aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/gpu
AgeCommit message (Collapse)AuthorFilesLines
2016-09-02drm/i915: sseu: Use sseu_dev_info in device infoImre Deak7-87/+88
Move all slice/subslice/eu related properties to the sseu_dev_info struct. No functional change. v2: - s/info/sseu/ based on the new struct name. (Ben) Reviewed-by: Robert Bragg <robert@sixbynine.org> (v1) Reviewed-by: Ben Widawsky <benjamin.widawsky@intel.com> (v1) Tested-by: Ben Widawsky <benjamin.widawsky@intel.com> (v1) Signed-off-by: Imre Deak <imre.deak@intel.com>
2016-09-02drm/i915: sseu: Move sseu_dev_status to i915_drv.hImre Deak2-42/+45
The data in this struct is provided both by getting the slice/subslice/eu features available on a given platform and the actual runtime state of these same features which depends on the HW's current power saving state. Atm members of this struct are duplicated in sseu_dev_status and intel_device_info. For clarity and code reuse we can share one struct for both of the above purposes. This patch only moves the struct to the header file, the next patch will convert users of intel_device_info to use this struct too. Instead of unsigned int u8 is used now, which is big enough and is used anyway in intel_device_info. No functional change. v2: - s/stat/sseu/ based on the new struct name (Ben) Reviewed-by: Robert Bragg <robert@sixbynine.org> (v1) Reviewed-by: Ben Widawsky <benjamin.widawsky@intel.com> (v1) Tested-by: Ben Widawsky <benjamin.widawsky@intel.com> (v1) Signed-off-by: Imre Deak <imre.deak@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1472659987-10417-2-git-send-email-imre.deak@intel.com
2016-09-02drm/radeon: wire up a pci shutdown callbackAlex Deucher2-1/+14
Normally on shutdown or reboot we don't care about necessarily making sure the hw is in a good state because the system is about to be powered down or reset. However, after a shutdown or reboot in a VM, it's best to tear down the hw properly otherwise there can be problems with the next VM use. Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-09-02drm/amdgpu: wire up a pci shutdown callbackAlex Deucher1-0/+14
Normally on shutdown or reboot we don't care about necessarily making sure the hw is in a good state because the system is about to be powered down or reset. However, after a shutdown or reboot in a VM, it's best to tear down the hw properly otherwise there can be problems with the next VM use. Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-09-02drm/radeon: handle runtime pm in drm pre/post closeAlex Deucher1-0/+4
Close was not handled correctly. Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-09-02drm/amdgpu: handle runtime pm in drm pre/post closeAlex Deucher1-0/+4
Close was not handled correctly. Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-09-02drm/radeon: handle runtime pm correctly in amdgpu_driver_open_kmsAlex Deucher1-6/+7
Need to fix the error paths. Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-09-02drm/amdgpu: handle runtime pm correctly in amdgpu_driver_open_kmsAlex Deucher1-8/+9
Need to fix the error paths. Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-09-02drm/radeon: skip suspend/resume on DRM_SWITCH_POWER_DYNAMIC_OFFAlex Deucher1-2/+4
Missed this case previously. No need to do anything if the device is already off. runtime pm will handle it. Acked-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-09-02drm/radeon: set runtime pm state to active on resumeAlex Deucher1-0/+8
The sbios always powers up the dGPU on resume. Acked-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-09-02drm/amdgpu: skip suspend/resume on DRM_SWITCH_POWER_DYNAMIC_OFFAlex Deucher1-2/+4
Missed this case previously. No need to do anything if the device is already off. runtime pm will handle it. Acked-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-09-02drm/amdgpu: set runtime pm state to active on resumeAlex Deucher1-0/+8
The sbios always powers up the dGPU on resume. Acked-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-09-02drm/amdgpu/gfx6: drop some dead codeAlex Deucher1-23/+0
The mqd is only used on CI and newer. Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-09-02drm/i915: Cleanup i915_param()David Weinehall1-55/+32
Rather than having a separate case for each value where we just return a hardcoded value = 1, we lump them all together and rely on the awesome case-fallthrough feature of C. Fix all feature macros to pass dev_priv instead of dev while at it, and use INTEL_GEN() instead of INTEL_INFO()->gen. Signed-off-by: David Weinehall <david.weinehall@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20160902104617.29089-1-david.weinehall@linux.intel.com Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2016-09-02drm/i915: Drop mutex around clearing error stateChris Wilson2-18/+2
The error state itself is guarded by a spinlock (admittedly even that is overkill for a single pointer!) and doesn't require us to take the struct_mutex in the debugfs/sysfs interface. Removing the struct_mutex removes one more potential blockage when trying to debug a deadlock. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/20160901205510.31307-1-chris@chris-wilson.co.uk Reviewed-by: David Weinehall <david.weinehall@linux.intel.com
2016-09-02drm/i915: Update DRIVER_DATE to 20160902Daniel Vetter1-1/+1
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-09-02Merge tag 'drm-vc4-fixes-2016-08-29' of https://github.com/anholt/linux into drm-fixesDave Airlie4-13/+24
This pull request brings in fixes for VC4 3D in 4.8, most of which are covered by testcases. * tag 'drm-vc4-fixes-2016-08-29' of https://github.com/anholt/linux: drm/vc4: Fix oops when userspace hands in a bad BO. drm/vc4: Fix overflow mem unreferencing when the binner runs dry. drm/vc4: Free hang state before destroying BO cache. drm/vc4: Fix handling of a pm_runtime_get_sync() success case. drm/vc4: Use drm_malloc_ab to fix large rendering jobs. drm/vc4: Use drm_free_large() on handles to match its allocation.
2016-09-02Merge tag 'tilcdc-4.9-fixes' of https://github.com/jsarha/linux into drm-nextDave Airlie9-30/+82
tilcdc fixes for v4.9 * tag 'tilcdc-4.9-fixes' of https://github.com/jsarha/linux: drm/tilcdc: Choose console BPP that supports RGB drm/tilcdc: Add blue-and-red-crossed devicetree property drm/tilcdc: Write DMA base and ceiling address with single instruction drm/tilcdc: Remove drm_helper_disable_unused_functions() call drm/tilcdc: Enable EOF interrupts for v1 LCDC drm/tilcdc: Adjust the FB_CEILING address drm/tilcdc: Fix check for remote port parent
2016-09-02Merge tag 'drm-vc4-next-2016-08-29' of https://github.com/anholt/linux into drm-nextDave Airlie4-19/+77
This pull request brings in interlaced vblank timing and a 3D rendering memory/CPU overhead reduction. * tag 'drm-vc4-next-2016-08-29' of https://github.com/anholt/linux: drm/vc4: Don't force new binner overflow allocation per draw. drm/vc4: Enable/Disable vblanks properly in crtc en/disable. drm/vc4: Enable precise vblank timestamping for interlaced modes. drm/vc4: Reject doublescan modes. drm/vc4: Fix handling of interlaced video modes. drm/vc4: Disallow interlaced modes on DPI.
2016-09-02Merge tag 'imx-drm-fixes-2016-08-30' of git://git.pengutronix.de/git/pza/linux into drm-fixesDave Airlie3-8/+43
imx-drm atomic modeset regression fixes - add active plane reconfiguration support - add back crtc vblank state reporting * tag 'imx-drm-fixes-2016-08-30' of git://git.pengutronix.de/git/pza/linux: drm/imx: fix crtc vblank state regression drm/imx: Add active plane reconfiguration support
2016-09-01drm/tilcdc: Choose console BPP that supports RGBJyri Sarha6-19/+9
Choose console BPP that supports RGB and remove the old fbdev bpp selection code. LCDC on AM335x has red and blue wires switched between 24 bit and 16 bit colors. If 24 format is wired for RGB colors, the 16 bit format is wired for BGR. drm_fbdev_cma_init() does not currently like anything else but RGB formats, so we must choose such bytes per pixel value that supports RGB. Signed-off-by: Jyri Sarha <jsarha@ti.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-09-01drm/tilcdc: Add blue-and-red-crossed devicetree propertyJyri Sarha3-6/+48
Add "blue-and-red-wiring"-device tree property and update devicetree binding document. The red and blue components are reversed between 24 and 16 bit modes on am335x LCDC output pins. To get 24 RGB format the red and blue wires has to be crossed and this in turn causes 16 colors output to be in BGR format. With straight wiring the 16 color is RGB and 24 bit is BGR. The new property describes whether the red and blue wires are crossed or not. If the property is not present or its value is not recognized the legacy mode is assumed. The legacy configuration supports RGB565, RGB888 and XRGB8888 formats. However, depending on wiring, the red and blue colors are swapped in either 16 or 24-bit color modes. For more details see section 3.1.1 in AM335x Silicon Errata: http://www.ti.com/general/docs/lit/getliterature.tsp?baseLiteratureNumber=sprz360 Signed-off-by: Jyri Sarha <jsarha@ti.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-09-01drm/tilcdc: Write DMA base and ceiling address with single instructionJyri Sarha2-2/+22
Write DMA base and ceiling address with a single instruction, if available. This should make it more unlikely that LCDC would fetch the DMA addresses in the middle of an update. Having bad combination of addresses in dma base and ceiling (e.g base > ceiling) can cause unpredictaple behavior in LCDC. Signed-off-by: Jyri Sarha <jsarha@ti.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-09-01drm/tilcdc: Remove drm_helper_disable_unused_functions() callJyri Sarha1-2/+0
drm_helper_disable_unused_functions() should not be called by atomic drivers. Signed-off-by: Jyri Sarha <jsarha@ti.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-09-01drm/tilcdc: Enable EOF interrupts for v1 LCDCKarl Beldan1-0/+2
This got accidentally dropped in the fixed commit and is required for the driver to properly work on the rev1 IP, such as found on the LCDK. Fixes: 2b2080d7e9ae ("drm/tilcdc: Get rid of complex ping-pong mechanism") Signed-off-by: Karl Beldan <kbeldan@baylibre.com> Signed-off-by: Jyri Sarha <jsarha@ti.com>
2016-09-01drm/tilcdc: Adjust the FB_CEILING addressKarl Beldan1-1/+1
The LCDC seems to expect its framebuffer ceiling address pointer to be an inclusive bound. The IP rev2 seems to cope with that but rev1 (as found on the LCDK) don't. Also note that this is what the framebuffer code does in da8xx-fb.c. Since, as the TRM puts it, "The 2 LSBs are hardwired to 00b", the dma_addr_t can be decremented without cast. I tested it with a v2 (AM335x, rev 0x4F201000) and an LCDK (v1). Signed-off-by: Karl Beldan <kbeldan@baylibre.com> Signed-off-by: Jyri Sarha <jsarha@ti.com>
2016-09-01drm/tilcdc: Fix check for remote port parentTeresa Remmet1-1/+1
In function tilcdc_get_external_components the check for the remote port parent is not correct. We need a '||' instead of an '&&'. Signed-off-by: Teresa Remmet <t.remmet@phytec.de> Signed-off-by: Jyri Sarha <jsarha@ti.com>
2016-09-01drm/sun4i: Clear encoder->bridge if a bridge is not foundChen-Yu Tsai1-4/+6
The KMS helpers (drm_atomic_helper_check_modeset/mode_fixup) pass encoder->bridge directly to drm_bridge_mode_fixup, which expects a valid pointer, or NULL (in which case it just returns). Clear encoder->bridge if a bridge is not found, instead of keeping the ERR_PTR value. Since other drm_bridge functions also follow this pattern of checking for a non-NULL pointer, we can drop the ifs around the calls and just pass the pointer directly. Fixes: 894f5a9f4b4a ("drm/sun4i: Add bridge support") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-09-01drm/i915: Use atomic for dev_priv->mm.bsd_engine_dispatch_indexJoonas Lahtinen3-8/+6
Use atomic type and operands for dev_priv->mm.bsd_engine_dispatch_index to avoid one struct_mutex locking scenario. Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Imre Deak <imre.deak@intel.com> Cc: Zhao Yakui <yakui.zhao@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1472731101-21982-1-git-send-email-joonas.lahtinen@linux.intel.com
2016-09-01Merge branch 'msm-fixes-4.8' of git://people.freedesktop.org/~robclark/linux into drm-fixesDave Airlie3-5/+40
copy from user fixes. * 'msm-fixes-4.8' of git://people.freedesktop.org/~robclark/linux: drm/msm: protect against faults from copy_from_user() in submit ioctl drm/msm: fix use of copy_from_user() while holding spinlock
2016-09-01Revert "drm: make DRI1 drivers depend on BROKEN"Dave Airlie1-1/+0
This reverts commit d10571fc4fba7d57fb8157f0be61dcbe4a7965ca. This isn't how we get to do this unfortunately. Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-09-01Merge tag 'topic/drm-misc-2016-08-31' of git://anongit.freedesktop.org/drm-intel into drm-nextDave Airlie29-1717/+1909
More -misc stuff - moar drm_crtc.c split up&documentation - some fixes for the simple kms helpers (Andrea) - I included all the dri1 patches from David - we're not removing any code or drivers, and it seems to have worked as a wake-up call to motivate a few more people to upstream kms conversions for these. Feel free to revert if you disagree strongly. - a few other single patches * tag 'topic/drm-misc-2016-08-31' of git://anongit.freedesktop.org/drm-intel: (24 commits) drm: drm_probe_helper: Fix output_poll_work scheduling drm: bridge/dw-hdmi: Fix colorspace and scan information registers values drm/doc: Polish docs for drm_property&drm_property_blob drm: Unify handling of blob and object properties drm: Extract drm_property.[hc] drm: move drm_mode_legacy_fb_format to drm_fourcc.c drm/doc: Polish docs for drm_mode_object drm: Remove drm_mode_object->atomic_count drm: Extract drm_mode_object.[hc] drm/doc: Polish kerneldoc for encoders drm: Extract drm_encoder.[hc] drm/fb-helper: don't call remove_conflicting_framebuffers for FB=m && DRM=y drm/atomic-helper: Add NO_DISABLE_AFTER_MODESET flag support for plane commit drm/atomic-helper: Disable appropriate planes in disable_planes_on_crtc() drm/atomic-helper: Add atomic_disable CRTC helper callback drm: simple_kms_helper: add support for bridges drm: simple_kms_helper: make connector optional at init time drm/bridge: introduce bridge detaching mechanism drm/simple-helpers: Always add planes to the state update drm: reduce GETCLIENT to a minimum ...
2016-08-31drm/amdgpu: add gart recovery by gtt list V2Chunming Zhou3-0/+31
V2: a. gart recovery should be ahead of ring test. b. rename to amdgpu_ttm_recover_gart Signed-off-by: Chunming Zhou <David1.Zhou@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-08-31drm/amdgpu: link all gtt when binding them V2Chunming Zhou3-0/+17
V2: spin lock instead of mutex for gtt list Signed-off-by: Chunming Zhou <David1.Zhou@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-08-31drm/amdgpu: add si pciids v2Ken Wang1-0/+74
Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Ken Wang <Qingqing.Wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-08-31drm/amdgpu/si: Add updated smc firmware for SI kickersAlex Deucher1-4/+44
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-08-31drm/amdgpu: Add SI Family informationKen Wang1-0/+1
Signed-off-by: Ken Wang <Qingqing.Wang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-08-31drm/amdgpu: enable SI DPMMaruthi Srinivas Bayyavarapu3-5/+15
Signed-off-by: Maruthi Bayyavarapu <maruthi.bayyavarapu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-08-31drm/amdgpu: use DRM print instead of printkHuang Rui1-8/+7
Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-08-31drm/amdgpu: add SI DPM support (v4)Maruthi Bayyavarapu5-0/+9135
v2: corrected register offset shift v3: rebase fixes v4: fix firmware paths add SI smc firmware versions for sysfs dump remove unused function forward define fix the tahiti specific value of DEEP_SLEEP_CLK_SEL field fix to miss adding thermal controller use vram_type instead of checking mem_gddr5 flag fix incorrect index of CG_FFCT_0 register fix incorrect reading method at si_get_current_pcie_speed Signed-off-by: Maruthi Bayyavarapu <maruthi.bayyavarapu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-08-31drm/amdgpu: add SI SMC supportMaruthi Srinivas Bayyavarapu2-0/+703
Signed-off-by: Maruthi Bayyavarapu <maruthi.bayyavarapu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-08-31drm/amdgpu: add si dpm support in amdgpu_atombiosMaruthi Srinivas Bayyavarapu3-1/+175
v2: renamed _atom_ to _atombios_ for consistency added ulClockParams to _COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V3 and _COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V5 to avoid build break Signed-off-by: Maruthi Bayyavarapu <maruthi.bayyavarapu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-08-31drm/amdgpu: add si specific logic into the device initialize function v3Ken Wang1-5/+17
v3: guard doorbell_fini as well Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Ken Wang <Qingqing.Wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-08-31drm/amdgpu: record error code when ring test failedChunming Zhou1-2/+3
Otherwise we may miss errors. Signed-off-by: Chunming Zhou <David1.Zhou@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2016-08-31drm/amd/amdgpu: compute ring test fail during S4 on CIjimqu1-3/+9
unhalt Instrction Fetch Unit after all rings are inited. Signed-off-by: JimQu <Jim.Qu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2016-08-31drm/amd/amdgpu: sdma resume fail during S4 on CIjimqu1-0/+3
SDMA could be fail in the thaw() and restore() processes, do software reset if each SDMA engine is busy. Signed-off-by: JimQu <Jim.Qu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2016-08-31drm/amdgpu: add si ip blocks setup v3Ken Wang1-0/+14
Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Ken Wang <Qingqing.Wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-08-31drm/amdgpu: add all the components for si into Makefile/kconfig v3Ken Wang2-0/+9
Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Ken Wang <Qingqing.Wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-08-31drm/amdgpu: introduce pcie port read/write entryHuang Rui3-52/+60
This patch adds pcie port read/write entry, because it will be also used on si dpm part. Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-08-31drm/amdgpu: add si implementation v10Ken Wang3-0/+2041
v5: rebase fixes v6: add mgcg arrays v7: rebase fixes v8: rebase fixes v9: add get_disabled_bios(), make get_xclk static v10: fix oland and hainan asic specific handle at si_program_aspm Signed-off-by: Ken Wang <Qingqing.Wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.