aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/hwspinlock (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2018-10-26net: allow traceroute with a specified interface in a vrfMike Manning2-3/+3
Traceroute executed in a vrf succeeds if no device is given or if the vrf is given as the device, but fails if the interface is given as the device. This is for default UDP probes, it succeeds for TCP SYN or ICMP ECHO probes. As the skb bound dev is the interface and the sk dev is the vrf, sk lookup fails for ICMP_DEST_UNREACH and ICMP_TIME_EXCEEDED messages. The solution is for the secondary dev to be passed so that the interface is available for the device match to succeed, in the same way as is already done for non-error cases. Signed-off-by: Mike Manning <mmanning@vyatta.att-mail.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-26bridge: do not add port to router list when receives query with source 0.0.0.0Hangbin Liu1-1/+9
Based on RFC 4541, 2.1.1. IGMP Forwarding Rules The switch supporting IGMP snooping must maintain a list of multicast routers and the ports on which they are attached. This list can be constructed in any combination of the following ways: a) This list should be built by the snooping switch sending Multicast Router Solicitation messages as described in IGMP Multicast Router Discovery [MRDISC]. It may also snoop Multicast Router Advertisement messages sent by and to other nodes. b) The arrival port for IGMP Queries (sent by multicast routers) where the source address is not 0.0.0.0. We should not add the port to router list when receives query with source 0.0.0.0. Reported-by: Ying Xu <yinxu@redhat.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-26net/smc: fix smc_buf_unuse to use the lgr pointerKarsten Graul1-13/+12
The pointer to the link group is unset in the smc connection structure right before the call to smc_buf_unuse. Provide the lgr pointer to smc_buf_unuse explicitly. And move the call to smc_lgr_schedule_free_work to the end of smc_conn_free. Fixes: a6920d1d130c ("net/smc: handle unregistered buffers") Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-26ipv6/ndisc: Preserve IPv6 control buffer if protocol error handlers are calledStefano Brivio1-2/+1
Commit a61bbcf28a8c ("[NET]: Store skb->timestamp as offset to a base timestamp") introduces a neighbour control buffer and zeroes it out in ndisc_rcv(), as ndisc_recv_ns() uses it. Commit f2776ff04722 ("[IPV6]: Fix address/interface handling in UDP and DCCP, according to the scoping architecture.") introduces the usage of the IPv6 control buffer in protocol error handlers (e.g. inet6_iif() in present-day __udp6_lib_err()). Now, with commit b94f1c0904da ("ipv6: Use icmpv6_notify() to propagate redirect, instead of rt6_redirect()."), we call protocol error handlers from ndisc_redirect_rcv(), after the control buffer is already stolen and some parts are already zeroed out. This implies that inet6_iif() on this path will always return zero. This gives unexpected results on UDP socket lookup in __udp6_lib_err(), as we might actually need to match sockets for a given interface. Instead of always claiming the control buffer in ndisc_rcv(), do that only when needed. Fixes: b94f1c0904da ("ipv6: Use icmpv6_notify() to propagate redirect, instead of rt6_redirect().") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-25net/{ipv4,ipv6}: Do not put target net if input nsid is invalidBjørn Mork2-0/+2
The cleanup path will put the target net when netnsid is set. So we must reset netnsid if the input is invalid. Fixes: d7e38611b81e ("net/ipv4: Put target net when address dump fails due to bad attributes") Fixes: 242afaa6968c ("net/ipv6: Put target net when address dump fails due to bad attributes") Cc: David Ahern <dsahern@gmail.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-25lan743x: Remove SPI dependency from Microchip group.Bryan Whitehead1-1/+0
The SPI dependency does not apply to lan743x driver, and other drivers in the group already state their dependence on SPI. Signed-off-by: Bryan Whitehead <Bryan.Whitehead@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-25drivers: net: remove <net/busy_poll.h> inclusion when not neededEric Dumazet9-9/+0
Drivers using generic NAPI interface no longer need to include <net/busy_poll.h>, since busy polling was moved to core networking stack long ago. See commit 79e7fff47b7b ("net: remove support for per driver ndo_busy_poll()") for reference. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-25net: phy: genphy_10g_driver: Avoid NULL pointer dereferenceAndrew Lunn1-1/+1
This driver got missed during the recent change of .features from a u32 to a pointer to a Linux bitmap. Change the initialisation from 0 to PHY_10GBIT_FEATURES so removing the danger of a NULL pointer dereference. Fixes: 719655a14971 ("net: phy: Replace phy driver features u32 with link_mode bitmap") Reported-by: Jose Abreu <jose.abreu@synopsys.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-25r8169: fix broken Wake-on-LAN from S5 (poweroff)Heiner Kallweit1-2/+7
It was reported that WoL from S5 is broken (WoL from S3 works) and the analysis showed that during system shutdown the network interface was brought down already when the actual kernel shutdown started. Therefore netif_running() returned false and as a consequence the PHY was suspended. Obviously WoL wasn't working then. To fix this the original patch needs to be effectively reverted. A side effect is that when normally bringing down the interface and WoL is enabled the PHY will remain powered on (like it was before the original patch). Fixes: fe87bef01f9b ("r8169: don't check WoL when powering down PHY and interface is down") Reported-by: Neil MacLeod <neil@nmacleod.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-25octeontx2-af: Use GFP_ATOMIC under spin lockWei Yongjun1-1/+1
The function nix_update_mce_list() is called from nix_update_bcast_mce_list(), and a spin lock is held here, so we should use GFP_ATOMIC instead. Fixes: 4b05528ebf0c ("octeontx2-af: Update bcast list upon NIXLF alloc/free") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-25net: ethernet: cadence: fix socket buffer corruption problemTristram Ha1-1/+1
Socket buffer is not re-created when headroom is 2 and tailroom is 1. Signed-off-by: Tristram Ha <Tristram.Ha@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-24net/ipv6: Allow onlink routes to have a device mismatch if it is the default routeDavid Ahern2-7/+9
The intent of ip6_route_check_nh_onlink is to make sure the gateway given for an onlink route is not actually on a connected route for a different interface (e.g., 2001:db8:1::/64 is on dev eth1 and then an onlink route has a via 2001:db8:1::1 dev eth2). If the gateway lookup hits the default route then it most likely will be a different interface than the onlink route which is ok. Update ip6_route_check_nh_onlink to disregard the device mismatch if the gateway lookup hits the default route. Turns out the existing onlink tests are passing because there is no default route or it is an unreachable default, so update the onlink tests to have a default route other than unreachable. Fixes: fc1e64e1092f6 ("net/ipv6: Add support for onlink flag") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-24net: sched: Remove TCA_OPTIONS from policyDavid Ahern1-1/+0
Marco reported an error with hfsc: root@Calimero:~# tc qdisc add dev eth0 root handle 1:0 hfsc default 1 Error: Attribute failed policy validation. Apparently a few implementations pass TCA_OPTIONS as a binary instead of nested attribute, so drop TCA_OPTIONS from the policy. Fixes: 8b4c3cdd9dd8 ("net: sched: Add policy validation for tc attributes") Reported-by: Marco Berizzi <pupilla@libero.it> Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-24ice: Poll for link status changeAnirudh Venkataramanan3-120/+25
When the physical link goes up or down, the driver is supposed to receive a link status event (LSE). The driver currently has the code to handle LSEs but there is no firmware support for this feature yet. So this patch adds the ability for the driver to poll for link status changes. The polling itself is done in ice_watchdog_subtask. For namespace cleanliness, this patch also removes code that handles LSE. This code will be reintroduced once the feature is officially supported. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-10-24ice: Allocate VF interrupts and set queue mapAnirudh Venkataramanan2-4/+17
Allocate VF interrupts using VPINT_ALLOC_PCI. Multiple interrupts are specified as a range from "first" to "last". Also, according to the spec, the queue mapping for a VF needs to be set in both contig and scatter queue modes. So make this change as well. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-10-24ice: Introduce ice_dev_onetime_setupAnirudh Venkataramanan4-0/+25
ice_dev_onetime_setup contains a couple of driver workarounds for current firmware limitations. These workarounds are expected to go away once these limitations are fixed in the firmware. On a firmware release that has these issues addressed, these workarounds (while unnecessary) will not break anything. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-10-24net: hns3: Fix for warning uninitialized symbol hw_err_lst3Shiju Jose1-4/+6
This patch fixes the smatch warning, drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_err.c:700 hclge_log_and_clear_ppp_error() error: uninitialized symbol 'hw_err_lst3' Link: https://lkml.org/lkml/2018/10/23/430 Fixes: da2d072a9ea7 ("net: hns3: Add enable and process hw errors from PPP") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Shiju Jose <shiju.jose@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-24octeontx2-af: Copy the right amount of memoryDan Carpenter1-1/+1
This is a copy and paste bug where we copied the sizeof() from the chunk before. We're copying more data than intended but the destination is a union so it doesn't cause memory corruption. Fixes: ffb0abd7e9cb ("octeontx2-af: NIX AQ instruction enqueue support") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-24net: udp: fix handling of CHECKSUM_COMPLETE packetsSean Tranchetti3-6/+39
Current handling of CHECKSUM_COMPLETE packets by the UDP stack is incorrect for any packet that has an incorrect checksum value. udp4/6_csum_init() will both make a call to __skb_checksum_validate_complete() to initialize/validate the csum field when receiving a CHECKSUM_COMPLETE packet. When this packet fails validation, skb->csum will be overwritten with the pseudoheader checksum so the packet can be fully validated by software, but the skb->ip_summed value will be left as CHECKSUM_COMPLETE so that way the stack can later warn the user about their hardware spewing bad checksums. Unfortunately, leaving the SKB in this state can cause problems later on in the checksum calculation. Since the the packet is still marked as CHECKSUM_COMPLETE, udp_csum_pull_header() will SUBTRACT the checksum of the UDP header from skb->csum instead of adding it, leaving us with a garbage value in that field. Once we try to copy the packet to userspace in the udp4/6_recvmsg(), we'll make a call to skb_copy_and_csum_datagram_msg() to checksum the packet data and add it in the garbage skb->csum value to perform our final validation check. Since the value we're validating is not the proper checksum, it's possible that the folded value could come out to 0, causing us not to drop the packet. Instead, we believe that the packet was checksummed incorrectly by hardware since skb->ip_summed is still CHECKSUM_COMPLETE, and we attempt to warn the user with netdev_rx_csum_fault(skb->dev); Unfortunately, since this is the UDP path, skb->dev has been overwritten by skb->dev_scratch and is no longer a valid pointer, so we end up reading invalid memory. This patch addresses this problem in two ways: 1) Do not use the dev pointer when calling netdev_rx_csum_fault() from skb_copy_and_csum_datagram_msg(). Since this gets called from the UDP path where skb->dev has been overwritten, we have no way of knowing if the pointer is still valid. Also for the sake of consistency with the other uses of netdev_rx_csum_fault(), don't attempt to call it if the packet was checksummed by software. 2) Add better CHECKSUM_COMPLETE handling to udp4/6_csum_init(). If we receive a packet that's CHECKSUM_COMPLETE that fails verification (i.e. skb->csum_valid == 0), check who performed the calculation. It's possible that the checksum was done in software by the network stack earlier (such as Netfilter's CONNTRACK module), and if that says the checksum is bad, we can drop the packet immediately instead of waiting until we try and copy it to userspace. Otherwise, we need to mark the SKB as CHECKSUM_NONE, since the skb->csum field no longer contains the full packet checksum after the call to __skb_checksum_validate_complete(). Fixes: e6afc8ace6dd ("udp: remove headers from UDP packets before queueing") Fixes: c84d949057ca ("udp: copy skb->truesize in the first cache line") Cc: Sam Kumar <samanthakumar@google.com> Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: Sean Tranchetti <stranche@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-24net: rtnl_dump_all needs to propagate error from dumpit functionDavid Ahern1-2/+4
If an address, route or netconf dump request is sent for AF_UNSPEC, then rtnl_dump_all is used to do the dump across all address families. If one of the dumpit functions fails (e.g., invalid attributes in the dump request) then rtnl_dump_all needs to propagate that error so the user gets an appropriate response instead of just getting no data. Fixes: effe67926624 ("net: Enable kernel side filtering of route dumps") Fixes: 5fcd266a9f64 ("net/ipv4: Add support for dumping addresses for a specific device") Fixes: 6371a71f3a3b ("net/ipv6: Add support for dumping addresses for a specific device") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-24net: Don't return invalid table id error when dumping all familiesDavid Ahern5-0/+14
When doing a route dump across all address families, do not error out if the table does not exist. This allows a route dump for AF_UNSPEC with a table id that may only exist for some of the families. Do return the table does not exist error if dumping routes for a specific family and the table does not exist. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-24net/ipv6: Put target net when address dump fails due to bad attributesDavid Ahern1-6/+8
If tgt_net is set based on IFA_TARGET_NETNSID attribute in the dump request, make sure all error paths call put_net. Fixes: 6371a71f3a3b ("net/ipv6: Add support for dumping addresses for a specific device") Fixes: ed6eff11790a ("net/ipv6: Update inet6_dump_addr for strict data checking") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-24net/ipv4: Put target net when address dump fails due to bad attributesDavid Ahern1-5/+8
If tgt_net is set based on IFA_TARGET_NETNSID attribute in the dump request, make sure all error paths call put_net. Fixes: 5fcd266a9f64 ("net/ipv4: Add support for dumping addresses for a specific device") Fixes: c33078e3dfb1 ("net/ipv4: Update inet_dump_ifaddr for strict data checking") Reported-by: Li RongQing <lirongqing@baidu.com> Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-24ice: Use capability count returned by the firmwareAnirudh Venkataramanan1-3/+1
The firmware now returns the capability count in the command buffer. Use it. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-10-24ice: Update expected FW versionAnirudh Venkataramanan1-3/+2
Update to the current firmware major and minor version which are 1 and 3 respectively. Also remove an empty comment line. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-10-24ice: Change device ID define names to align with branding stringAnirudh Venkataramanan2-6/+6
Basically remove references to C810 and use E810C (from the branding string) instead. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-10-24ice: Make ice_msix_clean_rings staticAnirudh Venkataramanan2-2/+1
commit 158a08a694c4e ("ice: remove ndo_poll_controller") removed ice_netpoll and introduced a namespace warning for ice_msix_clean_rings. Fix the namespace warning by making ice_msix_clean_rings static. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-10-24net/kconfig: Make QCOM_QMI_HELPERS available when COMPILE_TESTLinus Torvalds1-1/+1
The networking merge brought in the experimental support for the Qualcomm ath10k system NOC, which selects QCOM_QMI_HELPERS as a dependency. But the ATH10K_SNOC option (which selects QCOM_QMI_HELPERS) depends on ARCH_QCOM || COMPILE_TEST in order to get wider build testing than just the unusual QCOM architecture build, while the QCOM_QMI_HELPERS option doesn't have that COMPILE_TEST option and is limited to only ARCH_QCOM. As a result, a "make allmodconfig" complains WARNING: unmet direct dependencies detected for QCOM_QMI_HELPERS Depends on [n]: ARCH_QCOM && NET [=y] Selected by [m]: - ATH10K_SNOC [=m] && NETDEVICES [=y] && WLAN [=y] && WLAN_VENDOR_ATH [=y] && ATH10K [=m] && (ARCH_QCOM || COMPILE_TEST [=y]) Fix the config-time warning by making QCOM_QMI_HELPERS available when COMPILE_TEST, since the result seems to build fine. Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Govind Singh <govinds@codeaurora.org> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: David Miller <davem@davemloft.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-23tcp: add tcp_reset_xmit_timer() helperEric Dumazet3-15/+41
With EDT model, SRTT no longer is inflated by pacing delays. This means that RTO and some other xmit timers might be setup incorrectly. This is particularly visible with either : - Very small enforced pacing rates (SO_MAX_PACING_RATE) - Reduced rto (from the default 200 ms) This can lead to TCP flows aborts in the worst case, or spurious retransmits in other cases. For example, this session gets far more throughput than the requested 80kbit : $ netperf -H 127.0.0.2 -l 100 -- -q 10000 MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 127.0.0.2 () port 0 AF_INET Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 540000 262144 262144 104.00 2.66 With the fix : $ netperf -H 127.0.0.2 -l 100 -- -q 10000 MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 127.0.0.2 () port 0 AF_INET Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 540000 262144 262144 104.00 0.12 EDT allows for better control of rtx timers, since TCP has a better idea of the earliest departure time of each skb in the rtx queue. We only have to eventually add to the timer the difference of the EDT time with current time. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-23qed: Fix static checker warningRahul Verma1-3/+3
Static Checker Warnings: drivers/net/ethernet/qlogic/qed/qed_main.c:1510 qed_fill_link_capability() error: uninitialized symbol 'tcvr_state'. drivers/net/ethernet/qlogic/qed/qed_mcp.c:1951 qed_mcp_trans_speed_mask() error: uninitialized symbol 'transceiver_state'. drivers/net/ethernet/qlogic/qed/qed_mcp.c:1951 qed_mcp_trans_speed_mask() error: uninitialized symbol 'transceiver_type'. Symbols tcvr_state, transceiver_state and transceiver_type are initialized with respective default state. Fixes: c56a8be7e7aa ("qed: Add supported link and advertise link to display in ethtool.") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Rahul Verma <Rahul.Verma@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-23Revert "be2net: remove desc field from be_eq_obj"Ivan Vecera2-4/+3
The mentioned commit needs to be reverted because we cannot pass string allocated on stack to request_irq(). This function stores uses this pointer for later use (e.g. /proc/interrupts) so we need to keep this string persistently. Fixes: d6d9704af8f4 ("be2net: remove desc field from be_eq_obj") Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-23Revert "net: simplify sock_poll_wait"Karsten Graul13-16/+22
This reverts commit dd979b4df817e9976f18fb6f9d134d6bc4a3c317. This broke tcp_poll for SMC fallback: An AF_SMC socket establishes an internal TCP socket for the initial handshake with the remote peer. Whenever the SMC connection can not be established this TCP socket is used as a fallback. All socket operations on the SMC socket are then forwarded to the TCP socket. In case of poll, the file->private_data pointer references the SMC socket because the TCP socket has no file assigned. This causes tcp_poll to wait on the wrong socket. Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-23net: socionext: Reset tx queue in ndo_stopMasahisa Kojima1-0/+3
We observed that packets and bytes count are not reset when user performs interface down. Eventually, tx queue is exhausted and packets will not be sent out. To avoid this problem, resets tx queue in ndo_stop. Fixes: 533dd11a12f6 ("net: socionext: Add Synquacer NetSec driver") Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org> Signed-off-by: Yoshitoyo Osaki <osaki.yoshitoyo@socionext.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-23net: socionext: Add dummy PHY register read in phy_write()Masahisa Kojima1-2/+16
There is a compatibility issue between RTL8211E implemented in Developerbox and netsec ethernet controller IP. Our MDIO controller stops MDC clock right after the write access, but RTL8211E expects MDC clock must be kept toggling for several clock cycle with MDIO high before entering the IDLE state. Without keeping clock after write access, write access is not correctly handled and register is not updated. To meet this requirement, netsec driver needs to issue dummy read(e.g. read PHYID1(offset 0x2) register) right after write access, to keep MDC clock. We think this compatibility issue is a problem specific to our MDIO controller and RTL8211E. Fixes: 533dd11a12f6 ("net: socionext: Add Synquacer NetSec driver") Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org> Signed-off-by: Yoshitoyo Osaki <osaki.yoshitoyo@socionext.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-23net: socionext: Stop PHY before resetting netsecMasahisa Kojima1-4/+15
In ndo_stop, driver resets the netsec ethernet controller IP. When the netsec IP is reset, HW running mode turns to NRM mode and driver has to wait until this mode transition completes. But mode transition to NRM will not complete if the PHY is in normal operation state. Netsec IP requires PHY is in power down state when it is reset. This modification stops the PHY before resetting netsec. Together with this modification, phy_addr is stored in netsec_priv structure because ndev->phydev is not yet ready in ndo_init. Fixes: 533dd11a12f6 ("net: socionext: Add Synquacer NetSec driver") Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org> Signed-off-by: Yoshitoyo Osaki <osaki.yoshitoyo@socionext.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-22net: stmmac: Set OWN bit for jumbo framesThor Thayer1-2/+2
Ping with Jumbo packet does not reply and get a watchdog timeout [ 46.059616] ------------[ cut here ]------------ [ 46.064268] NETDEV WATCHDOG: eth0 (socfpga-dwmac): transmit queue 0 timed out [ 46.071471] WARNING: CPU: 1 PID: 0 at net/sched/sch_generic.c:461 dev_watchdog+0x2cc/0x2d8 [ 46.079708] Modules linked in: [ 46.082761] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.18.0-00115-gc262be665854-dirty #264 [ 46.091082] Hardware name: SoCFPGA Stratix 10 SoCDK (DT) [ 46.096377] pstate: 20000005 (nzCv daif -PAN -UAO) [ 46.101152] pc : dev_watchdog+0x2cc/0x2d8 [ 46.105149] lr : dev_watchdog+0x2cc/0x2d8 [ 46.109144] sp : ffff00000800bd80 [ 46.112447] x29: ffff00000800bd80 x28: ffff80007a9b4940 [ 46.117744] x27: 00000000ffffffff x26: ffff80007aa183b0 [ 46.123040] x25: 0000000000000001 x24: 0000000000000140 [ 46.128336] x23: ffff80007aa1839c x22: ffff80007aa17fb0 [ 46.133632] x21: ffff80007aa18000 x20: ffff0000091a7000 [ 46.138927] x19: 0000000000000000 x18: ffffffffffffffff [ 46.144223] x17: 0000000000000000 x16: 0000000000000000 [ 46.149519] x15: ffff0000091a96c8 x14: 07740775076f0720 [ 46.154814] x13: 07640765076d0769 x12: 0774072007300720 [ 46.160110] x11: 0765077507650775 x10: 0771072007740769 [ 46.165406] x9 : 076d0773076e0761 x8 : 077207740720073a [ 46.170702] x7 : 072907630761076d x6 : ffff80007ff9a0c0 [ 46.175997] x5 : ffff80007ff9a0c0 x4 : 0000000000000002 [ 46.181293] x3 : 0000000000000000 x2 : ffff0000091ac180 [ 46.186589] x1 : e6a742ebe628e800 x0 : 0000000000000000 [ 46.191885] Call trace: [ 46.194326] dev_watchdog+0x2cc/0x2d8 [ 46.197980] call_timer_fn+0x20/0x78 [ 46.201544] expire_timers+0xa4/0xb0 [ 46.205108] run_timer_softirq+0xe4/0x198 [ 46.209107] __do_softirq+0x114/0x210 [ 46.212760] irq_exit+0xd0/0xd8 [ 46.215895] __handle_domain_irq+0x60/0xb0 [ 46.219977] gic_handle_irq+0x58/0xa8 [ 46.223628] el1_irq+0xb0/0x128 [ 46.226761] arch_cpu_idle+0x10/0x18 [ 46.230326] do_idle+0x1d4/0x288 [ 46.233544] cpu_startup_entry+0x24/0x28 [ 46.237457] secondary_start_kernel+0x17c/0x1c0 [ 46.241971] ---[ end trace 57048cd1372cd828 ]--- Inspection of queue showed Jumbo packets were not sent out. The ring Jumbo packet function needs to set the OWN bit so the packet is sent. Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-22arm64: dts: stratix10: Support Ethernet Jumbo frameThor Thayer2-1/+7
Properly specify the RX and TX FIFO size which is important for Jumbo frames. Update the max-frame-size to support Jumbo frames. Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-22tls: Add maintainersDave Watson1-0/+2
Add John and Daniel as additional tls co-maintainers to help review patches and fix syzbot reports. Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Dave Watson <davejwatson@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-22net: ethernet: ti: cpsw: unsync mcast entries while switch promisc modeIvan Khoronzhuk1-0/+1
After flushing all mcast entries from the table, the ones contained in mc list of ndev are not restored when promisc mode is toggled off, because they are considered as synched with ALE, thus, in order to restore them after promisc mode - reset syncing info. This fix touches only switch mode devices, including single port boards like Beagle Bone. Fixes: commit 5da1948969bc ("net: ethernet: ti: cpsw: fix lost of mcast packets while rx_mode update") Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-22octeontx2-af: Support for NIXLF's UCAST/PROMISC/ALLMULTI modesSunil Goutham4-1/+105
By default NIXLF is set in UCAST mode. This patch adds a new mailbox message which when sent by a RVU PF changes this default mode. When promiscuous mode is needed, the reserved promisc entry for each of RVU PF is setup to match against ingress channel number only, so that all pkts on that channel are accepted and forwarded to the mode change requesting PF_FUNC's NIXLF. PROMISC and ALLMULTI modes are supported only for PFs, for VFs only UCAST mode is supported. Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-22octeontx2-af: Support for setting MAC addressSunil Goutham3-1/+35
Added a new mailbox message for a PF/VF to set/update it's NIXLF's MAC address. Also updates unicast NPC MCAM entry with this address as matching DMAC. Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-22octeontx2-af: Support for changing RSS algorithmSunil Goutham4-1/+108
This patch adds support for a RVU PF/VF to change NIX Rx flowkey algorithm index in NPC RX RSS_ACTION. eg: a ethtool command changing RSS algorithm for a netdev interface would trigger this change in NPC. If PF/VF doesn't specify any MCAM entry index then default UCAST entry of the NIXLF attached to PF/VF will be updated with RSS_ACTION and flowkey index. Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-22octeontx2-af: NIX Rx flowkey configuration for RSSSunil Goutham3-0/+187
Configure NIX RX flowkey algorithm configuration to support RSS (receive side scaling). Currently support for only L3/L4 2-tuple and 4-tuple hash of IPv4/v6/TCP/UDP/SCTP is added. HW supports upto 32 different flowkey algorithms which SW can define, this patch defines 9. NPC RX ACTION has to point to one of these flowkey indices for RSS to work. The configuration is dependent on NPC parse result's layer info. So if NPC KPU profile changes suchthat LID/LTYPE values of above said protocols change then this configuration will most likely be effected. Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-22octeontx2-af: Install ucast and bcast pkt forwarding rulesSunil Goutham4-0/+375
Upon NIXLF_ALLOC install a unicast forwarding rule in NPC MCAM like below - Match pkt DMAC with NIXLF attached PF/VF's MAC address. - Ingress channel - Action is UCAST - Forward to PF_FUNC of this NIXLF And broadcast pkt forwarding rule as - Match L2B bit in MCAM search key - Ingress channel - Action is UCAST, for now, later it will be changed to MCAST. Only PFs can install this rule Upon NIXLF_FREE disable all MCAM entries in use by that NIXLF. Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-22octeontx2-af: Add LMAC channel info to NIXLF_ALLOC responseStanislaw Kardach4-0/+18
Add LMAC channel info like Rx/Tx channel base and count to NIXLF_ALLOC mailbox message response. This info is used by NIXLF attached RVU PF/VF to configure SQ's default channel, TL3_TL2_LINKX_CFG and to install MCAM rules in NPC based on matching ingress channel number. Signed-off-by: Stanislaw Kardach <skardach@marvell.com> Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-22octeontx2-af: NPC MCAM and LDATA extract minimal configurationSunil Goutham4-0/+181
This patch adds some minimal configuration for NPC MCAM and LDATA extraction which is sufficient enough to install ucast/bcast/promiscuous forwarding rules. Below is the config done - LDATA extraction config to extract DMAC from pkt to offset 64bit in MCAM search key. - Set MCAM lookup keysize to 224bits - Set MCAM TX miss action to UCAST_DEFAULT - Set MCAM RX miss action to DROP Also inorder to have guaranteed space in MCAM to install ucast forwarding rule for each of RVU PF/VF, reserved one MCAM entry for each of NIXLF for ucast rule. And two entries for each of RVU PF. One for bcast pkt replication and other for promiscuous mode which allows all pkts received on a HW CGX/LBK channel. Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-22octeontx2-af: Enable packet length and csum validationSunil Goutham2-0/+28
Config NPC layer info from KPU profile into protocol checker to identify outer L2/IPv4/TCP/UDP headers in a packet. And enable IPv4 checksum validation. L3/L4 and L4 CSUM validation will be enabled by PF/VF drivers by configuring NIX_AF_LF(0..127)_RX_CFG via mbox i.e 'nix_lf_alloc_req->rx_cfg' Also enable setting of NPC_RESULT_S[L2B] when an outer L2 broadcast address is detected. This will help in installing NPC MCAM rules for broadcast packets. Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-22octeontx2-af: Support for VTAG strip and captureVamsi Attunuru4-1/+101
Added support for PF/VF drivers to configure NIX to capture and/or strip VLAN tag from ingress packets. Signed-off-by: Vamsi Attunuru <vamsi.attunuru@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-22octeontx2-af: Update bcast list upon NIXLF alloc/freeSunil Goutham1-0/+133
Upon NIXLF ALLOC/FREE, add or remove corresponding PF_FUNC from the broadcast packet replication list of the CGX LMAC mapped RVU PF. Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-22octeontx2-af: Broadcast packet replication supportSunil Goutham2-0/+220
Allocate memory for mcast/bcast/mirror replication entry contexts, replication buffers (used by HW) and config HW with corresponding memory bases. Added support for installing MCEs via NIX AQ mbox. For now support is restricted to broadcast pkt replication, hence MCE table size and number of replication buffers allocated are less. Each CGX LMAC mapped RVU PF is assigned a MCE table of size 'num VFs of that PF + PF'. Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.