| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The DP (display processor) channel disable code tried to busy wait for
the DP sync flow end interrupt status bit when disabling the partial
plane without a full modeset. That never worked reliably, and it was
disabled completely by the recent "gpu: ipu-v3: remove IRQ dance on DC
channel disable" patch, causing ipu_wait_interrupt to always time out
after 50 ms, which in turn would trigger a timeout in
drm_atomic_helper_wait_for_vblanks.
This patch changes ipu_plane_atomic_disable to only queue a DP channel
register update at the next frame boundary and set a flag, which can be
done without any waiting whatsoever. The imx_drm_atomic_commit_tail then
calls a new ipu_plane_disable_deferred function that does the actual
IDMAC teardown of the planes that are flagged for deferred disabling,
after waiting for the vblank.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
|
|
drm_atomic_helper_cleanup_planes only calls the cleanup_fb plane
helpers, which we don't implement as a CMA framebuffer based driver.
There is no reason to wait for vblanks in commit_tail only to do nothing
afterwards.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
|
|
When disabling the foreground DP channel during a modeset, the DC is
already disabled without waiting for end of frame. There is no reason
to wait for a frame boundary before updating the DP registers in that
case.
Add support to apply updates immediately. No functional changes, yet.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
|
|
This has never worked properly, as the IRQ got retriggered immediately
on unmask. Remove the IRQ wait dance, as it is apparently safe to disable
the DC channel at any point in time.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
The IPU does not natively understand bayer formats, but it can pass them
through unchanged. Add support for setting the image base address and
cropping offset to ipu_cpmem_set_image.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
Otherwise, if the image base address is kept at zero, and if the user
ignores the error return value, the IPU may be configured to write into
the dma-apbh@00110000 region for large frames, which will lock up the
system.
Reported-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
Previously, the overlay plane position would only be updated when the
plane was first enabled or during a modeset. We can instruct the DP to
move the plane also when just updating the EBA.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
Use drm_plane_helper_check_state to clip raw user coordinates to crtc
bounds. This checks for full plane coverage and scaling already, so
we can drop some custom checks. Use the clipped coordinates everywhere.
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
`guc_firmware_path` and `huc_firmware_path` module parameters are added.
Using the parameter disables version checks and loads desired firmware
instead of the default one.
v2: make params unsafe && notice about disabled fw check (J. Lahtinen)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Signed-off-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
intel_{h,g}uc_init_fw selects correct firmware and then triggers it's
preparation (fetch + initial parsing).
This change separates out select steps, so those can be called by
the sanitize_options().
Then, during the init_fw(), we prepare the firmware if the firmware was
selected.
Cc: Michal Winiarski <michal.winiarski@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
Currently fw->path values can represent one of three possible states:
1) NULL - device without the uC
2) '\0' - device with the uC but have no firmware
3) else - device with the uC and we have firmware
Second case is used only to WARN at a later stage.
We can WARN right away and merge cases 1 and 2.
Code can be even further simplified and common (HuC/GuC logic) happening
right before the fetch can be offloaded to the common function.
v2: fewer temporary variables, more straightforward flow (M. Wajdeczko)
v3: DRM_ERROR instead of WARN (M. Wajdeczko)
v4: coding standard (J. Lahtinen)
v5: non-trivial rebase
v6: remove path check, we are checking fetch status (M. Wajdeczko)
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
Current version of intel_guc_init_hw() does a lot:
- cares about submission
- loads huc
- implement WA
This change offloads some of the logic to intel_uc_init_hw(), which now
cares about the above.
v2: rename guc_hw_reset and fix typo in define name (M. Wajdeczko)
v3: rename once again
v4: remove spurious comments and add some style (J. Lahtinen)
v5: flow changes, got rid of dead checks (M. Wajdeczko)
v6: rebase
v7: rebase & onion teardown (J. Lahtinen)
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
Let intel_guc_init_fw() focus on determining and fetching the correct
firmware.
This patch introduces intel_uc_sanitize_options() that is called from
intel_sanitize_options().
Then, if we have GuC, we can call intel_guc_init_fw() conditionally
and we do not have to do the internal checks.
v2: fix comment, notify when nuking GuC explicitly enabled (M. Wajdeczko)
v3: fix comment again, change the nuke message (M. Wajdeczko)
v4: update title to reflect new function name + rebase
v5: text && remove 2 uneccessary checks (M. Wajdeczko)
Cc: Michal Winiarski <michal.winiarski@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
Instead of calling intel_guc_init() and intel_huc_init() one by one this
patch introduces intel_uc_init_fw() function that calls them both.
Called functions are renamed accordingly.
Trying to have subject_verb_object ordering and more descriptive names,
the intel_huc_init() and intel_guc_init() functions are renamed.
For guc_init():
* `intel_guc` is the subject, so those functions now take intel_guc
structure, instead of the dev_priv
* init is the verb
* fw is the object which better describes the function's role
huc_init() change follows the same reasoning.
v2: settle on intel_uc_fetch_fw name (M. Wajdeczko)
v3: yet another rename - intel_uc_init_fw (J. Lahtinen)
v4: non-trivial rebase
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Signed-off-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
The file fits better.
Additionally rename it to intel_uc_prepare_fw(), as the function does
more than simple fetch.
`obj` cleanup in the function is also fixed (i.e. removed). In the fail
scenario it was always 'put' but there's no possible flow that
initializes the obj properly and then goes to the fail label.
v2: remove second declaration, reorder (M. Wajdeczko)
v3: non-trivial rebase
v4: remove obj cleanup in the fail scenario (C. Wilson)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
GuC historically has two "startup" functions called _init() and _setup()
Then HuC came with it's _init() and _load().
This commit renames intel_guc_setup() and intel_huc_load() to
*uc_init_hw() as they called from the i915_gem_init_hw().
The aim is to be consistent in that entry points called during
particular driver init phases (e.g. init_hw) are all suffixed by that
phase. When reading the leaf functions, it should be clear at what stage
during the driver load it is called and therefore what operations are
legal at that point.
Also, since the functions start with intel_guc and intel_huc they take
appropiate structure.
v2: commit message update (Chris Wilson)
v3: change taken parameters to be more "semantic" (M. Wajdeczko)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
Used to obtain "dev_priv" from huc struct pointer.
We already have similar thing for guc.
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
Externs are implicit and we generally try to avoid them.
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
Geminilake's DMC is not yet available in the linux-firmware repository.
To prevent userspace tools such as mkinitramfs to complain about
missing firmware, remove the MODULE_FIRMWARE() tag for now.
Fixes: dbb28b5c3d3c ("drm/i915/DMC/GLK: Load DMC on GLK")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: <drm-intel-fixes@lists.freedesktop.org>
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170306085651.14008-1-ander.conselvan.de.oliveira@intel.com
Link: http://patchwork.freedesktop.org/patch/msgid/20170315095747.21845-1-ander.conselvan.de.oliveira@intel.com
(cherry picked from commit d9321a03efcda867b3a8c6327e01808516f0acd7)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
drm/i915 fixes for v4.11-rc3
* tag 'drm-intel-fixes-2017-03-14' of git://anongit.freedesktop.org/git/drm-intel:
drm/i915: Fix forcewake active domain tracking
drm/i915: Nuke skl_update_plane debug message from the pipe update critical section
drm/i915: use correct node for handling cache domain eviction
drm/i915: Drain the freed state from the tail of the next commit
drm/i915: Nuke debug messages from the pipe update critical section
drm/i915: Use pagecache write to prepopulate shmemfs from pwrite-ioctl
drm/i915: Store a permanent error in obj->mm.pages
drm/i915: Move updating color management to before vblank evasion
drm/i915/gen9: Increase PCODE request timeout to 50ms
drm/i915: Avoid tweaking evaluation thresholds on Baytrail v3
drm/i915: Remove the vma from the drm_mm if binding fails
drm/i915/fbdev: Stop repeating tile configuration on stagnation
drm/i915/glk: Fix watermark computations for third sprite plane
drm/i915: Squelch any ktime/jiffie rounding errors for wait-ioctl
|
|
More drm-misc stuff for 4.12:
- drm_platform removal from Laurent
- more dw-hdmi bridge driver updates (Laurent, Kieran, Neil)
- more header cleanup and documentation
- more drm_debugs_remove_files removal (Noralf)
- minor qxl updates (Gerd)
- edp crc support in helper + analogix_dp (Tomeu) for more igt
testing!
- old/new iterator roll-out (Maarten)
- new bridge drivers: lvds (Laurent), megachips-something (Peter
Senna)
* tag 'drm-misc-next-2017-03-12' of git://anongit.freedesktop.org/git/drm-misc: (51 commits)
drm: bridge: dw-hdmi: Move the driver to a separate directory.
drm: bridge: dw-hdmi: Switch to regmap for register access
drm: bridge: dw-hdmi: Remove device type from platform data
drm: bridge: dw-hdmi: Add support for custom PHY configuration
drm: bridge: dw-hdmi: Create PHY operations
drm: bridge: dw-hdmi: Fix the PHY power up sequence
drm: bridge: dw-hdmi: Fix the PHY power down sequence
drm: bridge: dw-hdmi: Enable CSC even for DVI
drm: bridge: dw-hdmi: Move CSC configuration out of PHY code
drm: bridge: dw-hdmi: Remove unused functions
drm: Extract drm_file.h
drm: Remove DRM_MINOR_CNT
drm: rename drm_fops.c to drm_file.c
drm/doc: document fallback behaviour for atomic events
drm: Remove drmP.h include from drm_kms_helper_common.c
drm: Extract drm_pci.h
drm: Move drm_lock_data out of drmP.h
drm: Extract drm_prime.h
drm/doc: Add todo about connector_list_iter
drm/qxl: Remove qxl_debugfs_remove_files()
...
|
|
* 'for-upstream/malidp-fixes' of git://linux-arm.org/linux-ld:
drm: mali-dp: Fix smart layer not going to composition
drm: mali-dp: Remove mclk rate management
|
|
omapdrm fixes for v4.11
- Fix types in omapdrm uapi header to avoid userspace compilation errors
- Fix dmabuf mmap for dma_alloc'ed buffers
* tag 'omapdrm-4.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux:
uapi: fix drm/omap_drm.h userspace compilation errors
drm/omap: fix dmabuf mmap for dma_alloc'ed buffers
|
|
drm/tilcdc fixes for Linux v4.11
* tag 'tilcdc-4.11-fixes' of https://github.com/jsarha/linux:
drm/tilcdc: Set framebuffer DMA address to HW only if CRTC is enabled
drm/tilcdc: Fix hardcoded fail-return value in tilcdc_crtc_create()
|
|
The AMD ACP driver adds "-I../acp -I../acp/include" to the gcc command
line, which makes no sense, since these are evaluated relative to the
build directory. When we build with "make W=1", they instead cause
a warning:
cc1: error: ../acp/: No such file or directory [-Werror=missing-include-dirs]
cc1: error: ../acp/include: No such file or directory [-Werror=missing-include-dirs]
cc1: all warnings being treated as errors
../scripts/Makefile.build:289: recipe for target 'drivers/gpu/drm/amd/amdgpu/amdgpu_drv.o' failed
../scripts/Makefile.build:289: recipe for target 'drivers/gpu/drm/amd/amdgpu/amdgpu_device.o' failed
../scripts/Makefile.build:289: recipe for target 'drivers/gpu/drm/amd/amdgpu/amdgpu_kms.o' failed
This removes the subdir-ccflags variable that evidently did not
serve any purpose here.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Check that the sink really declared 12bpc support before we enable it.
This should not actually never happen since it's mandatory for HDMI
sinks to support 12bpc if they support any deep color modes. But
reality disagrees with the theory and there are actually sinks in
the wild that violate the spec.
v2: Fix the output_types check
Update commit message to state that these things are in fact real
Cc: stable@vger.kernel.org
Cc: Nicholas Sielicki <nicholas.sielicki@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99250
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170213175818.24958-1-ville.syrjala@linux.intel.com
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
(cherry picked from commit c750bdd3e7e204cc88b32806c3864487a03cd84b)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
The rcu_barrier() takes the cpu_hotplug mutex which itself is not
reclaim-safe, and so rcu_barrier() is illegal from inside the shrinker.
[ 309.661373] =========================================================
[ 309.661376] [ INFO: possible irq lock inversion dependency detected ]
[ 309.661380] 4.11.0-rc1-CI-CI_DRM_2333+ #1 Tainted: G W
[ 309.661383] ---------------------------------------------------------
[ 309.661386] gem_exec_gttfil/6435 just changed the state of lock:
[ 309.661389] (rcu_preempt_state.barrier_mutex){+.+.-.}, at: [<ffffffff81100731>] _rcu_barrier+0x31/0x160
[ 309.661399] but this lock took another, RECLAIM_FS-unsafe lock in the past:
[ 309.661402] (cpu_hotplug.lock){+.+.+.}
[ 309.661404]
and interrupts could create inverse lock ordering between them.
[ 309.661410]
other info that might help us debug this:
[ 309.661414] Possible interrupt unsafe locking scenario:
[ 309.661417] CPU0 CPU1
[ 309.661419] ---- ----
[ 309.661421] lock(cpu_hotplug.lock);
[ 309.661425] local_irq_disable();
[ 309.661432] lock(rcu_preempt_state.barrier_mutex);
[ 309.661441] lock(cpu_hotplug.lock);
[ 309.661446] <Interrupt>
[ 309.661448] lock(rcu_preempt_state.barrier_mutex);
[ 309.661453]
*** DEADLOCK ***
[ 309.661460] 4 locks held by gem_exec_gttfil/6435:
[ 309.661464] #0: (sb_writers#10){.+.+.+}, at: [<ffffffff8120d83d>] vfs_write+0x17d/0x1f0
[ 309.661475] #1: (debugfs_srcu){......}, at: [<ffffffff81320491>] debugfs_use_file_start+0x41/0xa0
[ 309.661486] #2: (&attr->mutex){+.+.+.}, at: [<ffffffff8123a3e7>] simple_attr_write+0x37/0xe0
[ 309.661495] #3: (&dev->struct_mutex){+.+.+.}, at: [<ffffffffa0091b4a>] i915_drop_caches_set+0x3a/0x150 [i915]
[ 309.661540]
the shortest dependencies between 2nd lock and 1st lock:
[ 309.661547] -> (cpu_hotplug.lock){+.+.+.} ops: 829 {
[ 309.661553] HARDIRQ-ON-W at:
[ 309.661560] __lock_acquire+0x5e5/0x1b50
[ 309.661565] lock_acquire+0xc9/0x220
[ 309.661572] __mutex_lock+0x6e/0x990
[ 309.661576] mutex_lock_nested+0x16/0x20
[ 309.661583] get_online_cpus+0x61/0x80
[ 309.661590] kmem_cache_create+0x25/0x1d0
[ 309.661596] debug_objects_mem_init+0x30/0x249
[ 309.661602] start_kernel+0x341/0x3fe
[ 309.661607] x86_64_start_reservations+0x2a/0x2c
[ 309.661612] x86_64_start_kernel+0x173/0x186
[ 309.661619] verify_cpu+0x0/0xfc
[ 309.661622] SOFTIRQ-ON-W at:
[ 309.661627] __lock_acquire+0x611/0x1b50
[ 309.661632] lock_acquire+0xc9/0x220
[ 309.661636] __mutex_lock+0x6e/0x990
[ 309.661641] mutex_lock_nested+0x16/0x20
[ 309.661646] get_online_cpus+0x61/0x80
[ 309.661650] kmem_cache_create+0x25/0x1d0
[ 309.661655] debug_objects_mem_init+0x30/0x249
[ 309.661660] start_kernel+0x341/0x3fe
[ 309.661664] x86_64_start_reservations+0x2a/0x2c
[ 309.661669] x86_64_start_kernel+0x173/0x186
[ 309.661674] verify_cpu+0x0/0xfc
[ 309.661677] RECLAIM_FS-ON-W at:
[ 309.661682] mark_held_locks+0x6f/0xa0
[ 309.661687] lockdep_trace_alloc+0xb3/0x100
[ 309.661693] kmem_cache_alloc_trace+0x31/0x2e0
[ 309.661699] __smpboot_create_thread.part.1+0x27/0xe0
[ 309.661704] smpboot_create_threads+0x61/0x90
[ 309.661709] cpuhp_invoke_callback+0x9c/0x8a0
[ 309.661713] cpuhp_up_callbacks+0x31/0xb0
[ 309.661718] _cpu_up+0x7a/0xc0
[ 309.661723] do_cpu_up+0x5f/0x80
[ 309.661727] cpu_up+0xe/0x10
[ 309.661734] smp_init+0x71/0xb3
[ 309.661738] kernel_init_freeable+0x94/0x19e
[ 309.661743] kernel_init+0x9/0xf0
[ 309.661748] ret_from_fork+0x2e/0x40
[ 309.661752] INITIAL USE at:
[ 309.661757] __lock_acquire+0x234/0x1b50
[ 309.661761] lock_acquire+0xc9/0x220
[ 309.661766] __mutex_lock+0x6e/0x990
[ 309.661771] mutex_lock_nested+0x16/0x20
[ 309.661775] get_online_cpus+0x61/0x80
[ 309.661780] __cpuhp_setup_state+0x44/0x170
[ 309.661785] page_alloc_init+0x23/0x3a
[ 309.661790] start_kernel+0x124/0x3fe
[ 309.661794] x86_64_start_reservations+0x2a/0x2c
[ 309.661799] x86_64_start_kernel+0x173/0x186
[ 309.661804] verify_cpu+0x0/0xfc
[ 309.661807] }
[ 309.661813] ... key at: [<ffffffff81e37690>] cpu_hotplug+0xb0/0x100
[ 309.661817] ... acquired at:
[ 309.661821] lock_acquire+0xc9/0x220
[ 309.661825] __mutex_lock+0x6e/0x990
[ 309.661829] mutex_lock_nested+0x16/0x20
[ 309.661833] get_online_cpus+0x61/0x80
[ 309.661837] _rcu_barrier+0x9f/0x160
[ 309.661841] rcu_barrier+0x10/0x20
[ 309.661847] netdev_run_todo+0x5f/0x310
[ 309.661852] rtnl_unlock+0x9/0x10
[ 309.661856] default_device_exit_batch+0x133/0x150
[ 309.661862] ops_exit_list.isra.0+0x4d/0x60
[ 309.661866] cleanup_net+0x1d8/0x2c0
[ 309.661872] process_one_work+0x1f4/0x6d0
[ 309.661876] worker_thread+0x49/0x4a0
[ 309.661881] kthread+0x107/0x140
[ 309.661884] ret_from_fork+0x2e/0x40
[ 309.661890] -> (rcu_preempt_state.barrier_mutex){+.+.-.} ops: 179 {
[ 309.661896] HARDIRQ-ON-W at:
[ 309.661901] __lock_acquire+0x5e5/0x1b50
[ 309.661905] lock_acquire+0xc9/0x220
[ 309.661910] __mutex_lock+0x6e/0x990
[ 309.661914] mutex_lock_nested+0x16/0x20
[ 309.661919] _rcu_barrier+0x31/0x160
[ 309.661923] rcu_barrier+0x10/0x20
[ 309.661928] netdev_run_todo+0x5f/0x310
[ 309.661932] rtnl_unlock+0x9/0x10
[ 309.661936] default_device_exit_batch+0x133/0x150
[ 309.661941] ops_exit_list.isra.0+0x4d/0x60
[ 309.661946] cleanup_net+0x1d8/0x2c0
[ 309.661951] process_one_work+0x1f4/0x6d0
[ 309.661955] worker_thread+0x49/0x4a0
[ 309.661960] kthread+0x107/0x140
[ 309.661964] ret_from_fork+0x2e/0x40
[ 309.661968] SOFTIRQ-ON-W at:
[ 309.661972] __lock_acquire+0x611/0x1b50
[ 309.661977] lock_acquire+0xc9/0x220
[ 309.661981] __mutex_lock+0x6e/0x990
[ 309.661986] mutex_lock_nested+0x16/0x20
[ 309.661990] _rcu_barrier+0x31/0x160
[ 309.661995] rcu_barrier+0x10/0x20
[ 309.661999] netdev_run_todo+0x5f/0x310
[ 309.662003] rtnl_unlock+0x9/0x10
[ 309.662008] default_device_exit_batch+0x133/0x150
[ 309.662013] ops_exit_list.isra.0+0x4d/0x60
[ 309.662017] cleanup_net+0x1d8/0x2c0
[ 309.662022] process_one_work+0x1f4/0x6d0
[ 309.662027] worker_thread+0x49/0x4a0
[ 309.662031] kthread+0x107/0x140
[ 309.662035] ret_from_fork+0x2e/0x40
[ 309.662039] IN-RECLAIM_FS-W at:
[ 309.662043] __lock_acquire+0x638/0x1b50
[ 309.662048] lock_acquire+0xc9/0x220
[ 309.662053] __mutex_lock+0x6e/0x990
[ 309.662058] mutex_lock_nested+0x16/0x20
[ 309.662062] _rcu_barrier+0x31/0x160
[ 309.662067] rcu_barrier+0x10/0x20
[ 309.662089] i915_gem_shrink_all+0x33/0x40 [i915]
[ 309.662109] i915_drop_caches_set+0x141/0x150 [i915]
[ 309.662114] simple_attr_write+0xc7/0xe0
[ 309.662119] full_proxy_write+0x4f/0x70
[ 309.662124] __vfs_write+0x23/0x120
[ 309.662128] vfs_write+0xc6/0x1f0
[ 309.662133] SyS_write+0x44/0xb0
[ 309.662138] entry_SYSCALL_64_fastpath+0x1c/0xb1
[ 309.662142] INITIAL USE at:
[ 309.662147] __lock_acquire+0x234/0x1b50
[ 309.662151] lock_acquire+0xc9/0x220
[ 309.662156] __mutex_lock+0x6e/0x990
[ 309.662160] mutex_lock_nested+0x16/0x20
[ 309.662165] _rcu_barrier+0x31/0x160
[ 309.662169] rcu_barrier+0x10/0x20
[ 309.662174] netdev_run_todo+0x5f/0x310
[ 309.662178] rtnl_unlock+0x9/0x10
[ 309.662183] default_device_exit_batch+0x133/0x150
[ 309.662188] ops_exit_list.isra.0+0x4d/0x60
[ 309.662192] cleanup_net+0x1d8/0x2c0
[ 309.662197] process_one_work+0x1f4/0x6d0
[ 309.662202] worker_thread+0x49/0x4a0
[ 309.662206] kthread+0x107/0x140
[ 309.662210] ret_from_fork+0x2e/0x40
[ 309.662214] }
[ 309.662220] ... key at: [<ffffffff81e4e1c8>] rcu_preempt_state+0x508/0x780
[ 309.662225] ... acquired at:
[ 309.662229] check_usage_forwards+0x12b/0x130
[ 309.662233] mark_lock+0x360/0x6f0
[ 309.662237] __lock_acquire+0x638/0x1b50
[ 309.662241] lock_acquire+0xc9/0x220
[ 309.662245] __mutex_lock+0x6e/0x990
[ 309.662249] mutex_lock_nested+0x16/0x20
[ 309.662253] _rcu_barrier+0x31/0x160
[ 309.662257] rcu_barrier+0x10/0x20
[ 309.662279] i915_gem_shrink_all+0x33/0x40 [i915]
[ 309.662298] i915_drop_caches_set+0x141/0x150 [i915]
[ 309.662303] simple_attr_write+0xc7/0xe0
[ 309.662307] full_proxy_write+0x4f/0x70
[ 309.662311] __vfs_write+0x23/0x120
[ 309.662315] vfs_write+0xc6/0x1f0
[ 309.662319] SyS_write+0x44/0xb0
[ 309.662323] entry_SYSCALL_64_fastpath+0x1c/0xb1
[ 309.662329]
stack backtrace:
[ 309.662335] CPU: 1 PID: 6435 Comm: gem_exec_gttfil Tainted: G W 4.11.0-rc1-CI-CI_DRM_2333+ #1
[ 309.662342] Hardware name: Hewlett-Packard HP Compaq 8100 Elite SFF PC/304Ah, BIOS 786H1 v01.13 07/14/2011
[ 309.662348] Call Trace:
[ 309.662354] dump_stack+0x67/0x92
[ 309.662359] print_irq_inversion_bug.part.19+0x1a4/0x1b0
[ 309.662365] check_usage_forwards+0x12b/0x130
[ 309.662369] mark_lock+0x360/0x6f0
[ 309.662374] ? print_shortest_lock_dependencies+0x1a0/0x1a0
[ 309.662379] __lock_acquire+0x638/0x1b50
[ 309.662383] ? __mutex_unlock_slowpath+0x3e/0x2e0
[ 309.662388] ? trace_hardirqs_on+0xd/0x10
[ 309.662392] ? _rcu_barrier+0x31/0x160
[ 309.662396] lock_acquire+0xc9/0x220
[ 309.662400] ? _rcu_barrier+0x31/0x160
[ 309.662404] ? _rcu_barrier+0x31/0x160
[ 309.662409] __mutex_lock+0x6e/0x990
[ 309.662412] ? _rcu_barrier+0x31/0x160
[ 309.662416] ? _rcu_barrier+0x31/0x160
[ 309.662421] ? synchronize_rcu_expedited+0x35/0xb0
[ 309.662426] ? _raw_spin_unlock_irqrestore+0x52/0x60
[ 309.662434] mutex_lock_nested+0x16/0x20
[ 309.662438] _rcu_barrier+0x31/0x160
[ 309.662442] rcu_barrier+0x10/0x20
[ 309.662464] i915_gem_shrink_all+0x33/0x40 [i915]
[ 309.662484] i915_drop_caches_set+0x141/0x150 [i915]
[ 309.662489] simple_attr_write+0xc7/0xe0
[ 309.662494] full_proxy_write+0x4f/0x70
[ 309.662498] __vfs_write+0x23/0x120
[ 309.662503] ? rcu_read_lock_sched_held+0x75/0x80
[ 309.662507] ? rcu_sync_lockdep_assert+0x2a/0x50
[ 309.662512] ? __sb_start_write+0x102/0x210
[ 309.662516] ? vfs_write+0x17d/0x1f0
[ 309.662520] vfs_write+0xc6/0x1f0
[ 309.662524] ? trace_hardirqs_on_caller+0xe7/0x200
[ 309.662529] SyS_write+0x44/0xb0
[ 309.662533] entry_SYSCALL_64_fastpath+0x1c/0xb1
[ 309.662537] RIP: 0033:0x7f507eac24a0
[ 309.662541] RSP: 002b:00007fffda8720e8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[ 309.662548] RAX: ffffffffffffffda RBX: ffffffff81482bd3 RCX: 00007f507eac24a0
[ 309.662552] RDX: 0000000000000005 RSI: 00007fffda8720f0 RDI: 0000000000000005
[ 309.662557] RBP: ffffc9000048bf88 R08: 0000000000000000 R09: 000000000000002c
[ 309.662561] R10: 0000000000000014 R11: 0000000000000246 R12: 00007fffda872230
[ 309.662566] R13: 00007fffda872228 R14: 0000000000000201 R15: 00007fffda8720f0
[ 309.662572] ? __this_cpu_preempt_check+0x13/0x20
Fixes: 0eafec6d3244 ("drm/i915: Enable lockless lookup of request tracking via RCU")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100192
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: <stable@vger.kernel.org> # v4.9+
Link: http://patchwork.freedesktop.org/patch/msgid/20170314115019.18127-1-chris@chris-wilson.co.uk
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Pointer for Markus's image conversion work.
We need this so we can merge all the pretty drm graphs for 4.12.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
|
|
The 33rd entry in the pre-CSC gamma table in Geminilake can represent a
value of 1.0 as 17 bits fixed point with one integer bit. However, the
table was generated such that the value of 1.0 would be 0.ffff with
all the intervals scaled accordingly. For instance, 0.5 mapped to
0.7fff instead of 0.8000.
For a reason that is not clear to the author, the rounding seems to be
different when a cursor plane is used, leading to some seemingly random
failures of the kms_cursor_crc igt tests. The differences weren't
perceptible at 8bpc with images captured by a Chamelium device, but did
cause CRC mismatches.
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170310101835.29845-1-ander.conselvan.de.oliveira@intel.com
|
|
Sadly there's only 1 driver which can use it, everyone else is special
for some reason:
- gma500 has a horrible runtime PM ioctl wrapper that probably doesn't
really work but meh.
- i915 needs special compat_ioctl handler because regrets.
- arcgpu needs to fixup the pgprot because (no idea why it can't do
that in the fault handler like everyone else).
- tegra does even worse stuff with pgprot
- udl does something with vm_flags too ...
- cma helpers, etnaviv, mtk, msm, rockchip, omap all implement some
variation on prefaulting.
- exynos is exynos, I got lost in the midlayers.
- vc4 has to reinvent half of cma helpers because those are too much
midlayer, plus vm_flags dances.
- vgem also seems unhappy with the default vm_flags.
So pretty sad divergence and I'm sure we could do better, but not
really an idea. Oh well, maybe this macro here helps to encourage more
consistency at least going forward.
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Liviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170308141257.12119-25-daniel.vetter@ffwll.ch
|
|
Less code ftw.
This converts all drivers except the tinydrm helper module. That one
needs more work, since it gets the THIS_MODULE reference from
tinydrm.ko instead of the actual driver module like it should.
Probably needs a similar trick like I used here with generating the
entire struct with a macro.
Cc: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Liviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170308141257.12119-24-daniel.vetter@ffwll.ch
|
|
I didn't spot anything that would require ordering here (well not
anywhere else either), and I'm trying to unify at least modern drivers
on one close hook.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Liviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170308141257.12119-18-daniel.vetter@ffwll.ch
|
|
Well, mostly drm_file.h, and clean up all related things:
- I didnt' figure out the difference between preclose and postclose.
The existing explanation in drm-internals.rst didn't convince me,
since it's also really outdated - we clean up pending DRM events in
the core nowadays. I put a FIXME in for the future.
- Another FIXME is to have a macro for default fops.
- Lots of links all around, main areas are to tie the overview in
drm_file.c more into the callbacks in struct drm_device, and the
other is to link render/primary node code to the right sections in
drm-uapi.rst.
- Also moved the open/close stuff to drm_drv.h from drm-internals.rst,
seems like the better place for that information. Since that section
was rather outdated this amounted to full-on rewrite.
A big missing piece here is some overview graph, but I think better to
wait with that one until drm_device and drm_driver are also fully
documented.
v2: Nits from Sean.
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Liviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170308141257.12119-12-daniel.vetter@ffwll.ch
|
|
We might as well dump the drm_file pointer, that's about as useful
a cookie as the pid. Noticed while typing docs for drm_file and friends.
Since the only consumer of this is the tracepoints I think we can safely
change this - those tracepoints should not be uapi relevant at all. It
all goes back to
commit b9c2c9ae882f058084e13e339925dbf8d2d20271
Author: Jesse Barnes <jbarnes@virtuousgeek.org>
Date: Thu Jul 1 16:48:09 2010 -0700
drm: add per-event vblank event trace points
which doesn't give a special justification for using pid over a pointer.
Also note that the nouveau code setting it is entirely pointless:
Since this isn't a vblank event, it will never hit the vblank
tracepoints.
Cc: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Liviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170308141257.12119-11-daniel.vetter@ffwll.ch
|
|
There's really not a reason afaics that we can't just clean up
everything at the end, in the terminal postclose hook: Since this is
closing a file descriptor we know no one else can have a reference or
a thread doing something with that drm_file except the close code.
Ordering shouldn't matter, as long as we don't kfree before we clean
stuff up.
In the past this was more relevant when drivers still had to track and
clean up pending drm events, but that's all done by the core now.
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Liviu Dudau <Liviu.Dudau@arm.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170308141257.12119-13-daniel.vetter@ffwll.ch
|
|
As i915_gem_reset_finish() undoes the steps from
i915_gem_reset_prepare() to leave the system in a fully-working state,
e.g. to be able to free the breadcrumb signal threads, make sure that we
always call it even on the error path.
Fixes: da9a796f5475 ("drm/i915: Split GEM resetting into 3 phases")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170212172002.23072-2-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
(cherry picked from commit 8d613c539c74fa9055f88f4116196d7c820bd98f)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Touching HW while clocks are off is a serious error and for instance
breaks suspend functionality. After this patch tilcdc_crtc_update_fb()
always updates the primary plane's framebuffer pointer, increases fb's
reference count and stores vblank event. tilcdc_crtc_update_fb() only
writes the fb's DMA address to HW if the crtc is enabled, as
tilcdc_crtc_enable() takes care of writing the address on enable.
This patch also refactors the tilcdc_crtc_update_fb() a bit. Number of
subsequent small changes had made it almost unreadable. There should
be no other functional changes but checking the CRTC's enable
state. However, the locking goes a bit differently and some of the
redundant checks have been removed in this new version.
The enable_lock should be enough to protect the access to
tilcdc_crtc->enabled. The irq_lock protects the access to last_vblank
and next_fb. The check for vrefresh and last_vblank being valid is
redundant, as the vrefresh should be always valid if the CRTC is
enabled and now last_vblank should be too, because it is initialized
to current time when CRTC raster is enabled. If for some reason the
values are not correctly initialized the division by zero warning is
quite appropriate.
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
|
|
Fix badly hardcoded return return value under fail-label. All goto
branches to the label set the "ret"-variable accordingly.
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
|
|
My static checker complains that "release" is uninitialized if
qxl_alloc_release_reserved() fails, so let's add a check for that.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170314075410.GB5984@mwanda
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
kmem_cache_alloc returns NULL on error, not ERR_PTR.
Fixes: f5985bf9cadd4e3ed8d5d9a9cbbb2e39cdb81cd9
Reported-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1489393346-13874-1-git-send-email-kraxel@redhat.com
|
|
On Baytrail, we manually calculate busyness over the evaluation interval
to avoid issues with miscaluations with RC6 enabled. However, it turns
out that the DOWN_EI interrupt generator is completely bust - it
operates in two modes, continuous or never. Neither of which are
conducive to good behaviour. Stop unmask the DOWN_EI interrupt and just
compute everything from the UP_EI which does seem to correspond to the
desired interval.
v2: Fixup gen6_rps_pm_mask() as well
v3: Inline vlv_c0_above() to combine the now identical elapsed
calculation for up/down and simplify the threshold testing
Fixes: 43cf3bf084ba ("drm/i915: Improved w/a for rps on Baytrail")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.1+
Link: http://patchwork.freedesktop.org/patch/msgid/20170309211232.28878-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170313170617.31564-1-chris@chris-wilson.co.uk
(cherry picked from commit e0e8c7cb6eb68e9256de2d8cbeb481d3701c05ac)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
This patch makes the I915_PARAM_HAS_EXEC_CONSTANTS getparam return 0
(indicating the optional feature is not supported), and makes execbuf
always return -EINVAL if the flags are used.
Apparently, no userspace ever shipped which used this optional feature:
I checked the git history of Mesa, xf86-video-intel, libva, and Beignet,
and there were zero commits showing a use of these flags. Kernel commit
72bfa19c8deb4 apparently introduced the feature prematurely. According
to Chris, the intention was to use this in cairo-drm, but "the use was
broken for gen6", so I don't think it ever happened.
'relative_constants_mode' has always been tracked per-device, but this
has actually been wrong ever since hardware contexts were introduced, as
the INSTPM register is saved (and automatically restored) as part of the
render ring context. The software per-device value could therefore get
out of sync with the hardware per-context value. This meant that using
them is actually unsafe: a client which tried to use them could damage
the state of other clients, causing the GPU to interpret their BO
offsets as absolute pointers, leading to bogus memory reads.
These flags were also never ported to execlist mode, making them no-ops
on Gen9+ (which requires execlists), and Gen8 in the default mode.
On Gen8+, userspace can write these registers directly, achieving the
same effect. On Gen6-7.5, it likely makes sense to extend the command
parser to support them. I don't think anyone wants this on Gen4-5.
Based on a patch by Dave Gordon.
v3: Return -ENODEV for the getparam, as this is what we do for other
obsolete features. Suggested by Chris Wilson.
Cc: stable@vger.kernel.org
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92448
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170215093446.21291-1-kenneth@whitecape.org
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170313170433.26843-1-chris@chris-wilson.co.uk
(cherry picked from commit ef0f411f51475f4eebf9fc1b19a85be698af19ff)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
In order to prevent accessing the hpd registers outside of the display
power wells, we should refrain from writing to the registers before the
display interrupts are enabled.
[ 4.740136] WARNING: CPU: 1 PID: 221 at drivers/gpu/drm/i915/intel_uncore.c:795 __unclaimed_reg_debug+0x44/0x50 [i915]
[ 4.740155] Unclaimed read from register 0x1e1110
[ 4.740168] Modules linked in: i915(+) intel_gtt drm_kms_helper prime_numbers
[ 4.740190] CPU: 1 PID: 221 Comm: systemd-udevd Not tainted 4.10.0-rc6+ #384
[ 4.740203] Hardware name: / , BIOS PYBSWCEL.86A.0027.2015.0507.1758 05/07/2015
[ 4.740220] Call Trace:
[ 4.740236] dump_stack+0x4d/0x6f
[ 4.740251] __warn+0xc1/0xe0
[ 4.740265] warn_slowpath_fmt+0x4a/0x50
[ 4.740281] ? insert_work+0x77/0xc0
[ 4.740355] ? fwtable_write32+0x90/0x130 [i915]
[ 4.740431] __unclaimed_reg_debug+0x44/0x50 [i915]
[ 4.740507] fwtable_read32+0xd8/0x130 [i915]
[ 4.740575] i915_hpd_irq_setup+0xa5/0x100 [i915]
[ 4.740649] intel_hpd_init+0x68/0x80 [i915]
[ 4.740716] i915_driver_load+0xe19/0x1380 [i915]
[ 4.740784] i915_pci_probe+0x32/0x90 [i915]
[ 4.740799] pci_device_probe+0x8b/0xf0
[ 4.740815] driver_probe_device+0x2b6/0x450
[ 4.740828] __driver_attach+0xda/0xe0
[ 4.740841] ? driver_probe_device+0x450/0x450
[ 4.740853] bus_for_each_dev+0x5b/0x90
[ 4.740865] driver_attach+0x19/0x20
[ 4.740878] bus_add_driver+0x166/0x260
[ 4.740892] driver_register+0x5b/0xd0
[ 4.740906] ? 0xffffffffa0166000
[ 4.740920] __pci_register_driver+0x47/0x50
[ 4.740985] i915_init+0x5c/0x5e [i915]
[ 4.740999] do_one_initcall+0x3e/0x160
[ 4.741015] ? __vunmap+0x7c/0xc0
[ 4.741029] ? kmem_cache_alloc+0xcf/0x120
[ 4.741045] do_init_module+0x55/0x1c4
[ 4.741060] load_module+0x1f3f/0x25b0
[ 4.741073] ? __symbol_put+0x40/0x40
[ 4.741086] ? kernel_read_file+0x100/0x190
[ 4.741100] SYSC_finit_module+0xbc/0xf0
[ 4.741112] SyS_finit_module+0x9/0x10
[ 4.741125] entry_SYSCALL_64_fastpath+0x17/0x98
[ 4.741135] RIP: 0033:0x7f8559a140f9
[ 4.741145] RSP: 002b:00007fff7509a3e8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
[ 4.741161] RAX: ffffffffffffffda RBX: 00007f855aba02d1 RCX: 00007f8559a140f9
[ 4.741172] RDX: 0000000000000000 RSI: 000055b6db0914f0 RDI: 0000000000000011
[ 4.741183] RBP: 0000000000020000 R08: 0000000000000000 R09: 000000000000000e
[ 4.741193] R10: 0000000000000011 R11: 0000000000000246 R12: 000055b6db0854d0
[ 4.741204] R13: 000055b6db091150 R14: 0000000000000000 R15: 000055b6db035924
v2: Set dev_priv->display_irqs_enabled to true for all platforms other
than vlv/chv that manually control the display power domain.
Fixes: 19625e85c6ec ("drm/i915: Enable polling when we don't have hpd")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97798
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Lyude <cpaul@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Hans de Goede <jwrdegoede@fedoraproject.org>
Cc: stable@vger.kernel.org
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170215131547.5064-1-chris@chris-wilson.co.uk
Link: http://patchwork.freedesktop.org/patch/msgid/20170313170231.18633-1-chris@chris-wilson.co.uk
(cherry picked from commit 262fd485ac6b476479f41f00bb104f6a1766ae66)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
When we restart the engines, and we have active requests, a request on
the first engine may complete and queue a request to the second engine
before we try to restart the second engine. That queueing of the
request may race with the engine to restart, and so may corrupt the
current state. Disabling the engine->irq_tasklet prevents the two paths
from writing into ELSP simultaneously (and modifyin the execlists_port[]
at the same time).
Include fixup 1d309634bcf4 ("drm/i915: Kill the tasklet then disable")
Fixes: 821ed7df6e2a ("drm/i915: Update reset path to fix incomplete requests")
Testcase: igt/gem_exec_fence/await-hang
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170208143033.11651-3-chris@chris-wilson.co.uk
Link: http://patchwork.freedesktop.org/patch/msgid/20170313165958.13970-2-chris@chris-wilson.co.uk
(cherry picked from commit 1f7b847d72c3583df5048d83bd945d0c2c524c28)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
This reverts commit bb10d4ec3be4b069bfb61c60ca4f708f58f440f1.
Since commit c8ebfad7a063 ("drm/i915: Ignore OpRegion panel type except
on select machines") we ignore the OpRegion panel type except for
specific machines (handled via a DMI match), so having SKL explicitly
excluded from using the OpRegion panel type is redundant. So let's
remove the SKL check.
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170308143334.21216-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
Currently we do a reset prepare/finish around the call to reset the GPU,
but it looks like we need a later stage after the hw has been
reinitialised to allow GEM to restart itself. Start by splitting the 2
GEM phases into 3:
prepare - before the reset, check if GEM recovered, then stop GEM
reset - after the reset, update GEM bookkeeping
finish - after the re-initialisation following the reset, restart GEM
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170208143033.11651-2-chris@chris-wilson.co.uk
Link: http://patchwork.freedesktop.org/patch/msgid/20170313165958.13970-1-chris@chris-wilson.co.uk
(cherry picked from commit d80270931314a88d79d9bd5e0a5df93c12196375)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
drivers/gpu/drm/tinydrm/mipi-dbi.c:657:2-3: Unneeded semicolon
drivers/gpu/drm/tinydrm/mipi-dbi.c:593:2-3: Unneeded semicolon
Remove unneeded semicolon.
Generated by: scripts/coccinelle/misc/semicolon.cocci
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170312144636.GA91808@lkp-g5.lkp.intel.com
|
|
The trouble we have is that we can't really test all the shrinker
recursion stuff exhaustively in BAT because any kind of thrashing
stress test just takes too long.
But that leaves a really big gap open, since shrinker recursions are
one of the most annoying bugs. Now lockdep already has support for
checking allocation deadlocks:
- Direct reclaim paths are marked up with
lockdep_set_current_reclaim_state() and
lockdep_clear_current_reclaim_state().
- Any allocation paths are marked with lockdep_trace_alloc().
If we simply mark up our debugfs with the reclaim annotations, any
code and locks taken in there will automatically complete the picture
with any allocation paths we already have, as long as we have a simple
testcase in BAT which throws out a few objects using this interface.
Not stress test or thrashing needed at all.
v2: Need to EXPORT_SYMBOL_GPL to make it compile as a module.
v3: Fixup rebase fail (spotted by Chris).
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170312205340.16202-1-daniel.vetter@ffwll.ch
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
|
|
The main thing are the DDI ports. If there's a VBT that says there are
no outputs, we should trust that, and not have semi-random
defaults. Unfortunately, the defaults have resulted in some Chromebooks
without VBT to rely on this behaviour, so we split out the defaults for
the missing VBT case.
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/95c26079ff640d43f53b944f17e9fc356b36daec.1489152288.git.jani.nikula@intel.com
|
Philipp Zabel
Lucas Stach
Arkadiusz Hiler
Ander Conselvan de Oliveira
Dave Airlie
Arnd Bergmann
Rex Zhu
Ville Syrjälä
Chris Wilson
Daniel Vetter
Jyri Sarha
Dan Carpenter
Gerd Hoffmann
Kenneth Graunke
kbuild test robot
Jani Nikula