| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Fix the gup benchmark flags to use the symbolic FOLL_WRITE, instead of a
hard-coded "1" value.
Also, clean up the filtering of gup flags a little, by just doing it
once before issuing any of the get_user_pages*() calls. This makes it
harder to overlook, instead of having little "gup_flags & 1" phrases in
the function calls.
Link: http://lkml.kernel.org/r/20200107224558.2362728-22-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Björn Töpel <bjorn.topel@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Leon Romanovsky <leonro@mellanox.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
1. Convert from get_user_pages() to pin_user_pages().
2. As required by pin_user_pages(), release these pages via
put_user_page().
Link: http://lkml.kernel.org/r/20200107224558.2362728-21-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Björn Töpel <bjorn.topel@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Leon Romanovsky <leonro@mellanox.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
1. Change vfio from get_user_pages_remote(), to
pin_user_pages_remote().
2. Because all FOLL_PIN-acquired pages must be released via
put_user_page(), also convert the put_page() call over to
put_user_pages_dirty_lock().
Note that this effectively changes the code's behavior in
vfio_iommu_type1.c: put_pfn(): it now ultimately calls
set_page_dirty_lock(), instead of set_page_dirty(). This is probably
more accurate.
As Christoph Hellwig put it, "set_page_dirty() is only safe if we are
dealing with a file backed page where we have reference on the inode it
hangs off." [1]
[1] https://lore.kernel.org/r/20190723153640.GB720@lst.de
Link: http://lkml.kernel.org/r/20200107224558.2362728-20-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Björn Töpel <bjorn.topel@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Leon Romanovsky <leonro@mellanox.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
1. Change v4l2 from get_user_pages() to pin_user_pages().
2. Because all FOLL_PIN-acquired pages must be released via
put_user_page(), also convert the put_page() call over to
put_user_pages_dirty_lock().
Link: http://lkml.kernel.org/r/20200107224558.2362728-19-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Björn Töpel <bjorn.topel@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Leon Romanovsky <leonro@mellanox.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Convert net/xdp to use the new pin_longterm_pages() call, which sets
FOLL_PIN. Setting FOLL_PIN is now required for code that requires
tracking of pinned pages.
In partial anticipation of this work, the net/xdp code was already calling
put_user_page() instead of put_page(). Therefore, in order to convert
from the get_user_pages()/put_page() model, to the
pin_user_pages()/put_user_page() model, the only change required here is
to change get_user_pages() to pin_user_pages().
Link: http://lkml.kernel.org/r/20200107224558.2362728-18-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Leon Romanovsky <leonro@mellanox.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Convert fs/io_uring to use the new pin_user_pages() call, which sets
FOLL_PIN. Setting FOLL_PIN is now required for code that requires
tracking of pinned pages, and therefore for any code that calls
put_user_page().
In partial anticipation of this work, the io_uring code was already
calling put_user_page() instead of put_page(). Therefore, in order to
convert from the get_user_pages()/put_page() model, to the
pin_user_pages()/put_user_page() model, the only change required here is
to change get_user_pages() to pin_user_pages().
Link: http://lkml.kernel.org/r/20200107224558.2362728-17-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Björn Töpel <bjorn.topel@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Leon Romanovsky <leonro@mellanox.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Convert drm/via to use the new pin_user_pages_fast() call, which sets
FOLL_PIN. Setting FOLL_PIN is now required for code that requires
tracking of pinned pages, and therefore for any code that calls
put_user_page().
In partial anticipation of this work, the drm/via driver was already
calling put_user_page() instead of put_page(). Therefore, in order to
convert from the get_user_pages()/put_page() model, to the
pin_user_pages()/put_user_page() model, the only change required is to
change get_user_pages() to pin_user_pages().
Link: http://lkml.kernel.org/r/20200107224558.2362728-16-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Jérôme Glisse <jglisse@redhat.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Björn Töpel <bjorn.topel@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Leon Romanovsky <leonro@mellanox.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Convert process_vm_access to use the new pin_user_pages_remote() call,
which sets FOLL_PIN. Setting FOLL_PIN is now required for code that
requires tracking of pinned pages.
Also, release the pages via put_user_page*().
Also, rename "pages" to "pinned_pages", as this makes for easier reading
of process_vm_rw_single_vec().
Link: http://lkml.kernel.org/r/20200107224558.2362728-15-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jérôme Glisse <jglisse@redhat.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Björn Töpel <bjorn.topel@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Leon Romanovsky <leonro@mellanox.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Convert infiniband to use the new pin_user_pages*() calls.
Also, revert earlier changes to Infiniband ODP that had it using
put_user_page(). ODP is "Case 3" in
Documentation/core-api/pin_user_pages.rst, which is to say, normal
get_user_pages() and put_page() is the API to use there.
The new pin_user_pages*() calls replace corresponding get_user_pages*()
calls, and set the FOLL_PIN flag. The FOLL_PIN flag requires that the
caller must return the pages via put_user_page*() calls, but infiniband
was already doing that as part of an earlier commit.
Link: http://lkml.kernel.org/r/20200107224558.2362728-14-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Björn Töpel <bjorn.topel@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Leon Romanovsky <leonro@mellanox.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
1. Call the new global pin_user_pages_fast(), from
pin_goldfish_pages().
2. As required by pin_user_pages(), release these pages via
put_user_page(). In this case, do so via put_user_pages_dirty_lock().
That has the side effect of calling set_page_dirty_lock(), instead of
set_page_dirty(). This is probably more accurate.
As Christoph Hellwig put it, "set_page_dirty() is only safe if we are
dealing with a file backed page where we have reference on the inode it
hangs off." [1]
Another side effect is that the release code is simplified because the
page[] loop is now in gup.c instead of here, so just delete the local
release_user_pages() entirely, and call put_user_pages_dirty_lock()
directly, instead.
[1] https://lore.kernel.org/r/20190723153640.GB720@lst.de
Link: http://lkml.kernel.org/r/20200107224558.2362728-13-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Björn Töpel <bjorn.topel@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Leon Romanovsky <leonro@mellanox.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Introduce pin_user_pages*() variations of get_user_pages*() calls, and
also pin_longterm_pages*() variations.
For now, these are placeholder calls, until the various call sites are
converted to use the correct get_user_pages*() or pin_user_pages*() API.
These variants will eventually all set FOLL_PIN, which is also
introduced, and thoroughly documented.
pin_user_pages()
pin_user_pages_remote()
pin_user_pages_fast()
All pages that are pinned via the above calls, must be unpinned via
put_user_page().
The underlying rules are:
* FOLL_PIN is a gup-internal flag, so the call sites should not directly
set it. That behavior is enforced with assertions.
* Call sites that want to indicate that they are going to do DirectIO
("DIO") or something with similar characteristics, should call a
get_user_pages()-like wrapper call that sets FOLL_PIN. These wrappers
will:
* Start with "pin_user_pages" instead of "get_user_pages". That
makes it easy to find and audit the call sites.
* Set FOLL_PIN
* For pages that are received via FOLL_PIN, those pages must be returned
via put_user_page().
Thanks to Jan Kara and Vlastimil Babka for explaining the 4 cases in
this documentation. (I've reworded it and expanded upon it.)
Link: http://lkml.kernel.org/r/20200107224558.2362728-12-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> [Documentation]
Reviewed-by: Jérôme Glisse <jglisse@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Björn Töpel <bjorn.topel@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Leon Romanovsky <leonro@mellanox.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
After DMA is complete, and the device and CPU caches are synchronized,
it's still required to mark the CPU pages as dirty, if the data was
coming from the device. However, this driver was just issuing a bare
put_page() call, without any set_page_dirty*() call.
Fix the problem, by calling set_page_dirty_lock() if the CPU pages were
potentially receiving data from the device.
Link: http://lkml.kernel.org/r/20200107224558.2362728-11-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: <stable@vger.kernel.org>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Björn Töpel <bjorn.topel@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Leon Romanovsky <leonro@mellanox.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
And get rid of the mmap_sem calls, as part of that. Note that
get_user_pages_fast() will, if necessary, fall back to
__gup_longterm_unlocked(), which takes the mmap_sem as needed.
Link: http://lkml.kernel.org/r/20200107224558.2362728-10-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Björn Töpel <bjorn.topel@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit 817be129e6f2 ("mm: validate get_user_pages_fast flags") allowed
only FOLL_WRITE and FOLL_LONGTERM to be passed to get_user_pages_fast().
This, combined with the fact that get_user_pages_fast() falls back to
"slow gup", which *does* accept FOLL_FORCE, leads to an odd situation:
if you need FOLL_FORCE, you cannot call get_user_pages_fast().
There does not appear to be any reason for filtering out FOLL_FORCE.
There is nothing in the _fast() implementation that requires that we
avoid writing to the pages. So it appears to have been an oversight.
Fix by allowing FOLL_FORCE to be set for get_user_pages_fast().
Link: http://lkml.kernel.org/r/20200107224558.2362728-9-jhubbard@nvidia.com
Fixes: 817be129e6f2 ("mm: validate get_user_pages_fast flags")
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Björn Töpel <bjorn.topel@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Update VFIO to take advantage of the recently loosened restriction on
FOLL_LONGTERM with get_user_pages_remote(). Also, now it is possible to
fix a bug: the VFIO caller is logically a FOLL_LONGTERM user, but it
wasn't setting FOLL_LONGTERM.
Also, remove an unnessary pair of calls that were releasing and
reacquiring the mmap_sem. There is no need to avoid holding mmap_sem
just in order to call page_to_pfn().
Also, now that the the DAX check ("if a VMA is DAX, don't allow long
term pinning") is in the internals of get_user_pages_remote() and
__gup_longterm_locked(), there's no need for it at the VFIO call site. So
remove it.
Link: http://lkml.kernel.org/r/20200107224558.2362728-8-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Suggested-by: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Björn Töpel <bjorn.topel@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Leon Romanovsky <leonro@mellanox.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
As it says in the updated comment in gup.c: current FOLL_LONGTERM
behavior is incompatible with FAULT_FLAG_ALLOW_RETRY because of the FS
DAX check requirement on vmas.
However, the corresponding restriction in get_user_pages_remote() was
slightly stricter than is actually required: it forbade all
FOLL_LONGTERM callers, but we can actually allow FOLL_LONGTERM callers
that do not set the "locked" arg.
Update the code and comments to loosen the restriction, allowing
FOLL_LONGTERM in some cases.
Also, copy the DAX check ("if a VMA is DAX, don't allow long term
pinning") from the VFIO call site, all the way into the internals of
get_user_pages_remote() and __gup_longterm_locked(). That is:
get_user_pages_remote() calls __gup_longterm_locked(), which in turn
calls check_dax_vmas(). This check will then be removed from the VFIO
call site in a subsequent patch.
Thanks to Jason Gunthorpe for pointing out a clean way to fix this, and
to Dan Williams for helping clarify the DAX refactoring.
Link: http://lkml.kernel.org/r/20200107224558.2362728-7-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Suggested-by: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Björn Töpel <bjorn.topel@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Leon Romanovsky <leonro@mellanox.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Avoid naming conflicts: rename local static function from
"pin_user_pages()" to "goldfish_pin_pages()".
An upcoming patch will introduce a global pin_user_pages() function.
Link: http://lkml.kernel.org/r/20200107224558.2362728-6-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jérôme Glisse <jglisse@redhat.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Björn Töpel <bjorn.topel@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Leon Romanovsky <leonro@mellanox.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
An upcoming patch changes and complicates the refcounting and especially
the "put page" aspects of it. In order to keep everything clean,
refactor the devmap page release routines:
* Rename put_devmap_managed_page() to page_is_devmap_managed(), and
limit the functionality to "read only": return a bool, with no side
effects.
* Add a new routine, put_devmap_managed_page(), to handle decrementing
the refcount for ZONE_DEVICE pages.
* Change callers (just release_pages() and put_page()) to check
page_is_devmap_managed() before calling the new
put_devmap_managed_page() routine. This is a performance point:
put_page() is a hot path, so we need to avoid non- inline function calls
where possible.
* Rename __put_devmap_managed_page() to free_devmap_managed_page(), and
limit the functionality to unconditionally freeing a devmap page.
This is originally based on a separate patch by Ira Weiny, which applied
to an early version of the put_user_page() experiments. Since then,
Jérôme Glisse suggested the refactoring described above.
Link: http://lkml.kernel.org/r/20200107224558.2362728-5-jhubbard@nvidia.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Suggested-by: Jérôme Glisse <jglisse@redhat.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Björn Töpel <bjorn.topel@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Leon Romanovsky <leonro@mellanox.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
After the removal of the device-public infrastructure there are only 2
->page_free() call backs in the kernel. One of those is a
device-private callback in the nouveau driver, the other is a generic
wakeup needed in the DAX case. In the hopes that all ->page_free()
callbacks can be migrated to common core kernel functionality, move the
device-private specific actions in __put_devmap_managed_page() under the
is_device_private_page() conditional, including the ->page_free()
callback. For the other page types just open-code the generic wakeup.
Yes, the wakeup is only needed in the MEMORY_DEVICE_FSDAX case, but it
does no harm in the MEMORY_DEVICE_DEVDAX and MEMORY_DEVICE_PCI_P2PDMA
case.
Link: http://lkml.kernel.org/r/20200107224558.2362728-4-jhubbard@nvidia.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jérôme Glisse <jglisse@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Björn Töpel <bjorn.topel@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Leon Romanovsky <leonro@mellanox.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
An upcoming patch uses try_get_compound_head() more widely, so move it to
the top of gup.c.
Also fix a tiny spelling error and a checkpatch.pl warning.
Link: http://lkml.kernel.org/r/20200107224558.2362728-3-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Björn Töpel <bjorn.topel@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Leon Romanovsky <leonro@mellanox.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "mm/gup: prereqs to track dma-pinned pages: FOLL_PIN", v12.
Overview:
This is a prerequisite to solving the problem of proper interactions
between file-backed pages, and [R]DMA activities, as discussed in [1],
[2], [3], and in a remarkable number of email threads since about
2017. :)
A new internal gup flag, FOLL_PIN is introduced, and thoroughly
documented in the last patch's Documentation/vm/pin_user_pages.rst.
I believe that this will provide a good starting point for doing the
layout lease work that Ira Weiny has been working on. That's because
these new wrapper functions provide a clean, constrained, systematically
named set of functionality that, again, is required in order to even
know if a page is "dma-pinned".
In contrast to earlier approaches, the page tracking can be
incrementally applied to the kernel call sites that, until now, have
been simply calling get_user_pages() ("gup"). In other words, opt-in by
changing from this:
get_user_pages() (sets FOLL_GET)
put_page()
to this:
pin_user_pages() (sets FOLL_PIN)
unpin_user_page()
Testing:
* I've done some overall kernel testing (LTP, and a few other goodies),
and some directed testing to exercise some of the changes. And as you
can see, gup_benchmark is enhanced to exercise this. Basically, I've
been able to runtime test the core get_user_pages() and
pin_user_pages() and related routines, but not so much on several of
the call sites--but those are generally just a couple of lines
changed, each.
Not much of the kernel is actually using this, which on one hand
reduces risk quite a lot. But on the other hand, testing coverage
is low. So I'd love it if, in particular, the Infiniband and PowerPC
folks could do a smoke test of this series for me.
Runtime testing for the call sites so far is pretty light:
* io_uring: Some directed tests from liburing exercise this, and
they pass.
* process_vm_access.c: A small directed test passes.
* gup_benchmark: the enhanced version hits the new gup.c code, and
passes.
* infiniband: Ran rdma-core tests: rdma-core/build/bin/run_tests.py
* VFIO: compiles (I'm vowing to set up a run time test soon, but it's
not ready just yet)
* powerpc: it compiles...
* drm/via: compiles...
* goldfish: compiles...
* net/xdp: compiles...
* media/v4l2: compiles...
[1] Some slow progress on get_user_pages() (Apr 2, 2019): https://lwn.net/Articles/784574/
[2] DMA and get_user_pages() (LPC: Dec 12, 2018): https://lwn.net/Articles/774411/
[3] The trouble with get_user_pages() (Apr 30, 2018): https://lwn.net/Articles/753027/
This patch (of 22):
There are four locations in gup.c that have a fair amount of code
duplication. This means that changing one requires making the same
changes in four places, not to mention reading the same code four times,
and wondering if there are subtle differences.
Factor out the common code into static functions, thus reducing the
overall line count and the code's complexity.
Also, take the opportunity to slightly improve the efficiency of the
error cases, by doing a mass subtraction of the refcount, surrounded by
get_page()/put_page().
Also, further simplify (slightly), by waiting until the the successful
end of each routine, to increment *nr.
Link: http://lkml.kernel.org/r/20200107224558.2362728-2-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jérôme Glisse <jglisse@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Björn Töpel <bjorn.topel@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Leon Romanovsky <leonro@mellanox.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
No functional change, just leverage the helper function to improve
readability as others.
Link: http://lkml.kernel.org/r/20200113070322.26627-1-richardw.yang@linux.intel.com
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: David Rientjes <rientjes@google.com>
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
sorry for not processing for a long time. I met it again.
patch v1 https://lkml.org/lkml/2019/9/20/656
do_machine_check()
do_memory_failure()
memory_failure()
hw_poison_user_mappings()
try_to_unmap()
pteval = swp_entry_to_pte(make_hwpoison_entry(subpage));
...and now we have a swap entry that indicates that the page entry
refers to a bad (and poisoned) page of memory, but gup_fast() at this
level of the page table was ignoring swap entries, and incorrectly
assuming that "!pxd_none() == valid and present".
And this was not just a poisoned page problem, but a generaly swap entry
problem. So, any swap entry type (device memory migration, numa
migration, or just regular swapping) could lead to the same problem.
Fix this by checking for pxd_present(), instead of pxd_none().
Link: http://lkml.kernel.org/r/1578479084-15508-1-git-send-email-hqjagain@gmail.com
Signed-off-by: Qiujun Huang <hqjagain@gmail.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
At some point filemap_write_and_wait() and
filemap_write_and_wait_range() got the exact same implementation with
the exception of the range being specified in *_range()
Similar to other functions in fs.h which call *_range(..., 0,
LLONG_MAX), change filemap_write_and_wait() to be a static inline which
calls filemap_write_and_wait_range()
Link: http://lkml.kernel.org/r/20191129160713.30892-1-ira.weiny@intel.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit 76a1850e4572 ("mm/debug.c: __dump_page() prints an extra line")
inadvertently removed printing of page flags for pages that are neither
anon nor ksm nor have a mapping. Fix that.
Using pr_cont() again would be a solution, but the commit explicitly
removed its use. Avoiding the danger of mixing up split lines from
multiple CPUs might be beneficial for near-panic dumps like this, so fix
this without reintroducing pr_cont().
Link: http://lkml.kernel.org/r/9f884d5c-ca60-dc7b-219c-c081c755fab6@suse.cz
Fixes: 76a1850e4572 ("mm/debug.c: __dump_page() prints an extra line")
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reported-by: Michal Hocko <mhocko@kernel.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Qian Cai <cai@lca.pw>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pavel Tatashin <pavel.tatashin@microsoft.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
kmemleak_lock as a rwlock on RT can possibly be acquired in atomic
context which does work.
Since the kmemleak operation is performed in atomic context make it a
raw_spinlock_t so it can also be acquired on RT. This is used for
debugging and is not enabled by default in a production like environment
(where performance/latency matters) so it makes sense to make it a
raw_spinlock_t instead trying to get rid of the atomic context. Turn
also the kmemleak_object->lock into raw_spinlock_t which is acquired
(nested) while the kmemleak_lock is held.
The time spent in "echo scan > kmemleak" slightly improved on 64core box
with this patch applied after boot.
[bigeasy@linutronix.de: redo the description, update comments. Merge the individual bits: He Zhe did the kmemleak_lock, Liu Haitao the ->lock and Yongxin Liu forwarded Liu's patch.]
Link: http://lkml.kernel.org/r/20191219170834.4tah3prf2gdothz4@linutronix.de
Link: https://lkml.kernel.org/r/20181218150744.GB20197@arrakis.emea.arm.com
Link: https://lkml.kernel.org/r/1542877459-144382-1-git-send-email-zhe.he@windriver.com
Link: https://lkml.kernel.org/r/20190927082230.34152-1-yongxin.liu@windriver.com
Signed-off-by: He Zhe <zhe.he@windriver.com>
Signed-off-by: Liu Haitao <haitao.liu@windriver.com>
Signed-off-by: Yongxin Liu <yongxin.liu@windriver.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
If we are already under list_lock, don't call kmalloc(). Otherwise we
will run into a deadlock because kmalloc() also tries to grab the same
lock.
Fix the problem by using a static bitmap instead.
WARNING: possible recursive locking detected
--------------------------------------------
mount-encrypted/4921 is trying to acquire lock:
(&(&n->list_lock)->rlock){-.-.}, at: ___slab_alloc+0x104/0x437
but task is already holding lock:
(&(&n->list_lock)->rlock){-.-.}, at: __kmem_cache_shutdown+0x81/0x3cb
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&(&n->list_lock)->rlock);
lock(&(&n->list_lock)->rlock);
*** DEADLOCK ***
Link: http://lkml.kernel.org/r/20191108193958.205102-2-yuzhao@google.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
For the uniform format, we use ocfs2_update_inode_fsync_trans() to
access t_tid in handle->h_transaction
Link: http://lkml.kernel.org/r/6ff9a312-5f7d-0e27-fb51-bc4e062fcd97@huawei.com
Signed-off-by: Yan Wang <wangyan122@huawei.com>
Reviewed-by: Jun Piao <piaojun@huawei.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
I found a NULL pointer dereference in ocfs2_update_inode_fsync_trans(),
handle->h_transaction may be NULL in this situation:
ocfs2_file_write_iter
->__generic_file_write_iter
->generic_perform_write
->ocfs2_write_begin
->ocfs2_write_begin_nolock
->ocfs2_write_cluster_by_desc
->ocfs2_write_cluster
->ocfs2_mark_extent_written
->ocfs2_change_extent_flag
->ocfs2_split_extent
->ocfs2_try_to_merge_extent
->ocfs2_extend_rotate_transaction
->ocfs2_extend_trans
->jbd2_journal_restart
->jbd2__journal_restart
// handle->h_transaction is NULL here
->handle->h_transaction = NULL;
->start_this_handle
/* journal aborted due to storage
network disconnection, return error */
->return -EROFS;
/* line 3806 in ocfs2_try_to_merge_extent (),
it will ignore ret error. */
->ret = 0;
->...
->ocfs2_write_end
->ocfs2_write_end_nolock
->ocfs2_update_inode_fsync_trans
// NULL pointer dereference
->oi->i_sync_tid = handle->h_transaction->t_tid;
The information of NULL pointer dereference as follows:
JBD2: Detected IO errors while flushing file data on dm-11-45
Aborting journal on device dm-11-45.
JBD2: Error -5 detected when updating journal superblock for dm-11-45.
(dd,22081,3):ocfs2_extend_trans:474 ERROR: status = -30
(dd,22081,3):ocfs2_try_to_merge_extent:3877 ERROR: status = -30
Unable to handle kernel NULL pointer dereference at
virtual address 0000000000000008
Mem abort info:
ESR = 0x96000004
Exception class = DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
Data abort info:
ISV = 0, ISS = 0x00000004
CM = 0, WnR = 0
user pgtable: 4k pages, 48-bit VAs, pgdp = 00000000e74e1338
[0000000000000008] pgd=0000000000000000
Internal error: Oops: 96000004 [#1] SMP
Process dd (pid: 22081, stack limit = 0x00000000584f35a9)
CPU: 3 PID: 22081 Comm: dd Kdump: loaded
Hardware name: Huawei TaiShan 2280 V2/BC82AMDD, BIOS 0.98 08/25/2019
pstate: 60400009 (nZCv daif +PAN -UAO)
pc : ocfs2_write_end_nolock+0x2b8/0x550 [ocfs2]
lr : ocfs2_write_end_nolock+0x2a0/0x550 [ocfs2]
sp : ffff0000459fba70
x29: ffff0000459fba70 x28: 0000000000000000
x27: ffff807ccf7f1000 x26: 0000000000000001
x25: ffff807bdff57970 x24: ffff807caf1d4000
x23: ffff807cc79e9000 x22: 0000000000001000
x21: 000000006c6cd000 x20: ffff0000091d9000
x19: ffff807ccb239db0 x18: ffffffffffffffff
x17: 000000000000000e x16: 0000000000000007
x15: ffff807c5e15bd78 x14: 0000000000000000
x13: 0000000000000000 x12: 0000000000000000
x11: 0000000000000000 x10: 0000000000000001
x9 : 0000000000000228 x8 : 000000000000000c
x7 : 0000000000000fff x6 : ffff807a308ed6b0
x5 : ffff7e01f10967c0 x4 : 0000000000000018
x3 : d0bc661572445600 x2 : 0000000000000000
x1 : 000000001b2e0200 x0 : 0000000000000000
Call trace:
ocfs2_write_end_nolock+0x2b8/0x550 [ocfs2]
ocfs2_write_end+0x4c/0x80 [ocfs2]
generic_perform_write+0x108/0x1a8
__generic_file_write_iter+0x158/0x1c8
ocfs2_file_write_iter+0x668/0x950 [ocfs2]
__vfs_write+0x11c/0x190
vfs_write+0xac/0x1c0
ksys_write+0x6c/0xd8
__arm64_sys_write+0x24/0x30
el0_svc_common+0x78/0x130
el0_svc_handler+0x38/0x78
el0_svc+0x8/0xc
To prevent NULL pointer dereference in this situation, we use
is_handle_aborted() before using handle->h_transaction->t_tid.
Link: http://lkml.kernel.org/r/03e750ab-9ade-83aa-b000-b9e81e34e539@huawei.com
Signed-off-by: Yan Wang <wangyan122@huawei.com>
Reviewed-by: Jun Piao <piaojun@huawei.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
There are users already and will be more of BITS_TO_BYTES() macro. Move
it to bitops.h for wider use.
In the case of ocfs2 the replacement is identical.
As for bnx2x, there are two places where floor version is used. In the
first case to calculate the amount of structures that can fit one memory
page. In this case obviously the ceiling variant is correct and
original code might have a potential bug, if amount of bits % 8 is not
0. In the second case the macro is used to calculate bytes transmitted
in one microsecond. This will work for all speeds which is multiply of
1Gbps without any change, for the rest new code will give ceiling value,
for instance 100Mbps will give 13 bytes, while old code gives 12 bytes
and the arithmetically correct one is 12.5 bytes. Further the value is
used to setup timer threshold which in any case has its own margins due
to certain resolution. I don't see here an issue with slightly shifting
thresholds for low speed connections, the card is supposed to utilize
highest available rate, which is usually 10Gbps.
Link: http://lkml.kernel.org/r/20200108121316.22411-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: Sudarsana Reddy Kalluru <skalluru@marvell.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The variable ret is being initialized with a value that is never read
and it is being updated later with a new value. The initialization is
redundant and can be removed.
Addresses Coverity ("Unused value")
Link: http://lkml.kernel.org/r/20191202164833.62865-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Gang He reports the failure of building fs/ocfs2/ as an external module
of the kernel installed on the system:
$ cd fs/ocfs2
$ make -C /lib/modules/`uname -r`/build M=`pwd` modules
If you want to make it work reliably, I'd recommend to remove ccflags-y
from the Makefiles, and to make header paths relative to the C files. I
think this is the correct usage of the #include "..." directive.
Link: http://lkml.kernel.org/r/20191227022950.14804-1-ghe@suse.com
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Gang He <ghe@suse.com>
Reported-by: Gang He <ghe@suse.com>
Reviewed-by: Gang He <ghe@suse.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Fixes coccicheck warnings:
fs/ocfs2/cluster/quorum.c:76:2-3: Unneeded semicolon
fs/ocfs2/dlmglue.c:573:2-3: Unneeded semicolon
Link: http://lkml.kernel.org/r/6ee3aa16-9078-30b1-df3f-22064950bd98@linux.alibaba.com
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Reported-by: Hulk Robot <hulkci@huawei.com>
Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In the only caller of dlm_migrate_lockres() - dlm_empty_lockres(),
target is checked for O2NM_MAX_NODES. Thus, the assertion in
dlm_migrate_lockres() is unnecessary and can be removed. The patch
eliminates such a check.
Link: http://lkml.kernel.org/r/20191218194111.26041-1-pakki001@umn.edu
Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add "issus" and correct it as "issues".
Link: http://lkml.kernel.org/r/20200105221950.8384-1-luca@lucaceresoli.net
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Here are some of the common spelling mistakes and typos that I've found
while fixing up spelling mistakes in the kernel. Most of them still
exist in more than two source files.
Link: http://lkml.kernel.org/r/20191229143626.51238-1-xndchn@gmail.com
Signed-off-by: Xiong <xndchn@gmail.com>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Chris Paterson <chris.paterson2@renesas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Since commit a49bd4d71637 ("mm, numa: rework do_pages_move"), the
semantic of move_pages() has changed to return the number of
non-migrated pages if they were result of a non-fatal reasons (usually a
busy page).
This was an unintentional change that hasn't been noticed except for LTP
tests which checked for the documented behavior.
There are two ways to go around this change. We can even get back to
the original behavior and return -EAGAIN whenever migrate_pages is not
able to migrate pages due to non-fatal reasons. Another option would be
to simply continue with the changed semantic and extend move_pages
documentation to clarify that -errno is returned on an invalid input or
when migration simply cannot succeed (e.g. -ENOMEM, -EBUSY) or the
number of pages that couldn't have been migrated due to ephemeral
reasons (e.g. page is pinned or locked for other reasons).
This patch implements the second option because this behavior is in
place for some time without anybody complaining and possibly new users
depending on it. Also it allows to have a slightly easier error
handling as the caller knows that it is worth to retry when err > 0.
But since the new semantic would be aborted immediately if migration is
failed due to ephemeral reasons, need include the number of
non-attempted pages in the return value too.
Link: http://lkml.kernel.org/r/1580160527-109104-1-git-send-email-yang.shi@linux.alibaba.com
Fixes: a49bd4d71637 ("mm, numa: rework do_pages_move")
Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com>
Suggested-by: Michal Hocko <mhocko@suse.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Wei Yang <richardw.yang@linux.intel.com>
Cc: <stable@vger.kernel.org> [4.17+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
If compound is true, this means it is a PMD mapped THP. Which implies
the page is not linked to any defer list. So the first code chunk will
not be executed.
Also with this reason, it would not be proper to add this page to a
defer list. So the second code chunk is not correct.
Based on this, we should remove the defer list related code.
[yang.shi@linux.alibaba.com: better patch title]
Link: http://lkml.kernel.org/r/20200117233836.3434-1-richardw.yang@linux.intel.com
Fixes: 87eaceb3faa5 ("mm: thp: make deferred split shrinker memcg aware")
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Suggested-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Yang Shi <yang.shi@linux.alibaba.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: <stable@vger.kernel.org> [5.4+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The daxctl unit test for the dax_kmem driver currently triggers the
(false positive) lockdep splat below. It results from the fact that
remove_memory_block_devices() is invoked under the mem_hotplug_lock()
causing lockdep entanglements with cpu_hotplug_lock() and sysfs (kernfs
active state tracking). It is a false positive because the sysfs
attribute path triggering the memory remove is not the same attribute
path associated with memory-block device.
sysfs_break_active_protection() is not applicable since there is no real
deadlock conflict, instead move memory-block device removal outside the
lock. The mem_hotplug_lock() is not needed to synchronize the
memory-block device removal vs the page online state, that is already
handled by lock_device_hotplug(). Specifically, lock_device_hotplug()
is sufficient to allow try_remove_memory() to check the offline state of
the memblocks and be assured that any in progress online attempts are
flushed / blocked by kernfs_drain() / attribute removal.
The add_memory() path safely creates memblock devices under the
mem_hotplug_lock(). There is no kernfs active state synchronization in
the memblock device_register() path, so nothing to fix there.
This change is only possible thanks to the recent change that refactored
memory block device removal out of arch_remove_memory() (commit
4c4b7f9ba948 "mm/memory_hotplug: remove memory block devices before
arch_remove_memory()"), and David's due diligence tracking down the
guarantees afforded by kernfs_drain(). Not flagged for -stable since
this only impacts ongoing development and lockdep validation, not a
runtime issue.
======================================================
WARNING: possible circular locking dependency detected
5.5.0-rc3+ #230 Tainted: G OE
------------------------------------------------------
lt-daxctl/6459 is trying to acquire lock:
ffff99c7f0003510 (kn->count#241){++++}, at: kernfs_remove_by_name_ns+0x41/0x80
but task is already holding lock:
ffffffffa76a5450 (mem_hotplug_lock.rw_sem){++++}, at: percpu_down_write+0x20/0xe0
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #2 (mem_hotplug_lock.rw_sem){++++}:
__lock_acquire+0x39c/0x790
lock_acquire+0xa2/0x1b0
get_online_mems+0x3e/0xb0
kmem_cache_create_usercopy+0x2e/0x260
kmem_cache_create+0x12/0x20
ptlock_cache_init+0x20/0x28
start_kernel+0x243/0x547
secondary_startup_64+0xb6/0xc0
-> #1 (cpu_hotplug_lock.rw_sem){++++}:
__lock_acquire+0x39c/0x790
lock_acquire+0xa2/0x1b0
cpus_read_lock+0x3e/0xb0
online_pages+0x37/0x300
memory_subsys_online+0x17d/0x1c0
device_online+0x60/0x80
state_store+0x65/0xd0
kernfs_fop_write+0xcf/0x1c0
vfs_write+0xdb/0x1d0
ksys_write+0x65/0xe0
do_syscall_64+0x5c/0xa0
entry_SYSCALL_64_after_hwframe+0x49/0xbe
-> #0 (kn->count#241){++++}:
check_prev_add+0x98/0xa40
validate_chain+0x576/0x860
__lock_acquire+0x39c/0x790
lock_acquire+0xa2/0x1b0
__kernfs_remove+0x25f/0x2e0
kernfs_remove_by_name_ns+0x41/0x80
remove_files.isra.0+0x30/0x70
sysfs_remove_group+0x3d/0x80
sysfs_remove_groups+0x29/0x40
device_remove_attrs+0x39/0x70
device_del+0x16a/0x3f0
device_unregister+0x16/0x60
remove_memory_block_devices+0x82/0xb0
try_remove_memory+0xb5/0x130
remove_memory+0x26/0x40
dev_dax_kmem_remove+0x44/0x6a [kmem]
device_release_driver_internal+0xe4/0x1c0
unbind_store+0xef/0x120
kernfs_fop_write+0xcf/0x1c0
vfs_write+0xdb/0x1d0
ksys_write+0x65/0xe0
do_syscall_64+0x5c/0xa0
entry_SYSCALL_64_after_hwframe+0x49/0xbe
other info that might help us debug this:
Chain exists of:
kn->count#241 --> cpu_hotplug_lock.rw_sem --> mem_hotplug_lock.rw_sem
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(mem_hotplug_lock.rw_sem);
lock(cpu_hotplug_lock.rw_sem);
lock(mem_hotplug_lock.rw_sem);
lock(kn->count#241);
*** DEADLOCK ***
No fixes tag as this has been a long standing issue that predated the
addition of kernfs lockdep annotations.
Link: http://lkml.kernel.org/r/157991441887.2763922.4770790047389427325.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
If we get here after successfully adding page to list, err would be 1 to
indicate the page is queued in the list.
Current code has two problems:
* on success, 0 is not returned
* on error, if add_page_for_migratioin() return 1, and the following err1
from do_move_pages_to_node() is set, the err1 is not returned since err
is 1
And these behaviors break the user interface.
Link: http://lkml.kernel.org/r/20200119065753.21694-1-richardw.yang@linux.intel.com
Fixes: e0153fc2c760 ("mm: move_pages: return valid node id in status if the page is already on the target node").
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Acked-by: Yang Shi <yang.shi@linux.alibaba.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Christoph Lameter <cl@linux.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
After commit ba72b4c8cf60 ("mm/sparsemem: support sub-section hotplug"),
when a mem section is fully deactivated, section_mem_map still records
the section's start pfn, which is not used any more and will be
reassigned during re-addition.
In analogy with alloc/free pattern, it is better to clear all fields of
section_mem_map.
Beside this, it breaks the user space tool "makedumpfile" [1], which
makes assumption that a hot-removed section has mem_map as NULL, instead
of checking directly against SECTION_MARKED_PRESENT bit. (makedumpfile
will be better to change the assumption, and need a patch)
The bug can be reproduced on IBM POWERVM by "drmgr -c mem -r -q 5" ,
trigger a crash, and save vmcore by makedumpfile
[1]: makedumpfile, commit e73016540293 ("[v1.6.7] Update version")
Link: http://lkml.kernel.org/r/1579487594-28889-1-git-send-email-kernelfans@gmail.com
Signed-off-by: Pingfan Liu <kernelfans@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Baoquan He <bhe@redhat.com>
Cc: Qian Cai <cai@lca.pw>
Cc: Kazuhito Hagio <k-hagio@ab.jp.nec.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
What we are trying to do is change the '=' character to a NUL terminator
and then at the end of the function we restore it back to an '='. The
problem is there are two error paths where we jump to the end of the
function before we have replaced the '=' with NUL.
We end up putting the '=' in the wrong place (possibly one element
before the start of the buffer).
Link: http://lkml.kernel.org/r/20200115055426.vdjwvry44nfug7yy@kili.mountain
Reported-by: syzbot+e64a13c5369a194d67df@syzkaller.appspotmail.com
Fixes: 095f1fc4ebf3 ("mempolicy: rework shmem mpol parsing and display")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Dmitry Vyukov <dvyukov@google.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Without memcg, there is a one-to-one mapping between the bdi and
bdi_writeback structures. In this world, things are fairly
straightforward; the first thing bdi_unregister() does is to shutdown
the bdi_writeback structure (or wb), and part of that writeback ensures
that no other work queued against the wb, and that the wb is fully
drained.
With memcg, however, there is a one-to-many relationship between the bdi
and bdi_writeback structures; that is, there are multiple wb objects
which can all point to a single bdi. There is a refcount which prevents
the bdi object from being released (and hence, unregistered). So in
theory, the bdi_unregister() *should* only get called once its refcount
goes to zero (bdi_put will drop the refcount, and when it is zero,
release_bdi gets called, which calls bdi_unregister).
Unfortunately, del_gendisk() in block/gen_hd.c never got the memo about
the Brave New memcg World, and calls bdi_unregister directly. It does
this without informing the file system, or the memcg code, or anything
else. This causes the root wb associated with the bdi to be
unregistered, but none of the memcg-specific wb's are shutdown. So when
one of these wb's are woken up to do delayed work, they try to
dereference their wb->bdi->dev to fetch the device name, but
unfortunately bdi->dev is now NULL, thanks to the bdi_unregister()
called by del_gendisk(). As a result, *boom*.
Fortunately, it looks like the rest of the writeback path is perfectly
happy with bdi->dev and bdi->owner being NULL, so the simplest fix is to
create a bdi_dev_name() function which can handle bdi->dev being NULL.
This also allows us to bulletproof the writeback tracepoints to prevent
them from dereferencing a NULL pointer and crashing the kernel if one is
tracing with memcg's enabled, and an iSCSI device dies or a USB storage
stick is pulled.
The most common way of triggering this will be hotremoval of a device
while writeback with memcg enabled is going on. It was triggering
several times a day in a heavily loaded production environment.
Google Bug Id: 145475544
Link: https://lore.kernel.org/r/20191227194829.150110-1-tytso@mit.edu
Link: http://lkml.kernel.org/r/20191228005211.163952-1-tytso@mit.edu
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: Chris Mason <clm@fb.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
On 32-bit platform the size of long is only 32 bits which makes wrong
offset in the array of 64 bit size.
Calculate offset based on BITS_PER_LONG.
Link: http://lkml.kernel.org/r/20200109103601.45929-1-andriy.shevchenko@linux.intel.com
Fixes: 30544ed5de43 ("lib/bitmap: introduce bitmap_replace() helper")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Yury Norov <yury.norov@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This adds IORING_OP_EPOLL_CTL, which can perform the same work as the
epoll_ctl(2) system call.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Also make it available outside of epoll, along with the helper that
decides if we need to copy the passed in epoll_event.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
No functional changes in this patch.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We're not consistent in how the file table is grabbed and assigned if we
have a command linked that requires the use of it.
Add ->file_table to the io_op_defs[] array, and use that to determine
when to grab the table instead of having the handlers set it if they
need to defer. This also means we can kill the IO_WQ_WORK_NEEDS_FILES
flag. We always initialize work->files, so io-wq can just check for
that.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
For personalities previously registered via IORING_REGISTER_PERSONALITY,
allow any command to select them. This is done through setting
sqe->personality to the id returned from registration, and then flagging
sqe->flags with IOSQE_PERSONALITY.
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If an application wants to use a ring with different kinds of
credentials, it can register them upfront. We don't lookup credentials,
the credentials of the task calling IORING_REGISTER_PERSONALITY is used.
An 'id' is returned for the application to use in subsequent personality
support.
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
John Hubbard
Dan Williams
Wei Yang
Qiujun Huang
Ira Weiny
Vlastimil Babka
He Zhe
Yu Zhao
wangyan
Andy Shevchenko
Colin Ian King
Masahiro Yamada
zhengbin
Aditya Pakki
Luca Ceresoli
Xiong
Yang Shi
Pingfan Liu
Dan Carpenter
Theodore Ts'o
Jens Axboe