aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/ide (follow)
AgeCommit message (Collapse)AuthorFilesLines
2008-01-26ide: merge ->dma_host_{on,off} methods into ->dma_host_set methodBartlomiej Zolnierkiewicz13-101/+42
Merge ->dma_host_{on,off} methods into ->dma_host_set method which takes 'int on' argument. There should be no functionality changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26ide: move drive->using_dma check to callers of ->dma_host_on methodBartlomiej Zolnierkiewicz4-5/+5
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26atiixp: remove ->dma_host_on and ->dma_host_off methodsBartlomiej Zolnierkiewicz1-53/+18
* Enable/disable UDMA in atiixp_set_dma_mode(). * Remove no longer needed atiixp_dma_host_{on,off}() and save_mdma_mode[]. * Bump driver version. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26ide-cris: fix DMA methodsBartlomiej Zolnierkiewicz1-11/+7
* Rename cris_dma_{on,off}() to cris_dma_host_{on,off}(). * Remove no longer needed ->dma_off_quietly (IDE core has the needed code now). * Make cris_dma_host_on() void. I left fixing ide-cris after "kill dma_on/dma_off_quietly() methods" patch because: * Currently this driver is broken: cris_dma_on() (returns 'int') is assigned to hwif->dma_host_on (returns 'void') so the driver won't build. * ->ide_dma_on method was missing so the driver OOPS-es on attempt to enable DMA. * drive->using_dma was never set/cleared so DMA wouldn't be used anyway. Unfortunately it seems that ide-cris stays broken even after this patch: * V10: <asm/arch-v10/ide.h> needs fixing - ide_init_default_hwifs() should be removed (IDE core no longer uses it) - same for ide_init_hwif_ports() and ide_default_{irq,io_base}() (they shouldn't be needed for ide-cris host driver) * V32: I'm unable to find a place which defines ETRAX_ARCH_V32 but I'm leaving fixing this to CRIS gurus. :) Cc: Mikael Starvik <starvik@axis.com> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26ide: remove ->ide_dma_on and ->dma_off_quietly methods from ide_hwif_tBartlomiej Zolnierkiewicz10-82/+24
* Make ide_dma_off_quietly() and __ide_dma_on() always available. * Drop "__" prefix from __ide_dma_on(). * Check for presence of ->dma_host_on instead of ->ide_dma_on. * Convert all users of ->ide_dma_on and ->dma_off_quietly methods to use ide_dma_on() and ide_dma_off_quietly() instead. * Remove no longer needed ->ide_dma_on and ->dma_off_quietly methods from ide_hwif_t. * Make ide_dma_on() void. There should be no functionality changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26au1xxx-ide: add ide_toggle_bounce() callsBartlomiej Zolnierkiewicz1-0/+2
Add ide_toggle_bounce() call to ->ide_dma_on/->dma_off_quietly methods so they match generic __ide_dma_on()/ide_dma_off_quietly(). Since there is no PCI device there should be no functionality changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26icside: add ide_toggle_bounce() callsBartlomiej Zolnierkiewicz1-0/+2
Add ide_toggle_bounce() call to ->ide_dma_on/->dma_off_quietly methods so they match generic __ide_dma_on()/ide_dma_off_quietly(). Since there is no PCI device there should be no functionality changes caused by this patch. Cc: Russell King <rmk@arm.linux.org.uk> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26sgiioc4: add ide_toggle_bounce() callsBartlomiej Zolnierkiewicz1-0/+2
Add ide_toggle_bounce() call to ->ide_dma_on/->dma_off_quietly methods so they match generic __ide_dma_on()/ide_dma_off_quietly(). Tested on Altix by Jeremy. Acked-by: Jeremy Higdon <jeremy@sgi.com> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26cy82c693: add ->set_dma_mode methodBartlomiej Zolnierkiewicz2-57/+22
* Fix SWDMA/MWDMA masks in cy82c693_chipset. * Add IDE_HFLAG_CY82C693 host flag and use it in ide_tune_dma() to check whether the DMA should be enabled even if ide_max_dma_mode() fails. * Convert cy82c693_dma_enable() to become cy82c693_set_dma_mode() and remove no longer needed cy82c693_ide_dma_on(). Then set IDE_HFLAG_CY82C693 instead of IDE_HFLAG_TRUST_BIOS_FOR_DMA in cy82c693_chipset. * Bump driver version. As a result of this patch cy82c693 driver will configure and use DMA on all SWDMA0-2 and MWDMA0-2 capable ATA devices instead of relying on BIOS. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26cy82c693: correct DMA modes clippingBartlomiej Zolnierkiewicz1-6/+6
* Mask device DMA masks by ATA_{S,M}WDMA2 in cy82c693_ide_dma_on(). * Remove clipping of DMA modes by id->tDMA in cy82c693_dma_enable(): - id->tDMA may not be defined on newer devices - id->vendor6/id->tDMA word is in LE endianness (cy82c693 seems to be Alpha specific though) * Bump driver version. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26ide: (hopefully) fix VDMA for CS5520Bartlomiej Zolnierkiewicz3-16/+25
* Set the correct hwif->dma_base for the second channel in ide_get_or_set_dma_base(). * Remove DMA enable code from cs5520_set_pio_mode(), this can be handled by the generic ->dma_host_on method now. * Add VDMA check to ide_config_drive_speed(). * drive->using_dma was never enabled since cs5520 host driver's ->ide_dma_on method overrided the generic ->ide_dma_on (so __ide_dma_on() was never called, drive->using_dma was never set and VDMA was never used since it depends on drive->using_dma). Fix it by using ->dma_host_on method instead of ->ide_dma_on (also add matching ->dma_host_off method). Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26ide-disk: add idedisk_set_doorlock() helperBartlomiej Zolnierkiewicz1-10/+13
There should be no functionality changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26serverworks: cleanup ->set_dma_mode methodBartlomiej Zolnierkiewicz1-19/+6
IDE core guarantees that ->set_dma_mode will be called only for DMA modes set in SWDMA/MWDMA/UDMA masks. There should be no functionality changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26sl82c105: remove no longer needed ->selectproc methodBartlomiej Zolnierkiewicz1-31/+3
* Program register 0x40 in sl82c105_resetproc(). * Remove no longer needed sl82c105_selectproc() and pci_set_drvdata() calls. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26sl82c105: program DMA/PIO timings in ->dma_start/->ide_dma_endBartlomiej Zolnierkiewicz1-40/+15
* Program DMA timings in sl82c105_dma_start() (->dma_start method) before starting DMA transfer. * Add sl82c105_dma_end() (->ide_dma_end method) to switch back to PIO timings when DMA transfer is complete. * In sl82c105_set_pio_mode() program timings regardless of ->using_dma setting and in sl82c105_set_dma_mode() only cache the new timings. * Remove no longer needed sl82c105_{ide_dma_on,off_quietly}(). Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-25ide: remove redundant DMA blacklist check from __ide_dma_on()Bartlomiej Zolnierkiewicz1-4/+0
->ide_dma_on method is called only after successful ide_dma_check() call (ide_dma_check()->ide_tune_dma() checks DMA blacklist) or if drive->using_dma has been previously enabled for a given device (->ide_dma_on is the only place which sets drive->using_dma to '1'). There should be no functionality changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-25ide: cleanup ide_set_dma()Bartlomiej Zolnierkiewicz4-25/+12
* ->dma_off_quietly is always called before ide_set_dma() so the call can be moved inside ide_set_dma(). * ide_dma_check() doesn't touch hardware so ->dma_off_quietly call for 'rc == -1' case is redundant, remove it. * '0' and '-1' are the only values returned by ide_dma_check() so remove dead code for other cases. There should be no functionality changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-25ide: remove redundant ->ide_dma_on call from set_using_dma()Bartlomiej Zolnierkiewicz1-1/+1
ide_set_dma() calls ->ide_dma_on method itself and returns zero only if ->ide_dma_on call succeeded. There should be no functionality changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-25sc1200: move DMA timings to timing tablesBartlomiej Zolnierkiewicz1-45/+17
Based on pata_sc1200.c. There should be no functionality changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-25ide: add IDE_HFLAG_ABUSE_SET_DMA_MODE host flagBartlomiej Zolnierkiewicz29-225/+120
* Add IDE_HFLAG_ABUSE_SET_DMA_MODE host flag and use it to decide what to do with transfer modes < XFER_PIO_0 in ide_set_xfer_rate(). * Set IDE_HFLAG_ABUSE_SET_DMA_MODE in host drivers that need it (aec62xx, amd74xx, cs5520, cs5535, hpt34x, hpt366, pdc202xx_old, serverworks, tc86c001 and via82cxxx) and cleanup ->set_dma_mode methods in host drivers that don't (IDE core code guarantees that ->set_dma_mode will be called only for modes which are present in SWDMA/MWDMA/UDMA masks). While at it: * Add IDE_HFLAGS_HPT34X/HPT3XX/PDC202XX/SVWKS define in hpt34x/hpt366/pdc202xx_old/serverworks host driver. There should be no functionality changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-25sis5513: factor out UDMA programming codeBartlomiej Zolnierkiewicz1-33/+45
* Factor out UDMA programming code from sis_set_dma_mode() to per chipset family helpers: sis_{ata33,ata133}_program_udma_timings(). * Add sis_program_udma_timings() helper. * Remove unneeded casts to 'unsigned long'. * Minor cleanups. There should be no functionality changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-25pdc202xx_new: move PIO programming code to pdcnew_set_pio_mode()Bartlomiej Zolnierkiewicz1-16/+10
* Move PIO programming code from pdcnew_set_mode() to pdcnew_set_pio_mode(). * Rename pdcnew_set_mode() to pdcnew_set_dma_mode(). There should be no functionality changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-25ide: kill duplicate code in ide_dump_{ata,atapi}_status()Bartlomiej Zolnierkiewicz1-68/+37
* Move the common code from ide_dump_{ata,atapi}_status() to ide_dump_status(). * ide_dump_{ata,atapi}_status() -> ide_dump_{ata,atapi}_error(). There should be no functionality changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-25ide-disk: use ide_get_lba_addr()Bartlomiej Zolnierkiewicz2-23/+6
* Export ide_get_lba_addr(). * Convert idedisk_{read_native,set}_max_address() to use ide_get_lba_addr(). * Remove incorrect comment from idedisk_read_native_max_address() (noticed by Sergei). There should be no functionality changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-25ide: printk fixAndrew Morton1-1/+2
power4: drivers/ide/ide-lib.c: In function `ide_dump_sector': drivers/ide/ide-lib.c:516: warning: long long unsigned int format, u64 arg (arg 2) We don't know what type is used to implement u64 hence it must always be cast when printed. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-25ide: add ide_tf_read() helperBartlomiej Zolnierkiewicz3-61/+84
* Factor out code reading taskfile registers from ide_end_drive_cmd() to the new ide_tf_read() helper. * Add IDE_TFLAG_IN_* taskfile flags to indicate the need to load particular IDE taskfile register in ide_tf_read(). * Update ide_end_drive_cmd() to set respective IDE_TFLAG_IN_* taksfile flags. * Add ide_get_lba_addr() for getting LBA sector address from taskfile struct. * Factor out code getting sector address from ide_dump_ata_status() to the new ide_dump_sector() function. * Convert ide_dump_sector() to use ide_tf_read() and ide_get_lba_addr(). * Remove no longer needed ide_read_24(). The only change in functionality caused by this patch is that ide_dump_ata_status() no longer prints "high"/"low" parts of LBA48 sector address (of course LBA48 sector address is still printed). Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-25ide: fix registers loading order in ide_dump_ata_status()Bartlomiej Zolnierkiewicz2-11/+16
Fix registers loading order in ide_dump_ata_status()/ide_read_24(). Load registers in this order: * IDE_SECTOR_REG * IDE_LCYL_REG * IDE_HCYL_REG * IDE_SELECT_REG It shouldn't affect anything (just a usual paranoia to separate changes which change the way in which hardware is accessed from code cleanups). Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-25ide-disk: use do_rw_taskfile() (take 2)Bartlomiej Zolnierkiewicz2-27/+18
* Add IDE_TFLAG_DMA_PIO_FALLBACK taskfile flag to indicate the need to skip loading taskfile registers in do_rw_taskfile(). * Export do_rw_taskfile(). * Convert __ide_do_rw_disk() to use do_rw_taskfile(). * Unexport ide_tf_load(). * Unexport {pre_task_out,task_in}_intr() and make it static. * Remove incorrect comment about do_rw_taskfile() from <linux/ide.h>. There should be no functionality changes caused by this patch. v2: * Add missing blk_fs_request() check to task_dma_ok() (for VDMA). Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-25ide-disk: add ide_tf_set_cmd() helperBartlomiej Zolnierkiewicz1-30/+55
* Add ide_tf_set_cmd() helper for selecting/setting command and data phase (note: DMA data phases are there for completness, they are not required ATM). * Set IDE_TFLAG_WRITE taskfile flag for write requests in __ide_do_rw_disk(). * Convert __ide_do_rw_disk() to use the new ide_tf_set_cmd() helper. There should be no functionality changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-25ide-disk: extend timeout for PIO-in commandsBartlomiej Zolnierkiewicz1-1/+2
s/WAIT_CMD/WAIT_WORSTCASE/ to make the timeout the same as in do_rw_taskfile() Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-25ide: remove 'handler' field from ide_task_t (take 2)Bartlomiej Zolnierkiewicz2-32/+37
* Add IDE_TFLAG_CUSTOM_HANDLER taskfile flag and use it for internal requests which require custom handlers. Check the flag in do_rw_taskfile() and set handler accordingly. * Cleanup ide_init_{specify,restore,setmult}_cmd() and rename it to ide_tf_set_{specify,restore,setmult}_cmd(). * Make {set_geometry,recal,set_multmode}_intr() static. * Remove no longer needed 'handler' field from ide_task_t. v2: * 'handler' in do_rw_taskfile() must be set to NULL initially. There should be no functionality changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-25ide: use ->data_phase to set ->handler in do_rw_taskfile()Bartlomiej Zolnierkiewicz3-9/+10
* Use ->data_phase to set ->handler in do_rw_taskfile() instead of setting ->handler in callers of ide_raw_taskfile()/do_rw_taskfile(). * Unexport task_no_data_intr() and make it static. There should be no functionality changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-25ide: convert do_rw_taskfile() to use ->data_phaseBartlomiej Zolnierkiewicz1-12/+13
* Use task->data_phase in do_rw_taskfile() to decide what to do. * task->prehandler is only used by TASKFILE[_MULTI]_OUT so just use pre_task_out_intr() directly and remove no longer needed 'prehandler' field from ide_task_t. * Remove no longer needed ide_pre_handler_t type. There should be no functionality changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-25ide: merge flagged_taskfile() into do_rw_taskfile()Bartlomiej Zolnierkiewicz2-23/+12
Based on the earlier work by Tejun Heo. task->data_phase == TASKFILE_MULTI_{IN,OUT} vs drive->mult_count == 0 check is needed also for ide_taskfile_ioctl() requests that don't have IDE_TFLAG_FLAGGED taskfile flag set. Cc: Tejun Heo <htejun@gmail.com> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-25ide-disk: guarantee 400ns delay after writing command registerBartlomiej Zolnierkiewicz1-0/+1
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-25ide-disk: fix __ide_do_rw_disk() to use ->OUTBSYNCBartlomiej Zolnierkiewicz1-2/+1
Fix __ide_do_rw_disk() to use ->OUTBSYNC instead of ->OUTB (needed for pmac and scc_pata host drivers). Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-25sc1200: remove pointless hwif lookup loopBartlomiej Zolnierkiewicz1-70/+38
Save PCI regs values for both IDE ports in one buffer, in order to eliminate a needless and ugly loop across all hwifs, searching for our PCI device. Partially based on the previous patch by Jeff Garzik. Cc: Jeff Garzik <jeff@garzik.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-25ide: remove 'tf_in_flags' field from ide_task_tBartlomiej Zolnierkiewicz2-17/+14
* Add IDE_TFLAG_IN_DATA taskfile flag to indicate the need of reading IDE_DATA_REG in ide_end_drive_cmd(). Set the new flag in ide_taskfile_ioctl() if ->in_flags.b.data is set. * Add IDE_TFLAG_FLAGGED_SET_IN_FLAGS taskfile flag to indicate the need of modifying ->in_flags in ide_taskfile_ioctl(). Set the new flag in flagged_taskfile() and move the code modifying ->tf_in_flags to ide_taskfile_ioctl(). While at it remove the bogus comment: ->tf_in_flags (except .b.data) have no effect on selection of registers to read. * Remove no longer needed 'tf_in_flags' field from ide_task_t. As the result we finally have the internals of HDIO_DRIVE_TASKFILE ioctl separated from the core IDE code. There should be no functionality changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-25ide: remove 'command_type' field from ide_task_tBartlomiej Zolnierkiewicz3-57/+55
* Add 'data_buf' and 'nsect' variables in ide_taskfile_ioctl() to cache data buffer pointer and number of sectors to transfer (this allows us to have only one ide_diag_taskfile() call). * Add IDE_TFLAG_WRITE taskfile flag and use it to check whether the REQ_RW request flag should be set. * Move ->command_type handling from ide_diag_taskfile() to ide_taskfile_ioctl() and use ->req_cmd instead of ->command_type. * Add 'nsect' parameter to ide_raw_taskfile(). * Merge ide_diag_taskfile() into ide_raw_taskfile(). * Initialize ->data_phase explicitly in idedisk_prepare_flush(), ide_start_power_step() and ide_disk_special(). * Remove no longer needed 'command_type' field from ide_task_t. * Add #ifndef/#endif __KERNEL__ to <linux/hdreg.h> around no longer used by kernel IDE_DRIVE_TASK_* and TASKFILE_* defines. There should be no functionality changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-25ide: remove hwif->intrprocBartlomiej Zolnierkiewicz4-16/+5
Given that: * hpt366.c::hpt3xx_intrproc() is the only user of hwif->intrproc * hpt366.c::hpt3xx_quirkproc() sets drive->quirk_list to 1 for quirky drives which is a value unique to hpt366 host driver we can remove hwif->intproc and just check for drive->quirk_list == 1 in ide_do_request(). Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-25ide: remove SELECT_INTERRUPT()Bartlomiej Zolnierkiewicz2-9/+4
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-25ide: remove QUIRK_LIST()Bartlomiej Zolnierkiewicz2-7/+4
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-25ide: add ide_pktcmd_tf_load() helperBartlomiej Zolnierkiewicz4-21/+23
Add ide_pktcmd_tf_load() helper and convert ATAPI device drivers to use it. There should be no functionality changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-25ide-{floppy,tape,scsi}: fix register loading order when issuing packet commandBartlomiej Zolnierkiewicz2-2/+2
Load IDE_BCOUNTL_REG before IDE_BCOUNTH_REG when issuing packet command. It shouldn't affect anything (just a usual paranoia to separate changes which change the way in which hardware is accessed from code cleanups). Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-25ide-cd: fix register loading order in cdrom_start_packet_command()Bartlomiej Zolnierkiewicz1-3/+3
Load IDE_CONTROL_REG before other registers in cdrom_start_packet_command(). It shouldn't affect anything (just a usual paranoia to separate changes which change the way in which hardware is accessed from code cleanups). While at it move misplaced FIXME comment in the right place. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-25ide: remove atapi_ireason_t (take 3)Bartlomiej Zolnierkiewicz2-27/+25
Remove atapi_ireason_t. While at it: * replace 'HWIF(drive)' by 'drive->hwif' (or just 'hwif' where possible) v2: * v1 had CD and IO bits reversed in many places. * Use CD and IO defines from <linux/hdreg.h>. v3: * Fix incorrect "(ireason & IO) == test_bit()". (Noticed by Sergei) Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-25ide: remove ata_nsector_t, ata_data_t and atapi_bcount_tBartlomiej Zolnierkiewicz3-42/+42
Remove ata_nsector_t, ata_data_t (unused) and atapi_bcount_t. While at it: * replace 'HWIF(drive)' by 'hwif' Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-25ide: remove atapi_feature_tBartlomiej Zolnierkiewicz1-5/+5
Remove atapi_feature_t. While at it: * replace 'HWIF(drive)' by 'hwif' Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-25ide: remove atapi_error_t (take 2)Bartlomiej Zolnierkiewicz3-15/+12
Remove atapi_error_t. While at it: * replace 'HWIF(drive)' by 'drive->hwif' v2: * Add {ILI,EOM,LFS}_ERR defines to <linux/hdreg.h>. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-25ide: remove ata_status_t and atapi_status_tBartlomiej Zolnierkiewicz3-36/+33
Remove ata_status_t (unused) and atapi_status_t. While at it: * replace 'HWIF(drive)' by 'drive->hwif' (or just 'hwif' where possible) Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.