aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/infiniband/core (follow)
AgeCommit message (Collapse)AuthorFilesLines
2015-08-30IB/cma: Share ib_cm_ids between rdma_cm_idsHaggai Eran1-55/+4
Use ib_cm_insert_listen to create listening IB CM IDs or share existing ones if needed. When given a request on a specific CM ID, the code now matches the request to the RDMA CM ID based on the request parameters, so it no longer needs to rely on the ib_cm's private data matching capabilities. Signed-off-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-08-30IB/cma: Use found net_dev for passive connectionsHaggai Eran1-27/+49
When receiving a new connection in cma_req_handler, we actually already know the net_dev that is used for the connection's creation. Instead of calling cma_translate_addr to resolve the new connection id's source address, just use the net_dev that was found. Signed-off-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-08-30IB/cma: Validate routing of incoming requestsHaggai Eran1-3/+92
Pass incoming request parameters through the relevant IPv4/IPv6 routing tables and make sure the network stack is configured to handle such requests. Signed-off-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-08-30IB/cma: Add net_dev and private data checks to RDMA CMHaggai Eran1-3/+185
Instead of relying on a the ib_cm module to check an incoming CM request's private data header, add these checks to the RDMA CM module. This allows a following patch to to clean up the ib_cm interface and remove the code that looks into the private headers. It will also allow supporting namespaces in RDMA CM by making these checks namespace aware later on. Signed-off-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-08-30IB/cm: Expose BTH P_Key in CM and SIDR request eventsHaggai Eran1-0/+20
The rdma_cm module will later use the P_Key from the BTH to de-mux requests. See discussion at: http://www.spinics.net/lists/netdev/msg336067.html Cc: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Cc: Liran Liss <liranl@mellanox.com> Signed-off-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-08-30IB/cma: Helper functions to access port space IDRsHaggai Eran1-21/+60
Add helper functions to access the IDRs by port-space and port number. Pass around the port-space enum in cma.c instead of using pointers to port-space IDRs. Signed-off-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Yotam Kenneth <yotamke@mellanox.com> Signed-off-by: Shachar Raindel <raindel@mellanox.com> Signed-off-by: Guy Shapiro <guysh@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-08-30IB/cma: Refactor RDMA IP CM private-data parsing codeHaggai Eran1-65/+105
When receiving a connection request, rdma_cm needs to associate the request with a network device, in order to disambiguate requests. To do this, it needs to know the request's destination IP. For this the module needs to allow getting this information from the private data in the request packet, instead of relying on the information already being in the listening RDMA CM ID. When creating a new incoming connection ID, the code in cma_save_ip{4,6}_info can no longer rely on the listener's private data to find the port number, so it reads it from the requested service ID. Signed-off-by: Guy Shapiro <guysh@mellanox.com> Signed-off-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Yotam Kenneth <yotamke@mellanox.com> Signed-off-by: Shachar Raindel <raindel@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-08-30IB/cm: Share listening CM IDsHaggai Eran1-6/+116
Enabling network namespaces for RDMA CM will allow processes on different namespaces to listen on the same port. In order to leave namespace support out of the CM layer, this requires that multiple RDMA CM IDs will be able to share a single CM ID. This patch adds infrastructure to retrieve an existing listening ib_cm_id, based on its device and service ID, or create a new one if one does not already exist. It also adds a reference count for such instances (cm_id_private.listen_sharecount), and prevents cm_destroy_id from destroying a CM if it is still shared. See the relevant discussion [1]. [1] Re: [PATCH v3 for-next 05/13] IB/cm: Reference count ib_cm_ids http://www.spinics.net/lists/netdev/msg328860.html Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-08-30IB/cm: Expose service ID in request eventsHaggai Eran1-0/+3
Expose the service ID on an incoming CM or SIDR request to the event handler. This will allow the RDMA CM module to de-multiplex connection requests based on the information encoded in the service ID. Acked-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-08-30IB/core: Find the network device matching connection parametersYotam Kenneth1-0/+46
In the case of IPoIB, and maybe in other cases, the network device is managed by an upper-layer protocol (ULP). In order to expose this network device to other users of the IB device, let ULPs implement a callback that returns network device according to connection parameters. The IB device and port, together with the P_Key and the GID should be enough to uniquely identify the ULP net device. However, in current kernels there can be multiple IPoIB interfaces created with the same GID. Furthermore, such configuration may be desireable to support ipvlan-like configurations for RDMA CM with IPoIB. To resolve the device in these cases the code will also take the IP address as an additional input. Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Yotam Kenneth <yotamke@mellanox.com> Signed-off-by: Shachar Raindel <raindel@mellanox.com> Signed-off-by: Guy Shapiro <guysh@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-08-30IB/core: lock client data with lists_rwsemHaggai Eran10-35/+67
An ib_client callback that is called with the lists_rwsem locked only for read is protected from changes to the IB client lists, but not from ib_unregister_device() freeing its client data. This is because ib_unregister_device() will remove the device from the device list with lists_rwsem locked for write, but perform the rest of the cleanup, including the call to remove() without that lock. Mark client data that is undergoing de-registration with a new going_down flag in the client data context. Lock the client data list with lists_rwsem for write in addition to using the spinlock, so that functions calling the callback would be able to lock only lists_rwsem for read and let callbacks sleep. Since ib_unregister_client() now marks the client data context, no need for remove() to search the context again, so pass the client data directly to remove() callbacks. Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-08-30IB/core: Add rwsem to allow reading device list or client listHaggai Eran1-12/+28
Currently the RDMA subsystem's device list and client list are protected by a single mutex. This prevents adding user-facing APIs that iterate these lists, since using them may cause a deadlock. The patch attempts to solve this problem by adding a read-write semaphore to protect the lists. Readers now don't need the mutex, and are safe just by read-locking the semaphore. The ib_register_device, ib_register_client, ib_unregister_device, and ib_unregister_client functions are modified to lock the semaphore for write during their respective list modification. Also, in order to make sure client callbacks are called only between add() and remove() calls, the code is changed to only add items to the lists after the add() calls and remove from the lists before the remove() calls. This patch attempts to solve a similar need [1] that was seen in the RoCE v2 patch series. [1] http://www.spinics.net/lists/linux-rdma/msg24733.html Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Cc: Matan Barak <matanb@mellanox.com> Signed-off-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-08-28RDMA/cma: fix IPv6 address resolutionSpencer Baugh1-2/+5
Resolving a link-local IPv6 address with an unspecified source address was broken by commit 5462eddd7a, which prevented the IPv6 stack from learning the scope id of the link-local IPv6 address, causing random failures as the IP stack chose a random link to resolve the address on. This commit 5462eddd7a made us bail out of cma_check_linklocal early if the address passed in was not an IPv6 link-local address. On the address resolution path, the address passed in is the source address; if the source address is the unspecified address, which is not link-local, we will bail out early. This is mostly correct, but if the destination address is a link-local address, then we will be following a link-local route, and we'll need to tell the IPv6 stack what the scope id of the destination address is. This used to be done by last line of cma_check_linklocal, which is skipped when bailing out early: dev_addr->bound_dev_if = sin6->sin6_scope_id; (In cma_bind_addr, the sin6_scope_id of the source address is set to the sin6_scope_id of the destination address, so this is correct) This line is required in turn for the following line, L279 of addr6_resolve, to actually inform the IPv6 stack of the scope id: fl6.flowi6_oif = addr->bound_dev_if; Since we can only know we are in this failure case when we have access to both the source IPv6 address and destination IPv6 address, we have to deal with this further up the stack. So detect this failure case in cma_bind_addr, and set bound_dev_if to the destination address scope id to correct it. Signed-off-by: Spencer Baugh <sbaugh@catern.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-08-28IB/ucma: Fix theoretical user triggered use-after-freeJason Gunthorpe1-3/+3
Something like this: CPU A CPU B Acked-by: Sean Hefty <sean.hefty@intel.com> ======================== ================================ ucma_destroy_id() wait_for_completion() .. anything ucma_put_ctx() complete() .. continues ... ucma_leave_multicast() mutex_lock(mut) atomic_inc(ctx->ref) mutex_unlock(mut) ucma_free_ctx() ucma_cleanup_multicast() mutex_lock(mut) kfree(mc) rdma_leave_multicast(mc->ctx->cm_id,.. Fix it by latching the ref at 0. Once it goes to 0 mc and ctx cannot leave the mutex(mut) protection. The other atomic_inc in ucma_get_ctx is OK because mutex(mut) protects it from racing with ucma_destroy_id. Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Acked-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-14IB/core: Destroy multcast_idr on module exitJohannes Thumshirn1-0/+1
Destroy multcast_idr on module exit, reclaiming the allocated memory. This was detected by the following semantic patch (written by Luis Rodriguez <mcgrof@suse.com>) <SmPL> @ defines_module_init @ declarer name module_init, module_exit; declarer name DEFINE_IDR; identifier init; @@ module_init(init); @ defines_module_exit @ identifier exit; @@ module_exit(exit); @ declares_idr depends on defines_module_init && defines_module_exit @ identifier idr; @@ DEFINE_IDR(idr); @ on_exit_calls_destroy depends on declares_idr && defines_module_exit @ identifier declares_idr.idr, defines_module_exit.exit; @@ exit(void) { ... idr_destroy(&idr); ... } @ missing_module_idr_destroy depends on declares_idr && defines_module_exit && !on_exit_calls_destroy @ identifier declares_idr.idr, defines_module_exit.exit; @@ exit(void) { ... +idr_destroy(&idr); } </SmPL> Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-14IB/ucm: Fix bitmap wrap when devnum > IB_UCM_MAX_DEVICESCarol L Soto1-2/+2
ib_ucm_release_dev clears the wrong bit if devnum is greater than IB_UCM_MAX_DEVICES. Signed-off-by: Carol L Soto <clsoto@linux.vnet.ibm.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-14IB/ucma: Fix lockdep warning in ucma_lock_filesHaggai Eran1-2/+2
The ucma_lock_files() locks the mut mutex on two files, e.g. for migrating an ID. Use mutex_lock_nested() to prevent the warning below. ============================================= [ INFO: possible recursive locking detected ] 4.1.0-rc6-hmm+ #40 Tainted: G O --------------------------------------------- pingpong_rpc_se/10260 is trying to acquire lock: (&file->mut){+.+.+.}, at: [<ffffffffa047ac55>] ucma_migrate_id+0xc5/0x248 [rdma_ucm] but task is already holding lock: (&file->mut){+.+.+.}, at: [<ffffffffa047ac4b>] ucma_migrate_id+0xbb/0x248 [rdma_ucm] other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&file->mut); lock(&file->mut); *** DEADLOCK *** May be due to missing lock nesting notation 1 lock held by pingpong_rpc_se/10260: #0: (&file->mut){+.+.+.}, at: [<ffffffffa047ac4b>] ucma_migrate_id+0xbb/0x248 [rdma_ucm] stack backtrace: CPU: 0 PID: 10260 Comm: pingpong_rpc_se Tainted: G O 4.1.0-rc6-hmm+ #40 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2007 ffff8801f85b63d0 ffff880195677b58 ffffffff81668f49 0000000000000001 ffffffff825cbbe0 ffff880195677c38 ffffffff810bb991 ffff880100000000 ffff880100000000 ffff880100000001 ffff8801f85b7010 ffffffff8121bee9 Call Trace: [<ffffffff81668f49>] dump_stack+0x4f/0x6e [<ffffffff810bb991>] __lock_acquire+0x741/0x1820 [<ffffffff8121bee9>] ? dput+0x29/0x320 [<ffffffff810bcb38>] lock_acquire+0xc8/0x240 [<ffffffffa047ac55>] ? ucma_migrate_id+0xc5/0x248 [rdma_ucm] [<ffffffff8166b901>] ? mutex_lock_nested+0x291/0x3e0 [<ffffffff8166b6d5>] mutex_lock_nested+0x65/0x3e0 [<ffffffffa047ac55>] ? ucma_migrate_id+0xc5/0x248 [rdma_ucm] [<ffffffff810baeed>] ? trace_hardirqs_on+0xd/0x10 [<ffffffff8166b66e>] ? mutex_unlock+0xe/0x10 [<ffffffffa047ac55>] ucma_migrate_id+0xc5/0x248 [rdma_ucm] [<ffffffffa0478474>] ucma_write+0xa4/0xb0 [rdma_ucm] [<ffffffff81200674>] __vfs_write+0x34/0x100 [<ffffffff8112427c>] ? __audit_syscall_entry+0xac/0x110 [<ffffffff810ec055>] ? current_kernel_time+0xc5/0xe0 [<ffffffff812aa4d3>] ? security_file_permission+0x23/0x90 [<ffffffff8120088d>] ? rw_verify_area+0x5d/0xe0 [<ffffffff812009bb>] vfs_write+0xab/0x120 [<ffffffff81201519>] SyS_write+0x59/0xd0 [<ffffffff8112427c>] ? __audit_syscall_entry+0xac/0x110 [<ffffffff8166ffee>] system_call_fastpath+0x12/0x76 Signed-off-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-14RDMA/core: Fixes for port mapper client registrationTatyana Nikolova3-25/+48
Fixes to allow clients to make remove mapping requests, after they have provided the user space service with the mapping information, they are using when the service is restarted. 1) Adding IWPM_REG_VALID, IWPM_REG_INCOMPL and IWPM_REG_UNDEF registration types for the port mapper clients and functions to set/check the registration type. 2) If the port mapper user space service is not available to register the client, then its registration stays IWPM_REG_UNDEF and the registration isn't checked until the service becomes available (no mappings are possible, if the user space service isn't running). 3) After the service is restarted, the user space port mapper pid is set to valid and the client registration is set to IWPM_REG_INCOMPL to allow the client to make remove mapping requests. Signed-off-by: Tatyana Nikolova <Tatyana.E.Nikolova@intel.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Tested-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-14IB/cm: Do not queue work to a device that's going awayErez Shitrit1-6/+55
Whenever ib_cm gets remove_one call, like when there is a hot-unplug event, the driver should mark itself as going_down and confirm that no new works are going to be queued for that device. so, the order of the actions are: 1. mark the going_down bit. 2. flush the wq. 3. [make sure no new works for that device.] 4. unregister mad agent. otherwise, works that are already queued can be scheduled after the mad agent was freed. Signed-off-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-14IB/mad: Fix compare between big endian and cpu endianIra Weiny1-1/+1
The define OPA_LID_PERMISSIVE is big endian and was compared to the cpu endian variable opa_drslid. Problem caught by 0-day build infrastructure. Fixes: 8e4349d13f33 (IB/mad: Add final OPA MAD processing) Signed-off-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: John, Jubin <jubin.john@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-14IB: Add rdma_cap_ib_switch helper and use where appropriateHal Rosenstock8-67/+45
Persuant to Liran's comments on node_type on linux-rdma mailing list: In an effort to reform the RDMA core and ULPs to minimize use of node_type in struct ib_device, an additional bit is added to struct ib_device for is_switch (IB switch). This is needed to be initialized by any IB switch device driver. This is a NEW requirement on such device drivers which are all "out of tree". In addition, an ib_switch helper was added to ib_verbs.h based on the is_switch device bit rather than node_type (although those should be consistent). The RDMA core (MAD, SMI, agent, sa_query, multicast, sysfs) as well as (IPoIB and SRP) ULPs are updated where appropriate to use this new helper. In some cases, the helper is now used under the covers of using rdma_[start end]_port rather than the open coding previously used. Reviewed-by: Sean Hefty <sean.hefty@intel.com> Reviewed-By: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Tested-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Hal Rosenstock <hal@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-06-23Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdmaLinus Torvalds22-681/+1243
Pull rdma updates from Doug Ledford: - a large cleanup of how device capabilities are checked for various features - additional cleanups in the MAD processing - update to the srp driver - creation and use of centralized log message helpers - add const to a number of args to calls and clean up call chain - add support for extended cq create verb - add support for timestamps on cq completion - add support for processing OPA MAD packets * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (92 commits) IB/mad: Add final OPA MAD processing IB/mad: Add partial Intel OPA MAD support IB/mad: Add partial Intel OPA MAD support IB/core: Add OPA MAD core capability flag IB/mad: Add support for additional MAD info to/from drivers IB/mad: Convert allocations from kmem_cache to kzalloc IB/core: Add ability for drivers to report an alternate MAD size. IB/mad: Support alternate Base Versions when creating MADs IB/mad: Create a generic helper for DR forwarding checks IB/mad: Create a generic helper for DR SMP Recv processing IB/mad: Create a generic helper for DR SMP Send processing IB/mad: Split IB SMI handling from MAD Recv handler IB/mad cleanup: Generalize processing of MAD data IB/mad cleanup: Clean up function params -- find_mad_agent IB/mlx4: Add support for CQ time-stamping IB/mlx4: Add mmap call to map the hardware clock IB/core: Pass hardware specific data in query_device IB/core: Add timestamp_mask and hca_core_clock to query_device IB/core: Extend ib_uverbs_create_cq IB/core: Add CQ creation time-stamping flag ...
2015-06-12IB/mad: Add final OPA MAD processingIra Weiny6-43/+230
For devices which support OPA MADs 1) Use previously defined SMP support functions. 2) Pass correct base version to ib_create_send_mad when processing OPA MADs. 3) Process out_mad_key_index returned by agents for a response. This is necessary because OPA SMP packets must carry a valid pkey. 4) Carry the correct segment size (OPA vs IBTA) of RMPP messages within ib_mad_recv_wc. 5) Handle variable length OPA MADs by: * Adjusting the 'fake' WC for locally routed SMP's to represent the proper incoming byte_len * out_mad_size is used from the local HCA agents 1) when sending agent responses on the wire 2) when passing responses through the local_completions function NOTE: wc.byte_len includes the GRH length and therefore is different from the in_mad_size specified to the local HCA agents. out_mad_size should _not_ include the GRH length as it is added Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-06-12IB/mad: Add partial Intel OPA MAD supportIra Weiny3-0/+133
Add OPA SMP processing functionality. Define the new OPA SMP format, create support functions for this format using the previously defined helper functions as appropriate. These functions are defined in this patch and used in the final OPA MAD support patch. Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-06-12IB/mad: Add partial Intel OPA MAD supportIra Weiny3-14/+37
This patch is the first of 3 which adds processing of OPA MADs 1) Add Intel Omni-Path Architecture defines 2) Increase max management version to accommodate OPA 3) update ib_create_send_mad If the device supports OPA MADs and the MAD being sent is the OPA base version alter the MAD size and sg lengths as appropriate Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-06-12IB/mad: Add support for additional MAD info to/from driversIra Weiny2-6/+18
In order to support alternate sized MADs (and variable sized MADs on OPA devices) add in/out MAD size parameters to the process_mad core call. In addition, add an out_mad_pkey_index to communicate the pkey index the driver wishes the MAD stack to use when sending OPA MAD responses. The out MAD size and the out MAD PKey index are required by the MAD stack to generate responses on OPA devices. Furthermore, the in and out MAD parameters are made generic by specifying them as ib_mad_hdr rather than ib_mad. Drivers are modified as needed and are protected by BUG_ON flags if the MAD sizes passed to them is incorrect. Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-06-12IB/mad: Convert allocations from kmem_cache to kzallocIra Weiny4-92/+97
This patch implements allocating alternate receive MAD buffers within the MAD stack. Support for OPA to send/recv variable sized MADs is implemented later. 1) Convert MAD allocations from kmem_cache to kzalloc kzalloc is more flexible to support devices with different sized MADs and research and testing showed that the current use of kmem_cache does not provide performance benefits over kzalloc. 2) Change struct ib_mad_private to use a flex array for the mad data 3) Allocate ib_mad_private based on the size specified by devices in rdma_max_mad_size. 4) Carry the allocated size in ib_mad_private to be used when processing ib_mad_private objects. 5) Alter DMA mappings based on the mad_size of ib_mad_private. 6) Replace the use of sizeof and static defines as appropriate 7) Add appropriate casts for the MAD data when calling processing functions. Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-06-12IB/core: Add ability for drivers to report an alternate MAD size.Ira Weiny2-0/+14
Add max MAD size to the device immutable data set and have all drivers that support MADs report the current IB MAD size (IB_MGMT_MAD_SIZE) to the core. Verify MAD size data in both the MAD core and when reading the immutable data. OPA drivers will report alternate MAD sizes in subsequent patches. Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-06-12IB/mad: Support alternate Base Versions when creating MADsIra Weiny6-8/+16
In preparation to support the new OPA MAD Base version, add a base version parameter to ib_create_send_mad and set it to IB_MGMT_BASE_VERSION for current users. Definition of the new base version and it's processing will occur in later patches. Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-06-12IB/mad: Create a generic helper for DR forwarding checksIra Weiny1-9/+16
IB and OPA SMPs share the same processing algorithm but have different header formats and permissive LID detection. Add a helper function which is generic to processing the DR forwarding checks which can be used by both IB and OPA SMP code. Use this function in the current IB function smi_check_forward_dr_smp. Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-06-12IB/mad: Create a generic helper for DR SMP Recv processingIra Weiny1-33/+46
IB and OPA SMPs share the same processing algorithm but have different header formats and permissive LID detection. Add a helper function which is generic to processing DR SMP Recv messages which can be used by both IB and OPA SMP code. Use this function in the current IB function smi_handle_dr_smp_recv. Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-06-12IB/mad: Create a generic helper for DR SMP Send processingIra Weiny1-34/+46
IB and OPA SMPs share the same processing algorithm but have different header formats and permissive LID detection. Add a helper function which is generic to processing DR SMP Send messages which can be used by both IB and OPA SMP code. Use this function in the current IB function smi_handle_dr_smp_send. Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-06-12IB/mad: Split IB SMI handling from MAD Recv handlerIra Weiny1-36/+49
Make a helper function to process Directed Route SMPs to be called by the IB MAD Recv Handler, ib_mad_recv_done_handler. This cleans up the MAD receive handler code a bit and allows for us to better share the SMP processing code between IB and OPA SMPs. IB and OPA SMPs share the same processing algorithm but have different header formats and permissive LID detection. Therefore this and subsequent patches split the common processing code from the IB specific code in anticipation of sharing those algorithms with the OPA code. Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-06-12IB/mad cleanup: Generalize processing of MAD dataIra Weiny1-6/+6
ib_find_send_mad only needs access to the MAD header not the full IB MAD. Change the local variable to ib_mad_hdr and change the corresponding cast. This allows for clean usage of this function with both IB and OPA MADs because OPA MADs carry the same header as IB MADs. Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-06-12IB/mad cleanup: Clean up function params -- find_mad_agentIra Weiny1-18/+18
find_mad_agent only needs read only access to the MAD header. Update the ib_mad pointer to be const ib_mad_hdr. Adjust call tree. Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-06-12IB/core: Pass hardware specific data in query_deviceMatan Barak2-2/+4
Vendors should be able to pass vendor specific data to/from user-space via query_device uverb. In order to do this, we need to pass the vendors' specific udata. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-06-12IB/core: Add timestamp_mask and hca_core_clock to query_deviceMatan Barak2-0/+16
In order to expose timestamp we need to expose two new attributes in query_device to be used for CQ completion time-stamping: timestamp_mask - how many bits are valid in the timestamp, where timestamp values could be 64bits the most. hca_core_clock - timestamp is given in HW cycles, the frequency in KHZ units of the HCA, necessary in order to convert cycles to seconds. This is added both to ib_query_device and its respective uverbs counterpart. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-06-12IB/core: Extend ib_uverbs_create_cqMatan Barak3-35/+137
ib_uverbs_ex_create_cq follows the extension verbs mechanism. New features (for example, CQ creation flags field which is added in a downstream patch) could used via user-space libraries without breaking the ABI. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-06-12IB/core: Change ib_create_cq to use struct ib_cq_init_attrMatan Barak2-4/+6
Currently, ib_create_cq uses cqe and comp_vecotr instead of the extendible ib_cq_init_attr struct. Earlier patches already changed the vendors to work with ib_cq_init_attr. This patch changes the consumers too. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-06-12IB/core: Change provider's API of create_cq to be extendibleMatan Barak2-3/+6
Add a new ib_cq_init_attr structure which contains the previous cqe (minimum number of CQ entries) and comp_vector (completion vector) in addition to a new flags field. All vendors' create_cq callbacks are changed in order to work with the new API. This commit does not change any functionality. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-By: Devesh Sharma <devesh.sharma@avagotech.com> to patch #2 Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-06-10IB/core: Don't warn on no SA support in event handlerMoni Shoua2-2/+2
Registering an event handler is done for a device. This device may have one RoCE port (no SA cap) and one InfiniBand port (has SA cap). Therefore, warning from the event handler about a specific port that doesn't have SA cap is correct but pollutes the kernel log without a need. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-06-02Merge branch 'for-4.2-misc' into k.o/for-4.2Doug Ledford1-0/+2
2015-06-02IB/core cleanup: Add const to args - agent_send_responseIra Weiny5-16/+17
In order to support constant callers of agent_send_response we add const specifiers to the its pointer arguments. Adjust the call tree accordingly. Signed-off-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Hal Rosenstock <hal@mellanox.com> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-06-02RDMA/iw_cm: Export tos field to iwarp providersSteve Wise1-0/+2
rdma-cma/iw_cm: Export tos field to iwarp providers Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Tatyana Nikolova <Tatyana.E.Nikolova@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-05-20IB/cma: Fix broken AF_IB UD supportMatthew Finlay1-11/+21
Support for using UD and AF_IB is currently broken. The IB_CM_SIDR_REQ_RECEIVED message is not handled properly in cma_save_net_info() and we end up falling into code that will try and process the request as ipv4/ipv6, which will end up failing. The resolution is to add a check for the SIDR_REQ and call cma_save_ib_info() with a NULL path record. Change cma_save_ib_info() to copy the src sib info from the listen_id when the path record is NULL. Reported-by: Hari Shankar <Hari.Shankar@netapp.com> Signed-off-by: Matt Finlay <matt@mellanox.com> Acked-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-05-20Merge branches 'bart-srp', 'generic-errors', 'ira-cleanups' and 'mwang-v8' into k.o/for-4.2Doug Ledford15-369/+376
2015-05-20IB/core: Change rdma_protocol_iboe to roceIra Weiny2-7/+7
After discussion upstream, it was agreed to transition the usage of iboe in the kernel to roce. This keeps our terminology consistent with what was finalized in the IBTA Annex 16 and IBTA Annex 17 publications. Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-05-20ib/cm: Change reject message type when destroying cm_idTed Kim1-1/+1
Problem reported by: Ted Kim <ted.h.kim@oracle.com>: We have a case where a Linux system and a non-Linux system are trying to interoperate. The Linux host is the active side and starts the connection establishment, but later decides to not go through with the connection setup and does rdma_destroy_id(). The rdma_destroy_id() eventually works its way down to cm_destroy_id() in core/cm.c, where a REJ is sent. The non-Linux system has some trouble recognizing the REJ because of: A. CM states which can't receive the REJ B. Some issues about REJ formatting (missing comm ID) ISSUE A: That part of the spec says, a Consumer Reject REJ can be sent for a connection abort, but it goes further and says: can send a REJ message with a "Consumer Reject" Reason code if they are in a CM state (i.e. REP Rcvd, MRA(REP) Sent, REQ Rcvd, MRA Sent) that allows a REJ to be sent (lines 35-38). Of the states listed there in that sentence, it would seem to limit the active side to using the Consumer Reject (for the abort case) in just the REP-Rcvd and MRA-REP-Sent states. That is basically only after the active side sees a REP (or alternatively goes down the state transitions to timeout in which case a Timeout REJ is sent). As a fix, in cm-destroy-id() move the IB-CM-MRA-REQ-RCVD case to the same as REQ-SENT. Essentially, make a REJ sent after getting an MRA on active side a timeout rather than Consumer- Reject, which is arguably more correct with the CM state diagrams previous to getting a REP. Signed-off-by: Ted Kim <ted.h.kim@oracle.com> Signed-off-by: Sean Hefty <sean.hefty@intel.com>
2015-05-20IB/core: Convert core to use bitfield for capsIra Weiny1-1/+0
Remove query_protocol callback Use the new Core Capability bits for: rdma_protocol_* rdma_cap_ib_mad rdma_cap_ib_smi rdma_cap_ib_cm rdma_cap_iw_cm rdma_cap_ib_sa rdma_cap_ib_mcast rdma_cap_af_ib rdma_cap_eth_ah Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-05-20IB/core: Add per port immutable struct to ib_deviceIra Weiny2-35/+29
As of commit 5eb620c81ce3 "IB/core: Add helpers for uncached GID and P_Key searches"; pkey_tbl_len and gid_tbl_len are immutable data which are stored in the ib_device. The per port core capability flags to be added later are also immutable data to be stored in the ib_device object. In preparation for this create a structure for per port immutable data and place the pkey and gid table lengths within this structure. "get_port_immutable" is added as a mandatory device function to allow the drivers to fill in this data. Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.