aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/gpu
AgeCommit message (Collapse)AuthorFilesLines
2016-04-28drm: sun4i: Add RGB outputMaxime Ripard6-1/+355
One of the A10 display pipeline possible output is an RGB interface to drive LCD panels directly. This is done through the first channel of the TCON that will output our video signals directly. Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-04-28drm: Add Allwinner A10 Display Engine supportMaxime Ripard18-1/+2202
The Allwinner A10 and subsequent SoCs share the same display pipeline, with variations in the number of controllers (1 or 2), or the presence or not of some output (HDMI, TV, VGA) or not. Add a driver with a limited set of features for now, and we will hopefully support all of them eventually Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-04-28drm/i915: Protect gen7 irq_seqno_barrier with uncore lockChris Wilson1-1/+7
Faced with sporadic machine hangs on gen7, that mimic the issue of concurrent writes to the same cacheline and seem to start with commit 9b9ed3093613 (drm/i915: Remove forcewake dance from seqno/irq barrier on legacy gen6+), let us restore the spinlock around the mmio read. Fixes: 9b9ed3093613 (drm/i915: Remove forcewake dance from seqno/irq...) Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1461744121-27051-1-git-send-email-chris@chris-wilson.co.uk Tested-by: Mika Kuoppala <mika.kuoppala@intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
2016-04-27drm/i915: Update RAWCLK_FREQ register on VLV/CHVVille Syrjälä5-2/+13
I just noticed that VLV/CHV have a RAWCLK_FREQ register just like PCH platforms. It lives in the display power well, so we should update it when enabling the power well. Interestingly the BIOS seems to leave it at the reset value (125) which doesn't match the rawclk frequency on VLV/CHV (200 MHz). As always with these register, the spec is extremely vague what the register does. All it says is: "This is used to generate a divided down clock for miscellaneous timers in display." Based on a quick test, at least AUX and PWM appear to be unaffected by this. But since the register is there, let's configure it in accordance with the spec. Note that we have to move intel_update_rawclk() to occur before we touch the power wells, so that the dev_priv->rawclk_freq is already populated when the disp2 enable hook gets called for the first time. I think this should be safe to do on other platforms as well. Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1461768202-17544-1-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2016-04-27drm/i915: Unify VLV/CHV DPOunit clock gating disable/enableVille Syrjälä1-6/+7
Check for VLV/CHV instead if !BXT when re-enabling DPOunit clock gating after DSI disable. That's what we checked when disabling the clock gating when enabling DSI. Also use the same temporary variable name in both cases, and toss in a bit of dev vs. dev_priv cleanup while at it. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1460996305-30453-1-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2016-04-27drm/amdgpu: disable vm interrupts with vm_fault_stop=2Flora Cui2-2/+8
V2: disable all vm interrupts in late_init() Signed-off-by: Flora Cui <Flora.Cui@amd.com> Reviewed-by: Ken Wang <Qingqing.Wang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-04-27drm/amdgpu: print a message if ATPX dGPU power control is missingAlex Deucher1-1/+4
It will help identify problematic boards. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-04-27Revert "drm/amdgpu: disable runtime pm on PX laptops without dGPU power control"Alex Deucher2-11/+5
This reverts commit bedf2a65c1aa8fb29ba8527fd00c0f68ec1f55f1. See the radeon revert for an extended description. Cc: stable@vger.kernel.org
2016-04-27drm/radeon: fix vertical bars appear on monitor (v2)Vitaly Prosyak2-1/+199
When crtc/timing is disabled on boot the dig block should be stopped in order ignore timing from crtc, reset the steering fifo otherwise we get display corruption or hung in dp sst mode. v2: agd: fix coding style Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-04-27drm/ttm: fix kref count mess in ttm_bo_move_to_lru_tailFlora Cui1-13/+4
Fixes the following scenario: 1. Page table bo allocated in vram and linked to man->lru. tbo->list_kref.refcount=2 2. Page table bo is swapped out and removed from man->lru. tbo->list_kref.refcount=1 3. Command submission from userspace. Page table bo is moved to vram. ttm_bo_move_to_lru_tail() link it to man->lru and don't increase the kref count. Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Flora Cui <Flora.Cui@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2016-04-27drm/i915: tidy up gen8_init_scratchMatthew Auld1-9/+16
Prefer a goto teardown path to do all the required cleanup. v2: (Joonas Lahtinen) - remove NULL assignments - rename goto labels Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Dave Gordon <david.s.gordon@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1461759565-12086-1-git-send-email-matthew.auld@intel.com
2016-04-27drm: Protect dev->filelist with its own mutexDaniel Vetter5-12/+24
amdgpu gained dev->struct_mutex usage, and that's because it's walking the dev->filelist list. Protect that list with it's own lock to take one more step towards getting rid of struct_mutex usage in drivers once and for all. While doing the conversion I noticed that 2 debugfs files in i915 completely lacked appropriate locking. Fix that up too. v2: don't forget to switch to drm_gem_object_unreference_unlocked. Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1461691808-12414-9-git-send-email-daniel.vetter@ffwll.ch
2016-04-27drm: Make drm_vm_open/close_locked private to drm_vm.cDaniel Vetter2-14/+4
It's only used for legacy mmaping support now. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1461691808-12414-8-git-send-email-daniel.vetter@ffwll.ch
2016-04-27drm: Hide master MAP cleanup in drm_bufs.cDaniel Vetter2-14/+23
And again make sure it's a no-op for modern drivers. Another case of dev->struct_mutex gone for modern drivers! Note that the entirety of the legacy addmap interface is now protected by DRIVER_MODESET. Note that just auditing kernel code is not enough, since userspace loves to set up legacy maps on it's own for various things - with ums userspace and kernel space share control over resources. v2: Also add a DRIVER_* check like for all other maps functions to really short-circuit the code. And give drm_legacy_rmmap used by the dev unregister code the same treatment. v3: - remove redundant return; (Alex, Chris) - don't special case nouveau with DRIVER_KMS_LEGACY_CONTEXT. v4: Again special case nouveau. The problem is not directly in the ddx, but that it calls dri1 functions from the X server. And those do call drmAddMap. Fixed only in commit b1a630b48210d6a3c44994fce1b73273000ace5c Author: Dave Airlie <airlied@redhat.com> Date: Wed Nov 7 14:45:14 2012 +1000 nouveau: drop DRI1 device open interface. Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1461741618-12679-1-git-send-email-daniel.vetter@ffwll.ch
2016-04-27drm: Forbid legacy MAP functions for DRIVER_MODESETDaniel Vetter1-0/+12
Like in commit 0e975980d435d58df2d430d688b8c18778b42218 Author: Peter Antoine <peter.antoine@intel.com> Date: Tue Jun 23 08:18:49 2015 +0100 drm: Turn off Legacy Context Functions we need to again make an exception for nouveau, but everyone else really doesn't need this. Dave Airlie dug out again why we need this: The problem is the legacy dri1 open function the nouveau ddx called, and the problematic code is actually in the X server itself. It was only fixed in commit b1a630b48210d6a3c44994fce1b73273000ace5c Author: Dave Airlie <airlied@redhat.com> Date: Wed Nov 7 14:45:14 2012 +1000 nouveau: drop DRI1 device open interface. Cc: Peter Antoine <peter.antoine@intel.com> Cc: Ben Skeggs <bskeggs@redhat.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1461691808-12414-5-git-send-email-daniel.vetter@ffwll.ch Link: http://patchwork.freedesktop.org/patch/msgid/1461691808-12414-6-git-send-email-daniel.vetter@ffwll.ch
2016-04-27drm/i915: Make RPS EI/thresholds multiple of 25 on SNB-BDWVille Syrjälä1-1/+8
Somehow my SNB GT1 (Dell XPS 8300) gets very unhappy around GPU hangs if the RPS EI/thresholds aren't suitably aligned. It seems like scheduling/timer interupts stop working somehow and things get stuck eg. in usleep_range(). I bisected the problem down to commit 8a5864377b12 ("drm/i915/skl: Restructured the gen6_set_rps_thresholds function") I observed that before all the values were at least multiples of 25, but afterwards they are not. And rounding things up to the next multiple of 25 does seem to help, so lets' do that. I also tried roundup(..., 5) but that wasn't sufficient. Also I have no idea if we might need this sort of thing on gen9+ as well. These are the original EI/thresholds: LOW_POWER GEN6_RP_UP_EI 12500 GEN6_RP_UP_THRESHOLD 11800 GEN6_RP_DOWN_EI 25000 GEN6_RP_DOWN_THRESHOLD 21250 BETWEEN GEN6_RP_UP_EI 10250 GEN6_RP_UP_THRESHOLD 9225 GEN6_RP_DOWN_EI 25000 GEN6_RP_DOWN_THRESHOLD 18750 HIGH_POWER GEN6_RP_UP_EI 8000 GEN6_RP_UP_THRESHOLD 6800 GEN6_RP_DOWN_EI 25000 GEN6_RP_DOWN_THRESHOLD 15000 These are after 8a5864377b12: LOW_POWER GEN6_RP_UP_EI 12500 GEN6_RP_UP_THRESHOLD 11875 GEN6_RP_DOWN_EI 25000 GEN6_RP_DOWN_THRESHOLD 21250 BETWEEN GEN6_RP_UP_EI 10156 GEN6_RP_UP_THRESHOLD 9140 GEN6_RP_DOWN_EI 25000 GEN6_RP_DOWN_THRESHOLD 18750 HIGH_POWER GEN6_RP_UP_EI 7812 GEN6_RP_UP_THRESHOLD 6640 GEN6_RP_DOWN_EI 25000 GEN6_RP_DOWN_THRESHOLD 15000 And these are what we have after this patch: LOW_POWER GEN6_RP_UP_EI 12500 GEN6_RP_UP_THRESHOLD 11875 GEN6_RP_DOWN_EI 25000 GEN6_RP_DOWN_THRESHOLD 21250 BETWEEN GEN6_RP_UP_EI 10175 GEN6_RP_UP_THRESHOLD 9150 GEN6_RP_DOWN_EI 25000 GEN6_RP_DOWN_THRESHOLD 18750 HIGH_POWER GEN6_RP_UP_EI 7825 GEN6_RP_UP_THRESHOLD 6650 GEN6_RP_DOWN_EI 25000 GEN6_RP_DOWN_THRESHOLD 15000 Cc: stable@vger.kernel.org Cc: Akash Goel <akash.goel@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Testcase: igt/kms_pipe_crc_basic/hang-read-crc-pipe-B Fixes: 8a5864377b12 ("drm/i915/skl: Restructured the gen6_set_rps_thresholds function") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1461159836-9108-1-git-send-email-ville.syrjala@linux.intel.com Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Patrik Jakobsson <patrik.jakobsson@linux.intel.com> (cherry picked from commit 8a292d016d1cc4938ff14b4df25328230b08a408) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-04-27drm/i915: Fake HDMI live statusShashank Sharma1-2/+10
This patch does the following: - Fakes live status of HDMI as connected (even if that's not). While testing certain (monitor + cable) combinations with various intel platforms, it seems that live status register doesn't work reliably on some older devices. So limit the live_status check for HDMI detection, only for platforms from gen7 onwards. V2: restrict faking live_status to certain platforms V3: (Ville) - keep the debug message for !live_status case - fix indentation of comment - remove "warning" from the debug message (Jani) - Change format of fix details in the commit message Fixes: 237ed86c693d ("drm/i915: Check live status before reading edid") Cc: stable@vger.kernel.org # v4.4 Suggested-by: Ville Syrjala <ville.syrjala@linux.intel.com> Signed-off-by: Shashank Sharma <shashank.sharma@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1461237606-16491-1-git-send-email-shashank.sharma@intel.com Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> (cherry picked from commit 4f4a8185011773f7520d9916c6857db946e7f9d1) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-04-27drm/i915: Fix eDP low vswing for BroadwellMika Kahola1-2/+10
It was noticed on bug #94087 that module parameter i915.edp_vswing=2 that should override the VBT setting to use default voltage swing (400 mV) was not applied for Broadwell. This patch provides a fix for this by checking if default i.e. higher voltage swing is requested to be used and applies the DDI translations table for DP instead of eDP (low vswing) table. v2: Combine two if statements into one (Jani) v3: Change dev_priv->edp_low_vswing to use dev_priv->vbt.edp.low_vswing Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94087 Signed-off-by: Mika Kahola <mika.kahola@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1461155942-7749-1-git-send-email-mika.kahola@intel.com Cc: stable@vger.kernel.org Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> (cherry picked from commit 00983519214b61c1b9371ec2ed55a4dde773e384) [Jani: s/dev_priv->vbt.edp.low_vswing/dev_priv->edp_low_vswing/ to backport] Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-04-27drm/i915/ddi: Fix eDP VDD handling during booting and suspend/resumeImre Deak3-9/+7
The driver's VDD on/off logic assumes that whenever the VDD is on we also hold an AUX power domain reference. Since BIOS can leave the VDD on during booting and resuming and on DDI platforms we won't take a corresponding power reference, the above assumption won't hold on those platforms and an eventual delayed VDD off work will do an extraneous AUX power domain put resulting in a refcount underflow. Fix this the same way we did this for non-DDI DP encoders: commit 6d93c0c41760c0 ("drm/i915: fix VDD state tracking after system resume") At the same time call the DP encoder suspend handler the same way as the non-DDI DP encoders do to flush any pending VDD off work. Leaving the work running may cause a HW access where we don't expect this (at a point where power domains are suspended already). While at it remove an unnecessary function call indirection. This fixed for me AUX refcount underflow problems on BXT during suspend/resume. CC: Ville Syrjälä <ville.syrjala@linux.intel.com> CC: stable@vger.kernel.org Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1460963062-13211-4-git-send-email-imre.deak@intel.com (cherry picked from commit bf93ba67e9c05882f05b7ca2d773cfc8bf462c2a) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-04-27drm/i915: Fix system resume if PCI device remained enabledImre Deak1-1/+31
During system resume we depended on pci_enable_device() also putting the device into PCI D0 state. This won't work if the PCI device was already enabled but still in D3 state. This is because pci_enable_device() is refcounted and will not change the HW state if called with a non-zero refcount. Leaving the device in D3 will make all subsequent device accesses fail. This didn't cause a problem most of the time, since we resumed with an enable refcount of 0. But it fails at least after module reload because after that we also happen to leak a PCI device enable reference: During probing we call drm_get_pci_dev() which will enable the PCI device, but during device removal drm_put_dev() won't disable it. This is a bug of its own in DRM core, but without much harm as it only leaves the PCI device enabled. Fixing it is also a bit more involved, due to DRM mid-layering and because it affects non-i915 drivers too. The fix in this patch is valid regardless of the problem in DRM core. v2: - Add a code comment about the relation of this fix to the freeze/thaw vs. the suspend/resume phases. (Ville) - Add a code comment about the inconsistent ordering of set power state and device enable calls. (Chris) CC: Ville Syrjälä <ville.syrjala@linux.intel.com> CC: Chris Wilson <chris@chris-wilson.co.uk> CC: stable@vger.kernel.org Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1460979954-14503-1-git-send-email-imre.deak@intel.com (cherry picked from commit 44410cd0bfb26bde9288da34c190cc9267d42a20) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-04-27drm/i915: Avoid stalling on pending flips for legacy cursor updatesChris Wilson1-0/+3
The legacy cursor ioctl expects to be asynchronous with respect to other screen updates, in particular page flips. As X updates the cursor from a signal context, if the cursor blocks then it will stall both the input and output chains causing bad stuttering and horrible UX. Reported-and-tested-by: Rafael Ristovski <rafael.ristovski@gmail.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94980 Fixes: 5008e874edd34 ("drm/i915: Make wait_for_flips interruptible.") Suggested-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Jani Nikula <jani.nikula@intel.com> Cc: stable@vger.kernel.org Link: http://patchwork.freedesktop.org/patch/msgid/1460922166-20292-1-git-send-email-chris@chris-wilson.co.uk Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> (cherry picked from commit acf4e84d6167317ff21be5c03e1ea76ea5783701) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-04-27drm/i915/dsi: add support for gpio elements on CHVJani Nikula1-0/+70
Add support for CHV gpio programming in DSI gpio elements. v2: Overhaul macros according to Ville's review. v3: Address Ville's review: - swap E and SE gpio ranges - add a note about max SE index - use GPO, not HIZ - swap cfg0 and cfg1 v4: fix port for dsi sequence versions 1 and 2 [Rewritten by Jani, based on earlier work by Yogesh and Deepak.] Signed-off-by: Yogesh Mohan Marimuthu <yogesh.mohan.marimuthu@intel.com> Signed-off-by: Deepak M <m.deepak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/bdaaf9915a5005305b31bb26cf619a5a82472f2a.1461666263.git.jani.nikula@intel.com
2016-04-27drm/i915/dsi: add support for sequence block v3 gpio for VLVJani Nikula1-2/+2
Only support North Core (NC) GPIOs for now, and assume the vlv gpio table only has NC GPIOs for now. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/d51c9479e8ef0b201452086870e7785928a86289.1461666263.git.jani.nikula@intel.com
2016-04-27drm: Push struct_mutex into ->master_destroyDaniel Vetter1-1/+1
Only two drivers implement this hook. vmwgfx (which doesn't need it really) and legacy radeon (which since v1 has been nuked, yay). v1: Rebase over radeon ums removal. Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Alex Deucher <alexdeucher@gmail.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1461691808-12414-6-git-send-email-daniel.vetter@ffwll.ch
2016-04-27drm: Move drm_getmap into drm_bufs.c and give it a legacy prefixDaniel Vetter3-53/+55
It belongs right next to the addmap and rmmap functions really. And for OCD consistency name it drm_legacy_getmap_ioctl. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1461691808-12414-4-git-send-email-daniel.vetter@ffwll.ch
2016-04-27drm: Put legacy lastclose work into drm_legacy_dev_reinitDaniel Vetter2-24/+20
Except for the ->lasclose driver callback evrything in drm_lastclose() is all legacy cruft and can be hidden. Which means another dev->struct_mutex site disappears entirely for modern drivers! Also while at it change the return value of drm_lastclose to void since it will always succeed. No one checks the return value of close() anyway, ever. v2: Move misplaced hunk, spotted by 0day. Cc: Thierry Reding <thierry.reding@gmail.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1461691808-12414-3-git-send-email-daniel.vetter@ffwll.ch
2016-04-27drm: Give drm_agp_clear drm_legacy_ prefixDaniel Vetter3-4/+4
It has a DRIVER_MODESET check to sure make it's not creating havoc for drm drivers. Make that clear in the name too. v2: Move misplaced hunk, spotted by 0day and Thierry. Cc: Thierry Reding <thierry.reding@gmail.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1461691808-12414-2-git-send-email-daniel.vetter@ffwll.ch
2016-04-27drm: Switch blobs to the new generic modeset obj refcountingDaniel Vetter1-119/+45
Need to move the free function around a bit, but otherwise mostly just removing code. Specifically we can nuke all the _locked variants since the weak idr reference is now protected by the idr_mutex, which we never hold anywhere expect in the lookup/reg/unreg functions. And those never call anything else. Another benefit of this is that this patch switches the weak reference logic from kref_put_mutex to kref_get_unless_zero. And the later is in general more flexible wrt accomodating multiple weak references protected by different locks, which might or might not come handy eventually. But one consequence of that switch is that we need to acquire the blob_lock from the free function for the list_del calls. That's a bit tricky to pull off, but works well if we pick the exact same scheme as is already used for framebuffers. Most important changes: - filp list is maintainer by create/destroy_blob ioctls directly (already the case, so we can just remove the redundant list_del from the free function). - filp close handler walks the filp-private list lockless - works because we know no one else can access it. I copied the same comment from the fb code over to explain this. - Otherwise we need to sufficiently restrict blob_lock critical sections to avoid all the unreference calls. Easy to do once the blob_lock only protects the list, and no longer the weak reference. Cc: Dave Airlie <airlied@gmail.com> Cc: Daniel Stone <daniels@collabora.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-04-27drm/atomic-helpers: Don't duplicate code in destroy helpersDaniel Vetter1-8/+9
Random drive-by refactoring I spotted. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-04-27drm: Fix fb leaks and WARN spew in get/set_prop ioctlsDaniel Vetter1-7/+9
Dave Airlie had at least the refcount leak fixed in a later patch (but that patch does other things which need a bit more work). But we still have the trouble that silly userspace could hit the WARN_ON in drm_mode_object_find. Fix this all up to make sure we don't leak objects, and don't spew into demsg. Fixes: d0f37cf62979 ("drm/mode: move framebuffer reference into object.") Testcase: igt/kms_addfb_basic/invalid-*-prop* Cc: Dave Airlie <airlied@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-04-27drm: Improve kerneldoc for new mode object refcountingDaniel Vetter1-7/+15
Slipped through the cracks in my review. The one issue I spotted is that drm_mode_object_find now acquires references and can be used on FB objects, which caused follow-on bugs in get/set_prop ioctls. Follow-up patches will fix that. [airlied: fixup some incr fb/decr object mixups] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-04-27Merge branch 'topic-arcpgu-v6' of https://github.com/foss-for-synopsys-dwc-arc-processors/linux into drm-nextDave Airlie9-0/+845
This is DRM driver for ARC PGU - simple bitstreamer used on Synopsys ARC SDP boards (both AXS101 and AXS103). * 'topic-arcpgu-v6' of https://github.com/foss-for-synopsys-dwc-arc-processors/linux: arc: axs10x - add support of ARC PGU MAINTAINERS: Add maintainer for ARC PGU display controller drm: Add DT bindings documentation for ARC PGU display controller drm: Add support of ARC PGU display controller
2016-04-27drm/virtio: send vblank event after crtc updatesGustavo Padovan1-0/+12
virtio_gpu was failing to send vblank events when using the atomic IOCTL with the DRM_MODE_PAGE_FLIP_EVENT flag set. This patch fixes each and enables atomic pageflips updates. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-04-27drm/dp/mst: Restore primary hub guid on resumeLyude1-0/+12
Some hubs are forgetful, and end up forgetting whatever GUID we set previously after we do a suspend/resume cycle. This can lead to hotplugging breaking (along with probably other things) since the hub will start sending connection notifications with the wrong GUID. As such, we need to check on resume whether or not the GUID the hub is giving us is valid. Signed-off-by: Lyude <cpaul@redhat.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1460580618-7421-1-git-send-email-cpaul@redhat.com Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-04-27drm/dp/mst: Get validated port ref in drm_dp_update_payload_part1()cpaul@redhat.com1-0/+8
We can thank KASAN for finding this, otherwise I probably would have spent hours on it. This fixes a somewhat harder to trigger kernel panic, occuring while enabling MST where the port we were currently updating the payload on would have all of it's refs dropped before we finished what we were doing: ================================================================== BUG: KASAN: use-after-free in drm_dp_update_payload_part1+0xb3f/0xdb0 [drm_kms_helper] at addr ffff8800d29de018 Read of size 4 by task Xorg/973 ============================================================================= BUG kmalloc-2048 (Tainted: G B W ): kasan: bad access detected ----------------------------------------------------------------------------- INFO: Allocated in drm_dp_add_port+0x1aa/0x1ed0 [drm_kms_helper] age=16477 cpu=0 pid=2175 ___slab_alloc+0x472/0x490 __slab_alloc+0x20/0x40 kmem_cache_alloc_trace+0x151/0x190 drm_dp_add_port+0x1aa/0x1ed0 [drm_kms_helper] drm_dp_send_link_address+0x526/0x960 [drm_kms_helper] drm_dp_check_and_send_link_address+0x1ac/0x210 [drm_kms_helper] drm_dp_mst_link_probe_work+0x77/0xd0 [drm_kms_helper] process_one_work+0x562/0x1350 worker_thread+0xd9/0x1390 kthread+0x1c5/0x260 ret_from_fork+0x22/0x40 INFO: Freed in drm_dp_free_mst_port+0x50/0x60 [drm_kms_helper] age=7521 cpu=0 pid=2175 __slab_free+0x17f/0x2d0 kfree+0x169/0x180 drm_dp_free_mst_port+0x50/0x60 [drm_kms_helper] drm_dp_destroy_connector_work+0x2b8/0x490 [drm_kms_helper] process_one_work+0x562/0x1350 worker_thread+0xd9/0x1390 kthread+0x1c5/0x260 ret_from_fork+0x22/0x40 which on this T460s, would eventually lead to kernel panics in somewhat random places later in intel_mst_enable_dp() if we got lucky enough. Signed-off-by: Lyude <cpaul@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-04-27Merge branch 'drm-etnaviv-fixes' of git://git.pengutronix.de:/git/lst/linux into drm-fixesDave Airlie1-13/+18
just a single fix to not move the GPU linear window on cores where it might lead to inconsistent views of the memory by different engines in the core, thus breaking relocs and possibly causing other fun. * 'drm-etnaviv-fixes' of git://git.pengutronix.de:/git/lst/linux: drm/etnaviv: don't move linear memory window on 3D cores without MC2.0
2016-04-26drm: Add support of ARC PGU display controllerCarlos Palminha9-0/+845
ARC PGU could be found on some development boards from Synopsys. This is a simple byte streamer that reads data from a framebuffer and sends data to the single encoder. Signed-off-by: Carlos Palminha <palminha@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: David Airlie <airlied@linux.ie> Cc: dri-devel@lists.freedesktop.org Cc: linux-snps-arc@lists.infradead.org
2016-04-26drm/i915: Parsing the PWM cntrl and CABC ON/OFF fields in VBTDeepak M2-1/+17
For dual link panel scenarios there are new fields added in the VBT which indicate on which port the PWM cntrl and CABC ON/OFF commands needs to be sent. v2: Moving the comment to intel_dsi.h(Jani) v3: Renaming the field names (Jani) v4 by Jani: make this patch only about VBT Cc: Jani Nikula <jani.nikula@intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Yetunde Adebisi <yetundex.adebisi@intel.com> Signed-off-by: Deepak M <m.deepak@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1459346623-30752-2-git-send-email-jani.nikula@intel.com
2016-04-26drm/i915: Add Backlight Control using DPCD for eDP connectors (v9)Yetunde Adebisi6-0/+185
This patch adds support for eDP backlight control using DPCD registers to backlight hooks in intel_panel. It checks for backlight control over AUX channel capability and sets up function pointers to get and set the backlight brightness level if supported. v2: Moved backlight functions from intel_dp.c into a new file intel_dp_aux_backlight.c. Also moved reading of eDP display control registers to intel_dp_get_dpcd v3: Correct some formatting mistakes v4: Updated to use AUX backlight control if PWM control is not possible (Jani) v5: Moved call to initialize backlight registers to dp_aux_setup_backlight v6: Check DP_EDP_BACKLIGHT_PIN_ENABLE_CAP is disabled before setting up AUX backlight control. To fix BLM_PWM_ENABLE igt test warnings on bdw_ultra v7: Add enable_dpcd_backlight module parameter. v8: Rebase onto latest drm-intel-nightly branch v9: Remove changes to intel_dp_dpcd_read_wake Split addition edp_dpcd variable into a separate patch Cc: Bob Paauwe <bob.j.paauwe@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Yetunde Adebisi <yetundex.adebisi@intel.com> [Jani: whitepace changes to appease checkpatch] Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1459865452-9138-4-git-send-email-yetundex.adebisi@intel.com
2016-04-26drm/i915: Read eDP Display control capability registersYetunde Adebisi2-5/+11
Add new edp_dpcd variable to intel_dp. Read and save eDP Display control capability registers to edp_dpcd. Signed-off-by: Yetunde Adebisi <yetundex.adebisi@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1459865452-9138-3-git-send-email-yetundex.adebisi@intel.com
2016-04-26drm/sysfs: Annote lockless show functions with READ_ONCEDaniel Vetter1-3/+8
For documentation and paranoia. Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1459331120-27864-4-git-send-email-daniel.vetter@ffwll.ch
2016-04-26drm/i915/dsi: don't pretend we support SC GPIOsJani Nikula1-1/+2
False ideas introduced in commit 1d96a4a8ace6c1b08c7d203d9533b14e59f2200b Author: Jani Nikula <jani.nikula@intel.com> Date: Fri Mar 18 13:11:10 2016 +0200 drm/i915/dsi: add support for DSI sequence block v2 gpio element Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/5264e2f796c4bdc4128cff5a5e245da3038bf1b3.1460039033.git.jani.nikula@intel.com
2016-04-25drm/fsl-dcu: increment version and dateStefan Agner1-2/+2
The driver supports now a second platform and received several fixes, hence a version increment is justified. Signed-off-by: Stefan Agner <stefan@agner.ch>
2016-04-25drm/fsl-dcu: implement lastclose callbackStefan Agner1-0/+8
Use CMA helper drm_fbdev_cma_restore_mode to restore fbdev mode in process which uses drm/kms dies. Signed-off-by: Stefan Agner <stefan@agner.ch>
2016-04-25drm/fsl-dcu: disable output polling on driver unloadStefan Agner1-0/+4
Disabling output polling before unloading the driver. Signed-off-by: Stefan Agner <stefan@agner.ch>
2016-04-25drm/fsl-dcu: deallocate fbdev CMA on unloadStefan Agner1-0/+9
Free fbdev CMA using drm_fbdev_cma_fini on unload. This fixes a warning when unloading the driver: WARNING: CPU: 0 PID: 164 at drivers/gpu/drm/drm_crtc.c:5930 drm_mode_config_cleanup+0x204/0x208 Signed-off-by: Stefan Agner <stefan@agner.ch>
2016-04-25drm/fsl-dcu: use variable name dev for struct drm_deviceStefan Agner1-16/+13
The driver uses different variable names for struct drm_device across functions which is confusing. Stick to the more common variable name dev. While at it, remove unnecessary if statement in error handling. Signed-off-by: Stefan Agner <stefan@agner.ch>
2016-04-25drm/fsl-dcu: handle missing panel gracefullyStefan Agner1-7/+13
If the device tree property fsl,panel is missing, drm_panel_attach is called with a NULL pointer as first argument. Having a panel is basically mandatory since RGB is the only supported connector. Check if a panel node has been found, return -ENODEV and cleanup otherwise. Signed-off-by: Stefan Agner <stefan@agner.ch>
2016-04-25drm/fsl-dcu: detach panel on destroyStefan Agner1-0/+3
Disable the earlier attached panel on connector destroy. Signed-off-by: Stefan Agner <stefan@agner.ch>
2016-04-25drm/layerscape: reduce excessive stack usageArnd Bergmann1-2/+2
The fsl-dcu driver copies a drm_mode_config object to its stack but then only accesses a single member (dpms_property) once. The data structure is large enough to trigger a warning about the amount of kernel stack being used: drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_rgb.c: In function 'fsl_dcu_drm_connector_create': drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_rgb.c:182:1: error: the frame size of 1040 bytes is larger than 1024 bytes [-Werror=frame-larger-than=] This changes the fsl_dcu_drm_connector_create() function to only access the drm_mode_config by reference, which is also more efficient. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 109eee2f2a18 ("drm/layerscape: Add Freescale DCU DRM driver") Signed-off-by: Stefan Agner <stefan@agner.ch>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.