aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/hsi (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2013-08-29net: sctp: sctp_verify_init: clean up mandatory checks and add commentDaniel Borkmann1-14/+12
Add a comment related to RFC4960 explaning why we do not check for initial TSN, and while at it, remove yoda notation checks and clean up code from checks of mandatory conditions. That's probably just really minor, but makes reviewing easier. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-29tcp: TSO packets automatic sizingEric Dumazet7-7/+77
After hearing many people over past years complaining against TSO being bursty or even buggy, we are proud to present automatic sizing of TSO packets. One part of the problem is that tcp_tso_should_defer() uses an heuristic relying on upcoming ACKS instead of a timer, but more generally, having big TSO packets makes little sense for low rates, as it tends to create micro bursts on the network, and general consensus is to reduce the buffering amount. This patch introduces a per socket sk_pacing_rate, that approximates the current sending rate, and allows us to size the TSO packets so that we try to send one packet every ms. This field could be set by other transports. Patch has no impact for high speed flows, where having large TSO packets makes sense to reach line rate. For other flows, this helps better packet scheduling and ACK clocking. This patch increases performance of TCP flows in lossy environments. A new sysctl (tcp_min_tso_segs) is added, to specify the minimal size of a TSO packet (default being 2). A follow-up patch will provide a new packet scheduler (FQ), using sk_pacing_rate as an input to perform optional per flow pacing. This explains why we chose to set sk_pacing_rate to twice the current rate, allowing 'slow start' ramp up. sk_pacing_rate = 2 * cwnd * mss / srtt v2: Neal Cardwell reported a suspect deferring of last two segments on initial write of 10 MSS, I had to change tcp_tso_should_defer() to take into account tp->xmit_size_goal_segs Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Van Jacobson <vanj@google.com> Cc: Tom Herbert <therbert@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-29ipv6: drop fragmented ndisc packets by default (RFC 6980)Hannes Frederic Sowa5-0/+35
This patch implements RFC6980: Drop fragmented ndisc packets by default. If a fragmented ndisc packet is received the user is informed that it is possible to disable the check. Cc: Fernando Gont <fernando@gont.com.ar> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-29ARM: at91/dt: fix phy address in sama5xmb to match the reg propertyBoris BREZILLON1-1/+1
Fix phy0 address to match the reg property defined in phy0 node. Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-29net/cadence/macb: fix invalid 0 return if no phy is discovered on mii initBoris BREZILLON1-3/+3
Replace misleading -1 (-EPERM) by a more appropriate return code (-ENXIO) in macb_mii_probe function. Save macb_mii_probe return before branching to err_out_unregister to avoid erronous 0 return. Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-29bridge: inherit slave devices needed_headroomFlorian Fainelli1-0/+3
Some slave devices may have set a dev->needed_headroom value which is different than the default one, most likely in order to prepend a hardware descriptor in front of the Ethernet frame to send. Whenever a new slave is added to a bridge, ensure that we update the needed_headroom value accordingly to account for the slave needed_headroom value. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-29net: sctp: reorder sctp_globals to reduce cacheline usageDaniel Borkmann1-11/+9
Reduce cacheline usage from 2 to 1 cacheline for sctp_globals structure. By reordering elements, we can close gaps and simply achieve the following: Current situation: /* size: 80, cachelines: 2, members: 10 */ /* sum members: 57, holes: 4, sum holes: 16 */ /* padding: 7 */ /* last cacheline: 16 bytes */ Afterwards: /* size: 64, cachelines: 1, members: 10 */ /* padding: 7 */ Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-29net: mdio-sun4i: Convert to devm_* apiJisheng Zhang1-9/+9
Use devm_ioremap_resource instead of of_iomap() and devm_kzalloc() instead of kmalloc() to make cleanup paths simpler. This patch also fixes the resource leak caused by missing corresponding iounamp() of the of_iomap(). Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-29ixgbe: add support for older QSFP active DA cablesEmil Tantilov2-10/+50
This patch adds support for QSFP active direct attach (DA) cables which pre-date SFF-8436 v3.6. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-08-29ixgbe: include QSFP PHY types in ixgbe_is_sfp()Emil Tantilov1-0/+4
This patch makes sure that QSFP+ modules use the SFP+ code path for setting up link. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-08-29ixgbe: add 1Gbps support for QSFP+Emil Tantilov3-11/+33
This patch adds GB speed support for QSFP+ modules. Autonegotiation is not supported with QSFP+. The user will have to set the desired speed on both link partners using ethtool advertise setting. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-08-29ixgbe: fix SFF data dumps of SFP+ modules from an offsetEmil Tantilov1-5/+4
This patch fixes the read loop for the I2C data to account for the offset. Also includes a whitespace cleanup and removes ret_val as it is not needed. CC: Ben Hutchings <bhutchings@solarflare.com> Reported-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Reviewed-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-08-29ixgbe: cleanup some log messagesDon Skidmore2-5/+3
Some minor log messages cleanup, changing the level one message is logged, adding a bit of detail to another and put all the text on one line. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-08-29ixgbe: zero out mailbox buffer on initEmil Tantilov1-2/+2
This patch initializes the msgbuf array to 0 in order to avoid using random numbers from the memory as MAC address for the VF. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-08-29ixgbe: fix link test when connected to 1Gbps link partnerEmil Tantilov1-17/+10
This patch is a partial reverse of: commit dfcc4615f09c33454bc553567f7c7506cae60cb9 Author: Jacob Keller <jacob.e.keller@intel.com> Date: Thu Nov 8 07:07:08 2012 +0000 ixgbe: ethtool ixgbe_diag_test cleanup Specifically forcing the laser before the link check can lead to inconsistent results because it does not guarantee that the link will be negotiated correctly. Such is the case when dual speed SFP+ module is connected to a gigabit link partner. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-08-29ixgbe: fix incorrect limit value in ring transverseDon Skidmore1-1/+1
We were transversing the tx_ring with IXGBE_NUM_RX_QUEUES. Now this define happens to have the correct value but this is misleading and a change later could easily make this no longer true. I updated it to netdev->num_tx_queues like we use in ixgbe_get_strings(). Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-08-29ixgbe: Check return value on eeprom readsMark Rustad4-39/+107
This patch fixes the possible use of uninitialized memory by checking the return value on eeprom reads. These issues were identified by static analysis. In many cases error messages will be produced so that corrupted eeprom issues will be more visible. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-08-29ixgbe: disable link when adapter goes downJacob Keller3-0/+25
This patch fixes an issue with the 82599 adapter where it can potentially keep link lights up when the adapter has gone down. The patch adds a function which ensures link is disabled, and calls this function when the adapter transitions to a down state. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-08-29qlcnic: underflow in qlcnic_validate_max_tx_rings()Dan Carpenter2-2/+2
This function checks the upper bound but it doesn't check for negative numbers: if (txq > QLCNIC_MAX_TX_RINGS) { I've solved this by making "txq" a u32 type. I chose that because ->tx_count in the ethtool_channels struct is a __u32. This bug was added in aa4a1f7df7 ('qlcnic: Enable Tx queue changes using ethtool for 82xx Series adapter.'). Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-29xen-netback: rename functionsWei Liu3-133/+134
As we move to 1:1 model and melt xen_netbk and xenvif together, it would be better to use single prefix for all functions in xen-netback. Signed-off-by: Wei Liu <wei.liu2@citrix.com> Acked-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-29xen-netback: switch to NAPI + kthread 1:1 modelWei Liu3-507/+351
This patch implements 1:1 model netback. NAPI and kthread are utilized to do the weight-lifting job: - NAPI is used for guest side TX (host side RX) - kthread is used for guest side RX (host side TX) Xenvif and xen_netbk are made into one structure to reduce code size. This model provides better scheduling fairness among vifs. It is also prerequisite for implementing multiqueue for Xen netback. Signed-off-by: Wei Liu <wei.liu2@citrix.com> Acked-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-29xen-netback: remove page tracking facilityWei Liu1-75/+2
The data flow from DomU to DomU on the same host in current copying scheme with tracking facility: copy DomU --------> Dom0 DomU | ^ |____________________________| copy The page in Dom0 is a page with valid MFN. So we can always copy from page Dom0, thus removing the need for a tracking facility. copy copy DomU --------> Dom0 -------> DomU Simple iperf test shows no performance regression (obviously we copy twice either way): W/ tracking: ~5.3Gb/s W/o tracking: ~5.4Gb/s Signed-off-by: Wei Liu <wei.liu2@citrix.com> Acked-by: Ian Campbell <ian.campbell@citrix.com> Acked-by: Matt Wilson <msw@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-28batman-adv: send GW_DEL event when the gw client mode is deselectedAntonio Quartulli3-0/+32
Whenever the GW client mode is deselected, a DEL event has to be sent in order to tell userspace that the current gateway has been lost. Send the uevent on state change only if a gateway was currently selected. Reported-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-08-28batman-adv: Start new development cycleSimon Wunderlich1-1/+1
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-08-28batman-adv: move enum definition at the top of the fileAntonio Quartulli1-15/+16
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-08-28batman-adv: set skb priority according to contentSimon Wunderlich10-2/+91
The skb priority field may help the wireless driver to choose the right queue (e.g. WMM queues). This should be set in batman-adv, as this information is only available here. This patch adds support for IPv4/IPv6 DS fields and VLAN PCP. Note that only VLAN PCP is used if a VLAN header is present. Also initially set TC_PRIO_CONTROL only for self-generated packets, and keep the priority set by higher layers. Signed-off-by: Simon Wunderlich <simon@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-08-28netfilter: ctnetlink: fix uninitialized variableFlorian Westphal1-1/+1
net/netfilter/nf_conntrack_netlink.c: In function 'ctnetlink_nfqueue_attach_expect': 'helper' may be used uninitialized in this function It was only initialized in if CTA_EXPECT_HELP_NAME attribute was present, it must be NULL otherwise. Problem added recently in bd077937 (netfilter: nfnetlink_queue: allow to attach expectations to conntracks). Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-08-28netfilter: add IPv6 SYNPROXY targetPatrick McHardy3-0/+509
Add an IPv6 version of the SYNPROXY target. The main differences to the IPv4 version is routing and IP header construction. Signed-off-by: Patrick McHardy <kaber@trash.net> Tested-by: Martin Topholm <mph@one.com> Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-08-28net: syncookies: export cookie_v6_init_sequence/cookie_v6_checkPatrick McHardy2-9/+20
Extract the local TCP stack independant parts of tcp_v6_init_sequence() and cookie_v6_check() and export them for use by the upcoming IPv6 SYNPROXY target. Signed-off-by: Patrick McHardy <kaber@trash.net> Acked-by: David S. Miller <davem@davemloft.net> Tested-by: Martin Topholm <mph@one.com> Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-08-28netfilter: add SYNPROXY core/targetPatrick McHardy13-1/+1066
Add a SYNPROXY for netfilter. The code is split into two parts, the synproxy core with common functions and an address family specific target. The SYNPROXY receives the connection request from the client, responds with a SYN/ACK containing a SYN cookie and announcing a zero window and checks whether the final ACK from the client contains a valid cookie. It then establishes a connection to the original destination and, if successful, sends a window update to the client with the window size announced by the server. Support for timestamps, SACK, window scaling and MSS options can be statically configured as target parameters if the features of the server are known. If timestamps are used, the timestamp value sent back to the client in the SYN/ACK will be different from the real timestamp of the server. In order to now break PAWS, the timestamps are translated in the direction server->client. Signed-off-by: Patrick McHardy <kaber@trash.net> Tested-by: Martin Topholm <mph@one.com> Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-08-28net: syncookies: export cookie_v4_init_sequence/cookie_v4_checkPatrick McHardy2-11/+22
Extract the local TCP stack independant parts of tcp_v4_init_sequence() and cookie_v4_check() and export them for use by the upcoming SYNPROXY target. Signed-off-by: Patrick McHardy <kaber@trash.net> Acked-by: David S. Miller <davem@davemloft.net> Tested-by: Martin Topholm <mph@one.com> Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-08-28netfilter: nf_conntrack: make sequence number adjustments usuable without NATPatrick McHardy18-376/+369
Split out sequence number adjustments from NAT and move them to the conntrack core to make them usable for SYN proxying. The sequence number adjustment information is moved to a seperate extend. The extend is added to new conntracks when a NAT mapping is set up for a connection using a helper. As a side effect, this saves 24 bytes per connection with NAT in the common case that a connection does not have a helper assigned. Signed-off-by: Patrick McHardy <kaber@trash.net> Tested-by: Martin Topholm <mph@one.com> Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-08-28netfilter: nf_defrag_ipv6.o included twiceNathan Hintz1-1/+1
'nf_defrag_ipv6' is built as a separate module; it shouldn't be included in the 'nf_conntrack_ipv6' module as well. Signed-off-by: Nathan Hintz <nlhintz@hotmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-08-28netfilter: ip[6]t_REJECT: tcp-reset using wrong MAC source if bridgedPhil Oester2-2/+39
As reported by Casper Gripenberg, in a bridged setup, using ip[6]t_REJECT with the tcp-reset option sends out reset packets with the src MAC address of the local bridge interface, instead of the MAC address of the intended destination. This causes some routers/firewalls to drop the reset packet as it appears to be spoofed. Fix this by bypassing ip[6]_local_out and setting the MAC of the sender in the tcp reset packet. This closes netfilter bugzilla #531. Signed-off-by: Phil Oester <kernel@linuxace.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-08-27sfc: Use extended MC_CMD_SENSOR_INFO and MC_CMD_READ_SENSORSBen Hutchings1-44/+95
We need to use extended requests to read and get metadata for sensors numbered > 31. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-08-27sfc: Return an error code when a sensor is busy.Alexandre Rames1-1/+6
[bwh: Also name this new state, though we don't expect to see it in an event] Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-08-27sfc: Add support for reading packet length from prefixBen Hutchings2-2/+14
Define a flag for struct efx_rx_buffer and efx_rx_packet() that indicates packet length must be read from the prefix. If this is set, read the length in __efx_rx_packet() (when the prefix should have arrived in cache). Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-08-27sfc: Add TX merged completion counterBen Hutchings3-0/+6
Add a counter for TX merged completion events. This is implemented in the common TX path, because the NIC event handlers only know how many descriptors were completed, not how many packets. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-08-27sfc: Generalise packet hash lookup to support EF10 RX prefixJon Cooper6-13/+28
EF10 uses an entirely different RX prefix format from Falcon-arch. Extend struct efx_nic_type to describe this. [bwh: Also replace the magic numbers used for the Falcon-arch RX prefix] Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-08-27sfc: Rename EFX_PAGE_BLOCK_SIZE to EFX_VI_PAGE_SIZE and adjust commentsBen Hutchings1-4/+4
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-08-27sfc: Remove early call to efx_nic_type::reconfigure_mac in efx_reset_up()Ben Hutchings1-2/+0
efx_reset_up() calls efx_nic_type::reconfigure_mac once directly, then again through efx_start_all() -> efx_start_port() -> efx->type->reconfigure_mac(). This first call is also made too early to work properly on EF10. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-08-27sfc: use MCDI epoch flag to improve MC reboot detection in the driverDaniel Pieczko2-6/+15
The Huntington MC will reject all MCDI requests after an MC reboot until it sees one with the NOT_EPOCH flag clear. This flag is set by default for all requests, and then cleared on the first request after we detect that an MC reboot has occurred. The old MCDI_STATUS_DELAY_COUNT gave a timeout of 10ms, which was not long enough for the driver to detect that a reboot had occurred based on the warm boot count while calling efx_mcdi_poll_reboot() from the loop in efx_mcdi_ev_death(). Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-08-27sfc: Add EF10 support for TX/RX DMA error events handling.Alexandre Rames5-11/+15
Also, since we handle all DMA errors in the same way, merge RESET_TYPE_(RX|TX)_DESC_FETCH into RESET_TYPE_DMA_ERROR. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-08-27sfc: Add a function pointer to abstract write of host time into NIC shared memoryLaurence Evans3-2/+16
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-08-27sfc: PTP MCDI requests need to initialise periph ID fieldLaurence Evans1-0/+7
This field is ignored by Siena firmware but is significant to EF10 firmware. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-08-27sfc: Delegate MAC/NIC statistic description to efx_nic_typeBen Hutchings8-389/+498
Various hardware statistics that are available for Siena are unavailable or meaningless for Falcon. Huntington adds further to the NIC-type-specific statistics, as it has different MAC blocks from Falcon/Siena. All NIC types still provide most statistics by DMA, and use little-endian byte order. Therefore: 1. Add some general utility functions for reporting hardware statistics, efx_nic_describe_stats() and efx_nic_update_stats(). 2. Add an efx_nic_type::describe_stats operation to get the number and names of statistics, implemented using efx_nic_describe_stats() 3. Change efx_nic_type::update_stats to store the core statistics (struct rtnl_link_stats64) or full statistics (array of u64) in a caller-provided buffer. Use efx_nic_update_stats() to aid in the implementation. 4. Rename struct efx_ethtool_stat to struct efx_sw_stat_desc and EFX_ETHTOOL_NUM_STATS to EFX_ETHTOOL_SW_STAT_COUNT. 5. Remove efx_nic::mac_stats and struct efx_mac_stats. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-08-27sfc: Remove driver-local struct ethtool_stringBen Hutchings1-24/+13
It's not really helpful to pretend ethtool string arrays are structured. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-08-27sfc: Remove more left-overs from Falcon GMAC supportBen Hutchings3-18/+6
We only ever used the XMAC (10G link speed) in production. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-08-27sfc: Move MTD operations into efx_nic_typeBen Hutchings9-831/+807
Merge the per-NIC-type MTD probe selection and struct efx_mtd_ops into struct efx_nic_type. Move the implementations into the appropriate source files. Several NVRAM functions are now only called from MTD operations which are now implemented in the same file (falcon.c or mcdi.c). There is no need for them to be extern, or to be defined at all if CONFIG_SFC_MTD is not enabled, so move them into the #ifdef CONFIG_SFC_MTD sections in those files. Most of the SPI-related definitions are also only used in falcon.c, so move them there. Put the remainder of spi.h into nic.h (which previously included it). Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-08-27openvswitch: optimize flow compare and mask functionsAndy Zhou2-39/+44
Make sure the sw_flow_key structure and valid mask boundaries are always machine word aligned. Optimize the flow compare and mask operations using machine word size operations. This patch improves throughput on average by 15% when CPU is the bottleneck of forwarding packets. This patch is inspired by ideas and code from a patch submitted by Peter Klausler titled "replace memcmp() with specialized comparator". However, The original patch only optimizes for architectures support unaligned machine word access. This patch optimizes for all architectures. Signed-off-by: Andy Zhou <azhou@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.