aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/infiniband/core/cache.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-10-22IB/core: Do not notify GID change event of an unregistered deviceParav Pandit1-7/+1
When IB device is undergoing unregistration, the GID cache is always cleaned up after all clients are unregistered with the below flow. __ib_unregister_device() disable_device() ib_cache_cleanup_one() gid_table_cleanup_one() cleanup_gid_table_port() There is no use in generating a GID change event at this stage, where there is no active client of the device and device is nearly unregistered. Link: https://lore.kernel.org/r/20191020065427.8772-4-leon@kernel.org Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Daniel Jurgens <danielj@mellanox.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-25RDMA/core: Annotate destroy of mutex to ensure that it is released as unlockedParav Pandit1-0/+1
While compiled with CONFIG_DEBUG_MUTEXES, the kernel ensures that mutex is not held during destroy. Hence add mutex_destroy() for mutexes used in RDMA modules. Link: https://lore.kernel.org/r/20190723065733.4899-2-leon@kernel.org Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-07IB/core, ipoib: Do not overreact to SM LID change eventDennis Dalessandro1-1/+0
When IPoIB receives an SM LID change event, it reacts by flushing its path record cache and rejoining multicast groups. This is the same behavior it performs when it receives a reregistration event. This behavior is unnecessary as an SM may have database backup or synchronization mechanisms which permit the SM location or LID to change without loss of multicast membership and without impact to path records. Both opensm and the OPA FM issue reregistration events if a new SM is started (or restarted with a new config) or an SM event occurs which results in loss of multicast membership records by the SM (such as opensm failover) or the SM encounters new nodes with Active ports (such as after joining 2 fabrics by connecting switches via ISLs). Hence this event can be depended on as the trigger for IPoIB cache and multicast flushing. It appears that some drivers, such as qib, and hfi1 issue the IB_EVENT_SM_CHANGE but other drivers such as mlx4 and mlx5 do not. Empirical testing on Mellanox EDR using ibv_asyncwatch has confirmed that Mellanox EDR HCAs do not generate SM change events and that opensm does generate reregistration. An SM LID change event is generated by the mentioned drivers to reflect that sm_lid and/or sm_sl in the local port info has changed. The intent of this event is to permit applications and ULPs which have a local copy of this information (or an address handle using it) to update their information. The intent is that the reregistration event (caused by the SM via a bit in Set(PortInfo)) be used to inform nodes that they need to rejoin multicast groups, resubscribe for notices and potentially update path records. When an SM migrates or fails over, a SM LID change event can occur. In response IPoIB discards path records and multicast membership and loses connectivity until these records are restored via SA requests. In very large fabrics, it may take minutes for the SM to be ready and for the SA responses to be supplied. This can result in undesirable and unnecessary IPoIB connectivity impacts. It also can result in an unnecessary storm of SA queries from all nodes in a cluster potentially followed by yet another storm if the SM issues the reregistration request. The fact the Mellanox HCAs do not even generate this event, is further evidence that on modern IB fabrics there will be no ill side effects from the proposed changes below to reduce the reaction by 3 kernel components to this event. So these changes should be benign for Mellanox IB fabrics and will benefit OPA fabrics while also making ib_core and ULP behavor "correct" as intended by the IBTA spec and kernel RDMA event APIs. Address these issues by removing IB_EVENT_SM_CHANGE handling from ipoib. IPoIB does not locally store sm_lid nor sm_sl, so it does not need to do anything on SM LID change. IPoIB makes use of other ib_core components to issue SA requests for it and those components correctly track SM LID and SM LID changes. Also in ib_core multicast handling, remove the test for IB_EVENT_SM_CHANGE. This code is moving all multicast groups to the error state, which will trigger rejoins. This code is used by IPoIB as well as the connection manager and other clients of multicast groups. This kernel module centralizes group membership status and joins since a node can only join a given group once but multiple ULPs or applications may want to join the same group. It makes use of the sa_query.c component in ib_core, which correctly trackes SM LID and SL. This component does not track SM LID nor SL itself and hence need not react to their changes. Similarly in the ib_core cache code remove the handling for the IB_EVENT_SM_CHANGE. In this function. The ib_cache_update function which is ultimately called is updating local copies of the pkey table, gid table and lmc. It does not update nor retain sm_lid nor sm_sl. As such it does not need to be called on an SM LID change. It technically also does not need to be called on a reregistration. The LID_CHANGE, PKEY_CHANGE, GID_CHANGE and port state change events (PORT_ERR, PORT_ACTICE) should be sufficient triggers. It is worth noting that the alternative of simply having the hfi1 and qib drivers not generate the SM LID change event was explored. While this would duplicate what Mellanox drivers do now, it is not the correct behavior and removes the ability for an SM to migrate without requiring reregistration. Since both opensm and OPA SM have mechanisms to backup or synchronize registration information, it is desirable to let them perform SM migrations (with LID or SL changes) without requiring reregistration when they deem it appropriate. Suggested-by: Todd Rimmer <todd.rimmer@intel.com> Tested-by: Michael Brooks <michael.brooks@intel.com> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Todd Rimmer <todd.rimmer@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-03RDMA/core: Allow detaching gid attribute netdevice for RoCEParav Pandit1-12/+61
When there is active traffic through a GID, a QP/AH holds reference to this GID entry. RoCE GID entry holds reference to its attached netdevice. Due to this when netdevice is deleted by admin user, its refcount is not dropped. Therefore, while deleting RoCE GID, wait for all GID attribute's netdev users to finish accessing netdev in rcu context. Once all users done accessing it, release the netdev refcount. Signed-off-by: Huy Nguyen <huyn@mellanox.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-03RDMA/cma: Use rdma_read_gid_attr_ndev_rcu to access netdevParav Pandit1-0/+1
To access the netdevice of the GID attribute, use an existing API rdma_read_gid_attr_ndev_rcu(). This further reduces dependency on open access to netdevice of GID attribute. Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-03RDMA: Introduce and use GID attr helper to read RoCE L2 fieldsParav Pandit1-0/+55
Instead of RoCE drivers figuring out vlan, smac fields while working on QP/AH, provide a helper routine to read the L2 fields such as vlan_id and source mac address. This moves logic from mlx5 driver to core for wider usage for RoCE ports. This is a preparation patch to allow detaching netdev in subsequent patch. Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-24IB/core: Allow vlan link local address based RoCE GIDsParav Pandit1-23/+4
IPv6 link local address for a VLAN netdevice has nothing to do with its resemblance with the default GID, because VLAN link local GID is in different layer 2 domain. Now that RoCE MAD packet processing and route resolution consider the right GID index, there is no need for an unnecessary check which prevents the addition of vlan based IPv6 link local GIDs. Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-19RDMA/device: Add ib_device_set_netdev() as an alternative to get_netdevJason Gunthorpe1-13/+11
The associated netdev should not actually be very dynamic, so for most drivers there is no reason for a callback like this. Provide an API to inform the core code about the net dev affiliation and use a core maintained data structure instead. This allows the core code to be more aware of the ndev relationship which will allow some new APIs based around this. This also uses locking that makes some kind of sense, many drivers had a confusing RCU lock, or missing locking which isn't right. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-19RDMA/cache: Move the cache per-port data into the main ib_port_dataJason Gunthorpe1-58/+31
Like the other cases there no real reason to have another array just for the cache. This larger conversion gets its own patch. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-19RDMA/device: Consolidate ib_device per_port data into one placeJason Gunthorpe1-2/+2
There is no reason to have three allocations of per-port data. Combine them together and make the lifetime for all the per-port data match the struct ib_device. Following patches will require more port-specific data, now there is a good place to put it. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-19RDMA: Add and use rdma_for_each_portJason Gunthorpe1-3/+3
We have many loops iterating over all of the end port numbers on a struct ib_device, simplify them with a for_each helper. Reviewed-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-08RDMA/device: Call ib_cache_release_one() only from ib_device_release()Jason Gunthorpe1-0/+3
Instead of complicated logic about when this memory is freed, always free it during device release(). All the cache pointers start out as NULL, so it is safe to call this before the cache is initialized. This makes for a simpler error unwind flow, and a simpler understanding of the lifetime of the memory allocations inside the struct ib_device. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-12-18RDMA/core: Delete RoCE GID in hw when corresponding IP is deletedParav Pandit1-4/+3
Currently a RoCE GID entry is removed from the hardware when all references to the GID entry drop to zero. This is a change in behavior from before the fixed patch. The GID entry should be removed from the hardware when GID entry deletion is requested. This allows the driver terminate ongoing traffic through the RoCE GID. While a GID is deleted from the hardware, GID slot in the software GID cache is not freed. GID slot is freed once all references of such GID are dropped. This continue to ensure that such GID slot of hardware is not allocated to new GID entry allocation request. It is allocated once all references to GID entry drop. This approach allows drivers to put a tombestone of some kind on the HW GID index to block the traffic. Fixes: b150c3862d21 ("IB/core: Introduce GID entry reference counts") Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-12-12RDMA: Start use ib_device_opsKamal Heib1-6/+6
Make all the required change to start use the ib_device_ops structure. Signed-off-by: Kamal Heib <kamalheib1@gmail.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-10-16Merge branch 'for-rc' into rdma.git for-nextJason Gunthorpe1-33/+33
From git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma.git This is required to resolve dependencies of the next series of RDMA patches. The code motion conflicts in drivers/infiniband/core/cache.c were resolved. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-09-26RDMA/core: Use dev_err/dbg/etc instead of pr_* + ibdev->nameJason Gunthorpe1-24/+22
Any messages related to a device should be printed with the dev_* formatters. This provides greater consistency for the user. The core does not set pr_fmt so this has no significant change. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
2018-09-25RDMA/core: Set right entry state before releasing referenceParav Pandit1-34/+34
Currently add_modify_gid() for IB link layer has followong issue in cache update path. When GID update event occurs, core releases reference to the GID table without updating its state and/or entry pointer. CPU-0 CPU-1 ------ ----- ib_cache_update() IPoIB ULP add_modify_gid() [..] put_gid_entry() refcnt = 0, but state = valid, entry is valid. (work item is not yet executed). ipoib_create_ah() rdma_create_ah() rdma_get_gid_attr() <-- Tries to acquire gid_attr which has refcnt = 0. This is incorrect. GID entry state and entry pointer is provides the accurate GID enty state. Such fields must be updated with rwlock to protect against readers and, such fields must be in sane state before refcount can drop to zero. Otherwise above race condition can happen leading to use-after-free situation. Following backtrace has been observed when cache update for an IB port is triggered while IPoIB ULP is creating an AH. Therefore, when updating GID entry, first mark a valid entry as invalid through state and set the barrier so that no callers can acquired the GID entry, followed by release reference to it. refcount_t: increment on 0; use-after-free. WARNING: CPU: 4 PID: 29106 at lib/refcount.c:153 refcount_inc_checked+0x30/0x50 Workqueue: ib-comp-unb-wq ib_cq_poll_work [ib_core] RIP: 0010:refcount_inc_checked+0x30/0x50 RSP: 0018:ffff8802ad36f600 EFLAGS: 00010082 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000002 RSI: 0000000000000008 RDI: ffffffff86710100 RBP: ffff8802d6e60a30 R08: ffffed005d67bf8b R09: ffffed005d67bf8b R10: 0000000000000001 R11: ffffed005d67bf8a R12: ffff88027620cee8 R13: ffff8802d6e60988 R14: ffff8802d6e60a78 R15: 0000000000000202 FS: 0000000000000000(0000) GS:ffff8802eb200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f3ab35e5c88 CR3: 00000002ce84a000 CR4: 00000000000006e0 IPv6: ADDRCONF(NETDEV_CHANGE): ib1: link becomes ready Call Trace: rdma_get_gid_attr+0x220/0x310 [ib_core] ? lock_acquire+0x145/0x3a0 rdma_fill_sgid_attr+0x32c/0x470 [ib_core] rdma_create_ah+0x89/0x160 [ib_core] ? rdma_fill_sgid_attr+0x470/0x470 [ib_core] ? ipoib_create_ah+0x52/0x260 [ib_ipoib] ipoib_create_ah+0xf5/0x260 [ib_ipoib] ipoib_mcast_join_complete+0xbbe/0x2540 [ib_ipoib] Fixes: b150c3862d21 ("IB/core: Introduce GID entry reference counts") Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-09-12RDMA/core: Introduce rdma_read_gid_attr_ndev_rcu() to check GID attributeParav Pandit1-0/+33
Introduce an API rdma_read_gid_attr_ndev_rcu() to return GID attribute netdevice which is in UP state for accessing netdevice's fields such as net namespace and ifindex. This is useful for users who intent to access netdevice fields under rcu lock. Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-07-09RDMA/core: Remove set-but-not-used variablesBart Van Assche1-6/+0
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-07-09RDMA/core: Remove ib_find_cached_gid() and ib_find_cached_gid_by_port()Bart Van Assche1-38/+0
Remove these two functions since all their callers have been removed. See also commit ea8c2d8f6014 ("RDMA/core: Remove unused ib cache functions"). Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-06-25RDMA/core: Remove unused ib cache functionsJason Gunthorpe1-68/+0
Now that all users have been converted to use the version of these APIs that returns a gid_attr pointer we can delete the old entry points. Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2018-06-22IB/core: Free GID table entry during GID deletionParav Pandit1-5/+23
If we already hold the table->lock when doing the kref_put it means we are in a context where it is safe to do the deletion synchronously, with no need for the work queue. This helps to eliminate issues when GID change is requested as part of MAC address change or bonding event change where expectation is to replace the GID almost immediately. Fixes: b150c3862d21 ("IB/core: Introduce GID entry reference counts") Reviewed-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-06-18IB/core: Make rdma_find_gid_by_filter support all protocolsJason Gunthorpe1-17/+8
There is no reason to restrict this function to roce only these days, allow the filter function to be called on any protocol. Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-06-18IB/core: Provide rdma_ versions of the gid cache APIJason Gunthorpe1-103/+161
These versions are functionally similar but all return gid_attrs and related information via reference instead of via copy. The old API is preserved, implemented as wrappers around the new, until all callers can be converted. Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-06-18IB/core: Introduce GID attribute get, put and hold APIsParav Pandit1-0/+86
This patch introduces three APIs, rdma_get_gid_attr(), rdma_put_gid_attr(), and rdma_hold_gid_attr() which expose the reference counting for GID table entries to the entire stack. The kref counting is based on the struct ib_gid_attr pointer Later patches will convert more cache query function to return struct ib_gid_attrs. Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-06-18RDMA: Use GID from the ib_gid_attr during the add_gid() callbackParav Pandit1-1/+1
Now that ib_gid_attr contains the GID, make use of that in the add_gid() callback functions for the provider drivers to simplify the add_gid() implementations. Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-06-18IB/core: Introduce GID entry reference countsParav Pandit1-103/+220
In order to be able to expose pointers to the ib_gid_attrs in the GID table we need to make it so the value of the pointer cannot be changed. Thus each GID table entry gets a unique piece of kref'd memory that is written only during initialization and remains constant for its lifetime. This eventually will allow the struct ib_gid_attrs to be returned without copy from many of query the APIs, but it also provides a way to track when all users of a HW table index go away. For roce we no longer allow an in-use HW table index to be re-used for a new an different entry. When a GID table entry needs to be removed it is hidden from the find API, but remains as a valid HW index and all ib_gid_attr points remain valid. The HW index is not relased until all users put the kref. Later patches will broadly replace the use of the sgid_index integer with the kref'd structure. Ultimately this will prevent security problems where the OS changes the properties of a HW GID table entry while an active user object is still using the entry. Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-06-17IB/core: Store default GID property per-table instead of per-entryParav Pandit1-13/+24
There are at max one or two default GIDs for RoCE. Instead of storing a default GID property for all the GIDs, store default GID indices as individual bit per table. This allows a future simplification to get rid of the GID property field. Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-06-17IB/core: Do not set the gid type when reserving default entriesParav Pandit1-5/+0
When default GIDs are added, their gid type is set by ib_cache_gid_set_default_gid(). There is no need to set the gid type of a free GID entry during GID table initialization. Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook1-2/+3
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-07Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds1-63/+49
Pull rdma updates from Jason Gunthorpe: "This has been a quiet cycle for RDMA, the big bulk is the usual smallish driver updates and bug fixes. About four new uAPI related things. Not as much Szykaller patches this time, the bugs it finds are getting harder to fix. Summary: - More work cleaning up the RDMA CM code - Usual driver bug fixes and cleanups for qedr, qib, hfi1, hns, i40iw, iw_cxgb4, mlx5, rxe - Driver specific resource tracking and reporting via netlink - Continued work for name space support from Parav - MPLS support for the verbs flow steering uAPI - A few tricky IPoIB fixes improving robustness - HFI1 driver support for the '16B' management packet format - Some auditing to not print kernel pointers via %llx or similar - Mark the entire 'UCM' user-space interface as BROKEN with the intent to remove it entirely. The user space side of this was long ago replaced with RDMA-CM and syzkaller is finding bugs in the residual UCM interface nobody wishes to fix because nobody uses it. - Purge more bogus BUG_ON's from Leon - 'flow counters' verbs uAPI - T10 fixups for iser/isert, these are Acked by Martin but going through the RDMA tree due to dependencies" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (138 commits) RDMA/mlx5: Update SPDX tags to show proper license RDMA/restrack: Change SPDX tag to properly reflect license IB/hfi1: Fix comment on default hdr entry size IB/hfi1: Rename exp_lock to exp_mutex IB/hfi1: Add bypass register defines and replace blind constants IB/hfi1: Remove unused variable IB/hfi1: Ensure VL index is within bounds IB/hfi1: Fix user context tail allocation for DMA_RTAIL IB/hns: Use zeroing memory allocator instead of allocator/memset infiniband: fix a possible use-after-free bug iw_cxgb4: add INFINIBAND_ADDR_TRANS dependency IB/isert: use T10-PI check mask definitions from core layer IB/iser: use T10-PI check mask definitions from core layer RDMA/core: introduce check masks for T10-PI offload IB/isert: fix T10-pi check mask setting IB/mlx5: Add counters read support IB/mlx5: Add flow counters read support IB/mlx5: Add flow counters binding support IB/mlx5: Add counters create and destroy support IB/uverbs: Add support for flow counters ...
2018-06-06Merge tag 'overflow-v4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linuxLinus Torvalds1-2/+3
Pull overflow updates from Kees Cook: "This adds the new overflow checking helpers and adds them to the 2-factor argument allocators. And this adds the saturating size helpers and does a treewide replacement for the struct_size() usage. Additionally this adds the overflow testing modules to make sure everything works. I'm still working on the treewide replacements for allocators with "simple" multiplied arguments: *alloc(a * b, ...) -> *alloc_array(a, b, ...) and *zalloc(a * b, ...) -> *calloc(a, b, ...) as well as the more complex cases, but that's separable from this portion of the series. I expect to have the rest sent before -rc1 closes; there are a lot of messy cases to clean up. Summary: - Introduce arithmetic overflow test helper functions (Rasmus) - Use overflow helpers in 2-factor allocators (Kees, Rasmus) - Introduce overflow test module (Rasmus, Kees) - Introduce saturating size helper functions (Matthew, Kees) - Treewide use of struct_size() for allocators (Kees)" * tag 'overflow-v4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: treewide: Use struct_size() for devm_kmalloc() and friends treewide: Use struct_size() for vmalloc()-family treewide: Use struct_size() for kmalloc()-family device: Use overflow helpers for devm_kmalloc() mm: Use overflow helpers in kvmalloc() mm: Use overflow helpers in kmalloc_array*() test_overflow: Add memory allocation overflow tests overflow.h: Add allocation size calculation helpers test_overflow: Report test failures test_overflow: macrofy some more, do more tests for free lib: add runtime test of check_*_overflow functions compiler.h: enable builtin overflow checkers and add fallback code
2018-06-06treewide: Use struct_size() for kmalloc()-familyKees Cook1-2/+3
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; void *entry[]; }; instance = kmalloc(sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL); Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = kmalloc(struct_size(instance, entry, count), GFP_KERNEL); This patch makes the changes for kmalloc()-family (and kvmalloc()-family) uses. It was done via automatic conversion with manual review for the "CHECKME" non-standard cases noted below, using the following Coccinelle script: // pkey_cache = kmalloc(sizeof *pkey_cache + tprops->pkey_tbl_len * // sizeof *pkey_cache->table, GFP_KERNEL); @@ identifier alloc =~ "kmalloc|kzalloc|kvmalloc|kvzalloc"; expression GFP; identifier VAR, ELEMENT; expression COUNT; @@ - alloc(sizeof(*VAR) + COUNT * sizeof(*VAR->ELEMENT), GFP) + alloc(struct_size(VAR, ELEMENT, COUNT), GFP) // mr = kzalloc(sizeof(*mr) + m * sizeof(mr->map[0]), GFP_KERNEL); @@ identifier alloc =~ "kmalloc|kzalloc|kvmalloc|kvzalloc"; expression GFP; identifier VAR, ELEMENT; expression COUNT; @@ - alloc(sizeof(*VAR) + COUNT * sizeof(VAR->ELEMENT[0]), GFP) + alloc(struct_size(VAR, ELEMENT, COUNT), GFP) // Same pattern, but can't trivially locate the trailing element name, // or variable name. @@ identifier alloc =~ "kmalloc|kzalloc|kvmalloc|kvzalloc"; expression GFP; expression SOMETHING, COUNT, ELEMENT; @@ - alloc(sizeof(SOMETHING) + COUNT * sizeof(ELEMENT), GFP) + alloc(CHECKME_struct_size(&SOMETHING, ELEMENT, COUNT), GFP) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-05-29RDMA/core: Remove indirection through ib_cache_setup()Jason Gunthorpe1-10/+0
This once might have made sense when cache.c was in a different module from device.c, but today it just obfuscation. Get rid of the wrappers and call roge_gid_mgmt_init()/cleanup() directly. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
2018-05-29IB/core: Fix error code for invalid GID entryParav Pandit1-1/+1
When a GID entry is invalid EAGAIN is returned. This is an incorrect error code, there is nothing that will make this GID entry valid again in bounded time. Some user space tools fail incorrectly if EAGAIN is returned here, and this represents a small ABI change from earlier kernels. The first patch in the Fixes list makes entries that were valid before to become invalid, allowing this code to trigger, while the second patch in the Fixes list introduced the wrong EAGAIN. Therefore revert the return result to EINVAL which matches the historical expectations of the ibv_query_gid_type() API of the libibverbs user space library. Cc: <stable@vger.kernel.org> Fixes: 598ff6bae689 ("IB/core: Refactor GID modify code for RoCE") Fixes: 03db3a2d81e6 ("IB/core: Add RoCE GID table management") Reviewed-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-05-24IB/core: Introduce and use rdma_gid_table()Parav Pandit1-10/+15
There are several places a gid table is accessed. Have a helper tiny function rdma_gid_table() to avoid code duplication at such places. Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-05-24IB/core: Reduce the places that use zgidParav Pandit1-5/+14
Instead of open coding memcmp() to check whether a given GID is zero or not, use a helper function to do so, and replace instances of memcpy(z,&zgid) with memset. Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-05-09Merge branch 'k.o/for-rc' into k.o/wip/dl-for-nextDoug Ledford1-20/+35
Several items of conflict have arisen between the RDMA stack's for-rc branch and upcoming for-next work: 9fd4350ba895 ("IB/rxe: avoid double kfree_skb") directly conflicts with 2e47350789eb ("IB/rxe: optimize the function duplicate_request") Patches already submitted by Intel for the hfi1 driver will fail to apply cleanly without this merge Other people on the mailing list have notified that their upcoming patches also fail to apply cleanly without this merge Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-05-09IB/core: Reuse gid_table_release_one() in table allocation failureParav Pandit1-26/+16
_gid_table_setup_one() only performs GID table cache memory allocation, marks entries as invalid (free) and marks the reserved entries. At this point GID table is empty and no entries are added. On dual port device if _gid_table_setup_one() fails to allocate the gid table for 2nd port, there is no need to perform cleanup_gid_table_port() to delete GID entries, as GID table is empty. Therefore make use of existing gid_table_release_one() routine which frees the GID table memory and avoid code duplication. Reviewed-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-05-09IB/core: Make gid_table_reserve_default() return voidParav Pandit1-13/+5
gid_table_reserve_default() always returns zero. Make it return void and simplify error checking. rdma_port is already calculated, use that while calling gid_table_reserve_default() instead of recalculating it. Reviewed-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-04-23IB/core: Fix deleting default GIDs when changing mac adddressParav Pandit1-13/+15
Before [1], When MAC address of the netdevice is changed, default GID is supposed to get deleted and added back which affects the node and/or port GUID in below sequence. netdevice_event() -> NETDEV_CHANGEADDR default_del_cmd() del_netdev_default_ips() bond_delete_netdev_default_gids() ib_cache_gid_set_default_gid() ib_cache_gid_del() add_cmd() [..] However, ib_cache_gid_del() was not getting invoked in non bonding scenarios because event_ndev and rdma_ndev are same. Therefore, fix such condition to ignore checking upper device when event ndev and rdma_dev are same; similar to bond_set_netdev_default_gids(). Which this fix ib_cache_gid_del() is invoked correctly; however ib_cache_gid_del() doesn't find the default GID for deletion because find_gid() was given default_gid = false with GID_ATTR_FIND_MASK_DEFAULT set. But it was getting overwritten by ib_cache_gid_set_default_gid() later on as part of add_cmd(). Therefore, mac address change used to work for default GID. With refactor series [1], this incorrect behavior is detected. Therefore, when deleting default GID, set default_gid and set MASK flag. when deleting IP based GID, clear default_gid and set MASK flag. [1] https://patchwork.kernel.org/patch/10319151/ Fixes: 238fdf48f2b5 ("IB/core: Add RoCE table bonding support") Fixes: 598ff6bae689 ("IB/core: Refactor GID modify code for RoCE") Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-04-23IB/core: Fix to avoid deleting IPv6 look alike default GIDsParav Pandit1-4/+13
When IPv6 link local address is removed, if it matches with the default GID, default GID(s)s gets removed which may not be a desired behavior. This behavior is introduced by refactor work in Fixes tag. When IPv6 link address is removed, removing its equivalent RoCEv2 GID which exactly matches with default RoCEv2 GID, is right thing to do. However achieving it correctly requires lot more changes, likely in roce_gid_mgmt.c and core/cache.c. This should be done as independent patch. Therefore, this patch preserves behavior of not deleteing default GIDs. This is done by providing explicit hint to consider default GID property using mask and default_gid; similar to add_gid(). Fixes: 598ff6bae68 ("IB/core: Refactor GID modify code for RoCE") Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-04-23IB/core: Don't allow default GID addition at non reseved slotsParav Pandit1-8/+12
Default GIDs are marked reserved at the start of the GID table at index 0 and 1 by gid_table_reserve_default(). Currently when default GID is requested, it can still allocates an empty slot which was not marked as RESERVED for default GID, which is incorrect. At least in current code flow of roce_gid_mgmt.c, in theory we can still request to allocate more than one/two default GIDs depending on how upper devices are setup. Therefore, it is better for cache layer to only allow our reserved slots to be used by default GID allocation requests. Fixes: 598ff6bae689 ("IB/core: Refactor GID modify code for RoCE") Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-04-03RDMA: Use ib_gid_attr during GID modificationParav Pandit1-3/+2
Now that ib_gid_attr contains device, port and index, simplify the provider APIs add_gid() and del_gid() to use device, port and index fields from the ib_gid_attr attributes structure. Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-04-03IB/core: Refactor GID modify code for RoCEParav Pandit1-231/+253
Code is refactored to prepare separate functions for RoCE which can do more complex operations related to reference counting, while still maintainining code readability. This includes (a) Simplification to not perform netdevice checks and modifications for IB link layer. (b) Do not add RoCE GID entry which has NULL netdevice; instead return an error. (c) If GID addition fails at provider level add_gid(), do not add the entry in the cache and keep the entry marked as INVALID. (d) Simplify and reuse the ib_cache_gid_add()/del() routines so that they can be used even for modifying default GIDs. This avoid some code duplication in modifying default GIDs. (e) find_gid() routine refers to the data entry flags to qualify a GID as valid or invalid GID rather than depending on attributes and zeroness of the GID content. (f) gid_table_reserve_default() sets the GID default attribute at beginning while setting up the GID table. There is no need to use default_gid flag in low level functions such as write_gid(), add_gid(), del_gid(), as they never need to update the DEFAULT property of the GID entry while during GID table update. As as result of this refactor, reserved GID 0:0:0:0:0:0:0:0 is no longer searchable as described below. A unicast GID entry of 0:0:0:0:0:0:0:0 is Reserved GID as per the IB spec version 1.3 section 4.1.1, point (6) whose snippet is below. "The unicast GID address 0:0:0:0:0:0:0:0 is reserved - referred to as the Reserved GID. It shall never be assigned to any endport. It shall not be used as a destination address or in a global routing header (GRH)." GID table cache now only stores valid GID entries. Before this patch, Reserved GID 0:0:0:0:0:0:0:0 was searchable in the GID table using ib_find_cached_gid_by_port() and other similar find routines. Zero GID is no longer searchable as it shall not to be present in GRH or path recored entry as described in IB spec version 1.3 section 4.1.1, point (6), section 12.7.10 and section 12.7.20. ib_cache_update() is simplified to check link layer once, use unified locking scheme for all link layers, removed temporary gid table allocation/free logic. Additionally, (a) Expand ib_gid_attr to store port and index so that GID query routines can get port and index information from the attribute structure. (b) Expand ib_gid_attr to store device as well so that in future code when GID reference counting is done, device is used to reach back to the GID table entry. Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-04-03IB/core: Simplify ib_query_gid to always refer to cacheParav Pandit1-2/+2
Currently following inconsistencies exist. 1. ib_query_gid() returns GID from the software cache for a RoCE port and returns GID from the HCA for an IB port. This is incorrect because software GID cache is maintained regardless of HCA port type. 2. GID is queries from the HCA via ib_query_gid and updated in the software cache for IB link layer. Both of them might not be in sync. ULPs such as SRP initiator, SRP target, IPoIB driver have historically used ib_query_gid() API to query the GID. However CM used cached version during CM processing, When software cache was introduced, this inconsitency remained. In order to simplify, improve readability and avoid link layer specific above inconsistencies, this patch brings following changes. 1. ib_query_gid() always refers to the cache layer regardless of link layer. 2. cache module who reads the GID entry from HCA and builds the cache, directly invokes the HCA provider verb's query_gid() callback function. 3. ib_query_port() is being called in early stage where GID cache is not yet build while reading port immutable property. Therefore it needs to read the default GID from the HCA for IB link layer to publish the subnet prefix. Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-27IB/core: Refer to RoCE port property to decide building cacheParav Pandit1-2/+2
IB core maintains the GID cache entries for the GID table. This cache table has to be maintained regardless of HCA's support of GID table. For IB and iWarp ports, cache is created by querying the HCA. For RoCE cache is created based on netdev events. Therefore just refer to the RoCE port property of the {device, port} to decide whether to build cache by querying HCA or from netdev events. There is no need to check if HCA support GID table or not. ib_cache_update() referred to RoCE attribute before validating port. Though in all current callers port is valid, it is incorrect to query RoCE port property before validating the port. Therefore, rdma_protocol_roce() check is done after rdma_is_port_valid() verifies that port is valid. Fixes: 115b68aa6ea4 ("IB/ocrdma: Removed GID add/del null routines") Reviewed-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-27IB/core: Refer to RoCE port property instead of GID table propertyParav Pandit1-1/+1
ib_find_gid_by_filter() searches GID with filter only for RoCE link layer regardless of HCA's support for GID table. Therefore, right way to lookup is compare RoCE port property and not the GID table property. Fixes: 99b27e3b5da0 ("IB/cache: Add ib_find_gid_by_filter cache API") Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-27IB/core: Generate GID change event regardless of RoCE GID table propertyParav Pandit1-7/+5
Due to following reasons, GID table event is generated regardless of GID table property. 1. GID table cache is maintained at ib core layer regardless of link layer. 2. GID change event has no relation with IB link layer. 3. GID change event also doesn't depend on whether HCA supports GID table or not. Fixes: f3906bd36087 ("IB/core: Refactor GID cache's ib_dispatch_event") Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-19IB/core: Use rdma_is_port_valid()Parav Pandit1-3/+2
Use rdma_is_port_valid() which performs port validity check instead of open coding the same check. Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.