aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/ide (follow)
AgeCommit message (Collapse)AuthorFilesLines
2007-10-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds5-24/+28
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: ide: add SH-S202J to ivb_list[] drivers/ide/pci/sc1200.c: fix suspend/resume buglets and warnings drivers/ide/pci/generic: fix build for CONFIG_HOTPLUG=n hpt366: fix build for CONFIG_HOTPLUG=n cy82c693: fix build for CONFIG_HOTPLUG=n
2007-10-27ide/arm/icside: fallout from commit 86f3a492bb09eee5745b93af35f2212179c251fdAl Viro1-8/+8
struct device doesn't have ->dma; it's in struct expansion_card where that struct device is embedded into. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-26ide: add SH-S202J to ivb_list[]Bartlomiej Zolnierkiewicz1-0/+3
From the report by Nick Warne. Tested-by: Nick Warne <nick@ukfsn.org> Cc: Lennart Sorensen <lsorense@csclub.uwaterloo.ca> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-26drivers/ide/pci/sc1200.c: fix suspend/resume buglets and warningsJeff Garzik1-4/+5
* We shouldn't bother with dev->current_state, the PCI API functions we call manage this for us (and do a far better job at it too). * Remove pci_set_power_state(dev, PCI_D0) call in resume, as pci_enable_device() does the same thing. * Check pci_enable_device() return value. If it failed, fail the entire resume and avoid programming timings into the [potentially dead/asleep] chip. Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-26drivers/ide/pci/generic: fix build for CONFIG_HOTPLUG=nBartlomiej Zolnierkiewicz1-1/+1
It turns out that const and __{dev}initdata cannot be mixed currently and that generic IDE PCI host driver is also affected by the same issue: On Thursday 25 October 2007, Ralf Baechle wrote: > CC drivers/ide/pci/generic.o > drivers/ide/pci/generic.c:52: error: __setup_str_ide_generic_all_on causes a > +section type conflict [ Also reported by Martijn Uffing <mp3project@sarijopen.student.utwente.nl>. ] This patch workarounds the problem in a bit hackish way but without removing const from generic_chipsets[] (it adds const to __setup() so __setup_str_ide_generic_all becomes const). Now all __{dev}initdata data in generic IDE PCI host driver are read-only so it builds again (driver's .init.data section gets marked as READONLY). Cc: Martijn Uffing <mp3project@sarijopen.student.utwente.nl> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-26hpt366: fix build for CONFIG_HOTPLUG=nBartlomiej Zolnierkiewicz1-16/+16
On Saturday 20 October 2007, Avuton Olrich wrote: > My randconfig script the attached config caught an error on: > drivers/ide/pci/cy82c693.c:439: error: primary causes a section type conflict > > My git tree: c00046c279a2521075250fad682ca0acc10d4fd7 > > Bisected to: > 8562043606430185cad26d085d46adcc7ad67fd1 is first bad commit > commit 8562043606430185cad26d085d46adcc7ad67fd1 > Author: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> > Date: Sat Oct 20 00:32:34 2007 +0200 > > ide: constify struct ide_port_info > > Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> It turns out that const and __{dev}initdata cannot be mixed currently and that hpt366 host driver is also affected by the same issue: > drivers/ide/pci/hpt366.c:1428: error: hpt366_chipsets causes a section type > conflict This patch workarounds the problem by making static struct hpt_info instances const. Now all __devinitdata data in hpt366 host driver are read-only so it builds again (driver's .init.data section gets marked as READONLY). While at it: * Bump driver version. Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: "Avuton Olrich" <avuton@gmail.com> Cc: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-26cy82c693: fix build for CONFIG_HOTPLUG=nBartlomiej Zolnierkiewicz1-3/+3
On Saturday 20 October 2007, Avuton Olrich wrote: > My randconfig script the attached config caught an error on: > drivers/ide/pci/cy82c693.c:439: error: primary causes a section type conflict > > My git tree: c00046c279a2521075250fad682ca0acc10d4fd7 > > Bisected to: > 8562043606430185cad26d085d46adcc7ad67fd1 is first bad commit > commit 8562043606430185cad26d085d46adcc7ad67fd1 > Author: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> > Date: Sat Oct 20 00:32:34 2007 +0200 > > ide: constify struct ide_port_info > > Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> It turns out that const and __{dev}initdata cannot be mixed currently. This patch workarounds the problem by removing __devinitdata tag from 'primary' variable (which makes 'primary' to be moved from .init.data to .bss section). Now all __devinitdata data in cy82c693 host driver are read-only so it builds again (driver's .init.data section gets marked as READONLY). While at it: * Move 'primary' variable to its only user, init_iops_cy82c693(). * Bump driver version. Cc: "Avuton Olrich" <avuton@gmail.com> Cc: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-23ide: build fixFUJITA Tomonori1-0/+1
git-drivers/ide/ide-probe.c: In function 'hwif_init': drivers/ide/ide-probe.c:1327: error: implicit declaration of function 'sg_init_table' Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-22[SG] Update drivers to use sg helpersJens Axboe4-8/+8
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivialLinus Torvalds5-8/+8
* git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial: (74 commits) fix do_sys_open() prototype sysfs: trivial: fix sysfs_create_file kerneldoc spelling mistake Documentation: Fix typo in SubmitChecklist. Typo: depricated -> deprecated Add missing profile=kvm option to Documentation/kernel-parameters.txt fix typo about TBI in e1000 comment proc.txt: Add /proc/stat field small documentation fixes Fix compiler warning in smount example program from sharedsubtree.txt docs/sysfs: add missing word to sysfs attribute explanation documentation/ext3: grammar fixes Documentation/java.txt: typo and grammar fixes Documentation/filesystems/vfs.txt: typo fix include/asm-*/system.h: remove unused set_rmb(), set_wmb() macros trivial copy_data_pages() tidy up Fix typo in arch/x86/kernel/tsc_32.c file link fix for Pegasus USB net driver help remove unused return within void return function Typo fixes retrun -> return x86 hpet.h: remove broken links ...
2007-10-20ide: remove inclusion of non-existent io_trace.hRobert P. J. Day1-1/+0
Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Cc: gadio@netvision.net.il Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20ide-disk: add get_smart_data() helperBartlomiej Zolnierkiewicz1-20/+4
Merge get_smart_values() and get_smart_thresholds() into get_smart_data() helper. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20ide: fix ->data_phase in taskfile_load_raw()Bartlomiej Zolnierkiewicz1-1/+1
It should be TASKFILE_NO_DATA, not TASKFILE_IN. Luckily ATM ->data_phase is unused if ->command_type == IDE_DRIVE_TASK_NO_DATA but this may change in the future. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20ide: check drive->using_dma in flagged_taskfile()Bartlomiej Zolnierkiewicz1-0/+3
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20ide: check ->dma_setup() return value in flagged_taskfile()Bartlomiej Zolnierkiewicz1-4/+7
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20dtc2278: note on docsAlan Cox1-0/+2
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20qd65xx: remove pointless qd_{read,write}_reg() (take 2)Bartlomiej Zolnierkiewicz1-34/+12
These functions are atomic so locking is pointless (noticed by Sergei). v2: We can now just use local_irq_save/restore() in qd_testreg() (noticed by Jeff). Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Acked-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20ide: PCI BMDMA initialization fixes (take 2)Bartlomiej Zolnierkiewicz1-22/+10
* Set hwif->dma_base only if allocation of extra ports succeeds. While at it: * Move setting of hwif->dma_{base,master} from ide_{mapped_mmio,iomio}_dma() to ide_setup_dma(). * Rename 'dma_base' argument to 'base' in ide_setup_dma() (to make the code obey 80-columns limit and increase its readability). * Remove stale ide_setup_dma() comment. v2: * Change to allocate hwif->dmatable_cpu before reserving I/O ports missed teardown code (spotted by Sergei). On the second thought this change is actually unnecessary so revert it in v2. * Make ide_release_dma_engine() void and remove needless comment. Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20ide: remove stale comments from ide-taskfile.cBartlomiej Zolnierkiewicz1-23/+0
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20ide: remove dead code from ide_driveid_update()Bartlomiej Zolnierkiewicz1-23/+3
* Remove dead code from ide_driveid_update(). While at it: * Remove useless comment. * s/HWIF(drive)/drive->hwif/ Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20ide: use __ide_end_request() in ide_end_dequeued_request()Bartlomiej Zolnierkiewicz1-34/+10
* Remove dead code for handling IDE TCQ from ide_end_dequeued_request(). * Add 'dequeue' parameter to __ide_end_request(). * Use __ide_end_request() in ide_end_dequeued_request(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20ide: enhance ide_setup_pci_noise()Bartlomiej Zolnierkiewicz1-5/+3
* Print PCI device Vendor ID, Device ID and revision in ide_setup_pci_noise(). * Remove no longer needed PCI device revision printing from ide_setup_pci_controller(). Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20cs5530: remove needless ide_lock takingBartlomiej Zolnierkiewicz1-7/+1
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20ide: take ide_lock for prefetch disable/enable in do_special()Bartlomiej Zolnierkiewicz3-12/+14
Take ide_lock for prefetch disable/enable in do_special(), then cleanup cmd640 and ht6560b host drivers. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20ht6560b: fix deadlock on error handlingBartlomiej Zolnierkiewicz1-13/+18
Stop abusing ide_lock lock (switch to a private locking). Fixes same issue as fixed by Alan Cox in atiixp host driver with commit 6c5f8cc33eb2e10b6ab788bbe259fc142a068627. ht6560b is a bit special cause we still need to leave ide_lock for ->set_pio_mode with 'pio' argument == 8/9 (prefetch disable/enable). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20cmd640: fix deadlock on error handlingBartlomiej Zolnierkiewicz1-20/+28
Stop abusing ide_lock lock (switch to a private locking). Fixes same issue as fixed by Alan Cox in atiixp host driver with commit 6c5f8cc33eb2e10b6ab788bbe259fc142a068627. cmd640 is a bit special cause we still need to leave ide_lock for ->set_pio_mode with 'pio' argument == 8/9 (prefetch disable/enable). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20slc90e66: fix deadlock on error handlingBartlomiej Zolnierkiewicz1-3/+5
* Stop abusing ide_lock lock (switch to a private locking). Fixes same issue as fixed by Alan Cox in atiixp host driver with commit 6c5f8cc33eb2e10b6ab788bbe259fc142a068627. * Bump driver version. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20opti621: fix deadlock on error handlingBartlomiej Zolnierkiewicz1-3/+5
* Stop abusing ide_lock lock (switch to a private locking). Fixes same issue as fixed by Alan Cox in atiixp host driver with commit 6c5f8cc33eb2e10b6ab788bbe259fc142a068627. * Bump driver version. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20qd65xx: fix deadlock on error handlingBartlomiej Zolnierkiewicz1-8/+9
Stop abusing ide_lock lock (switch to a private locking). Fixes same issue as fixed by Alan Cox in atiixp host driver with commit 6c5f8cc33eb2e10b6ab788bbe259fc142a068627. Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20dtc2278: fix deadlock on error handlingBartlomiej Zolnierkiewicz1-2/+4
Stop abusing ide_lock lock (switch to a private locking). Fixes same issue as fixed by Alan Cox in atiixp host driver with commit 6c5f8cc33eb2e10b6ab788bbe259fc142a068627. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20ali14xx: fix deadlock on error handlingBartlomiej Zolnierkiewicz1-2/+4
Stop abusing ide_lock lock by switching to a private locking. Fixes same issue as fixed by Alan Cox in atiixp host driver with commit 6c5f8cc33eb2e10b6ab788bbe259fc142a068627. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20ide: constify struct ide_port_infoBartlomiej Zolnierkiewicz33-53/+53
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20ide: replace ide_pci_device_t by struct ide_port_infoBartlomiej Zolnierkiewicz33-99/+89
* Rename struct ide_pci_device_s to struct ide_port_info. * Remove ide_pci_device_t typedef. While at it: * Fix __ide_pci_register_driver() comment. * Fix aec62xx_init_one() comment. * Remove unused 'cds' field from ide_hwgroup_t. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20via82cxxx: keep local ide_pci_device_t copyBartlomiej Zolnierkiewicz1-35/+27
* Keep local ide_pci_device_t copy in via_init_one(). * Adjust ide_pci_device_t copy according to id->driver_data in via_init_one() and remove no longer needed second via82cxxx_chipsets[] entry. * via82cxxx_chipsets[] -> via82cxxx_chipset. * Remove IDE_HFLAGS_VIA define. * Bump driver version. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20dtc2278: set ->pio_mask also for the second portBartlomiej Zolnierkiewicz1-0/+1
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20au1xxx-ide: set ->autotune and ->no_io_32bit also for the slave deviceBartlomiej Zolnierkiewicz1-1/+3
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20ide: remove write-only hwif->hwBartlomiej Zolnierkiewicz10-50/+40
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20ide: add hwif->ack_intr hookBartlomiej Zolnierkiewicz2-2/+3
* Add hwif->ack_intr hook and use it instead of hwif->hw.ack_intr. * Add missing brackets to cris-v32 and powerpc ide_ack_intr() macros. Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20icside: use ec->dma directlyBartlomiej Zolnierkiewicz6-16/+11
* hwif->hwif_data contains pointer to struct expansion_card so use ec->dma directly instead of caching it in hwif->hw.dma. * Remove no longer needed hw_regs_t.dma and NO_DMA define. Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20ide: fix ide_register_hw() to check hwif->io_ports[]Bartlomiej Zolnierkiewicz1-2/+2
hwif->hw.io_ports[] and hwif->io_ports[] should be the same but "4drives" support and scc_pata host driver set only hwif->io_ports[]. To compensate for this check hwif->io_ports[] instead of hwif->hw.io_ports[] in ide_register_hw() (instead of fixing "4drives" and scc_pata because hwif->hw is to be removed). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20ide: add CONFIG_IDE_ARCH_OBSOLETE_INITBartlomiej Zolnierkiewicz2-1/+4
Add CONFIG_IDE_ARCH_OBSOLETE_INIT to drivers/ide/Kconfig and use it instead of defining IDE_ARCH_OBSOLETE_INIT in <arch/ide.h>. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20ide: add ide_find_port() helperBartlomiej Zolnierkiewicz4-62/+36
* Add ide_find_port() helper. * Convert icside, rapide and ide_platform host drivers to use it. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20ide: add ide_device_add()Bartlomiej Zolnierkiewicz17-134/+89
* Add ide_device_add() helper and convert host drivers to use it instead of open-coded variants. * Make ide_pci_setup_ports() and do_ide_setup_pci_device() take 'u8 *idx' argument instead of 'ata_index_t *index'. * Remove no longer needed ata_index_t. * Unexport probe_hwif_init() and make it static. * Unexport ide_proc_register_port(). There should be no functionality changes caused by this patch (sgiioc4.c: ide_proc_register_port() requires hwif->present to be set and it won't be set if probe_hwif_init() fails). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20ide: add ->fixup method to ide_hwif_tBartlomiej Zolnierkiewicz15-42/+34
* Add ->fixup method to ide_hwif_t. * Set hwif->fixup in ide_pci_setup_ports() to d->fixup. * Use hwif->fixup in probe_hwif(). * Use probe_hwif_init() instead of probe_hwif_init_with_fixup() in ide_setup_pci_device(). * Add 'fixup' argument to ide_register_hw() and use it to set hwif->fixup, update all ide_register_hw() users accordingly. * Convert ide-cs/delkin_cb host drivers to use ide_register_hw(). * Restore hwif->fixup in ide_hwif_restore(). * Remove ide_register_hw_with_fixup(), probe_hwif_init_with_fixup() and 'fixup' argument from probe_hwif(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20siimage: separate PATA and SATA methodsBartlomiej Zolnierkiewicz1-40/+39
* Split off sil_sata_udma_filter() from sil_udma_filter() and rename sil_udma_filter() to sil_pata_udma_filter(). * Rename siimage_busproc() to sil_sata_busproc(). * Rename siimage_reset_poll() to sil_sata_reset_poll() and in init_hwif_siimage() set ->reset_poll method only for SATA controllers. * Rename siimage_pre_reset() to sil_sata_pre_reset(), in init_hwif_siimage() set ->pre_reset method only for SATA controllers and remove redundant is_sata() call. * Add CONFIG_BLK_DEV_IDE_SATA #ifdef/#endif to pdev_is_sata() so compiler will know to throw out unused SATA code for CONFIG_BLK_DEV_IDE_SATA=n case (830 bytes saved on x86-32). * Bump driver version. Some minor cleanups while at it: * Convert sil_{pata,sata}_udma_filter() to use ATA_UDMA* defines. * In siimage_mmio_ide_dma_test_irq() move 'base' variable under 'if (SATA_ERROR_REG)' block. * Simplify sil_sata_reset_poll() a bit. * Cache is_sata() result in init_hwif_siimage() Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20aec62xx: remove aec62xx_dma_lost_irq()Bartlomiej Zolnierkiewicz1-16/+1
* Remove aec62xx_dma_lost_irq() (generic ide_dma_lost_irq() will be used now). * Bump driver version. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20alim15x3: use ->host_flags and ->udma_mask fields from ide_pci_device_tBartlomiej Zolnierkiewicz1-26/+23
* Make a local copy of ali15x3_chipset in alim15x3_init_one() and set ->host_flags / ->udma_mask according to the controller capabilities. * Cleanup init_hwif_common_ali15x3(). * Bump driver version. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20alim15x3: fix CD_ROM DMA and PIO FIFO settings setupBartlomiej Zolnierkiewicz1-29/+31
* Setup CD_ROM DMA and PIO FIFO settings in init_chipset_ali15x3() instead of ata66_ali15x3(). The latter is called from init_hwif_common_ali15x3() only if DMA base exists (which insists m5529_revision > 0x20). This changes makes CD_ROM DMA / PIO FIFO bits being set only once and also when "idex=ata66" kernel parameter is used. * While at it move also chip_is_1543c_e setup from ata66_ali15x3() to init_chipset_ali15x3() and check if isa_dev exists before accessing it. * Bump driver version. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20ide: add IDE_HFLAG_{IO_32BIT,UNMASK_IRQS} host flagsBartlomiej Zolnierkiewicz4-40/+38
Add IDE_HFLAG_{IO_32BIT,UNMASK_IRQS} host flag to tell ide_pci_setup_ports() to set drive->{io_32bit,unmask} for both drives on the interface. Convert amd74xx, sl82c105 and via82cxxx host drivers to use these new host flags. While at it: * Add IDE_HFLAGS_AMD define (amd74xx host driver). * Add IDE_HFLAGS_VIA define (via82cxxx host driver). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20ide: add IDE_HFLAG_RQSIZE_256 host flagBartlomiej Zolnierkiewicz2-12/+9
Add IDE_HFLAG_RQSIZE_256 host flag to tell ide_pci_setup_ports() to set hwif->rqsize to 256 sectors. Convert pdc202xx_old host driver to use it. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.