aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/hid/hid-sensor-hub.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2015-05-12HID: hid-sensor-hub: Fix debug lock warningSrinivas Pandruvada1-3/+10
When CONFIG_DEBUG_LOCK_ALLOC is defined, mutex magic is compared and warned for (l->magic != l), here l is the address of mutex pointer. In hid-sensor-hub as part of hsdev creation, a per hsdev mutex is initialized during MFD cell creation. This hsdev, which contains, mutex is part of platform data for the a cell. But platform_data is copied in platform_device_add_data() in platform.c. This copy will copy the whole hsdev structure including mutex. But once copied the magic will no longer match. So when client driver call sensor_hub_input_attr_get_raw_value, this will trigger mutex warning. So to avoid this allocate mutex dynamically. This will be same even after copy. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-04-13Merge branch 'for-4.1/sensor-hub' into for-linusJiri Kosina1-74/+124
Conflicts: drivers/iio/common/hid-sensors/hid-sensor-trigger.c include/linux/hid-sensor-hub.h
2015-03-16HID: hid-sensor-hub: Fix sparse warningSrinivas Pandruvada1-2/+2
Since I can't change the type of hid_set_field argument 3, using __force __s32 to remove this warning. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-03-16HID: hid-sensor-hub: fix attribute read for logical usage idSrinivas Pandruvada1-2/+4
For defining enumeration values like report or power status events, the enumeration usage ids are enclosed in a logical collection. In this case we need to match logical usage id for pending read on this usage id. For example, in the below field, when read is requested for 0319, the report will contain one of the status usages like 850, 851 etc. In this case the raw event will not match 0319. So when logical collection matches, then wake up the pending thread. Physical(Sensor.OtherCustom) Logical(Sensor.0319) Application(Sensor.Sensor) Usage(6) Sensor.0850 Sensor.0851 Sensor.0852 Sensor.0853 Sensor.0854 Sensor.0855 Logical Minimum(1) Logical Maximum(5) Report Size(8) Report Count(1) Report Offset(24) Flags( Array Absolute ) Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-02-23HID: hid-sensor-hub: Enhance feature report set APISrinivas Pandruvada1-2/+20
Current API only allows setting one offset in the field. This API is extended to set multiple offsets in the field report. Also update parameters in the users of this API. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Reviewed-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-02-23HID: hid-sensor-hub: Enhance get feature report APISrinivas Pandruvada1-2/+13
Some hid sensor feature report can contain more than one reports. This API can now support receiving multiple values from the feature report. Also update the parameters in the users of this API. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-02-23HID: hid-sensor-hub: Extend API for async readsSrinivas Pandruvada1-30/+35
Add additional flag to read in async mode. In this mode the caller will get reply via registered callback for capture_sample. Callbacks can be registered using sensor_hub_register_callback function. The usage id parameter of the capture_sample can be matched with the usage id of the requested attribute. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-02-23HID: hid-sensor-hub: Add support for application collectionSrinivas Pandruvada1-4/+26
Section 4.2.5 of HID Sensor hub specification allows two methods defining sensor devices. - Each sensor device by its own collection - A top level application collection object, including multiple sensors. In the first method, each sensor can be in its own sensor application collection without a physical collection. In the second method there is a usage id for collection type, which is defined as an application collection, with multiple physical collections in it. It is possible to define fusion sensor with this and may have its own handler. If there is a callback registered for the collection type, then forward all reports for sensors in its collection to this handler. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-02-23HID: hid-sensor-hub: Allow parallel synchronous readsSrinivas Pandruvada1-49/+41
Current implementation only allows one outstanding synchronous read. This is a performance hit when user mode is requesting raw reads of sensor attributes on multiple sensors together. This change changes the mutex lock to per hid sensor hub device instead of global lock. Although request to hid sensor hub is serialized, there can be multiple outstanding read requests pending for responses via hid reports. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-02-17HID: sensor-hub: correct dyn_callback_lock IRQ-safe changeSrinivas Pandruvada1-3/+5
Commit 0ccf091d1fbc1f99bb7f93bff8cf346769a9b0cd ("HID: sensor-hub: make dyn_callback_lock IRQ-safe) was supposed to change locks in sensor_hub_get_callback(), but missed. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-11-25HID: hid-sensor-hub: Use mfd_add_hotplug_devices() helperJohan Hovold1-5/+3
Use mfd_add_hotplug_devices() helper to register the subdevices. Compile-only tested. Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-09-04HID: hid-sensor-hub: re-add mistakenly removed USB_DEVICE_ID_STM_HID_SENSOR idSrinivas Pandruvada1-0/+3
Adding USB_DEVICE_ID_STM_HID_SENSOR again in the quirk table. During 3.16 merge cycle somehow quirk for device id USB_DEVICE_ID_STM_HID_SENSOR is missing. I see commit dde3b45cd74e ("HID: hid-sensor-hub: new device id and quirk for STM Sensor hub") added new id USB_DEVICE_ID_STM_HID_SENSOR_1, but didn't really delete the old device id. Anyway we need to add this back, otherwise it breaks ST sensor hubs. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-08-12HID: hid-sensor-hub: use devm_ functions consistentlyHimangi Saraogi1-22/+11
Use devm_kzalloc for all calls to kzalloc and not just the first. Use devm functions for other allocations as well. The calls to free the allocated memory in the probe and remove functions are done away with and a label is removed in the probe function. The semantic match that finds the inconsistency is as follows: // <smpl> @@ @@ *devm_kzalloc(...) ... *kzalloc(...) // </smpl> Signed-off-by: Himangi Saraogi <himangi774@gmail.com> Acked-by: Julia Lawall <julia.lawall@lip6.fr> Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-06-30HID: sensor-hub: fix potential memory leakJiri Slaby1-0/+1
hsdev is not freed in sensor_hub_probe when kasprintf inside the for loop fails. This is because hsdev is not set to platform_data yet (to be freed by the code in the err_no_mem label). So free the memory explicitly in the 'if' branch, as this is the only place where this is (and will) be needed. Reported-by: coverity Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: srinivas pandruvada <srinivas.pandruvada@intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-06-10HID: sensor-hub: make dyn_callback_lock IRQ-safeJiri Kosina1-10/+14
dyn_callback_lock is being taken from IRQ context through hid_irq_in() -> hid_input_report() -> sensor_hub_raw_event() -> sensor_hub_get_callback(), therefore anyone else acquiring it needs to disable IRQs to disable deadlocks. Reported-by: Alexander Holler <holler@ahsoftware.de> Tested-by: Alexander Holler <holler@ahsoftware.de> Reported-by: Reyad Attiyat <reyad.attiyat@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-06-04Merge branches 'for-3.15/upstream-fixes' and 'for-3.16/upstream' into for-linusJiri Kosina1-1/+10
Conflicts: drivers/hid/hid-sensor-hub.c
2014-06-02HID: hid-sensor-hub: new device id and quirk for STM Sensor hubArchana Patni1-0/+3
Added STM sensor hub new device id. Also added this new device in HID_SENSOR_HUB_ENUM_QUIRK to fix report descriptors. These devices uses old FW which uses logical 0 as minimum. In these, HID reports are not using proper collection classes. So we need to fix report descriptors,for such devices. This will not have any impact, if the FW uses logical 1 as minimum. Signed-off-by: Archana Patni <archana.patni@intel.com> Signed-off-by: Subramony Sesha <subramony.sesha@intel.com> Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-05-28HID: hid-sensor-hub: Set report quirk for Microsoft SurfaceReyad Attiyat1-0/+9
Add the Microsoft Surface Pro 2 Type/Touch and default device hardware ID's Set report quirk for the device in hid-sensor-hub Signed-off-by: Reyad Attiyat <reyad.attiyat@gmail.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-05-06HID: sensor-hub: Add in quirk for sensor hub in Lenovo Ideapad YogasPeter F. Patel-Schneider1-0/+3
The sensor hub in Lenovo Yogas needs the enumeration quirk. I've been running the patch for over a month with no problems, whereas the unpatched drivers reliably mis-initialized the sensors. Signed-off-by: Peter F. Patel-Schneider <pfpschneider@gmail.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-04-03HID: sensor-hub: add sensor hub quirk for ThinkPad HelixStephen Chandler Paul1-2/+5
Just like some of the other laptops/tablets on the market with ultrabook sensors, the ThinkPad Helix's sensor hub requires a special quirk in order for it to power on properly. Without it the sensors are detected by the kernel and set up as usual, but they won't output any data. This will also fix the sensors on any other laptops with the same model of sensor hub. Signed-off-by: Stephen Chandler Paul <thatslyude@gmail.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-04-01Merge branch 'for-3.15/hid-sensor-hub' into for-linusJiri Kosina1-86/+124
2014-03-25HID: hid-sensor-hub: fix sleeping function called from invalid contextSrinivas Pandruvada1-4/+3
Fix issue with the sleeping calling hid_hw_request under spinlock. When i2c is used as HID transport, this is calling kmalloc, which can sleep. So remove call to this function while under spinlock. [ 1067.021961] Call Trace: [ 1067.021970] [<ffffffff8192f5f2>] dump_stack+0x4d/0x6f [ 1067.021976] [<ffffffff811109f2>] __might_sleep+0xd2/0xf0 [ 1067.021981] [<ffffffff811ea15b>] __kmalloc+0xeb/0x200 [ 1067.021989] [<ffffffff816e0cb3>] ? hid_alloc_report_buf+0x23/0x30 [ 1067.021993] [<ffffffff816e0cb3>] hid_alloc_report_buf+0x23/0x30 [ 1067.021997] [<ffffffff816f4cb7>] i2c_hid_request+0x57/0x110 [ 1067.022006] [<ffffffffa02bc61c>] sensor_hub_input_attr_get_raw_value+0xbc/0x100 [hid_sensor_hub] Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-02-17HID: hid-sensor-hub: Processing for duplicate physical idsSrinivas Pandruvada1-86/+102
In HID sensor hub, HID physical ids are used to represent different sensors. For example physical id of 0x73 in usage page = 0x20, represents an accelerometer. The HID sensor hub driver uses this physical ids to create platform devices using MFD. There is 1:1 correspondence between an phy id and a client driver. But in some cases these physical ids are reused. There is a phy id 0xe1, which specifies a custom sensor, which can exist multiple times to represent various custom sensors. In this case there can be multiple instances of client MFD drivers, processing specific custom sensor. In this case when client driver looks for report id or a field index, it should still get the report id specific to its own type. This is also true for reports, they should be directed towards correct instance. This change introduce a way to parse and tie physical devices to their correct instance. Summary of changes: - To get physical ids, use collections. If a collection of type=physical exist then use usage id as in the name of platform device name - As part of the platform data, we assign a hdsev instance, which has start and end of collection indexes. Using these indexes attributes can be tied to correct MFD client instances - When a report is received, call callback with correct hsdev instance. In this way using its private data stored as part of its registry, it can distinguish different sensors even when they have same physical and logical ids. This patch is co-authored with Archana Patni <archna.patni@intel.com>. Reported-by: Archana Patni <archana.patni@intel.com> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Archana Patni <archana.patni@intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-02-17HID: hid-sensor-hub: Add selector apiSrinivas Pandruvada1-0/+22
In some report descriptors, they leave holes in the selectors. In this case if we use hardcoded selector values, this will result in invalid values. For example, if there is selectors defined for Power State from OFF to D0 to D3. We can't use indexes of these states if some states are not implemented or not present in the report decriptors. In this case, we need to get the indexes from report descriptors. One API is added to get the index of a selector. This API will search for usage id in the field usage list and return the index. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-02-17HID: hid-sensor-hub: quirk for STM Sensor hubArchana Patni1-0/+3
Added STM sensor hub vendor id in HID_SENSOR_HUB_ENUM_QUIRK to fix report descriptors. These devices uses old FW which uses logical 0 as minimum. In these, HID reports are not using proper collection classes. So we need to fix report descriptors,for such devices. This will not have any impact, if the FW uses logical 1 as minimum. We look for usage id for "power and report state", and modify logical minimum value to 1. This is a follow-up patch to commit id 875e36f8. Signed-off-by: Archana Patni <archana.patni@linux.intel.com> Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-01-16HID: hid-sensor-hub: Fix buggy report descriptorsSrinivas Pandruvada1-0/+45
This addresses regression caused by commit id "751d17e23a9f7" iio: hid-sensors: Fix power and report state. This commit removed a quirk, to change the enumeration base to 1 from 0 based on an CONFIG paramter. There was objection to add more changes under this quirk, instead suggested to add an HID quirk. But there is no easy way to add HID qurik as the reports are not properly using collection class. The solution was to use logical minimum, which is a correct way. There were changes done in firmware to address this. Unfortunately some devices, still use old FW and can't be upgraded to newer version on Linux devices as there is no FW upgrade tool available for Linux devices. So we need to fix report descriptors, for such devices. This will not have any impact, if the FW uses logical 1 as minimum. In this patch we look for usage id for "power and report state", and modify logical minimum value to 1. Background on enum: In the original HID sensor hub firmwares all Named array enums were to 0-based. But the most recent hub implemented as 1-based, because of the implementation by one of the major OS vendor. Using logical minimum for the field as the base of enum. So we add logical minimum to the selector values before setting those fields. Some sensor hub FWs already changed logical minimum from 0 to 1 to reflect this and hope every other vendor will follow. There is no easy way to add a common HID quirk for NAry elements, even if the standard specifies these field as NAry, the collection used to describe selectors is still just "logical". Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-12-13Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hidLinus Torvalds1-0/+2
Pull HID fixes from Jiri Kosina: - Genius Gx Imperator Keyboard regression fix (missing break in case), by Ben Hutchings - duplicate sysfs entry error fix for hid-sensor-hub driver, by Srinivas Pandruvada * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: hid-sensor-hub: fix duplicate sysfs entry error HID: kye: Fix missing break in kye_report_fixup()
2013-12-09HID: hid-sensor-hub: fix duplicate sysfs entry errorSrinivas Pandruvada1-0/+2
Fix kernel warning and failure to register sensor hub devices with MFD. Now many devices has in-built sensor hubs. So by default this HID hub, is properly parsed and register individual sensors as platform device using MFD framework. But if a second sensor hub is attached via USB, which has same sensors, it will result in kernel warning and failure to register MFD cell as the platform device sysfs file name will be same as created by in-built sensor hubs. This patch sets MFD cell id to PLATFORM_DEVID_AUTO. In this way there will never be duplicate sysfs file names. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-12-02HID: hid-sensor-hub: Add logical min and maxSrinivas Pandruvada1-12/+8
Exporting logical minimum and maximum of HID fields as part of the hid sensor attribute info. This can be used for range checking and to calculate enumeration base for NAry fields of HID sensor hub. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-11-15Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hidLinus Torvalds1-5/+8
Pull HID updates from Jiri Kosina: - i2c-hid is not querying init reports any more, as it's not mandated by the spec, and annoys quite a few devices during enumeration, by Bibek Basu - a lot of fixes for Logitech devices, by Simon Wood - hid-apple now has an option to switch between Option and Command mode, by Nanno Langstraat - Some more workarounds for severely broken ELO devices, by Oliver Neukum - more devm conversions, by Benjamin Tissoires - wiimote correctness fixes, by David Herrmann - a lot of added support for various new device IDs and random small fixes here and there" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (34 commits) HID: enable Mayflash USB Gamecube Adapter HID: sony: Add force feedback support for Dualshock3 USB Input: usbtouchscreen: ignore eGalax/D-Wav/EETI HIDs HID: don't ignore eGalax/D-Wav/EETI HIDs HID: roccat: add missing special driver declarations HID:hid-lg4ff: Correct Auto-center strength for wheels other than MOMO and MOMO2 HID:hid-lg4ff: Initialize device properties before we touch autocentering. HID:hid-lg4ff: ensure ConstantForce is disabled when set to 0 HID:hid-lg4ff: Switch autocentering off when strength is set to zero. HID:hid-lg4ff: Scale autocentering force properly on Logitech wheel HID: roccat: fix Coverity CID 141438 HID: multitouch: add manufacturer to Kconfig help text HID: logitech-dj: small cleanup in rdcat() HID: remove self-assignment from hid_input_report HID: hid-sensor-hub: fix report size HID: i2c-hid: Stop querying for init reports HID: roccat: add support for Ryos MK keyboards HID: roccat: generalize some common code HID: roccat: add new device return value HID: wiimote: add pro-controller analog stick calibration ...
2013-10-30HID: hid-sensor-hub: fix report sizeSrinivas Pandruvada1-5/+8
Most of the hid sensor field size is reported in report_size field in the report descriptor. For rotation fusion sensor the quaternion data is 16 byte field, the report size was set to 4 and report count field is set to 4. So the total size is 16 bytes. But the current driver has a bug and not taking account for report count field. This causes user space to see only 4 bytes of data sent via IIO interface. The number of bytes in a field needs to take account of report_count field. Need to multiply report_size and report_count to get total number of bytes. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-10-01HID: Delay opening HID deviceSrinivas Pandruvada1-10/+35
Don't call hid_open_device till there is actually an user. This saves power by not opening underlying transport for HID. Also close device if there are no active mfd client using HID sensor hub. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-09-06Merge branch 'for-3.12/sensor-hub' into for-linusJiri Kosina1-32/+23
Conflicts: drivers/hid/hid-sensor-hub.c
2013-09-04HID: hid-sensor-hub: change kmalloc + memcpy by kmemdupAndy Shevchenko1-4/+3
The patch substitutes kmemdup for kmalloc followed by memcpy. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-09-04HID: hid-sensor-hub: move to devm_kzallocAndy Shevchenko1-12/+5
devm_kzalloc() will manage resources freeing and allows to make error path smaller and nicer. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-09-04HID: hid-sensor-hub: fix indentation accross the codeAndy Shevchenko1-16/+15
Patch just rearranges lines to be more compact and/or readable. Additionally it converts double space to one in several places. There is no functional change. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-09-04HID: sensor-hub: validate feature report detailsKees Cook1-1/+2
A HID device could send a malicious feature report that would cause the sensor-hub HID driver to read past the end of heap allocation, leaking kernel memory contents to the caller. CVE-2013-2898 Signed-off-by: Kees Cook <keescook@chromium.org> Cc: stable@kernel.org Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-08-26HID: hid-sensor-hub: fix style of commentsAndy Shevchenko1-1/+1
This patch fixes the style of the comments to be like following /* The commentary */ There is no functional change. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-02-25HID: use hid_hw_wait() instead of direct call to usbhidBenjamin Tissoires1-3/+2
This removes most of the dependencies between hid drivers and usbhid. The patch was constructed by replacing all occurences of usbhid_wait_io() by its hid_hw_wait() counterpart. Then, drivers not requiring USB_HID anymore have their USB_HID dependency cleaned in the Kconfig file. As of today, few drivers are still requiring an explicit USB layer dependency: * ntrig (a patch is on its way) * multitouch (one patch following and another on its way) * lenovo tpkbd * roccat * sony The last three are two deeply using direct calls to the usb subsystem to be able to be cleaned right now. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-02-25HID: use hid_hw_request() instead of direct call to usbhidBenjamin Tissoires1-4/+3
This allows the hid drivers to be independent from the transport layer. The patch was constructed by replacing all occurences of usbhid_submit_report() by its hid_hw_request() counterpart. Then, drivers not requiring USB_HID anymore have their USB_HID dependency cleaned in the Kconfig file. Finally, few drivers still depends on USB_HID. Many of them are requiring the io wait callback. They are found in the next patch. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> For the sensor-hub part: Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-02-21Merge branches 'for-3.9/logitech', 'for-3.9/multitouch', 'for-3.9/ntrig', 'for-3.9/thingm' and 'for-3.9/upstream' into for-linusJiri Kosina1-13/+1
2013-02-18HID: sensor-hub: don't limit the driver only to USB busMika Westerberg1-1/+2
We now have two transport mediums: USB and I2C, where sensor hubs can exists. So instead of constraining the driver to only these two we let it to match any HID bus as long as the group is HID_GROUP_SENSOR_HUB. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-02-18HID: sensor-hub: get rid of unused sensor_hub_grabbed_usages[] tableMika Westerberg1-5/+0
This table is not used anywhere in the driver so kill it. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-01-03HID: Use module_hid_driver macroH Hartley Sweeten1-13/+1
Use the new module_hid_driver macro in all HID drivers that have a simple register/unregister init/exit. This also converts the hid drivers that test for a failure of hid_register_driver() and report the failure. Using module_hid_driver in those drivers removes the failure message. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-12-12Merge branches 'for-3.7/upstream-fixes', 'for-3.8/hidraw', 'for-3.8/i2c-hid', 'for-3.8/multitouch', 'for-3.8/roccat', 'for-3.8/sensors' and 'for-3.8/upstream' into for-linusJiri Kosina1-35/+1
Conflicts: drivers/hid/hid-core.c
2012-12-12HID: sensors: autodetect USB HID sensor hubsAlexander Holler1-31/+1
It should not be necessary to add IDs for HID sensor hubs to lists in hid-core.c and hid-sensor-hub.c. So instead of a whitelist, autodetect such USB HID sensor hubs, based on a collection of type physical inside a useage page of type sensor. If some sensor hubs stil must be usable as raw devices, a blacklist might be created. Signed-off-by: Alexander Holler <holler@ahsoftware.de> Acked-by: "Pandruvada, Srinivas" <srinivas.pandruvada@intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-11-20HID: sensor-hub: Remove pointless NULL checkAlan Cox1-4/+0
report cannot be NULL, fortunately as we use it before we check ! Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-09-22HID: hid-sensor-hub: Fix sensor_hub_probe error handlingAxel Lin1-8/+4
Fix below issues: 1. In the case of goto err_close, hid_hw_stop(hdev) is called twice. Fix it. 2. If fails to allocate MFD device name, we also need to free all successfully allocated names in previous iterations. 3. In sensor_hub_remove(), Call hid_hw_close() before hid_hw_stop(). 4. Adjust unnecessary change lines for hid_err. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-09-22HID: hid-sensor-hub: Remove hdev->claimed settingAxel Lin1-2/+0
Current implementation of hid_hw_start() allows connect_mask to be 0. Setting hdev->claimed = HID_CLAIMED_INPUT before calling hid_hw_start() is not necessary. Remove it. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-09-18HID: sensors: remove some unneeded checksDan Carpenter1-9/+0
"report_id" is unsigned so it's never less than zero. These checks can be removed without any problem. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.