aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/i2c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2011-11-06Merge branch 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linuxLinus Torvalds4-0/+4
* 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (230 commits) Revert "tracing: Include module.h in define_trace.h" irq: don't put module.h into irq.h for tracking irqgen modules. bluetooth: macroize two small inlines to avoid module.h ip_vs.h: fix implicit use of module_get/module_put from module.h nf_conntrack.h: fix up fallout from implicit moduleparam.h presence include: replace linux/module.h with "struct module" wherever possible include: convert various register fcns to macros to avoid include chaining crypto.h: remove unused crypto_tfm_alg_modname() inline uwb.h: fix implicit use of asm/page.h for PAGE_SIZE pm_runtime.h: explicitly requires notifier.h linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h miscdevice.h: fix up implicit use of lists and types stop_machine.h: fix implicit use of smp.h for smp_processor_id of: fix implicit use of errno.h in include/linux/of.h of_platform.h: delete needless include <linux/module.h> acpi: remove module.h include from platform/aclinux.h miscdevice.h: delete unnecessary inclusion of module.h device_cgroup.h: delete needless include <linux/module.h> net: sch_generic remove redundant use of <linux/module.h> net: inet_timewait_sock doesnt need <linux/module.h> ... Fix up trivial conflicts (other header files, and removal of the ab3550 mfd driver) in - drivers/media/dvb/frontends/dibx000_common.c - drivers/media/video/{mt9m111.c,ov6650.c} - drivers/mfd/ab3550-core.c - include/linux/dmaengine.h
2011-11-03Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds2-2/+2
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (37 commits) MIPS: O32: Provide definition of registers ta0 .. ta3. MIPS: perf: Add Octeon support for hardware perf. MIPS: perf: Add support for 64-bit perf counters. MIPS: perf: Reorganize contents of perf support files. MIPS: perf: Cleanup formatting in arch/mips/kernel/perf_event.c MIPS: Add accessor macros for 64-bit performance counter registers. MIPS: Add probes for more Octeon II CPUs. MIPS: Add more CPU identifiers for Octeon II CPUs. MIPS: XLR, XLS: Add comment for smp setup MIPS: JZ4740: GPIO: Check correct IRQ in demux handler MIPS: JZ4740: GPIO: Simplify IRQ demuxer MIPS: JZ4740: Use generic irq chip MIPS: Alchemy: remove all CONFIG_SOC_AU1??? defines MIPS: Alchemy: kill au1xxx.h header MIPS: Alchemy: clean DMA code of CONFIG_SOC_AU1??? defines MIPS, IDE: Alchem, au1xxx-ide: Remove pb1200/db1200 header dep MIPS: Alchemy: Redo PCI as platform driver MIPS: Alchemy: more base address cleanup MIPS: Alchemy: rewrite USB platform setup. MIPS: Alchemy: abstract USB block control register access ... Fix up trivial conflicts in: arch/mips/alchemy/devboards/db1x00/platform.c drivers/ide/Kconfig drivers/mmc/host/au1xmmc.c drivers/video/Kconfig sound/mips/Kconfig
2011-11-03Merge branch 'for-next' of git://git.infradead.org/users/sameo/mfd-2.6Linus Torvalds1-1/+0
* 'for-next' of git://git.infradead.org/users/sameo/mfd-2.6: (80 commits) mfd: Fix missing abx500 header file updates mfd: Add missing <linux/io.h> include to intel_msic x86, mrst: add platform support for MSIC MFD driver mfd: Expose TurnOnStatus in ab8500 sysfs mfd: Remove support for early drop ab8500 chip mfd: Add support for ab8500 v3.3 mfd: Add ab8500 interrupt disable hook mfd: Convert db8500-prcmu panic() into pr_crit() mfd: Refactor db8500-prcmu request_clock() function mfd: Rename db8500-prcmu init function mfd: Fix db5500-prcmu defines mfd: db8500-prcmu voltage domain consumers additions mfd: db8500-prcmu reset code retrieval mfd: db8500-prcmu tweak for modem wakeup mfd: Add db8500-pcmu watchdog accessor functions for watchdog mfd: hwacc power state db8500-prcmu accessor mfd: Add db8500-prcmu accessors for PLL and SGA clock mfd: Move to the new db500 PRCMU API mfd: Create a common interface for dbx500 PRCMU drivers mfd: Initialize DB8500 PRCMU regs ... Fix up trivial conflicts in arch/arm/mach-imx/mach-mx31moboard.c arch/arm/mach-omap2/board-omap3beagle.c arch/arm/mach-u300/include/mach/irqs.h drivers/mfd/wm831x-spi.c
2011-11-01Merge branch 'for-linus/i2c-3.2' of git://git.fluff.org/bjdooks/linuxLinus Torvalds20-664/+1450
* 'for-linus/i2c-3.2' of git://git.fluff.org/bjdooks/linux: (47 commits) i2c-s3c2410: Add device tree support i2c-s3c2410: Keep a copy of platform data and use it i2c-nomadik: cosmetic coding style corrections i2c-au1550: dev_pm_ops conversion i2c-au1550: increase timeout waiting for master done i2c-au1550: remove unused ack_timeout i2c-au1550: remove usage of volatile keyword i2c-tegra: __iomem annotation fix i2c-eg20t: Add initialize processing in case i2c-error occurs i2c-eg20t: Fix flag setting issue i2c-eg20t: add stop sequence in case wait-event timeout occurs i2c-eg20t: Separate error processing i2c-eg20t: Fix 10bit access issue i2c-eg20t: Modify returned value s32 to long i2c-eg20t: Fix bus-idle waiting issue i2c-designware: Fix PCI core warning on suspend/resume i2c-designware: Add runtime power management support i2c-designware: Add support for Designware core behind PCI devices. i2c-designware: Push all register reads/writes into the core code. i2c-designware: Support multiple cores using same ISR ...
2011-11-01Merge branches 'for-32/i2c/nomadik', 'for-32/i2c/s3c2410-dt' and 'for-32/i2c/tegra-iomem' into for-linus/i2c-3.2Ben Dooks3-52/+167
2011-11-01Merge branch 'for-32/i2c/irqflags' into for-linus/i2c-3.2Ben Dooks9-10/+10
Conflicts: drivers/i2c/busses/i2c-designware-core.c Fixed up merge conflic
2011-11-01Merge branches 'for-32/i2c/omap-v4', 'for-32/i2c/imx-dt', 'for-32/i2c/eg20t-v4', 'for-32/i2c/designware-v5' and 'for-32/i2c/au1550' into for-linus/i2c-3.2Ben Dooks9-530/+1181
2011-10-31i2c: Add module.h to modular files prev. implicitly getting itPaul Gortmaker3-0/+3
These files use interfaces from linux/module.h, so they must include that file to avoid build errors when the implicit presence of module.h is removed. [with i2c-pxa-pci.c fix from Randy Dunlap <rdunlap@xenotime.net>] Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31i2c: add export.h to i2c-boardinfo.c for EXPORT_SYMBOLPaul Gortmaker1-0/+1
With module.h being implicitly everywhere via device.h, the absence of explicitly including something for EXPORT_SYMBOL went unnoticed. Since we are heading to fix things up and clean module.h from the device.h file, we need to explicitly include these files now. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-30i2c-algo-pca: Return standard fault codesJean Delvare1-2/+4
Adjust i2c-algo-pca to return fault codes compliant with Documentation/i2c/fault-codes, rather than the undocumented and vague -EREMOTEIO. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Wolfram Sang <w.sang@pengutronix.de>
2011-10-30i2c-algo-bit: Return standard fault codesJean Delvare1-7/+7
Adjust i2c-algo-bit to return fault codes compliant with Documentation/i2c/fault-codes, rather than the undocumented and vague -EREMOTEIO. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-10-30i2c-algo-bit: Be verbose on bus testing failureJean Delvare1-1/+3
If bus testing fails due to the bus being seen as busy, it might be helpful for developers to know which line is unexpectedly low. Signed-off-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
2011-10-30i2c-algo-bit: Let user test buses without failingJean Delvare1-3/+3
Always failing to register I2C buses when the line testing fails is a little harsh. While such a failure is definitely a bug in the driver that exposes the affected I2C bus, things may still work fine if the missing initialization steps are done later, before the I2C bus is used. So it seems a better debugging tool to just report the test failure by default. I introduce bit_test=2 if anyone really misses the original behavior of bit_test=1. Signed-off-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
2011-10-30i2c/scx200_acb: Fix section mismatch warning in scx200_pci_drvHarvey Yang1-3/+3
WARNING: drivers/i2c/busses/built-in.o(.data+0x47c8): Section mismatch in reference from the variable scx200_pci_drv to the function .devinit.text:scx200_probe() The variable scx200_pci_drv references the function __devinit scx200_probe() If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console Signed-off-by: Harvey Yang <harvey.huawei.yang@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-10-30i2c: I2C_ELEKTOR should depend on HAS_IOPORTGeert Uytterhoeven1-1/+1
On m68k, I get: drivers/i2c/busses/i2c-elektor.c: In function ‘pcf_isa_init’: drivers/i2c/busses/i2c-elektor.c:153: error: implicit declaration of function ‘ioport_map’ drivers/i2c/busses/i2c-elektor.c:153: warning: assignment makes pointer from integer without a cast drivers/i2c/busses/i2c-elektor.c: In function ‘elektor_probe’: drivers/i2c/busses/i2c-elektor.c:287: error: implicit declaration of function ‘ioport_unmap’ Since commit 82ed223c264def2b15ee4bec2e8c3048092ceb5f ("iomap: make IOPORT/PCI mapping functions conditional"), ioport_map() is only available on platforms that set HAS_IOPORT. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-10-29i2c-s3c2410: Add device tree supportThomas Abraham1-4/+106
Add device tree probe support for Samsung's s3c2410 i2c driver. Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-10-29i2c-s3c2410: Keep a copy of platform data and use itThomas Abraham1-4/+14
The platform data is copied into driver's private data and the copy is used for all access to the platform data. This simpifies the addition of device tree support for the i2c-s3c2410 driver. Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-10-29i2c-nomadik: cosmetic coding style correctionsJonas Aaberg1-43/+46
This fixes a number of whitespace and punctuation problems around the Nomadik I2C driver. Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-10-29i2c-au1550: dev_pm_ops conversionManuel Lauss1-10/+14
use newer dev_pm_ops for PM Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-10-29i2c-au1550: increase timeout waiting for master doneManuel Lauss1-1/+1
Double the timeout in the loop which busy-waits for the "master-done" bit to be set. This bit indicates whether an i2c transaction has completed; on the DB1300 and DB1550 boards this timeout is slightly too short and causes transactions to the WM8731 codec to be falsely flagged as failed. The timeout itself is necessary since transactions to non-existant slaves never set this bit in the first place (and cause i2cdetect to hang). With this change the WM8731 codec on the DB1300/DB1550 boards is correctly detected and initialized. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-10-29i2c-au1550: remove unused ack_timeoutManuel Lauss1-2/+0
The ack_timeout context member is unused, get rid of it. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-10-29i2c-au1550: remove usage of volatile keywordManuel Lauss1-153/+99
Replace the usage of "volatile"s with register accessor functions. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-10-29i2c-tegra: __iomem annotation fixOlof Johansson1-1/+1
drivers/i2c/busses/i2c-tegra.c:585:7: warning: incorrect type in assignment (different address spaces) drivers/i2c/busses/i2c-tegra.c:585:7: expected void *base drivers/i2c/busses/i2c-tegra.c:585:7: got void [noderef] <asn:2>* drivers/i2c/busses/i2c-tegra.c:619:16: warning: incorrect type in assignment (different address spaces) drivers/i2c/busses/i2c-tegra.c:619:16: expected void [noderef] <asn:2>*base drivers/i2c/busses/i2c-tegra.c:619:16: got void *base drivers/i2c/busses/i2c-tegra.c:689:10: warning: incorrect type in argument 1 (different address spaces) drivers/i2c/busses/i2c-tegra.c:689:10: expected void volatile [noderef] <asn:2>*addr drivers/i2c/busses/i2c-tegra.c:689:10: got void *base Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by; Stephen Warren <swarren@nvidia.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-10-29i2c-eg20t: Add initialize processing in case i2c-error occursTomoya MORINAGA1-0/+3
In case disconnecting physical connection, need to initialize i2c device for retry access. This patch adds initialize process in case bus-idle fails and Lost arbitration. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.lapis-semi.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-10-29i2c-eg20t: Fix flag setting issueTomoya MORINAGA1-0/+2
Currently, in case occurring abnormal event, internal flag variable(=pch_event_flag) is not reset. This patch fixes the issue. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.lapis-semi.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-10-29i2c-eg20t: add stop sequence in case wait-event timeout occursTomoya MORINAGA1-0/+3
add stop sequence in case wait-event timeout in write processing. (read processing already had it) Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.lapis-semi.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-10-29i2c-eg20t: Separate error processingTomoya MORINAGA1-58/+115
Error processing for NACK or wait-event must be precessed separately. So divide wait-event error processing into NACK-receiving and timeout. Add arbitration lost processing. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.lapis-semi.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-10-29i2c-eg20t: Fix 10bit access issueTomoya MORINAGA1-2/+63
Reported-by: Jeffrey (Sheng-Hui) Chu <jeffchu@broadcom.com> Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.lapis-semi.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-10-29i2c-eg20t: Modify returned value s32 to longTomoya MORINAGA1-5/+1
Type of wait_event_timeout is long not s32. This patch replaces s32 with long. Additionally, delete negative processing(ret < 0). Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.lapis-semi.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-10-29i2c-eg20t: Fix bus-idle waiting issueTomoya MORINAGA1-9/+9
Currently, when checking whether bus is idle or not, if timeout occurs, this function always returns success(zero). This patch fixes the issue. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.lapis-semi.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-10-29i2c-designware: Fix PCI core warning on suspend/resumeOctavian Purdila1-21/+8
PCI core warns if the legacy PM and new PM functions are present. Update the driver to only use the new power management framework. This patch fixes the following warning seen during suspend/resume: <7>[ 24.193850] i2c-designware-pci 0000:08:13.0: suspend <4>[ 24.193866] ------------[ cut here ]------------ <4>[ 24.193892] WARNING: at drivers/pci/pci-driver.c:605 pci_has_legacy_pm_support+0x48/0x4d() <4>[ 24.193925] Hardware name: OakTrail <4>[ 24.193936] Modules linked in: <4>[ 24.193958] Pid: 2834, comm: kworker/u:22 Tainted: G W 2.6.36greenridge-01402-gc8047e6 #171 <4>[ 24.193974] Call Trace: <4>[ 24.193999] [<c1033a93>] warn_slowpath_common+0x66/0xc2 <4>[ 24.194025] [<c1164143>] ? pci_has_legacy_pm_support+0x48/0x4d <4>[ 24.194052] [<c1033afe>] warn_slowpath_null+0xf/0x13 <4>[ 24.194079] [<c1164143>] pci_has_legacy_pm_support+0x48/0x4d <4>[ 24.194106] [<c11643ff>] pci_pm_suspend+0x22/0x154 <4>[ 24.194131] [<c11643dd>] ? pci_pm_suspend+0x0/0x154 <4>[ 24.194156] [<c11e8a7a>] pm_op+0x3e/0x95 <4>[ 24.194182] [<c11e931d>] __device_suspend+0x12e/0x194 <4>[ 24.194208] [<c11e974d>] ? dpm_drv_timeout+0x0/0x47 <4>[ 24.194237] [<c11e9729>] async_suspend+0x16/0x3a <4>[ 24.194265] [<c104de8e>] async_run_entry_fn+0x97/0x135 <4>[ 24.194291] [<c1043c34>] process_one_work+0x1c9/0x2db Signed-off-by: Octavian Purdila <octavian.purdila@intel.com> Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-10-29i2c-designware: Add runtime power management supportDirk Brandewie3-2/+98
Add runtime power management to the PCI driver. Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-10-29i2c-designware: Add support for Designware core behind PCI devices.Dirk Brandewie4-0/+329
Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-10-29i2c-designware: Push all register reads/writes into the core code.Dirk Brandewie3-102/+143
Move all register manipulation code into the core, also move register offset definitions to i2c-designware-core.c since the bus specific portions of the driver no longer need/use them. Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-10-29i2c-designware: Support multiple cores using same ISRDirk Brandewie1-2/+8
Add check to make sure that the core is enabled and has outstanding interrupts. The activity bit is masked due to the fact that it will stay active even after the controller has been disabled until the contoller internal state machines have settled. Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-10-29i2c-designware: move controller config to bus specific portion of driverDirk Brandewie3-4/+5
With multiple I2C adapters possible in the system each running at (possibly) different speeds we need to move the controller configuration bit field to the adapter. Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-10-29i2c-designware: move i2c functionality bit field to be adapter specificDirk Brandewie3-6/+11
The functionality of the adapter depends on the configuration of the IP block at silicon compile time and is adapter specific. Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-10-29i2c-designware: Move retriveving the clock speed out of core code.Dirk Brandewie3-1/+10
The clock frequecy supplied to the IP core is specific to a single instance of the driver. This patch makes it possible to have multiple Designware I2C cores in the system possibly running at different core frequencies. Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-10-29i2c-designware: split of i2c-designware.c into core and bus specific partsDirk Brandewie5-343/+412
This patch splits i2c-designware.c into three pieces: i2c-designware-core.c, contains the code that interacts directly with the core. i2c-designware-platdrv.c, contains the code specific to the platform driver using the core. i2c-designware-core.h contains the definitions and declareations shared by i2c-designware-core.c and i2c-designware-platdrv.c. This patch is the first in a set to allow multiple instances of the designware I2C core in the system. Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-10-29i2c-designware: Move checking of IP core version to i2c_dw_init()Dirk Brandewie1-11/+19
Move checking IP core version to i2c_dw_init() in preparation for splitting i2c-designware.c into core and bus specific portions. Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-10-29i2c-designware: Allow mixed endianness accessesJean-Hugues Deschenes1-2/+15
Allows CPUs of a given endianness to access a dw controller of a different endianness. Endianncess difference is detected at run time through the dw component type register. Signed-off-by: Jean-Hugues Deschenes <jean-hugues.deschenes@octasic.com> Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-10-29i2c-designware: Check component type registerJean-Hugues Deschenes1-4/+13
Designware component type register is checked before attaching to the device. Signed-off-by: Jean-Hugues Deschenes <jean-hugues.deschenes@octasic.com> Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-10-29i2c-designware: Use local version of readl & writelJean-Hugues Deschenes1-39/+49
Use local versions of readl & writel, so per-access manipulations may be performed Signed-off-by: Jean-Hugues Deschenes <jean-hugues.deschenes@octasic.com> Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-10-29i2c: irq: Remove IRQF_DISABLEDYong Zhang10-11/+11
Since commit [c58543c8: genirq: Run irq handlers with interrupts disabled], We run all interrupt handlers with interrupts disabled and we even check and yell when an interrupt handler returns with interrupts enabled (see commit [b738a50a: genirq: Warn when handler enables interrupts]). So now this flag is a NOOP and can be removed. Signed-off-by: Yong Zhang <yong.zhang0@gmail.com> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Barry Song <21cnbao@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-10-29I2C: OMAP: remove dev->idle, use usage counting provided by runtime PMKevin Hilman1-20/+39
Current usage of runtime PM is not quite correct. The actual idle/unidle of the I2C hardware should not happen until the runtime PM callbacks are called. Therefore, change omap_i2c_[un]idle() functions to only be called from the runtime PM callbacks (when usage count transitions to/from zero.) Also, the runtime PM core does usage counting and replaces functionality currently managed by the dev->idle flag. Remove usage of dev->idle in favor of using runtime PM, and checking status using pm_runtime_suspended(). Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-10-29I2C: OMAP: remove unneccesary use of pdevKevin Hilman1-15/+7
A pointer to the struct device associated with the i2c device is already kept in the struct omap_i2c_dev, so use omap_i2c_device to find the pointer to struct device. Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-10-29OMAP4: I2C: Enable the wakeup in I2C_WEShubhrajyoti D1-3/+2
Currently for OMAP4 the I2C_WE is not programmed. This patch enables the programming for OMAP4. This patch fixes a bad conflict resolution. This effectively restores the following commit Commit 120bdaa47[i2c-omap: Program I2C_WE on OMAP4 to enable i2c wakeup] which got changed by Commit a3a7acbc[I2C: OMAP2+: address confused probed version naming] Reviewed-by: Felipe Balbi <balbi@ti.com> Reported-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-10-29I2C: OMAP1/OMAP2+: prepend I2C IP version to probed version shown in dev_infoAndy Green1-2/+2
The IP version is prepended to the existing printed probed version as an "epoch" version. Cc: patches@linaro.org Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andy Green <andy.green@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-10-29I2C: OMAP2+: Convert omap I2C driver to use feature implementation flags from platform dataAndy Green1-17/+23
This patch eliminates all cpu_...() tests from the OMAP I2C driver. Instead, it uses the functionality flags in the platform data to make the decisions about product variations the driver needs to handle. Cc: patches@linaro.org Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andy Green <andy.green@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-10-29I2C: OMAP2+: address confused probed version namingAndy Green1-9/+12
The driver reflects the confusion that probed I2C revision from the hardware of 0x40 means it is on an OMAP4430. However, you will probe the same 0x40 ID on an OMAP3530. So this patch changes the name to reflect that. It also clarifies that the original name OMAP_I2C_REV_2 is referring to some ancient OMAP1 revision number, not to be confused with the IP revisions this patch series introduces. Similarly the term "rev" is used in the ancient OMAP1 ISR, the term is changed to use omap1 instead. Cc: patches@linaro.org Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andy Green <andy.green@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Kevin Hilman <khilman@ti.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.