| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
After the kernel 4.4, the DRM disable flow was changed, if DPI was
disableed before CRTC, it will cause warning message as following:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 1339 at ../../linux/linux-4.4.24-mtk/drivers/gpu/drm/drm_irq.c:1326 drm_wait_one_vblank+0x188/0x18c()
vblank wait timed out on crtc 0
Modules linked in: bridge mt8521p_ir_shim(O) i2c_eeprom(O) mtk_m4(O) fuse_ctrl(O) virtual_block(O) caamkeys(PO) chk(PO) amperctl(O) ledctl(O) apple_auth(PO) micctl(O) sensors(PO) lla(O) sdd(PO) ice40_fpga(O) psmon(O) event_queue(PO) utils(O) blackbox(O)
CPU: 0 PID: 1339 Comm: kworker/0:1 Tainted: P W O 4.4.24 #1
Hardware name: Mediatek Cortex-A7 (Device Tree)
Workqueue: events drm_mode_rmfb_work_fn
[<c001a710>] (unwind_backtrace) from [<c00151e4>] (show_stack+0x20/0x24)
[<c00151e4>] (show_stack) from [<c027961c>] (dump_stack+0x98/0xac)
[<c027961c>] (dump_stack) from [<c002ac54>] (warn_slowpath_common+0x94/0xc4)
[<c002ac54>] (warn_slowpath_common) from [<c002acc4>] (warn_slowpath_fmt+0x40/0x48)
[<c002acc4>] (warn_slowpath_fmt) from [<c03307ac>] (drm_wait_one_vblank+0x188/0x18c)
[<c03307ac>] (drm_wait_one_vblank) from [<c03307d8>] (drm_crtc_wait_one_vblank+0x28/0x2c)
[<c03307d8>] (drm_crtc_wait_one_vblank) from [<c034f48c>] (mtk_drm_crtc_disable+0x78/0x240)
[<c034f48c>] (mtk_drm_crtc_disable) from [<c03240d4>] (drm_atomic_helper_commit_modeset_disables+0x128/0x3b8)
[<c03240d4>] (drm_atomic_helper_commit_modeset_disables) from [<c0350a7c>] (mtk_atomic_complete+0x74/0xb4)
[<c0350a7c>] (mtk_atomic_complete) from [<c0350b24>] (mtk_atomic_commit+0x68/0x98)
[<c0350b24>] (mtk_atomic_commit) from [<c034ab48>] (drm_atomic_commit+0x54/0x74)
[<c034ab48>] (drm_atomic_commit) from [<c0325c4c>] (drm_atomic_helper_set_config+0x7c/0xa0)
[<c0325c4c>] (drm_atomic_helper_set_config) from [<c0338594>] (drm_mode_set_config_internal+0x68/0xe4)
[<c0338594>] (drm_mode_set_config_internal) from [<c033967c>] (drm_framebuffer_remove+0xe4/0x120)
[<c033967c>] (drm_framebuffer_remove) from [<c0339700>] (drm_mode_rmfb_work_fn+0x48/0x58)
[<c0339700>] (drm_mode_rmfb_work_fn) from [<c0043a38>] (process_one_work+0x154/0x50c)
[<c0043a38>] (process_one_work) from [<c0044074>] (worker_thread+0x284/0x568)
[<c0044074>] (worker_thread) from [<c0049dc4>] (kthread+0xec/0x104)
[<c0049dc4>] (kthread) from [<c0010678>] (ret_from_fork+0x14/0x3c)
---[ end trace 12ae5358e992abd5 ]---
so, we add refcount for DPI power on/off to protect the flow.
Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Signed-off-by: chunhui dai <chunhui.dai@mediatek.com>
Signed-off-by: CK Hu <ck.hu@mediatek.com>
|
|
We have new tests and fixes in place since the feature was last
disabled. Try again for gen-9+ hardware and enable only PSR1 by default as
a first step.
v2: Remove typo fix and comment improvements (Rodrigo)
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Jose Roberto de Souza <jose.souza@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
References: commit 2ee7dc497e34 ("drm/i915: disable PSR by default on HSW/BDW")
References: commit dcb2e993f3c0 ("Revert "drm/i915: Enable PSR by default on Valleyview and Cherryview."")
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Tested-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180928061117.12394-1-dhinakaran.pandiyan@intel.com
|
|
During driver load it's considered that the i915_driver_create()
function fails only in case of insufficient memory. Indeed, in
case of failure of i915_driver_create(), the load function
returns indiscriminately -ENOMEM ignoring the real cause of
failure.
In i915_driver_create() get the consistent error value from
drm_dev_init() and embed it in the pointer return value.
Signed-off-by: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20181002092047.14705-1-andi.shyti@intel.com
|
|
Previously we hesitated in adding the hw probe for the actual GPU
frequency for rps_boost as it is quite cumbersome, but given some
surprising HW behaviour it would be useful to know both the RPS boost
state and the actual HW state in one location.
v2: vlv/chv needs more tlc
Reported-by: Tomi Sarvela <tomi.p.sarvela@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181002113221.29208-1-chris@chris-wilson.co.uk
|
|
A few callsites were deciding on using WC or WB maps based on
HAS_LLC(), so replace them with the equivalent helper function
i915_coherent_map_type().
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181001194447.29910-1-chris@chris-wilson.co.uk
|
|
AFBC buffers include additional metadata which increases the required
allocation size. Implement the appropriate size validation and sanity
checking for AFBC buffers.
Added malidp specific function for framebuffer creation. This checks
if the framebuffer has AFBC modifiers and if so, it verifies the
necessary constraints on the size, alignment, offsets and pitch.
Changes from v2:
- Replaced DRM_ERROR() with DRM_DEBUG_KMS() in
malidp_verify_afbc_framebuffer_caps() and malidp_verify_afbc_framebuffer_size()
Signed-off-by: Ayan Kumar halder <ayan.halder@arm.com>
Reviewed-by: Brian Starkey <brian.starkey@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
|
|
Add support for compressed framebuffers that are described using
the framebuffer's modifier field. Mali DP uses the rotation memory for
the decompressor of the format, so we need to check for space when
the modifiers are present.
Signed-off-by: Ayan Kumar Halder <ayan.halder@arm.com>
Reviewed-by: Brian Starkey <brian.starkey@arm.com>
[re-worded commit, rebased, cleaned up duplicated checks for
RGB888 and BGR888 and removed additional parameter for
rotmem_required function hook]
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
|
|
Sergey Suloev reported a crash happening in drm_client_dev_hotplug()
when fbdev had failed to register.
[ 9.124598] vc4_hdmi 3f902000.hdmi: ASoC: Failed to create component debugfs directory
[ 9.147667] vc4_hdmi 3f902000.hdmi: vc4-hdmi-hifi <-> 3f902000.hdmi mapping ok
[ 9.155184] vc4_hdmi 3f902000.hdmi: ASoC: no DMI vendor name!
[ 9.166544] vc4-drm soc:gpu: bound 3f902000.hdmi (ops vc4_hdmi_ops [vc4])
[ 9.173840] vc4-drm soc:gpu: bound 3f806000.vec (ops vc4_vec_ops [vc4])
[ 9.181029] vc4-drm soc:gpu: bound 3f004000.txp (ops vc4_txp_ops [vc4])
[ 9.188519] vc4-drm soc:gpu: bound 3f400000.hvs (ops vc4_hvs_ops [vc4])
[ 9.195690] vc4-drm soc:gpu: bound 3f206000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 9.203523] vc4-drm soc:gpu: bound 3f207000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 9.215032] vc4-drm soc:gpu: bound 3f807000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 9.274785] vc4-drm soc:gpu: bound 3fc00000.v3d (ops vc4_v3d_ops [vc4])
[ 9.290246] [drm] Initialized vc4 0.0.0 20140616 for soc:gpu on minor 0
[ 9.297464] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 9.304600] [drm] Driver supports precise vblank timestamp query.
[ 9.382856] vc4-drm soc:gpu: [drm:drm_fb_helper_fbdev_setup [drm_kms_helper]] *ERROR* Failed to set fbdev configuration
[ 10.404937] Unable to handle kernel paging request at virtual address 00330a656369768a
[ 10.441620] [00330a656369768a] address between user and kernel address ranges
[ 10.449087] Internal error: Oops: 96000004 [#1] PREEMPT SMP
[ 10.454762] Modules linked in: brcmfmac vc4 drm_kms_helper cfg80211 drm rfkill smsc95xx brcmutil usbnet drm_panel_orientation_quirks raspberrypi_hwmon bcm2835_dma crc32_ce pwm_bcm2835 bcm2835_rng virt_dma rng_core i2c_bcm2835 ip_tables x_tables ipv6
[ 10.477296] CPU: 2 PID: 45 Comm: kworker/2:1 Not tainted 4.19.0-rc5 #3
[ 10.483934] Hardware name: Raspberry Pi 3 Model B Rev 1.2 (DT)
[ 10.489966] Workqueue: events output_poll_execute [drm_kms_helper]
[ 10.596515] Process kworker/2:1 (pid: 45, stack limit = 0x000000007e8924dc)
[ 10.603590] Call trace:
[ 10.606259] drm_client_dev_hotplug+0x5c/0xb0 [drm]
[ 10.611303] drm_kms_helper_hotplug_event+0x30/0x40 [drm_kms_helper]
[ 10.617849] output_poll_execute+0xc4/0x1e0 [drm_kms_helper]
[ 10.623616] process_one_work+0x1c8/0x318
[ 10.627695] worker_thread+0x48/0x428
[ 10.631420] kthread+0xf8/0x128
[ 10.634615] ret_from_fork+0x10/0x18
[ 10.638255] Code: 54000220 f9401261 aa1303e0 b4000141 (f9400c21)
[ 10.644456] ---[ end trace c75b4a4b0e141908 ]---
The reason for this is that drm_fbdev_cma_init() removes the drm_client
when fbdev registration fails, but it doesn't remove the client from the
drm_device client list. So the client list now has a pointer that points
into the unknown and we have a 'use after free' situation.
Split drm_client_new() into drm_client_init() and drm_client_add() to fix
removal in the error path.
Fixes: 894a677f4b3e ("drm/cma-helper: Use the generic fbdev emulation")
Reported-by: Sergey Suloev <ssuloev@orpaltech.com>
Cc: Stefan Wahren <stefan.wahren@i2se.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181001194536.57756-1-noralf@tronnes.org
|
|
Mali-DP650 supports warming up the SMMU translations, by sending
requsts to the SMMU before a buffer is read.
There are two modes supported:
- PARTIAL: could be enabled when the buffer is composed of 4K or 64K
pages, the display hardware will send a configurable number of
requests before the actual reading.
- FULL: could be enabled when the buffer is composed of 1M or 2M
pages, the display hardware will send requests before reading for
all pages composing the buffer.
This patch adds a mechanism for detecting the page size and set the
MMU prefetch mode if possible.
Changes since v1:
- For imported buffers use the already populated
drm_gem_cma_object.sgt instead of calling
driver.gem_prime_get_sg_table, which works just for buffers
allocated through the gem_cma API.
Signed-off-by: Jamie Fox <jamie.fox@arm.com>
Signed-off-by: Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
[rebased and re-ordered functions]
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
|
|
Checks the pixel blending mode and plane alpha value when
do the plane_check. Mali DP supports blending the current plane
with the background either based on the pixel alpha blending
mode or by using the layer's alpha value, but not both at the
same time. If both case, plane_check will return failed.
Sets the HW when doing plane_update accordingly. If plane alpha
is the 0xffff, set the pixel blending bits accordingly. If not
we'd set ALPHA bit as zero and layer alpha value.
Changes since v1:
- Introduces to use it in the malidp driver, which depends on
the plane alpha patch
Changes since v2:
- Refines the comments of drm/mali-dp patchset
Changes since v3:
- Adds hardware limitation check
Changes since v4:
- Updates on drm/malidp, hardware limitation check only when
the format has alpha pixel.
- Rebases on drm-misc-next.
Signed-off-by: Lowry Li <lowry.li@arm.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
|
|
Smart layer enable rectangles is set to 1 when the driver is probed,
however when doing pm_suspend the value is lost and it's not set again
making the SMART_LAYER unusable, fix that by initializing the number
of rectangles everytime we do a plane update.
Signed-off-by: Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
|
|
When we want to writeback to memory in NV12 format we need to program
the RGB2YUV coefficients. Currently, we don't program the coefficients
and NV12 doesn't work at all.
This patchset fixes that by programming a sane default(bt709, limited
range) as rgb2yuv coefficients.
In the long run, probably we need to think of a way for userspace to
be able to program that, but for now I think this is better than not
working at all or not advertising NV12 as a supported format for
memwrite.
Changes since v1:
- Write the rgb2yuv coefficients only once, since we don't change
them at all, just write them the first time NV12 is programmed,
suggested by Brian Starkey, here [1]
[1] https://lists.freedesktop.org/archives/dri-devel/2018-August/186819.html
Signed-off-by: Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
|
|
Currently, if userspace calls drm_wait_vblank before the crtc is
activated the crtc vblank_enable hook is called, which in case of
malidp driver triggers some warninngs. This happens because on
device init we don't inform the drm core about the vblank state
by calling drm_crtc_vblank_on/off/reset which together with
drm_vblank_get have some magic that prevents calling drm_vblank_enable
when crtc is off.
Signed-off-by: Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
|
|
Add plane alpha blending support with the different blend modes.
This has been tested on a icl to show the correct results,
on earlier platforms small rounding errors cause issues. But this
already happens case with fully transparant or fully opaque RGB8888
fb's.
The recommended HW workaround is to disable alpha blending when the
plane alpha is 0 (transparant, hide plane) or 0xff (opaque, disable blending).
This is easy to implement on any platform, so just do that.
The tests for userspace are also available, and pass on gen11.
Changes since v1:
- Change mistaken < 0xff0 to 0xff00.
- Only set PLANE_KEYMSK_ALPHA_ENABLE when plane alpha < 0xff00, ignore blend mode.
- Rework disabling FBC when per pixel alpha is used.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
[mlankhorst: Change MISSING_CASE default to explicit alpha disable (mattrope)]
Link: https://patchwork.freedesktop.org/patch/msgid/20180815103405.22679-1-maarten.lankhorst@linux.intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
|
|
As DMC Package contain DMC FW for multiple steppings including default
stepping. This patch will help to load FW for that particular stepping,
if FW for that stepping is available, instead of loading default FW.
v2 : Fix formatting issue.
Signed-off-by: Jyoti Yadav <jyoti.r.yadav@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1536169347-31326-1-git-send-email-jyoti.r.yadav@intel.com
|
|
fd_install() moves the reference given to it into the file descriptor table
of the current process. If the current process is multithreaded, then
immediately after fd_install(), another thread can close() the file
descriptor and cause the file's resources to be cleaned up.
Since the reference to "lessee" is held by the file, we must not access
"lessee" after the fd_install() call.
As far as I can tell, to reach this codepath, the caller must have an open
file descriptor to a DRI device in master mode. I'm not sure what the
requirements for that are.
Signed-off-by: Jann Horn <jannh@google.com>
Fixes: 62884cd386b8 ("drm: Add four ioctls for managing drm mode object leases [v7]")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181001153117.216923-1-jannh@google.com
|
|
omap_connector_destroy() does:
kfree(omap_connector);
omapdss_device_put(omap_connector->output);
omapdss_device_put(omap_connector->display);
Fix this by moving the kfree after the omapdss_device_puts.
This bug was introduced in 949ea2ef3fed4e1d0f9b80ec21ed81a9833ac248
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
This patch unifies the naming of DRM functions for reference counting
of struct drm_device. The resulting code is more aligned with the rest
of the Linux kernel interfaces.
Signed-off-by: Thomas Zimmermann <tdz@users.sourceforge.net>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
|
|
This patch unifies the naming of DRM functions for reference counting
of struct drm_gem_object. The resulting code is more aligned with the
rest of the Linux kernel interfaces.
Signed-off-by: Thomas Zimmermann <tdz@users.sourceforge.net>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
|
|
This patch unifies the naming of DRM functions for reference counting
of struct drm_gem_object. The resulting code is more aligned with the
rest of the Linux kernel interfaces.
Signed-off-by: Thomas Zimmermann <tdz@users.sourceforge.net>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
|
|
drm_format_info table has a field 'is_yuv' to denote if the format
is yuv or not. The driver is expected to use this instead of
having a function for the same purpose.
Signed-off-by: Ayan Kumar halder <ayan.halder@arm.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
|
|
Errata i878 says that MPU should not be used to access RAM and DMM at
the same time. As it's not possible to prevent MPU accessing RAM, we
need to access DMM via a proxy.
This patch changes DMM driver to access DMM registers via sDMA. Instead
of doing a normal readl/writel call to read/write a register, we use
sDMA to copy 4 bytes from/to the DMM registers.
This patch provides only a partial workaround for i878, as not only DMM
register reads/writes are affected, but also accesses to the DMM mapped
buffers (framebuffers, usually).
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
|
|
The interrupts should be enabled after the driver initialization to avoid
early interrupts while the driver is not yet ready to handle them.
On removal the interrupts must be disabled before other resources are
released, freed up.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
|
|
The driver probe would fail if the irq is not available.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
|
|
A DMM timeout "timed out waiting for done" has been observed on DRA7
devices. The timeout happens rarely, and only when the system is under
heavy load.
Debugging showed that the timeout can be made to happen much more
frequently by optimizing the DMM driver, so that there's almost no code
between writing the last DMM descriptors to RAM, and writing to DMM
register which starts the DMM transaction.
The current theory is that a wmb() does not properly ensure that the
data written to RAM is observable by all the components in the system.
This DMM timeout has caused interesting (and rare) bugs as the error
handling was not functioning properly (the error handling has been fixed
in previous commits):
* If a DMM timeout happened when a GEM buffer was being pinned for
display on the screen, a timeout error would be shown, but the driver
would continue programming DSS HW with broken buffer, leading to
SYNCLOST floods and possible crashes.
* If a DMM timeout happened when other user (say, video decoder) was
pinning a GEM buffer, a timeout would be shown but if the user
handled the error properly, no other issues followed.
* If a DMM timeout happened when a GEM buffer was being released, the
driver does not even notice the error, leading to crashes or hang
later.
This patch adds wmb() and readl() calls after the last bit is written to
RAM, which should ensure that the execution proceeds only after the data
is actually in RAM, and thus observable by DMM.
The read-back should not be needed. Further study is required to understand
if DMM is somehow special case and read-back is ok, or if DRA7's memory
barriers do not work correctly.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
|
|
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/gpu/drm/omapdrm/dss/dispc.c: In function 'dispc_ovl_setup_common':
drivers/gpu/drm/omapdrm/dss/dispc.c:2627:19: warning:
variable 'frame_height' set but not used [-Wunused-but-set-variable]
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
|
|
We prefer to use ERR_CAST to do so.
The issue is detected with the help of Coccinelle.
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
|
|
tcm-sita.h is unused since commit 0d6fa53fd805 ("drm/omap: Use bitmaps for TILER placement")
Let's remove it.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
|
|
Use the drm_display_mode_to_videomode function to calculate front/
back porches and sync length.
Cc: Madhur Verma <madhur.verma@samsung.com>
Cc: Hemanshu Srivastava <hemanshu.s@samsung.com>
Signed-off-by: Satendra Singh Thakur <satendra.t@samsung.com>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180926204150.29829-2-stefan@agner.ch
|
|
The result of drm_crtc_index() is unused. Remove the call and
the unused variable.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180926204150.29829-1-stefan@agner.ch
|
|
Latency is in the eye of the beholder. In the case where a client stops
and waits for the gpu, give that request chain a small priority boost
(not so that it overtakes higher priority clients, to preserve the
external ordering) so that ideally the wait completes earlier.
v2: Tvrtko recommends to keep the boost-from-user-stall as small as
possible and to allow new client flows to be preferred for interactivity
over stalls.
Testcase: igt/gem_sync/switch-default
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Dmitry Rogozhkin <dmitry.v.rogozhkin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181001144755.7978-3-chris@chris-wilson.co.uk
|
|
Currently, the backend scheduling code abuses struct_mutex into order to
have a global lock to manipulate a temporary list (without widespread
allocation) and to protect against list modifications. This is an
extraneous coupling to struct_mutex and further can not extend beyond
the local device.
Pull all the code that needs to be under the one true lock into
i915_scheduler.c, and make it so.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181001144755.7978-2-chris@chris-wilson.co.uk
|
|
Taken from an idea used for FQ_CODEL, we give the first request of a
new request flows a small priority boost. These flows are likely to
correspond with short, interactive tasks and so be more latency sensitive
than the longer free running queues. As soon as the client has more than
one request in the queue, further requests are not boosted and it settles
down into ordinary steady state behaviour. Such small kicks dramatically
help combat the starvation issue, by allowing each client the opportunity
to run even when the system is under heavy throughput load (within the
constraints of the user selected priority).
v2: Mark the preempted request as the start of a new flow, to prevent a
single client being continually gazumped by its peers.
Testcase: igt/benchmarks/rrul
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181001144755.7978-1-chris@chris-wilson.co.uk
|
|
Make life simpler by passing around intel_encoder instead of
drm_encoder.
@r1@
identifier F =~ "infoframe";
identifier I, M;
@@
F(
- struct drm_encoder *I
+ struct intel_encoder *I
, ...)
{
<...
(
- I->M
+ I->base.M
|
- I
+ &I->base
)
...>
}
@r2@
identifier F =~ "infoframe";
identifier I;
type T, ST;
@@
ST {
...
T (*F)(
- struct drm_encoder *I
+ struct intel_encoder *encoder
, ...);
...
};
@@
identifier r1.F;
expression E;
@@
F(
- E
+ to_intel_encoder(E)
,...)
@@
identifier r2.F;
expression E, X;
@@
(
X.F(
- E
+ to_intel_encoder(E)
,...)
|
X->F(
- E
+ to_intel_encoder(E)
,...)
)
@@
expression E;
@@
(
- to_intel_encoder(&E->base)
+ E
|
- to_intel_encoder(&E->base.base)
+ &E->base
)
@@
identifier D, M;
expression E;
@@
D = enc_to_dig_port(&E->base)
<...
(
- D->base.M
+ E->M
|
- &D->base
+ E
)
...>
@@
identifier D;
expression E;
type T;
@@
- T D = enc_to_dig_port(E);
... when != D
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180920185145.1912-10-ville.syrjala@linux.intel.com
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Replace the hand rolled memmove() with the real thing.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180920185145.1912-9-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
/kisskb/src/drivers/gpu/drm/i915/i915_irq.c: warning: 'gu_misc_iir' may be used uninitialized in this function [-Wuninitialized]: => 3120:10
Silence the compiler warning by ensuring that the local variable is
initialised and removing the guard that is confusing the older gcc.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Fixes: df0d28c185ad ("drm/i915/icl: GSE interrupt moves from DE_MISC to GU_MISC")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180926104718.17462-1-chris@chris-wilson.co.uk
(cherry picked from commit 7a90938332d80faf973fbcffdf6e674e7b8f0914)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Let us reuse the already defined has_csr check and not
redefine it.
The main difference is that in effect this will flip .has_csr to 1
(via GEN9_FEATURES which GEN11_FEATURES pulls in).
Suggested-by: Imre Deak <imre.deak@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=107382
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1534527210-16841-1-git-send-email-anusha.srivatsa@intel.com
(cherry picked from commit da4468a1aa75457e6134127b19761b7ba62ce945)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
As we are about to allow ourselves to slightly bump the user priority
into a few different sublevels, packthose internal priority lists
into the same i915_priolist to keep the rbtree compact and avoid having
to allocate the default user priority even after the internal bumping.
The downside to having an requests[] rather than a node per active list,
is that we then have to walk over the empty higher priority lists. To
compensate, we track the active buckets and use a small bitmap to skip
over any inactive ones.
v2: Use MASK of internal levels to simplify our usage.
v3: Prevent overflow when SHIFT is zero.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181001123204.23982-4-chris@chris-wilson.co.uk
|
|
In the next few patches, we will want to give a small priority boost to
some requests/queues but not so much that we perturb the user controlled
order. As such we will shift the user priority bits higher leaving
ourselves a few low priority bits for our internal bumping.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181001123204.23982-3-chris@chris-wilson.co.uk
|
|
Include a batch full of a page of arbitration points in order to provide
a window for inject_preempt_context() in the preemption smoketests.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181001123204.23982-2-chris@chris-wilson.co.uk
|
|
When submitting chains to each engine, we can do so (mostly) in
parallel, so delegate submission to threads on a per-engine basis.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181001123204.23982-1-chris@chris-wilson.co.uk
|
|
convert drm_atomic_helper_suspend/resume() to use
drm_mode_config_helper_suspend/resume().
saved_state in tilcdc_drm_private will not be used
anymore, so it can be removed.
Signed-off-by: Ajit Negi <ajitn.linux@gmail.com>
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Tested-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Jyri Sarha <jsarha@ti.com>
|
|
In preparation to remove the node name pointer from struct device_node,
convert printf users to use the %pOFn format specifier.
For drm_modes.c, the full node path is already printed out, so printing
just the node name a 2nd time is redundant and can be removed.
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Acked-by: Rob Clark <robdclark@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180928225044.20132-1-robh@kernel.org
|
|
This patch unifies the naming of DRM functions for reference counting
of struct drm_gem_object. The resulting code is more aligned with the
rest of the Linux kernel interfaces.
v2:
* rebase onto fbdev rework
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20180926113623.22679-1-tzimmermann@suse.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
The mixer hardware supports variable plane alpha. Currently planes are
opaque, make this configurable.
Tested on Odroid-U3 with Exynos 4412 CPU, kernel next-20180913
using modetest.
Signed-off-by: Christoph Manszewski <c.manszewski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
The mixer hardware supports both premultiplied alpha and
non-premultiplied alpha. Currently premultiplied alpha is default, make
this configurable.
Tested on Odroid-U3 with Exynos 4412 CPU, kernel next-20180913
using modetest.
Signed-off-by: Christoph Manszewski <c.manszewski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
Make use of helper functions in exynos_drm_plane_reset in order to set
all default values. Currently alpha isn't set during reset.
Signed-off-by: Christoph Manszewski <c.manszewski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
Instead of allocating a fake IOMMU domain for all Exynos DRM components,
simply reuse the default IOMMU domain of the already selected DMA device.
This allows some design changes in IOMMU framework without breaking IOMMU
support in Exynos DRM.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
Add support for 16x16 tiled NV12 and NV21 formats.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
Add support for 16x16 tiled formats: NV12/NV21, YUYV and YUV420.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Fixed line over 80 characters warning
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
chunhui dai
Dhinakaran Pandiyan
Andi Shyti
Chris Wilson
Ayan Kumar Halder
Liviu Dudau
Noralf Trønnes
Jamie Fox
Lowry Li
Alexandru Gheorghe
Maarten Lankhorst
Jyoti Yadav
Jann Horn
Tomi Valkeinen
Thomas Zimmermann
Peter Ujfalusi
YueHaibing
zhong jiang
Corentin Labbe
Satendra Singh Thakur
Stefan Agner
Ville Syrjälä
Anusha Srivatsa
Souptick Joarder
Rob Herring
Thomas Zimmermann
Christoph Manszewski
Marek Szyprowski
Andrzej Pietrasiewicz