aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/gpu
AgeCommit message (Collapse)AuthorFilesLines
2016-02-26drm/sti: set DRIVER_ATOMIC for stibenjamin.gaignard@linaro.org1-1/+1
sti now support of atomic modesetting so set the flag to enable it. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Reviewed-by: Vincent Abriou <vincent.abriou@st.com>
2016-02-26drm/sti: fix cursor coordinatesbenjamin.gaignard@linaro.org1-1/+1
fix x/y typo while setting cursor coordinates Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com> Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Reviewed-by: Vincent Abriou <vincent.abriou@st.com>
2016-02-26drm/sti: set CRTC modesetting parametersbenjamin.gaignard@linaro.org1-0/+1
Set CRTC modesetting parameters to avoid warnings in atomic mode. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Reviewed-by: Vincent Abriou <vincent.abriou@st.com>
2016-02-26drm/sti: fix potential crash in gdpbenjamin.gaignard@linaro.org1-6/+7
In some cases last_close() could be called before sti_gdp_disable() and make kernel crash because mixer structure has been destroy. Let's gdp keep a reference on vtg to fix that (like it is already done in HQVDP) Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Reviewed-by: Vincent Abriou <vincent.abriou@st.com>
2016-02-26drm/amdgpu: fix error handling in amdgpu_bo_list_setChristian König1-0/+3
Don't leak BOs in case of some error. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2016-02-26drm/amd/powerplay: fix code style warning.Rex Zhu1-2/+2
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2016-02-25drm/fsl-dcu: fix register initializationStefan Agner1-2/+2
The layer enumeration start with 0 (0-15 for LS1021a and 0-63 for Vybrid) whereas the register enumeration start from 1 (1-10 for LS1021a and 1-9 for Vybrid). The loop started off from 0 for both iterations and initialized the number of layers inclusive, which is one layer too many. All extensively written registers seem to be unassigned, it seems that the write to those registers did not do any harm in practice. Signed-off-by: Stefan Agner <stefan@agner.ch>
2016-02-25drm/fsl-dcu: use mode flags for hsync/vsync polarityStefan Agner2-3/+9
The current default configuration is as follows: - Invert VSYNC signal (active LOW) - Invert HSYNC signal (active LOW) The mode flags allow to specify the required polarity per mode. Furthermore, none of the current driver settings is actually a standard polarity. This patch applies the current driver default polarities as explicit flags to the display which has been introduced with the driver (NEC WQVGA "nec,nl4827hc19-05b"). The driver now also parses the flags field and applies the configuration accordingly, by using the following values as standard polarities: (e.g. when no flags are specified): - VSYNC signal not inverted (active HIGH) - HSYNC signal not inverted (active HIGH) Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Stefan Agner <stefan@agner.ch>
2016-02-25drm/fsl-dcu: fix alpha blendingStefan Agner2-12/+23
Fix alpha blending by enabling alpha blending for the whole frame if a color mode with alpha channel is selected (DRM_FORMAT_ARGB*). Also support color modes without alpha channel (DRM_FORMAT_XRGB*) by just not enabling alpha blending on layer level. Signed-off-by: Stefan Agner <stefan@agner.ch>
2016-02-25drm/fsl-dcu: mask all interrupts on initializationStefan Agner1-4/+1
The state of the interrupt mask register on initialization is unknown, e.g. U-Boot could already used the DCU. So depending on the boot loader, the outcome of the interrupt mask register could be different. A defined state is much more preferable. Also, there is no value in keeping interrupts enabled which we don't need. Therefor, mask all interrupts on initialization. Signed-off-by: Stefan Agner <stefan@agner.ch>
2016-02-25drm/fsl-dcu: handle initialization errors properlyStefan Agner1-4/+20
If initialization fails (e.g. due to missing panel node or deferred probe) make sure to roll-back all operations and return the error code. Signed-off-by: Stefan Agner <stefan@agner.ch>
2016-02-25drm/fsl-dcu: avoid memory leak on errorsStefan Agner2-1/+7
Improve error handling during CRTC initialization. Especially avoid memory leaks in the primary plane initialization error path. Signed-off-by: Stefan Agner <stefan@agner.ch>
2016-02-25drm/fsl-dcu: remove regmap return value checksStefan Agner3-188/+99
It is not common to do regmap return value checks, especially not for memory mapped device. We can rule out most error returns since the conditions are static and we know they are ok (e.g. offset aligned to register stride). Also without proper error handling they are not really valuable for the user. Hence remove most of them. The check in the interrupt handler is worth keeping since a volatile register won't be readable in case register caching is still enabled. Signed-off-by: Stefan Agner <stefan@agner.ch>
2016-02-25drm/fsl-dcu: specify volatile registersStefan Agner1-1/+11
Since we are using cached registers, we need to specify volatile registers explicitly to avoid reading their value from the cache. This allows to read the correct interrupt status in fsl_dcu_drm_irq and clear the asserted bits only. Signed-off-by: Stefan Agner <stefan@agner.ch>
2016-02-25drm: fsl-dcu: Fix no fb check bugMeng Yi1-0/+3
For state->fb or state->crtc may be NULL in fsl_dcu_drm_plane_atomic_check function, if so, return 0. Signed-off-by: Meng Yi <meng.yi@nxp.com> Signed-off-by: Jianwei Wang <jianwei.wang.chn@gmail.com> Signed-off-by: Stefan Agner <stefan@agner.ch>
2016-02-25drm/amd: Do not make DRM_AMD_ACP default to yGeert Uytterhoeven1-1/+0
By default, not only this driver is enabled on all platforms, but also generic PM Domains and Multi-Function Devices. Drop the "default y" to fix this. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-02-25drm/amdgpu/gfx: fix off by one in rb rework (v2)Alex Deucher2-10/+4
When I reworked this code, I messed up num rb count. v2: use hweight32 Reviewed-by: Ken Wang <Qingquing.Wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-02-25drm/i915: Remove update_sprite_watermarks.Maarten Lankhorst2-5/+0
Commit 791a32be6eb2 ("drm/i915: Drop intel_update_sprite_watermarks") removes the use of this variable, but forgot to remove it. Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1455108583-29227-5-git-send-email-maarten.lankhorst@linux.intel.com
2016-02-25drm/tilcdc: Use devm_kzalloc() and devm_kcalloc() for private dataJyri Sarha4-46/+21
Use devm_kzalloc() and devm_kcalloc() for private data allocation at driver load time. Signed-off-by: Jyri Sarha <jsarha@ti.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-02-25drm/tilcdc: Initialize crtc->portJyri Sarha1-0/+20
Initialize port device node pointer in the tilcdc crtc. Fixes "Falling back to first CRTC" warning from tda998x driver. The tda998x encoder driver calls drm_of_find_possible_crtcs() to initialize possible_crtcs of struct drm_encoder. The crtc->port needs to be initialized for drm_of_find_possible_crtcs() to work. Signed-off-by: Jyri Sarha <jsarha@ti.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-02-25drm/tilcdc: Disable sync lost interrupt if it fires on every frameJyri Sarha1-1/+20
Disable the sync lost interrupt if it fires on every frame for 50 consecutive frames in a row. This is relatively sure sign of the sync lost interrupt being stuck and firing on every frame even if the display otherwise appears to work OK. Signed-off-by: Jyri Sarha <jsarha@ti.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-02-25drm/tilcdc: Add prints on sync lost and FIFO underrun interruptsJyri Sarha2-2/+10
Add ratelimited prints on sync lost and FIFO underrun interrupts. Signed-off-by: Jyri Sarha <jsarha@ti.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-02-25drm/tilcdc: Remove the duplicate LCDC_INT_ENABLE_SET_REG in registers[]Jyri Sarha1-2/+1
Removes the duplicate LCDC_INT_ENABLE_SET_REG-entry in registers array. Signed-off-by: Jyri Sarha <jsarha@ti.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-02-25drm/tilcdc: Fix interrupt enable/disable code for version 2 tilcdcJyri Sarha1-5/+6
Fix interrupt enable/disable code for version 2 tilcdc. In version 2 tilcdc there is a separate register for disabling interrupts. Writing 0 to enable registers bits does not have any effect. The interrupt clear register works the same way, writing 1 to specific bit disables the interrupt and writing 0 does not have any effect. The "bug" that is fixed here does not really do any harm since the interrupts are enabled only once in the power up and disabled before power down. Signed-off-by: Jyri Sarha <jsarha@ti.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-02-25drm/tilcdc: Do not update the next frame buffer close to vertical blankTomi Valkeinen1-8/+53
Do not update the next frame buffer close to vertical blank. This is to avoid situation when the frame changes between writing of LCDC_DMA_FB_BASE_ADDR_0_REG and LCDC_DMA_FB_CEILING_ADDR_0_REG. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> [Added description to the patch] Signed-off-by: Jyri Sarha <jsarha@ti.com>
2016-02-25drm/tilcdc: Get rid of complex ping-pong mechanismTomi Valkeinen2-95/+53
Get rid of complex ping-pong mechanism and replace it with simpler single buffer flipping code. The LCDC HW appears to be designed mainly static framebuffers in mind. There are two modes of operation, either static single buffer, or ping pong double buffering with two static buffers switching back and forth. Luckily the framebuffer start address is fetched only in the beginning of the frame and changing the address after that only takes effect after the next vertical blank. The page flipping code can simply write the address of the new framebuffer and the page is flipped automatically after the next vertical blank. Using the ping pong double buffering makes the flipping code way more complex and it does not provide any benefit, so it is better to switch to single buffer operation. There is still one problem in updating the framebuffer dma address on the fly. There are two registers defining the framebuffer dma area and things may break if the dma address is fetched in while the registers are are being updated. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> [Added description to the patch] Signed-off-by: Jyri Sarha <jsarha@ti.com>
2016-02-25drm/tilcdc: cleanup irq handlingTomi Valkeinen1-4/+5
Cleanup irq handling. Clear the irq status unconditionally and restructure the status bit conditions. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> [Added description to the patch] Signed-off-by: Jyri Sarha <jsarha@ti.com>
2016-02-25drm/tilcdc: remove broken error handlingTomi Valkeinen1-6/+1
Remove broken error handling. The condition for handling the LCDC_SYNC_LOST and LCDC_FIFO_UNDERFLOW could never be satisfied as the LCDC_SYNC_LOST interrupt is not enabled. Also the requirement to have both LCDC_SYNC_LOST and LCDC_FIFO_UNDERFLOW fired at once before handling the error looks weird. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> [Added description to the patch] Signed-off-by: Jyri Sarha <jsarha@ti.com>
2016-02-25drm/tilcdc: split reset to a separate functionTomi Valkeinen1-7/+14
Split reset to a separate function and use usleep_range(250, 1000) instead of msleep(1) to to keep the reset bit on long enough. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> [Added description to the patch, changed mdelay(500) to usleep_range(250, 1000)] Signed-off-by: Jyri Sarha <jsarha@ti.com>
2016-02-25drm/tilcdc: disable crtc on unloadTomi Valkeinen1-0/+2
Disable crtc on unload. Call tilcdc_crtc_dpms() with DRM_MODE_DPMS_OFF in the beginning of unload function. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> [Added description to the patch] Signed-off-by: Jyri Sarha <jsarha@ti.com>
2016-02-25drm/tilcdc: cleanup runtime PM handlingTomi Valkeinen2-9/+11
Cleanup runtime PM handling. Before the patch the usage of pm_runtime calls was inconsistent and hard to follow. After the update the pm_runtime calls are removed from set_scanout() and called around major operations that access the HW. After the patch the DPMS code does not have pm_runtime_forbid/allow calls any more and pm_runtime_irq_safe() is not set anymore. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> [Added description to the patch] Signed-off-by: Jyri Sarha <jsarha@ti.com>
2016-02-25drm/tilcdc: Allocate register storage based on the actual number registersJyri Sarha2-2/+21
Allocate suspend/resume register storage based on the actual number registers the driver is aware of. The static allocation for register storage had fallen behind badly. Reported-by: Michael Bode <michael@bumbleB.de> Signed-off-by: Jyri Sarha <jsarha@ti.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-02-25drm/tilcdc: fix build error when !CONFIG_CPU_FREQGrygorii Strashko1-1/+1
Fix build error when !CONFIG_CPU_FREQ drivers/gpu/drm/tilcdc/tilcdc_drv.c: In function 'tilcdc_load': drivers/gpu/drm/tilcdc/tilcdc_drv.c:327:1: error: label 'fail_put_clk' defined but not used [-Werror=unused-label] fail_put_clk: ^ Signed-off-by: Grygorii Strashko <Grygorii.Strashko@linaro.org> Signed-off-by: Jyri Sarha <jsarha@ti.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-02-25drm/tilcdc: Implement dma-buf support for tilcdcJyri Sarha1-1/+12
There is nothing special about tilcdc HW when the video memory is concerned. Just using the standard drm helpers for implementation is enough. Signed-off-by: Jyri Sarha <jsarha@ti.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-02-25drm/tilcdc: disable the lcd controller/dma engine when suspend invokedDarren Etheridge3-2/+5
The LCD controller must be deactivated and all DMA transactions stopped when the suspend power state is entered otherwise the PRCM causes the L3 bus to get stuck in transition state. This commit forces the lcdc to be shut down and waits for all pending DMA transactions to complete as part of the suspend handler for this driver. Signed-off-by: Darren Etheridge <detheridge@ti.com> Tested-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Jyri Sarha <jsarha@ti.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-02-25drm/tilcdc: make frame_done interrupt active at all timesDarren Etheridge1-2/+4
The frame_done interrupt was only being enabled when the vsync interrupts were being enabled by DRM. However the frame_done is used to determine if the LCD controller has successfully completed the raster_enable, raster_disable commands and the vsync interrupts are not always enabled during these operations. Signed-off-by: Darren Etheridge <detheridge@ti.com> Tested-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Jyri Sarha <jsarha@ti.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-02-25drm/tilcdc: fix kernel panic on suspend when no hdmi monitor connectedDarren Etheridge2-6/+18
On BeagleBone Black if no HDMI monitor is connected and suspend is requested a kernel panic will result: root@am335x-evm:~# echo mem > /sys/power/state [ 65.548710] PM: Syncing filesystems ... done. [ 65.631311] Freezing user space processes ... (elapsed 0.006 seconds) done. [ 65.648619] Freezing remaining freezable tasks ... (elapsed 0.005 seconds) done. [ 65.833500] Unhandled fault: external abort on non-linefetch (0x1028) at 0xfa30e004 [ 65.841692] Internal error: : 1028 [#1] SMP ARM <snip> [ 66.105287] [<c03765f0>] (platform_pm_suspend) from [<c037b6d4>] (dpm_run_callback+0x34/0x70) [ 66.114370] [<c037b6d4>] (dpm_run_callback) from [<c037ba84>] (__device_suspend+0x10c/0x2f4) [ 66.123357] [<c037ba84>] (__device_suspend) from [<c037d004>] (dpm_suspend+0x58/0x218) [ 66.131796] [<c037d004>] (dpm_suspend) from [<c008d948>] (suspend_devices_and_enter+0x9c/0x3c0) [ 66.141055] [<c008d948>] (suspend_devices_and_enter) from [<c008de7c>] (pm_suspend+0x210/0x24c) [ 66.150312] [<c008de7c>] (pm_suspend) from [<c008cabc>] (state_store+0x68/0xb8) [ 66.158103] [<c008cabc>] (state_store) from [<c02e9654>] (kobj_attr_store+0x14/0x20) [ 66.166355] [<c02e9654>] (kobj_attr_store) from [<c0185c70>] (sysfs_kf_write+0x4c/0x50) [ 66.174883] [<c0185c70>] (sysfs_kf_write) from [<c018926c>] (kernfs_fop_write+0xb4/0x150) [ 66.183598] [<c018926c>] (kernfs_fop_write) from [<c0122638>] (vfs_write+0xa8/0x180) [ 66.191846] [<c0122638>] (vfs_write) from [<c01229f8>] (SyS_write+0x40/0x8c) [ 66.199365] [<c01229f8>] (SyS_write) from [<c000e580>] (ret_fast_syscall+0x0/0x48) [ 66.207426] Code: e595c210 e5932000 e59cc000 e08c2002 (e592c000) This is because the lcdc module is not enabled when no monitor is detected to save power. However the suspend handler just blindly tries to save the lcdc state by copying out the pertinent registers. However module is off so no good things happen when you try and access it. This patch only saves off the registers if the module is enabled, and then only restores the registers on resume if they were saved off during suspend. Signed-off-by: Darren Etheridge <detheridge@ti.com> Tested-by: Dave Gerlach <d-gerlach@ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Jyri Sarha <jsarha@ti.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-02-25drm/tilcdc: adopt pinctrl supportDave Gerlach1-0/+8
Update tilcdc driver to set the state of the pins to: - "default on resume - "sleep" on suspend By optionally putting the pins into sleep state in the suspend callback we can accomplish two things. - minimize current leakage from pins and thus save power, - prevent the IP from driving pins output in an uncontrolled manner, which may happen if the power domain drops the domain regulator. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Darren Etheridge <detheridge@ti.com> Signed-off-by: Jyri Sarha <jsarha@ti.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-02-25drm/tilcdc: verify fb pitchTomi Valkeinen1-0/+31
LCDC hardware does not support fb pitch that is different (i.e. larger) than the screen size. The driver currently does no checks for this, and the results of too big pitch are are flickering and lower fps. This issue easily happens when using libdrm's modetest tool with non-32 bpp modes. As modetest always allocated 4 bytes per pixel, it implies a bigger pitch for 16 or 24 bpp modes. This patch adds a check to reject pitches the hardware cannot support. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Darren Etheridge <detheridge@ti.com> Signed-off-by: Jyri Sarha <jsarha@ti.com>
2016-02-25drm/tilcdc: rewrite pixel clock calculationDarren Etheridge3-19/+9
Updating the tilcdc DRM driver code to calculate the LCD controller pixel clock more accurately. Based on a suggested implementation by Tomi Valkeinen. The current code does not work correctly and produces wrong results with many requested clock rates. It also oddly uses two different clocks, a display pll clock and a divider clock (child of display pll), instead of just using the clock coming to the lcdc. This patch removes the use of the display pll clock, and rewrites the code to calculate the clock rates. The idea is simply to request a clock rate of pixelclock*2, as the LCD controller has an internal divider which we set to 2. Signed-off-by: Darren Etheridge <detheridge@ti.com> [Rewrapped description] Signed-off-by: Jyri Sarha <jsarha@ti.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-02-25drm/i915: Kill off intel_crtc->atomic.wait_vblank, v6.Maarten Lankhorst3-25/+90
Currently we perform our own wait in post_plane_update, but the atomic core performs another one in wait_for_vblanks. This means that 2 vblanks are done when a fb is changed, which is a bit overkill. Merge them by creating a helper function that takes a crtc mask for the planes to wait on. The broadwell vblank workaround may look gone entirely but this is not the case. pipe_config->wm_changed is set to true when any plane is turned on, which forces a vblank wait. Changes since v1: - Removing the double vblank wait on broadwell moved to its own commit. Changes since v2: - Move out POWER_DOMAIN_MODESET handling to its own commit. Changes since v3: - Do not wait for vblank on legacy cursor updates. (Ville) - Move broadwell vblank workaround comment to page_flip_finished. (Ville) Changes since v4: - Compile fix, legacy_cursor_flip -> *_update. Changes since v5: - Kill brackets. - Add WARN_ON when wait_for_vblanks fails. - Remove extra newlines. - Split the checks whether vblank is needed to a separate function, with comments why a vblank is needed. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/56CD84DA.5030507@linux.intel.com Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
2016-02-25drm/i915: Unify power domain handling.Maarten Lankhorst1-45/+24
Right now there's separate power domain handling for update_pipe and modesets. Unify this and only grab POWER_DOMAIN_MODESET once. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1455108583-29227-3-git-send-email-maarten.lankhorst@linux.intel.com Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
2016-02-25drm/i915: Pass crtc state to modeset_get_crtc_power_domains.Maarten Lankhorst1-12/+21
Use our newly created encoder_mask to iterate over the encoders. This makes it possible to get the crtc power domains from the crtc_state at any time, without any locks or having to look at the legacy state. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1455108583-29227-2-git-send-email-maarten.lankhorst@linux.intel.com Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
2016-02-25drm/nouveau/disp/dp: ensure sink is powered up before attempting link trainingBen Skeggs2-0/+16
This can happen under some annoying circumstances, and is a quick fix until more substantial changes can be made. Fixed eDP mode changes on (at least) the Lenovo P50. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Cc: stable@vger.kernel.org
2016-02-25drm/nouveau: platform: Fix deferred probeThierry Reding2-12/+30
The error cleanup paths aren't quite correct and will crash upon deferred probe. Cc: stable@vger.kernel.org # v4.3+ Reviewed-by: Ben Skeggs <bskeggs@redhat.com> Reviewed-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-02-25Merge tag 'drm-intel-fixes-2016-02-22' of git://anongit.freedesktop.org/drm-intel into drm-fixesDave Airlie13-93/+367
This is a bit large, but it really helps Skylake bugs we are seeing on a number of laptops. Most of the commits are quite similar, ensuring the display power doesn't vanish under us during hardware access. Also do note that it's not just Skylake that's affected. * tag 'drm-intel-fixes-2016-02-22' of git://anongit.freedesktop.org/drm-intel: drm/i915/gen9: Verify and enforce dc6 state writes drm/i915/gen9: Check for DC state mismatch drm/i915/skl: Ensure HW is powered during DDB HW state readout drm/i915/lvds: Ensure the HW is powered during HW state readout drm/i915/hdmi: Ensure the HW is powered during HW state readout drm/i915/dsi: Ensure the HW is powered during HW state readout drm/i915/dp: Ensure the HW is powered during HW state readout drm/i915: Ensure the HW is powered when accessing the CRC HW block drm/i915/ddi: Ensure the HW is powered during HW state readout drm/i915/crt: Ensure the HW is powered during HW state readout drm/i915: Ensure the HW is powered during HW access in assert_pipe drm/i915: Ensure the HW is powered when disabling VGA drm/i915/ibx: Ensure the HW is powered during PLL HW readout drm/i915: Ensure the HW is powered during display pipe HW readout drm/i915: Add helper to get a display power ref if it was already enabled
2016-02-24drm/amdgpu: disable direct VM updates when vm_debug is setChristian König1-1/+2
That should make user space bugs more obvious. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2016-02-24amdgpu: fix NULL pointer dereference at tonga_check_states_equalBradley Pankow1-2/+2
The event_data passed from pem_fini was not cleared upon initialization. This caused NULL checks to pass and cast_const_phw_tonga_power_state to attempt to dereference an invalid pointer. Clear the event_data in pem_init and pem_fini before calling pem_handle_event. Reviewed-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Bradley Pankow <btpankow@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-02-23drm: rcar-du: Add tri-planar memory formats supportLaurent Pinchart2-10/+52
Those formats are supported on Gen3 only. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2016-02-23drm: rcar-du: Add probe deferral debug messagesLaurent Pinchart1-1/+8
Print a message when the HDMI I2C slave encoder can't be found to help debugging probe deferral issues. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.