aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/hwmon (follow)
AgeCommit message (Collapse)AuthorFilesLines
2016-04-19hwmon: (it87) Add support for IT8628EGuenter Roeck2-3/+18
IT8628E is functionally identical to IT8620E. Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-04-19hwmon: (it87) Fix pwm_temp_map for system with 6 pwm channelsGuenter Roeck1-8/+15
Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-04-19hwmon: (it87) Support automatic pwm control on newer chipsGuenter Roeck1-14/+187
Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-04-19hwmon: (it87) Enhance validation for fan4 and fan5Guenter Roeck1-0/+23
Several of the chips supported by this driver have a configuration register to enable fan4 and fan5. Use those registers to determine if fan4 and fan5 tachometers are supported. Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-04-19hwmon: (it87) Support disabling fan control for all pwm control and chipsGuenter Roeck1-21/+31
On/Off mode is only supported for pwm controls 0-2, and not supported at all for IT8603E/IT8623E. For pwm controls 3-6 and for IT8603E/IT8623E, SmartGuardian mode is always enabled. Use it and set the pwm value to the maximum if fan control is disabled. Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-04-19hwmon: (it87) Formatting cleanupGuenter Roeck1-75/+80
Fix various checkpatch complaints to clean up the code and make it easier to read. CHECK: Do not include the paragraph about writing to the FSF CHECK: Alignment should match open parenthesis CHECK: Logical continuations should be on the previous line CHECK: No space is necessary after a cast CHECK: Please don't use multiple blank lines CHECK: Please use a blank line after function/struct/union/enum declarations CHECK: spaces preferred around that '+' (ctx:VxV) WARNING: Missing a blank line after declarations No functional change. Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-04-19hwmon: (it87) Use defines for array sizes and sensor countsGuenter Roeck1-24/+34
Using array size defines makes it much easier to find errors in index values and loop counts. Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-04-19hwmon: (it87) Use BIT macroGuenter Roeck1-144/+146
Using the BIT macro makes the code a little easier to read and has the added benefit of making checkpatch happy. Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-04-19hwmon: (it87) Add support for VIN7 to VIN10 on IT8620EGuenter Roeck1-5/+24
IT8620E supports three additional voltage sensors. Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-04-19hwmon: (it87) Simplify reading voltage registersGuenter Roeck1-9/+13
Voltage registers are non-sequential. Use a register array instead of a macro to map sensor index to register to simplify the code and to make it easier to add additional voltage sensors. Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-04-19hwmon: (it87) Support up to 6 temperature sensors on IT8620EGuenter Roeck1-8/+40
Add support for the additional temperature sensors on IT8620E. Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-04-19hwmon: (it87) Convert to use new hwmon APIGuenter Roeck1-74/+19
Convert to use devm_hwmon_device_register_with_groups to simplify code and reduce code size. This also attaches sysfs attributes to the hwmon device and no longer to the platform device. Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-04-19hwmon: (it87) Use single group and is_visible for miscellaneous attributesGuenter Roeck1-48/+33
Use is_visible to determine if attributes should be generated or not. This simplifies the code and reduces object size by about 120 bytes on x86_64. Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-04-19hwmon: (it87) Use is_visible for pwm attributesGuenter Roeck1-72/+65
Simplify code and reduce object size by about 250 bytes on x86_64. Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-04-19hwmon: (it87) Use is_visible for fan attributesGuenter Roeck1-85/+55
Simplify code and reduce object size by almost 500 bytes on x86_64. Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-04-19hwmon: (it87) Use is_visible for temperature sensorsGuenter Roeck1-51/+36
Simplify code and reduce object size by more than 200 bytes on x86_64. Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-04-19hwmon: (it87) Use is_visible for voltage sensorsGuenter Roeck1-68/+56
Simplify code and reduce object size by more than 300 bytes on x86_64. Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-04-19hwmon: (it87) Rearrange code to avoid forward declarationsGuenter Roeck1-336/+327
Cleanup only, no functional change. Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-04-19hwmon: (it87) Add support for second Super-IO chipGuenter Roeck1-15/+34
The Super-IO chip can also reside at SIO address 0x4e, and there can be two Super-IO chips in the system. Add support for it. Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-04-19hwmon: (it87) Pass SIO base address as parameter to superio functionsGuenter Roeck1-65/+72
This will let us support more than one chip on different SIO addresses with the same driver. Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-04-19hwmon: (it87) Don't use pdev as static driver variableGuenter Roeck1-3/+5
Using the same varible name for function names and as static variable invites misuse and prevents us from adding support for a second chip. Rename pdev to it87_pdev and limit its use to where it is needed. Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-04-19hwmon: (it87) Simplify error return in it87_device_addGuenter Roeck1-7/+3
Return directly on errors if there is no cleanup necessary. Don't create an error message on memory allocation errors. Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-04-19hwmon: (it87) Add support for second pwm frequency registerGuenter Roeck1-31/+69
Recent chips have a separate register to select the pwm2 frequency. Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-04-19hwmon: (it87) Add support for all pwm channels on IT8620EGuenter Roeck1-20/+94
IT8620E supports up to 6 pwm channels. Add support for it. Also check if fan tachometers 4..6 are enabled before instantiating the respective sysfs attributes. Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-04-19hwmon: (it87) Add feature flag for AVCC3 supportGuenter Roeck1-8/+13
AVCC3 is supported on IT8620E, similar to IT8603E. Add feature flag to indicate AVCC3 support. Don't enable it for now on IT8620E since it is unclear if this chip supports it correctly. Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-04-19hwmon: (fam15h_power) Add platform check functionHuang Rui1-2/+7
This patch adds a platform check function to make code more readable. Signed-off-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-04-19hwmon: (fam15h_power) Add documentation for TDP and accumulated power algorithmHuang Rui1-1/+1
This patch adds the description to explain the TDP reporting mechanism and accumulated power algorithm. Signed-off-by: Huang Rui <ray.huang@amd.com> Cc: Borislav Petkov <bp@alien8.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-04-19hwmon: (fam15h_power) Introduce a cpu accumulated power reporting algorithmHuang Rui1-4/+124
This patch introduces an algorithm that computes the average power by reading a delta value of “core power accumulator” register during measurement interval, and then dividing delta value by the length of the time interval. User is able to use power1_average entry to measure the processor power consumption and power1_average_interval entry to set the interval. A simple example: ray@hr-ub:~/tip$ sensors fam15h_power-pci-00c4 Adapter: PCI adapter power1: 19.58 mW (avg = 2.55 mW, interval = 0.01 s) (crit = 15.00 W) ... The result is current average processor power consumption in 10 millisecond. The unit of the result is uWatt. Suggested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Huang Rui <ray.huang@amd.com> Cc: Borislav Petkov <bp@alien8.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-04-19hwmon: (fam15h_power) Add ptsc counter value for accumulated powerHuang Rui1-0/+4
PTSC is the performance timestamp counter value in a cpu core and the cores in one compute unit have the fixed frequency. So it picks up the performance timestamp counter value of the first core per compute unit to measure the interval for average power per compute unit. Signed-off-by: Huang Rui <ray.huang@amd.com> Cc: Borislav Petkov <bp@alien8.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-04-19hwmon: (fam15h_power) Add compute unit accumulated powerHuang Rui1-1/+71
This patch adds a member in fam15h_power_data which specifies the compute unit accumulated power. It adds do_read_registers_on_cu to do all the read to all MSRs and run it on one of the online cores on each compute unit with smp_call_function_many(). This behavior can decrease IPI numbers. Suggested-by: Borislav Petkov <bp@alien8.de> Signed-off-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-04-19hwmon: (fam15h_power) Add CPU_SUP_AMD as the dependenceHuang Rui1-1/+1
This patch adds CONFIG_CPU_SUP_AMD as the dependence of fam15h_power driver. Because the following patch will use the interface from x86/kernel/cpu/amd.c. Otherwise, the below error might be encountered: All errors (new ones prefixed by >>): drivers/built-in.o: In function `fam15h_power_probe': >> fam15h_power.c:(.text+0x26e3a3): undefined reference to >> `amd_get_cores_per_cu' fam15h_power.c:(.text+0x26e41e): undefined reference to `amd_get_cores_per_cu' Reported-by: build test robot <lkp@intel.com> Acked-by: Borislav Petkov <bp@suse.de> Signed-off-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-04-19hwmon: (max31722) Add support for MAX31722/MAX31723 temperature sensorsTiberiu Breana3-0/+176
Add basic support for the Maxim Integrated MAX31722/MAX31723 SPI temperature sensors / thermostats. Includes: - ACPI support; - raw temperature readings; - power management Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX31722-MAX31723.pdf Signed-off-by: Tiberiu Breana <tiberiu.a.breana@intel.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-04-19hwmon: (ads7828) Enable internal referenceAkshay Bhat1-0/+10
On ads7828 the internal reference defaults to off upon power up. When using internal reference, it needs to be turned on and the voltage needs to settle before normal conversion cycle can be started. Hence perform a dummy read in the probe to enable the internal reference allowing the voltage to settle before performing a normal read. Without this fix, the first read from the ADC when using internal reference always returns incorrect data. Signed-off-by: Akshay Bhat <akshay.bhat@timesys.com> Cc: stable@vger.kernel.org # v4.1+ Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-03-27hwmon: (max1111) Return -ENODEV from max1111_read_channel if not instantiatedGuenter Roeck1-0/+6
arm:pxa_defconfig can result in the following crash if the max1111 driver is not instantiated. Unhandled fault: page domain fault (0x01b) at 0x00000000 pgd = c0004000 [00000000] *pgd=00000000 Internal error: : 1b [#1] PREEMPT ARM Modules linked in: CPU: 0 PID: 300 Comm: kworker/0:1 Not tainted 4.5.0-01301-g1701f680407c #10 Hardware name: SHARP Akita Workqueue: events sharpsl_charge_toggle task: c390a000 ti: c391e000 task.ti: c391e000 PC is at max1111_read_channel+0x20/0x30 LR is at sharpsl_pm_pxa_read_max1111+0x2c/0x3c pc : [<c03aaab0>] lr : [<c0024b50>] psr: 20000013 ... [<c03aaab0>] (max1111_read_channel) from [<c0024b50>] (sharpsl_pm_pxa_read_max1111+0x2c/0x3c) [<c0024b50>] (sharpsl_pm_pxa_read_max1111) from [<c00262e0>] (spitzpm_read_devdata+0x5c/0xc4) [<c00262e0>] (spitzpm_read_devdata) from [<c0024094>] (sharpsl_check_battery_temp+0x78/0x110) [<c0024094>] (sharpsl_check_battery_temp) from [<c0024f9c>] (sharpsl_charge_toggle+0x48/0x110) [<c0024f9c>] (sharpsl_charge_toggle) from [<c004429c>] (process_one_work+0x14c/0x48c) [<c004429c>] (process_one_work) from [<c0044618>] (worker_thread+0x3c/0x5d4) [<c0044618>] (worker_thread) from [<c004a238>] (kthread+0xd0/0xec) [<c004a238>] (kthread) from [<c000a670>] (ret_from_fork+0x14/0x24) This can occur because the SPI controller driver (SPI_PXA2XX) is built as module and thus not necessarily loaded. While building SPI_PXA2XX into the kernel would make the problem disappear, it appears prudent to ensure that the driver is instantiated before accessing its data structures. Cc: Arnd Bergmann <arnd@arndb.de> Cc: stable@vger.kernel.org Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-03-20Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds1-3/+11
Pull ARM SoC driver updates from Arnd Bergmann: "Driver updates for ARM SoCs, these contain various things that touch the drivers/ directory but got merged through arm-soc for practical reasons: - Rockchip rk3368 gains power domain support - Small updates for the ARM spmi driver - The Atmel PMC driver saw a larger rework, touching both arch/arm/mach-at91 and drivers/clk/at91 - All reset controller driver changes alway get merged through arm-soc, though this time the largest change is the addition of a MIPS pistachio reset driver - One bugfix for the NXP (formerly Freescale) i.MX weim bus driver" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (43 commits) bus: imx-weim: Take the 'status' property value into account clk: at91: remove useless includes clk: at91: pmc: remove useless capacities handling clk: at91: pmc: drop at91_pmc_base usb: gadget: atmel: access the PMC using regmap ARM: at91: remove useless includes and function prototypes ARM: at91: pm: move idle functions to pm.c ARM: at91: pm: find and remap the pmc ARM: at91: pm: simply call at91_pm_init clk: at91: pmc: move pmc structures to C file clk: at91: pmc: merge at91_pmc_init in atmel_pmc_probe clk: at91: remove IRQ handling and use polling clk: at91: make use of syscon/regmap internally clk: at91: make use of syscon to share PMC registers in several drivers hwmon: (scpi) add energy meter support firmware: arm_scpi: add support for 64-bit sensor values firmware: arm_scpi: decrease Tx timeout to 20ms firmware: arm_scpi: fix send_message and sensor_get_value for big-endian reset: sti: Make reset_control_ops const reset: zynq: Make reset_control_ops const ...
2016-03-08hwmon: Create an NSA320 hardware monitoring driverAdam Baker3-0/+231
Create a driver to support the hardware monitoring chip present in the Zyxel NSA320 and some of the other Zyxel NAS devices. The driver reads fan speed and temperature from a suitably pre-programmed MCU on the device. Signed-off-by: Adam Baker <linux@baker-net.org.uk> [groeck: Dropped .owner field initialization] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-03-05hwmon: (adm1275) Add support for ADM1278Guenter Roeck2-3/+57
ADM1278 is mostly compatible to other chips of the same series. Besides the usual difference in coefficients, it supports a temperature sensor, and it can measure both input and output voltage at the same time. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-03-05hwmon: (ntc_thermistor) Add support for ncpXXxh103Joseph McNally2-1/+45
This patch adds support for the Murata NCP15XH103 thermistor series. Signed-off-by: Joseph McNally <jmcna06@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-03-05hwmon: (iio_hwmon) Allow the driver to accept hypen in device tree node namesSanchayan Maity1-1/+10
Currently the driver calls hwmon_device_register_with_groups which does not accept hypen in node name and returns EINVAL. Use of hypen in device tree node name results in probe failure., however use of hypen in device tree node name is perfectly acceptable. Change this by allocating a duplicate managed string, replacing hypen with underscore and then calling hwmon_device_register_with_groups. This allows the use of hypen in device tree node name while maintaining backwards compatibility and preventing any possible regressions with user space. Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-03-05hwmon: Add LTC2990 sensor driverMike Looijmans3-0/+176
This adds support for the Linear Technology LTC2990 I2C System Monitor. The LTC2990 supports a combination of voltage, current and temperature monitoring. This driver currently only supports reading two currents by measuring two differential voltages across series resistors, in addition to the Vcc supply voltage and internal temperature. This is sufficient to support the Topic Miami SOM which uses this chip to monitor the currents flowing into the FPGA and the CPU parts. Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-03-05hwmon: (vexpress) rename vexpress hwmon implementationSudeep Holla2-1/+1
The vexpress hwmon implementation is currently just called vexpress. This is a problem because it clashes with another module with the same name in regulators. This patch renames the vexpress hwmon implementation to vexpress-hwmon so that there will be no clash in the module namespace. Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Jean Delvare <jdelvare@suse.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: lm-sensors@lm-sensors.org Reported-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-02-24Merge tag 'scpi-for-v4.6/updates' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into next/driversOlof Johansson1-3/+11
SCPI updates and fixes for v4.6 1. Minor fix to restore functionality in big-endian mode 2. Fix race by decreasing Tx timeout to 20ms 3. Adds support for 64-bit sensor values and energy meter * tag 'scpi-for-v4.6/updates' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: hwmon: (scpi) add energy meter support firmware: arm_scpi: add support for 64-bit sensor values firmware: arm_scpi: decrease Tx timeout to 20ms firmware: arm_scpi: fix send_message and sensor_get_value for big-endian Signed-off-by: Olof Johansson <olof@lixom.net>
2016-02-19hwmon: (gpio-fan) Remove un-necessary speed_index lookup for thermal hookNishanth Menon1-6/+1
Thermal hook gpio_fan_get_cur_state is only interested in knowing the current speed index that was setup in the system, this is already available as part of fan_data->speed_index which is always set by set_fan_speed. Using get_fan_speed_index is useful when we have no idea about the fan speed configuration (for example during fan_ctrl_init). When thermal framework invokes gpio_fan_get_cur_state=>get_fan_speed_index via gpio_fan_get_cur_state especially in a polled configuration for thermal governor, we basically hog the i2c interface to the extent that other functions fail to get any traffic out :(. Instead, just provide the last state set in the driver - since the gpio fan driver is responsible for the fan state immaterial of override, the fan_data->speed_index should accurately reflect the state. Fixes: b5cf88e46bad ("(gpio-fan): Add thermal control hooks") Reported-by: Tony Lindgren <tony@atomide.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Nishanth Menon <nm@ti.com> Cc: stable@vger.kernel.org Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-02-18hwmon: (ads1015) Handle negative conversion values correctlyPeter Rosin1-1/+1
Make the divisor signed as DIV_ROUND_CLOSEST is undefined for negative dividends when the divisor is unsigned. Signed-off-by: Peter Rosin <peda@axentia.se> Cc: stable@vger.kernel.org Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-02-16hwmon: (scpi) add energy meter supportSudeep Holla1-0/+8
SCPI specification v1.1 adds support for energy sensors. This patch adds support for the same. Acked-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Punit Agrawal <punit.agrawal@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2016-02-16firmware: arm_scpi: add support for 64-bit sensor valuesSudeep Holla1-3/+3
SCPI specification version 1.1 extended the sensor from 32-bit to 64-bit values in order to accommodate new sensor class with 64-bit requirements Since the SCPI driver sets the higher 32-bit for older protocol version to zeros, there's no need to explicitly check the SCPI protocol version and the backward compatibility is maintainted. Acked-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Punit Agrawal <punit.agrawal@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2016-01-27hwmon: (fam15h_power) Add bit masking for tdp_limitGioh Kim1-1/+9
Add bit masking to read ApmTdpLimit precisely Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com> Acked-by: Borislav Petkov <bp@suse.de> Acked-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-01-24hwmon: (dell-smm) Blacklist Dell Studio XPS 8000Thorsten Leemhuis1-0/+11
Since Linux 4.0 the CPU fan speed is going up and down on Dell Studio XPS 8000 and 8100 for unknown reasons. The 8100 was already blacklisted in commit a4b45b25f18d ("hwmon: (dell-smm) Blacklist Dell Studio XPS 8100"). This patch blacklists the XPS 8000. Without further debugging on the affected machine, it is not possible to find the problem. For more details see https://bugzilla.kernel.org/show_bug.cgi?id=100121 Signed-off-by: Thorsten Leemhuis <linux@leemhuis.info> Acked-by: Pali Rohár <pali.rohar@gmail.com> Cc: stable@vger.kernel.org # v4.0+, will need backport Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-01-17Merge git://www.linux-watchdog.org/linux-watchdogLinus Torvalds1-30/+1
Pull watchdog updates from Wim Van Sebroeck: "This adds following items: - watchdog restart handler support - watchdog reboot notifier support - watchdog sysfs attributes - support for the following new devices: AMD Mullins platform, AMD Carrizo platform, meson8b SoC, CSRatlas7, TS-4800, Alphascale asm9260-wdt, Zodiac, Sigma Designs SMP86xx/SMP87xx - Changes in refcounting for the watchdog core - watchdog core improvements - and small fixes" * git://www.linux-watchdog.org/linux-watchdog: (60 commits) watchdog: asm9260: remove __init and __exit annotations watchdog: Drop pointer to watchdog device from struct watchdog_device watchdog: ziirave: Use watchdog infrastructure to create sysfs attributes watchdog: Add support for creating driver specific sysfs attributes watchdog: kill unref/ref ops watchdog: stmp3xxx: Remove unused variables watchdog: add MT7621 watchdog support hwmon: (sch56xx) Drop watchdog driver data reference count callbacks watchdog: da9055_wdt: Drop reference counting watchdog: da9052_wdt: Drop reference counting watchdog: Separate and maintain variables based on variable lifetime watchdog: diag288: Stop re-using watchdog core internal flags watchdog: Create watchdog device in watchdog_dev.c watchdog: qcom-wdt: Do not set 'dev' in struct watchdog_device watchdog: mena21: Do not use device pointer from struct watchdog_device watchdog: gpio: Do not use device pointer from struct watchdog_device watchdog: tangox: Print info message using pointer to platform device watchdog: bcm2835_wdt: Drop log message if watchdog is stopped devicetree: watchdog: add binding for Sigma Designs SMP8642 watchdog watchdog: add support for Sigma Designs SMP86xx/SMP87xx ...
2016-01-09hwmon: (nct6683) Add basic support for NCT6683 on Mitac boardsGuenter Roeck1-17/+61
Mitac microcode differs from Intel microcode. One key difference is that pwm values can be written. Detect vendor from customer ID field and no longer use DMI data to identify which microcode is running on the chip. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.