aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/iio
AgeCommit message (Collapse)AuthorFilesLines
2013-09-14iio: sensors-core: st: Clean-up error handling in st_sensors_read_info_raw()Lee Jones1-7/+4
Saving a few lines of code. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-09-14iio: sensors-core: st: Allow full-scale to be an optional featureLee Jones2-6/+11
Some chips either don't support it or fail to provide adequate documentation, so sometimes it's impossible to enable the feature even if it is supported. Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Denis Ciocca <denis.ciocca@st.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-09-14iio: Add tsl4531 ambient light sensor driverPeter Meerwald3-0/+269
driver for the TSL4531 family of 16-bit I2C ambient light sensors; information is here: http://www.ams.com/eng/Products/Light-Sensors/Ambient-Light-Sensor-ALS/TSL45315 the chip offers simple lux output v3 (thanks Lars-Peter Clausen): * add mutex to when updating integration time * fix chip ID checking * code cleanups v2: * rename to tsl4351 * use INT_TIME Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-09-14iio: adjd_s311: Use INT_TIME channel infoPeter Meerwald1-51/+21
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-09-14iio: Add INT_TIME (integration time) channel info attributePeter Meerwald1-0/+1
Integration time is in seconds; it controls the measurement time and influences the gain of a sensor. There are two typical ways that scaling is implemented in a device: 1) input amplifier, 2) reference to the ADC is changed. These both result in the accuracy of the ADC varying (by applying its sampling over a more relevant range). Integration time is a way of dealing with noise inherent in the analog sensor itself. In the case of a light sensor, a mixture of photon noise and device specific noise. Photon noise is dealt with by either improving the efficiency of the sensor, (more photons actually captured) which is not easily varied dynamically, or by integrating the measurement over a longer time period. Note that this can also be thought of as an averaging of a number of individual samples and is infact sometimes implemented this way. Altering integration time implies that the duration of a measurement changes, a fact the device's user may be interested in. Hence it makes sense to distinguish between integration time and simple scale. In some devices both types of control are present and whilst they will have similar effects on the amplitude of the reading, their effect on the noise of the measurements will differ considerably. Used by adjd_s311, tsl4531, tcs3472 The following drivers have similar controls (and could be adapted): * tsl2563 (integration time is controlled via CALIBSCALE among other things) * tsl2583 (has integration_time device_attr, but driver doesn't use channels yet) * tsl2x7x (has integration_time attr) Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Cc: Jon Brenner <jon.brenner@ams.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-09-14iio: dac: ad5686: Remove redundant breakSachin Kamat1-1/+0
'break' after return is redundant. Remove it. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-09-14iio: gyro: adxrs450: Remove redundant breakSachin Kamat1-1/+0
'break' after return is redundant. Remove it. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-09-14iio: gyro: adis16260: Remove redundant breakSachin Kamat1-1/+0
'break' after return is redundant. Remove it. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-09-14iio: gyro: adis16130: Remove redundant breakSachin Kamat1-2/+0
'break' after return is redundant. Remove it. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-09-13Remove GENERIC_HARDIRQ config optionMartin Schwidefsky1-1/+0
After the last architecture switched to generic hard irqs the config options HAVE_GENERIC_HARDIRQS & GENERIC_HARDIRQS and the related code for !CONFIG_GENERIC_HARDIRQS can be removed. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-09-07iio: adc: Add driver for Microchip MCP3422/3/4 high resolution ADCAngelo Compagnucci3-0/+420
Sysfs access to all channels. Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-09-03Merge tag 'staging-3.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds103-1011/+4478
Pull staging tree merge from Greg KH: "Here's the bit staging tree pull request for 3.12-rc1. Lots of staging driver updates, and fixes. Lustre is finally enabled in the build, and lots of cleanup started happening in it. There's a new wireless driver in here, and 2 new TTY drivers, which cause the overall lines added/removed to be quite large on the "added" side. The IIO driver updates are also coming through here, as they are tied to the staging iio drivers" * tag 'staging-3.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (942 commits) staging: dwc2: make dwc2_core_params documentation more complete staging: dwc2: validate the value for phy_utmi_width staging: dwc2: interpret all hwcfg and related register at init time staging: dwc2: properly mask the GRXFSIZ register staging: dwc2: remove redundant register reads staging: dwc2: re-use hptxfsiz variable staging: dwc2: simplify debug output in dwc_hc_init staging: dwc2: add missing shift staging: dwc2: simplify register shift expressions staging: dwc2: only read the snpsid register once staging: dwc2: unshift non-bool register value constants staging: dwc2: fix off-by-one in check for max_packet_count parameter staging: dwc2: remove specific fifo size constants Staging:BCM:DDRInit.c:Renaming __FUNCTION__ staging: bcm: remove Version.h file. staging: rtl8188eu: off by one in rtw_set_802_11_add_wep() staging: r8188eu: copying one byte too much staging: rtl8188eu: || vs && typo staging: r8188eu: off by one bugs staging: crystalhd: Resolve sparse 'different base types' warnings. ...
2013-08-29iio: at91: Use different prescal, startup mask in MR for different IPJosh Wu1-2/+9
For at91 boards, there are different IPs for adc. Different IPs has different STARTUP & PRESCAL mask in ADC_MR. Signed-off-by: Josh Wu <josh.wu@atmel.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-08-29iio: at91: introduce the multiple compatible string for different IPs.Josh Wu1-38/+41
As use the multiple compatible string, we can remove hardware register in dt. CC: devicetree@vger.kernel.org Signed-off-by: Josh Wu <josh.wu@atmel.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-08-28iio: adc: twl6030-gpadc: fix error return code in twl6030_gpadc_read_raw()Wei Yongjun1-1/+1
Fix to return -EINTR in the error handling case instead of 0 (ret is assigned after goto, which has no effect), as done elsewhere in this function. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-08-28iio: add Bosch BMA180 acceleration sensor driverOleksandr Kravchenko3-0/+689
This patch adds IIO driver for Bosch BMA180 triaxial acceleration sensor. http://dlnmh9ip6v2uc.cloudfront.net/datasheets/ Sensors/Accelerometers/BST-BMA180-DS000-07_2.pdf Signed-off-by: Oleksandr Kravchenko <o.v.kravchenko@globallogic.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-08-19iio: dac: max517: Use devm_iio_device_allocSachin Kamat1-13/+4
Using devm_iio_device_alloc makes code simpler. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Roland Stigge <stigge@antcom.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-08-19iio: dac: ad7303: Use devm_* APIsSachin Kamat1-23/+8
devm_* APIs are device managed and make code simpler. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-08-19iio: dac: ad5791: Use devm_* APIsSachin Kamat1-26/+9
devm_* APIs are device managed and make code simpler. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-08-19iio: dac: ad5764: Use devm_* APIsSachin Kamat1-15/+5
devm_* APIs are device managed and make code simpler. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-08-19iio: dac: ad5755: Use devm_iio_device_allocSachin Kamat1-10/+4
Using devm_iio_device_alloc makes code simpler. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-08-19iio: dac: ad5686: Use devm_* APIsSachin Kamat1-13/+4
devm_* APIs are device managed and make code simpler. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-08-19iio: dac: ad5624r_spi: Use devm_* APIsSachin Kamat1-16/+6
devm_* APIs are device managed and make code simpler. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-08-19iio: dac: ad5504: Use devm_* APIsSachin Kamat1-23/+8
devm_* APIs are device managed and make code simpler. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-08-19iio: dac: ad5449: Use devm_* APIsSachin Kamat1-11/+4
devm_* APIs are device managed and make code simpler. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-08-19iio: dac: ad5446: Use devm_* APIsSachin Kamat1-14/+5
devm_* APIs are device managed and make code simpler. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-08-19iio: dac: ad5421: Use devm_* APIsSachin Kamat1-15/+4
devm_* APIs are device managed and make code simpler. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-08-19iio: dac: ad5380: Use devm_* APIsSachin Kamat1-14/+4
devm_* APIs are device managed and make code simpler. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-08-19iio: dac: ad5360: Use devm_* APIsSachin Kamat1-11/+4
devm_* APIs are device managed and make code simpler. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-08-19iio: dac: ad5064: Use devm_* APIsSachin Kamat1-15/+6
devm_* APIs are device managed and make code simpler. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-08-19iio: adc: twl6030-gpadc: Use devm_* API familyOleksandr Kozaruk1-26/+10
Using devm_iio_device_alloc and devm_request_threaded_irq makes code simpler. Signed-off-by: Oleksandr Kozaruk <oleksandr.kozaruk@ti.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-08-19iio: adjd_s311: Cleanup unused #definesPeter Meerwald1-18/+10
using word reads, no need for HI/LO register #defines Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-08-19iio: Remove unnecessary _write_raw_get_fmt() in several hid-sensor driversPeter Meerwald4-32/+0
IIO_VAL_INT_PLUS_MICRO is the default, no need to return it explicitly Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Acked-by: srinivas pandruvada <srinivas.pandruvada@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-08-19iio: adjd_s311: Fix non-scan mode data readPeter Meerwald1-1/+2
forgot to convert channel index to data register Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-08-17iio: trigger: implement devm_iio_trigger_alloc/devm_iio_triger_freeJacek Anaszewski1-4/+68
Add a resource managed devm_iio_trigger_alloc()/devm_iio_triger_free() to automatically clean up triggers allocated by IIO drivers, thus leading to simplified IIO drivers code. Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Kyunmin Park <kyungmin.park@samsung.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-08-17iio: twl6030-gpadc: TWL6030, TWL6032 GPADC driverOleksandr Kozaruk3-0/+1044
The GPADC is general purpose ADC found on TWL6030, and TWL6032 PMIC, known also as Phoenix and PhoenixLite. The TWL6030 and TWL6032 have GPADC with 17 and 19 channels respectively. Some channels have current source and are used for measuring voltage drop on resistive load for detecting battery ID resistance, or measuring voltage drop on NTC resistors for external temperature measurements. Some channels measure voltage, (i.e. battery voltage), and have voltage dividers, thus, capable to scale voltage. Some channels are dedicated for measuring die temperature. Some channels are calibrated in 2 points, having offsets from ideal values kept in trim registers. This is used to correct measurements. The differences between GPADC in TWL6030 and TWL6032: - 10 bit vs 12 bit ADC; - 17 vs 19 channels; - channels have different purpose(i.e. battery voltage channel 8 vs channel 18); - trim values are interpreted differently. Based on the driver patched from Balaji TK, Graeme Gregory, Ambresh K, Girish S Ghongdemath. Signed-off-by: Balaji T K <balajitk@ti.com> Signed-off-by: Graeme Gregory <gg@slimlogic.co.uk> Signed-off-by: Oleksandr Kozaruk <oleksandr.kozaruk@ti.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-08-17iio: gyro: st_gyro: Use devm_iio_device_allocSachin Kamat3-23/+8
Using devm_iio_device_alloc makes code simpler. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Denis Ciocca <denis.ciocca@st.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-08-17iio: gyro: itg3200_core: Use devm_iio_device_allocSachin Kamat1-11/+4
Using devm_iio_device_alloc makes code simpler. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Christian Strobel <christian.strobel@iis.fraunhofer.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-08-17iio: gyro: adxrs450: Use devm_iio_device_allocSachin Kamat1-11/+4
Using devm_iio_device_alloc makes code simpler. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-08-17iio: hid-sensor-gyro-3d: Use devm_iio_device_allocSachin Kamat1-12/+5
Using devm_iio_device_alloc makes code simpler. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Srinivas Pandruvada <srinivas.pandruvada@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-08-17iio: gyro: adis16260: Use devm_iio_device_allocSachin Kamat1-11/+5
Using devm_iio_device_alloc makes code simpler. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-08-17iio: gyro: adis16136: Use devm_iio_device_allocSachin Kamat1-7/+3
Using devm_iio_device_alloc makes code simpler. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-08-17iio: gyro: adis16130: Use devm_iio_device_allocSachin Kamat1-19/+4
Using devm_iio_device_alloc makes code simpler. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-08-17iio: gyro: adis16080: Use devm_iio_device_allocSachin Kamat1-17/+4
Using devm_iio_device_alloc makes code simpler. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-08-17iio: Restore alphabetic order in MakefilePeter Meerwald1-1/+1
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-08-17iio: Add tmp006 IR temperature sensorPeter Meerwald5-0/+314
the TI TMP006 is a non-contact temperature sensor with I2C interface; it measures the surface temperature of a distance object using a thermopile to absorb IR energy emitted from the object the sensor has two channels: IR sensor voltage (16-bit) and reference temperature of the chip (14-bit); datasheet is here: http://www.ti.com/lit/ds/symlink/tmp006.pdf v2 (thanks to Grygorii Strashko, Lars-Peter Clausen, Jonathan Cameron for review comments): * power down device on driver remove * use sign_extend32() * style cleanup * add comments what channel raw LSBs mean * spelling of thermopile Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Jonathan Cameron <jic23@kernel.org> Cc: LM Sensors <lm-sensors@lm-sensors.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-08-12Merge 3.11-rc5 into staging-nextGreg Kroah-Hartman2-20/+44
We want the staging fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-05Revert "iio: add configuration option for debug support"Greg Kroah-Hartman2-9/+0
This reverts commit 98a5e9e99d05e9b6a14778b85631b55e8e349990. IIO, like the rest of the kernel, should rely on dynamic debugging, not have a special config option for it. That way, no user has to rebuild their kernel to have debug messages, which is a good thing, let's not revert back to the bad old days of the 2000's. Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-03iio:mcp4725: Use devm_iio_device_allocPeter Meerwald1-19/+7
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-08-03iio:vcnl4000: Use devm_iio_device_allocPeter Meerwald1-12/+4
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.