aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/gpu
AgeCommit message (Collapse)AuthorFilesLines
2018-11-26drm/meson: Fixes for drm_crtc_vblank_on/off supportNeil Armstrong2-2/+28
Since Linux 4.17, calls to drm_crtc_vblank_on/off are mandatory, and we get a warning when ctrc is disabled : " driver forgot to call drm_crtc_vblank_off()" But, the vsync IRQ was not totally disabled due the transient hardware state and specific interrupt line, thus adding proper IRQ masking from the HHI system control registers. The last change fixes a race condition introduced by calling the added drm_crtc_vblank_on/off when an HPD event occurs from the HDMI connector, triggering a WARN_ON() in the _atomic_begin() callback when the CRTC is disabled, thus also triggering a WARN_ON() in drm_vblank_put() : WARNING: CPU: 0 PID: 1185 at drivers/gpu/drm/meson/meson_crtc.c:157 meson_crtc_atomic_begin+0x78/0x80 [...] Call trace: meson_crtc_atomic_begin+0x78/0x80 drm_atomic_helper_commit_planes+0x140/0x218 drm_atomic_helper_commit_tail+0x38/0x80 commit_tail+0x7c/0x80 drm_atomic_helper_commit+0xdc/0x150 drm_atomic_commit+0x54/0x60 restore_fbdev_mode_atomic+0x198/0x238 restore_fbdev_mode+0x6c/0x1c0 drm_fb_helper_restore_fbdev_mode_unlocked+0x7c/0xf0 drm_fb_helper_set_par+0x34/0x60 drm_fb_helper_hotplug_event.part.28+0xb8/0xc8 drm_fbdev_client_hotplug+0xa4/0xe0 drm_client_dev_hotplug+0x90/0xe0 drm_kms_helper_hotplug_event+0x3c/0x48 drm_helper_hpd_irq_event+0x134/0x168 dw_hdmi_top_thread_irq+0x3c/0x50 [...] WARNING: CPU: 0 PID: 1185 at drivers/gpu/drm/drm_vblank.c:1026 drm_vblank_put+0xb4/0xc8 [...] Call trace: drm_vblank_put+0xb4/0xc8 drm_crtc_vblank_put+0x24/0x30 drm_atomic_helper_wait_for_vblanks.part.9+0x130/0x2b8 drm_atomic_helper_commit_tail+0x68/0x80 [...] The issue is that vblank need to be enabled in any occurrence of : - atomic_enable() - atomic_begin() and state->enable == true, which was not the case Moving the CRTC enable code to a common function and calling in one of these occurrence solves this race condition and makes sure vblank is enabled in each call to _atomic_begin() from the HPD event leading to drm_atomic_helper_commit_planes(). To Summarize : - Make sure that the CRTC code will call the drm_crtc_vblank_on()/off() - *Really* mask the Vsync IRQ - Initialize and enable vblank at the first atomic_begin()/_atomic_enable() Cc: stable@vger.kernel.org # 4.17+ Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Lyude Paul <lyude@redhat.com> [fixed typos+added cc for stable] Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181122160103.10993-1-narmstrong@baylibre.com Signed-off-by: Sean Paul <seanpaul@chromium.org>
2018-11-26drm: set is_master to 0 upon drm_new_set_master() failureSergio Correia1-0/+2
When drm_new_set_master() fails, set is_master to 0, to prevent a possible NULL pointer deref. Here is a problematic flow: we check is_master in drm_is_current_master(), then proceed to call drm_lease_owner() passing master. If we do not restore is_master status when drm_new_set_master() fails, we may have a situation in which is_master will be 1 and master itself, NULL, leading to the deref of a NULL pointer in drm_lease_owner(). This fixes the following OOPS, observed on an ArchLinux running a 4.19.2 kernel: [ 97.804282] BUG: unable to handle kernel NULL pointer dereference at 0000000000000080 [ 97.807224] PGD 0 P4D 0 [ 97.807224] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 97.807224] CPU: 0 PID: 1348 Comm: xfwm4 Tainted: P OE 4.19.2-arch1-1-ARCH #1 [ 97.807224] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./AB350 Pro4, BIOS P5.10 10/16/2018 [ 97.807224] RIP: 0010:drm_lease_owner+0xd/0x20 [drm] [ 97.807224] Code: 83 c4 18 5b 5d c3 b8 ea ff ff ff eb e2 b8 ed ff ff ff eb db e8 b4 ca 68 fb 0f 1f 40 00 0f 1f 44 00 00 48 89 f8 eb 03 48 89 d0 <48> 8b 90 80 00 00 00 48 85 d2 75 f1 c3 66 0f 1f 44 00 00 0f 1f 44 [ 97.807224] RSP: 0018:ffffb8cf08e07bb0 EFLAGS: 00010202 [ 97.807224] RAX: 0000000000000000 RBX: ffff9cf0f2586c00 RCX: ffff9cf0f2586c88 [ 97.807224] RDX: ffff9cf0ddbd8000 RSI: 0000000000000000 RDI: 0000000000000000 [ 97.807224] RBP: ffff9cf1040e9800 R08: 0000000000000000 R09: 0000000000000000 [ 97.807224] R10: ffffdeb30fd5d680 R11: ffffdeb30f5d6808 R12: ffff9cf1040e9888 [ 97.807224] R13: 0000000000000000 R14: dead000000000200 R15: ffff9cf0f2586cc8 [ 97.807224] FS: 00007f4145513180(0000) GS:ffff9cf10ea00000(0000) knlGS:0000000000000000 [ 97.807224] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 97.807224] CR2: 0000000000000080 CR3: 00000003d7548000 CR4: 00000000003406f0 [ 97.807224] Call Trace: [ 97.807224] drm_is_current_master+0x1a/0x30 [drm] [ 97.807224] drm_master_release+0x3e/0x130 [drm] [ 97.807224] drm_file_free.part.0+0x2be/0x2d0 [drm] [ 97.807224] drm_open+0x1ba/0x1e0 [drm] [ 97.807224] drm_stub_open+0xaf/0xe0 [drm] [ 97.807224] chrdev_open+0xa3/0x1b0 [ 97.807224] ? cdev_put.part.0+0x20/0x20 [ 97.807224] do_dentry_open+0x132/0x340 [ 97.807224] path_openat+0x2d1/0x14e0 [ 97.807224] ? mem_cgroup_commit_charge+0x7a/0x520 [ 97.807224] do_filp_open+0x93/0x100 [ 97.807224] ? __check_object_size+0x102/0x189 [ 97.807224] ? _raw_spin_unlock+0x16/0x30 [ 97.807224] do_sys_open+0x186/0x210 [ 97.807224] do_syscall_64+0x5b/0x170 [ 97.807224] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 97.807224] RIP: 0033:0x7f4147b07976 [ 97.807224] Code: 89 54 24 08 e8 7b f4 ff ff 8b 74 24 0c 48 8b 3c 24 41 89 c0 44 8b 54 24 08 b8 01 01 00 00 89 f2 48 89 fe bf 9c ff ff ff 0f 05 <48> 3d 00 f0 ff ff 77 30 44 89 c7 89 44 24 08 e8 a6 f4 ff ff 8b 44 [ 97.807224] RSP: 002b:00007ffcced96ca0 EFLAGS: 00000293 ORIG_RAX: 0000000000000101 [ 97.807224] RAX: ffffffffffffffda RBX: 00005619d5037f80 RCX: 00007f4147b07976 [ 97.807224] RDX: 0000000000000002 RSI: 00005619d46b969c RDI: 00000000ffffff9c [ 98.040039] RBP: 0000000000000024 R08: 0000000000000000 R09: 0000000000000000 [ 98.040039] R10: 0000000000000000 R11: 0000000000000293 R12: 0000000000000024 [ 98.040039] R13: 0000000000000012 R14: 00005619d5035950 R15: 0000000000000012 [ 98.040039] Modules linked in: nct6775 hwmon_vid algif_skcipher af_alg nls_iso8859_1 nls_cp437 vfat fat uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_common arc4 videodev media snd_usb_audio snd_hda_codec_hdmi snd_usbmidi_lib snd_rawmidi snd_seq_device mousedev input_leds iwlmvm mac80211 snd_hda_codec_realtek snd_hda_codec_generic snd_hda_intel snd_hda_codec edac_mce_amd kvm_amd snd_hda_core kvm iwlwifi snd_hwdep r8169 wmi_bmof cfg80211 snd_pcm irqbypass snd_timer snd libphy soundcore pinctrl_amd rfkill pcspkr sp5100_tco evdev gpio_amdpt k10temp mac_hid i2c_piix4 wmi pcc_cpufreq acpi_cpufreq vboxnetflt(OE) vboxnetadp(OE) vboxpci(OE) vboxdrv(OE) msr sg crypto_user ip_tables x_tables ext4 crc32c_generic crc16 mbcache jbd2 fscrypto uas usb_storage dm_crypt hid_generic usbhid hid [ 98.040039] dm_mod raid1 md_mod sd_mod crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel pcbc ahci libahci aesni_intel aes_x86_64 libata crypto_simd cryptd glue_helper ccp xhci_pci rng_core scsi_mod xhci_hcd nvidia_drm(POE) drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm agpgart nvidia_uvm(POE) nvidia_modeset(POE) nvidia(POE) ipmi_devintf ipmi_msghandler [ 98.040039] CR2: 0000000000000080 [ 98.040039] ---[ end trace 3b65093b6fe62b2f ]--- [ 98.040039] RIP: 0010:drm_lease_owner+0xd/0x20 [drm] [ 98.040039] Code: 83 c4 18 5b 5d c3 b8 ea ff ff ff eb e2 b8 ed ff ff ff eb db e8 b4 ca 68 fb 0f 1f 40 00 0f 1f 44 00 00 48 89 f8 eb 03 48 89 d0 <48> 8b 90 80 00 00 00 48 85 d2 75 f1 c3 66 0f 1f 44 00 00 0f 1f 44 [ 98.040039] RSP: 0018:ffffb8cf08e07bb0 EFLAGS: 00010202 [ 98.040039] RAX: 0000000000000000 RBX: ffff9cf0f2586c00 RCX: ffff9cf0f2586c88 [ 98.040039] RDX: ffff9cf0ddbd8000 RSI: 0000000000000000 RDI: 0000000000000000 [ 98.040039] RBP: ffff9cf1040e9800 R08: 0000000000000000 R09: 0000000000000000 [ 98.040039] R10: ffffdeb30fd5d680 R11: ffffdeb30f5d6808 R12: ffff9cf1040e9888 [ 98.040039] R13: 0000000000000000 R14: dead000000000200 R15: ffff9cf0f2586cc8 [ 98.040039] FS: 00007f4145513180(0000) GS:ffff9cf10ea00000(0000) knlGS:0000000000000000 [ 98.040039] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 98.040039] CR2: 0000000000000080 CR3: 00000003d7548000 CR4: 00000000003406f0 Signed-off-by: Sergio Correia <sergio@correia.cc> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20181122053329.2692-1-sergio@correia.cc Signed-off-by: Sean Paul <seanpaul@chromium.org>
2018-11-26drm/dp_mst: Skip validating ports during destruction, just refLyude Paul1-2/+13
Jerry Zuo pointed out a rather obscure hotplugging issue that it seems I accidentally introduced into DRM two years ago. Pretend we have a topology like this: |- DP-1: mst_primary |- DP-4: active display |- DP-5: disconnected |- DP-6: active hub |- DP-7: active display |- DP-8: disconnected |- DP-9: disconnected If we unplug DP-6, the topology starting at DP-7 will be destroyed but it's payloads will live on in DP-1's VCPI allocations and thus require removal. However, this removal currently fails because drm_dp_update_payload_part1() will (rightly so) try to validate the port before accessing it, fail then abort. If we keep going, eventually we run the MST hub out of bandwidth and all new allocations will start to fail (or in my case; all new displays just start flickering a ton). We could just teach drm_dp_update_payload_part1() not to drop the port ref in this case, but then we also need to teach drm_dp_destroy_payload_step1() to do the same thing, then hope no one ever adds anything to the that requires a validated port reference in drm_dp_destroy_connector_work(). Kind of sketchy. So let's go with a more clever solution: any port that drm_dp_destroy_connector_work() interacts with is guaranteed to still exist in memory until we say so. While said port might not be valid we don't really care: that's the whole reason we're destroying it in the first place! So, teach drm_dp_get_validated_port_ref() to use the all mighty current_work() function to avoid attempting to validate ports from the context of mgr->destroy_connector_work. I can't see any situation where this wouldn't be safe, and this avoids having to play whack-a-mole in the future of trying to work around port validation. Signed-off-by: Lyude Paul <lyude@redhat.com> Fixes: 263efde31f97 ("drm/dp/mst: Get validated port ref in drm_dp_update_payload_part1()") Reported-by: Jerry Zuo <Jerry.Zuo@amd.com> Cc: Jerry Zuo <Jerry.Zuo@amd.com> Cc: Harry Wentland <Harry.Wentland@amd.com> Cc: <stable@vger.kernel.org> # v4.6+ Reviewed-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181113224613.28809-1-lyude@redhat.com Signed-off-by: Sean Paul <seanpaul@chromium.org>
2018-11-26drm/amdgpu: fix spelling mistake "Pramater" -> "Parameter"Colin Ian King1-2/+3
There is a spelling mistake in the module description text and a comment too, fix them. Also line break overly long comment. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-26drm/amd/display: Remove duplicate headerBrajeswar Ghosh1-1/+0
Remove dce/dce_mem_input.h which is included more than once Signed-off-by: Brajeswar Ghosh <brajeswar.linux@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-26drm/amd/amdkfd: Remove duplicate headerBrajeswar Ghosh1-1/+0
Remove gca/gfx_8_0_enum.h which is included more than once Signed-off-by: Brajeswar Ghosh <brajeswar.linux@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-26drm/amd/amdgpu: Remove duplicate headerBrajeswar Ghosh1-1/+0
Remove drm/drm_fb_helper.h which is included more than once Signed-off-by: Brajeswar Ghosh <brajeswar.linux@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-26drm/amd: Query and use ACPI backlight capsDavid Francis5-12/+170
ACPI ATIF has a function called query backlight transfer characteristics. Among the information returned by this function is the minimum and maximum input signals for the backlight Call that function on ACPI init. When DM backlight device is updated, copy over the backlight caps into DM, but only once. Use the backlight caps in the backlight-to-dc calculation Signed-off-by: David Francis <David.Francis@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-26drm/amd: update ATIF functions in AMD ACPI headerDavid Francis2-126/+56
The ACPI interface in AMD was a few years out of date and contained some unused and deprecated functions Remove functions: Select Active Displays, Get Lid State, Get TV Standard, Set TV Standard, Get Panel Expansion Mode, Set Panel Expansion Mode, Get Graphics Device Types Add functions: Query Backlight Transfer Characteristics, Ready To Undock Notification Changed functions: Get System Parameters, Get System BIOS Requests All changes are right from the standard ATI ACPI Control Methods V0.44 Signed-off-by: David Francis <David.Francis@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-26drm/amd: Add abm level drm propertyDavid Francis6-5/+52
Adaptive Backlight Management (ABM) is a feature that reduces backlight level to save power, while increasing pixel contrast and pixel luminance to maintain readability and image quality. ABM will adjust in response to the pixel luminance of the displayed content. ABM is made available as a drm property on eDP monitors called "abm level", which ranges from 0 to 4. When this property is set to 0, ABM is off. Levels 1 to 4 represent different ranges of backlight reduction. At higher levels both the backlight reduction and pixel adjustment will be greater. ABM requires DMCU firmware, which is currently available for Raven ASICs only. If the feature does not work, please ensure your firmware is up to date. v2: Fix commit message, only attach property if DMCU loaded v3: Store ABM level in crtc state to accommodate dc v4: Fix ABM saving on dpms cycle Signed-off-by: David Francis <David.Francis@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-26drm/amd/display: Load DMCU IRAMDavid Francis7-8/+435
DMCU IRAM must be loaded by the driver before DMCU can function. Move the IRAM code out of the shadows and into a new file modules/power/power_helpers.c The IRAM table contains the backlight curve and ABM parameters Add this new file to the Makefiles Call dmcu_load_iram in late init of DM Move struct dmcu_version from dc.h to dmcu.h to allow dmcu to be included on its own Signed-off-by: David Francis <David.Francis@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-26drm/amdgpu: Fix static checker warningRex Zhu1-1/+1
drivers/gpu/drm/amd/amdgpu/amdgpu_csa.c:49 amdgpu_allocate_static_csa() error: uninitialized symbol 'ptr'. the test if (!bo) doesn't work, as the bo is a pointer to a pointer. if bo create failed, the *bo will be set to NULL. so change to test *bo. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-26drm/amd:Enable/Disable NBPSTATE on On/OFF of UVDGuttula, Suresh3-0/+17
We observe black lines (underflow) on display when playing a 4K video with UVD. On Disabling Low memory P state this issue is not seen. In this patch ,disabling low memory P state only when video size >= 4k. Multiple runs of power measurement shows no impact Signed-off-by: suresh guttula <suresh.guttula@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-26drm/amd/powerplay:add hwmgr callback to update nbpstate on CarrizoGuttula, Suresh2-0/+4
Add hwmgr callback "update_nbdpm_pstate".This will use to access "cz_nbdpm_pstate_enable_disable" function to enable/disable low memory pstate. Signed-off-by: suresh guttula <suresh.guttula@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-26Revert "drm/amd/powerplay: Enable/Disable NBPSTATE on On/OFF of UVD"Shirish S1-4/+1
This reverts commit dbd8299c32f6f413f6cfe322fe0308f3cfc577e8. Reason for revert: This patch sends msg PPSMC_MSG_DisableLowMemoryPstate(0x002e) in wrong of sequence to SMU which is before PPSMC_MSG_UVDPowerON (0x0008). This leads to SMU failing to service the request as it is dependent on UVD to be powered ON, since it accesses UVD registers. This msg should ideally be sent only when the UVD is about to decode a 4k video. Signed-off-by: Shirish S <shirish.s@amd.com> Signed-off-by: suresh guttula <suresh.guttula@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-26drm/amd/display: Fix Scaling (RMX_*) for DC driverBhawanpreet Lakha1-11/+38
Before: We use drm_match_cea_mode() to get the vic for any mode we want to set, most of the time vic will be different for the new mode. DC uses memcmp to check if timing changed, in this case DC will say timing changed and we endup doing a full modeset. Current: Now we check if !RMX_OFF and old_refresh == new_refresh if so we copy the vic from old timing. In a case where we are currently on a lower timing and want to change to higher mode, stream->dst will be different and cause us to do a full modeset, which is what we want. Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-26drm/amd/display: Set RMX_ASPECT as defaultBhawanpreet Lakha1-2/+4
Setting this allows for display scaling by default Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-26drm/i915/ringbuffer: 2-step restartChris Wilson1-2/+9
We may be simply restarting too fast for the culmudgeonly gen3/gen4 as we still see missing interrupts following a reset. So let's try restarting a little slower, first wake up the ring empty and then tell it about the work it has to perform. References: https://bugs.freedesktop.org/show_bug.cgi?id=108735 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181126122821.4537-1-chris@chris-wilson.co.uk
2018-11-26Merge tag 'gvt-fixes-2018-11-26' of https://github.com/intel/gvt-linux into drm-intel-fixesJoonas Lahtinen3-3/+8
gvt-fixes-2018-11-26 - Fix engine check for correct MOCS regs load (Xinyun) - Fix rpm locking for vGPU ggtt init (Henry) - Fix use-after-free when destroy partial ggtt entries (Chris) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> From: Zhenyu Wang <zhenyuw@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181126021820.GL12743@zhen-hp.sh.intel.com
2018-11-26drm: rcar-du: Fix DU3 start/stop on M3-NLaurent Pinchart1-3/+18
Group start/stop is controlled by the DRES and DEN bits of DSYSR0 for the first group and DSYSR2 for the second group. On most DU instances, this maps to the first CRTC of the group. On M3-N, however, DU2 doesn't exist, but DSYSR2 does. There is no CRTC object there that maps to the correct DSYSR register. Commit 9144adc5e5a9 ("drm: rcar-du: Cache DSYSR value to ensure known initial value") switched group start/stop from using group read/write access to DSYSR to a CRTC-based API to cache the DSYSR value. While doing so, it introduced a regression on M3-N by accessing DSYSR3 instead of DSYSR2 to start/stop the second group. To fix this, access the DSYSR register directly through group read/write if the SoC is missing the first DU channel of the group. Keep using the rcar_du_crtc_dsysr_clr_set() function otherwise, to retain the DSYSR caching feature. Fixes: 9144adc5e5a9 ("drm: rcar-du: Cache DSYSR value to ensure known initial value") Reported-by: Hoan Nguyen An <na-hoan@jinso.co.jp> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Tested-by: Simon Horman <horms+renesas@verge.net.au>
2018-11-24drm: replace "drm_connector_unreference" with "drm_connector_put"Fernando Ramos1-1/+1
This patch unifies the naming of DRM functions for reference counting as requested on Documentation/gpu/todo.rst Signed-off-by: Fernando Ramos <greenfoo@gluegarage.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20181115221634.22715-6-greenfoo@gluegarage.com
2018-11-24drm: remove deprecated "drm_dev_unref" functionFernando Ramos1-13/+0
There are no more places where this (deprecated) function is being used from, thus it can now be removed. Signed-off-by: Fernando Ramos <greenfoo@gluegarage.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20181115221634.22715-5-greenfoo@gluegarage.com
2018-11-24drm: replace "drm_dev_unref" function with "drm_dev_put"Fernando Ramos6-11/+11
This patch unifies the naming of DRM functions for reference counting as requested on Documentation/gpu/todo.rst Signed-off-by: Fernando Ramos <greenfoo@gluegarage.com> Acked-by: Boris Brezillon <boris.brezillon@bootlin.com> Acked-by: Alexey Brodkin <abrodkin@synopsys.com> Acked-by: Stefan Agner <stefan@agner.ch> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20181115221634.22715-4-greenfoo@gluegarage.com
2018-11-23drm/i915: Cache the error stringChris Wilson4-175/+243
Currently, we convert the error state into a string every time we read from sysfs (and sysfs reads in page size (4KiB) chunks). We do try to window the string and only capture the portion that is being read, but that means that we must always convert up to the window to find the start. For a very large error state bordering on EXEC_OBJECT_CAPTURE abuse, this is noticeable as it degrades to O(N^2)! As we do not have a convenient hook for sysfs open(), and we would like to keep the lazy conversion into a string, do the conversion of the whole string on the first read and keep the string until the error state is freed. v2: Don't double advance simple_read_from_buffer v3: Due to extreme pain of lack of vrealloc, use a scatterlist v4: Keep the forward iterator loosely cached v5: Stylistic improvements to reduce patch size Reported-by: Jason Ekstrand <jason@jlekstrand.net> Testcase: igt/gem_exec_capture/many* Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Jason Ekstrand <jason@jlekstrand.net> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181123132325.26541-1-chris@chris-wilson.co.uk
2018-11-23drm/atomic-helper: WARN if fake_commit->hw_done is not completed as expectedVille Syrjälä1-1/+3
For real commits we WARN if ->hw_done hasn't been completed by the time drm_atomic_helper_commit_cleanup_done() is called. Let's do the same for the fake commit. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181122143412.11655-2-ville.syrjala@linux.intel.com Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2018-11-23drm/atomic-helper: Complete fake_commit->flip_done potentially earlierVille Syrjälä1-0/+3
Consider the following scenario: 1. nonblocking enable crtc 2. wait for the event 3. nonblocking disable crtc On i915 this can lead to a spurious -EBUSY from step 3 on account of non-enabled planes getting the fake_commit in step 1 and we don't complete the fake_commit-> flip_done until drm_atomic_helper_commit_hw_done() which can happen a long time after the flip event was sent out. This will become somewhat easy to hit on SKL+ once we start to add all the planes for the crtc to every modeset commit for the purposes of forcing a watermark register programming [1]. To make the race a little less pronounced let's complete fake_commit->flip_done after drm_atomic_helper_wait_for_flip_done(). For the single crtc case this should make the race quite theoretical, assuming drm_atomic_helper_wait_for_flip_done() actually has to wait for the real commit flip_done. In case the real commit flip_done gets completed singificantly before drm_atomic_helper_wait_for_flip_done(), or we are dealing with multiple crtcs whose vblanks don't line up nicely the race still exists. [1] https://patchwork.freedesktop.org/patch/262670/ Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Fixes: 080de2e5be2d ("drm/atomic: Check for busy planes/connectors before setting the commit") Testcase: igt/kms_cursor_legacy/*nonblocking-modeset-vs-cursor-atomic Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181122143412.11655-1-ville.syrjala@linux.intel.com Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2018-11-23drm: rcar-du: Reject modes that fail CRTC timing requirementsLaurent Pinchart1-0/+12
The hardware requires the HDSR and VDSR registers to be set to 1 or higher. This translates to a minimum combined horizontal sync and back porch of 20 pixels and a minimum vertical back porch of 3 lines. Reject modes that fail those requirements. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
2018-11-23drm: rcar-du: Fix external clock error checksLaurent Pinchart1-5/+9
The rcar-du driver supports probe deferral for external clocks, but implements it badly by checking the wrong pointer due to a bad copy and paste. Fix it. While at it, reject invalid clocks outright for DU channels that have a display PLL, as the external clock is mandatory in that case. This avoids a WARN_ON() at runtime. Fixes: 1b30dbde8596 ("drm: rcar-du: Add support for external pixel clock") Reported-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
2018-11-23drm: rcar-du: Enable alpha property on primary planesKieran Bingham1-1/+2
The hardware supports alpha on all planes, and using it on the primary plane can be useful. Don't restrict the alpha property to overlay planes. Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2018-11-23drm: rcar-du: lvds: Add R8A77965 supportLaurent Pinchart1-0/+1
Add support for the R-Car M3-N (R8A77965) SoC to the LVDS encoder driver. The encoder appears identical to the M3-W version, we can thus simply point to the generic Gen3 data. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
2018-11-23drm: rcar-du: Fix vblank initializationLaurent Pinchart1-1/+1
The drm_vblank_init() takes the total number of CRTCs as an argument, but the rcar-du driver passes a bitmask of the CRTC indices. Fix it. Fixes: 4bf8e1962f91 ("drm: Renesas R-Car Display Unit DRM driver") Reported-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
2018-11-23drm: rcar-du: Fix the return value in case of error in 'rcar_du_crtc_set_crc_source()'Christophe JAILLET1-1/+1
We return 0 unconditionally in 'rcar_du_crtc_set_crc_source()'. However, 'ret' is set to some error codes if some function calls fail. Return 'ret' instead to propagate the error code. Fixes: 47a52d024e89 ("media: drm: rcar-du: Add support for CRC computation") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2018-11-23drm: rcar-du: Add R8A7744 supportBiju Das1-1/+2
Add support for the R8A7744 DU (which is very similar to the R8A7743 DU); it has 1 DPAD (RGB) output and 1 LVDS output. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2018-11-23drm: rcar-du: Add r8a77470 supportFabrizio Castro1-0/+28
Add RZ/G1C (a.k.a. r8a77470) support to the R-Car DU driver. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2018-11-23drm: rcar-du: Fix typo in commentLaurent Pinchart1-1/+1
Fix the misspelled 'belance' in a comment. Reported-by: Ulrich Hecht <uli+renesas@fpond.eu> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2018-11-23drm/shmobile: Replace drm_dev_unref with drm_dev_putThomas Zimmermann1-2/+2
This patch unifies the naming of DRM functions for reference counting of struct drm_device. The resulting code is more aligned with the rest of the Linux kernel interfaces. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2018-11-23drm/rcar-du: Replace drm_dev_unref with drm_dev_putThomas Zimmermann1-1/+1
This patch unifies the naming of DRM functions for reference counting of struct drm_device. The resulting code is more aligned with the rest of the Linux kernel interfaces. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2018-11-23Merge tag 'drm-intel-fixes-2018-11-22' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixesDave Airlie7-4/+112
- Fix for fastboot DSI panel boot time flicker regression, also fixes Bugzilla #108225 - Fix Bugzilla #101269 to avoid GPU hangs on Sandybridge machines - Avoid GPU hang on error capture on Broxton with Vt-d enabled - Avoid missing GPU relocations on Pineview and Bearlake (Gen3) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181122120555.GA18282@jlahtine-desk.ger.corp.intel.com
2018-11-22drm/i915/hsw: Drop the stereo 3D enabled check in psr_compute_config()José Roberto de Souza1-7/+0
We should not access hardware while computing config also we don't support stereo 3D so this test was never true. Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181121225441.18785-6-jose.souza@intel.com
2018-11-22drm/i915: Keep PSR disabled after a driver reload after a PSR errorJosé Roberto de Souza1-0/+18
If a PSR error happened and the driver is reloaded, the EDP_PSR_IIR will still keep the error set even after the reset done in the irq_preinstall and irq_uninstall hooks. And enabling in this situation cause the screen to freeze in the first time that PSR HW tries to activate so lets keep PSR disabled to avoid any rendering problems. v5: rebased: using edp_psr_shift() v4: Moved handling from intel_psr_compute_config() to intel_psr_init() to avoid hardware access during compute(Ville) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> squash Link: https://patchwork.freedesktop.org/patch/msgid/20181121225441.18785-5-jose.souza@intel.com
2018-11-22drm/i915: Disable PSR when a PSR aux error happenJosé Roberto de Souza2-4/+38
While PSR is active hardware will do aux transactions by it self to wakeup sink to receive a new frame when necessary. If that transaction is not acked by sink, hardware will trigger this interruption. So let's disable PSR as it is a hint that there is problem with this sink. The removed FIXME was asking to manually train the link but we don't need to do that as by spec sink should do a short pulse when it is out of sync with source, we just need to make sure it is awaken and the SDP header with PSR inactive set it will trigger the short pulse with a error set in the link status. v3: added workarround to fix scheduled work starvation cause by to frequent PSR error interruption v4: only setting irq_aux_error as we don't care in clear it and not using dev_priv->irq_lock as consequence. v5: rebased: using edp_psr_shift() Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181121225441.18785-4-jose.souza@intel.com
2018-11-22drm/i915: Do not enable PSR in the next modeset after a errorJosé Roberto de Souza2-1/+10
When we detect a error and disable PSR, it is kept disabled until the next modeset but as the sink already show signs that it do not properly work with PSR lets disabled it for good to avoid any additional flickering. Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181121225441.18785-3-jose.souza@intel.com
2018-11-22drm/i915: Check PSR errors instead of retrain while PSR is enabledJosé Roberto de Souza3-0/+27
When a PSR error happens sink sets the PSR error register and also set the link status to a error status. So in the short pulse handling it was returning earlier and doing a full detection and attempting to retrain but it fails as PSR HW is in change of the main-link. Just call intel_psr_short_pulse() before intel_dp_needs_link_retrain() is not the right fix as intel_dp_needs_link_retrain() would return true and trigger a full detection while PSR HW is still in change of main-link. Check for PSR active is also not safe as it could be inactive due a frontbuffer invalidate and still doing the PSR exit sequence. v3: added comment in intel_dp_needs_link_retrain() Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181121225441.18785-2-jose.souza@intel.com
2018-11-22drm/i915: Avoid a full port detection in the first eDP short pulseJosé Roberto de Souza1-18/+26
Some eDP panels do not set a valid sink count value and even for the ones that sets is should always be one for eDP, that is why it is not cached in intel_edp_init_dpcd(). But intel_dp_short_pulse() compares the old count with the read one if there is a mistmatch a full port detection will be executed, what was happening in the first short pulse interruption of eDP panels that sets sink count. Instead of just skip the compasison for eDP panels, lets not read the sink count at all for eDP. v2: the previous version of this patch it was caching the sink count in intel_edp_init_dpcd() but I was pointed out by Ville a patch that handled a case of a eDP panel that do not set sink count and as sink count is not used to eDP certification was choosed to just not read it at all. Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181121225441.18785-1-jose.souza@intel.com
2018-11-22drm/i915: Synchronize hpd work in i915_hpd_storm_ctl_show()Lyude Paul1-0/+7
While trying to add a chamelium test for short HPD IRQs, I ran into issues where a hotplug storm would be triggered, but the point at which it would be reported by the kernel would be after igt actually finished checking i915_hpd_storm_ctl's status. So, fix this by simply synchronizing our IRQ work, dig_port_work, and hotplug_work before printing out the HPD storm status in i915_hpd_storm_ctl_show(). Signed-off-by: Lyude Paul <lyude@redhat.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20181121003718.17704-1-lyude@redhat.com
2018-11-22drm/i915: Eliminate the horrendous format check codeVille Syrjälä1-97/+8
Replace the messy framebuffer format/modifier validation code with a single call to drm_any_plane_has_format(). The code was extremely annoying to maintain as you had to have a lot of platform checks for different formats. The new code requires zero maintenance. v2: Nuke the modifier checks as well since the core does that too now v3: Call drm_any_plane_has_format() from the driver code v4: Rebase Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181029183453.28541-2-ville.syrjala@linux.intel.com Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
2018-11-22drm/i915: Update DRIVER_DATE to 20181122Jani Nikula1-1/+1
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2018-11-22drm/prime: Fix drm_gem_prime_mmap() stack useNoralf Trønnes1-11/+20
drivers/gpu/drm/drm_prime.c: In function 'drm_gem_prime_mmap': >> drivers/gpu/drm/drm_prime.c:688:1: warning: the frame size of 1592 bytes is larger than 1024 bytes [-Wframe-larger-than=] Fix by allocating on the heap. Fixes: 7698799f9554 ("drm/prime: Add drm_gem_prime_mmap()") Reported-by: kbuild test robot <lkp@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Christian König <christian.koenig@amd.com> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20181121180215.13881-1-noralf@tronnes.org
2018-11-22drm/i915: Update DRIVER_DATE to 20181122Jani Nikula1-2/+2
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2018-11-22drm/i915: avoid rebuilding i915_gpu_error.o on version string updatesHans Holmberg1-2/+2
There is no need to rebuild i915_gpu_error.o when the version string changes as the version is available in init_utsname()->release. Signed-off-by: Hans Holmberg <hans.holmberg@cnexlabs.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181121095423.20760-1-hans.ml.holmberg@owltronix.com
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.