aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/gpu
AgeCommit message (Collapse)AuthorFilesLines
2018-09-10drm/amdgpu: correctly sign extend 48bit addresses v3Christian König9-32/+44
Correct sign extend the GMC addresses to 48bit. v2: sign extending turned out easier than thought. v3: clean up the defines and move them into amdgpu_gmc.h as well Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-10drm/amdgpu: improve VM state machine documentation v2Christian König1-32/+109
Since we have a lot of FAQ on the VM state machine try to improve the documentation by adding functions for each state move. v2: fix typo in amdgpu_vm_bo_invalidated, use amdgpu_vm_bo_relocated in one more place as well. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-10drm/amdgpu: fix amdgpu_mn_unlock() in the CS error pathChristian König1-1/+1
Avoid unlocking a lock we never locked. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-10drm/amdgpu: separate per VM BOs from normal in the moved stateChristian König2-36/+38
Allows us to avoid taking the spinlock in more places. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-10drm/amdgpu: move size calculations to the front of the file againChristian König1-45/+45
amdgpu_vm_bo_* functions should come much later. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-10drm/amd/powerplay: correct data type to support under voltageEvan Quan1-3/+3
For under voltage, negative value will be applied to voltage offset. Update the data type to cover this case. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-10drm/amd/powerplay: added vega20 overdrive support V3Evan Quan3-1/+335
Added vega20 overdrive support based on existing OD sysfs APIs. However, the OD logics are simplified on vega20. So, the behavior will be a little different and works only on some limited levels. V2: fix typo fix commit description revise error logs add support for clock OD V3: separate clock from voltage OD settings Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-11Merge tag 'drm-intel-next-2018-09-06-2' of git://anongit.freedesktop.org/drm/drm-intel into drm-nextDave Airlie85-1796/+3824
Merge tag 'gvt-next-2018-09-04' drm-intel-next-2018-09-06-1: UAPI Changes: - GGTT coherency GETPARAM: GGTT has turned out to be non-coherent for some platforms, which we've failed to communicate to userspace so far. SNA was modified to do extra flushing on non-coherent GGTT access, while Mesa will mitigate by always requiring WC mapping (which is non-coherent anyway). - Neuter Resource Streamer uAPI: There never really were users for the feature, so neuter it while keeping the interface bits for compatibility. This is a long due item from past. Cross-subsystem Changes: - Backmerge of branch drm-next-4.19 for DP_DPCD_REV_14 changes Core Changes: - None Driver Changes: - A load of Icelake (ICL) enabling patches (Paulo, Manasi) - Enabled full PPGTT for IVB,VLV and HSW (Chris) - Bugzilla #107113: Distribute DDB based on display resolutions (Mahesh) - Bugzillas #100023,#107476,#94921: Support limited range DP displays (Jani) - Bugzilla #107503: Increase LSPCON timeout (Fredrik) - Avoid boosting GPU due to an occasional stall in interactive workloads (Chris) - Apply GGTT coherency W/A only for affected systems instead of all (Chris) - Fix for infinite link training loop for faulty USB-C MST hubs (Nathan) - Keep KMS functional on Gen4 and earlier when GPU is wedged (Chris) - Stop holding ppGTT reference from closed VMAs (Chris) - Clear error registers after error capture (Lionel) - Various Icelake fixes (Anusha, Jyoti, Ville, Tvrtko) - Add missing Coffeelake (CFL) PCI IDs (Rodrigo) - Flush execlists tasklet directly from reset-finish (Chris) - Fix LPE audio runtime PM (Chris) - Fix detection of out of range surface positions (GLK/CNL) (Ville) - Remove wait-for-idle for PSR2 (Dhinakaran) - Power down existing display hardware resources when display is disabled (Chris) - Don't allow runtime power management if RC6 doesn't exist (Chris) - Add debugging checks for runtime power management paths (Imre) - Increase symmetry in display power init/fini paths (Imre) - Isolate GVT specific macros from i915_reg.h (Lucas) - Increase symmetry in power management enable/disable paths (Chris) - Increase IP disable timeout to 100 ms to avoid DRM_ERROR (Imre) - Fix memory leak from HDMI HDCP write function (Brian, Rodrigo) - Reject Y/Yf tiling on interlaced modes (Ville) - Use a cached mapping for the physical HWS on older gens (Chris) - Force slow path of writing relocations to buffer if unable to write to userspace (Chris) - Do a full device reset after being wedged (Chris) - Keep forcewake counts over reset (in case of debugfs user) (Imre, Chris) - Avoid false-positive errors from power wells during init (Imre) - Reset engines forcibly in exchange of declaring whole device wedged (Mika) - Reduce context HW ID lifetime in preparation for Icelake (Chris) - Attempt to recover from module load failures (Chris) - Keep select interrupts over a reset to avoid missing/losing them (Chris) - GuC submission backend improvements (Jakub) - Terminate context images with BB_END (Chris, Lionel) - Make GCC evaluate GGTT view struct size assertions again (Ville) - Add selftest to exercise suspend/hibernate code-paths for GEM (Chris) - Use a full emulation of a user ppgtt context in selftests (Chris) - Exercise resetting in the middle of a wait-on-fence in selftests (Chris) - Fix coherency issues on selftests for Baytrail (Chris) - Various other GEM fixes / self-test updates (Chris, Matt) - GuC doorbell self-tests (Daniele) - PSR mode control through debugfs for IGTs (Maarten) - Degrade expected WM latency errors to DRM_DEBUG_KMS (Chris) - Cope with errors better in MST link training (Dhinakaran) - Fix WARN on KBL external displays (Azhar) - Power well code cleanups (Imre) - Fixes to PSR debugging (Dhinakaran) - Make forcewake errors louder for easier catching in CI (WARNs) (Chris) - Fortify tiling code against programmer errors (Chris) - Bunch of fixes for CI exposed corner cases (multiple authors, mostly Chris) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180907105446.GA22860@jlahtine-desk.ger.corp.intel.com
2018-09-10drm: udl: Destroy framebuffer only if it was initializedEmil Lundmark1-3/+5
This fixes a NULL pointer dereference that can happen if the UDL driver is unloaded before the framebuffer is initialized. This can happen e.g. if the USB device is unplugged right after it was plugged in. As explained by Stéphane Marchesin: It happens when fbdev is disabled (which is the case for Chrome OS). Even though intialization of the fbdev part is optional (it's done in udlfb_create which is the callback for fb_probe()), the teardown isn't optional (udl_driver_unload -> udl_fbdev_cleanup -> udl_fbdev_destroy). Note that udl_fbdev_cleanup *tries* to be conditional (you can see it does if (!udl->fbdev)) but that doesn't work, because udl->fbdev is always set during udl_fbdev_init. Cc: stable@vger.kernel.org Suggested-by: Sean Paul <seanpaul@chromium.org> Reviewed-by: Sean Paul <seanpaul@chromium.org> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Emil Lundmark <lndmrk@chromium.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180528142711.142466-1-lndmrk@chromium.org Signed-off-by: Sean Paul <seanpaul@chromium.org>
2018-09-10drm/sun4i: Remove R40 display pipeline compatiblesChen-Yu Tsai3-26/+0
Two patches from the R40 display pipeline support series weren't applied with the rest of the series. When they did get applied, the -rc6 deadline for drm-misc-next had past, so they didn't get into 4.19-rc1 with the rest of the series. However, the two patches are crucial in the parsing of the R40's display pipeline graph in the device tree. Without them, the driver crashes because it can't follow the odd graph structure. This patch removes the R40 compatibles from the sun4i-drm driver, effectively disabling DRM support for the R40 for one release cycle. This will prevent the driver from crashing upon probing. The compatibles should be reinstated for the next release. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180827083950.602-1-wens@csie.org Signed-off-by: Sean Paul <seanpaul@chromium.org>
2018-09-10drm/pl111: Make sure of_device_id tables are NULL terminatedzhong jiang1-1/+2
We prefer to of_device_id tables are NULL terminated. So make vexpress_muxfpga_match is NULL terminated. Signed-off-by: zhong jiang <zhongjiang@huawei.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/1533379767-15629-1-git-send-email-zhongjiang@huawei.com Signed-off-by: Sean Paul <seanpaul@chromium.org>
2018-09-10drm/vc4: Fix the "no scaling" case on multi-planar YUV formatsBoris Brezillon1-13/+12
When there's no scaling requested ->is_unity should be true no matter the format. Also, when no scaling is requested and we have a multi-planar YUV format, we should leave ->y_scaling[0] to VC4_SCALING_NONE and only set ->x_scaling[0] to VC4_SCALING_PPF. Doing this fixes an hardly visible artifact (seen when using modetest and a rather big overlay plane in YUV420). Fixes: fc04023fafec ("drm/vc4: Add support for YUV planes.") Cc: <stable@vger.kernel.org> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20180725122907.13702-1-boris.brezillon@bootlin.com Signed-off-by: Sean Paul <seanpaul@chromium.org>
2018-09-10Merge tag 'gvt-fixes-2018-09-10' of https://github.com/intel/gvt-linux into drm-intel-fixesRodrigo Vivi2-13/+17
gvt-fixes-2018-09-10 - KVM mm access reference fix (Zhenyu) - Fix child device config length for virtual opregion (Weinan) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> From: Zhenyu Wang <zhenyuw@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180910092212.GZ20737@zhen-hp.sh.intel.com
2018-09-10drm/i915/guc: Update GuC power domain statesMichal Wajdeczko1-0/+4
We should update GuC power domain states also when GuC submission is disabled, otherwise GuC might complain or ignore our requests. This seems to be required for all currently released GuC firmwares. v2: it is only needed by pre-Gen11 firmwares Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: John Spotswood <john.a.spotswood@intel.com> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Cc: Tomasz Lis <tomasz.lis@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20180910104150.101752-1-michal.wajdeczko@intel.com
2018-09-10drm/i915/bdw: Increase IPS disable timeout to 100msImre Deak1-2/+6
During IPS disabling the current 42ms timeout value leads to occasional timeouts, increase it to 100ms which seems to get rid of the problem. References: https://bugs.freedesktop.org/show_bug.cgi?id=107494 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107562 Reported-by: Diego Viola <diego.viola@gmail.com> Tested-by: Diego Viola <diego.viola@gmail.com> Cc: Diego Viola <diego.viola@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180905100005.7663-1-imre.deak@intel.com (cherry picked from commit acb3ef0ee40ea657280a4a11d9f60eb2937c0dca) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-09-10drm/rockchip: Allow driver to be shutdown on reboot/kexecMarc Zyngier1-0/+6
Leaving the DRM driver enabled on reboot or kexec has the annoying effect of leaving the display generating transactions whilst the IOMMU has been shut down. In turn, the IOMMU driver (which shares its interrupt line with the VOP) starts warning either on shutdown or when entering the secondary kernel in the kexec case (nothing is expected on that front). A cheap way of ensuring that things are nicely shut down is to register a shutdown callback in the platform driver. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Tested-by: Vicente Bergas <vicencb@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20180805124807.18169-1-marc.zyngier@arm.com Cc: stable@vger.kernel.org
2018-09-10drm/fb-helper: improve documentation and print warningsPeter Wu1-6/+18
Clarify the relation between drm_fb_helper_fbdev_setup/teardown. Clarify requirements for the new generic fbdev emulation API and log some more details in case the driver does something wrong. Fix related typos. Cc: Noralf Trønnes <noralf@tronnes.org> Signed-off-by: Peter Wu <peter@lekensteyn.nl> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20180906221810.20170-5-peter@lekensteyn.nl Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-09-10bochs: convert to drm_dev_registerPeter Wu3-8/+30
The drm_get_pci_dev API is deprecated, replace it by drm_dev_register. Signed-off-by: Peter Wu <peter@lekensteyn.nl> Link: http://patchwork.freedesktop.org/patch/msgid/20180906221810.20170-4-peter@lekensteyn.nl Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-09-10bochs: convert to drm_fb_helper_fbdev_setup/teardownPeter Wu4-157/+22
Currently unloading bochs_drm (after unbinding the vtconsole) results in a warning about a leaked connector: [drm:drm_mode_config_cleanup] *ERROR* connector Virtual-3 leaked! While investigating a potential fix I noticed that a lot of open-coded functionality is already implemented elsewhere, so start converting it: bochs_fbdev_init -> drm_fb_helper_fbdev_setup: trivial (similar impl). bochs_fbdev_fini -> drm_fb_helper_fbdev_teardown: requires unembedding "struct drm_framebuffer" from "struct bochs_framebuffer". Unembedding drm_framebuffer is made easy using drm_gem_fbdev_fb_create which can replace bochs_fbdev_destroy and custom routines in bochs_mm.c. For this to work, the GEM object is moved into "drm_framebuffer". After that, "bochs_framebuffer" is no longer needed and therefore removed. Remove the unused "size" and "initialized" fields from fb, the latter is not necessary as drm_fb_helper_fbdev_teardown can be called even if bochsfb_create fails. This theory was tested by returning early and late (just before drm_gem_fbdev_fb_create). Both scenarios fail gracefully although the latter seems to leak the object from bochsfb_create_object (not a regression). Guess on the reason for the encoder leak: drm_framebuffer_cleanup was previously used, but did not destroy much. drm_fb_helper_fbdev_teardown is now used and calls drm_framebuffer_remove which does a bit more work. Tested with 'echo 0 > /sys/class/vtconsole/vtcon1/bind; rmmod bochs_drm' and also with Xorg + fbdev (startx -> xterm). The latter triggered a warning in ttm_bo_vm_open that existed before, see https://lkml.kernel.org/r/1464000533-13140-4-git-send-email-mstaudt@suse.de Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Peter Wu <peter@lekensteyn.nl> Link: http://patchwork.freedesktop.org/patch/msgid/20180906221810.20170-3-peter@lekensteyn.nl Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-09-10bochs: use drm_fb_helper_set_suspend_unlocked in suspend/resumePeter Wu1-10/+2
The "initialized" member is going away. suspend/resume still works (even if bochsfb_create is forced to fail). Signed-off-by: Peter Wu <peter@lekensteyn.nl> Link: http://patchwork.freedesktop.org/patch/msgid/20180906221810.20170-2-peter@lekensteyn.nl Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-09-10drm: refuse ADDFB2 ioctl for broken bigendian driversGerd Hoffmann3-3/+29
Drivers must set the quirk_addfb_prefer_host_byte_order quirk to make the drm_mode_addfb() compat code work correctly on bigendian machines. If they don't they interpret pixel_format values incorrectly for bug compatibility, which in turn implies the ADDFB2 ioctl does not work correctly then. So block it to make userspace fallback to ADDFB. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20180907073213.20410-1-kraxel@redhat.com
2018-09-10drm/virtio: Remove set but not used variable 'bo'YueHaibing1-3/+0
Fixes gcc '-Wunused-but-set-variable' warning: drivers/gpu/drm/virtio/virtgpu_display.c: In function 'virtio_gpu_framebuffer_init': drivers/gpu/drm/virtio/virtgpu_display.c:78:28: warning: variable 'bo' set but not used [-Wunused-but-set-variable] struct virtio_gpu_object *bo; ^ Signed-off-by: YueHaibing <yuehaibing@huawei.com> Link: http://patchwork.freedesktop.org/patch/msgid/1536285837-150460-1-git-send-email-yuehaibing@huawei.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-09-09drm: extract drm_atomic_uapi.cDaniel Vetter15-1358/+1415
This leaves all the commit/check and state handling in drm_atomic.c, while pulling all the uapi glue and the huge ioctl itself into a seprate file. This seems to almost perfectly split the rather big drm_atomic.c file into 2 equal sizes. Also adjust the kerneldoc and type a very terse overview text. v2: Rebase. v3: Fix tiny typo. v4: - Fixup armada, newly converted atomic driver hooray! - Fixup msm/dpu1, newly added too. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: David Airlie <airlied@linux.ie> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Eric Anholt <eric@anholt.net> Cc: intel-gfx@lists.freedesktop.org Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180905135711.28370-7-daniel.vetter@ffwll.ch
2018-09-09drm/atomic: trim driver interface/docsDaniel Vetter1-185/+34
Remove the kerneldoc and EXPORT_SYMBOL which aren't used and really shouldn't ever be used by drivers directly. Unfortunately this means we need to move the set_writeback_fb function around to avoid a forward decl. Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: David Airlie <airlied@linux.ie> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180905135711.28370-5-daniel.vetter@ffwll.ch
2018-09-09drm: drop drmP.h include from drm_crtc.cDaniel Vetter1-1/+4
This is starting to become easy! v2: Compiles now, with drm/drm_util.h extracted. v3: Fix up commit message (Sam Ravnborg) Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180905135711.28370-4-daniel.vetter@ffwll.ch
2018-09-09drm: drop drmP.h include from drm_plane.cDaniel Vetter2-1/+18
Just a bit of missing includes and pre declarations. v2: Compiles now, with drm/drm_util.h extracted. v3: Rebase v3: Fix up commit message (Sam Ravnborg) Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180905135711.28370-3-daniel.vetter@ffwll.ch
2018-09-09drm: Drop drmP.h from drm_connector.cDaniel Vetter2-1/+10
Only needed minimal changes in drm_internal.h (for the drm_ioctl_t type and a few forward declarations), plus a few missing includes in drm_connector.c. Yay, the last stage of the drm header cleanup can finally commence! v2: Compiles now, with drm/drm_util.h extracted. v3: Fix up commit message (Sam Ravnborg) Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180905135711.28370-2-daniel.vetter@ffwll.ch
2018-09-09drm: Add drm/drm_util.h header fileDaniel Vetter4-0/+7
We have a bunch of neat little macros all over the place which should move to kernel.h. But some of them died in bikesheds on lkml, and we need a decent home for them. Start out by moving the for_each_if macro there. v2: Rename to drm_util.h instead (Dave&Sean) Cc: Sean Paul <seanpaul@chromium.org> Acked-by: Sean Paul <seanpaul@chromium.org> Cc: Dave Airlie <airlied@gmail.com> Acked-by: Dave Airlie <airlied@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20180905135711.28370-1-daniel.vetter@ffwll.ch
2018-09-07drm/i915: Missed interrupt simulation is no more, tell the worldChris Wilson1-0/+11
Using the guc, we cannot disable the user interrupt generation as we use it for driving submission. And from Icelake, we no longer have the ability to individually mask interrupt generation from each engine, disabling our ability to fake missed interrupts. In both cases, report back to userspace that the missed interrupt generator is no longer available. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180907112856.28242-1-chris@chris-wilson.co.uk
2018-09-07drm/sun4i: tcon: Add dithering support for RGB565/RGB666 LCD panelsJonathan Liu1-0/+61
The hardware supports dithering on TCON channel 0 which is used for LCD panels. Dithering is a method of approximating a color from a mixture of other colors when the required color isn't available. It reduces color banding artifacts that can be observed when displaying gradients (e.g. grayscale gradients). This may occur when the image that needs to be displayed is 24-bit but the LCD panel is a lower bit depth and does not perform dithering on its own. Signed-off-by: Jonathan Liu <net147@gmail.com> [wens@csie.org: check display_info.bpc first; handle LVDS and MIPI DSI] Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180907041948.19913-4-wens@csie.org
2018-09-07drm/sun4i: tcon: Rename Dithering related register macrosChen-Yu Tsai1-11/+14
Dithering is only supported for TCON channel 0. Throughout the datasheet all the names associated with these register are prefixed "TCON0", instead of "TCON". The only exception is the control register "TCON_FRM_CTL_REG". Rename the macros to reflect this. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180907041948.19913-3-wens@csie.org
2018-09-07drm/sun4i: tcon: Pass drm_encoder * into sun4i_tcon0_mode_set_cpuChen-Yu Tsai1-9/+6
sun4i_tcon0_mode_set_cpu() currently accepts struct mipi_dsi_device * as its second parameter. This is derived from drm_encoder. The DSI encoder is tied to the CPU interface mode of the TCON as a special case. In theory, if hardware were available, we could also support normal CPU interface modes. It is better to pass the generic encoder instead of the specialized mipi_dsi_device, and handle the differences inside the function. Passing the encoder would also enable the function to pass it, or any other data structures related to it, to other functions expecting it. One such example would be dithering support that will be added in a later patch, which looks at properties tied to the connector to determine whether dithering should be enabled or not. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180907041948.19913-2-wens@csie.org
2018-09-07Merge tag 'omapdrm-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux into drm-nextDave Airlie42-3866/+2288
omapdrm changes for v4.20 Big amount of changes from Laurent, reworking the driver towards the model used by the other DRM drivers by reverting the direction of many of the operations on the display pipeline. The aim of this work is to allow omapdrm to use the common DRM panels and bridges. Not all of the operations are dealt in these patches, so more work needs to be done. The only change visible to the user should be the change in module dependencies: e.g. earlier a panel module depended on an encoder module, but now the encoder module depends on the panel module, which affects the order in which to unload the modules. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/9bb1a01b-a632-ce0c-f249-7b5470967e3a@ti.com
2018-09-07Merge tag 'drm-misc-next-2018-09-05' of git://anongit.freedesktop.org/drm/drm-misc into drm-nextDave Airlie99-660/+3587
drm-misc-next for 4.20: UAPI Changes: - Add userspace dma-buf device to turn memfd regions into dma-bufs (Gerd) - Add per-plane blend mode property (Lowry) - Change in drm_fourcc.h is documentation only (Brian) Cross-subsystem Changes: - None Core Changes: - Remove user logspam and useless lock in vma_offset_mgr destroy (Chris) - Add get/verify_crc_source for improved crc source selection (Mahesh) - Add __drm_atomic_helper_plane_reset to reduce copypasta (Alexandru) Driver Changes: - various: Replance ref/unref calls with drm_dev_get/put (Thomas) - bridge: Add driver for TI SN65DSI86 chip (Sandeep) - rockchip: Add PX30 support (Sandy) - sun4i: Add support for R40 TCON (Jernej) - vkms: Continued building out vkms, added gem support (Haneen)Driver Changes: - various: fbdev: Wrap remove_conflicting_framebuffers with resource_len accessors to remove a bunch of cargo-cult (Michał) - rockchip: Add rgb output iface support + fixes (Sandy/Heiko) - nouveau/amdgpu: Add cec-over-aux support (Hans) - sun4i: Add support for Allwinner A64 (Jagan) Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michał Mirosław <mirq-linux@rere.qmqm.pl> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Sandy Huang <hjc@rock-chips.com> Cc: Hans Verkuil <hans.verkuil@cisco.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Dave Airlie <airlied@redhat.com> From: Sean Paul <sean@poorly.run> Link: https://patchwork.freedesktop.org/patch/msgid/20180905202210.GA95199@art_vandelay
2018-09-07drm/nouveau/disp/gm200-: enforce identity-mapped SOR assignment for LVDS/eDP panelsBen Skeggs4-3/+28
Fixes eDP backlight issues on more recent laptops. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2018-09-07drm/nouveau/disp: fix DP disable raceBen Skeggs4-9/+19
If a HPD pulse signalling the need to retrain the link occurs between the KMS driver releasing the output and the supervisor interrupt that finishes the teardown, it was possible get a NULL-ptr deref. Avoid this by marking the link as inactive earlier. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2018-09-07drm/nouveau/disp: move eDP panel power handlingBen Skeggs2-25/+35
We need to do this earlier to prevent aux channel timeouts in resume paths on certain systems. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2018-09-07drm/nouveau/disp: remove unused struct memberBen Skeggs2-2/+0
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2018-09-07drm/nouveau/TBDdevinit: don't fail when PMU/PRE_OS is missing from VBIOSBen Skeggs1-1/+2
This Falcon application doesn't appear to be present on some newer systems, so let's not fail init if we can't find it. TBD: is there a way to determine whether it *should* be there? Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2018-09-07drm/nouveau/mmu: don't attempt to dereference vmm without valid instance pointerBen Skeggs1-1/+1
Fixes oopses in certain failure paths. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2018-09-07drm/nouveau: fix oops in client init failure pathBen Skeggs1-7/+7
The NV_ERROR macro requires drm->client to be initialised, which it may not be at this stage of the init process. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2018-09-07drm/nouveau: Fix nouveau_connector_ddc_detect()Lyude Paul1-21/+28
It looks like that when we moved over to using drm_connector_for_each_possible_encoder() in nouveau, that one rather important part of this function got dropped by accident: /* Right v here */ for (i = 0; nv_encoder = NULL, i < DRM_CONNECTOR_MAX_ENCODER; i++) { int id = connector->encoder_ids[i]; if (id == 0) break; Since it's rather difficult to notice: the conditional in this loop is actually: nv_encoder = NULL, i < DRM_CONNECTOR_MAX_ENCODER Meaning that all early breaks result in nv_encoder keeping it's value, otherwise nv_encoder = NULL. Ugh. Since this got dropped, nouveau_connector_ddc_detect() now returns an encoder for every single connector, regardless of whether or not it's detected: [ 1780.056185] nouveau 0000:01:00.0: DRM: DDC responded, but no EDID for DP-2 So: fix this to ensure we only return an encoder if we actually found one, and clean up the rest of the function while we're at it since it's nearly impossible to read properly. Changes since v1: - Don't skip ddc probing for LVDS if we can't switch DDC through vga-switcheroo, just do the DDC probing without calling vga_switcheroo_lock_ddc() - skeggsb Signed-off-by: Lyude Paul <lyude@redhat.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Fixes: ddba766dd07e ("drm/nouveau: Use drm_connector_for_each_possible_encoder()") Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2018-09-07drm/nouveau/drm/nouveau: Don't forget to cancel hpd_work on suspend/unloadLyude Paul3-5/+8
Currently, there's nothing in nouveau that actually cancels this work struct. So, cancel it on suspend/unload. Otherwise, if we're unlucky enough hpd_work might try to keep running up until the system is suspended. Signed-off-by: Lyude Paul <lyude@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2018-09-07drm/nouveau/drm/nouveau: Prevent handling ACPI HPD events too earlyLyude Paul1-6/+20
On most systems with ACPI hotplugging support, it seems that we always receive a hotplug event once we re-enable EC interrupts even if the GPU hasn't even been resumed yet. This can cause problems since even though we schedule hpd_work to handle connector reprobing for us, hpd_work synchronizes on pm_runtime_get_sync() to wait until the device is ready to perform reprobing. Since runtime suspend/resume callbacks are disabled before the PM core calls ->suspend(), any calls to pm_runtime_get_sync() during this period will grab a runtime PM ref and return immediately with -EACCES. Because we schedule hpd_work from our ACPI HPD handler, and hpd_work synchronizes on pm_runtime_get_sync(), this causes us to launch a connector reprobe immediately even if the GPU isn't actually resumed just yet. This causes various warnings in dmesg and occasionally, also prevents some displays connected to the dedicated GPU from coming back up after suspend. Example: usb 1-4: USB disconnect, device number 14 usb 1-4.1: USB disconnect, device number 15 WARNING: CPU: 0 PID: 838 at drivers/gpu/drm/nouveau/include/nvkm/subdev/i2c.h:170 nouveau_dp_detect+0x17e/0x370 [nouveau] CPU: 0 PID: 838 Comm: kworker/0:6 Not tainted 4.17.14-201.Lyude.bz1477182.V3.fc28.x86_64 #1 Hardware name: LENOVO 20EQS64N00/20EQS64N00, BIOS N1EET77W (1.50 ) 03/28/2018 Workqueue: events nouveau_display_hpd_work [nouveau] RIP: 0010:nouveau_dp_detect+0x17e/0x370 [nouveau] RSP: 0018:ffffa15143933cf0 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffff8cb4f656c400 RCX: 0000000000000000 RDX: ffffa1514500e4e4 RSI: ffffa1514500e4e4 RDI: 0000000001009002 RBP: ffff8cb4f4a8a800 R08: ffffa15143933cfd R09: ffffa15143933cfc R10: 0000000000000000 R11: 0000000000000000 R12: ffff8cb4fb57a000 R13: ffff8cb4fb57a000 R14: ffff8cb4f4a8f800 R15: ffff8cb4f656c418 FS: 0000000000000000(0000) GS:ffff8cb51f400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f78ec938000 CR3: 000000073720a003 CR4: 00000000003606f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ? _cond_resched+0x15/0x30 nouveau_connector_detect+0x2ce/0x520 [nouveau] ? _cond_resched+0x15/0x30 ? ww_mutex_lock+0x12/0x40 drm_helper_probe_detect_ctx+0x8b/0xe0 [drm_kms_helper] drm_helper_hpd_irq_event+0xa8/0x120 [drm_kms_helper] nouveau_display_hpd_work+0x2a/0x60 [nouveau] process_one_work+0x187/0x340 worker_thread+0x2e/0x380 ? pwq_unbound_release_workfn+0xd0/0xd0 kthread+0x112/0x130 ? kthread_create_worker_on_cpu+0x70/0x70 ret_from_fork+0x35/0x40 Code: 4c 8d 44 24 0d b9 00 05 00 00 48 89 ef ba 09 00 00 00 be 01 00 00 00 e8 e1 09 f8 ff 85 c0 0f 85 b2 01 00 00 80 7c 24 0c 03 74 02 <0f> 0b 48 89 ef e8 b8 07 f8 ff f6 05 51 1b c8 ff 02 0f 84 72 ff ---[ end trace 55d811b38fc8e71a ]--- So, to fix this we attempt to grab a runtime PM reference in the ACPI handler itself asynchronously. If the GPU is already awake (it will have normal hotplugging at this point) or runtime PM callbacks are currently disabled on the device, we drop our reference without updating the autosuspend delay. We only schedule connector reprobes when we successfully managed to queue up a resume request with our asynchronous PM ref. This also has the added benefit of preventing redundant connector reprobes from ACPI while the GPU is runtime resumed! Signed-off-by: Lyude Paul <lyude@redhat.com> Cc: stable@vger.kernel.org Cc: Karol Herbst <kherbst@redhat.com> Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1477182#c41 Signed-off-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2018-09-07drm/nouveau: Reset MST branching unit before enablingLyude Paul1-8/+12
When probing a new MST device, it's not safe to make any assumptions about it's current state. While most well mannered MST hubs will just disable the branching unit on hotplug disconnects, this isn't enough to save us from various other scenarios that might have resulted in something writing to the MST branching unit before we got control of it. This could happen if a previous probe we tried failed, if we're booting in kexec context and the hub is still in the state the last kernel put it in, etc. Luckily; there is no reason we can't just reset the branching unit every time we enable a new topology. So, fix this by resetting it on enabling new topologies to ensure that we always start off with a clean, unmodified topology state on MST sinks. This fixes occasional hard-lockups on my P50's laptop dock (e.g. AUX times out all DPCD trasactions) observed after multiple docks, undocks, and module reloads. Signed-off-by: Lyude Paul <lyude@redhat.com> Cc: stable@vger.kernel.org Cc: Karol Herbst <karolherbst@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2018-09-07drm/nouveau: Only write DP_MSTM_CTRL when neededLyude Paul1-9/+36
Currently, nouveau will re-write the DP_MSTM_CTRL register for an MST hub every time it receives a long HPD pulse on DP. This isn't actually necessary and additionally, has some unintended side effects. With the P50 I've got here, rewriting DP_MSTM_CTRL constantly seems to make it rather likely (1 out of 5 times usually) that bringing up MST with it's ThinkPad dock will fail and result in sideband messages timing out in the middle. Afterwards, successive probes don't manage to get the dock to communicate properly over MST sideband properly. Many times sideband message timeouts from MST hubs are indicative of either the source or the sink dropping an ESI event, which can cause DRM's perspective of the topology's current state to go out of sync with reality. While it's tough to really know for sure what's happening to the dock, using userspace tools to write to DP_MSTM_CTRL in the middle of the MST link probing process does appear to make things flaky. It's possible that when we write to DP_MSTM_CTRL, the function that gets triggered to respond in the dock's firmware temporarily puts it in a state where it might end up not reporting an ESI to the source, or ends up dropping a sideband message we sent it. So, to fix this we make it so that when probing an MST topology, we respect it's current state. If the dock's already enabled, we simply read DP_MSTM_CTRL and disable the topology if it's value is not what we expected. Otherwise, we perform the normal MST probing dance. We avoid taking any action except if the state of the MST topology actually changes. This fixes MST sideband message timeouts and detection failures on my P50 with its ThinkPad dock. Signed-off-by: Lyude Paul <lyude@redhat.com> Cc: stable@vger.kernel.org Cc: Karol Herbst <karolherbst@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2018-09-07drm/nouveau: Remove useless poll_enable() call in drm_load()Lyude Paul1-3/+1
Again, this doesn't do anything. drm_kms_helper_poll_enable() will have already been called in nouveau_display_init() Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Karol Herbst <kherbst@redhat.com> Acked-by: Daniel Vetter <daniel@ffwll.ch> Cc: Lukas Wunner <lukas@wunner.de> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2018-09-07drm/nouveau: Remove useless poll_disable() call in switcheroo_set_state()Lyude Paul1-1/+0
This won't do anything but potentially make us miss hotplugs. We already call drm_kms_helper_poll_disable() in nouveau_pmops_suspend()->nouveau_display_suspend()->nouveau_display_fini() Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Karol Herbst <kherbst@redhat.com> Acked-by: Daniel Vetter <daniel@ffwll.ch> Cc: Lukas Wunner <lukas@wunner.de> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2018-09-07drm/nouveau: Remove useless poll_enable() call in switcheroo_set_state()Lyude Paul1-1/+0
This doesn't do anything, drm_kms_helper_poll_enable() gets called in nouveau_pmops_resume()->nouveau_display_resume()->nouveau_display_init() already. Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Karol Herbst <kherbst@redhat.com> Acked-by: Daniel Vetter <daniel@ffwll.ch> Cc: Lukas Wunner <lukas@wunner.de> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2018-09-07drm/nouveau: Fix deadlocks in nouveau_connector_detect()Lyude Paul1-0/+22
When we disable hotplugging on the GPU, we need to be able to synchronize with each connector's hotplug interrupt handler before the interrupt is finally disabled. This can be a problem however, since nouveau_connector_detect() currently grabs a runtime power reference when handling connector probing. This will deadlock the runtime suspend handler like so: [ 861.480896] INFO: task kworker/0:2:61 blocked for more than 120 seconds. [ 861.483290] Tainted: G O 4.18.0-rc6Lyude-Test+ #1 [ 861.485158] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 861.486332] kworker/0:2 D 0 61 2 0x80000000 [ 861.487044] Workqueue: events nouveau_display_hpd_work [nouveau] [ 861.487737] Call Trace: [ 861.488394] __schedule+0x322/0xaf0 [ 861.489070] schedule+0x33/0x90 [ 861.489744] rpm_resume+0x19c/0x850 [ 861.490392] ? finish_wait+0x90/0x90 [ 861.491068] __pm_runtime_resume+0x4e/0x90 [ 861.491753] nouveau_display_hpd_work+0x22/0x60 [nouveau] [ 861.492416] process_one_work+0x231/0x620 [ 861.493068] worker_thread+0x44/0x3a0 [ 861.493722] kthread+0x12b/0x150 [ 861.494342] ? wq_pool_ids_show+0x140/0x140 [ 861.494991] ? kthread_create_worker_on_cpu+0x70/0x70 [ 861.495648] ret_from_fork+0x3a/0x50 [ 861.496304] INFO: task kworker/6:2:320 blocked for more than 120 seconds. [ 861.496968] Tainted: G O 4.18.0-rc6Lyude-Test+ #1 [ 861.497654] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 861.498341] kworker/6:2 D 0 320 2 0x80000080 [ 861.499045] Workqueue: pm pm_runtime_work [ 861.499739] Call Trace: [ 861.500428] __schedule+0x322/0xaf0 [ 861.501134] ? wait_for_completion+0x104/0x190 [ 861.501851] schedule+0x33/0x90 [ 861.502564] schedule_timeout+0x3a5/0x590 [ 861.503284] ? mark_held_locks+0x58/0x80 [ 861.503988] ? _raw_spin_unlock_irq+0x2c/0x40 [ 861.504710] ? wait_for_completion+0x104/0x190 [ 861.505417] ? trace_hardirqs_on_caller+0xf4/0x190 [ 861.506136] ? wait_for_completion+0x104/0x190 [ 861.506845] wait_for_completion+0x12c/0x190 [ 861.507555] ? wake_up_q+0x80/0x80 [ 861.508268] flush_work+0x1c9/0x280 [ 861.508990] ? flush_workqueue_prep_pwqs+0x1b0/0x1b0 [ 861.509735] nvif_notify_put+0xb1/0xc0 [nouveau] [ 861.510482] nouveau_display_fini+0xbd/0x170 [nouveau] [ 861.511241] nouveau_display_suspend+0x67/0x120 [nouveau] [ 861.511969] nouveau_do_suspend+0x5e/0x2d0 [nouveau] [ 861.512715] nouveau_pmops_runtime_suspend+0x47/0xb0 [nouveau] [ 861.513435] pci_pm_runtime_suspend+0x6b/0x180 [ 861.514165] ? pci_has_legacy_pm_support+0x70/0x70 [ 861.514897] __rpm_callback+0x7a/0x1d0 [ 861.515618] ? pci_has_legacy_pm_support+0x70/0x70 [ 861.516313] rpm_callback+0x24/0x80 [ 861.517027] ? pci_has_legacy_pm_support+0x70/0x70 [ 861.517741] rpm_suspend+0x142/0x6b0 [ 861.518449] pm_runtime_work+0x97/0xc0 [ 861.519144] process_one_work+0x231/0x620 [ 861.519831] worker_thread+0x44/0x3a0 [ 861.520522] kthread+0x12b/0x150 [ 861.521220] ? wq_pool_ids_show+0x140/0x140 [ 861.521925] ? kthread_create_worker_on_cpu+0x70/0x70 [ 861.522622] ret_from_fork+0x3a/0x50 [ 861.523299] INFO: task kworker/6:0:1329 blocked for more than 120 seconds. [ 861.523977] Tainted: G O 4.18.0-rc6Lyude-Test+ #1 [ 861.524644] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 861.525349] kworker/6:0 D 0 1329 2 0x80000000 [ 861.526073] Workqueue: events nvif_notify_work [nouveau] [ 861.526751] Call Trace: [ 861.527411] __schedule+0x322/0xaf0 [ 861.528089] schedule+0x33/0x90 [ 861.528758] rpm_resume+0x19c/0x850 [ 861.529399] ? finish_wait+0x90/0x90 [ 861.530073] __pm_runtime_resume+0x4e/0x90 [ 861.530798] nouveau_connector_detect+0x7e/0x510 [nouveau] [ 861.531459] ? ww_mutex_lock+0x47/0x80 [ 861.532097] ? ww_mutex_lock+0x47/0x80 [ 861.532819] ? drm_modeset_lock+0x88/0x130 [drm] [ 861.533481] drm_helper_probe_detect_ctx+0xa0/0x100 [drm_kms_helper] [ 861.534127] drm_helper_hpd_irq_event+0xa4/0x120 [drm_kms_helper] [ 861.534940] nouveau_connector_hotplug+0x98/0x120 [nouveau] [ 861.535556] nvif_notify_work+0x2d/0xb0 [nouveau] [ 861.536221] process_one_work+0x231/0x620 [ 861.536994] worker_thread+0x44/0x3a0 [ 861.537757] kthread+0x12b/0x150 [ 861.538463] ? wq_pool_ids_show+0x140/0x140 [ 861.539102] ? kthread_create_worker_on_cpu+0x70/0x70 [ 861.539815] ret_from_fork+0x3a/0x50 [ 861.540521] Showing all locks held in the system: [ 861.541696] 2 locks held by kworker/0:2/61: [ 861.542406] #0: 000000002dbf8af5 ((wq_completion)"events"){+.+.}, at: process_one_work+0x1b3/0x620 [ 861.543071] #1: 0000000076868126 ((work_completion)(&drm->hpd_work)){+.+.}, at: process_one_work+0x1b3/0x620 [ 861.543814] 1 lock held by khungtaskd/64: [ 861.544535] #0: 0000000059db4b53 (rcu_read_lock){....}, at: debug_show_all_locks+0x23/0x185 [ 861.545160] 3 locks held by kworker/6:2/320: [ 861.545896] #0: 00000000d9e1bc59 ((wq_completion)"pm"){+.+.}, at: process_one_work+0x1b3/0x620 [ 861.546702] #1: 00000000c9f92d84 ((work_completion)(&dev->power.work)){+.+.}, at: process_one_work+0x1b3/0x620 [ 861.547443] #2: 000000004afc5de1 (drm_connector_list_iter){.+.+}, at: nouveau_display_fini+0x96/0x170 [nouveau] [ 861.548146] 1 lock held by dmesg/983: [ 861.548889] 2 locks held by zsh/1250: [ 861.549605] #0: 00000000348e3cf6 (&tty->ldisc_sem){++++}, at: ldsem_down_read+0x37/0x40 [ 861.550393] #1: 000000007009a7a8 (&ldata->atomic_read_lock){+.+.}, at: n_tty_read+0xc1/0x870 [ 861.551122] 6 locks held by kworker/6:0/1329: [ 861.551957] #0: 000000002dbf8af5 ((wq_completion)"events"){+.+.}, at: process_one_work+0x1b3/0x620 [ 861.552765] #1: 00000000ddb499ad ((work_completion)(&notify->work)#2){+.+.}, at: process_one_work+0x1b3/0x620 [ 861.553582] #2: 000000006e013cbe (&dev->mode_config.mutex){+.+.}, at: drm_helper_hpd_irq_event+0x6c/0x120 [drm_kms_helper] [ 861.554357] #3: 000000004afc5de1 (drm_connector_list_iter){.+.+}, at: drm_helper_hpd_irq_event+0x78/0x120 [drm_kms_helper] [ 861.555227] #4: 0000000044f294d9 (crtc_ww_class_acquire){+.+.}, at: drm_helper_probe_detect_ctx+0x3d/0x100 [drm_kms_helper] [ 861.556133] #5: 00000000db193642 (crtc_ww_class_mutex){+.+.}, at: drm_modeset_lock+0x4b/0x130 [drm] [ 861.557864] ============================================= [ 861.559507] NMI backtrace for cpu 2 [ 861.560363] CPU: 2 PID: 64 Comm: khungtaskd Tainted: G O 4.18.0-rc6Lyude-Test+ #1 [ 861.561197] Hardware name: LENOVO 20EQS64N0B/20EQS64N0B, BIOS N1EET78W (1.51 ) 05/18/2018 [ 861.561948] Call Trace: [ 861.562757] dump_stack+0x8e/0xd3 [ 861.563516] nmi_cpu_backtrace.cold.3+0x14/0x5a [ 861.564269] ? lapic_can_unplug_cpu.cold.27+0x42/0x42 [ 861.565029] nmi_trigger_cpumask_backtrace+0xa1/0xae [ 861.565789] arch_trigger_cpumask_backtrace+0x19/0x20 [ 861.566558] watchdog+0x316/0x580 [ 861.567355] kthread+0x12b/0x150 [ 861.568114] ? reset_hung_task_detector+0x20/0x20 [ 861.568863] ? kthread_create_worker_on_cpu+0x70/0x70 [ 861.569598] ret_from_fork+0x3a/0x50 [ 861.570370] Sending NMI from CPU 2 to CPUs 0-1,3-7: [ 861.571426] NMI backtrace for cpu 6 skipped: idling at intel_idle+0x7f/0x120 [ 861.571429] NMI backtrace for cpu 7 skipped: idling at intel_idle+0x7f/0x120 [ 861.571432] NMI backtrace for cpu 3 skipped: idling at intel_idle+0x7f/0x120 [ 861.571464] NMI backtrace for cpu 5 skipped: idling at intel_idle+0x7f/0x120 [ 861.571467] NMI backtrace for cpu 0 skipped: idling at intel_idle+0x7f/0x120 [ 861.571469] NMI backtrace for cpu 4 skipped: idling at intel_idle+0x7f/0x120 [ 861.571472] NMI backtrace for cpu 1 skipped: idling at intel_idle+0x7f/0x120 [ 861.572428] Kernel panic - not syncing: hung_task: blocked tasks So: fix this by making it so that normal hotplug handling /only/ happens so long as the GPU is currently awake without any pending runtime PM requests. In the event that a hotplug occurs while the device is suspending or resuming, we can simply defer our response until the GPU is fully runtime resumed again. Changes since v4: - Use a new trick I came up with using pm_runtime_get() instead of the hackish junk we had before Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Karol Herbst <kherbst@redhat.com> Acked-by: Daniel Vetter <daniel@ffwll.ch> Cc: stable@vger.kernel.org Cc: Lukas Wunner <lukas@wunner.de> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.