aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/i2c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2022-08-21i2c: imx: Make sure to unregister adapter on remove()Uwe Kleine-König1-9/+11
If for whatever reasons pm_runtime_resume_and_get() fails and .remove() is exited early, the i2c adapter stays around and the irq still calls its handler, while the driver data and the register mapping go away. So if later the i2c adapter is accessed or the irq triggers this results in havoc accessing freed memory and unmapped registers. So unregister the software resources even if resume failed, and only skip the hardware access in that case. Fixes: 588eb93ea49f ("i2c: imx: add runtime pm support to improve the performance") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-08-21Revert "i2c: scmi: Replace open coded device_get_match_data()"Wolfram Sang1-2/+7
This reverts commit 9ae551ded5ba55f96a83cd0811f7ef8c2f329d0c. We got a regression report, so ensure this machine boots again. We will come back with a better version hopefully. Reported-by: Josef Johansson <josef@oderland.se> Link: https://lore.kernel.org/r/4d2d5b04-0b6c-1cb1-a63f-dc06dfe1b5da@oderland.se Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-08-11i2c: move core from strlcpy to strscpyWolfram Sang2-2/+2
Follow the advice of the below link and prefer 'strscpy'. Conversion is easy because no code used the return value. It has been done with a simple sed invocation. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-08-11i2c: move drivers from strlcpy to strscpyWolfram Sang47-49/+49
Follow the advice of the below link and prefer 'strscpy'. Conversion is easy because no driver used the return value and has been done with a simple sed invocation. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-08-11i2c: kempld: Support ACPI I2C device declarationChris Pringle1-0/+1
Adds an ACPI companion to the KEMPLD I2C driver so that it correctly detects any I2C devices nested under the KEMPLD's ACPI node (SBRG.CPLD). This allows I2C devices attached to the KEMPLD I2C adapter to be declared and instantiated via ACPI. Signed-off-by: Chris Pringle <chris.pringle@phabrix.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-08-11i2c: mediatek: add i2c compatible for MT8188Kewei Xu1-0/+43
Add i2c compatible for MT8188 and added mt_i2c_regs_v3[], since MT8188 i2c OFFSET_SLAVE_ADDR register changed from 0x04 to 0x94. Signed-off-by: Kewei Xu <kewei.xu@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Qii Wang <qii.wang@mediatek.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-08-11i2c: microchip-corei2c: fix erroneous late ack sendConor Dooley1-1/+1
A late ack is currently being sent at the end of a transfer due to incorrect logic in mchp_corei2c_empty_rx(). Currently the Assert Ack bit is being written to the controller's control reg after the last byte has been received, causing it to sent another byte with the ack. Instead, the AA flag should be written to the control register when the penultimate byte is read so it is sent out for the last byte. Reported-by: Andreas Buerkler <andreas.buerkler@enclustra.com> Fixes: 64a6f1c4987e ("i2c: add support for microchip fpga i2c controllers") Tested-by: Lewis Hanly <lewis.hanly@microchip.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> [wsa: fixed typos in commit message] Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-08-11i2c: qcom-geni: Fix GPI DMA buffer sync-backRobin Reckmann1-2/+3
Fix i2c transfers using GPI DMA mode for all message types that do not set the I2C_M_DMA_SAFE flag (e.g. SMBus "read byte"). In this case a bounce buffer is returned by i2c_get_dma_safe_msg_buf(), and it has to synced back to the message after the transfer is done. Add missing assignment of dma buffer in geni_i2c_gpi(). Set xferred in i2c_put_dma_safe_msg_buf() to true in case of no error to ensure the sync-back of this dma buffer to the message. Fixes: d8703554f4de ("i2c: qcom-geni: Add support for GPI DMA") Signed-off-by: Robin Reckmann <robin.reckmann@gmail.com> Tested-by: Luca Weiss <luca.weiss@fairphone.com> Tested-by: Caleb Connolly <caleb@connolly.tech> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-08-06Merge tag 'powerpc-6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds1-3/+4
Pull powerpc updates from Michael Ellerman: - Add support for syscall stack randomization - Add support for atomic operations to the 32 & 64-bit BPF JIT - Full support for KASAN on 64-bit Book3E - Add a watchdog driver for the new PowerVM hypervisor watchdog - Add a number of new selftests for the Power10 PMU support - Add a driver for the PowerVM Platform KeyStore - Increase the NMI watchdog timeout during live partition migration, to avoid timeouts due to increased memory access latency - Add support for using the 'linux,pci-domain' device tree property for PCI domain assignment - Many other small features and fixes Thanks to Alexey Kardashevskiy, Andy Shevchenko, Arnd Bergmann, Athira Rajeev, Bagas Sanjaya, Christophe Leroy, Erhard Furtner, Fabiano Rosas, Greg Kroah-Hartman, Greg Kurz, Haowen Bai, Hari Bathini, Jason A. Donenfeld, Jason Wang, Jiang Jian, Joel Stanley, Juerg Haefliger, Kajol Jain, Kees Cook, Laurent Dufour, Madhavan Srinivasan, Masahiro Yamada, Maxime Bizon, Miaoqian Lin, Murilo Opsfelder Araújo, Nathan Lynch, Naveen N. Rao, Nayna Jain, Nicholas Piggin, Ning Qiang, Pali Rohár, Petr Mladek, Rashmica Gupta, Sachin Sant, Scott Cheloha, Segher Boessenkool, Stephen Rothwell, Uwe Kleine-König, Wolfram Sang, Xiu Jianfeng, and Zhouyi Zhou. * tag 'powerpc-6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (191 commits) powerpc/64e: Fix kexec build error EDAC/ppc_4xx: Include required of_irq header directly powerpc/pci: Fix PHB numbering when using opal-phbid powerpc/64: Init jump labels before parse_early_param() selftests/powerpc: Avoid GCC 12 uninitialised variable warning powerpc/cell/axon_msi: Fix refcount leak in setup_msi_msg_address powerpc/xive: Fix refcount leak in xive_get_max_prio powerpc/spufs: Fix refcount leak in spufs_init_isolated_loader powerpc/perf: Include caps feature for power10 DD1 version powerpc: add support for syscall stack randomization powerpc: Move system_call_exception() to syscall.c powerpc/powernv: rename remaining rng powernv_ functions to pnv_ powerpc/powernv/kvm: Use darn for H_RANDOM on Power9 powerpc/powernv: Avoid crashing if rng is NULL selftests/powerpc: Fix matrix multiply assist test powerpc/signal: Update comment for clarity powerpc: make facility_unavailable_exception 64s powerpc/platforms/83xx/suspend: Remove write-only global variable powerpc/platforms/83xx/suspend: Prevent unloading the driver powerpc/platforms/83xx/suspend: Reorder to get rid of a forward declaration ...
2022-08-04Merge tag 'platform-drivers-x86-v6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86Linus Torvalds2-30/+10
Pull x86 platform driver updates from Hans de Goede: - Microsoft Surface: - SSAM hot unplug support - Surface Pro 8 keyboard cover support - Tablet mode switch support for Surface Pro 8 and Surface Laptop Studio - thinkpad_acpi: - AMD Automatice Mode Transitions (AMT) support - Mellanox: - Vulcan chassis COMe NVSwitch management support - XH3000 support - New generic/shared Intel P2SB (Primary to Sideband) support - Lots of small cleanups - Various small bugfixes - Various new hardware ids / quirks additions * tag 'platform-drivers-x86-v6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (105 commits) platform/x86/intel/vsec: Fix wrong type for local status variables platform/x86: p2sb: Move out of X86_PLATFORM_DEVICES dependency platform/x86: pmc_atom: Fix comment typo platform/surface: gpe: Add support for 13" Intel version of Surface Laptop 4 platform/olpc: Fix uninitialized data in debugfs write platform/mellanox: mlxreg-lc: Fix error flow and extend verbosity platform/x86: pmc_atom: Match all Lex BayTrail boards with critclk_systems DMI table platform/x86: sony-laptop: Remove useless comparisons in sony_pic_read_possible_resource() tools/power/x86/intel-speed-select: Remove unneeded semicolon tools/power/x86/intel-speed-select: Fix off by one check platform/surface: tabletsw: Fix __le32 integer access Documentation/ABI: Add new attributes for mlxreg-io sysfs interfaces Documentation/ABI: mlxreg-io: Fix contact info platform/mellanox: mlxreg-io: Add locking for io operations platform/x86: mlx-platform: Add COME board revision register platform/x86: mlx-platform: Add support for new system XH3000 platform/x86: mlx-platform: Introduce support for COMe NVSwitch management module for Vulcan chassis platform/x86: mlx-platform: Add support for systems equipped with two ASICs platform/x86: mlx-platform: Add cosmetic changes for alignment platform/x86: mlx-platform: Make activation of some drivers conditional ...
2022-08-04Merge tag 'spdx-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdxLinus Torvalds3-36/+6
Pull SPDX updates from Greg KH: "Here is the set of SPDX comment updates for 6.0-rc1. Nothing huge here, just a number of updated SPDX license tags and cleanups based on the review of a number of common patterns in GPLv2 boilerplate text. Also included in here are a few other minor updates, two USB files, and one Documentation file update to get the SPDX lines correct. All of these have been in the linux-next tree for a very long time" * tag 'spdx-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: (28 commits) Documentation: samsung-s3c24xx: Add blank line after SPDX directive x86/crypto: Remove stray comment terminator treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_406.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_398.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_391.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_390.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_385.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_320.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_319.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_318.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_298.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_292.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_179.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_168.RULE (part 2) treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_168.RULE (part 1) treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_160.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_152.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_149.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_147.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_133.RULE ...
2022-08-03Merge tag 'i2c-for-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds19-139/+1284
Pull i2c updates from Wolfram Sang: - new drivers: Microchip CoreI2C, Renesas RZV2M - quite some DT schema conversions and extensions - and a bunch of driver updates and improvements * tag 'i2c-for-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (37 commits) i2c: extend documentation about retvals of master_xfer functions i2c: mux-gpmux: Add of_node_put() when breaking out of loop dt-bindings: i2c: i2c-rk3x: Document Rockchip RV1126 i2c: qcom-geni: Use the correct return value i2c: cadence: Support PEC for SMBus block read i2c: qcom-geni: Propagate GENI_ABORT_DONE to geni_i2c_abort_xfer() i2c: brcmstb: Use dev_name() for adapter name i2c: Add Renesas RZ/V2M controller dt-bindings: i2c: Document RZ/V2M I2C controller i2c: mlxcpld: Add callback to notify probing completion i2c: scmi: Replace open coded device_get_match_data() i2c: stm32: add support for the STM32MP13 soc dt-bindings: i2c: st,stm32-i2c: add entry for stm32mp13 dt-bindings: i2c: i2c-rk3x: add rk3588 compatible i2c: add support for microchip fpga i2c controllers i2c: i801: Add support for Intel Meteor Lake-P dt-bindings: i2c: nomadik: Add power domain to binding dt-bindings: i2c: nomadik: Drop unused voltage supply from example i2c: Fix a potential use after free i2c: hisi: use HZ_PER_KHZ macro in units.h ...
2022-08-02Merge tag 'arm-drivers-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds1-1/+1
Pull ARM SoC drivers from Arnd Bergmann: "The SoC driver updates contain changes to improve support for additional SoC variants, as well as cleanups an minor bugfixes in a number of existing drivers. Notable updates this time include: - Support for Qualcomm MSM8909 (Snapdragon 210) in various drivers - Updates for interconnect drivers on Qualcomm Snapdragon - A new driver support for NMI interrupts on Fujitsu A64fx - A rework of Broadcom BCMBCA Kconfig dependencies - Improved support for BCM2711 (Raspberry Pi 4) power management to allow the use of the V3D GPU - Cleanups to the NXP guts driver - Arm SCMI firmware driver updates to add tracing support, and use the firmware interfaces for system power control and for power capping" * tag 'arm-drivers-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (125 commits) soc: a64fx-diag: disable modular build dt-bindings: soc: qcom: qcom,smd-rpm: add power-controller dt-bindings: soc: qcom: aoss: document qcom,sm8450-aoss-qmp dt-bindings: soc: qcom,rpmh-rsc: simplify qcom,tcs-config ARM: mach-qcom: Add support for MSM8909 dt-bindings: arm: cpus: Document "qcom,msm8909-smp" enable-method soc: qcom: spm: Add CPU data for MSM8909 dt-bindings: soc: qcom: spm: Add MSM8909 CPU compatible soc: qcom: rpmpd: Add compatible for MSM8909 dt-bindings: power: qcom-rpmpd: Add MSM8909 power domains soc: qcom: smd-rpm: Add compatible for MSM8909 dt-bindings: soc: qcom: smd-rpm: Add MSM8909 soc: qcom: icc-bwmon: Remove unnecessary print function dev_err() soc: fujitsu: Add A64FX diagnostic interrupt driver soc: qcom: socinfo: Fix the id of SA8540P SoC soc: qcom: Make QCOM_RPMPD depend on PM tty: serial: bcm63xx: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA spi: bcm63xx-hsspi: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA clk: bcm: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA hwrng: bcm2835: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA ...
2022-07-26i2c: mux-gpmux: Add of_node_put() when breaking out of loopLiang He1-0/+1
In i2c_mux_probe(), we should call of_node_put() when breaking out of for_each_child_of_node() which will automatically increase and decrease the refcount. Fixes: ac8498f0ce53 ("i2c: i2c-mux-gpmux: new driver") Signed-off-by: Liang He <windhl@126.com> Acked-by: Peter Rosin <peda@axentia.se> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-07-24i2c: qcom-geni: Use the correct return valueBjorn Andersson1-1/+1
The introduction of GPI support moved things around and instead of returning the result from geni_i2c_xfer() the number of messages in the request was returned, ignoring the actual result. Fix this. Fixes: d8703554f4de ("i2c: qcom-geni: Add support for GPI DMA") Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Andrew Halaney <ahalaney@redhat.com> Reviewed-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-07-24i2c: cadence: Support PEC for SMBus block readLars-Peter Clausen1-1/+9
SMBus packet error checking (PEC) is implemented by appending one additional byte of checksum data at the end of the message. This provides additional protection and allows to detect data corruption on the I2C bus. SMBus block reads support variable length reads. The first byte in the read message is the number of available data bytes. The combination of PEC and block read is currently not supported by the Cadence I2C driver. * When PEC is enabled the maximum transfer length for block reads increases from 33 to 34 bytes. * The I2C core smbus emulation layer relies on the driver updating the `i2c_msg` `len` field with the number of received bytes. The updated length is used when checking the PEC. Add support to the Cadence I2C driver for handling SMBus block reads with PEC. To determine the maximum transfer length uses the initial `len` value of the `i2c_msg`. When PEC is enabled this will be 2, when it is disabled it will be 1. Once a read transfer is done also increment the `len` field by the amount of received data bytes. This change has been tested with a UCM90320 PMBus power monitor, which requires block reads to access certain data fields, but also has PEC enabled by default. Fixes: df8eb5691c48 ("i2c: Add driver for Cadence I2C controller") Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Tested-by: Shubhrajyoti Datta <Shubhrajyoti.datta@amd.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-07-24i2c: qcom-geni: Propagate GENI_ABORT_DONE to geni_i2c_abort_xfer()Bjorn Andersson1-5/+15
Waiting for M_CMD_ABORT_EN in geni_i2c_abort_xfer() races with the interrupt handler which will read and clear the abort bit, the result is that every abort attempt takes 1 second and is followed by a message about the abort having times out. Introduce a new state variable to carry the abort_done state from the interrupt handler back to geni_i2c_abort_xfer(). Also, turn NACK and TIMEOUT errors into debug messages Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> [wsa: squashed two patches into one] Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-07-22i2c: brcmstb: Use dev_name() for adapter nameFlorian Fainelli1-3/+1
This make it easier to disambiguate the different i2c controllers present in a system, and then correlating with /proc/interrupts allows to know which instance is interrupt driven and which one is not. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-07-22i2c: Add Renesas RZ/V2M controllerPhil Edworthy3-0/+543
Yet another i2c controller from Renesas that is found on the RZ/V2M (r9a09g011) SoC. It can support only 100kHz and 400KHz operation. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> [wsa: removed superfluous class type and renamed a function] Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-07-16i2c: mlxcpld: Add callback to notify probing completionVadim Pasternak1-0/+4
Add notification to inform caller that driver probing has been completed. It allows to user, invoked platform device registration for "i2c-mlxcpld" driver, to be notified that bus adapter is available, and thus some devices could be connected to this bus. Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-07-16i2c: cadence: Change large transfer count reset logic to be unconditionalRobert Hancock1-25/+5
Problems were observed on the Xilinx ZynqMP platform with large I2C reads. When a read of 277 bytes was performed, the controller NAKed the transfer after only 252 bytes were transferred and returned an ENXIO error on the transfer. There is some code in cdns_i2c_master_isr to handle this case by resetting the transfer count in the controller before it reaches 0, to allow larger transfers to work, but it was conditional on the CDNS_I2C_BROKEN_HOLD_BIT quirk being set on the controller, and ZynqMP uses the r1p14 version of the core where this quirk is not being set. The requirement to do this to support larger reads seems like an inherently required workaround due to the core only having an 8-bit transfer size register, so it does not appear that this should be conditional on the broken HOLD bit quirk which is used elsewhere in the driver. Remove the dependency on the CDNS_I2C_BROKEN_HOLD_BIT for this transfer size reset logic to fix this problem. Fixes: 63cab195bf49 ("i2c: removed work arounds in i2c driver for Zynq Ultrascale+ MPSoC") Signed-off-by: Robert Hancock <robert.hancock@calian.com> Reviewed-by: Shubhrajyoti Datta <Shubhrajyoti.datta@amd.com> Acked-by: Michal Simek <michal.simek@amd.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-07-16i2c: scmi: Replace open coded device_get_match_data()Andy Shevchenko1-7/+2
Replace open coded device_get_match_data() in acpi_smbus_cmi_add(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-07-16i2c: stm32: add support for the STM32MP13 socAlain Volmat1-0/+7
Add a new compatible for the stm32mp13. Fast Mode Plus control register address differ from the one for STM32MP15. Signed-off-by: Alain Volmat <alain.volmat@foss.st.com> Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@foss.st.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-07-16i2c: imx: fix typo in commentFlavio Suligoi1-1/+1
to provid --> to provide Signed-off-by: Flavio Suligoi <f.suligoi@asem.it> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-07-16i2c: mlxcpld: Fix register setting for 400KHz frequencyVadim Pasternak1-1/+1
Fix setting of 'Half Cycle' register for 400KHz frequency. Fixes: fa1049135c15 ("i2c: mlxcpld: Modify register setting for 400KHz frequency") Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-07-14i2c: i801: convert to use common P2SB accessorAndy Shevchenko2-30/+10
Since we have a common P2SB accessor in tree we may use it instead of open coded variants. Replace custom code by p2sb_bar() call. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Henning Schild <henning.schild@siemens.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Jean Delvare <jdelvare@suse.de> Acked-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Lee Jones <lee@kernel.org>
2022-07-12Merge tag 'arm-soc/for-5.20/drivers' of https://github.com/Broadcom/stblinux into arm/driversArnd Bergmann1-1/+1
This pull request contains Broadcom SoC drivers updatse for 5.20, please pull the following: - Julia fixes a typo in the Broadcom STB legacy power management code - Liang fixes a device_node reference count leak in the Broadcom STB BIU driver code error path(s) - Nicolas and Stefan provide updates to the BCM2835 power management driver allowing its use on BCM2711 (Raspberry Pi 4) and to enable the use of the V3D GPU driver on such platforms. This is a merge of an immutable branch from Lee Jones' MFD tree - William removes the use of CONFIG_ARCH_BCM_63XX which is removed and replaces the dependencies with CONFIG_ARCH_BCMBCA which is how all of the DSL/PON SoCs from Broadcom are now supported in the upstream kernel. * tag 'arm-soc/for-5.20/drivers' of https://github.com/Broadcom/stblinux: tty: serial: bcm63xx: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA spi: bcm63xx-hsspi: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA clk: bcm: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA hwrng: bcm2835: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA phy: brcm-sata: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA i2c: brcmstb: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA ata: ahci_brcm: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA soc: bcm: bcm2835-power: Bypass power_on/off() calls soc: bcm: bcm2835-power: Add support for BCM2711's RPiVid ASB soc: bcm: bcm2835-power: Resolve ASB register macros soc: bcm: bcm2835-power: Refactor ASB control mfd: bcm2835-pm: Add support for BCM2711 mfd: bcm2835-pm: Use 'reg-names' to get resources soc: bcm: brcmstb: biuctrl: Add missing of_node_put() soc: bcm: brcmstb: pm: pm-arm: fix typo in comment Link: https://lore.kernel.org/r/20220711164451.3542127-6-f.fainelli@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-07-08i2c: brcmstb: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCAWilliam Zhang1-1/+1
Prepare for the BCM63138 ARCH_BCM_63XX migration to ARCH_BCMBCA. Make I2C_BRCMSTB depending on ARCH_BCMBCA. Signed-off-by: William Zhang <william.zhang@broadcom.com> Acked-by: Wolfram Sang <wsa@kernel.org> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2022-07-07i2c: cadence: Unregister the clk notifier in error pathSatish Nagireddy1-0/+1
This patch ensures that the clock notifier is unregistered when driver probe is returning error. Fixes: df8eb5691c48 ("i2c: Add driver for Cadence I2C controller") Signed-off-by: Satish Nagireddy <satish.nagireddy@getcruise.com> Tested-by: Lars-Peter Clausen <lars@metafoo.de> Reviewed-by: Michal Simek <michal.simek@amd.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-07-07i2c: add support for microchip fpga i2c controllersConor Dooley3-0/+492
Add Microchip CoreI2C i2c controller support. This driver supports the "hard" i2c controller on the Microchip PolarFire SoC & the basic feature set for "soft" i2c controller implemtations in the FPGA fabric. Co-developed-by: Daire McNamara <daire.mcnamara@microchip.com> Signed-off-by: Daire McNamara <daire.mcnamara@microchip.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-07-06i2c: i801: Add support for Intel Meteor Lake-PJarkko Nikula2-0/+4
Add SMBus PCI ID on Intel Meteor Lake-P. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-06-29i2c: piix4: Fix a memory leak in the EFCH MMIO supportJean Delvare1-9/+7
The recently added support for EFCH MMIO regions introduced a memory leak in that code path. The leak is caused by the fact that release_resource() merely removes the resource from the tree but does not free its memory. We need to call release_mem_region() instead, which does free the memory. As a nice side effect, this brings back some symmetry between the legacy and MMIO paths. Signed-off-by: Jean Delvare <jdelvare@suse.de> Reported-by: Yi Zhang <yi.zhang@redhat.com> Tested-by: Yi Zhang <yi.zhang@redhat.com> Reviewed-by: Terry Bowman <terry.bowman@amd.com> Tested-by: Terry Bowman <Terry.Bowman@amd.com> Fixes: 7c148722d074 ("i2c: piix4: Add EFCH MMIO support to region request and release") Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-06-22powerpc/mpc5xxx: Switch mpc5xxx_get_bus_frequency() to use fwnodeAndy Shevchenko1-3/+4
Switch mpc5xxx_get_bus_frequency() to use fwnode in order to help cleaning up other parts of the kernel from OF specific code. No functional change intended. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Chris Packham <chris.packham@alliedtelesis.co.nz> # for i2c-mpc Acked-by: Wolfram Sang <wsa@kernel.org> # for the I2C part Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for mscan/mpc5xxx_can Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220507100147.5802-2-andriy.shevchenko@linux.intel.com
2022-06-16i2c: Fix a potential use after freeXu Wang1-1/+2
Free the adap structure only after we are done using it. This patch just moves the put_device() down a bit to avoid the use after free. Fixes: 611e12ea0f12 ("i2c: core: manage i2c bus device refcount in i2c_[get|put]_adapter") Signed-off-by: Xu Wang <vulab@iscas.ac.cn> [wsa: added comment to the code, added Fixes tag] Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-06-15i2c: hisi: use HZ_PER_KHZ macro in units.hYicong Yang1-2/+1
HZ macros has been centralized in units.h since [1]. Use it to avoid duplicated definition. [1] commit e2c77032fcbe ("units: add the HZ macros") Signed-off-by: Yicong Yang <yangyicong@hisilicon.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-06-15i2c: qcom-cci: add msm8974 compatibleMatti Lehtimäki1-0/+35
MSM8974 CCI is the same as MSM8916 except it has two masters. Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com> Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-06-14i2c: mediatek: Fix an error handling path in mtk_i2c_probe()Christophe JAILLET1-2/+7
The clsk are prepared, enabled, then disabled. So if an error occurs after the disable step, they are still prepared. Add an error handling path to unprepare the clks in such a case, as already done in the .remove function. Fixes: 8b4fc246c3ff ("i2c: mediatek: Optimize master_xfer() and avoid circular locking") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Qii Wang <qii.wang@mediatek.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-06-14i2c: mv64xxx: Add atomic_xfer method to driverChris Morgan1-6/+46
Add an atomic_xfer method to the driver so that it behaves correctly when controlling a PMIC that is responsible for device shutdown. The atomic_xfer method added is similar to the one from the i2c-rk3x driver. When running an atomic_xfer a bool flag in the driver data is set, the interrupt is not unmasked on transfer start, and the IRQ handler is manually invoked while waiting for pending transfers to complete. Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-06-14i2c: mv64xxx: Remove shutdown method from driverChris Morgan1-9/+0
When I attempt to shut down (or reboot) my R8 based NTC CHIP with this i2c driver I get the following error: "i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0". Reboots are successful but shutdowns freeze. If I comment out the shutdown routine the device both reboots and shuts down successfully without receiving this error (however it does receive a warning of missing atomic_xfer). It appears that very few i2c drivers have a shutdown method, I assume because these devices are often used to communicate with PMICs (such as in my case with the R8 based NTC CHIP). I'm proposing we simply remove this method so long as it doesn't cause trouble for others downstream. I'll work on an atomic_xfer method and submit that in a different patch. Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-06-14i2c: xiic: Fix the type check for xiic_wakeupShubhrajyoti Datta1-2/+2
Fix the coverity warning mixed_enum_type: enumerated type mixed with another type We are passing an enum in the xiic_wakeup lets change the function parameters to reflect that. Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Acked-by: Michal Simek <michal.simek@amd.com> [wsa: fixed $subject with proper prefix] Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-06-13i2c: designware: Use standard optional ref clock implementationSerge Semin2-5/+11
Even though the DW I2C controller reference clock source is requested by the method devm_clk_get() with non-optional clock requirement the way the clock handler is used afterwards has a pure optional clock semantic (though in some circumstances we can get a warning about the clock missing printed in the system console). There is no point in reimplementing that functionality seeing the kernel clock framework already supports the optional interface from scratch. Thus let's convert the platform driver to using it. Note by providing this commit we get to fix two problems. The first one was introduced in commit c62ebb3d5f0d ("i2c: designware: Add support for an interface clock"). It causes not having the interface clock (pclk) enabled/disabled in case if the reference clock isn't provided. The second problem was first introduced in commit b33af11de236 ("i2c: designware: Do not require clock when SSCN and FFCN are provided"). Since that modification the deferred probe procedure has been unsupported in case if the interface clock isn't ready. Fixes: c62ebb3d5f0d ("i2c: designware: Add support for an interface clock") Fixes: b33af11de236 ("i2c: designware: Do not require clock when SSCN and FFCN are provided") Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-06-10treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_30.RULE (part 2)Thomas Gleixner3-36/+6
Based on the normalized pattern: this program is free software you can redistribute it and/or modify it under the terms of the gnu general public license as published by the free software foundation version 2 this program is distributed as is without any warranty of any kind whether express or implied without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference. Reviewed-by: Allison Randal <allison@lohutok.net> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-08i2c: dummy: Drop no-op remove functionUwe Kleine-König1-6/+0
A remove callback that just returns 0 is equivalent to no callback at all as can be seen in i2c_device_remove(). So simplify accordingly. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-06-08i2c: mxs: Silence a clang warningFabio Estevam1-1/+1
Change the of_device_get_match_data() cast to (uintptr_t) to silence the following clang warning: drivers/i2c/busses/i2c-mxs.c:802:18: warning: cast to smaller integer type 'enum mxs_i2c_devtype' from 'const void *' [-Wvoid-pointer-to-enum-cast] Reported-by: kernel test robot <lkp@intel.com> Fixes: c32abd8b5691 ("i2c: mxs: Remove unneeded platform_device_id") Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-06-08i2c: npcm7xx: Add check for platform_driver_registerJiasheng Jiang1-2/+1
As platform_driver_register() could fail, it should be better to deal with the return value in order to maintain the code consisitency. Fixes: 56a1485b102e ("i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Acked-by: Tali Perry <tali.perry1@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-06-08i2c: qcom-cci: simplify access to bus data structureVladimir Zapolskiy1-13/+14
Trivial non-functional change, which adds an alias to an extensively used data location. Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-06-08i2c: npcm: Capitalize the one-line commentTyrone Ting1-6/+6
Make the one-line comments capital in the driver to get the comment style consistent. Fixes: 56a1485b102e ("i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver") Signed-off-by: Tyrone Ting <kfting@nuvoton.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-06-08i2c: npcm: Support NPCM845Tyrone Ting3-48/+76
Add NPCM8XX I2C support. The NPCM8XX uses a similar i2c module as NPCM7XX. The internal HW FIFO is larger in NPCM8XX. Signed-off-by: Tyrone Ting <kfting@nuvoton.com> Acked-by: Tomer Maimon <tmaimon77@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-06-08i2c: npcm: Correct slave role behaviorTali Perry1-3/+6
Correct the slave transaction logic to be compatible with the generic slave backend driver. Fixes: 56a1485b102e ("i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver") Signed-off-by: Tali Perry <tali.perry1@gmail.com> Signed-off-by: Tyrone Ting <kfting@nuvoton.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-06-08i2c: npcm: Remove own slave addresses 2:10Tali Perry1-25/+16
NPCM can support up to 10 own slave addresses. In practice, only one address is actually being used. In order to access addresses 2 and above, need to switch register banks. The switch needs spinlock. To avoid using spinlock for this useless feature removed support of SA >= 2. Also fix returned slave event enum. Remove some comment since the bank selection is not required. The bank selection is not required since the supported slave addresses are reduced. Fixes: 56a1485b102e ("i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver") Signed-off-by: Tali Perry <tali.perry1@gmail.com> Signed-off-by: Tyrone Ting <kfting@nuvoton.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.