aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/gpu
AgeCommit message (Collapse)AuthorFilesLines
2018-05-14drm/i915/gvt: let force_to_nonpriv cmd handler only valid for LRI cmdZhao Yan1-3/+11
the cmd_reg_handler() is called by cmds LRM, PIPE_CTRL, SRM... for LRM, SRM, we cannot get write data in a simple way. On other side, the force_to_nonpriv reigsters will only be written in LRI in current drivers. so we don't want to bother the handler to handle those memory access cmds, just leave a print message here. Signed-off-by: Zhao Yan <yan.y.zhao@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2018-05-14drm/i915/gvt: do not return error on handling force_to_nonpriv registersZhao Yan2-2/+3
Return error will cause vm hang and enter failsafe mode. However, we don't want that happen on detecting an wrong force_to_nonpriv register write. Therefore, we just omit the wrong write or patch it to default value. v2: only return 0 on detecting lri write of registers outside whitelist, but still return error on other error conditions. (zhenyu wang) Signed-off-by: Zhao Yan <yan.y.zhao@intel.com> Reviewed-by: Zhang Yulei <yulei.zhang@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2018-05-14drm/i915/gvt: let NOPID be the default value of force_to_nonpriv registersZhao Yan2-9/+22
Each ring has a NOPID register and currently they are regarded as default value of force_to_nonpriv registers in guest drivers Signed-off-by: Zhao Yan <yan.y.zhao@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2018-05-14drm/i915/gvt: Remove disable_warn_untrack and print untracked mmio with debug levelChangbin Du3-11/+3
The disable_warn_untrack never prevent gvt from printing untracked mmio errors. We were disturbed by this error storm and the fix is just adding them to the list with no essential new change. This message is only useful for enabling new platform during developing process. So lower the message level to debug and then remove disable_warn_untrack. Signed-off-by: Changbin Du <changbin.du@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2018-05-13drm/i915/gen9: Add WaClearHIZ_WM_CHICKEN3 for bxt and glkMichel Thierry2-0/+7
Factor in clear values wherever required while updating destination min/max. References: HSDES#1604444184 Signed-off-by: Michel Thierry <michel.thierry@intel.com> Cc: mesa-dev@lists.freedesktop.org Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Oscar Mateo <oscar.mateo@intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20180510200708.18097-1-michel.thierry@intel.com Cc: stable@vger.kernel.org
2018-05-13drm/i915/selftests: scrub 64KMatthew Auld3-0/+25
We write all 4K page entries, even when using 64K pages. In order to verify that the HW isn't cheating by using the 4K PTE instead of the 64K PTE, we want to remove all the surplus entries. If the HW skipped the 64K PTE, it will read/write into the scratch page instead - which we detect as missing results during selftests. v2: much improved commentary (Chris) Signed-off-by: Matthew Auld <matthew.auld@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Changbin Du <changbin.du@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20180511095140.25590-1-matthew.auld@intel.com
2018-05-11drm/i915/oa: Check that OA is disabled before unpinningChris Wilson1-0/+8
Before we unpin the buffer used for OA reports and return it to the system, we need to be sure that the HW has finished writing into it. For lack of a better idea, poll OACONTROL to check it is switched off. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106379 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Tested-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180511135207.12880-1-chris@chris-wilson.co.uk
2018-05-11Merge remote-tracking branch 'drm/drm-next' into drm-misc-nextMaarten Lankhorst175-5715/+8117
drm-misc-next is still based on v4.16-rc7, and was getting a bit stale. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2018-05-11Revert "drm/i915/cnl: Use mmio access to context status buffer"Chris Wilson1-3/+0
In the previous patch (to include a rmb() after readig the CSB WRITE pointer from the HWSP) we believe we have fixed the underlying bug, and so can re-enable using the HWSP on Cannolake. This reverts commit 61bf9719fa17 ("drm/i915/cnl: Use mmio access to context status buffer"). References: https://bugs.freedesktop.org/show_bug.cgi?id=105888 References: https://bugs.freedesktop.org/show_bug.cgi?id=106185 References: 61bf9719fa17 ("drm/i915/cnl: Use mmio access to context status buffer") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Michał Winiarski <michal.winiarski@intel.com> Cc: Rafael Antognolli <rafael.antognolli@intel.com> Cc: Michel Thierry <michel.thierry@intel.com> Cc: Timo Aaltonen <tjaalton@ubuntu.com> Tested-by: Timo Aaltonen <tjaalton@ubuntu.com> Acked-by: Michel Thierry <michel.thierry@intel.com> Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180511121147.31915-2-chris@chris-wilson.co.uk
2018-05-11drm/i915/execlists: Use rmb() to order CSB readsChris Wilson1-0/+1
We assume that the CSB is written using the normal ringbuffer coherency protocols, as outlined in kernel/events/ring_buffer.c: * (HW) (DRIVER) * * if (LOAD ->data_tail) { LOAD ->data_head * (A) smp_rmb() (C) * STORE $data LOAD $data * smp_wmb() (B) smp_mb() (D) * STORE ->data_head STORE ->data_tail * } So we assume that the HW fulfils its ordering requirements (B), and so we should use a complimentary rmb (C) to ensure that our read of its WRITE pointer is completed before we start accessing the data. The final mb (D) is implied by the uncached mmio we perform to inform the HW of our READ pointer. References: https://bugs.freedesktop.org/show_bug.cgi?id=105064 References: https://bugs.freedesktop.org/show_bug.cgi?id=105888 References: https://bugs.freedesktop.org/show_bug.cgi?id=106185 Fixes: 767a983ab255 ("drm/i915/execlists: Read the context-status HEAD from the HWSP") References: 61bf9719fa17 ("drm/i915/cnl: Use mmio access to context status buffer") Suggested-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Michał Winiarski <michal.winiarski@intel.com> Cc: Rafael Antognolli <rafael.antognolli@intel.com> Cc: Michel Thierry <michel.thierry@intel.com> Cc: Timo Aaltonen <tjaalton@ubuntu.com> Tested-by: Timo Aaltonen <tjaalton@ubuntu.com> Acked-by: Michel Thierry <michel.thierry@intel.com> Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180511121147.31915-1-chris@chris-wilson.co.uk
2018-05-11drm: Match sysfs name in link removal to link creationHaneen Mohammed1-1/+1
This patch matches the sysfs name used in the unlinking with the linking function. Otherwise, remove_compat_control_link() fails to remove sysfs created by create_compat_control_link() in drm_dev_register(). Fixes: 6449b088dd51 ("drm: Add fake controlD* symlinks for backwards compat") Cc: Dave Airlie <airlied@gmail.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Emil Velikov <emil.l.velikov@gmail.com> Cc: David Herrmann <dh.herrmann@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: David Airlie <airlied@linux.ie> Cc: dri-devel@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v4.10+ Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com> [seanpaul added Fixes and Cc tags] Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180511041542.GA4253@haneen-vb
2018-05-11drm/i915/icl: WaForwardProgressSoftResetOscar Mateo2-0/+12
Avoids a hang during soft reset. v2: Rebased on top of the WA refactoring v3: Added References (Mika) v4: - Rebased - C, not lisp (Chris) - Which steppings affected by this are not clear. For the moment, apply unconditionally as per the BSpec (Mika) - Add reference to another HSD also related References: HSDES#1405476379 References: HSDES#2006612137 Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1525814984-20039-14-git-send-email-oscar.mateo@intel.com
2018-05-11drm/i915/icl: Wa_1406838659Oscar Mateo2-0/+9
Disable CGPSF unit clock gating to prevent an issue. v2: Rebased on top of the WA refactoring v3: Added References (Mika) v4: - Rebased - C, not lisp (Chris) - Remove unintentional whitespaces (Mika) - Fixed in C0 (Mika) References: HSDES#1406838659 Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1525814984-20039-13-git-send-email-oscar.mateo@intel.com
2018-05-11drm/i915/icl: Wa_1604302699Oscar Mateo2-1/+8
Disable I2M Write for performance reasons. v2: Rebased on top of the WA refactoring v3: Added References (Mika) v4: - Rebased - C, not lisp (Chris) - GEN7 chicken bit in the wrong side of the fence (Mika) - Use two spaces to align bit macros References: HSDES#1604302699 Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1525814984-20039-12-git-send-email-oscar.mateo@intel.com
2018-05-11drm/i915/icl: Wa_1406680159Oscar Mateo1-0/+5
Disable GWL clock gating to prevent an issue that might cause hangs. v2: Rebased on top of the WA refactoring v3: Wa_2201832410 officially merged with Wa_1406680159 v4: Added References (Mika) v5: - Rebased - C, not lisp (Chris) - Add reference where WA is better explained (Rodrigo) - Add reference to WA that got merged with this References: HSDES#1406681710 References: HSDES#1406680159 References: HSDES#2201832410 Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1525814984-20039-11-git-send-email-oscar.mateo@intel.com
2018-05-11drm/i915/icl: Wa_1405779004Oscar Mateo2-0/+7
Disable MSC clock gating to prevent data corruption. BSpec: 19257 v2: Rebased on top of the WA refactoring v3: Added References (Mika) v4: - Rebased - C, not lisp (Chris) - A0 only (Mika) References: HSDES#1405779004 Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1525814984-20039-10-git-send-email-oscar.mateo@intel.com
2018-05-11drm/i915/icl: WaDisCtxReloadOscar Mateo2-0/+9
Revert to the legacy implementation to avoid a system hang. v2: Correct the address for GAMW_ECO_DEV_RW_IA_REG v3: Renamed to Wa_220166154 v4: Rebased on top of the WA refactoring v5: Added References (Mika) v6: - Rebased - C, not lisp (Chris) References: HSDES#220166154 Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1525814984-20039-9-git-send-email-oscar.mateo@intel.com
2018-05-11drm/i915/icl: WaCL2SFHalfMaxAllocOscar Mateo2-0/+11
This workarounds an issue with insufficient storage for the CL2 and SF units. v2: Renamed to Wa_1405766107 v3: Wrapped the commit message v4: Rebased on top of the WA refactoring v5: Added References (Mika) v6: - Rebased - s/MACALLOC/MAXALLOC (Mika) - C, not lisp (Chris) References: HSDES#1405766107 Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1525814984-20039-8-git-send-email-oscar.mateo@intel.com
2018-05-11drm/i915/icl: WaDisableCleanEvictsOscar Mateo2-2/+9
Avoids an undefined LLC behavior. BSpec: 9613 v2: Renamed to Wa_1405733216 v3: Spaces around '<<' and fix surrounding code v4: Rebased on top of the WA refactoring v5: Added References (Mika) v6: - Rebased - C, not lisp (Chris) References: HSDES#1405733216 Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1525814984-20039-7-git-send-email-oscar.mateo@intel.com
2018-05-11drm/i915/icl: WaModifyGamTlbPartitioningOscar Mateo2-0/+10
Adjust default GAM TLB partitioning for performance reasons. v2: Only touch the bits that we really need v3: Rebased on top of the WA refactoring v4: - Added References (Mika) - Rebased v5: - Rebased - C, not lisp (Chris) - Correct reference number (Mika) References: HSDES#220160670 Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1525814984-20039-6-git-send-email-oscar.mateo@intel.com
2018-05-11drm/i915/icl: WaL3BankAddressHashingOscar Mateo2-0/+16
Revert to an L3 non-hash model, for performance reasons. v2: - Place the WA name above the actual change - Improve the register naming v3: - Rebased - Renamed to Wa_1604223664 v4: Rebased on top of the WA refactoring v5: - Added References (Mika) - Fixed wrong mask and value (Mika) - Do not apply together with another WA for the same register (not worth the hassle) v6: - Rebased - C, not lisp (Chris) References: HSDES#1604223664 Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1525814984-20039-5-git-send-email-oscar.mateo@intel.com
2018-05-11drm/i915/icl: WaGAPZPrioritySchemeOscar Mateo2-2/+9
The default GAPZ arbitrer priority value at power-on has been found to be incorrect. v2: Now renamed to Wa_1405543622 v3: Rebased on top of the WA refactoring v4: Added HSDES reference number (Mika) v5: - Rebased - C, not lisp (Chris) References: HSDES#1405543622 Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1525814984-20039-4-git-send-email-oscar.mateo@intel.com
2018-05-11drm/i915/icl: Enable Sampler DFROscar Mateo2-1/+11
Sampler Dynamic Frequency Rebalancing (DFR) aims to reduce Sampler power by dynamically changing its clock frequency in low-throughput conditions. This patches enables it by default on Gen11. v2: Wrong operation to clear the bit (Praveen) v3: Rebased on top of the WA refactoring v4: Move to icl_init_clock_gating, since it's not a WA (Rodrigo) v5: C, not lisp (Chris) Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Cc: Praveen Paneri <praveen.paneri@intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1525814984-20039-3-git-send-email-oscar.mateo@intel.com
2018-05-11drm/i915/icl: Introduce initial Icelake WorkaroundsOscar Mateo7-6/+69
Inherit workarounds from previous platforms that are still valid for Icelake. v2: GEN7_ROW_CHICKEN2 is masked v3: - Since it has been fixed already in upstream, removed the TODO comment about WA_SET_BIT for WaInPlaceDecompressionHang. - Squashed with this patch: drm/i915/icl: add icelake_init_clock_gating() from Paulo Zanoni <paulo.r.zanoni@intel.com> - Squashed with this patch: drm/i915/icl: WaForceEnableNonCoherent from Oscar Mateo <oscar.mateo@intel.com> - WaPushConstantDereferenceHoldDisable is now Wa_1604370585 and applies to B0 as well. - WaPipeControlBefore3DStateSamplePattern WABB was being applied to ICL incorrectly. v4: - Wrap the commit message - s/dev_priv/p to please checkpatch v5: Rebased on top of the WA refactoring v6: Rebased on top of further whitelist registers refactoring (Michel) v7: Added WaRsForcewakeAddDelayForAck v8: s/ICL_HDC_CHICKEN0/ICL_HDC_MODE (Mika) v9: - C, not lisp (Chris) - WaIncreaseDefaultTLBEntries is the same for GEN > 9_LP (Tvrtko) Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tomasz Lis <tomasz.lis@intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1525814984-20039-2-git-send-email-oscar.mateo@intel.com
2018-05-11drm/i915/gtt: Trust the uncached store to flush wcbMika Kuoppala1-10/+8
Not all architectures guarantee that uncached read will flush the write combining buffer. So marking it explicitly is recommended [1]. However we know the architecture we are operating on and can avoid wmb as the UC store will flush the wcb [2]. Omit the wmb() before invalidate as redudant. v2: squash combining and removal (Chris) v3: remove obsolete comments about posting reads (Chris) References: http://yarchive.net/comp/linux/write_combining.html [1] References: http://download.intel.com/design/PentiumII/applnots/24442201.pdf [2] Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Matthew Auld <matthew.auld@intel.com> Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20180508124154.14586-1-mika.kuoppala@linux.intel.com
2018-05-11drm/i915: Add NV12 as supported format for sprite planeChandra Konduru1-2/+22
This patch adds NV12 to list of supported formats for sprite plane. v2: Rebased (me) v3: Review comments by Ville addressed - Removed skl_plane_formats_with_nv12 and added NV12 case in existing skl_plane_formats - Added the 10bpc RGB formats v4: Addressed review comments from Clinton A Taylor "Why are we adding 10 bit RGB formats with the NV12 series patches? Trying to set XR30 or AB30 results in error returned even though the modes are advertised for the planes" - Removed 10bit RGB formats added previously with NV12 series v5: Missed the Tested-by/Reviewed-by in the previous series Adding the same to commit message in this version. Addressed review comments from Clinton A Taylor "Why are we adding 10 bit RGB formats with the NV12 series patches? Trying to set XR30 or AB30 results in error returned even though the modes are advertised for the planes" - Previous version has 10bit RGB format removed from VLV formats by mistake. Fixing that in this version. Removed 10bit RGB formats added previously with NV12 series for SKL. v6: Addressed review comments by Ville Restricting the NV12 to BXT and PIPE A and B v7: Rebased (me) v8: Rebased (me) Restricting NV12 changes to BXT and KBL Restricting NV12 changes for plane 0 (overlay) v9: Rebased (me) v10: Addressed review comments from Maarten. Adding NV12 to skl_plane_formats itself. v11: Addressed review comments from Shashank Sharma v12: Addressed review comments from Shashank Sharma Made the condition in intel_sprite_plane_create simple and easy to read as suggested. v13: Adding reviewed by tag from Shashank Sharma Addressed review comments from Juha-Pekka Heikkila "NV12 not to be supported by SKL" v14: Addressed review comments from Ville Added skl_planar_formats to include NV12 and a check skl_plane_has_planar in sprite create Added NV12 format to skl_mod_supported. These were review comments from Kristian Høgsberg <hoegsberg@gmail.com> v15: Added reviewed by from Juha-Pekka Heikkila v16: Rebased the series v17: Added all tiling under mod supported for NV12 Credits to Megha Aggarwal v18: Added RB by Maarten and Kristian v19: Addressed review comments from Maarten Made modification to skl_mod_supported Credits-to: Megha Aggarwal <megha.aggarwal@intel.com> Credits-to: Kristian Høgsberg <hoegsberg@gmail.com> Reviewed-by: Kristian Høgsberg <hoegsberg@gmail.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Tested-by: Clinton Taylor <clinton.a.taylor@intel.com> Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com> Reviewed-by: Shashank Sharma <shashank.sharma@intel.com> Reviewed-by: Clinton Taylor <clinton.a.taylor@intel.com> Signed-off-by: Chandra Konduru <chandra.konduru@intel.com> Signed-off-by: Nabendu Maiti <nabendu.bikash.maiti@intel.com> Signed-off-by: Vidya Srinivas <vidya.srinivas@intel.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1526074397-10457-7-git-send-email-vidya.srinivas@intel.com
2018-05-11drm/i915: Add NV12 as supported format for primary planeChandra Konduru2-2/+50
This patch adds NV12 to list of supported formats for primary plane v2: Rebased (Chandra Konduru) v3: Rebased (me) v4: Review comments by Ville addressed Removed the skl_primary_formats_with_nv12 and added NV12 case in existing skl_primary_formats v5: Rebased (me) v6: Missed the Tested-by/Reviewed-by in the previous series Adding the same to commit message in this version. v7: Review comments by Ville addressed Restricting the NV12 for BXT and on PIPE A and B Rebased (me) v8: Rebased (me) Modified restricting the NV12 support for both BXT and KBL. v9: Rebased (me) v10: Addressed review comments from Maarten. Adding NV12 inside skl_primary_formats itself. v11: Adding Reviewed By tag from Shashank Sharma v12: Addressed review comments from Juha-Pekka Heikkila "NV12 not to be supported by SKL" v13: Addressed review comments from Ville Added skl_pri_planar_formats to include NV12 and skl_plane_has_planar function to check for NV12 support on plane. Added NV12 format to skl_mod_supported. These were review comments from Kristian Høgsberg <hoegsberg@gmail.com> v14: Added reviewed by from Juha-Pekka Heikkila v15: Rebased the series v16: Added all tiling support under mod supported for NV12. Credits to Megha Aggarwal v17: Added RB by Maarten and Kristian v18: Review comments from Maarten addressed - Removing BROXTON support for NV12 due to WA826 v19: Addressed review comments from Maarten Make changes to skl_mod_supported Credits-to: Megha Aggarwal megha.aggarwal@intel.com Credits-to: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Tested-by: Clinton Taylor <clinton.a.taylor@intel.com> Reviewed-by: Kristian Høgsberg <hoegsberg@gmail.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com> Reviewed-by: Clinton Taylor <clinton.a.taylor@intel.com> Reviewed-by: Shashank Sharma <shashank.sharma@intel.com> Signed-off-by: Chandra Konduru <chandra.konduru@intel.com> Signed-off-by: Nabendu Maiti <nabendu.bikash.maiti@intel.com> Signed-off-by: Vidya Srinivas <vidya.srinivas@intel.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1526074397-10457-6-git-send-email-vidya.srinivas@intel.com
2018-05-11drm/i915: Add NV12 support to intel_framebuffer_initChandra Konduru1-0/+22
This patch adds NV12 as supported format to intel_framebuffer_init and performs various checks. v2: -Fix an issue in checks added (Chandra Konduru) v3: rebased (me) v4: Review comments by Ville addressed Added platform check for NV12 in intel_framebuffer_init Removed offset checks for NV12 case v5: Addressed review comments by Clinton A Taylor This NV12 support only correctly works on SKL. Plane color space conversion is different on GLK and later platforms causing the colors to display incorrectly. Ville's plane color space property patch series in review will fix this issue. - Restricted the NV12 case in intel_framebuffer_init to SKL and BXT only. v6: Rebased (me) v7: Addressed review comments by Ville Restricting the NV12 to BXT for now. v8: Rebased (me) Restricting the NV12 changes to BXT and KBL for now. v9: Rebased (me) v10: NV12 supported by all GEN >= 9. Making this change in intel_framebuffer_init. This is part of addressing Maarten's review comments. Comment under v8 no longer applicable v11: Addressed review comments from Shashank Sharma v12: Adding Reviewed By from Shashank Sharma v13: Addressed review comments from Juha-Pekka Heikkila "NV12 not to be supported by SKL" v14: Addressed review comments from Maarten. Add checks for fb width height for NV12 and fail the fb creation if check fails. Added reviewed by from Juha-Pekka Heikkila v15: Rebased the series v16: Setting the minimum value during fb creating to 16 as per Bspec for NV12. Earlier minimum was expected to be > 16. Now changed it to >=16. v17: Adding restriction to framebuffer_init - the fb width and height should be a multiplier of 4 v18: Added RB from Maarten. Included Maarten's review comments Dont allow CCS formats for fb creation of NV12 v19: Review comments from Maarten addressed - Removing BROXTON support for NV12 due to WA826 Credits-to: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Tested-by: Clinton Taylor <clinton.a.taylor@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Shashank Sharma <shashank.sharma@intel.com> Reviewed-by: Clinton Taylor <clinton.a.taylor@intel.com> Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com> Signed-off-by: Chandra Konduru <chandra.konduru@intel.com> Signed-off-by: Nabendu Maiti <nabendu.bikash.maiti@intel.com> Signed-off-by: Vidya Srinivas <vidya.srinivas@intel.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1526074397-10457-5-git-send-email-vidya.srinivas@intel.com
2018-05-11drm/i915: Add skl_check_nv12_surface for NV12Maarten Lankhorst2-3/+29
We skip src trunction/adjustments for NV12 case and handle the sizes directly. Without this, pipe fifo underruns are seen on APL/KBL. v2: For NV12, making the src coordinates multiplier of 4 v3: Moving all the src coords handling code for NV12 to skl_check_nv12_surface v4: Added RB from Mika v5: Rebased the series. Removed checks of mult of 4 in skl_update_scaler, Added NV12 condition in intel_check_sprite_plane where src x/w is being checked for mult of 2 for yuv planes. v6: Made changes to skl_check_nv12_surface as per WA#1106 Reviewed-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Vidya Srinivas <vidya.srinivas@intel.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1526074397-10457-4-git-send-email-vidya.srinivas@intel.com
2018-05-11drm/i915: Enable Display WA 0528Vidya Srinivas1-3/+19
Possible hang with NV12 plane surface formats. WA: When the plane source pixel format is NV12, the CHICKEN_PIPESL_* register bit 22 must be set to 1 and the render decompression must not be enabled on any of the planes in that pipe. v2: removed unnecessary POSTING_READ v3: Added RB from Maarten v4: Removed support for NV12 for BROXTON Credits-to: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Vidya Srinivas <vidya.srinivas@intel.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1526074397-10457-3-git-send-email-vidya.srinivas@intel.com
2018-05-11drm/i915: Enable display workaround 827 for all planes, v2.Maarten Lankhorst3-18/+33
The workaround was applied only to the primary plane, but is required on all planes. Iterate over all planes in the crtc atomic check to see if the workaround is enabled, and only perform the actual toggling in the pre/post plane update functions. Changes since v1: - Track active NV12 planes in a nv12_planes bitmask. (Ville) v2: Removing BROXTON support for NV12 due to WA826 Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1526074397-10457-2-git-send-email-vidya.srinivas@intel.com
2018-05-11drm: Add and handle new aspect ratios in DRM layerShashank Sharma1-0/+12
HDMI 2.0/CEA-861-F introduces two new aspect ratios: - 64:27 - 256:135 This patch: - Adds new DRM flags for to represent these new aspect ratios. - Adds new cases to handle these aspect ratios while converting from user->kernel mode or vise versa. This patch was once reviewed and merged, and later reverted due to lack of DRM client protection, while adding aspect ratio bits in user modes. This is a re-spin of the series, with DRM client cap protection. The previous series can be found here: https://pw-emeril.freedesktop.org/series/10850/ Signed-off-by: Shashank Sharma <shashank.sharma@intel.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> (V2) Reviewed-by: Jose Abreu <Jose.Abreu@synopsys.com> (V2) Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: Jose Abreu <Jose.Abreu@synopsys.com> Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com> V3: rebase V4: rebase V5: corrected the macro name for an aspect ratio, in a switch case. V6: rebase V7: rebase V8: rebase V9: rebase V10: rebase V11: rebase V12: rebase V13: rebase V14: rebase Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1525777785-9740-11-git-send-email-ankit.k.nautiyal@intel.com
2018-05-11drm: Add aspect ratio parsing in DRM layerShashank Sharma2-3/+44
Current DRM layer functions don't parse aspect ratio information while converting a user mode->kernel mode or vice versa. This causes modeset to pick mode with wrong aspect ratio, eventually causing failures in HDMI compliance test cases, due to wrong VIC. This patch adds aspect ratio information in DRM's mode conversion and mode comparision functions, to make sure kernel picks mode with right aspect ratio (as per the VIC). Background: This patch was once reviewed and merged, and later reverted due to lack of DRM cap protection. This is a re-spin of this patch, this time with DRM cap protection, to avoid aspect ratio information, when the client doesn't request for it. Review link: https://pw-emeril.freedesktop.org/patch/104068/ Background discussion: https://patchwork.kernel.org/patch/9379057/ Signed-off-by: Shashank Sharma <shashank.sharma@intel.com> Signed-off-by: Lin, Jia <lin.a.jia@intel.com> Signed-off-by: Akashdeep Sharma <akashdeep.sharma@intel.com> Reviewed-by: Jim Bride <jim.bride@linux.intel.com> (V2) Reviewed-by: Jose Abreu <Jose.Abreu@synopsys.com> (V4) Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Jim Bride <jim.bride@linux.intel.com> Cc: Jose Abreu <Jose.Abreu@synopsys.com> Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com> V3: modified the aspect-ratio check in drm_mode_equal as per new flags provided by Ville. https://patchwork.freedesktop.org/patch/188043/ V4: rebase V5: rebase V6: As recommended by Ville, avoided matching of aspect-ratio in drm_fb_helper, while trying to find a common mode among connectors for the target clone mode. V7: rebase V8: rebase V9: rebase V10: rebase V11: rebase V12: rebase V13: rebase V14: rebase Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1525777785-9740-10-git-send-email-ankit.k.nautiyal@intel.com
2018-05-11drm: Expose modes with aspect ratio, only if requestedAnkit Nautiyal1-7/+37
We parse the EDID and add all the modes in the connector's modelist. This adds CEA modes with aspect ratio information too, regardless of whether user space requested this information or not. This patch: -prunes the modes with aspect-ratio information, from the drm_mode_get_connector modelist supplied to the user, if the user-space has not set the aspect ratio DRM client cap. However if such a mode is unique in the list, it is kept in the list, with aspect-ratio flags reset. -prepares a list of exposed modes, which is used to find unique modes if aspect-ratio is not allowed. -adds a new list_head 'exposed_head' in drm_mode_display, to traverse the list of exposed modes. Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Shashank Sharma <shashank.sharma@intel.com> Cc: Jose Abreu <jose.abreu@synopsys.com> Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> V3: As suggested by Ville, modified the mechanism of pruning of modes with aspect-ratio, if the aspect-ratio is not supported. Instead of straight away pruning such a mode, the mode is retained with aspect ratio bits set to zero, provided it is unique. V4: rebase V5: Addressed review comments from Ville: -used a pointer to store last valid mode. -avoided, modifying of picture_aspect_ratio in kernel mode, instead only flags bits of user mode are reset (if aspect-ratio is not supported). V6: As suggested by Ville, corrected the mode pruning logic and elaborated the mode pruning logic and the assumptions taken. V7: rebase V8: rebase V9: rebase V10: rebase V11: Fixed the issue caused in kms_3d test, and enhanced the pruning logic to correctly identify and prune modes with aspect-ratio, if aspect-ratio cap is not set. V12: As suggested by Ville, added another list_head in drm_mode_display to traverse the list of exposed modes and avoided duplication of modes. V13: Minor modifications, as suggested by Ville. v14: As suggested by Daniel Vetter and Ville Syrjala, corrected the pruning logic to avoid any dependency in the order of mode with aspect-ratio. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1525777785-9740-9-git-send-email-ankit.k.nautiyal@intel.com
2018-05-11drm: Handle aspect ratio info in legacy modeset pathAnkit Nautiyal1-0/+9
If the user-space does not support aspect-ratio, and requests for a modeset with mode having aspect ratio bits set, then the given user-mode must be rejected. Secondly, while preparing a user-mode from kernel mode, the aspect-ratio info must not be given, if aspect-ratio is not supported by the user. This patch: 1. rejects the modes with aspect-ratio info, during modeset, if the user does not support aspect ratio. 2. does not load the aspect-ratio info in user-mode structure, if aspect ratio is not supported. 3. adds helper functions for determining if aspect-ratio is expected in user-mode and for allowing/disallowing the aspect-ratio, if its not expected. Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> V3: Addressed review comments from Ville: Do not corrupt the current crtc state by updating aspect-ratio on the fly. V4: rebase V5: As suggested by Ville, rejected the modeset calls for modes with aspect ratio, if the user does not set aspect-ratio cap. V6: Used the helper functions for determining if aspect-ratio is expected in the user-mode. V7: rebase V8: rebase V9: rebase V10: Modified the commit-message V11: rebase V12: Merged the patch for adding aspect-ratio helper functions with this patch. V13: Minor modifications as suggested by Ville. V14: Removed helper functions, as they were used only once in legacy modeset path, as suggested by Daniel Vetter. Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1525777785-9740-8-git-send-email-ankit.k.nautiyal@intel.com
2018-05-11drm: Add DRM client cap for aspect-ratioAnkit Nautiyal1-0/+9
To enable aspect-ratio support in DRM, blindly exposing the aspect ratio information along with mode, can break things in existing non-atomic user-spaces which have no intention or support to use this aspect ratio information. To avoid this, a new drm client cap is required to enable a non-atomic user-space to advertise if it supports modes with aspect-ratio. Based on this cap value, the kernel will take a call on exposing the aspect ratio info in modes or not. This patch adds the client cap for aspect-ratio. Since no atomic-userspaces blow up on receiving aspect-ratio information, the client cap for aspect-ratio is always enabled for atomic clients. Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Shashank Sharma <shashank.sharma@intel.com> Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> V3: rebase V4: As suggested by Marteen Lankhorst modified the commit message explaining the need to use the DRM cap for aspect-ratio. Also, tweaked the comment lines in the code for better understanding and clarity, as recommended by Shashank Sharma. V5: rebase V6: rebase V7: rebase V8: rebase V9: rebase V10: rebase V11: rebase V12: As suggested by Daniel Vetter and Ville Syrjala, always enable aspect-ratio client cap for atomic userspaces, if no atomic userspace breaks on aspect-ratio bits. V13: rebase V14: rebase Reviewed-by: Shashank Sharma <shashank.sharma@intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1525777785-9740-7-git-send-email-ankit.k.nautiyal@intel.com
2018-05-11drm/edid: Don't send bogus aspect ratios in AVI infoframesVille Syrjälä1-6/+17
If the user mode would specify an aspect ratio other than 4:3 or 16:9 we now silently ignore it. Maybe a better apporoach is to return an error? Let's try that. Also we must be careful that we don't try to send illegal picture aspect in the infoframe as it's only capable of signalling none, 4:3, and 16:9. Currently we're sending these bogus infoframes whenever the cea mode specifies some other aspect ratio. Cc: Shashank Sharma <shashank.sharma@intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: Jose Abreu <Jose.Abreu@synopsys.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Emil Velikov <emil.l.velikov@gmail.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Shashank Sharma <shashank.sharma@intel.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1525777785-9740-5-git-send-email-ankit.k.nautiyal@intel.com
2018-05-11drm/edid: Fix cea mode aspect ratio handlingVille Syrjälä1-4/+14
commit 6dffd431e229 ("drm: Add aspect ratio parsing in DRM layer") cause us to not send out any VICs in the AVI infoframes. That commit was since reverted, but if and when we add aspect ratio handing back we need to be more careful. Let's handle this by considering the aspect ratio as a requirement for cea mode matching only if the passed in mode actually has a non-zero aspect ratio field. This will keep userspace that doesn't provide an aspect ratio working as before by matching it to the first otherwise equal cea mode. And once userspace starts to provide the aspect ratio it will be considerd a hard requirement for the match. Also change the hdmi mode matching to use drm_mode_match() for consistency, but we don't match on aspect ratio there since the spec doesn't list a specific aspect ratio for those modes. Cc: Shashank Sharma <shashank.sharma@intel.com> Cc: "Lin, Jia" <lin.a.jia@intel.com> Cc: Akashdeep Sharma <akashdeep.sharma@intel.com> Cc: Jim Bride <jim.bride@linux.intel.com> Cc: Jose Abreu <Jose.Abreu@synopsys.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Emil Velikov <emil.l.velikov@gmail.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Shashank Sharma <shashank.sharma@intel.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1525777785-9740-4-git-send-email-ankit.k.nautiyal@intel.com
2018-05-11drm/edid: Use drm_mode_match_no_clocks_no_stereo() for consistentcyVille Syrjälä1-1/+1
Use drm_mode_equal_no_clocks_no_stereo() in drm_match_hdmi_mode_clock_tolerance() for consistency as we also use it in drm_match_hdmi_mode() and the cea mode matching functions. This doesn't actually change anything since the input mode comes from detailed timings and we match it against edid_4k_modes[] which. So none of those modes can have stereo flags set. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Shashank Sharma <shashank.sharma@intel.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1525777785-9740-3-git-send-email-ankit.k.nautiyal@intel.com
2018-05-11drm/modes: Introduce drm_mode_match()Ville Syrjälä1-31/+103
Make mode matching less confusing by allowing the caller to specify which parts of the modes should match via some flags. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Shashank Sharma <shashank.sharma@intel.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1525777785-9740-2-git-send-email-ankit.k.nautiyal@intel.com
2018-05-10drm: panel-orientation-quirks: Convert to use match_string() helperAndy Shevchenko1-4/+3
The new helper returns index of the matching string in an array. We are going to use it here. Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180503184119.22355-1-andriy.shevchenko@linux.intel.com
2018-05-10drm/amd/pp: Fix performance drop on FijiRex Zhu1-3/+1
The performance drop if the default TDP more than 256 Watt Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-05-10Merge branch 'linux-4.17' of git://github.com/skeggsb/linux into drm-fixesDave Airlie4-10/+6
Two nouveau crasher/deadlock fixes. * 'linux-4.17' of git://github.com/skeggsb/linux: drm/nouveau: Fix deadlock in nv50_mstm_register_connector() drm/nouveau/ttm: don't dereference nvbo::cli, it can outlive client
2018-05-10drm/nouveau: Fix deadlock in nv50_mstm_register_connector()Lyude Paul1-4/+3
Currently; we're grabbing all of the modesetting locks before adding MST connectors to fbdev. This isn't actually necessary, and causes a deadlock as well: ====================================================== WARNING: possible circular locking dependency detected 4.17.0-rc3Lyude-Test+ #1 Tainted: G O ------------------------------------------------------ kworker/1:0/18 is trying to acquire lock: 00000000c832f62d (&helper->lock){+.+.}, at: drm_fb_helper_add_one_connector+0x2a/0x60 [drm_kms_helper] but task is already holding lock: 00000000942e28e2 (crtc_ww_class_mutex){+.+.}, at: drm_modeset_backoff+0x8e/0x1c0 [drm] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (crtc_ww_class_mutex){+.+.}: ww_mutex_lock+0x43/0x80 drm_modeset_lock+0x71/0x130 [drm] drm_helper_probe_single_connector_modes+0x7d/0x6b0 [drm_kms_helper] drm_setup_crtcs+0x15e/0xc90 [drm_kms_helper] __drm_fb_helper_initial_config_and_unlock+0x29/0x480 [drm_kms_helper] nouveau_fbcon_init+0x138/0x1a0 [nouveau] nouveau_drm_load+0x173/0x7e0 [nouveau] drm_dev_register+0x134/0x1c0 [drm] drm_get_pci_dev+0x8e/0x160 [drm] nouveau_drm_probe+0x1a9/0x230 [nouveau] pci_device_probe+0xcd/0x150 driver_probe_device+0x30b/0x480 __driver_attach+0xbc/0xe0 bus_for_each_dev+0x67/0x90 bus_add_driver+0x164/0x260 driver_register+0x57/0xc0 do_one_initcall+0x4d/0x323 do_init_module+0x5b/0x1f8 load_module+0x20e5/0x2ac0 __do_sys_finit_module+0xb7/0xd0 do_syscall_64+0x60/0x1b0 entry_SYSCALL_64_after_hwframe+0x49/0xbe -> #2 (crtc_ww_class_acquire){+.+.}: drm_helper_probe_single_connector_modes+0x58/0x6b0 [drm_kms_helper] drm_setup_crtcs+0x15e/0xc90 [drm_kms_helper] __drm_fb_helper_initial_config_and_unlock+0x29/0x480 [drm_kms_helper] nouveau_fbcon_init+0x138/0x1a0 [nouveau] nouveau_drm_load+0x173/0x7e0 [nouveau] drm_dev_register+0x134/0x1c0 [drm] drm_get_pci_dev+0x8e/0x160 [drm] nouveau_drm_probe+0x1a9/0x230 [nouveau] pci_device_probe+0xcd/0x150 driver_probe_device+0x30b/0x480 __driver_attach+0xbc/0xe0 bus_for_each_dev+0x67/0x90 bus_add_driver+0x164/0x260 driver_register+0x57/0xc0 do_one_initcall+0x4d/0x323 do_init_module+0x5b/0x1f8 load_module+0x20e5/0x2ac0 __do_sys_finit_module+0xb7/0xd0 do_syscall_64+0x60/0x1b0 entry_SYSCALL_64_after_hwframe+0x49/0xbe -> #1 (&dev->mode_config.mutex){+.+.}: drm_setup_crtcs+0x10c/0xc90 [drm_kms_helper] __drm_fb_helper_initial_config_and_unlock+0x29/0x480 [drm_kms_helper] nouveau_fbcon_init+0x138/0x1a0 [nouveau] nouveau_drm_load+0x173/0x7e0 [nouveau] drm_dev_register+0x134/0x1c0 [drm] drm_get_pci_dev+0x8e/0x160 [drm] nouveau_drm_probe+0x1a9/0x230 [nouveau] pci_device_probe+0xcd/0x150 driver_probe_device+0x30b/0x480 __driver_attach+0xbc/0xe0 bus_for_each_dev+0x67/0x90 bus_add_driver+0x164/0x260 driver_register+0x57/0xc0 do_one_initcall+0x4d/0x323 do_init_module+0x5b/0x1f8 load_module+0x20e5/0x2ac0 __do_sys_finit_module+0xb7/0xd0 do_syscall_64+0x60/0x1b0 entry_SYSCALL_64_after_hwframe+0x49/0xbe -> #0 (&helper->lock){+.+.}: __mutex_lock+0x70/0x9d0 drm_fb_helper_add_one_connector+0x2a/0x60 [drm_kms_helper] nv50_mstm_register_connector+0x2c/0x50 [nouveau] drm_dp_add_port+0x2f5/0x420 [drm_kms_helper] drm_dp_send_link_address+0x155/0x1e0 [drm_kms_helper] drm_dp_add_port+0x33f/0x420 [drm_kms_helper] drm_dp_send_link_address+0x155/0x1e0 [drm_kms_helper] drm_dp_check_and_send_link_address+0x87/0xd0 [drm_kms_helper] drm_dp_mst_link_probe_work+0x4d/0x80 [drm_kms_helper] process_one_work+0x20d/0x650 worker_thread+0x3a/0x390 kthread+0x11e/0x140 ret_from_fork+0x3a/0x50 other info that might help us debug this: Chain exists of: &helper->lock --> crtc_ww_class_acquire --> crtc_ww_class_mutex Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(crtc_ww_class_mutex); lock(crtc_ww_class_acquire); lock(crtc_ww_class_mutex); lock(&helper->lock); *** DEADLOCK *** 5 locks held by kworker/1:0/18: #0: 000000004a05cd50 ((wq_completion)"events_long"){+.+.}, at: process_one_work+0x187/0x650 #1: 00000000601c11d1 ((work_completion)(&mgr->work)){+.+.}, at: process_one_work+0x187/0x650 #2: 00000000586ca0df (&dev->mode_config.mutex){+.+.}, at: drm_modeset_lock_all+0x3a/0x1b0 [drm] #3: 00000000d3ca0ffa (crtc_ww_class_acquire){+.+.}, at: drm_modeset_lock_all+0x44/0x1b0 [drm] #4: 00000000942e28e2 (crtc_ww_class_mutex){+.+.}, at: drm_modeset_backoff+0x8e/0x1c0 [drm] stack backtrace: CPU: 1 PID: 18 Comm: kworker/1:0 Tainted: G O 4.17.0-rc3Lyude-Test+ #1 Hardware name: Gateway FX6840/FX6840, BIOS P01-A3 05/17/2010 Workqueue: events_long drm_dp_mst_link_probe_work [drm_kms_helper] Call Trace: dump_stack+0x85/0xcb print_circular_bug.isra.38+0x1ce/0x1db __lock_acquire+0x128f/0x1350 ? lock_acquire+0x9f/0x200 ? lock_acquire+0x9f/0x200 ? __ww_mutex_lock.constprop.13+0x8f/0x1000 lock_acquire+0x9f/0x200 ? drm_fb_helper_add_one_connector+0x2a/0x60 [drm_kms_helper] ? drm_fb_helper_add_one_connector+0x2a/0x60 [drm_kms_helper] __mutex_lock+0x70/0x9d0 ? drm_fb_helper_add_one_connector+0x2a/0x60 [drm_kms_helper] ? ww_mutex_lock+0x43/0x80 ? _cond_resched+0x15/0x30 ? ww_mutex_lock+0x43/0x80 ? drm_modeset_lock+0xb2/0x130 [drm] ? drm_fb_helper_add_one_connector+0x2a/0x60 [drm_kms_helper] drm_fb_helper_add_one_connector+0x2a/0x60 [drm_kms_helper] nv50_mstm_register_connector+0x2c/0x50 [nouveau] drm_dp_add_port+0x2f5/0x420 [drm_kms_helper] ? mark_held_locks+0x50/0x80 ? kfree+0xcf/0x2a0 ? drm_dp_check_mstb_guid+0xd6/0x120 [drm_kms_helper] ? trace_hardirqs_on_caller+0xed/0x180 ? drm_dp_check_mstb_guid+0xd6/0x120 [drm_kms_helper] drm_dp_send_link_address+0x155/0x1e0 [drm_kms_helper] drm_dp_add_port+0x33f/0x420 [drm_kms_helper] ? nouveau_connector_aux_xfer+0x7c/0xb0 [nouveau] ? find_held_lock+0x2d/0x90 ? drm_dp_dpcd_access+0xd9/0xf0 [drm_kms_helper] ? __mutex_unlock_slowpath+0x3b/0x280 ? drm_dp_dpcd_access+0xd9/0xf0 [drm_kms_helper] drm_dp_send_link_address+0x155/0x1e0 [drm_kms_helper] drm_dp_check_and_send_link_address+0x87/0xd0 [drm_kms_helper] drm_dp_mst_link_probe_work+0x4d/0x80 [drm_kms_helper] process_one_work+0x20d/0x650 worker_thread+0x3a/0x390 ? process_one_work+0x650/0x650 kthread+0x11e/0x140 ? kthread_create_worker_on_cpu+0x50/0x50 ret_from_fork+0x3a/0x50 Taking example from i915, the only time we need to hold any modesetting locks is when changing the port on the mstc, and in that case we only need to hold the connection mutex. Signed-off-by: Lyude Paul <lyude@redhat.com> Cc: Karol Herbst <kherbst@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2018-05-10drm/nouveau/ttm: don't dereference nvbo::cli, it can outlive clientBen Skeggs3-6/+3
Potentially responsible for some random OOPSes. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Cc: stable@vger.kernel.org [v4.15+]
2018-05-10Merge branch 'drm-fixes-4.17' of git://people.freedesktop.org/~agd5f/linux into drm-fixesDave Airlie13-95/+364
A little bigger than normal since this is two weeks of fixes. - Atom firmware table updates for vega12 - Fix fallout from huge page support - Fix up smu7 power profile interface to be consistent with vega - Misc other fixes * 'drm-fixes-4.17' of git://people.freedesktop.org/~agd5f/linux: drm/amd/pp: Refine the output of pp_power_profile_mode on VI drm/amdgpu: Switch to interruptable wait to recover from ring hang. drm/ttm: Use GFP_TRANSHUGE_LIGHT for allocating huge pages drm/amd/display: Use kvzalloc for potentially large allocations drm/amd/display: Don't return ddc result and read_bytes in same return value drm/amd/display: Add get_firmware_info_v3_2 for VG12 drm/amd: Add BIOS smu_info v3_3 required struct def. drm/amd/display: Add VG12 ASIC IDs
2018-05-10Merge tag 'drm-misc-fixes-2018-05-09' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixesDave Airlie11-16/+69
atomic: Clear state pointers on clear (Ville) vc4: Fix oops in dpi disable (Eric) omap: Various error-checking + uninitialized var fixes (Tomi) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Eric Anholt <eric@anholt.net> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> * tag 'drm-misc-fixes-2018-05-09' of git://anongit.freedesktop.org/drm/drm-misc: drm/vc4: Fix scaling of uni-planar formats drm/bridge/sii8620: add Kconfig dependency on extcon drm/omap: handle alloc failures in omap_connector drm/omap: add missing linefeeds to prints drm/omap: handle error if scale coefs are not found drm/omap: check return value from soc_device_match drm/omap: fix possible NULL ref issue in tiler_reserve_2d drm/omap: fix uninitialized ret variable drm/omap: silence unititialized variable warning drm/vc4: Fix oops dereferencing DPI's connector since panel_bridge. drm/atomic: Clean private obj old_state/new_state in drm_atomic_state_default_clear() drm/atomic: Clean old_state/new_state in drm_atomic_state_default_clear()
2018-05-10Merge tag 'drm-intel-fixes-2018-05-09' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixesDave Airlie4-25/+41
- Increase LVDS panel timeout to 5s to avoid spurious *ERROR* - Fix 2 WARNS: BIOS framebuffer related (FDO #105992) and eDP cdclk mismatch * tag 'drm-intel-fixes-2018-05-09' of git://anongit.freedesktop.org/drm/drm-intel: drm/i915: Fix drm:intel_enable_lvds ERROR message in kernel log drm/i915: Correctly populate user mode h/vdisplay with pipe src size during readout drm/i915: Adjust eDP's logical vco in a reliable place.
2018-05-10drm/exynos: Add driver for Exynos Scaler moduleAndrzej Pietrasiewicz6-0/+1131
Exynos Scaler is a hardware module, which processes graphic data fetched from memory and transfers the resultant dato another memory buffer. Graphics data can be up/down-scaled, rotated, flipped and converted color space. Scaler hardware modules are a part of Exynos5420 and newer Exynos SoCs. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2018-05-10drm/exynos: fimc: Convert driver to IPP v2 core APIMarek Szyprowski5-756/+366
This patch adapts Exynos DRM FIMC driver to new IPP v2 core API. The side effect of this conversion is a switch to driver component API to register properly in the Exynos DRM core. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Merge conflict so merged manually. Signed-off-by: Inki Dae <inki.dae@samsung.com>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.