. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190117144831.13156-1-tvrtko.ursulin@linux.intel.com
2019-01-18Merge branch 'linux-4.21' of git://github.com/skeggsb/linux into drm-fixesDave Airlie1-0/+33
nouveau support for TU102 (RTX 2080 Ti) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Ben Skeggs <bskeggs@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/CABDvA=mQsRr0BpRpv3n6UjthHush4u_kQR3oUGHkBtAHTmyCYw@mail.gmail.com
2019-01-18drm/nouveau/core: recognise TU102Ben Skeggs1-0/+33
Would usually do this split-out, verifying each component indivitually, but this has been squashed together to be more palatable for merging in 5.0-rc. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2019-01-18Merge tag 'drm-misc-next-2019-01-16' of git://anongit.freedesktop.org/drm/drm-misc into drm-nextDave Airlie134-1347/+2756
drm-misc-next for 5.1: UAPI Changes: - New fourcc identifier for ARM Framebuffer Compression v1.3 Cross-subsystem Changes: Core Changes: - Reorganisation of drm_device and drm_framebuffer headers - Cleanup of the drmP inclusion - Fix leaks in the fb-helpers - Allow for depth different from bpp in fb-helper fbdev emulation - Remove drm_mode_object from drm_display_mode Driver Changes: - Add reflection properties to rockchip - a bunch of fixes for virtio - a bunch of fixes for dp_mst and drivers using it, and introduction of a new refcounting scheme - Convertion of bochs to atomic and generic fbdev emulation - Allow meson to remove the firmware framebuffers [airlied: patch rcar-du to add drm_modes.h] Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190116200428.u2n4jbk4mzza7n6e@flea
2019-01-18Merge tag 'drm-misc-fixes-2019-01-17' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixesDave Airlie9-66/+20
drm-misc-fixes for v5.0-rc3: - Add missing calls to of_node_put to sun4i, meson, and rockchip. - Drop unimplemented prime callbacks in virtio and qxl, so support for prime is not advertised on those drivers. - Fix mode switching regression in meson. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/9af07312-f435-2fda-65a2-9fe92cdf5da4@linux.intel.com
2019-01-18Merge tag 'drm-intel-fixes-2019-01-17' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixesDave Airlie4-6/+29
drm/i915/gvt fixes for v5.0-rc3 "This contains one cmd parser failure fix to allow cmd access for one register, and fix region cleanup properly in vGPU destroy, and another fix for critical mmap size check mistake." Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87ef9bfusc.fsf@intel.com
2019-01-18Merge branch 'drm-fixes-5.0' of git://people.freedesktop.org/~agd5f/linux into drm-fixesDave Airlie14-59/+65
Fixes for 5.0: - Fix KFD on ARM64 - Fix KFD topology with mixed APU and dGPU systems - Powerplay fix for vega12 - DC Raven fixes - Freesync fix Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190116224524.3314-1-alexander.deucher@amd.com
2019-01-17drm/i915: Limit the for_each_set_bit() to the valid rangeChris Wilson1-1/+3
Let static analyzers (smatch) know that we are not going to wander off the end of the array by providing a tight upper bound: drivers/gpu/drm/i915/intel_display.c:9532 hsw_get_transcoder_state() error: buffer overflow 'dev_priv->__info.trans_offsets' 6 <= 31 References: 0716931a82b4 ("drm/i915/icl: fix transcoder state readout") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Madhav Chauhan <madhav.chauhan@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190116155421.7660-1-chris@chris-wilson.co.uk
2019-01-17drm/amdgpu: Add APTX quirk for Lenovo laptopAlex Deucher1-0/+1
Needs ATPX rather than _PR3 for dGPU power control. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=202263 Reviewed-by: Jim Qu <Jim.Qu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.