aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/infiniband/hw/bnxt_re/roce_hsi.h (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-02-07RDMA/bnxt_re: Add extended psn structure for 57500 adaptersDevesh Sharma1-1/+18
The new 57500 series of adapter has bigger psn search structure. The size of new structure is 16B. Changing the control path memory allocation and fast path code to accommodate the new psn structure while maintaining the backward compatibility. There are few additional changes listed below: - For 57500 chip max-sge are limited to 6 for now. - For 57500 chip max-receive-sge should be set to 6 for now. - Add driver/hardware interface structure for new chip. Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-07RDMA/bnxt_re: Enable GSI QP support for 57500 seriesDevesh Sharma1-15/+30
In the new 57500 series of adapters the GSI qp is a UD type QP unlike the previous generation where it was a Raw Eth QP. Changing the control and data path to support the same. Listing all the significant diffs: - AH creation resolve network type unconditionally - Add check at relevant places to distinguish from Raw Eth processing flow. - bnxt_re_process_res_ud_wc report completion with GRH flag when qp is GSI. - Change length, cfa_meta and smac to match new driver/hardware interface. - Add new driver/hardware interface. Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-07RDMA/bnxt_re: Add 64bit doorbells for 57500 seriesDevesh Sharma1-42/+54
The new chip series has 64 bit doorbell for notification queues. Thus, both control and data path event queues need new routines to write 64 bit doorbell. Adding the same. There is new doorbell interface between the chip and driver. Changing the chip specific data structure definitions. Additional significant changes are listed below - bnxt_re_net_ring_free/alloc takes a new argument - bnxt_qplib_enable_nq and enable_rcfw uses new doorbell offset for new chip. - DB mapping for NQ and CREQ now maps 8 bytes. - DBR_DBR_* macros renames to DBC_DBC_* - store nq_db_offset in a 32bit data type. - got rid of __iowrite64_copy, used writeq instead. - changed the DB header initialization to simpler scheme. Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-10-16RDMA/bnxt_re: Report out of sequence hw countersSelvin Xavier1-0/+5
Expose out of sequence errors received from FW. This counter is a 32 bit counter and driver has to accumulate the counter. Stores the previous value for calculating the difference in the next query. Also, update the HW statistics structure with new fields. Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-02-28RDMA/bnxt_re: Fix incorrect DB offset calculationDevesh Sharma1-1/+24
To support host systems with non 4K page size, l2_db_size shall be calculated with 4096 instead of PAGE_SIZE. Also, supply the host page size to FW during initialization. Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-01-18RDMA/bnxt_re: expose detailed stats retrieved from HWSelvin Xavier1-0/+89
Broadcom's adapter supports more granular statistics to allow better understanding about the state of the chip when data traffic is flowing. Exposing the detailed stats to the consumer through the standard hook available in the kverbs interface. In order to retrieve all the information, driver implements a firmware command. Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-01-18RDMA/bnxt_re: Add support for MRs with Huge pagesSomnath Kotur1-1/+27
Depending on the OS page-table configurations, applications may request MRs which has page size alignment other than 4K Underlying provider driver needs to adjust its PBL boundaries according to the incoming page boundaries in the PA list. Adding a capability to register MRs having pages-sizes other than 4K (Hugepages). Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-01-17RDMA/bnxt_re: Enable RoCE on virtual functionsSelvin Xavier1-0/+10
RoCE can be used by virtual functions (VFs) as well. Adding code changes to allow resource reservation, initialization and avail the resources to the RDMA applications running on those VFs. Currently, fifty percent of the total available resources are reserved for PF and remaining are equally divided among active VFs. Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-10-18bnxt_re: Make room for mapping beyond 32 entriesSomnath Kotur1-1/+1
Latest chip requires indexes 32 to 47 be used for the internal HW block that manages queue mapping. Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com> Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-24RDMA/bnxt_re: Add vlan tag for untagged RoCE traffic when PFC is configuredKalesh AP1-2/+2
Current implementation does not program vlan header insertion in RoCE packet if no vlan is configured. Firmware does not add prority when there is no vlan tag in the packet. Modify the code to insert vlan header when PFC is enabled on the interface. Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-14RDMA/bnxt_re: Add bnxt_re RoCE driverSelvin Xavier1-0/+2821
This patch introduces the RoCE driver for the Broadcom NetXtreme-E 10/25/40/50G RoCE HCAs. The RoCE driver is a two part driver that relies on the parent bnxt_en NIC driver to operate. The changes needed in the bnxt_en driver have already been incorporated via Dave Miller's net tree into the mainline kernel. The vendor official git repository for this driver is available on github as: https://github.com/Broadcom/linux-rdma-nxt/ Signed-off-by: Eddie Wai <eddie.wai@broadcom.com> Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com> Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>