aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/hwtracing/coresight/coresight-etm4x.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-04-25coresight: etm4x: Configure tracers to emit timestampsMathieu Poirier1-1/+101
Configure timestamps to be emitted at regular intervals in the trace stream to temporally correlate instructions executed on different CPUs. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Tested-by: Leo Yan <leo.yan@linaro.org> Tested-by: Robert Walker <robert.walker@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-25coresight: etm4x: Skip selector pair 0Mathieu Poirier1-2/+5
Resource selector pair 0 is always implemented and reserved. As such it should not be explicitly programmed. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Tested-by: Leo Yan <leo.yan@linaro.org> Tested-by: Robert Walker <robert.walker@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-25coresight: etm4x: Add kernel configuration for CONTEXTIDMathieu Poirier1-0/+5
Set the proper bit in the configuration register when contextID tracing has been requested by user space. That way PE_CONTEXT elements are generated by the tracers when a process is installed on a CPU. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Tested-by: Leo Yan <leo.yan@linaro.org> Tested-by: Robert Walker <robert.walker@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-15Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds1-9/+12
Pull ARM updates from Russell King: - An improvement from Ard Biesheuvel, who noted that the identity map setup was taking a long time due to flush_cache_louis(). - Update a comment about dma_ops from Wolfram Sang. - Remove use of "-p" with ld, where this flag has been a no-op since 2004. - Remove the printing of the virtual memory layout, which is no longer useful since we hide pointers. - Correct SCU help text. - Remove legacy TWD registration method. - Add pgprot_device() implementation for mapping PCI sysfs resource files. - Initialise PFN limits earlier for kmemleak. - Fix argument count to match macro definition (affects clang builds) - Use unified assembler language almost everywhere for clang, and other clang improvements (from Stefan Agner, Nathan Chancellor). - Support security extension for noMMU and other noMMU cleanups (from Vladimir Murzin). - Remove unnecessary SMP bringup code (which was incorrectly copy'n' pasted from the ARM platform implementations) and remove it from the arch code to discourge further copys of it appearing. - Add Cortex A9 erratum preventing kexec working on some SoCs. - AMBA bus identification updates from Mike Leach. - More use of raw spinlocks to avoid -RT kernel issues (from Yang Shi and Sebastian Andrzej Siewior). - MCPM hyp/svc mode mismatch fixes from Marek Szyprowski. * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (32 commits) ARM: 8849/1: NOMMU: Fix encodings for PMSAv8's PRBAR4/PRLAR4 ARM: 8848/1: virt: Align GIC version check with arm64 counterpart ARM: 8847/1: pm: fix HYP/SVC mode mismatch when MCPM is used ARM: 8845/1: use unified assembler in c files ARM: 8844/1: use unified assembler in assembly files ARM: 8843/1: use unified assembler in headers ARM: 8841/1: use unified assembler in macros ARM: 8840/1: use a raw_spinlock_t in unwind ARM: 8839/1: kprobe: make patch_lock a raw_spinlock_t ARM: 8837/1: coresight: etmv4: Update ID register table to add UCI support ARM: 8836/1: drivers: amba: Update component matching to use the CoreSight UCI values. ARM: 8838/1: drivers: amba: Updates to component identification for driver matching. ARM: 8833/1: Ensure that NEON code always compiles with Clang ARM: avoid Cortex-A9 livelock on tight dmb loops ARM: smp: remove arch-provided "pen_release" ARM: actions: remove boot_lock and pen_release ARM: oxnas: remove CPU hotplug implementation ARM: qcom: remove unnecessary boot_lock ARM: 8832/1: NOMMU: Limit visibility for CONFIG_FLASH_{MEM_BASE,SIZE} ARM: 8831/1: NOMMU: pmsa-v8: remove unneeded semicolon ...
2019-02-26coresight: etm4x: Add support to enable ETMv4.2Sai Prakash Ranjan1-1/+2
SDM845 has ETMv4.2 and can use the existing etm4x driver. But the current etm driver checks only for ETMv4.0 and errors out for other etm4x versions. This patch adds this missing support to enable SoC's with ETMv4x to use same driver by checking only the ETM architecture major version number. Without this change, we get below error during etm probe: / # dmesg | grep etm [ 6.660093] coresight-etm4x: probe of 7040000.etm failed with error -22 [ 6.666902] coresight-etm4x: probe of 7140000.etm failed with error -22 [ 6.673708] coresight-etm4x: probe of 7240000.etm failed with error -22 [ 6.680511] coresight-etm4x: probe of 7340000.etm failed with error -22 [ 6.687313] coresight-etm4x: probe of 7440000.etm failed with error -22 [ 6.694113] coresight-etm4x: probe of 7540000.etm failed with error -22 [ 6.700914] coresight-etm4x: probe of 7640000.etm failed with error -22 [ 6.707717] coresight-etm4x: probe of 7740000.etm failed with error -22 With this change, etm probe is successful: / # dmesg | grep etm [ 6.659198] coresight-etm4x 7040000.etm: CPU0: ETM v4.2 initialized [ 6.665848] coresight-etm4x 7140000.etm: CPU1: ETM v4.2 initialized [ 6.672493] coresight-etm4x 7240000.etm: CPU2: ETM v4.2 initialized [ 6.679129] coresight-etm4x 7340000.etm: CPU3: ETM v4.2 initialized [ 6.685770] coresight-etm4x 7440000.etm: CPU4: ETM v4.2 initialized [ 6.692403] coresight-etm4x 7540000.etm: CPU5: ETM v4.2 initialized [ 6.699024] coresight-etm4x 7640000.etm: CPU6: ETM v4.2 initialized [ 6.705646] coresight-etm4x 7740000.etm: CPU7: ETM v4.2 initialized Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-26ARM: 8837/1: coresight: etmv4: Update ID register table to add UCI supportMike Leach1-9/+12
Adds macro to enable UCI entries to be added to AMBA ID tables. Updates the ID register tables to contain a UCI entry for the A35 ETM device to allow correct matching of driver in the amba bus code. Signed-off-by: Mike Leach <mike.leach@linaro.org> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Tested-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2018-09-25coresight: etmx: Claim devices before useSuzuki K Poulose1-3/+11
Use the CLAIM tags to grab the device for self-hosted usage. Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-25coresight: etm4x: Add support for handling errorsSuzuki K Poulose1-13/+26
Add support for handling errors in enabling the component. The ETM is enabled via cross call to owner CPU. Make necessary changes to report the error back from the cross call. Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-25coresight: etm4x: Configure EL2 exception level when kernel is running in HYPTomasz Nowicki1-20/+20
For non-VHE systems host kernel runs at EL1 and jumps to EL2 whenever hypervisor code should be executed. In this case ETM4x driver must restrict configuration to EL1 when it setups kernel tracing. However, there is no separate hypervisor privilege level when VHE is enabled, the host kernel runs at EL2. This patch fixes configuration of TRCACATRn register for VHE systems so that ETM_EXLEVEL_NS_HYP bit is used instead of ETM_EXLEVEL_NS_OS to on/off kernel tracing. At the same time, it moves common code to new helper. Signed-off-by: Tomasz Nowicki <tnowicki@caviumnetworks.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-25coresight: Convert driver messages to dev_dbgSuzuki K Poulose1-2/+2
Convert component enable/disable messages from dev_info to dev_dbg. When used with perf, the components in the paths are enabled/disabled during each schedule of the run, which can flood the dmesg with these messages. Moreover, they are only useful for debug purposes. So, convert such messages to dev_dbg() which can be turned on as needed. Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-15coresight: ETM: Add support for Arm Cortex-A73 and Cortex-A35Suzuki K Poulose1-17/+14
Add ETM PIDs of the Arm cortex-A CPUs to the white list of ETMs. While at it add a helper macro to make it easier to add the new entries. Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-14coresight: Moving framework and drivers to SPDX identifierMathieu Poirier1-10/+3
Moving all kernel side CoreSight framework and drivers to SPDX identifier. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28coresight: etm4x: constify amba_idArvind Yadav1-1/+1
amba_id are not supposed to change at runtime. All functions working with const amba_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28coresight: etm4x: Adds trace return stack option programming for ETMv4.Mike Leach1-0/+4
Adds handling to program the return stack option into ETMv4 hardware if specified in the perf command line. If option is not supported by the hardware then it will be ignored. This allows capture to move between core/ETM combinations that have the hardware support to those that do not. Signed-off-by: Mike Leach <mike.leach@linaro.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-26hwtracing/coresight-etm4x: Use cpuhp_setup_state_nocalls_cpuslocked()Sebastian Andrzej Siewior1-10/+10
etm_probe4() holds get_online_cpus() while invoking cpuhp_setup_state_nocalls(). cpuhp_setup_state_nocalls() invokes get_online_cpus() as well. This is correct, but prevents the conversion of the hotplug locking to a percpu rwsem. Use cpuhp_setup_state_nocalls_cpuslocked() to avoid the nested call. Convert *_online_cpus() to the new interfaces while at it. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/20170524081547.983493849@linutronix.de
2017-01-25coresight: etm4x: Fix timestamp configuration when working from perfMathieu Poirier1-1/+2
When using the ETM4x tracers from the perf interface two trace options are available: cycle accurate and timestamp. Enabling the timestamp feature is done by setting TRCCONFIGR.TS (bit 11). The position of the timestamp bit in that register coincidentally happens to be the same as what was chosen to enable timestamping from the 'mode' sysFS entry. The code does the right thing but the semantic is wrong. This patch sets TRCCONFIGR.TS explicitly, as it is done from the sysFS interface. That way timestamps are set the same way from both perf and sysFS and there is no misunderstanding as to what is intended. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-25coresight: etm4x: Fix enabling of cycle accurate tracing in perf.Mike Leach1-2/+5
Using perf record 'cyclacc' option in cs_etm event was not setting up cycle accurate trace correctly. Corrects bit set in TRCCONFIGR to enable cycle accurate trace. Programs TRCCCCTLR with a valid threshold value as required by ETMv4 spec. Signed-off-by: Mike Leach <mike.leach@linaro.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-25coresight/etm3/4x: Consolidate hotplug state spaceThomas Gleixner1-2/+2
Even if both drivers are compiled in only one instance can run on a given system depending on the available tracer cell. So having seperate hotplug states for them is pointless. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Link: http://lkml.kernel.org/r/20161221192112.162765484@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-12-25cpu/hotplug: Cleanup state namesThomas Gleixner1-2/+2
When the state names got added a script was used to add the extra argument to the calls. The script basically converted the state constant to a string, but the cleanup to convert these strings into meaningful ones did not happen. Replace all the useless strings with 'subsys/xxx/yyy:state' strings which are used in all the other places already. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Siewior <bigeasy@linutronix.de> Link: http://lkml.kernel.org/r/20161221192112.085444152@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-08-31coresight: etm4x: adding configurable start/stop filteringMathieu Poirier1-0/+71
With this patch we add start/stop filtering as specified on the perf cmd line. When the IP matches the start address trace generation gets triggered. The stop condition is achieved when the IP matches the stop address. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-31coresight: etm4x: adding configurable address range filteringMathieu Poirier1-9/+119
This patch adds the capability to specify address ranges from the perf cmd line using the --filter option. If the IP falls within the range(s) program flow traces are generated. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-31coresight: etm4x: configuring include/exclude functionMathieu Poirier1-10/+25
The include/exclude function of a tracer is applicable to address range and start/stop filters. To avoid duplication and reuse code moving the include/exclude configuration to a function of its own. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-31coresight: etm4x: adding range filter configuration functionMathieu Poirier1-18/+38
Introducing a new function to do address range configuration generic enough to work for any address range and any comparator. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-31coresight: etm4x: cleaning up default filter configurationMathieu Poirier1-26/+27
The default filter configuration was hard to read and included some redundancy. This patch attempts to stream line configuration and improve readability. No change of functionality is included. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-31coresight: etm4x: split default and filter configurationMathieu Poirier1-14/+22
Splitting the steps involved in the configuration of a tracer. The first part is generic and can be reused for both sysFS and Perf methods. The second part pertains to the configuration of filters themselves where the source of the information used to configure the filters will vary depending on the access methods. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-31coresight: etm-perf: pass struct perf_event to source::enable/disable()Mathieu Poirier1-8/+11
With this commit [1] address range filter information is now found in the struct hw_perf_event::addr_filters. As such pass the event itself to the coresight_source::enable/disable() functions so that both event attribute and filter can be accessible for configuration. [1] 'commit 375637bc5249 ("perf/core: Introduce address range filtering")' Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-31coresight: etm4x: request to retain power to the trace unit when activeSudeep Holla1-0/+12
The Coresight ETMv4 architecture provides a way to request to keep the power to the trace unit. This might help to collect the traces without the need to disable the CPU power management(entering/exiting deeper idle states). Trace PowerDown Control Register provides powerup request bit which when set requests the system to retain power to the trace unit and emulate the powerdown request. Typically, a trace unit drives a signal to the power controller to request that the trace unit core power domain is powered up. However, if the trace unit and the CPU are in the same power domain then the implementation might combine the trace unit power up status with a signal from the CPU. This patch requests to retain power to the trace unit when active and to remove when inactive. Note this change will only request but the behaviour depends on the implementation. However, it matches the exact behaviour expected when the external debugger is connected with respect to CPU power states. Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-31coresight: etm4x: remove duplicated include from coresight-etm4x.cWei Yongjun1-1/+0
Remove duplicated include. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-31coresight: Use local coresight_desc instancesSuzuki K Poulose1-12/+8
Each coresight device prepares a description for coresight_register() in struct coresight_desc. Once we register the device, the description is useless and can be freed. The coresight_desc is small enough (48bytes on 64bit)i to be allocated on the stack. Hence use an automatic variable to avoid a needless dynamic allocation and wasting the memory(which will only be free'd when the device is destroyed). Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Pratik Patel <pratikp@codeaurora.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-31coresight: Add better messages for coresight_timeoutSuzuki K Poulose1-4/+2
When we encounter a timeout waiting for a status change via coresight_timeout, the caller always print the offset which was tried. This is pretty much useless as it doesn't specify the bit position we wait for. Also, one needs to lookup the TRM to figure out, what was wrong. This patch changes all such error messages to print something more meaningful. Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-31coresight: etmv4: Fix ETMv4x peripheral ID tableSuzuki K Poulose1-4/+4
This patch cleans up the peripheral id table for different ETMv4 implementations. As per Cortex-A53 TRM, the ETM has following id values: Peripheral ID0 0x5D 0xFE0 Peripheral ID1 0xB9 0xFE4 Peripheral ID2 0x4B 0xFE8 Peripheral ID3 0x00 0xFEC where, PID2: has the following format: [7:4] Revision [3] JEDEC 0b1 res1. Indicates a JEP106 identity code is used [2:0] DES_1 0b011 ARM Limited. This is bits[6:4] of JEP106 ID code The existing table entry checks only the bits [1:0], which is not sufficient enough. Fix it to match bits [3:0], just like the other entries do. While at it, correct the comment for A57 and the A53 entry. Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-31coresight: always use stashed trace id value in etm4_trace_idSudeep Holla1-15/+1
etm4_trace_id is not guaranteed to be executed on the CPU whose ETM is being accessed. This leads to exception similar to below one if the CPU whose ETM is being accessed is in deeper idle states. So it must be executed on the CPU whose ETM is being accessed. Unhandled fault: synchronous external abort (0x96000210) at 0xffff000008db4040 Internal error: : 96000210 [#1] PREEMPT SMP Modules linked in: CPU: 5 PID: 5979 Comm: etm.sh Not tainted 4.7.0-rc3 #159 Hardware name: ARM Juno development board (r2) (DT) task: ffff80096dd34b00 ti: ffff80096dfe4000 task.ti: ffff80096dfe4000 PC is at etm4_trace_id+0x5c/0x90 LR is at etm4_trace_id+0x3c/0x90 Call trace: etm4_trace_id+0x5c/0x90 coresight_id_match+0x78/0xa8 bus_for_each_dev+0x60/0xa0 coresight_enable+0xc0/0x1b8 enable_source_store+0x3c/0x70 dev_attr_store+0x18/0x28 sysfs_kf_write+0x48/0x58 kernfs_fop_write+0x14c/0x1e0 __vfs_write+0x1c/0x100 vfs_write+0xa0/0x1b8 SyS_write+0x44/0xa0 el0_svc_naked+0x24/0x28 However, TRCTRACEIDR is not guaranteed to hold the previous programmed trace id if it enters deeper idle states. Further, the trace id that is computed in etm4_init_trace_id is programmed into TRCTRACEIDR only in etm4_enable_hw which happens much later in the sequence after coresight_id_match is executed from enable_source_store. This patch simplifies etm4_trace_id by returning the stashed trace id value similar to etm4_cpu_id. Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-07-15hwtracing/coresight-etm4x: Convert to hotplug state machineSebastian Andrzej Siewior1-38/+49
This driver has an asymmetry of ONLINE code without any corresponding tear down code. Otherwise, this is a straightforward conversion. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de> Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arm-kernel@lists.infradead.org Cc: rt@linutronix.de Link: http://lkml.kernel.org/r/20160713153337.228918408@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-05-03coresight: etm4x: add tracer ID for A72 Maia processor.Li Pengcheng1-0/+5
This patch adds a cellID for the ETMv4 tracer found on HiSillicon's A72 Maia processor. Signed-off-by: Li Pengcheng <lipengcheng8@huawei.com> Signed-off-by: Li Zhong <lizhong11@hisilicon.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-01coresight: etm4x: implementing the perf PMU APIMathieu Poirier1-5/+80
Adding a set of API allowing the Perf core to treat ETMv4 tracers like other PMUs. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-01coresight: etm4x: implementing user/kernel mode tracingMathieu Poirier1-0/+35
Adding new mode to limit tracing to kernel or user space. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-01coresight: etm4x: moving etm_drvdata::enable to atomic fieldMathieu Poirier1-9/+60
Similarly to ETMv3, moving etmv4_drvdata::enable to an atomic type that gives the 'mode' of a tracer and prevents multiple, simultanious access by different subsystems. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-01coresight: etm4x: unlocking tracers in default arch initMathieu Poirier1-6/+5
As with the ETMv3.x driver, calling 'smp_call_function_single()' twice in a row is highly ineffective. As such moving function 'etm4_os_unlock()' before the default initialisation takes place, which results in the same outcome. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-01coresight: etm4x: splitting etmv4 default configurationMathieu Poirier1-67/+61
Splitting and updating the default initialisation for each etmv4 configuration so that it can be called at the beginning of each session rather than initialisation time only. Since the trace ID isn't expected to change with every session, moving it with the default tracer initialisation. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-01coresight: etm4x: splitting struct etmv4_drvdataMathieu Poirier1-66/+68
Similar to what was done on etm3x, splitting driver structure etmv4_drvdata in two. One half is concerned with the HW characteristics that are generally static in nature. The other half deals with user configuration and will change from one trace session to another. No gain/loss of functionality is incurred from this patch. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-01coresight: etm4x: moving sysFS entries to a dedicated fileMathieu Poirier1-2029/+0
As with the etm3x driver, sysFS entries are big enough to justify their own file. As such moving all sysFS related declarations to a dedicated location. No gain/loss of functionality is incurred from this patch. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-20drivers/hwtracing: make coresight-* explicitly non-modularPaul Gortmaker1-3/+1
None of the Kconfig currently controlling compilation of any of the files here are tristate, meaning that none of it currently is being built as a module by anyone. We need not be concerned about .remove functions and blocking the unbind sysfs operations, since that was already done in a recent commit. Lets remove any remaining modular references, so that when reading the drivers there is no doubt they are builtin-only. All drivers get mostly the same changes, so they are handled in batch. Changes are (1) convert to builtin_amba_driver, (2) delete module.h include where unused, and (3) relocate the description into the comments so we don't need MODULE_DESCRIPTION and associated tags. The etm3x and etm4x use module_param_named, and have been adjusted to just include moduleparam.h for that purpose. In commit f309d4443130bf814e991f836e919dca22df37ae ("platform_device: better support builtin boilerplate avoidance") we introduced the builtin_driver macro. Here we use that support and extend it to amba driver registration, so where a driver is clearly non-modular and builtin-only, we can update with the simple mapping of module_amba_driver(...) ---> builtin_amba_driver(...) Since module_amba_driver() uses the same init level priority as builtin_amba_driver() the init ordering remains unchanged with this commit. Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-20coresight: etm3x: implementing perf_enable/disable() APIMathieu Poirier1-1/+3
That way traces can be enabled and disabled automatically from the Perf subystem using the PMU abstraction. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-20coresight: etm3x: adding operation mode for etm_enable()Mathieu Poirier1-1/+1
Adding a new mode to source API enable() in order to distinguish where the request comes from. That way it is possible to perform different operations based on where the request was issued from. The ETM4x driver is also modified to keep in sync with the new interface. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-20coresight: moving PM runtime operations to core frameworkMathieu Poirier1-6/+0
Moving PM runtime operations in Coresight devices enable() and disable() API to the framework core when a path is setup. That way the runtime core doesn't have to be involved everytime a path is enabled. It also avoids calling runtime PM operations in IRQ context. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-20coresight: "DEVICE_ATTR_RO" should defined as static.Eric Long1-1/+1
"DEVICE_ATTR_RO(name)" should be defined as static. And there is an unnecessary space at the front of the code. The sparse tool output logs as the following: coresight-etm4x.c:2224:1: warning: symbol 'dev_attr_trcoslsr' was not declared. Should it be static? coresight-etm4x.c:2225:1: warning: symbol 'dev_attr_trcpdcr' was not declared. Should it be static? coresight-etm4x.c:2226:1: warning: symbol 'dev_attr_trcpdsr' was not declared. Should it be static? And the smatch tool output logs as the following: of_coresight.c:89 of_coresight_alloc_memory() warn: inconsistent indenting Signed-off-by: Eric Long <eric.long@linaro.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-07coresight: implementing 'cpu_id()' APIMathieu Poirier1-0/+8
Other than plainly parsing the device tree there is no way to know which CPU a tracer is affined to. As such adding an interface to lookup the CPU field enclosed in the etm_drvdata structure that was initialised at boot time. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-07coresight: removing bind/unbind options from sysfsMathieu Poirier1-12/+1
The coresight drivers have absolutely no control over bind and unbind operations triggered from sysfs. The operations simply can't be cancelled or denied event when one or several tracing sessions are under way. Since the memory associated to individual device is invariably freed, the end result is a kernel crash when the path from source to sink is travelled again as demonstrated here[1]. One solution could be to keep track of all the path (i.e tracing session) that get created and iterate through the elements of those path looking for the coresight device that is being removed. This proposition doesn't scale well since there is no upper bound on the amount of concurrent trace session that can be created. With the above in mind, this patch prevent devices from being unbounded from their driver by using the driver->suppress_bind_attr option. That way trace sessions can be managed without fearing to loose devices. Since device can't be removed anymore the xyz_remove() functions found in each driver is also removed. [1]. http://www.spinics.net/lists/arm-kernel/msg474952.html Reported-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-07Coresight: ETMv4: Prevent TRCRSCTLR0&1 from being accessedChunyan Zhang1-6/+16
1. TRCRSCTLRn - Resource Selection Control Registers n=0~1 are reserved, we shouldn't access them. 2. The max number of 'n' here is defined in TRCIDR4.NUMRSPAIR whoes value indicates the number of resource selection *pairs*, and 0 indicates one resource selection pair, 1 indicates two pairs, and so on ... So, the total number of resource selection control registers which we can access is (TRCIDR4.NUMRSPAIR * 2) Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-05coresight-etm4x: Support context-ID tracing when PID namespace is enabledChunyan Zhang1-6/+15
Like ETTv3, ETMv4 also needs the similar modifications to support Context ID tracing when PID namespace is enabled. Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.