aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/infiniband/core/cma.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2008-01-25RDMA/cma: Override default responder_resources with user valueSean Hefty1-23/+19
By default, the responder_resources parameter is set to that received in a connection request. The passive side may override this value when accepting the connection. Use the value provided by the passive side when transitioning the QP to RTR state, rather than the value given in the connect request. Without this change, the RTR transition may fail if the passive side supports fewer responder_resources than that in the request. For code consistency and to protect against QP destruction, restructure overriding initiator_depth to match how responder_resources is set. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-01-25IPoIB: improve IPv4/IPv6 to IB mcast mapping functionsRolf Manderscheid1-3/+1
An IPoIB subnet on an IB fabric that spans multiple IB subnets can't use link-local scope in multicast GIDs. The existing routines that map IP/IPv6 multicast addresses into IB link-level addresses hard-code the scope to link-local, and they also leave the partition key field uninitialised. This patch adds a parameter (the link-level broadcast address) to the mapping routines, allowing them to initialise both the scope and the P_Key appropriately, and fixes up the call sites. The next step will be to add a way to configure the scope for an IPoIB interface. Signed-off-by: Rolf Manderscheid <rvm@obsidianresearch.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-01-25RDMA/cma: Reenable device removal on passive sideVladimir Sokolovsky1-1/+3
Enable conn_id remove on the passive side after connection establishment. This corrects an issue where the IB driver can't be unloaded after running applications over RDS. The 'dev_remove' counter does not reach 0 for established connections on the passive side. This problem is limited to device removal, and only occurs on the passive side if there are established connections. Signed-off-by: Vladimir Sokolovsky <vlad@mellanox.co.il> Reviewed-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-01-25RDMA/iwcm: Set initiator depth and responder resources to device max valuesSteve Wise1-0/+10
Set the initiator depth and responder resources to the device max values for new connect request events in the iWARP connection manager. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-23Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infinibandLinus Torvalds1-77/+83
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: mlx4_core: Increase command timeout for INIT_HCA to 10 seconds IPoIB/cm: Use common CQ for CM send completions IB/uverbs: Fix checking of userspace object ownership IB/mlx4: Sanity check userspace send queue sizes IPoIB: Rewrite "if (!likely(...))" as "if (unlikely(!(...)))" IB/ehca: Enable large page MRs by default IB/ehca: Change meaning of hca_cap_mr_pgsize IB/ehca: Fix ehca_encode_hwpage_size() and alloc_fmr() IB/ehca: Fix masking error in {,re}reg_phys_mr() IB/ehca: Supply QP token for SRQ base QPs IPoIB: Use round_jiffies() for ah_reap_task RDMA/cma: Fix deadlock destroying listen requests RDMA/cma: Add locking around QP accesses IB/mthca: Avoid alignment traps when writing doorbells mlx4_core: Kill mlx4_write64_raw()
2007-10-18[INET]: Justification for local port range robustness.Anton Arapov1-2/+3
There is a justifying patch for Stephen's patches. Stephen's patches disallows using a port range of one single port and brakes the meaning of the 'remaining' variable, in some places it has different meaning. My patch gives back the sense of 'remaining' variable. It should mean how many ports are remaining and nothing else. Also my patch allows using a single port. I sure we must be able to use mentioned port range, this does not restricted by documentation and does not brake current behavior. usefull links: Patches posted by Stephen Hemminger http://marc.info/?l=linux-netdev&m=119206106218187&w=2 http://marc.info/?l=linux-netdev&m=119206109918235&w=2 Andrew Morton's comment http://marc.info/?l=linux-kernel&m=119248225007737&w=2 1. Allows using a port range of one single port. 2. Gives back sense of 'remaining' variable. Signed-off-by: Anton Arapov <aarapov@redhat.com> Acked-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-16RDMA/cma: Fix deadlock destroying listen requestsSean Hefty1-47/+23
Deadlock condition reported by Kanoj Sarcar <kanoj@netxen.com>. The deadlock occurs when a connection request arrives at the same time that a wildcard listen is being destroyed. A wildcard listen maintains per device listen requests for each RDMA device in the system. The per device listens are automatically added and removed when RDMA devices are inserted or removed from the system. When a wildcard listen is destroyed, rdma_destroy_id() acquires the rdma_cm's device mutex ('lock') to protect against hot-plug events adding or removing per device listens. It then tries to destroy the per device listens by calling ib_destroy_cm_id() or iw_destroy_cm_id(). It does this while holding the device mutex. However, if the underlying iw/ib CM reports a connection request while this is occurring, the rdma_cm callback function will try to acquire the same device mutex. Since we're in a callback, the ib_destroy_cm_id() or iw_destroy_cm_id() calls will block until their callback thread returns, but the callback is blocked waiting for the device mutex. Fix this by re-working how per device listens are destroyed. Use rdma_destroy_id(), which avoids the deadlock, in place of cma_destroy_listen(). Additional synchronization is added to handle device hot-plug events and ensure that the id is not destroyed twice. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-16RDMA/cma: Add locking around QP accessesSean Hefty1-30/+60
If a user allocates a QP on an rdma_cm_id, the rdma_cm will automatically transition the QP through its states (RTR, RTS, error, etc.) While the QP state transitions are occurring, the QP itself must remain valid. Provide locking around the QP pointer to prevent its destruction while accessing the pointer. This fixes an issue reported by Olaf Kirch from Oracle that resulted in a system crash: "An incoming connection arrives and we decide to tear down the nascent connection. The remote ends decides to do the same. We start to shut down the connection, and call rdma_destroy_qp on our cm_id. ... Now apparently a 'connect reject' message comes in from the other host, and cma_ib_handler() is called with an event of IB_CM_REJ_RECEIVED. It calls cma_modify_qp_err, which for some odd reason tries to modify the exact same QP we just destroyed." Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-11Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infinibandLinus Torvalds1-10/+36
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (87 commits) mlx4_core: Fix section mismatches IPoIB: Allow setting policy to ignore multicast groups IB/mthca: Mark error paths as unlikely() in post_srq_recv functions IB/ipath: Minor fix to ordering of freeing and zeroing of tid pages. IB/ipath: Remove redundant link state checks IB/ipath: Fix IB_EVENT_PORT_ERR event IB/ipath: Better handling of unexpected GPIO interrupts IB/ipath: Maintain active time on all chips IB/ipath: Fix QHT7040 serial number check IB/ipath: Indicate a couple of chip bugs to userspace IB/ipath: iba6110 rev4 no longer needs recv header overrun workaround IB/ipath: Use counters in ipath_poll and cleanup interrupts in ipath_close IB/ipath: Remove duplicate copy of LMC IB/ipath: Add ability to set the LMC via the sysfs debugging interface IB/ipath: Optimize completion queue entry insertion and polling IB/ipath: Implement IB_EVENT_QP_LAST_WQE_REACHED IB/ipath: Generate flush CQE when QP is in error state IB/ipath: Remove redundant code IB/ipath: Future proof eeprom checksum code (contents reading) IB/ipath: UC RDMA WRITE with IMMEDIATE doesn't send the immediate ...
2007-10-10[INET]: local port range robustnessStephen Hemminger1-10/+12
Expansion of original idea from Denis V. Lunev <den@openvz.org> Add robustness and locking to the local_port_range sysctl. 1. Enforce that low < high when setting. 2. Use seqlock to ensure atomic update. The locking might seem like overkill, but there are cases where sysadmin might want to change value in the middle of a DoS attack. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-09RDMA/cma: Queue IB CM MRAs to avoid unnecessary remote retriesSean Hefty1-0/+2
Automatically queue MRA message to decrease the number of retries sent by the remote side during connection establishment. This also has the effect of increasing the overall connection timeout without using a longer retry time in the case of dropped packets. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-09RDMA/cma: Add ability to specify type of serviceSean Hefty1-10/+34
Provide support to specify a type of service for a communication identifier. A new function call is used when dealing with IPv4 addresses. For IPv6 addresses, the ToS is specified through the traffic class field in the sockaddr_in6 structure. Signed-off-by: Sean Hefty <sean.hefty@intel.com> [ The comments Eitan Zahavi and myself have made over the v1 post at <http://lists.openfabrics.org/pipermail/general/2007-August/039247.html> were fully addressed. ] Reviewed-by: Or Gerlitz <ogerlitz@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-17RDMA/cma: Remove local write permission from QP access flagsDotan Barak1-1/+1
Local write permission makes no sense as part of the QP access flags, since the access flags only control what the remote end of the connection is allowed to do. Remove the code in the RDMA CM that initializes qp_access_flags with IB_ACCESS_LOCAL_WRITE. Signed-off-by: Dotan Barak <dotanb@mellanox.co.il> Acked-by: Sean Hefty <sean.hefty@intel.com> Acked-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-10IB/cm: Include HCA ACK delay in local ACK timeoutSean Hefty1-1/+0
The IB CM should include the HCA ACK delay when calculating the local ACK timeout value to use for RC QPs. If the HCA ACK delay is large enough relative to the packet life time, then if it is not taken into account, the calculated timeout value ends up being too small, which can result in "retry exceeded" errors. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-06-07RDMA/cma: Fix initialization of next_portSean Hefty1-2/+2
next_port should be between sysctl_local_port_range[0] and [1]. However, it is initially set to a random value with get_random_bytes(). If the value is negative when treated as a signed integer, next_port can end up outside the expected range because of the result of the % operator being negative. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-14RDMA/cma: Add check to validate that cm_id is bound to a deviceSean Hefty1-4/+8
Several checks in the rdma_cm check against the state of the cm_id, but only to validate that the cm_id is bound to an underlying transport specific CM and an RDMA device. Make the check explicit in what we're trying to check for, since we're not synchronizing against the cm_id state. This will allow a user to disconnect a cm_id or reject a connection after receiving a device removal event. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-14RDMA/cma: Fix synchronization with device removal in cma_iw_handlerSean Hefty1-2/+3
The cma_iw_handler needs to validate the state of the rdma_cm_id before processing a new connection request to ensure that a device removal is not already being processed for the same rdma_cm_id. Without the state check, the user can receive simultaneous callbacks for the same cm_id, or a callback after they've destroyed the cm_id. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-14RDMA/cma: Simplify device removal handling codeSean Hefty1-41/+48
Add a new routine and rename another to encapsulate common code for synchronizing with device removal. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-03-06RDMA/cma: Initialize rdma_bind_list in cma_alloc_any_port()Sean Hefty1-1/+1
The struct rdma_bind_list fields for hlist are not being initialized, resulting in a corrupted list. Fix this by using kzalloc() to make sure all pointers are NULL. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-22RDMA/cma: Remove unused node_guid from cma_device structureSean Hefty1-2/+0
Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-22RDMA/cma: Request reversible paths onlySean Hefty1-1/+3
The rdma_cm requires that path records be reversible. Set the reversible bit when issuing an path record query. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-16RDMA/cma: Add multicast communication supportSean Hefty1-44/+315
Extend rdma_cm to support multicast communication. Multicast support is added to the existing RDMA_PS_UDP port space, as well as a new RDMA_PS_IPOIB port space. The latter port space allows joining the multicast groups used by IPoIB, which enables offloading IPoIB traffic to a separate QP. The port space determines the signature used in the MGID when joining the group. The newly added RDMA_PS_IPOIB also allows for unicast operations, similar to RDMA_PS_UDP. Supporting the RDMA_PS_IPOIB requires changing how UD QPs are initialized, since we can no longer assume that the qkey is constant. This requires saving the Q_Key to use when attaching to a device, so that it is available when creating the QP. The Q_Key information is exported to the user through the existing rdma_init_qp_attr() interface. Multicast support is also exported to userspace through the rdma_ucm. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-10IB: Remove redundant "_wq" from workqueue namesSean Hefty1-1/+1
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-10RDMA/cma: Increment port number after close to avoid re-useSean Hefty1-10/+56
Randomize the starting port number and avoid re-using port values immediately after they are closed. Instead keep track of the last port value used and increment it every time a new port number is assigned, to better replicate other port spaces. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-01-07RDMA/iwcm: iWARP connection timeouts shouldn't be reported as rejectsSteve Wise1-3/+14
The iWARP CM should report timeouts as event RDMA_CM_EVENT_UNREACHABLE, not event RDMA_CM_EVENT_REJECTED. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-12-12RDMA/cma: Add support for RDMA_PS_UDPSean Hefty1-16/+204
Allow the use of UD QPs through the rdma_cm, in order to provide address translation services for resolving IB addresses for datagram messages using SIDR. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-12-12RDMA/cma: Allow early transition to RTS to handle lost CM messagesSean Hefty1-24/+44
During connection establishment, the passive side of a connection can receive messages from the active side before the connection event has been delivered to the user. Allow the passive side to send messages in response to received data before the event is delivered. To handle the case where the connection messages are lost, a new rdma_notify() function is added that users may invoke to force a connection into the established state. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-12-12RDMA/cma: Report connect info with connect eventsSean Hefty1-57/+85
Connection information was never given to the recipient of a connection request or reply message. Only the event was delivered. Report the connection data with the event to allows user to reject the connection based on the requested parameters, or adjust their resources to match the request. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-12-12RDMA/cma: Remove unneeded qp_type parameter from rdma_cmSean Hefty1-5/+1
The qp_type parameter into the rdma_cm is unneeded, and can be misleading. The QP type should be determined from the port space. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-12-05Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6David Howells1-28/+21
Conflicts: drivers/infiniband/core/iwcm.c drivers/net/chelsio/cxgb2.c drivers/net/wireless/bcm43xx/bcm43xx_main.c drivers/net/wireless/prism54/islpci_eth.c drivers/usb/core/hub.h drivers/usb/input/hid-core.c net/core/netpoll.c Fix up merge failures with Linus's head and fix new compilation failures. Signed-Off-By: David Howells <dhowells@redhat.com>
2006-11-29RDMA/cm: Remove setting local write as part of QP access flagsDotan Barak1-1/+1
The qp_access_flags are for remote access permissions only, so IB_ACCESS_LOCAL_WRITE is an invalid value. Remove it from the values set by cm_init_qp_init_attr() and cma_init_ib_qp(). Signed-off-by: Dotan Barak <dotanb@mellanox.co.il> Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-11-29RDMA/cma: Rewrite cma_req_handler() to encapsulate common codeKrishna Kumar1-14/+13
Rewrite cma_req_handler error handling case to encapsulate common code. Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com> Acked-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-11-29RDMA/cma: Remove redundant check in cma_add_oneKrishna Kumar1-5/+0
Remove redundant check of node_guid in cma_add_one(). Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com> Acked-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-11-29RDMA/cma: Optimize cma_bind_loopback() to check for empty listKrishna Kumar1-8/+7
Optimize to test for an empty list first. This ends up simplifying the code too. Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com> Acked-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-11-22WorkStruct: make allyesconfigDavid Howells1-5/+5
Fix up for make allyesconfig. Signed-Off-By: David Howells <dhowells@redhat.com>
2006-11-02RDMA/addr: Use client registration to fix module unload raceSean Hefty1-2/+6
Require registration with ib_addr module to prevent caller from unloading while a callback is in progress. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-10-30RDMA/cma: rdma_bind_addr() leaks a cma_dev reference countKrishna Kumar1-8/+15
rdma_bind_addr() leaks a cma_dev reference count in failure case. Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com> Signed-off-by: Sean Hefty <sean.hefty@intel.com>
2006-10-02RDMA/cma: Optimize error handlingKrishna Kumar1-10/+14
Reorganize code relating to cma_get_net_info() and rdam_create_id() to optimize error case handling (no need to alloc memory/etc. as part of rdma_create_id() if input parameters are wrong). Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com> Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-10-02RDMA/cma: Eliminate unnecessary remove_listKrishna Kumar1-5/+1
Eliminate remove_list by using list_del_init() instead during device removal handling. Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com> Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-10-02RDMA/cma: Set status correctly on route resolution errorSean Hefty1-0/+1
On reporting a route error, also include the status for the error, rather than indicating a status of 0 when an error has occurred. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-10-02RDMA/cma: Fix device removal raceKrishna Kumar1-0/+1
The race is as follows: A process : cma_process_remove() calls cma_remove_id_dev(), which sets id state to CMA_DEVICE_REMOVAL and calls wait_event(dev_remove). B process : cma_req_handler() had incremented dev_remove, and calls cma_acquire_ib_dev() and on failure calls cma_release_remove(), which does a wake_up of cma_process_remove(). Then cma_req_handler() calls rdma_destroy_id(); A Process : cma_remove_id_dev() gets woken and checks the state of id, and since it is still (wrongly) CMA_DEVICE_REMOVAL, it calls notify_user(id) and if that fails, the caller - cma_process_remove() calls rdma_destroy_id(id). Two processes can call rdma_destroy_id(), resulting in one de-referencing kfreed id_priv. Fix is for process B to set CMA_DESTROYING in cma_req_handler() so that process A will return instead of doing a rdma_destroy_id(). Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com> Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-10-02RDMA/cma: Fix leak of cm_ids in case of failuresKrishna Kumar1-4/+11
cma_connect_ib() and cma_connect_iw() leak cm_id's in failure cases. Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com> Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22IB/sa: Require SA registrationMichael S. Tsirkin1-1/+6
Require users to register with SA module, to prevent the sa_query module text from going away while an SA query callback is still running. Update all in-tree users for the new interface. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22RDMA/cma: Protect against adding device during destructionSean Hefty1-8/+26
Closes a window where address resolution can attach an rdma_cm_id to a device during destruction of the rdma_cm_id. This can result in the rdma_cm_id remaining in the device list after its memory has been freed. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22RDMA: iWARP Core Changes.Tom Tucker1-41/+315
Modifications to the existing rdma header files, core files, drivers, and ulp files to support iWARP, including: - Hook iWARP CM into the build system and use it in rdma_cm. - Convert enum ib_node_type to enum rdma_node_type, which includes the possibility of RDMA_NODE_RNIC, and update everything for this. Signed-off-by: Tom Tucker <tom@opengridcomputing.com> Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22IB: Whitespace fixesRoland Dreier1-4/+4
Remove some trailing whitespace that has snuck in despite the best efforts of whitespace=error-all. Also fix a few other whitespace bogosities. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-14RDMA/cma: Increase the IB CM retry count in CMAMichael S. Tsirkin1-1/+1
3 seems like a low number of IB Communication Manager retries to set; we see connections failing under stress, and in any case 3 just looks like an arbitrary number. 15 is the max value allowed by the InfiniBand spec. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Acked-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-07-14[PATCH] IB/cm: set private data length for reject messagesIra Weiny1-0/+1
Set private data length for reject messages to the correct size. Fix from openib svn r8483. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-14[PATCH] IB/addr: gid structure alignment fixMichael S. Tsirkin1-10/+11
The device address contains unsigned character arrays, which contain raw GID addresses. The GIDs may not be naturally aligned, so do not cast them to structures or unions. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26[PATCH] Array overrun in drivers/infiniband/core/cma.cEric Sesterhenn1-1/+1
This was spotted by coverity #id 1300. Since the array has only four elements, we should just use those four. Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de> Acked-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.