aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/ide/pci (follow)
AgeCommit message (Collapse)AuthorFilesLines
2007-11-13it821x/jmicron: fix return value of {it821x,jmicron}_init_one()Bartlomiej Zolnierkiewicz2-4/+2
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-11-13ide: don't BUG() on unsupported transfer modesBartlomiej Zolnierkiewicz3-5/+2
Fix ide-cris, cs5530, sc1200 and sis5513 host drivers to just return instead of OOPS-ing for unsupported modes in ->set_dma_mode methods. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-11-13cmd64x: don't clear the other channel's interruptSergei Shtylyov1-2/+3
Make sure to not clear the other IDE channel's interrupt when clearing an IDE interrupt via the MRDMODE register. Thanks to Bart for finding a coding mistake. Bart: This fixes regression from commit 66602c83dcb6a5d82772d88ae7a32cd4a1213528 ("cmd64x: use interrupt status from MRDMODE register (take 2)"). Extra thanks to Martin for reporting and bisecting the issue. From: Sergei Shtylyov <sshtylyov@ru.mvista.com> Tested-by: Martin Rogge <marogge@onlinehome.de> Tested-by: Milan Kocian <milon@wq.cz> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-11-05piix: add support for ICH7 on Acer 5602aWLMisebdeg@ngi.it1-0/+1
In piix.c (and in ata_piix.c) are already included some patches to skip the cable check on some laptops and to enable UDMA > 33 modes, but I've noticed than theese doesn't work on my Acer Aspire 5602WLMi (maybe exist more versions of this laptop). With this simple patch I can set transfer mode to UDMA100. From: "sebdeg@ngi.it" <sebdeg@ngi.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-26drivers/ide/pci/sc1200.c: fix suspend/resume buglets and warningsJeff Garzik1-4/+5
* We shouldn't bother with dev->current_state, the PCI API functions we call manage this for us (and do a far better job at it too). * Remove pci_set_power_state(dev, PCI_D0) call in resume, as pci_enable_device() does the same thing. * Check pci_enable_device() return value. If it failed, fail the entire resume and avoid programming timings into the [potentially dead/asleep] chip. Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-26drivers/ide/pci/generic: fix build for CONFIG_HOTPLUG=nBartlomiej Zolnierkiewicz1-1/+1
It turns out that const and __{dev}initdata cannot be mixed currently and that generic IDE PCI host driver is also affected by the same issue: On Thursday 25 October 2007, Ralf Baechle wrote: > CC drivers/ide/pci/generic.o > drivers/ide/pci/generic.c:52: error: __setup_str_ide_generic_all_on causes a > +section type conflict [ Also reported by Martijn Uffing <mp3project@sarijopen.student.utwente.nl>. ] This patch workarounds the problem in a bit hackish way but without removing const from generic_chipsets[] (it adds const to __setup() so __setup_str_ide_generic_all becomes const). Now all __{dev}initdata data in generic IDE PCI host driver are read-only so it builds again (driver's .init.data section gets marked as READONLY). Cc: Martijn Uffing <mp3project@sarijopen.student.utwente.nl> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-26hpt366: fix build for CONFIG_HOTPLUG=nBartlomiej Zolnierkiewicz1-16/+16
On Saturday 20 October 2007, Avuton Olrich wrote: > My randconfig script the attached config caught an error on: > drivers/ide/pci/cy82c693.c:439: error: primary causes a section type conflict > > My git tree: c00046c279a2521075250fad682ca0acc10d4fd7 > > Bisected to: > 8562043606430185cad26d085d46adcc7ad67fd1 is first bad commit > commit 8562043606430185cad26d085d46adcc7ad67fd1 > Author: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> > Date: Sat Oct 20 00:32:34 2007 +0200 > > ide: constify struct ide_port_info > > Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> It turns out that const and __{dev}initdata cannot be mixed currently and that hpt366 host driver is also affected by the same issue: > drivers/ide/pci/hpt366.c:1428: error: hpt366_chipsets causes a section type > conflict This patch workarounds the problem by making static struct hpt_info instances const. Now all __devinitdata data in hpt366 host driver are read-only so it builds again (driver's .init.data section gets marked as READONLY). While at it: * Bump driver version. Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: "Avuton Olrich" <avuton@gmail.com> Cc: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-26cy82c693: fix build for CONFIG_HOTPLUG=nBartlomiej Zolnierkiewicz1-3/+3
On Saturday 20 October 2007, Avuton Olrich wrote: > My randconfig script the attached config caught an error on: > drivers/ide/pci/cy82c693.c:439: error: primary causes a section type conflict > > My git tree: c00046c279a2521075250fad682ca0acc10d4fd7 > > Bisected to: > 8562043606430185cad26d085d46adcc7ad67fd1 is first bad commit > commit 8562043606430185cad26d085d46adcc7ad67fd1 > Author: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> > Date: Sat Oct 20 00:32:34 2007 +0200 > > ide: constify struct ide_port_info > > Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> It turns out that const and __{dev}initdata cannot be mixed currently. This patch workarounds the problem by removing __devinitdata tag from 'primary' variable (which makes 'primary' to be moved from .init.data to .bss section). Now all __devinitdata data in cy82c693 host driver are read-only so it builds again (driver's .init.data section gets marked as READONLY). While at it: * Move 'primary' variable to its only user, init_iops_cy82c693(). * Bump driver version. Cc: "Avuton Olrich" <avuton@gmail.com> Cc: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivialLinus Torvalds2-3/+3
* git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial: (74 commits) fix do_sys_open() prototype sysfs: trivial: fix sysfs_create_file kerneldoc spelling mistake Documentation: Fix typo in SubmitChecklist. Typo: depricated -> deprecated Add missing profile=kvm option to Documentation/kernel-parameters.txt fix typo about TBI in e1000 comment proc.txt: Add /proc/stat field small documentation fixes Fix compiler warning in smount example program from sharedsubtree.txt docs/sysfs: add missing word to sysfs attribute explanation documentation/ext3: grammar fixes Documentation/java.txt: typo and grammar fixes Documentation/filesystems/vfs.txt: typo fix include/asm-*/system.h: remove unused set_rmb(), set_wmb() macros trivial copy_data_pages() tidy up Fix typo in arch/x86/kernel/tsc_32.c file link fix for Pegasus USB net driver help remove unused return within void return function Typo fixes retrun -> return x86 hpet.h: remove broken links ...
2007-10-20cs5530: remove needless ide_lock takingBartlomiej Zolnierkiewicz1-7/+1
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20ide: take ide_lock for prefetch disable/enable in do_special()Bartlomiej Zolnierkiewicz1-6/+0
Take ide_lock for prefetch disable/enable in do_special(), then cleanup cmd640 and ht6560b host drivers. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20cmd640: fix deadlock on error handlingBartlomiej Zolnierkiewicz1-20/+28
Stop abusing ide_lock lock (switch to a private locking). Fixes same issue as fixed by Alan Cox in atiixp host driver with commit 6c5f8cc33eb2e10b6ab788bbe259fc142a068627. cmd640 is a bit special cause we still need to leave ide_lock for ->set_pio_mode with 'pio' argument == 8/9 (prefetch disable/enable). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20slc90e66: fix deadlock on error handlingBartlomiej Zolnierkiewicz1-3/+5
* Stop abusing ide_lock lock (switch to a private locking). Fixes same issue as fixed by Alan Cox in atiixp host driver with commit 6c5f8cc33eb2e10b6ab788bbe259fc142a068627. * Bump driver version. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20opti621: fix deadlock on error handlingBartlomiej Zolnierkiewicz1-3/+5
* Stop abusing ide_lock lock (switch to a private locking). Fixes same issue as fixed by Alan Cox in atiixp host driver with commit 6c5f8cc33eb2e10b6ab788bbe259fc142a068627. * Bump driver version. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20ide: constify struct ide_port_infoBartlomiej Zolnierkiewicz32-39/+39
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20ide: replace ide_pci_device_t by struct ide_port_infoBartlomiej Zolnierkiewicz32-55/+51
* Rename struct ide_pci_device_s to struct ide_port_info. * Remove ide_pci_device_t typedef. While at it: * Fix __ide_pci_register_driver() comment. * Fix aec62xx_init_one() comment. * Remove unused 'cds' field from ide_hwgroup_t. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20via82cxxx: keep local ide_pci_device_t copyBartlomiej Zolnierkiewicz1-35/+27
* Keep local ide_pci_device_t copy in via_init_one(). * Adjust ide_pci_device_t copy according to id->driver_data in via_init_one() and remove no longer needed second via82cxxx_chipsets[] entry. * via82cxxx_chipsets[] -> via82cxxx_chipset. * Remove IDE_HFLAGS_VIA define. * Bump driver version. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20ide: remove write-only hwif->hwBartlomiej Zolnierkiewicz2-11/+8
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20ide: add ide_device_add()Bartlomiej Zolnierkiewicz2-23/+7
* Add ide_device_add() helper and convert host drivers to use it instead of open-coded variants. * Make ide_pci_setup_ports() and do_ide_setup_pci_device() take 'u8 *idx' argument instead of 'ata_index_t *index'. * Remove no longer needed ata_index_t. * Unexport probe_hwif_init() and make it static. * Unexport ide_proc_register_port(). There should be no functionality changes caused by this patch (sgiioc4.c: ide_proc_register_port() requires hwif->present to be set and it won't be set if probe_hwif_init() fails). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20ide: add ->fixup method to ide_hwif_tBartlomiej Zolnierkiewicz1-1/+1
* Add ->fixup method to ide_hwif_t. * Set hwif->fixup in ide_pci_setup_ports() to d->fixup. * Use hwif->fixup in probe_hwif(). * Use probe_hwif_init() instead of probe_hwif_init_with_fixup() in ide_setup_pci_device(). * Add 'fixup' argument to ide_register_hw() and use it to set hwif->fixup, update all ide_register_hw() users accordingly. * Convert ide-cs/delkin_cb host drivers to use ide_register_hw(). * Restore hwif->fixup in ide_hwif_restore(). * Remove ide_register_hw_with_fixup(), probe_hwif_init_with_fixup() and 'fixup' argument from probe_hwif(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20siimage: separate PATA and SATA methodsBartlomiej Zolnierkiewicz1-40/+39
* Split off sil_sata_udma_filter() from sil_udma_filter() and rename sil_udma_filter() to sil_pata_udma_filter(). * Rename siimage_busproc() to sil_sata_busproc(). * Rename siimage_reset_poll() to sil_sata_reset_poll() and in init_hwif_siimage() set ->reset_poll method only for SATA controllers. * Rename siimage_pre_reset() to sil_sata_pre_reset(), in init_hwif_siimage() set ->pre_reset method only for SATA controllers and remove redundant is_sata() call. * Add CONFIG_BLK_DEV_IDE_SATA #ifdef/#endif to pdev_is_sata() so compiler will know to throw out unused SATA code for CONFIG_BLK_DEV_IDE_SATA=n case (830 bytes saved on x86-32). * Bump driver version. Some minor cleanups while at it: * Convert sil_{pata,sata}_udma_filter() to use ATA_UDMA* defines. * In siimage_mmio_ide_dma_test_irq() move 'base' variable under 'if (SATA_ERROR_REG)' block. * Simplify sil_sata_reset_poll() a bit. * Cache is_sata() result in init_hwif_siimage() Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20aec62xx: remove aec62xx_dma_lost_irq()Bartlomiej Zolnierkiewicz1-16/+1
* Remove aec62xx_dma_lost_irq() (generic ide_dma_lost_irq() will be used now). * Bump driver version. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20alim15x3: use ->host_flags and ->udma_mask fields from ide_pci_device_tBartlomiej Zolnierkiewicz1-26/+23
* Make a local copy of ali15x3_chipset in alim15x3_init_one() and set ->host_flags / ->udma_mask according to the controller capabilities. * Cleanup init_hwif_common_ali15x3(). * Bump driver version. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20alim15x3: fix CD_ROM DMA and PIO FIFO settings setupBartlomiej Zolnierkiewicz1-29/+31
* Setup CD_ROM DMA and PIO FIFO settings in init_chipset_ali15x3() instead of ata66_ali15x3(). The latter is called from init_hwif_common_ali15x3() only if DMA base exists (which insists m5529_revision > 0x20). This changes makes CD_ROM DMA / PIO FIFO bits being set only once and also when "idex=ata66" kernel parameter is used. * While at it move also chip_is_1543c_e setup from ata66_ali15x3() to init_chipset_ali15x3() and check if isa_dev exists before accessing it. * Bump driver version. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20ide: add IDE_HFLAG_{IO_32BIT,UNMASK_IRQS} host flagsBartlomiej Zolnierkiewicz3-40/+28
Add IDE_HFLAG_{IO_32BIT,UNMASK_IRQS} host flag to tell ide_pci_setup_ports() to set drive->{io_32bit,unmask} for both drives on the interface. Convert amd74xx, sl82c105 and via82cxxx host drivers to use these new host flags. While at it: * Add IDE_HFLAGS_AMD define (amd74xx host driver). * Add IDE_HFLAGS_VIA define (via82cxxx host driver). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20ide: add IDE_HFLAG_RQSIZE_256 host flagBartlomiej Zolnierkiewicz1-12/+6
Add IDE_HFLAG_RQSIZE_256 host flag to tell ide_pci_setup_ports() to set hwif->rqsize to 256 sectors. Convert pdc202xx_old host driver to use it. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20ide: add IDE_HFLAG_FORCE_LEGACY_IRQS host flagBartlomiej Zolnierkiewicz2-30/+17
Add IDE_HFLAG_FORCE_LEGACY_IRQS host flag to tell ide_pci_setup_ports() to always set hwif->irq to legacy IRQ 14/15 and convert generic IDE PCI and via82cxxx host drivers to use it. While at it: * Add IDE_HFLAGS_UMC define (generic IDE PCI host driver). * Remove no longer needed init_hwif_generic() (generic IDE PCI host driver). * Set d->udma_mask instead of hwif->ultra_mask (via82cxxx host driver). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20ide: add ->chipset field to ide_pci_device_tBartlomiej Zolnierkiewicz4-6/+4
Add ->chipset field to ide_pci_device_t and use it in ide_hwif_configure() to set hwif->chipset. Convert cmd64x, cy82c693, rz1000 and trm290 host drivers to use this new ability. While at it define hwif_chipset_t as u8 to save some space in hw_regs_t, ide_hwif_t and ide_pci_device_t instances. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20serverworks: remove dead code from svwks_set_dma_mode()Bartlomiej Zolnierkiewicz1-7/+0
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20rz1000: set serialized flag only if mate interface existsBartlomiej Zolnierkiewicz1-1/+2
Setting hwif->serialized makes sense only if the mate interface exists. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20cmd64x: always set hwif->chipset for CMD646Bartlomiej Zolnierkiewicz1-1/+3
hwif->chipset should be set to ide_cmd646 also when DMA base is invalid. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20ide/pci/sis5513.c: add missing "else"Adrian Bunk1-1/+1
This patch adds a missing "else" that was missing in commit c77a89cd98d99819f23a4a08e5e17ee1f13f6e4d. Spotted by the Coverity checker. Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>, Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-19Fix misspellings of "system", "controller", "interrupt" and "necessary".Robert P. J. Day2-3/+3
Fix the various misspellings of "system", controller", "interrupt" and "[un]necessary". Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Adrian Bunk <bunk@kernel.org>
2007-10-19ide: set drive->autotune in ide_pci_setup_ports()Bartlomiej Zolnierkiewicz28-74/+0
Majority of host drivers using IDE PCI layer set drive->autotune, the only exceptions are: generic.c ns87415.c rz1000.c trm290.c * no ->set_pio_mode method it821x.c: * if memory allocation fails drive->autotune won't be set (but there also won't be ->set_pio_mode method in such case) piix.c: * MPIIX controller (no ->init_hwif method so also no ->set_pio_mode method) However if there is no ->set_pio_mode method there are no changes in behavior w.r.t. PIO tuning so always set drive->autotune in ide_pci_setup_ports(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-19triflex: always tune PIOBartlomiej Zolnierkiewicz1-0/+3
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-19opti621: always tune PIOBartlomiej Zolnierkiewicz1-4/+4
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-19cy82c693: always tune PIOBartlomiej Zolnierkiewicz1-5/+5
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-19cs5520: always tune PIOBartlomiej Zolnierkiewicz1-3/+4
Since cs5520 uses VDMA best PIO mode was tuned anyway by ide_dma_check() but only if DMA was successfully initialized. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-19alim15x3: always tune PIOBartlomiej Zolnierkiewicz1-5/+5
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-19ide: add IDE_HFLAG_LEGACY_IRQS host flagBartlomiej Zolnierkiewicz5-35/+23
Add IDE_HFLAG_LEGACY_IRQS host flag to tell ide_pci_setup_ports() to set hwif->irq to legacy IRQ 14/15 (iff hwif->irq is not already set) and convert atiixp, piix, serverworks, sis5513 and slc90e66 host drivers to use it. While at it: * In piix.c add IDE_HFLAGS_PIIX define and don't use ->init_hwif for MPIIX. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-19ide: add IDE_HFLAG_SERIALIZE host flagBartlomiej Zolnierkiewicz3-13/+11
Add IDE_HFLAG_SERIALIZE host flag to tell ide_pci_setup_ports() to set hwif/mate->serialized and convert aec62xx, cs5530 and sc1200 host drivers to use it. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-19ide: add IDE_HFLAG_ERROR_STOPS_FIFO host flagBartlomiej Zolnierkiewicz2-6/+5
Add IDE_HFLAG_ERROR_STOPS_FIFO host flag and use it instead of hwif->err_stops_fifo. As a side-effect this change fixes hwif->err_stops_fifo not being restored by ide_hwif_restore(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-19piix: add DECLARE_ICH_DEV() macroBartlomiej Zolnierkiewicz1-63/+47
Add DECLARE_ICH_DEV() macro. While at it: * Add init_hwif_ich() (->init_hwif method) for ICH controllers. * Rename init_chipset_piix() to init_chipset_ich() and use it only for ICH controllers. * Remove no longer needed piix_is_ichx() helper. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-19pdc202xx_old: add DECLARE_PDC2026X_DEV() macroBartlomiej Zolnierkiewicz1-41/+19
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-19pdc202xx_new: add DECLARE_PDCNEW_DEV() macroBartlomiej Zolnierkiewicz1-57/+19
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-19aec62xx: no need to disable UDMA in ->init_hwif method for ATP850UFBartlomiej Zolnierkiewicz1-9/+5
* No need to disable UDMA in ->init_hwif method for ATP850UF (and since we now always tune PIO it will be disabled by ->set_pio_mode calls anyway). * Bump driver version. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-19serverworks: remove ->init_setupBartlomiej Zolnierkiewicz1-31/+14
Merge init_setup_{svwks,csb6}() into svwks_init_one(). While at it: * Remove redundant dev->device checks. * Operate on a local copy of serverworks_chipsets[] entry. * Use pci_resource_start(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-19scc_pata: remove ->init_setupBartlomiej Zolnierkiewicz1-2/+2
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-19pdc202xx_old: remove ->init_setupBartlomiej Zolnierkiewicz1-32/+25
* Split off pdc202ata4_fixup_irq() helper from init_setup_pdc202ata4(). * Merge init_setup_{pdc202ata4,pdc20265,pdc202xx}() into pdc202xx_init_one(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-19pdc202xx_new: remove ->init_setupBartlomiej Zolnierkiewicz1-59/+49
* Split off pdc20270_get_dev2() helper from init_setup_pdc20270(). * Merge init_setup_{pdcnew,pdc20270,pdc20276}() into pdc202new_init_one(). While at it: * Change KERN_ level of interrupt fixup message from KERN_WARNING to KERN_INFO. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.