aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/i2c/busses (follow)
AgeCommit message (Collapse)AuthorFilesLines
2015-10-23i2c: pnx: fix runtime warnings caused by enabling unprepared clockVladimir Zapolskiy1-5/+5
The driver can not be used on a platform with common clock framework until clk_prepare/clk_unprepare calls are added, otherwise clk_enable calls will fail and a WARN is generated. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-10-22i2c: mv64xxx: really allow I2C offloadingHezi Shahmoon1-2/+0
Commit 00d8689b85a7 ("i2c: mv64xxx: rework offload support to fix several problems") completely reworked the offload support, but left a debugging-related "return false" at the beginning of the mv64xxx_i2c_can_offload() function. This has the unfortunate consequence that offloading is in fact never used, which wasn't really the intention. This commit fixes that problem by removing the bogus "return false". Fixes: 00d8689b85a7 ("i2c: mv64xxx: rework offload support to fix several problems") Signed-off-by: Hezi Shahmoon <hezi@marvell.com> [Thomas: reworked commit log and title.] Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: <stable@vger.kernel.org>
2015-10-18i2c: designware: Do not use parameters from ACPI on Dell Inspiron 7348Mika Westerberg1-0/+20
ACPI SSCN/FMCN methods were originally added because then the platform can provide the most accurate HCNT/LCNT values to the driver. However, this seems not to be true for Dell Inspiron 7348 where using these causes the touchpad to fail in boot: i2c_hid i2c-DLL0675:00: failed to retrieve report from device. i2c_designware INT3433:00: i2c_dw_handle_tx_abort: lost arbitration i2c_hid i2c-DLL0675:00: failed to retrieve report from device. i2c_designware INT3433:00: controller timed out The values received from ACPI are (in fast mode): HCNT: 72 LCNT: 160 this translates to following timings (input clock is 100MHz on Broadwell): tHIGH: 720 ns (spec min 600 ns) tLOW: 1600 ns (spec min 1300 ns) Bus period: 2920 ns (assuming 300 ns tf and tr) Bus speed: 342.5 kHz Both tHIGH and tLOW are within the I2C specification. The calculated values when ACPI parameters are not used are (in fast mode): HCNT: 87 LCNT: 159 which translates to: tHIGH: 870 ns (spec min 600 ns) tLOW: 1590 ns (spec min 1300 ns) Bus period 3060 ns (assuming 300 ns tf and tr) Bus speed 326.8 kHz These values are also within the I2C specification. Since both ACPI and calculated values meet the I2C specification timing requirements it is hard to say why the touchpad does not function properly with the ACPI values except that the bus speed is higher in this case (but still well below the max 400kHz). Solve this by adding DMI quirk to the driver that disables using ACPI parameters on this particulare machine. Reported-by: Pavel Roskin <plroskin@gmail.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Tested-by: Pavel Roskin <plroskin@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org
2015-10-15i2c: designware-platdrv: enable RuntimePM before registering to the coreWolfram Sang1-6/+7
The core may register clients attached to this master which may use funtionality from the master. So, RuntimePM must be enabled before, otherwise this will fail. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: stable@kernel.org
2015-10-15i2c: s3c2410: enable RuntimePM before registering to the coreWolfram Sang1-3/+5
The core may register clients attached to this master which may use funtionality from the master. So, RuntimePM must be enabled before, otherwise this will fail. While here, move drvdata, too. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Kukjin Kim <kgene@kernel.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org
2015-10-15i2c: rcar: enable RuntimePM before registering to the coreWolfram Sang1-3/+4
The core may register clients attached to this master which may use funtionality from the master. So, RuntimePM must be enabled before, otherwise this will fail. While here, move drvdata, too. Reported-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org
2015-09-08Merge branch 'i2c/for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds16-446/+1406
Pull i2c updates from Wolfram Sang: "Features: - new drivers: Renesas EMEV2, register based MUX, NXP LPC2xxx - core: scans DT and assigns wakeup interrupts. no driver changes needed. - core: some refcouting issues fixed and better API for that - core: new helper function for best effort block read emulation - slave framework: proper DT bindings and userspace instantiation - some bigger work for xiic, pxa, omap drivers .. and quite a number of smaller driver fixes, cleanups, improvements" * 'i2c/for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (65 commits) i2c: mux: reg Change ioread endianness for readback i2c: mux: reg: fix compilation warnings i2c: mux: reg: simplify register size checking i2c: muxes: fix leaked i2c adapter device node references i2c: allow specifying separate wakeup interrupt in device tree of/irq: export of_get_irq_byname() i2c: xgene-slimpro: dma_mapping_error() doesn't return an error code i2c: Replace I2C_CROS_EC_TUNNEL dependency eeprom: at24: use i2c_smbus_read_i2c_block_data_or_emulated i2c: core: Add support for best effort block read emulation i2c: lpc2k: add driver i2c: mux: Add register-based mux i2c-mux-reg i2c: dt: describe generic bindings i2c: slave: print warning if slave flag not set i2c: support 10 bit and slave addresses in sysfs 'new_device' i2c: take address space into account when checking for used addresses i2c: apply DT flags when probing i2c: make address check indpendent from client struct i2c: rename address check functions i2c: apply address offset for slaves, too ...
2015-09-04Merge tag 'mfd-for-linus-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfdLinus Torvalds1-1/+119
Pull MFD updates from Lee Jones: "New Device Support: - New Clocksource driver from ST - New MFD/ACPI/DMA drivers for Intel's Sunrisepoint PCH based platforms - Add support for Arizona WM8998 and WM1814 - Add support for Dialog Semi DA9062 and DA9063 - Add support for Kontron COMe-bBL6 and COMe-cBW6 - Add support for X-Powers AXP152 - Add support for Atmel, many - Add support for STMPE, many - Add support for USB in X-Powers AXP22X Core Frameworks: - New Base API to traverse devices and their children in reverse order Bug Fixes: - Fix race between runtime-suspend and IRQs - Obtain platform data form more reliable source Fix-ups: - Constifying things - Variable signage changes - Kconfig depends|selects changes - Make use of BIT() macro - Do not supply .owner attribute in *_driver structures - MAINTAINERS entries - Stop using set_irq_flags() - Start using irq_set_chained_handler_and_data() - Export DT device ID structures" * tag 'mfd-for-linus-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (69 commits) mfd: jz4740-adc: Init mask cache in generic IRQ chip mfd: cros_ec: spi: Add OF match table mfd: stmpe: Add OF match table mfd: max77686: Split out regulator part from the DT binding mfd: Add DT binding for Maxim MAX77802 IC mfd: max77686: Use a generic name for the PMIC node in the example mfd: max77686: Don't suggest in binding to use a deprecated property mfd: Add MFD_CROS_EC dependencies mfd: cros_ec: Remove CROS_EC_PROTO dependency for SPI and I2C drivers mfd: axp20x: Add a cell for the usb power_supply part of the axp20x PMICs mfd: axp20x: Add missing registers, and mark more registers volatile mfd: arizona: Fixup some formatting/white space errors mfd: wm8994: Fix NULL pointer exception on missing pdata of: Add vendor prefix for Nuvoton mfd: mt6397: Implement wake handler and suspend/resume to handle wake up event mfd: atmel-hlcdc: Add support for new SoCs mfd: Export OF module alias information in missing drivers mfd: stw481x: Export I2C module alias information mfd: da9062: Support for the DA9063 OnKey in the DA9062 core mfd: max899x: Avoid redundant irq_data lookup ...
2015-08-24i2c: xgene-slimpro: dma_mapping_error() doesn't return an error codeDan Carpenter1-4/+4
The dma_mapping_error() function returns true if there is an error, it doesn't return an error code. We should return -ENOMEM. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org
2015-08-24i2c: Replace I2C_CROS_EC_TUNNEL dependencyJavier Martinez Canillas1-1/+1
The ChromeOS EC tunnel I2C bus driver depend on CROS_EC_PROTO but MFD_CROS_EC select CROS_EC_PROTO instead. Mixing select and depends on is bad practice as it may lead to circular Kconfig dependencies. Since the platform device that is matched with the I2C bus driver is registered by the ChromeOS EC mfd driver, I2C_CROS_EC_TUNNEL really depends on MFD_CROS_EC. And because this config option selects CROS_EC_PROTO, that dependency is met as well. So make the driver to depend on MFD_CROS_EC instead of CROS_EC_PROTO. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-08-24i2c: lpc2k: add driverJoachim Eastwood3-0/+524
Add support for the I2C controller found on several NXP devices including LPC2xxx, LPC178x/7x and LPC18xx/43xx. The controller is implemented as a state machine and the driver act upon the state changes when the bus is accessed. The I2C controller supports master/slave operation, bus arbitration, programmable clock rate, and speeds up to 1 Mbit/s. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-08-11i2c: mediatek: Fixup i2c ack error interrupt handlingEddie Huang1-4/+11
When occur i2c ack error, i2c controller generate two interrupts, first is the ack error interrupt, then the complete interrupt. i2c interrupt handler should keep the two interrupt value, and only call complete() for the complete interrupt. Signed-off-by: Liguo Zhang <liguo.zhang@mediatek.com> Signed-off-by: Eddie Huang <eddie.huang@mediatek.com> Reviewed-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-08-11i2c: mediatek: Reset DMA engine in hardware init functionEddie Huang1-0/+6
Reset DMA in hardware init function to avoid unknown hardware state before do any I2C operation. Signed-off-by: Liguo Zhang <liguo.zhang@mediatek.com> Signed-off-by: Eddie Huang <eddie.huang@mediatek.com> Reviewed-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-08-11i2c: i801: Create iTCO device on newer Intel PCHsMika Westerberg1-1/+119
Starting from Intel Sunrisepoint (Skylake PCH) the iTCO watchdog resources have been moved to reside under the i801 SMBus host controller whereas previously they were under the LPC device. In order to support the iTCO watchdog on newer PCHs we need to create the platform device here in the SMBus driver and pass all known resources using platform data. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-08-10i2c: viperboard: clean up inconsistent indentingColin Ian King1-5/+5
Minor clean up of indenting, no functional change Signed-off-by: Colin Ian King <colin.king@canonical.com> [wsa: squashed two lines into one] Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-08-10i2c: cadence: set THIS_MODULE to the owner of the adapterMasahiro Yamada1-0/+1
The owner of the adapter is missing, while this driver is tristate. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-08-10i2c: designware: Make debug print in i2c_dw_isr() shorterJarkko Nikula1-2/+1
Printing adapter name is irrelevant from this debug print and makes output needlessly long. Having already device and functions names printed here is enough for debugging. While at it remove extra space from "enabled= 0x" and use "%#x" for printing "0x" prefixed hexadecimal values. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> [wsa: made it a oneliner] Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-08-10i2c: designware-pci: use IRQF_COND_SUSPEND flagAndy Shevchenko1-2/+2
The mentioned flag fixes a warning on Intel Edison board since one of the I2C controller shares IRQ line with watchdog timer. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-08-10i2c: parport: Add VCT-jig adapterOndrej Zary1-0/+8
Add support for VCT-jig parallel port I2C adapter to i2c-parport. The adapter schematic can be found here (in the RAR file): http://remont-aud.net/shop/22/desc/vct-jig-komplekt-dlja-samostojatelnoj-sborki Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-08-10i2c: removed work arounds in i2c driver for Zynq Ultrascale+ MPSoCAnurag Kumar Vulisha1-11/+57
Cadence 1.0 version has bugs which have been fixed in the cadence 1.4 version. This patch removes the quirks present in the driver for cadence 1.4 version. Signed-off-by: Anurag Kumar Vulisha <anuragku@xilinx.com> [wsa: fixed indentation issues in r1p10_i2c_def] Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-08-10i2c: tegra: add support for fast plus (FM+) mode clock rateLaxman Dewangan1-2/+15
Tegra I2C controller required to configure the clock divisor register inside controller to different value based on the clock speed. The recommended clock divisor for the I2C controller for standard/fast mode is 0x19 and for fast-mode plus is 0x10. Add support to configure clock divisor register of I2C controller based on bus clock rate. This clock divisor is supported form T114 onwards. Signed-off-by: Chaitanya Bandi <bandik@nvidia.com> Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-08-10i2c: tegra: update CONFIG_LOAD for new conifigurationLaxman Dewangan1-0/+35
Once the new configuration is set on the conifg register of I2C controller, it is require to update the CONFIG_LOAD register to transfer the new SW configuration to actual HW internal registers that would be used in the actual logic. It is like, SW is programming only shadow registers through regular configuration and when these load_config bit fields are set to 1, it causes the regular/shadows registers configuration transferred to the HW internal active registers. So SW has to set these bit fields at the end of all regular registers configuration. And these config_load bits are HW auto-clear bits. HW clears these bit fields once the register configuration is moved to HW internal active registers. So SW has to wait until these bits are auto-cleared before going for any further programming This mechanism is supported on T124 and after this SoCs. Signed-off-by: Chaitanya Bandi <bandik@nvidia.com> Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-08-10i2c: omap: fix cleanup regressionWolfram Sang1-1/+1
Patch "i2c: omap: abolish variable name confusion" triggered a coccinelle warning which we fix here: drivers/i2c/busses/i2c-omap.c:1333:5-24: pm_runtime_get_sync returns < 0 as error. Unecessary IS_ERR_VALUE at line 1334 Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-08-10i2c: xiic: Do not continue in case of errors in RxShubhrajyoti Datta1-0/+2
In case of error conditions like Arbitration lost or NACK lets signal the waiting process. Handle error cases in the Rx path Signed-off-by: Shubhrajyoti Datta <shubhraj@xilinx.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-08-10i2c: xiic: Service all interrupts in isrShubhrajyoti Datta1-14/+10
Currently only one interrupt is serviced in the isr. In case the multiple interrupts happen simultenously we service and ack only one of them. Check for all the causes in the isr and service them. Signed-off-by: Shubhrajyoti Datta <shubhraj@xilinx.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-08-10i2c: xiic: Remove the Addressed as slave interruptShubhrajyoti Datta1-1/+1
Currently there is no slave mode support in the driver also in the isr we just ack it and do nothing. So disable the AAS interrupt. Signed-off-by: Shubhrajyoti Datta <shubhraj@xilinx.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-08-10i2c: xiic: Remove busy loop while waiting for bus busyShubhrajyoti Datta1-1/+1
Remove the busy loop while waiting for bus busy. Instead let the processor sleep. Signed-off-by: Shubhrajyoti Datta <shubhraj@xilinx.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-08-10i2c: xiic: Remove the disabling of interruptsShubhrajyoti Datta1-7/+0
Currently before every transfer the interrupts are disabled. So incase the slave nacks in the middle of the transfer the current transfer is not aborted. Upon enabling the interrupts conditions like NACK , arbitration lost will not be masked. Remove the disabling of the interrupts. Signed-off-by: Shubhrajyoti Datta <shubhraj@xilinx.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-08-10i2c: xiic: Do not reset controller before every transferShubhrajyoti Datta1-1/+0
Currently before every transfer the controller is reinitialised. We are already resetting the controller upon errors so upon every transfer is a performance kill. Remove the same. Signed-off-by: Shubhrajyoti Datta <shubhraj@xilinx.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-08-10i2c: xiic: move the xiic_process to thread contextShubhrajyoti Datta1-13/+20
The xiic_process is a 154 line code that runs in isr context currently move it to thread context. Also the name xiic_process suggests that the intension was to run in process context. Signed-off-by: Shubhrajyoti Datta <shubhraj@xilinx.com> [wsa: initialized irqreturn_t to IRQ_NONE instead of IRQ_HANDLED] Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-08-10i2c: xiic: Remove the disabling of interruptsShubhrajyoti Datta1-3/+0
Currently the interrupts are disabled at the start of the isr and enabled at the end of the isr. Remove the same. In case the slave device NACKs the transaction while in the isr the transfer will continue and the NACK interrupt will arrive only after the isr is serviced. Signed-off-by: Shubhrajyoti Datta <shubhraj@xilinx.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-08-10i2c: pxa: Use devm_ variants in probe functionVaibhav Hiremath1-51/+26
This patch cleans up i2c_pxa_probe() function, - Use devm_ variants wherever This will clean both probe exit and i2c_pxa_remove() functions - Check platform resource before parsing any other data from DT/platform - Use dev_err on failure from i2c_add_numbered_adapter() - Use pr_info instead of printk for KERN_INFO Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> [wsa: removed unneeded error prinout after devm_ioremap_resource] Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-08-10i2c: pxa: Update debug function to dump more info on errorVaibhav Hiremath1-7/+15
Update i2c_pxa_scream_blue_murder() fn to print more information in case of error. Also, use dev_err variants instead of printk. Signed-off-by: Jett.Zhou <jtzhou@marvell.com> Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org> Cc: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-08-10i2c: pxa: Fix compile warning in 64bit modeYipeng Yao1-1/+3
Fix below warning message, coming from 64 bit toolchain. drivers/i2c/busses/i2c-pxa.c:1237:15: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] Signed-off-by: Yipeng Yao <ypyao@marvell.com> [vaibhav.hiremath@linaro.org: Updated Changelog] Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org> Cc: Wolfram Sang <wsa@the-dreams.de> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-08-10i2c: pxa: Return I2C_RETRY when timeout in pio modeShouming Wang1-1/+3
In case of timeout in pio mode of operation return I2C_RETRY. This behavior will be same as interrupt mode of operation. Signed-off-by: Shouming Wang <wangshm@marvell.com> [vaibhav.hiremath@linaro.org: Updated changelog] Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-08-10i2c: pxa: No need to set slave addr for i2c master mode resetVaibhav Hiremath1-1/+1
Normally i2c controller works as master, so slave addr is not needed, or it will impact some slave device (eg. ST NFC chip) i2c accesses, because it has the same i2c address with controller. For example, On the pxa1928 based platform, where PMIC (88pm860) is present @0x30 address on TWSI0 interface, and if we set 0x30 as a slave address in pxa1928 TWSI0 module, all the transactions towards PMIC would go for toss. Signed-off-by: Jett.Zhou <jtzhou@marvell.com> Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-08-10i2c: pxa: keep i2c irq ON in suspendLeilei Shang1-2/+3
During suspend there may still be some i2c access happening, as the interrupt is shared between multiple drivers. And if we don't keep i2c irq ON, there may be i2c access timeout if i2c is in irq mode of operation. Signed-off-by: Raul Xiong <xjian@marvell.com> Signed-off-by: Xiaofan Tian <tianxf@marvell.com> [vaibhav.hiremath@linaro.org: updated Changelog] Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org> Cc: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-08-10i2c: emev2: add driverWolfram Sang3-0/+340
Add a basic driver for the Renesas EMEV2 SoC. Based on the driver from the BSP which was first worked on by Ian, and made ready for upstream by me. Signed-off-by: Ian Molton <ian.molton@codethink.co.uk> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-08-10i2c: omap: on ->remove() call pm_runtime_put_sync()Felipe Balbi1-1/+1
we're about to remove the module, so we can't really schedule a PM transition in the future, we must wait for it to finish. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-08-10i2c: omap: abolish variable name confusionFelipe Balbi1-299/+299
struct device pointers are usually called dev. Calling our struct omap_i2c_dev pointers also dev has caused enough confusion. This is the result of a few simple sed rules to convert all struct omap_i2c_dev pointers to be called omap instead. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-08-10i2c: omap: switch to dev_get_drvdata()Felipe Balbi1-4/+2
there's no need to fetch the platform_device in order to dereference it back to the dev pointer to access drvdata, we can use dev_get_drvdata() instead. Signed-off-by: Felipe Balbi <balbi@ti.com> Acked-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-08-10i2c: parport: start using pr_fmtSudip Mukherjee1-8/+8
Start using pr_fmt and convert all remaining printk to use pr_* family of macros. Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> [wsa: remove print on kzalloc failure] Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-08-10i2c: parport: use dev_*Sudip Mukherjee1-4/+5
Now parport is using device model so use dev_* macros instead of printk. Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-07-31i2c: Fix typo in i2c-bfin-twi.cMasanari Iida1-2/+2
This patch fix some typos found in a printk message and MODULE_DESCRIPTION. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Acked-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-07-31i2c: omap: fix bus recovery setupJan Luebbe1-0/+11
At least on the AM335x, enabling OMAP_I2C_SYSTEST_ST_EN is not enough to allow direct access to the SCL and SDA pins. In addition to ST_EN, we need to set the TMODE to 0b11 (Loop back & SDA/SCL IO mode select). Also, as the reset values of SCL_O and SDA_O are 0 (which means "drive low level"), we need to set them to 1 (which means "high-impedance") to avoid unwanted changes on the pins. As a precaution, reset all these bits to their default values after recovery is complete. Signed-off-by: Jan Luebbe <jlu@pengutronix.de> Tested-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-07-09i2c: jz4780: Fix return value if probe failsAxel Lin1-7/+8
Current code returns 0 if fails to read clock-frequency DT property, fix it. Also add checking return value of clk_prepare_enable and propagate return value of devm_request_irq. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-07-09i2c: xgene-slimpro: Fix missing mbox_free_channel call in probe error pathAxel Lin1-0/+1
Free requested mailbox channel before return error. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-07-09i2c: I2C_MT65XX should depend on HAS_DMAGeert Uytterhoeven1-0/+1
If NO_DMA=y: ERROR: "dma_unmap_single" [drivers/i2c/busses/i2c-mt65xx.ko] undefined! ERROR: "dma_mapping_error" [drivers/i2c/busses/i2c-mt65xx.ko] undefined! ERROR: "dma_map_single" [drivers/i2c/busses/i2c-mt65xx.ko] undefined! Add a dependency on HAS_DMA to fix this. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-06-26Merge tag 'char-misc-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds1-5/+33
Pull char/misc driver updates from Greg KH: "Here's the big char/misc driver pull request for 4.2-rc1. Lots of mei, extcon, coresight, uio, mic, and other driver updates in here. Full details in the shortlog. All of these have been in linux-next for some time with no reported problems" * tag 'char-misc-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (176 commits) mei: me: wait for power gating exit confirmation mei: reset flow control on the last client disconnection MAINTAINERS: mei: add mei_cl_bus.h to maintained file list misc: sram: sort and clean up included headers misc: sram: move reserved block logic out of probe function misc: sram: add private struct device and virt_base members misc: sram: report correct SRAM pool size misc: sram: bump error message level on unclean driver unbinding misc: sram: fix device node reference leak on error misc: sram: fix enabled clock leak on error path misc: mic: Fix reported static checker warning misc: mic: Fix randconfig build error by including errno.h uio: pruss: Drop depends on ARCH_DAVINCI_DA850 from config uio: pruss: Add CONFIG_HAS_IOMEM dependence uio: pruss: Include <linux/sizes.h> extcon: Redefine the unique id of supported external connectors without 'enum extcon' type char:xilinx_hwicap:buffer_icap - change 1/0 to true/false for bool type variable in function buffer_icap_set_configuration(). Drivers: hv: vmbus: Allocate ring buffer memory in NUMA aware fashion parport: check exclusive access before register w1: use correct lock on error in w1_seq_show() ...
2015-06-25Merge branch 'i2c/for-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds21-123/+2552
Pull i2c updates from Wolfram Sang: "Highlights: - new drivers for Mediatek I2C, APM X-Gene, Broadcom Settop - major updates to at91, davinci - bugfixes to the mux infrastructure when dealing with the new quirk mechanism - more users for the bus recovery feature - further improvements to the slave framework Plus the usual bunch of smaller driver and core improvements and fixes. There is one patch removing old code from an ARM platform. This has been acked by the sh_mobile maintainer Simon Horman" * 'i2c/for-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (48 commits) i2c: busses: i2c-bcm2835: limits cdiv to allowed values i2c: sh_mobile: use proper type for timeout i2c: sh_mobile: use adapter default for timeout i2c: rcar: use proper type for timeout i2c: rcar: use adapter default for timeout i2c: designware: Make sure the device is suspended before disabling runtime PM i2c: tegra: apply size limit quirk i2c: tegra: don't advertise SMBUS_QUICK i2c: octeon: remove unused signal handling i2c: davinci: Optimize SCL generation i2c: mux: pca954x: Use __i2c_transfer because of quirks i2c: mux: Use __i2c_transfer() instead of calling parent's master_xfer() i2c: use parent adapter quirks in mux i2c: bcm2835: clear reserved bits in S-Register ARM: shmobile: r8a7740: remove I2C errata handling i2c: sh_mobile: add errata workaround i2c: at91: fix code checker warnings i2c: busses: xgene-slimpro: fix incorrect __init declation for probe i2c: davinci: Avoid sending to own address i2c: davinci: Refactor i2c_davinci_wait_bus_not_busy() ...
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.