| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Now that I've specified how the end-of-pipeline flushing should work,
we're never going to use this function.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Dave Emett <david.emett@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181203222438.25417-2-eric@anholt.net
|
|
SKL+ do not use crtc_state->update_wm_pre, so there is absolutely no
point it setting it. crtc_state->update_wm_pre only exists as a
temporary hack for pre-g4x platforms until we redo their
watermarks to be be atomic.
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181113172330.26069-3-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
We do return an error when the watermark calculation fails, so
the FIXME claiming otherwise is outdated. Remove it.
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181113172330.26069-2-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
skl_compute_wm() wants to compare the old and new watermarks. Currently
it gets at the old watermarks via crtc->state, which is confusing since
it can point at either the old or the new state depending on where
in the sequence we are. In this case it is correct since we have not yet
swapped the states, but let's make it super clear what this is doing
by using the explicit old state.
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181113172330.26069-1-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Some new variants require updated firmware.
V2: add MODULE_FIRMWARE for new firmwares
Reviewed-by: Huang Rui <ray.huang@amd.com> (v1)
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Adding an extra MI_STORE_DWORD_IMM to the gpu relocation path for gen3
was good, but still not good enough. To survive 24+ hours under test we
needed to perform not one, not two but three extra store-dw. Doing so
for each GPU relocation was a little unsightly and since we need to
worry about userspace hitting the same issues, we should apply the dummy
store-dw into the EMIT_FLUSH.
Fixes: 7dd4f6729f92 ("drm/i915: Async GPU relocation processing")
References: 7fa28e146994 ("drm/i915: Write GPU relocs harder with gen3")
Testcase: igt/gem_tiled_fence_blits # blb/pnv
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181207134037.11848-1-chris@chris-wilson.co.uk
|
|
Although commit fb6f0b64e455 ("drm/i915: Prevent machine hang from
Broxton's vtd w/a and error capture") applied cleanly after a 24 month
hiatus, the code had moved on with new methods for peeking and fetching
the captured gpu info. Make sure we catch all uses of the stashed error
state and avoid dereferencing the error pointer.
v2: Move error pointer determination into i915_gpu_capture_state
v3: Restore early check to avoid capturing and then throwing away
subsequent GPU error states.
Fixes: fb6f0b64e455 ("drm/i915: Prevent machine hang from Broxton's vtd w/a and error capture")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181207110554.19897-1-chris@chris-wilson.co.uk
|
|
Many errs of the form:
drivers/gpu/drm/i915/selftests/intel_hangcheck.c: In function ‘__igt_reset_evict_vma’:
./include/linux/kern_levels.h:5:18: error: format ‘%x’ expects argument of type ‘unsigned int’, but argum
Fixes: b312d8ca3a7c ("dma-buf: make fence sequence numbers 64 bit v2")
Cc: Christian König <christian.koenig@amd.com>
Cc: Chunming Zhou <david1.zhou@amd.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20181207123428.16257-1-mika.kuoppala@linux.intel.com
|
|
Currently we face a severe problem on Braswell that manifests as invalid
ppGTT accesses. The code tries to maintain the PDP (page directory
pointers) inside the context in two ways, direct write into the context
and a pipelined LRI update. The direct write into the context is
fundamentally racy as it is unserialised with any access (read or write)
the GPU is doing. By asserting that Braswell is not used with vGPU
(currently an unsupported platform) we can eliminate the dangerous
direct write into the context image and solely use the pipelined update.
However, the LRI of the PDP fouls up the GPU, causing it to freeze and
take out the machine with "forcewake ack timeouts". This seems possible
to workaround by preventing the GPU from sleeping (via means of
disabling the power-state management interface, i.e. forcing each ring
to remain awake) around the update. Equally, it seems an EMIT_INVALIDATE
before the LRI is sufficient to prevent the forcewake errors.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108656
References: https://bugs.freedesktop.org/show_bug.cgi?id=108714
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181207090213.14352-3-chris@chris-wilson.co.uk
|
|
The recommend procedure was to switch contexts (and mm) then invalidate
the TLBs. Make it so.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181207090213.14352-2-chris@chris-wilson.co.uk
|
|
Move the common engine->emit_flush(EMIT_INVALIDATE) back to the backends
(where it was once previously) as we seek to specialise it in future
patches.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181207090213.14352-1-chris@chris-wilson.co.uk
|
|
Gen11 fails to deliver wrt global observation point on
tail/entry updates and we sometimes see old entry.
Use clflush to forcibly evict our possibly stale copy
of the cacheline in hopes that we get fresh one from gpu.
Obviously there is something amiss in the coherency protocol so
this can be consired as a workaround until real cause
is found.
The working hardware will do the evict without our cue anyways,
so the cost in there should be ameliorated by that fact.
v2: for next pass, s/flush/evict, add reset (Chris)
References: https://bugzilla.freedesktop.org/show_bug.cgi?id=108315
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20181205134612.24822-1-mika.kuoppala@linux.intel.com
|
|
For a lot of use cases we need 64bit sequence numbers. Currently drivers
overload the dma_fence structure to store the additional bits.
Stop doing that and make the sequence number in the dma_fence always
64bit.
For compatibility with hardware which can do only 32bit sequences the
comparisons in __dma_fence_is_later only takes the lower 32bits as significant
when the upper 32bits are all zero.
v2: change the logic in __dma_fence_is_later
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Link: https://patchwork.freedesktop.org/patch/266927/
|
|
There is a spelling mistake in an error message, fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
Recently gvt shadow ctx create ppgtt table and this ppgtt's root
pointer is modified at workload dispatch, then we lose the original
ppgtt's root pointer, this causes the ppgtt destroy function abnormal
as it will release the wrong root table.
This patch save i915 context ppgtt root pointer at shadow
ctx creation and restore it at shadow ctx destruction.
v2: Split save and restore function (Zhenyu)
Fixes:4f15665ccbba("drm/i915: Add ppgtt to GVT GEM context")
Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
Fix a typo in the error message reporting.
Signed-off-by: Peng Hao <peng.hao2@zte.com.cn>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
s/ME_SEMAPHORE_/MI_SEMAPHORE_
Signed-off-by: Xinyun Liu <xinyun.liu@intel.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
Host print below warning message when creating guest:
"gvt: vgpu(2) Invalid FORCE_NONPRIV write 83a8".
Register 0x83a8 should be in force-to-nonpriv whitelist as required by
guest
v2: update commit message to describe purpose of this patch in detail
(zhenyu wang)
Signed-off-by: Zhao Yan <yan.y.zhao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
Final changes to drm-misc-next for v4.21:
UAPI Changes:
Core Changes:
- Add dma_fence_get_stub to dma-buf, and use it in drm/syncobj.
- Add and use DRM_MODESET_LOCK_BEGIN/END helpers.
- Small fixes to drm_atomic_helper_resume(), drm_mode_setcrtc() and
drm_atomic_helper_commit_duplicated_state()
- Fix drm_atomic_state_helper.[c] extraction.
Driver Changes:
- Small fixes to tinydrm, vkms, meson, rcar-du, virtio, vkms,
v3d, and pl111.
- vc4: Allow scaling and YUV formats on cursor planes.
- v3d: Enable use of the Texture Formatting Unit, and fix
prime imports of buffers from other drivers.
- Add support for the AUO G101EVN010 panel.
- sun4i: Enable support for the H6 display engine.
Signed-off-by: Dave Airlie <airlied@redhat.com>
[airlied: added drm/v3d: fix broken build to the merge commit]
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/321be9d3-ab75-5f92-8193-e5113662edef@linux.intel.com
|
|
Braswell is really picky about having our writes posted to memory before
we execute or else the GPU may see stale values. A wmb() is insufficient
as it only ensures the writes are visible to other cores, we need a full
mb() to ensure the writes are in memory and visible to the GPU.
The most frequent failure in flushing before execution is that we see
stale PTE values and execute the wrong pages.
References: 987abd5c62f9 ("drm/i915/execlists: Force write serialisation into context image vs execution")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181206084431.9805-3-chris@chris-wilson.co.uk
|
|
We can move the remaining RCS workarounds applied to only gen8 to the
engine->wa_list, and then reduce all engine->init_hw callbacks to common
code. The benefit of using the new wa_list is that we verify that the
registers are indeed restored and keep their magic values.
v2: INSTPM_FORCE_ORDERING is already part of gen8_ctx_workarounds, and
as confirmed by the mmio verification is a part of the context image!
v3: MI_MODE is already part of gen8_ctx_workarounds...
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181206180713.6827-2-chris@chris-wilson.co.uk
|
|
The mmio readback for verify_gt_engine_wa() also needs a runtime-pm
wakeref, so effectively do the entirety of both engine workarounds
tests. As such simplify the rpm behaviour here by acquiring the wakeref
for the whole of each subtest. It would be still useful to later verify
the registers retain their magic values across rpm suspend/resume.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181206180713.6827-1-chris@chris-wilson.co.uk
|
|
If the SOR is already up and running when the kernel driver is probed,
setting a mode will typically fail. This can be seen for example on
Jetson TX2. Under certain circumstances the generic power domain code
will cause the SOR to be reset. However, if the power domain is never
powered off (this can happen if the HDA controller is enabled, which
is part of the same power domain as the SOR), then the SOR will end up
not getting reset and fail to properly set a mode.
To work around this, try to get the reset control and assert/deassert
it, irrespective of whether or not a generic power domain is attached
to the SOR. On platforms where the kernel implements generic power
domains (up to Tegra210) this will fail, because the power domain will
already have acquired an exclusive reference to the reset control. But
on recent platforms there the BPMP provides an ABI to control power
domains, it's possible to acquire the reset control from SOR and use
it to put the SOR into a known good state at probe time.
The proper solution for this is to make the SOR driver capable of
dealing with hardware that's already up and running (by first grace-
fully shutting it down, or perhaps by seamlessly transitioning to the
kernel driver and taking over the running display configuration). That
is fairly involved, though, so we'll go with this quickfix for now.
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Remove the temporary workaround of storing the Tegra186 HDMI/DP I/O pad
ID in the SOR driver. The definition has long been available in the
soc/tegra/pmc.h header file.
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
I missed one case during the recent revert of the replace_fence
interface change.
Fixes: 0b258ed1a219 drm: revert "expand replace_fence to support timeline point v2"
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/266134/
|
|
At enable/disable of the HDCP encryption, for encryption status change
we need minimum one frame duration. And we might program this bit any
point(start/End) in the previous frame.
With 20mSec, observed the timeout for change in encryption status.
Since this is not time critical operation and we need to hold on
until the status is changed, fixing the timeout to 50mSec. (Based on
trial and error method!)
v2:
%s/TIME_FOR_ENCRYPT_STATUS_CHANGE/ENCRYPT_STATUS_CHANGE_TIMEOUT_MS
[Sean Paul]
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1544010283-20223-5-git-send-email-ramalingam.c@intel.com
|
|
Adding a debug log when the DP_AUX_NATIVE_REPLY_ACK is missing
for aksv write. This helps to locate the possible non responding
DP HDCP sinks.
v2:
Rewritten for readability [Sean Paul]
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1544010283-20223-4-git-send-email-ramalingam.c@intel.com
|
|
HDCP1.4 is enabled and validated only on GEN9+ platforms.
v2:
Removed the unnecessary parens [Ville]
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1544010283-20223-3-git-send-email-ramalingam.c@intel.com
|
|
HDCP1.4 key load process varies between Intel platform to platform.
For Gen9 platforms except BXT and GLK, HDCP1.4 key is loaded using
the GT Driver Mailbox interface. So all GEN9_BC platforms will use
the GT Driver Mailbox interface for HDCP1.4 key load.
v2:
Using the IS_GEN9_BC for filtering the platforms [Ville]
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1544010283-20223-2-git-send-email-ramalingam.c@intel.com
|
|
When unloading the ast driver, a warning message is printed by
drm_mode_config_cleanup() because a reference is still held to one of
the drm_connector structs.
Correct this by calling drm_crtc_force_disable_all() in
ast_fbdev_destroy().
Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1e613f3c630c7bbc72e04a44b178259b9164d2f6.1543798395.git.sbobroff@linux.ibm.com
|
|
UAPI:
- Distinguish lease events from hotplug (Daniel)
Other:
- omap: Restore panel-dpi bus flags (Tomi)
- omap: Fix a couple of dsi issues (Sebastian)
Cc: Sebastian Reichel <sebastian.reichel@collabora.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20181205201428.GA35447@art_vandelay
|
|
Fixes for 4.20:
- Fix banding regression on 6 bpc panels
- Vega20 fix for six 4k displays
- Fix LRU handling in ttm_buffer_object_transfer
- Use proper MC firmware for newer polaris variants
- Vega20 powerplay fixes
- VCN suspend/resume fix for PCO
- Misc other fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181205192934.2857-1-alexander.deucher@amd.com
|
|
Pull request of 2018-12-05
Page flip with damage by Deepak and others,
Various vmwgfx minor fixes anc cleanups.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thellstrom@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181205103554.3675-1-thellstrom@vmware.com
|
|
- Refactoring of DMA and IOMMU code
. This patch series simplifies DMA mapping creation by avoiding looping
all components to get dma device object, reduces code size by merging
IOMMU and DMA code.
- Enhance plane alpha and blend mode support
. This patch series adds configurable plane and pixel blend mode support
for Exynos5433 DECON device.
- Fix color format setting of Mixer driver
. This patch series fixes color format and range setting by splitting
range and format.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1544002853-11661-1-git-send-email-inki.dae@samsung.com
|
|
amdgpu and amdkfd:
- Freesync support
- ABM support in DC
- KFD support for vega12 and polaris12
- Add sdma paging queue support for vega
- Use ACPI to query backlight range on supported platforms
- Clean up doorbell handling
- KFD fix for pasid handling under non-HWS
- Misc cleanups and fixes
scheduler:
- Revert "fix timeout handling v2"
radeon:
- Fix possible overflow on 32 bit
ttm:
- Fix for LRU handling for ghost objects
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181130192505.2946-1-alexander.deucher@amd.com
|
|
GLK and CNL+ supports a bigger FBC tracking area.
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181205004823.30823-1-jose.souza@intel.com
|
|
According to DP spec (2.9.3.1 of DP 1.4) if
EXTENDED_RECEIVER_CAPABILITY_FIELD_PRESENT is set the addresses in DPCD
02200h through 0220Fh shall contain the DPRX's true capability. These
values will match 00000h through 0000Fh, except for DPCD_REV,
MAX_LINK_RATE, DOWN_STREAM_PORT_PRESENT.
Read from DPCD once for all 3 values as this is an expensive operation.
Spec mentions that all of address space 02200h through 0220Fh should
contain the right information however currently only 3 values can
differ.
There is no address space in the intel_dp->dpcd struct for addresses
02200h through 0220Fh, and since so much of the data is a identical,
simply overwrite the values stored in 00000h through 0000Fh with the
values that can be overwritten from addresses 02200h through 0220Fh.
This patch helps with backward compatibility for devices pre DP1.3.
v2: read only dpcd values which can be affected, remove incorrect check,
split into drm include changes into separate patch, commit message,
verbose debugging statements during overwrite.
v3: white space fixes
v4: make path dependent on DPCD revision > 1.2
v5: split into function, removed DPCD rev check
v6: add debugging prints for early exit conditions
v7 (From Manasi):
* Memcpy, memcmp and debig logging based on sizeof(dpcd_ext) (Jani N)
* Exit early (Jani N)
v8 (From Manasi):
* Get rid of superfluous debug prints (Jani N)
* Print entire base DPCD before memcpy (Jani N)
v9 (From Manasi):
* Add uniform newlines (Rodrigo)
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Tested-by: Manasi Navare <manasi.d.navare@intel.com>
Acked-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181129220058.19636-1-manasi.d.navare@intel.com
|
|
Final drm/i915 changes for v4.21:
- ICL DSI video mode enabling (Madhav, Vandita, Jani, Imre)
- eDP sink count fix (José)
- PSR fixes (José)
- DRM DP helper and i915 DSC enabling (Manasi, Gaurav, Anusha)
- DP FEC enabling (Anusha)
- SKL+ watermark/ddb programming improvements (Ville)
- Pixel format fixes (Ville)
- Selftest updates (Chris, Tvrtko)
- GT and engine workaround improvements (Tvrtko)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87va496uoe.fsf@intel.com
|
|
This patch adds two new functions to help client drivers suspend and
resume the scheduler job timeout. This can be useful in cases where the
hardware has preemption support enabled. Using this, it is possible to have
the timeout active only for the ring which is active on the ringbuffer.
This patch also makes the job_list_lock IRQ safe.
Suggested-by: Christian Koenig <Christian.Koenig@amd.com>
Signed-off-by: Sharat Masetty <smasetty@codeaurora.org>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
In cases where the scheduler instance is used as a base object of another
driver object, it's not clear if the driver can call scheduler cleanup on the
fail path. So, Set the sched->thread to NULL, so that the driver can safely
call drm_sched_fini() during cleanup.
Signed-off-by: Sharat Masetty <smasetty@codeaurora.org>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
kfree(NULL) is safe, so removes NULL check before freeing the mem.
This patch also fix the ifnullfree.cocci warnings.
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
CC: Alex Deucher <alexander.deucher@amd.com>
CC: christian.koenig@amd.com
CC: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
CC: David Airlie <airlied@linux.ie> (maintainer:DRM DRIVERS)
CC: Lyude Paul <lyude@redhat.com>
CC: Rex Zhu <Rex.Zhu@amd.com>
CC: Jim Qu <Jim.Qu@amd.com>
CC: amd-gfx@lists.freedesktop.org
CC: dri-devel@lists.freedesktop.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
In particular, we need the mmMC_VM_XGMI_LFB_CNTL register, for
determining if xGMI is enabled on VG20. This will be used by DC to
determine the correct spread spectrum adjustment for display and audio
clocks.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
SI does not use doorbells, move asic doorbell init later
asic check.
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=108920
Reviewed-by: Oak Zeng <Oak.Zeng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Adjust limits for newer polaris variants.
v2: fix polaris11 kicker (Jerry)
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Update switch limit on newer polaris variants. This may fix
flickering with high refresh rates with mclk switching enabled.
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Tracing is a useful and cheap debug functionality
[How]
This creates a new trace system amdgpu_dm, currently with
three trace events
amdgpu_dc_rreg and amdgpu_dc_wreg report the address and value
of any dc register reads and writes
amdgpu_dc_performance requires at least one of those two to be
enabled. It counts the register reads and writes since the
last entry
v2: Don't check for NULL before kfree
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Replace vcn_v1_0_stop with vcn_v1_0_set_powergating_state during suspend,
to keep adev->vcn.cur_state update. It will fix VCN S3 hung issue.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fixes a comestic issue where spaces were being used
instead of mixed tab and spaces.
Signed-off-by: Pedro Tammela <pctammela@gmail.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20181205110608.5513-1-pctammela@gmail.com
|
|
gvt-fixes-2018-12-04
- Fix tiling mode format on BDW for VFIO gfx dmabuf (Tina)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
From: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181204050633.GY12743@zhen-hp.sh.intel.com
|
|
We stopped re-applying the GT workarounds after engine reset since commit
59b449d5c82a ("drm/i915: Split out functions for different kinds of
workarounds").
Issue with this is that some of the GT workarounds live in the MMIO space
which gets lost during engine resets. So far the registers in 0x2xxx and
0xbxxx address range have been identified to be affected.
This losing of applied workarounds has obvious negative effects and can
even lead to hard system hangs (see the linked Bugzilla).
Rather than just restoring this re-application, because we have also
observed that it is not safe to just re-write all GT workarounds after
engine resets (GPU might be live and weird hardware states can happen),
we introduce a new class of per-engine workarounds and move only the
affected GT workarounds over.
Using the framework introduced in the previous patch, we therefore after
engine reset, re-apply only the workarounds living in the affected MMIO
address ranges.
v2:
* Move Wa_1406609255:icl to engine workarounds as well.
* Rename API. (Chris Wilson)
* Drop redundant IS_KABYLAKE. (Chris Wilson)
* Re-order engine wa/ init so latest platforms are first. (Rodrigo Vivi)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Bugzilla: https://bugzilla.freedesktop.org/show_bug.cgi?id=107945
Fixes: 59b449d5c82a ("drm/i915: Split out functions for different kinds of workarounds")
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20181203133341.10258-1-tvrtko.ursulin@linux.intel.com
(cherry picked from commit 4a15c75c42460252a63d30f03b4766a52945fb47)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
Eric Anholt
Ville Syrjälä
Alex Deucher
Chris Wilson
Mika Kuoppala
Christian König
Colin Ian King
Xiong Zhang
Peng Hao
Xinyun Liu
Zhao Yan
Dave Airlie
Thierry Reding
Ramalingam C
Sam Bobroff
José Roberto de Souza
Matt Atwood
Sharat Masetty
Wen Yang
Leo Li
David Francis
James Zhu
Pedro Tammela
Joonas Lahtinen
Tvrtko Ursulin