aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/infiniband/hw/cxgb4/cm.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2013-08-12RDMA/cma: Add IPv6 support for iWARPSteve Wise1-26/+29
Modify the type of local_addr and remote_addr fields in struct iw_cm_id from struct sockaddr_in to struct sockaddr_storage to hold IPv6 and IPv4 addresses uniformly. Change the references of local_addr and remote_addr in cxgb4, cxgb3, nes and amso drivers to match this. However to be able to actully run traffic over IPv6, low-level drivers have to add code to support this. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Reviewed-by: Sean Hefty <sean.hefty@intel.com> [ Fix unused variable warnings when INFINIBAND_NES_DEBUG not set. - Roland ] Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-03-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+12
Pull in the 'net' tree to get Daniel Borkmann's flow dissector infrastructure change. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-17tcp: Remove TCPCTChristoph Paasch1-1/+1
TCPCT uses option-number 253, reserved for experimental use and should not be used in production environments. Further, TCPCT does not fully implement RFC 6013. As a nice side-effect, removing TCPCT increases TCP's performance for very short flows: Doing an apache-benchmark with -c 100 -n 100000, sending HTTP-requests for files of 1KB size. before this patch: average (among 7 runs) of 20845.5 Requests/Second after: average (among 7 runs) of 21403.6 Requests/Second Signed-off-by: Christoph Paasch <christoph.paasch@uclouvain.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-15Fix dst_neigh_lookup/dst_neigh_lookup_skb return value handling bugZhouyi Zhou1-0/+12
When neighbour table is full, dst_neigh_lookup/dst_neigh_lookup_skb will return -ENOBUFS which is absolutely non zero, while all the code in kernel which use above functions assume failure only on zero return which will cause panic. (for example: : https://bugzilla.kernel.org/show_bug.cgi?id=54731). This patch corrects above error with smallest changes to kernel source code and also correct two return value check missing bugs in drivers/infiniband/hw/cxgb4/cm.c Tested on my x86_64 SMP machine Reported-by: Zhouyi Zhou <zhouzhouyi@gmail.com> Tested-by: Zhouyi Zhou <zhouzhouyi@gmail.com> Signed-off-by: Zhouyi Zhou <zhouzhouyi@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-14RDMA/cxgb4: Bump tcam_full stat and WR reply timeoutVipul Pandya1-1/+1
Always bump the tcam_full stat. Also, bump wr reply timeout to 30 seconds. Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-14RDMA/cxgb4: Add Support for Chelsio T5 adapterVipul Pandya1-17/+47
Adds support for Chelsio T5 adapter. Enables T5's Write Combining feature. Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-14RDMA/cxgb4: "cookie" can stay in host endiannessPaul Bolle1-2/+2
Work requests are passed between the host and the firmware with a "cookie". This cookie is swapped to big-endian when passed to the firmware and back to host endianness on return. This swapping seems to be implemented incorrectly. Moreover, the byte swapping triggers GCC warnings on 32 bit: drivers/infiniband/hw/cxgb4/cm.c: In function ‘passive_ofld_conn_reply’: drivers/infiniband/hw/cxgb4/cm.c:2803:12: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] drivers/infiniband/hw/cxgb4/cm.c: In function ‘send_fw_pass_open_req’: drivers/infiniband/hw/cxgb4/cm.c:2941:16: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] [...] But byte swapping isn't needed as the firmware doesn't actually touch the cookie. Dropping byte swapping makes the warnings go away too. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-02-14RDMA/cxgb4: Address sparse warningsVipul Pandya1-30/+38
Fixe the following types of sparse warnings - cast to pointer from integer of different size - cast from pointer to integer of different size - incorrect type in assignment (different base types) - incorrect type in argument 1 (different base types) - cast from restricted __be64 - cast from restricted __be32 Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-02-14RDMA/cxgb4: Insert hwtid in pass_accept_req instead in pass_establishVipul Pandya1-1/+1
CPL_ABORT_REQ_RSS can come before TCP connection is established. In such case peer_abort was trying to remove the hwtid, which was not inserted. To avoid this we insert the hwtid when we are sure that we are surely going to send passive accept request. Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-02-14RDMA/cxgb4: Don't wakeup threads for MPAv2Vipul Pandya1-1/+11
Don't wakeup threads blocked in rdma_init/rdma_fini if we are on MPAv2, and want to retry connection with MPAv1. Stop ep-timer on getting MPA version mismatch, before doing the abort_connection - in process_mpa_request. Take care to stop ep-timer in error paths for process_mpa_request. Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-02-14RDMA/cxgb4: Don't reconnect on abort for mpa_rev 1Vipul Pandya1-6/+5
Only reconnect if the endpoint wasn't freed. peer_abort() should only attempt to reconnect if the endpoint wasn't freed. Also remove hwtid from the debugfs idr. Add missing check for peer2peer in MPAv2 code Use correct mpa version on reject. Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-02-14RDMA/cxgb4: Fix endpoint timeout race conditionVipul Pandya1-13/+16
The endpoint timeout logic had a race that could cause an endpoint object to be freed while it was still on the timedout list. This can happen if the timer is stopped after it had fired, but before the timedout thread processed the endpoint timeout. Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-02-14RDMA/cxgb4: Only log rx_data warnings if cpl status is non-zeroVipul Pandya1-1/+1
With newer firmware, we can get streaming data due to connection errors before the driver moves the QP out of RTS. Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-02-14RDMA/cxgb4: Always log async errorsVipul Pandya1-3/+3
Log AEs even if the QP isn't in RTS. It is useful information. Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-02-14RDMA/cxgb4: Keep QP referenced until TID releasedVipul Pandya1-4/+16
The driver is currently releasing the last ref on the QP too early. This can cause bus errors due to HW still fetching WRs from the HW queue. The fix is to keep a qp ref until we release the HW TID. Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-02-14RDMA/cxgb4: Display streaming mode error only if detected in RTSVipul Pandya1-12/+14
With later firmware, the chances of getting streaming mode data after we exit RTS is likely, so we don't need to warn for it. The only real case where we don't expect it is when the QP is in RTS. Move QP to ERROR when streaming mode data received. Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-02-14RDMA/cxgb4: Abort connections when moving to ERROR stateVipul Pandya1-0/+1
If a FINI operation fails, then we need to ABORT instead of CLOSE. Also, if we ABORT due to unexpected STREAMING data, then wake up anybody blocked in FINI... Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-02-14RDMA/cxgb4: Abort connections that receive unexpected streaming mode dataVipul Pandya1-9/+10
This error means the RDMA connection was knocked out of RDMA mode, probably due to an error on the connection. Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-12-19RDMA/cxgb4: Fix bug for active and passive LE hash collision pathVipul Pandya1-82/+195
Retries active opens for INUSE errors. Logs any active ofld_connect_wr error replies. Sends ofld_connect_wr on same ctrlq. It needs to go on the same control txq as regular CPL active/passive messages. Retries on active open replies with EADDRINUSE. Uses active open fw wr only if active filter region is set. Adds stat for ofld_connect_wr failures. This patch also adds debugfs file to show endpoints. Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-12-19RDMA/cxgb4: Fix LE hash collision bug for passive open connectionVipul Pandya1-49/+363
It establishes passive open connection through firmware work request. Passive open connection will go through this path as now instead of listening server we create a server filter which will redirect the incoming SYN packet to the offload queue. After this driver tries to establish the connection using firmware work request. Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-12-19RDMA/cxgb4: Fix LE hash collision bug for active open connectionVipul Pandya1-6/+152
It enables establishing active open connection using fw_ofld_connection work request when cpl_act_open_rpl says TCAM full error which may be because of LE hash collision. Current support is only for IPv4 active open connections. Sets ntuple bits in active open requests. For T4 firmware greater than 1.4.10.0 ntuple bits are required to be set. Adds nocong and enable_ecn module parameter options. Signed-off-by: Vipul Pandya <vipul@chelsio.com> [ Move all FW return values to t4fw_api.h. - Roland ] Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-11-26RDMA/cxgb4: use WARNJulia Lawall1-4/+2
Use WARN rather than printk followed by WARN_ON(1), for conciseness. A simplified version of the semantic patch that makes this transformation is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression list es; @@ -printk( +WARN(1, es); -WARN_ON(1); // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-09-07RDMA/cxgb4: Move dereference below NULL testWei Yongjun1-1/+1
spatch with a semantic match is used to found this. (http://coccinelle.lip6.fr/) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-07-08RDMA/cxgb4: Fix endianness of addition to mpa->private_data_sizeRoland Dreier1-6/+6
sparse correctly warns that if mpa->private_data_size is __be16, then doing += on it is wrong, even if we do += htons(<something>) -- on a little endian system, carries will go the wrong way. Fix this up by doing the addition in native byte order. Acked-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-06-03RDMA/cxgb4: Fix crash when peer address is 0.0.0.0Thadeu Lima de Souza Cascardo1-0/+4
When using rping -c -a 0.0.0.0 with iw_cxgb4, the system crashes when rdma_connect() is called. ip_dev_find() will return NULL, but pdev is accessed anyway. Checking that pdev is NULL and returning -ENODEV prevents the system from crashing. Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Acked-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-18RDMA/cxgb4: Use vmalloc() for debugfs QP dumpVipul Pandya1-0/+18
This allows dumping thousands of QPs. Log active open failures of interest. Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-18RDMA/cxgb4: Disable interrupts in c4iw_ev_dispatch()Vipul Pandya1-1/+4
Use GFP_ATOMIC in _insert_handle() if ints are disabled. Don't panic if we get an abort with no endpoint found. Just log a warning. Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-15RDMA/cxgb4: Drop peer_abort when no endpoint foundSteve Wise1-0/+6
Log a warning and drop the abort message. Otherwise we will do a bogus wake_up() and crash. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Cc: <stable@vger.kernel.org> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-15RDMA/cxgb4: Always wake up waiters in c4iw_peer_abort_intr()Steve Wise1-4/+1
This fixes a race where an ingress abort fails to wake up the thread blocked in rdma_init() causing the app to hang. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Cc: <stable@vger.kernel.org> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-08RDMA/cxgb4: Use dst parameter in import_ep()Steve Wise1-1/+1
Function import_ep() is incorrectly using ep->dst instead of the dst ptr passed in. This causes a crash when accepting new rdma connections becase ep->dst is not initialized yet. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Cc: <stable@vger.kernel.org> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-03-21Merge tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infinibandLinus Torvalds1-1/+1
Pull InfiniBand/RDMA changes for the 3.4 merge window from Roland Dreier: "Nothing big really stands out; by patch count lots of fixes to the mlx4 driver plus some cleanups and fixes to the core and other drivers." * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (28 commits) mlx4_core: Scale size of MTT table with system RAM mlx4_core: Allow dynamic MTU configuration for IB ports IB/mlx4: Fix info returned when querying IBoE ports IB/mlx4: Fix possible missed completion event mlx4_core: Report thermal error events mlx4_core: Fix one more static exported function IB: Change CQE "csum_ok" field to a bit flag RDMA/iwcm: Reject connect requests if cmid is not in LISTEN state RDMA/cxgb3: Don't pass irq flags to flush_qp() mlx4_core: Get rid of redundant ext_port_cap flags RDMA/ucma: Fix AB-BA deadlock IB/ehca: Fix ilog2() compile failure IB: Use central enum for speed instead of hard-coded values IB/iser: Post initial receive buffers before sending the final login request IB/iser: Free IB connection resources in the proper place IB/srp: Consolidate repetitive sysfs code IB/srp: Use pr_fmt() and pr_err()/pr_warn() IB/core: Fix SDR rates in sysfs mlx4: Enforce device max FMR maps in FMR alloc IB/mlx4: Set bad_wr for invalid send opcode ...
2012-02-25RDMA/cxgb4: Add missing peer2peer check in MPAv2 codeKumar Sanghvi1-1/+1
Don't worry about p2p_type if peer2peer itself is not requested in the first place. Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-01-25infiniband: cxgb4: Convert import_ep() over to dst_neigh_lookup().David Miller1-4/+6
Now we must provide the IP destination address, and a reference has to be dropped when we're done with the entry. Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-05infiniband: cxgb4: Consolidate 3 copies of the same operation into 1 helper function.David Miller1-140/+80
Three pieces of code do the same thing, create a l2t entry and then import this information into the c4iw_ep object. Create a helper function and call it from these 3 locations instead. Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Roland Dreier <roland@purestorage.com>
2011-12-05net: Rename dst_get_neighbour{, _raw} to dst_get_neighbour_noref{, _raw}.David Miller1-3/+3
To reflect the fact that a refrence is not obtained to the resulting neighbour entry. Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Roland Dreier <roland@purestorage.com>
2011-11-29Merge branches 'cxgb4', 'ipoib', 'misc' and 'qib' into for-nextRoland Dreier1-0/+6
2011-11-29IB: Fix RCU lockdep splatsEric Dumazet1-0/+6
Commit f2c31e32b37 ("net: fix NULL dereferences in check_peer_redir()") forgot to take care of infiniband uses of dst neighbours. Many thanks to Marc Aurele who provided a nice bug report and feedback. Reported-by: Marc Aurele La France <tsi@ualberta.ca> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: David Miller <davem@davemloft.net> Cc: <stable@kernel.org> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-11-28RDMA/cxgb4: Fix retry with MPAv1 logic for MPAv2Kumar Sanghvi1-1/+3
Fix logic so that we don't retry with MPAv1 once we have done that already. Otherwise, we end up retrying with MPAv1 even when its not needed on getting peer aborts - and this could lead to kernel panic. Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-10-06RDMA/cxgb4: Add support for MPAv2 Enhanced RDMA NegotiationKumar Sanghvi1-36/+433
This patch adds support for Enhanced RDMA Connection Establishment (draft-ietf-storm-mpa-peer-connect-06), aka MPAv2. Details of draft can be obtained from: <http://www.ietf.org/id/draft-ietf-storm-mpa-peer-connect-06.txt> The patch updates the following functions for initiator perspective: - send_mpa_request - process_mpa_reply - post_terminate for TERM error codes - destroy_qp for TERM related change - adds layer/etype/ecode to c4iw_qp_attrs for sending with TERM - peer_abort for retrying connection attempt with MPA_v1 message - added c4iw_reconnect function The patch updates the following functions for responder perspective: - process_mpa_request - send_mpa_reply - c4iw_accept_cr - passes ird/ord to upper layers Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-07-17net: Abstract dst->neighbour accesses behind helpers.David S. Miller1-21/+21
dst_{get,set}_neighbour() Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-17RDMA/cxgb4: Couple of abort fixesSteve Wise1-9/+37
- fix a race where the driver could end up sending a close_con_req after an abort_rpl. In c4iw_ep_disconnect(), send abort or close request with the ep mutex held. - fix a hang where driver fails to wake up when a connection is reset during a normal close. Wake up any waiters in the interrupt path, and correctly cleanup after rdma_fini() failures. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-05-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6Linus Torvalds1-1/+2
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1446 commits) macvlan: fix panic if lowerdev in a bond tg3: Add braces around 5906 workaround. tg3: Fix NETIF_F_LOOPBACK error macvlan: remove one synchronize_rcu() call networking: NET_CLS_ROUTE4 depends on INET irda: Fix error propagation in ircomm_lmp_connect_response() irda: Kill set but unused variable 'bytes' in irlan_check_command_param() irda: Kill set but unused variable 'clen' in ircomm_connect_indication() rxrpc: Fix set but unused variable 'usage' in rxrpc_get_transport() be2net: Kill set but unused variable 'req' in lancer_fw_download() irda: Kill set but unused vars 'saddr' and 'daddr' in irlan_provider_connect_indication() atl1c: atl1c_resume() is only used when CONFIG_PM_SLEEP is defined. rxrpc: Fix set but unused variable 'usage' in rxrpc_get_peer(). rxrpc: Kill set but unused variable 'local' in rxrpc_UDP_error_handler() rxrpc: Kill set but unused variable 'sp' in rxrpc_process_connection() rxrpc: Kill set but unused variable 'sp' in rxrpc_rotate_tx_window() pkt_sched: Kill set but unused variable 'protocol' in tc_classify() isdn: capi: Use pr_debug() instead of ifdefs. tg3: Update version to 3.119 tg3: Apply rx_discards fix to 5719/5720 ... Fix up trivial conflicts in arch/x86/Kconfig and net/mac80211/agg-tx.c as per Davem.
2011-05-09RDMA/cxgb4: Reset wait condition atomicallySteve Wise1-23/+7
The driver was never really waiting for RDMA_WR/FINI completions because the condition variable used to determine if the completion happened was never reset, and this condition variable is reused for both connection setup and teardown. This causes various driver crashes under heavy loads due to releasing resources too early. The fix is to use atomic bits to correctly reset the condition immediately after the completion is detected. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-05-09RDMA/cxgb4: Don't change QP state outside EP lockSteve Wise1-9/+7
Concurrent ingress CLOSE and ULP ABORT operations causes a crash due to a race condition where the close path releases the EP lock and then tries to move the QP state to CLOSED. This must be done inside the EP lock to avoid the race. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-05-03ipv4: Make caller provide on-stack flow key to ip_route_output_ports().David S. Miller1-1/+2
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6Linus Torvalds1-17/+5
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1480 commits) bonding: enable netpoll without checking link status xfrm: Refcount destination entry on xfrm_lookup net: introduce rx_handler results and logic around that bonding: get rid of IFF_SLAVE_INACTIVE netdev->priv_flag bonding: wrap slave state work net: get rid of multiple bond-related netdevice->priv_flags bonding: register slave pointer for rx_handler be2net: Bump up the version number be2net: Copyright notice change. Update to Emulex instead of ServerEngines e1000e: fix kconfig for crc32 dependency netfilter ebtables: fix xt_AUDIT to work with ebtables xen network backend driver bonding: Improve syslog message at device creation time bonding: Call netif_carrier_off after register_netdevice bonding: Incorrect TX queue offset net_sched: fix ip_tos2prio xfrm: fix __xfrm_route_forward() be2net: Fix UDP packet detected status in RX compl Phonet: fix aligned-mode pipe socket buffer header reserve netxen: support for GbE port settings ... Fix up conflicts in drivers/staging/brcm80211/brcmsmac/wl_mac80211.c with the staging updates.
2011-03-14RDMA/cxgb4: Use ULP_MODE_TCPDDPSteve Wise1-0/+2
Set the ULP mode for initial RDMA connection setup to the proper DDP mode. This avoids wasting some HW resources while in streaming mode. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-03-14RDMA/cxgb4: Turn on delayed ACKSteve Wise1-2/+2
Set the default to on. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-03-12ipv4: Create and use route lookup helpers.David S. Miller1-17/+4
The idea here is this minimizes the number of places one has to edit in order to make changes to how flows are defined and used. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-02ipv4: Make output route lookup return rtable directly.David S. Miller1-1/+2
Instead of on the stack. Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.