aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/infiniband/hw/cxgb3/iwch.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2010-04-28RDMA/cxgb3: Shrink .text with compile-time init of handlers arraysRoland Dreier1-2/+0
Using compile-time designated initializers for the handler arrays instead of open-coding the initialization in iwch_cm_init() is (IMHO) cleaner, and leads to substantially smaller code: on my x86-64 build, bloat-o-meter shows: add/remove: 0/1 grow/shrink: 4/3 up/down: 4/-1682 (-1678) function old new delta tx_ack 167 168 +1 state_set 55 56 +1 start_ep_timer 99 100 +1 pass_establish 177 178 +1 act_open_req_arp_failure 39 38 -1 sched 84 82 -2 iwch_cm_init 442 91 -351 work_handlers 1328 - -1328 Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-03-11RDMA/cxgb3: Wait at least one schedule cycle during device removalSteve Wise1-0/+2
During a hot-plug LLD removal event or an EEH error event, iw_cxgb3 must ensure that any/all threads that might be in a cxgb3 exported function must return from the function before iw_cxgb3 returns from its event processing. Do this by calling synchronize_net(). Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-02-24RDMA/cxgb3: Mark RDMA device with CXIO_ERROR_FATAL when removingSteve Wise1-0/+1
If cxgb3 calls the iw_cxgb3 t3cclient remove function due to a device removal event, then the iwch device must be marked with CXIO_ERROR_FATAL since the device below us is going away. Otherwise, we can get stuck in a deadlock as RDMA ULPs try and deallocate objects (like MRs, QPs, etc). So always mark the device with CXIO_ERROR_FATAL when removing. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-02-24RDMA/cxgb3: Doorbell overflow avoidance and recoverySteve Wise1-4/+75
T3 hardware doorbell FIFO overflows can cause application stalls due to lost doorbell ring events. This has been seen when running large NP IMB alltoall MPI jobs. The T3 hardware supports an xon/xoff-type flow control mechanism to help avoid overflowing the HW doorbell FIFO. This patch uses these interrupts to disable RDMA QP doorbell rings when we near an overflow condition, and then turn them back on (and ring all the active QP doorbells) when when the doorbell FIFO empties out. In addition if an doorbell ring is dropped by the hardware, the code will now recover. Design: cxgb3: - enable these DB interrupts - in the interrupt handler, schedule work tasks to call the ULPs event handlers with the new events. - ring all the qset txqs when an overflow is detected. iw_cxgb3: - disable db ringing on all active qps when we get the DB_FULL event - enable db ringing on all active qps and ring all active dbs when we get the DB_EMPTY event - On DB_DROP event: - disable db rings in the event handler - delay-schedule a work task which rings and enables the dbs on all active qps. - in post_send and post_recv logic, don't ring the db if it's disabled. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-09-10Merge branches 'cxgb3', 'ehca', 'ipath', 'ipoib', 'misc', 'mlx4', 'mthca' and 'nes' into for-linusRoland Dreier1-3/+1
2009-09-09RDMA/cxgb3: Clean up properly on FW mismatch failuresSteve Wise1-1/+4
FW mismatches can cause a crash in the iw_cxgb3 event handler. - NULL the t3cdev->ulp pointer on failures in cxio_rdev_open() - Silently ignore events when the ulp ptr is NULL in iwch_err_handler() Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-09-05IB: Use printk_once() for driver versionsMarcin Slusarz1-3/+1
Replace open-coded reimplementations with printk_once(). Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-09-05RDMA/cxgb3: Handle port events properlySteve Wise1-8/+20
Massage the err_handler upcall into an event handler upcall, pass netdev port events to the cxgb3 ULPs and generate RDMA port events based on LLD port events. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-03-30RDMA/cxgb3: Handle EEH eventsSteve Wise1-2/+9
- wrap calls into cxgb3 and fail them if we're in the middle of a PCI EEH event. - correctly unwind and release endpoint and other resources when we are in an EEH event. - dispatch IB_EVENT_DEVICE_FATAL event when cxgb3 notifies iw_cxgb3 of a fatal error. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-01-26iw_cxgb3: handle chip reset notificationsDivy Le Ray1-1/+14
Freeze activity when notified that the underlying chip is getting reset on a EEH event or fatal error. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-14RDMA/cxgb3: Propagate HW page size capabilitiesJon Mason1-1/+1
cxgb3 does not currently report the page size capabilities, and incorrectly reports them internally. This version changes the bit-shifting to a static value (per Steve's request). Signed-off-by: Jon Mason <jon@opengridcomputing.com> Acked-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-14RDMA/cxgb3: Remove write-only iwch_rnic_attributes fieldsRoland Dreier1-2/+0
The members struct iwch_rnic_attributes.vendor_id and .vendor_part_id are write-only, so we might as well get rid of them. Signed-off-by: Roland Dreier <rolandd@cisco.com> Acked-by: Steve Wise <swise@opengridcomputing.com>
2008-07-14RDMA/cxgb3: Fix up some ib_device_attr fieldsSteve Wise1-2/+2
- set fw_ver - set hw_ver - set max_qp_wr to something reasonable - set max_cqe to something reasonable Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-29RDMA/cxgb3: Set the max_mr_size device attribute correctlySteve Wise1-0/+1
cxgb3 only supports 4GB memory regions. The lustre RDMA code uses this attribute and currently has to code around our bad setting. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-16IB: Replace remaining __FUNCTION__ occurrences with __func__Harvey Harrison1-3/+3
__FUNCTION__ is gcc-specific, use __func__ instead. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-16RDMA/cxgb3: Remove Open Grid Computing copyrights in iw_cxgb3 driverSteve Wise1-1/+0
Remove the Open Grid Computing copyright. It shouldn't be there. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-12RDMA/cxgb3: Add driver for Chelsio T3 RNICSteve Wise1-0/+189
Add an RDMA/iWARP driver for the Chelsio T3 1GbE and 10GbE adapters. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.