aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/iio/light (follow)
AgeCommit message (Collapse)AuthorFilesLines
2017-08-20Merge tag 'iio-for-4.14b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-nextGreg Kroah-Hartman2-2/+2
Jonathan writes: Second set of IIO new device support, features and cleanup for the 4.14 cycle. New device support: * ak8974 - support the AMI306. * st_magnetometer - add support for the LIS2MDL with bindings. * rockchip-saradc - add binding for rv1108 SoC (no driver change). * srf08 - add srf02 (i2c only) and srf10 support. * stm32-timer - support for the STM32H7 to existing driver. Features: * tools - move over to the tools buildsystem rather than hand rolling. - add an install section to the build. * ak8974 - use serial number to add device randomness. - add AMI306 calibration data output. * ccs811 - triggered buffer support. * srf08 - add a device tree table as the old style i2c probing is going away, - add triggered buffer support * st32-adc - add optional st,min-sample-time-nsecs binding to allow control of sampling against analog circuitry. * stm32-timer - add output compare triggers. * ti-ads1015 - add threshold event support. * ti-ads7950 - Allow use on ACPI platforms including providing a default reference voltage as there is no way to obtain this on ACPI currently. Cleanup and fixes: * ad7606 - fix an error return code in probe. * ads1015 - fix incorrect data rate setting update when capture in progress, - fix wrong scale information for the ADS1115, - make conversions work when CONFIG_PM is not set, - make sure we don't get a stale result after a runtime resume by ensuring we wait long enough, - avoid returning a false error form the buffer setup callbacks, - add enough wait time to get the correct conversion, - remove an unnecessary config register update, - add a helper to set conversion mode reducing repeated boilerplate, - use devm_iio_triggered_buffer_setup to simplify error and remove paths, - use iio_device_claim_direct_mode instead of opencoding the same. * ak8974 - mark the INT_CLEAR register as precious to prevent debugfs access. * apds9300 - constify the i2c_device_id. * at91-sama5 adc - add missing Kconfig dependency. * bma180 accel - constify the i2c_device_id. * rockchip_saradc - explicitly request exclusive reset control as part of the reset rework on going throughout the kernel. * st_accel - fix drdy configuration for a load of accelerometers that only have the int1 line. Fix is unimportant as presumably no deviec tree actually used the non existent hardware line. * st_pressure - fix drdy configuration for LPS22HB and LPS25H by dropping int2 support as they don't have this. Fix is unimportant as presumably no device tree actually used the non existent hardware line. * stm32-dac - explicitly request exclusive reset control (part of reset being reworked). * tsl2583 - constify the i2c_device_id. * xadc - coding style fixes.
2017-08-20iio: light: tsl2583: constify i2c_device_idArvind Yadav1-1/+1
i2c_device_id are not supposed to change at runtime. All functions working with i2c_device_id provided by <linux/i2c.h> work with const i2c_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-08-20iio: light: apds9300: constify i2c_device_idArvind Yadav1-1/+1
i2c_device_id are not supposed to change at runtime. All functions working with i2c_device_id provided by <linux/i2c.h> work with const i2c_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-08-14Merge 4.13-rc5 into staging-nextGreg Kroah-Hartman1-1/+1
We need it here for iio fixes. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-23Merge tag 'iio-fixes-for-4.13a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linusGreg Kroah-Hartman1-1/+1
Jonathan writes: First set of IIO fixes for the 4.13 cycle. * ad2s1210 - Fix negative angular velocity reads (identified by a gcc 7 warning) * aspeed-adc - Wait for initialization sequence to finish before enabling channels. Without it no channels work. * axp288 - Revert a patch that dropped some bogus register mods. No one is entirely sure why but it breaks charging on some devices. - Fix GPADC pin read returning 0. Turns out a small sleep is needed. * bmc150 - Make sure device is restored to normal state after suspend / resume cycle. Otherwise, simple sysfs reads are broken. * tsl2563 - fix wrong event code. * st-accel - add spi 3-wire support. Needed to fix the lsm303agr accelerometer which only had 3 wires in all cases. Side effect is to enable optional 3-wire support for other devices. * st-pressure - disable multiread by default for LPS22HB (only effects SPI) * sun4i-gpadc-iio - fix unbalanced irq enable / disable * vf610 - Fix VALT slection for REFSEL bits - ensures we are using the right reference pins.
2017-07-04iio: light: rpr0521 triggered bufferMikko Koivunen1-7/+329
Set up and use triggered buffer if there is irq defined for device in device tree. Trigger producer triggers from rpr0521 drdy interrupt line. Trigger consumer reads rpr0521 data to scan buffer. Depends on previous commits of _scale and _offset. Signed-off-by: Mikko Koivunen <mikko.koivunen@fi.rohmeurope.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-07-01iio: light: tcs3472: add link to datasheetAkinobu Mita1-0/+2
Add a link to the TCS3472 datasheet in the AMS's website. Cc: Peter Meerwald <pmeerw@pmeerw.net> Cc: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-07-01iio: light: tcs3472: fix ATIME register writeAkinobu Mita1-1/+1
The integration time is controlled by the ATIME register only. However, this register is written by i2c_smbus_write_word_data() in write_raw(). We actually don't need to write a subsequent register. So just use i2c_smbus_write_byte_data() instead. Cc: Peter Meerwald <pmeerw@pmeerw.net> Cc: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Acked-by: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-06-24iio: light: tsl2563: use correct event codeAkinobu Mita1-1/+1
The TSL2563 driver provides three iio channels, two of which are raw ADC channels (channel 0 and channel 1) in the device and the remaining one is calculated by the two. The ADC channel 0 only supports programmable interrupt with threshold settings and this driver supports the event but the generated event code does not contain the corresponding iio channel type. This is going to change userspace ABI. Hopefully fixing this to be what it should always have been won't break any userspace code. Cc: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-06-12Merge 4.12-rc5 into staging-nextGreg Kroah-Hartman1-2/+2
We want the IIO fixes and other staging driver fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-21iio: light: rpr0521 channel numbers reorderedMikko Koivunen1-20/+20
Move proximity channel from last to first in structs to avoid confusion later with buffered triggers. Proximity data output is first in rpr0521 register map. Signed-off-by: Mikko Koivunen <mikko.koivunen@fi.rohmeurope.com> Acked-by: Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-05-21iio: light: rpr0521 proximity offset read/writeMikko Koivunen1-0/+52
Add sysfs read/write proximity offset feature. Offset is read/write from sensor registers. Values are proximity raw 10-bit values. After applying offset value, output values will be (measured_raw - offset_value). Output values are unsigned so offset value doesn't make output negative. Signed-off-by: Mikko Koivunen <mikko.koivunen@fi.rohmeurope.com> Acked-by: Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-05-21iio: light: rpr0521 sample_frequency read/writeMikko Koivunen1-0/+117
Add sysfs read/write sample frequency. Signed-off-by: Mikko Koivunen <mikko.koivunen@fi.rohmeurope.com> Acked-by: Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-05-21iio: light: rpr0521 whitespace fixesMikko Koivunen1-0/+3
Just whitespace change, no functional changes. Signed-off-by: Mikko Koivunen <mikko.koivunen@fi.rohmeurope.com> Acked-by: Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-05-21iio: light: rpr0521 magic number to sizeof() on value readMikko Koivunen1-1/+1
Changed magic number to sizeof() on value read. Signed-off-by: Mikko Koivunen <mikko.koivunen@fi.rohmeurope.com> Acked-by: Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-05-21iio: light: rpr0521 on-off sequence change for CONFIG_PMMikko Koivunen1-24/+46
Refactor _set_power_state(), _resume() and _suspend(). Enable measurement only when needed, not in _init(). System can suspend during measurement and measurement is continued on resume. Pm turns off measurement when both ps and als measurements are disabled for 2 seconds. During off-time the power save is 20-500mA, typically 180mA. Signed-off-by: Mikko Koivunen <mikko.koivunen@fi.rohmeurope.com> Acked-by: Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-05-21iio: light: rpr0521 poweroff for probe failsMikko Koivunen1-2/+15
Set sensor measurement off after probe fail in pm_runtime_set_active() or iio_device_register(). Without this change sensor measurement stays on even though probe fails on these calls. This is maybe rare case, but causes constant power drain without any benefits when it happens. Power drain is 20-500uA, typically 180uA. Signed-off-by: Mikko Koivunen <mikko.koivunen@fi.rohmeurope.com> Acked-by: Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-05-21iio: light: rpr0521 disable sensor -bugfixMikko Koivunen1-2/+8
Sensor was marked enabled on each call even if the call was for disabling sensor. Signed-off-by: Mikko Koivunen <mikko.koivunen@fi.rohmeurope.com> Acked-by: Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-05-21iio: light: ltr501 Fix interchanged als/ps register fieldFranziska Naepelt1-2/+2
The register mapping for the IIO driver for the Liteon Light and Proximity sensor LTR501 interrupt mode is interchanged (ALS/PS). There is a register called INTERRUPT register (address 0x8F) Bit 0 represents PS measurement trigger. Bit 1 represents ALS measurement trigger. This two bit fields are interchanged within the driver. see datasheet page 24: http://optoelectronics.liteon.com/upload/download/DS86-2012-0006/S_110_LTR-501ALS-01_PrelimDS_ver1%5B1%5D.pdf Signed-off-by: Franziska Naepelt <franziska.naepelt@idt.com> Fixes: 7ac702b3144b6 ("iio: ltr501: Add interrupt support") Acked-by: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-05-20iio: light: isl29018: Only declare ACPI table when ACPI is enabledMatthias Kaehlcke1-0/+2
This fixes the following warning when building with clang: drivers/iio/light/isl29018.c:808:36: error: variable 'isl29018_acpi_match' is not needed and will not be emitted [-Werror,-Wunneeded-internal-declaration] Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Guenter Roeck <groeck@chromium.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-05-16iio: tsl2583: add runtime power management supportBrian Masney1-30/+76
This patch adds runtime power management support to the tsl2583 driver. The device is powered off after two seconds of inactivity. Verified that the driver still functions correctly using a TSL2581 hooked up to a Raspberry Pi 2. Signed-off-by: Brian Masney <masneyb@onstation.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-04-30iio: isl29028: add isl29030 supportSebastian Reichel1-0/+6
isl29030 is basically the same chip. The only difference is the chip's first pin. For isl29028 its named ADDR0 and can be used to change the chip's i2c address. For isl29030 on the other hand that pin is named Ials and is an analog current output proportional to ALS/IR. This change is irrelevant for the Linux driver. This has been tested on Motorola Droid 4. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-04-26staging: iio: isl29028: move out of stagingBrian Masney3-0/+734
Move ISL29028 ALS / Proximity Sensor out of staging and into mainline. Signed-off-by: Brian Masney <masneyb@onstation.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-04-14iio: light: apds9960: add system-wide suspendMatt Ranostay1-0/+2
APDS9960 can safely force runtime suspend if the system wants to enter system-wide suspend Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-04-02iio: light: lm3533-als: constify attribute_group structuressimran singhal1-2/+2
Check for attribute_group structures that are only stored in the event_attrs filed of iio_info structure. As the event_attrs field of iio_info structures is constant, so these attribute_group structures can also be declared constant. Done using coccinelle: @r1 disable optional_qualifier @ identifier i; position p; @@ static struct attribute_group i@p = {...}; @ok1@ identifier r1.i; position p; struct iio_info x; @@ x.event_attrs=&i@p; @bad@ position p!={r1.p,ok1.p}; identifier r1.i; @@ i@p @depends on !bad disable optional_qualifier@ identifier r1.i; @@ static +const struct attribute_group i={...}; @depends on !bad disable optional_qualifier@ identifier r1.i; @@ +const struct attribute_group i; As the attrs field of iio_info structures is also constant, so these attribute_group structures can also be declared constant. Done manually. File size before: text data bss dec hex filename 5798 2376 0 8174 1fee drivers/iio/light/lm3533-als.o File size after: text data bss dec hex filename 5926 2248 0 8174 1fee drivers/iio/light/lm3533-als.o Signed-off-by: simran singhal <singhalsimran0@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-04-01iio: light: apds9960: constify attribute_group structuressimran singhal1-1/+1
Check for attribute_group structures that are only stored in the attrs filed of iio_info structure. As the attrs field of iio_info structures is constant, so these attribute_group structures can also be declared constant. Done using coccinelle: @r1 disable optional_qualifier @ identifier i; position p; @@ static struct attribute_group i@p = {...}; @ok1@ identifier r1.i; position p; struct iio_info x; @@ x.attrs=&i@p; @bad@ position p!={r1.p,ok1.p}; identifier r1.i; @@ i@p @depends on !bad disable optional_qualifier@ identifier r1.i; @@ static +const struct attribute_group i={...}; @depends on !bad disable optional_qualifier@ identifier r1.i; @@ +const struct attribute_group i; File size before: text data bss dec hex filename 8503 488 0 8991 231f drivers/iio/light/apds9960.o File size after: text data bss dec hex filename 8567 424 0 8991 231f drivers/iio/light/apds9960.o Signed-off-by: simran singhal <singhalsimran0@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-04-01iio: light: bh1750: constify attribute_group structuressimran singhal1-1/+1
Check for attribute_group structures that are only stored in the attrs filed of iio_info structure. As the attrs field of iio_info structures is constant, so these attribute_group structures can also be declared constant. Done using coccinelle: @r1 disable optional_qualifier @ identifier i; position p; @@ static struct attribute_group i@p = {...}; @ok1@ identifier r1.i; position p; struct iio_info x; @@ x.attrs=&i@p; @bad@ position p!={r1.p,ok1.p}; identifier r1.i; @@ i@p @depends on !bad disable optional_qualifier@ identifier r1.i; @@ static +const struct attribute_group i={...}; @depends on !bad disable optional_qualifier@ identifier r1.i; @@ +const struct attribute_group i; File size before: text data bss dec hex filename 2276 352 0 2628 a44 drivers/iio/light/bh1750.o File size after: text data bss dec hex filename 2340 320 0 2660 a64 drivers/iio/light/bh1750.o Signed-off-by: simran singhal <singhalsimran0@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-03-25iio:light: Add support for STMicro VL6180 sensorManivannan Sadhasivam3-0/+554
This patch adds support for STMicro VL6180 - ALS, range and proximity sensor. Sensor is capable of measuring the light intensity as well as object distance using TOF (Time of Flight) technology. Signed-off-by: Manivannan Sadhasivam <manivannanece23@gmail.com> Signed-off-by: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-03-19iio: light: apds9960: Add OF device ID tableJavier Martinez Canillas1-0/+7
The driver doesn't have a struct of_device_id table but supported devices are registered via Device Trees. This is working on the assumption that a I2C device registered via OF will always match a legacy I2C device ID and that the MODALIAS reported will always be of the form i2c:<device>. But this could change in the future so the correct approach is to have an OF device ID table if the devices are registered via OF. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-03-19iio: light: tsl2563: Add OF device ID tableJavier Martinez Canillas1-0/+10
The driver doesn't have a struct of_device_id table but supported devices are registered via Device Trees. This is working on the assumption that a I2C device registered via OF will always match a legacy I2C device ID and that the MODALIAS reported will always be of the form i2c:<device>. But this could change in the future so the correct approach is to have an OF device ID table if the devices are registered via OF. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-03-19iio: light: us5182d: Add OF device ID tableJavier Martinez Canillas1-0/+7
The driver doesn't have a struct of_device_id table but supported devices are registered via Device Trees. This is working on the assumption that a I2C device registered via OF will always match a legacy I2C device ID and that the MODALIAS reported will always be of the form i2c:<device>. But this could change in the future so the correct approach is to have an OF device ID table if the devices are registered via OF. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-02-25hid: hid-sensor-prox: Add more data field for hysteresis parsingSong Hongyan1-0/+7
Add HID_USAGE_SENSOR_HUMAN_PRESENCE support for Human Presence sensitivity parsing, in case some implementation uses it as sensitivity modifier. Signed-off-by: Song Hongyan <hongyan.song@intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-02-04iio: cros_ec_light_prox: add ChromeOS EC Light and Proximity SensorsGwendal Grignou3-0/+300
Handle Light and Proximity sensors presented by the ChromeOS EC Sensor hub. Creates an IIO device for each functions. Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Signed-off-by: Guenter Roeck <groeck@chromium.org> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-01-23Merge tag 'iio-for-4.11b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into work-nextGreg Kroah-Hartman2-2/+3
Jonathan writes: Second round of IIO new device support, cleanups and features for the 4.11 cycle New device support: * lsm6dsx imu - new driver and bindings. * max11100 adc - new driver and bindings. * tlc4541 - new driver * tmp007 thermopile - new driver. Core * in kernel interfaces - pass through raw values if no scaling provided and a processed value is requested. * trigger - close a race condition in acquiring trigger reference. - constify device_type structures. - rework the viio_trigger_alloc function to be much neater and easier to read. - free trigger resources correctly on some error paths. Avoids putting a module we don't have. Documentation * ABI - specify a unit for proximity measurements. Cleanups and features * ads1015 - constify iio_info structure. * ads7950 cleanups following merge in previous pull - Add device tree bindings - Drop the ti prefix from the module name in common with other drivers. - Change regulator name to vref to match datasheet and other drivers. * ak8974 - remove a redundant zero timeout check. * bmi160 - use variable names for sizeof instead of types. * cm3605 - mark PM functions as __maybe_unused to avoid a build warning. * isl29028 (on it's way towards moving out of staging). - alignment fixes and newline improvements. - combine proxim_get and read_proxim for simpler code. - drop unused ISL29028_DEV_ATTR macro - move some error logging into functions to cut out repitition. - make error messages more consistent. - tidy up some brackets. - drop the enable flag that nothing uses. - only set proximity rate and ALS scale when relevant channel type is enabled. - runtime pm support. * lsm6dsx - fix wrong values for gyro sensitivitiy. * mag3110 - claim direct mode during sysfs reads to avoid a race condition. * max1363 - export OF device table IDs as module aliases. * max30100 - use msleep for long uncritical delays. * mcp4531 - export OF device table as module aliases. * ms5611 - claim direct mode during sysfs reads to avoid a race condition. * opt3001 - export OF device table as module aliases. * sx9500 - claim direct mode during oversampling changes to avoid a race condition.
2017-01-22iio: light: opt3001: Export OF device ID table as module aliasesJavier Martinez Canillas1-0/+1
The I2C core always reports a MODALIAS of the form i2c:<foo> even if the device was registered via OF, this means that exporting the OF device ID table device aliases in the module is not needed. But in order to change how the core reports modaliases to user-space, it's better to export it. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-01-21iio: light: cm3605: mark PM functions as __maybe_unusedArnd Bergmann1-2/+2
When CONFIG_PM_SLEEP is disabled, we get a harmless warning drivers/iio/light/cm3605.c:292:12: error: 'cm3605_pm_resume' defined but not used [-Werror=unused-function] drivers/iio/light/cm3605.c:281:12: error: 'cm3605_pm_suspend' defined but not used [-Werror=unused-function] Marking the functions as possibly unused avoids the warning without needing to add an #ifdef. Fixes: 8afa505c1230 ("iio: light: add driver for Capella CM3605") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-01-19Merge tag 'iio-for-4.11a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-nextGreg Kroah-Hartman5-4/+363
Jonathan writes: First round of new device support, features and cleanups for IIO in the 4.11 cycle. It's shaping to be another fairly busy cycle. Lots more on the way! New device support * ads7950 - new driver supporting ads7950, ads7951, ads7952, ads7953, ads7954, ads7955, ads7956, ads7957, ads7958, ads7959, ads7960, and ads7961 ADCs. * cm3605 - New driver for this light sensor and proximity sensor which is an analog part with some additional digital controls. * hx711 - New driver. Core new stuff * Gravity sensor type. This is a processed datastream in which the device will try to work out which way is down. * Split the buffer.h file into two parts. One provides the interface to 'use' a buffer, the second provides the internals of the buffer functionality as needed by implementations of buffers. - Move documentation inline so as to allow use of private: tag when generating documentation. - Add some utility functions for the few things that are directly done with the buffers. - Stop exporting functions that no-one uses outside of the core code. - Push docs down by the code in the c file where they should have always been. - Fix typo in kernel-doc for buffer. - push down some includes that were previously happening implicitly. - stop enabling the timestamp of the dummy device. Features and cleanups * ad5592r - ACPI support * ad5593r -ACPI support. * ad5933 - Fix a false comment about size of a particular register. * ad7150 - replace S_IRUGO | S_IWUSR with 0644. I'm not that keen on these patches in general, but as it was nicely presented I took this one anyway. As a general rule will only take these as part of a larger driver cleanup. - don't eat an error but rather reutnr it in the write_event_config callback. * ad7606 - replace non standard range attibute with _scale * ade7753 - use usleep_range for short sleeps * ade7754 - use usleep_range for short sleeps * ade7758 - use usleep_range for short sleeps * ade7759 - use usleep_range for short sleeps * ade7854 - use usleep_range for short sleeps * adis16201 - fix description * adis16203 - fix description - fix copyright year * adis16209 - fix description * adt7316 - Add braces to arms of if else statement (for consistency) - Alignment fixes. * axp288 - Fix up an issue with accidental overwrites of data. * bmi160 - add deivce tables for i2c and spi to support correctly identifying the full dt name (including manufacturer). - device tree binding. * bmp280 - use usleep_range for short sleeps. * cm3232 - return error from cm3232_reg_init rather than eating it if the last write fails. * dummy driver - remove a semicolor found at end of a function defintition. * exynos-adc - use usleep_range for short sleeps. * hid-sensor (accel) - Add timestamp support. The hardware can provide timestamps so lets support them. If not fall back to timestamps estimated in kernel. * hid-sensor (light) - Add a duplicate ID for the light channels so as to keep existing interface whilst also using the more standard IIO interface. * hts221 - acpi probing * imx25-gcq - Add a macro call to allow this driver to be automatically loaded. * isl29028 - reorganise code to avoid deep nesting of if statements. - move chip test and default regs into a function suitable or sharing with power management code. - tidy up some code alignment. * lidar-lite-v3 - introduce compatible strings that make it clear Garmin have consideral friends. * mma8452 - avoid returning signed value when unsigned is appropriate * spmi-vadc - Update function for generic voltage conversion to take into account that different channels on this device should be handled differently. - Rework code to allow per channel voltage scaling and support the standard options for this hardware. - Fixup three minor issues with the above patches for this part. These all effect test builds rather than the native builds for the part, but good to clean them up anyway. * st_sensors - support device matching from the ACPI DST tables. - acpi based probing for accelerometers - acpi based probing for pressure sensors - Allow pressure sensors to read negative values. - Export sampling frequency for lps25h and lps331ap. - Add support for the old DT bindings from the period when these deivces were often supported through windows. Docs fixup: * typo in sysfs-bus-iio
2016-12-30iio: max44000: correct value in illuminance_integration_time_availableAkinobu Mita1-1/+1
According to the datasheet, the shortest available integration time for ALS ADC conversion is 1.5625ms but illuminance_integration_time_available sysfs file shows wrong value. Cc: Crestez Dan Leonard <leonard.crestez@intel.com> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Hartmut Knaack <knaack.h@gmx.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Fixes: d5d8f49b6 ("max44000: Expose ambient sensor scaling") Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-12-30iio: light: add driver for Capella CM3605Linus Walleij3-0/+341
This adds a driver for the Capella Microsystems CM3605 Ambient Light Sensor and proximity sensor. This is a pretty simple entirely analog device that is interfaced with the target system using the POUT (proximity out) and AOUT (ambient light out) signals. The POUT signal is a simple high/low signal that indicates whether an object is in proximity, most typically used to detect a face in front of a mobile device. The signal requires that an infrared LED is mounted next to the device, making IR light reflect off the object in proximity and triggering the POUT signal. We grab a GPIO pin to handle the POUT signal as an interrupt line and register this as an event channel for the sensor. Since the proximity sensor requires an IR LED, we add a LED trigger named "cm3605" so that the infrared LED can just associate with this trigger to be sure it is always on when the proximity sensor needs it. The AOUT is an analog voltage between 0 and 1550 mV that indicate the LUX value in the ambient light: this is orthogonal to the proximity sensor functionality. Since this analog voltage needs to be converted into a digital value, the driver grabs an IIO channel named "aout" associated with the device. This patch created a combined ALS and proximity sensor driver. The former supports raw reads of the LUX value and the latter will generate proximity events. To integrate this properly with Linux we also add a supply regulator for the VDD pin (driving both functions) and add device tree bindings to define the RSET resistor that in turn configures the luminosity range of the ALS sensor. Since the sensor needs to be on more or less constantly, we restrict the power management to system suspend/resume: we disable the IR LED and disable the regulator for VDD on suspend and take them back up on resume. Tests: cd /sys/bus/iio/devices/iio:device1 cat in_illuminance_raw 304 (hold hand over sensor) cat in_illuminance_raw 17 iio_event_monitor cm3605 Found IIO device with name cm3605 with device number 1 (hold hand over sensor) Event: time: 2444842301447, type: proximity, channel: 0, evtype: thresh, direction: falling (remove hand over sensor) Event: time: 2445583440706, type: proximity, channel: 0, evtype: thresh, direction: rising Cc: Capella Microsystems <capellamicro@gmail.com> Cc: Kevin Tsai <ktsai@capellamicro.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-12-30iio: light: hid-sensor-als: Add duplicate IIO_LIGHT channelKweh, Hock Leong1-3/+21
There is one light sensor type defined in the sensor hub specification, which has one Illuminance field. It doesn't distinguish between ambient light sensor or color sensor. Currently it is presented as IIO_INTENSITY channel. There are some user spaces specifically looking for IIO_LIGHT channel. To satisfy such user spaces this change also add a duplicate IIO_LIGHT channel. The units of measurement of Illuminance field is Lux, so it is still compatible to IIO ABI. Signed-off-by: Kweh, Hock Leong <hock.leong.kweh@intel.com> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-12-04iio: light: fix improper return valuePan Bian1-1/+1
In function cm3232_reg_init(), it returns 0 even if the last call to i2c_smbus_write_byte_data() returns a negative value (indicates error). As a result, the return value may be inconsistent with the execution status, and the caller of cm3232_reg_init() will not be able to detect the error. This patch fixes the bug. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=188641 Signed-off-by: Pan Bian <bianpan2016@163.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-11-24iio: tsl2583: make array large enoughDan Carpenter1-1/+1
This array is supposed to have 10 elements. Smatch complains that with the current code we can have n == max_ints and read beyond the end of the array. Fixes: ac4f6eee8fe8 ("staging: iio: TAOS tsl258x: Device driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Brian Masney <masneyb@onstation.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-11-13staging: iio: tsl2583: move out of stagingBrian Masney3-0/+921
Move tsl2580, tsl2581, tsl2583 driver out of staging into mainline. Signed-off-by: Brian Masney <masneyb@onstation.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-10-23iio: light: ltr501: claim direct mode during raw writesAlison Schofield1-30/+51
Driver was checking for direct mode but not locking it. Use claim/release helper functions to guarantee the device stays in direct mode during all raw write operations. Signed-off-by: Alison Schofield <amsfield22@gmail.com> Acked-by: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-10-23iio: light: ltr501: claim direct mode during select raw readsAlison Schofield1-10/+20
Driver was checking for direct mode but not locking it. Use claim/release helper functions to guarantee the device stays in direct mode during required raw read cases. Signed-off-by: Alison Schofield <amsfield22@gmail.com> Acked-by: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-10-23staging: iio: isl29018: move out of stagingBrian Masney3-0/+860
Move ISL29018/ISL29023/ISL29035 driver out of staging into mainline. Signed-off-by: Brian Masney <masneyb@onstation.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-09-27drivers: iio: light: Fix sparse warningsSandhya Bankar1-2/+3
Fixing below warnings: drivers/iio/light/max44000.c:217:18: warning: cast to restricted __be16 drivers/iio/light/max44000.c:217:18: warning: cast to restricted __be16 drivers/iio/light/max44000.c:217:18: warning: cast to restricted __be16 drivers/iio/light/max44000.c:217:18: warning: cast to restricted __be16 Signed-off-by: Sandhya Bankar <bankarsandhya512@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-09-18iio: light: Add driver for Silabs si1132, si1141/2/3 and si1145/6/7 ambient light, uv index and proximity sensorsPeter Meerwald-Stadler3-0/+1418
The si114x supports x=1,2,3 IR LEDs for proximity sensing together with visible and IR ambient light sensing (ALS). Newer parts (si1132, si1145/6/7) can measure UV light and compute an UV index This was tested on si1143 and si1145 Signed-off-by: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Signed-off-by: Crestez Dan Leonard <leonard.crestez@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-09-05Merge 4.8-rc5 into staging-nextGreg Kroah-Hartman1-1/+2
We want the staging fixes in here as well to handle merge issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-03Merge tag 'char-misc-4.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds1-1/+0
Pull char/misc driver fixes from Greg KH: "Here are a number of small driver fixes for 4.8-rc5. The largest thing here is deleting an obsolete driver, drivers/misc/bh1780gli.c, as the functionality of it was replaced by an iio driver a while ago. The other fixes are things that have been reported, or reverts of broken stuff (the binder change). All of these changes have been in linux-next for a while with no reported issues" * tag 'char-misc-4.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: thunderbolt: Don't declare Falcon Ridge unsupported thunderbolt: Add support for INTEL_FALCON_RIDGE_2C controller. thunderbolt: Fix resume quirk for Falcon Ridge 4C. lkdtm: Mark lkdtm_rodata_do_nothing() notrace mei: me: disable driver on SPT SPS firmware Revert "android: binder: fix dangling pointer comparison" drivers/iio/light/Kconfig: SENSORS_BH1780 cleanup android: binder: fix dangling pointer comparison misc: delete bh1780 driver
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.