aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/iio/accel/kxsd9.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-04-04iio: Allow to read mount matrix from ACPIAndy Shevchenko1-3/+1
Currently mount matrix is allowed in Device Tree, though there is no technical issue to extend it to support ACPI. Convert the function to use device_property_read_string_array() and thus allow to read mount matrix from ACPI if available. Example of use in _DSD method: Name (_DSD, Package () { ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), Package () { Package () { "mount-matrix", Package() { "1", "0", "0", "0", "0.866", "0.5", "0", "-0.5", "0.866", } }, } }) At the same time drop the "of" prefix from its name and convert current users. No functional change intended. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-08-22iio:accel: drop assign iio_info.driver_module and iio_trigger_ops.ownerJonathan Cameron1-1/+0
The equivalent of both of these are now done via macro magic when the relevant register calls are made. The actual structure elements will shortly go away. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
2016-09-18iio: accel: kxsd9: Support reading a mounting matrixLinus Walleij1-0/+24
This adds support for the mounting matrix to the KXSD9 driver. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-09-18iio: accel: kxsd9: Deploy system and runtime PMLinus Walleij1-2/+90
This deploys runtime and system PM in the KXSD9 driver: - Use the force_runtime_suspend/resume callbacks as system PM operations. - Add buffer prepare/unprepare callbacks to grab the runtime PM while we're using buffered reads and put get/put_autosuspend in these. - Insert get/put_autosuspend calls anywhere the IO is used from the raw read/write callbacks. - Move the fullscale setting to be cached in the state container so we can restore it properly when coming back from system/runtime suspend. - Set the autosuspend delay to two orders of magnitude that of the sensor start-up time (20ms) so we will autosuspend after 2s. - Register the callbacks in both the SPI and I2C subdrivers. Tested with the I2C KXSD9 on the Qualcomm APQ8060 Dragonboard. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-09-18iio: accel: kxsd9: Replace "parent" with "dev"Linus Walleij1-10/+10
What is passed to the .probe() and .remove() functions is technically the parent of the created IIO device but it becomes a big confusion for the head to have it named like this since it is usually clear from context the "dev" refers to the physical device, and when next adding PM callbacks a clean "struct device *dev" pointer is passed to these and that makes it even more confused. Rename "parent" to "dev" like in most other drivers. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-09-18iio: accel: kxsd9: Fetch and handle regulatorsLinus Walleij1-3/+85
This adds supply regulator handling for the VDD and IOVDD inputs on the KXSD9 component, makes sure to bring the regulators online during probe and disable them on remove or the errorpath. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-09-18iio: accel: kxsd9: Deploy proper register bit definesLinus Walleij1-9/+27
There are some hardcoded register values etc in the code, define proper bitfield definitions, and use them when getting and setting the scale. Optimize a read/modify/write to use regmap_update_bits() at the same time. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-09-18iio: accel: kxsd9: Add triggered buffer handlingLinus Walleij1-6/+76
As is custom with all modern sensors, add a clever burst mode that will just stream out values from the sensor and provide it to userspace to do the proper offsetting and scaling. This is the result when tested with an HRTimer trigger: $ generic_buffer -a -c 10 -n kxsd9 -t foo /sys/bus/iio/devices/iio:device1 foo 0.371318 0.718680 9.869872 1795.000000 97545896129 -0.586922 0.179670 9.378775 2398.000000 97555864721 -0.299450 0.179670 10.348992 2672.000000 97565874055 0.371318 0.335384 11.103606 2816.000000 97575883240 0.179670 0.574944 10.540640 2847.000000 97585862351 0.335384 0.754614 9.953718 2840.000000 97595872425 0.179670 0.754614 10.732288 2879.000000 97605882351 0.000000 0.754614 10.348992 2872.000000 97615891832 -0.730658 0.574944 9.570422 2831.000000 97625871536 0.000000 1.137910 10.732288 2872.000000 97635881610 Columns shown are x, y, z acceleration, so a positive acceleration of ~9.81 (shaky due to bad calibration) along the z axis. The fourth column is the AUX IN which is floating on this system, it seems to float up to the 2.85V VDD voltage. To be able to cleanup the triggered buffer, we need to add .remove() callbacks to the I2C and SPI subdrivers and call back into an exported .remove() callback in the core. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-09-18iio: accel: kxsd9: Fix up offset and scalingLinus Walleij1-17/+18
This fixes several errors in the offset and scaling of the raw values from the KXSD9 sensor: - The code did not convert the big endian value from the sensor into the endianness of the host CPU. Fix this with be16_to_cpu() on the raw obtained value. - The code did not regard the fact that only the upper 12 bits of the accelerometer values are valid. Shift these down four bits to yield the real raw value. - Further the sensor provides 2048 at zero g. This means that an offset of 2048 must be subtracted from the raw value before scaling. This was not taken into account by the driver, yielding a weird value. Fix this by providing this offset in sysfs. To house the scaling code better, the value reading code was factored into the raw reading function. This proper scaling and offseting is necessary to get proper values out of triggered buffer by offsetting, shifting and scaling them. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-09-18iio: accel: kxsd9: Drop the buffer lockLinus Walleij1-14/+4
The RX/TX buffers are gone so drop the lock (it should have been in the transport struct anyway). Tested-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-09-18iio: accel: kxsd9: Convert to use regmap for transportLinus Walleij1-16/+24
This converts the KXSD9 driver to drop the custom transport mechanism and just use regmap like everything else. Tested-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-09-18iio: accel: kxsd9: Do away with the write2 helperLinus Walleij1-2/+2
This is just a masquerading register write function, so use the register write function instead. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-09-18iio: accel: kxsd9: Split out SPI transportLinus Walleij1-126/+21
This moves the KXSD9 SPI transport out to its own file and Kconfig entry, so that we will be able to add another transport method. We export the common probe and add a local header file for the functionality shared between the main driver and the transport driver. We make the SPI transport the default for the driver if SPI is available and the KXSD9 driver was selected, so the oldconfig upgrade path will be clear. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-09-18iio: accel: kxsd9: split out a common remove() functionLinus Walleij1-10/+14
This makes it possible to later split the transport mechanism using a generic probe() and a generic remove(). Use dev_set_drvdata() and dev_get_drvdata() as a paired accessor to operate on the abstract struct device * regardless of the transport mechanism in use. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-09-18iio: accel: kxsd9: Split out transport mechanismLinus Walleij1-52/+123
Split off a transport mechanism struct that will deal with the SPI traffic in preparation for adding I2C support. Tested-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-09-03iio: accel: kxsd9: Fix scaling bugLinus Walleij1-0/+1
All the scaling of the KXSD9 involves multiplication with a fraction number < 1. However the scaling value returned from IIO_INFO_SCALE was unpredictable as only the micros of the value was assigned, and not the integer part, resulting in scaling like this: $cat in_accel_scale -1057462640.011978 Fix this by assigning zero to the integer part. Cc: stable@vger.kernel.org Tested-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-08-21iio: accel: kxsd9: Fix raw read returnLinus Walleij1-0/+1
Any readings from the raw interface of the KXSD9 driver will return an empty string, because it does not return IIO_VAL_INT but rather some random value from the accelerometer to the caller. Cc: stable@vger.kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-06-26iio: accel: kxsd9: fix the usage of spi_w8r8()Linus Walleij1-2/+2
These two spi_w8r8() calls return a value with is used by the code following the error check. The dubious use was caused by a cleanup patch. Fixes: d34dbee8ac8e ("staging:iio:accel:kxsd9 cleanup and conversion to iio_chan_spec.") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-10-28spi: Drop owner assignment from spi_driversAndrew F. Davis1-1/+0
An spi_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Andrew F. Davis <afd@ti.com> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2013-11-17iio:accel:kxsd9 fix missing mutex unlockFrank Zago1-3/+4
This will leave a lock held after reading from the device, preventing any further reads. Signed-off-by: Frank Zago <frank@zago.net> Cc: stable@vger.kernel.org Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-10-24iio: accel: kxsd9: Remove redundant variableSachin Kamat1-6/+1
Return directly thereby eliminating an intermediate variable. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-08-03iio: accel: kxsd9: Use devm_iio_device_allocSachin Kamat1-12/+5
Using devm_iio_device_alloc makes code simpler. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-03-17iio:accel:kxsd9 move to info_mask_(shared_by_type/separate)Jonathan Cameron1-3/+3
The original info_mask is going away in favour of the broken out versions. Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-02-09iio: Use spi_sync_transfer()Lars-Peter Clausen1-5/+1
Use the new spi_sync_transfer() helper function instead of open-coding it. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-01-26iio:accel:kxsd9 move out of stagingJonathan Cameron1-0/+291
This is a very simple driver giving basic access to this part over an spi bus. Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.