aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/infiniband/hw/cxgb4 (follow)
AgeCommit message (Collapse)AuthorFilesLines
2013-11-08IB/cxgb4: Fix formatting of physical addressBen Hutchings1-2/+2
Physical addresses may be wider than virtual addresses (e.g. on i386 with PAE) and must not be formatted with %p. Compile-tested only. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-08-13RDMA/cxgb4: Issue RI.FINI before closing when entering TERMSteve Wise1-1/+6
Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-08-13RDMA/cxgb4: Advertise ~0ULL as max MR sizeSteve Wise1-1/+1
Lustre uses a advertised max MR size of ~0ULL to indicate it should use a dma_mr. Hence advertise max MR size as ~0ULL. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-08-13RDMA/cxgb4: Always do GTS write if cidx_inc == CIDXINC_MASKSteve Wise1-1/+1
When polling, we do a GTS update if the accumulated cidx_inc == the CQ depth / 16. However, if the CQ is large enough, Cq depth / 16 exceeds the size of the field in the GTS word. So we also need to update if cidx_inc hits CIDXINC_MASK to avoid overflowing the field. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-08-13RDMA/cxgb4: Set arp error handler for PASS_ACCEPT_RPL messagesSteve Wise1-0/+2
accept_cr() failed to set the arp error handler on a reused skb. This results in a kernel crash if the arp does indeed time out. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-08-13RDMA/cxgb4: Fix accounting for unsignaled SQ WRs to deal with wrapSteve Wise1-2/+5
When determining how many WRs are completed with a signaled CQE, correctly deal with queue wraps. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-08-13RDMA/cxgb4: Fix QP flush logicSteve Wise4-136/+254
This patch makes following fixes in QP flush logic: - correctly flushes unsignaled WRs followed by a signaled WR - supports for flushing a CQ bound to multiple QPs - resets cidx_flush if a active queue starts getting HW CQEs again - marks WQ in error when we leave RTS. This was only being done for user queues, but we need it for kernel queues too so that post_send/post_recv will start returning the appropriate error synchronously - eats unsignaled read resp CQEs. HW always inserts CQEs so we must silently discard them if the read work request was unsignaled. - handles QP flushes with pending SW CQEs. The flush and out of order completion logic has a bug where if out of order completions are flushed but not yet polled by the consumer and the qp is then flushed then we end up inserting duplicate completions. - c4iw_flush_sq() should only flush wrs that have not already been flushed. Since we already track where in the SQ we've flushed via sq.cidx_flush, just start at that point and flush any remaining. This bug only caused a problem in the presence of unsignaled work requests. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Vipul Pandya <vipul@chelsio.com> [ Fixed sparse warning due to htonl/ntohl confusion. - Roland ] Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-08-13RDMA/cxgb4: Handle newer firmware changesSteve Wise2-13/+2
Move QP to TERMINATE instead to allow the peer to get the TERM message. This bug wasn't detectable until newer FW that moves connections out of RDMA mode as soon as an error is detected. QP can exit RTS before the last AE arrives. This was introduced by changes in the FW to kick connections out of RDMA mode as soon as an error is detected. A side effect of this is that the driver can move the QP out of RTS before the AE causing the connection to get kicked out of RDMA mode is processed. Fix for this is to always post async errors even if the QP is out of RTS. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-08-13RDMA/cxgb4: Use correct bit shift macros for vlan filter tuplesSteve Wise1-1/+1
Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-08-13RDMA/cxgb4: Add support for active and passive open connection with IPv6 addressVipul Pandya4-300/+636
Add new cpl messages, cpl_act_open_req6 and cpl_t5_act_open_req6, for initiating active open connections. Use LLD api cxgb4_create_server and cxgb4_create_server6 for initiating passive open connections. Similarly use cxgb4_remove_server to remove the passive open connections in place of listen_stop. Add support for iWARP over VLAN device and enable IPv6 support on VLAN device. Make use of import_ep in c4iw_reconnect. Signed-off-by: Vipul Pandya <vipul@chelsio.com> [ Fix build when IPv6 is disabled and make sure iw_cxgb4 is not built-in when ipv6 is a module. - Roland ] Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-08-12RDMA/cma: Add IPv6 support for iWARPSteve Wise1-26/+29
Modify the type of local_addr and remote_addr fields in struct iw_cm_id from struct sockaddr_in to struct sockaddr_storage to hold IPv6 and IPv4 addresses uniformly. Change the references of local_addr and remote_addr in cxgb4, cxgb3, nes and amso drivers to match this. However to be able to actully run traffic over IPv6, low-level drivers have to add code to support this. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Reviewed-by: Sean Hefty <sean.hefty@intel.com> [ Fix unused variable warnings when INFINIBAND_NES_DEBUG not set. - Roland ] Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-07-30RDMA/cxgb4: Fix stack info leak in c4iw_create_qp()Dan Carpenter1-0/+2
"uresp.ma_sync_key" doesn't get set on this path so we leak 8 bytes of data. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-05-08Merge tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infinibandLinus Torvalds1-9/+13
Pull InfiniBand/RDMA changes from Roland Dreier: - XRC transport fixes - Fix DHCP on IPoIB - mlx4 preparations for flow steering - iSER fixes - miscellaneous other fixes * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (23 commits) IB/iser: Add support for iser CM REQ additional info IB/iser: Return error to upper layers on EAGAIN registration failures IB/iser: Move informational messages from error to info level IB/iser: Add module version mlx4_core: Expose a few helpers to fill DMFS HW strucutures mlx4_core: Directly expose fields of DMFS HW rule control segment mlx4_core: Change a few DMFS fields names to match firmare spec mlx4: Match DMFS promiscuous field names to firmware spec mlx4_core: Move DMFS HW structs to common header file IB/mlx4: Set link type for RAW PACKET QPs in the QP context IB/mlx4: Disable VLAN stripping for RAW PACKET QPs mlx4_core: Reduce warning message for SRQ_LIMIT event to debug level RDMA/iwcm: Don't touch cmid after dropping reference IB/qib: Correct qib_verbs_register_sysfs() error handling IB/ipath: Correct ipath_verbs_register_sysfs() error handling RDMA/cxgb4: Fix SQ allocation when on-chip SQ is disabled SRPT: Fix odd use of WARN_ON() IPoIB: Fix ipoib_hard_header() return value RDMA: Rename random32() to prandom_u32() RDMA/cxgb3: Fix uninitialized variable ...
2013-05-08Merge branches 'cxgb4', 'ipoib', 'iser', 'misc', 'mlx4', 'qib' and 'srp' into for-nextRoland Dreier1-2/+2
2013-05-07drivers/infiniband/hw: rename random32() to prandom_u32()Andrew Morton1-2/+2
Use preferable function name which implies using a pseudo-random number generator. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-16RDMA/cxgb4: Fix SQ allocation when on-chip SQ is disabledThadeu Lima de Souza Cascardo1-12/+13
Commit c079c28714e4 ("RDMA/cxgb4: Fix error handling in create_qp()") broke SQ allocation. Instead of falling back to host allocation when on-chip allocation fails, it tries to allocate both. And when it does, and we try to free the address from the genpool using the host address, we hit a BUG and the system crashes as below. We create a new function that has the previous behavior and properly propagate the error, as intended. kernel BUG at /usr/src/packages/BUILD/kernel-ppc64-3.0.68/linux-3.0/lib/genalloc.c:340! Oops: Exception in kernel mode, sig: 5 [#1] SMP NR_CPUS=1024 NUMA pSeries Modules linked in: rdma_ucm rdma_cm ib_addr ib_cm iw_cm ib_sa ib_mad ib_uverbs iw_cxgb4 ib_core ip6t_LOG xt_tcpudp xt_pkttype ipt_LOG xt_limit ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_raw xt_NOTRACK ipt_REJECT xt_state iptable_raw iptable_filter ip6table_mangle nf_conntrack_netbios_ns nf_conntrack_broadcast nf_conntrack_ipv4 nf_conntrack nf_defrag_ipv4 ip_tables ip6table_filter ip6_tables x_tables fuse loop dm_mod ipv6 ipv6_lib sr_mod cdrom ibmveth(X) cxgb4 sg ext3 jbd mbcache sd_mod crc_t10dif scsi_dh_emc scsi_dh_hp_sw scsi_dh_alua scsi_dh_rdac scsi_dh ibmvscsic(X) scsi_transport_srp scsi_tgt scsi_mod Supported: Yes NIP: c00000000037d41c LR: d000000003913824 CTR: c00000000037d3b0 REGS: c0000001f350ae50 TRAP: 0700 Tainted: G X (3.0.68-0.9-ppc64) MSR: 8000000000029032 <EE,ME,CE,IR,DR> CR: 24042482 XER: 00000001 TASK = c0000001f6f2a840[3616] 'rping' THREAD: c0000001f3508000 CPU: 0 GPR00: c0000001f6e875c8 c0000001f350b0d0 c000000000fc9690 c0000001f6e875c0 GPR04: 00000000000c0000 0000000000010000 0000000000000000 c0000000009d482a GPR08: 000000006a170000 0000000000100000 c0000001f350b140 c0000001f6e875c8 GPR12: d000000003915dd0 c000000003f40000 000000003e3ecfa8 c0000001f350bea0 GPR16: c0000001f350bcd0 00000000003c0000 0000000000040100 c0000001f6e74a80 GPR20: d00000000399a898 c0000001f6e74ac8 c0000001fad91600 c0000001f6e74ab0 GPR24: c0000001f7d23f80 0000000000000000 0000000000000002 000000006a170000 GPR28: 000000000000000c c0000001f584c8d0 d000000003925180 c0000001f6e875c8 NIP [c00000000037d41c] .gen_pool_free+0x6c/0xf8 LR [d000000003913824] .c4iw_ocqp_pool_free+0x8c/0xd8 [iw_cxgb4] Call Trace: [c0000001f350b0d0] [c0000001f350b180] 0xc0000001f350b180 (unreliable) [c0000001f350b170] [d000000003913824] .c4iw_ocqp_pool_free+0x8c/0xd8 [iw_cxgb4] [c0000001f350b210] [d00000000390fd70] .dealloc_sq+0x90/0xb0 [iw_cxgb4] [c0000001f350b280] [d00000000390fe08] .destroy_qp+0x78/0xf8 [iw_cxgb4] [c0000001f350b310] [d000000003912738] .c4iw_destroy_qp+0x208/0x2d0 [iw_cxgb4] [c0000001f350b460] [d000000003861874] .ib_destroy_qp+0x5c/0x130 [ib_core] [c0000001f350b510] [d0000000039911bc] .ib_uverbs_cleanup_ucontext+0x174/0x4f8 [ib_uverbs] [c0000001f350b5f0] [d000000003991568] .ib_uverbs_close+0x28/0x70 [ib_uverbs] [c0000001f350b670] [c0000000001e7b2c] .__fput+0xdc/0x278 [c0000001f350b720] [c0000000001a9590] .remove_vma+0x68/0xd8 [c0000001f350b7b0] [c0000000001a9720] .exit_mmap+0x120/0x160 [c0000001f350b8d0] [c0000000000af330] .mmput+0x80/0x160 [c0000001f350b960] [c0000000000b5d0c] .exit_mm+0x1ac/0x1e8 [c0000001f350ba10] [c0000000000b8154] .do_exit+0x1b4/0x4b8 [c0000001f350bad0] [c0000000000b84b0] .do_group_exit+0x58/0xf8 [c0000001f350bb60] [c0000000000ce9f4] .get_signal_to_deliver+0x2f4/0x5d0 [c0000001f350bc60] [c000000000017ee4] .do_signal_pending+0x6c/0x3e0 [c0000001f350bdb0] [c0000000000182cc] .do_signal+0x74/0x78 [c0000001f350be30] [c000000000009e74] do_work+0x24/0x28 Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Cc: Emil Goode <emilgoode@gmail.com> Cc: <stable@vger.kernel.org> Acked-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-04-16RDMA: Rename random32() to prandom_u32()Akinobu Mita1-2/+2
Use more preferable function name which implies using a pseudo-random number generator. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Cc: Roland Dreier <roland@kernel.org> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Cc: Steve Wise <swise@chelsio.com> Cc: linux-rdma@vger.kernel.org Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-03-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+3
Conflicts: include/net/ipip.h The changes made to ipip.h in 'net' were already included in 'net-next' before that header was moved to another location. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-25Merge tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infinibandLinus Torvalds1-1/+3
Pull infiniband/rdma fixes from Roland Dreier: "Small batch of InfiniBand/RDMA fixes for 3.9: - Fix for TX lockup in IPoIB - QLogic -> Intel update for qib driver - Small static checker fix for qib - Fix error path return value in cxgb4" * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/qib: change QLogic to Intel IB/ipath: Silence a static checker warning IPoIB: Fix send lockup due to missed TX completion RDMA/cxgb4: Fix error return code in create_qp()
2013-03-22RDMA/cxgb4: Fix error return code in create_qp()Wei Yongjun1-1/+3
Fix to return a negative error code from the error handling case instead of 0, as returned elsewhere in this function. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-03-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+12
Pull in the 'net' tree to get Daniel Borkmann's flow dissector infrastructure change. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-17tcp: Remove TCPCTChristoph Paasch1-1/+1
TCPCT uses option-number 253, reserved for experimental use and should not be used in production environments. Further, TCPCT does not fully implement RFC 6013. As a nice side-effect, removing TCPCT increases TCP's performance for very short flows: Doing an apache-benchmark with -c 100 -n 100000, sending HTTP-requests for files of 1KB size. before this patch: average (among 7 runs) of 20845.5 Requests/Second after: average (among 7 runs) of 21403.6 Requests/Second Signed-off-by: Christoph Paasch <christoph.paasch@uclouvain.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-15Fix dst_neigh_lookup/dst_neigh_lookup_skb return value handling bugZhouyi Zhou1-0/+12
When neighbour table is full, dst_neigh_lookup/dst_neigh_lookup_skb will return -ENOBUFS which is absolutely non zero, while all the code in kernel which use above functions assume failure only on zero return which will cause panic. (for example: : https://bugzilla.kernel.org/show_bug.cgi?id=54731). This patch corrects above error with smallest changes to kernel source code and also correct two return value check missing bugs in drivers/infiniband/hw/cxgb4/cm.c Tested on my x86_64 SMP machine Reported-by: Zhouyi Zhou <zhouzhouyi@gmail.com> Tested-by: Zhouyi Zhou <zhouzhouyi@gmail.com> Signed-off-by: Zhouyi Zhou <zhouzhouyi@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-14RDMA/cxgb4: Fix onchip queue support for T5Vipul Pandya1-8/+5
T5 adapter does not support onchip queue memory. Present logic fails to allocate QP for T5 and returns an error. Also, if module parameter ocqp_support is zero then we are unable to allocate QP which should not be the case. Ideally if ocqp_support parameter is 0 or onchip queue support is disable then host QP should be allocated before returning an error. Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-14RDMA/cxgb4: Bump tcam_full stat and WR reply timeoutVipul Pandya2-2/+2
Always bump the tcam_full stat. Also, bump wr reply timeout to 30 seconds. Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-14RDMA/cxgb4: Map pbl buffers for dma if using DSGL.Vipul Pandya1-6/+23
Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-14RDMA/cxgb4: Use DSGLs for fastreg and adapter memory writes for T5.Vipul Pandya4-36/+182
It enables direct DMA by HW to memory region PBL arrays and fast register PBL arrays from host memory, vs the T4 way of passing these arrays in the WR itself. The result is lower latency for memory registration, and larger PBL array support for fast register operations. This patch also updates ULP_TX_MEM_WRITE command fields for T5. Ordering bit of ULP_TX_MEM_WRITE is at bit position 22 in T5 and at 23 in T4. Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-14RDMA/cxgb4: Add module_params to enable DB FC & Coalescing on T5Vipul Pandya3-6/+30
Both DB Flow-Control and DB Coalescing are disabled by default on T5 Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-14RDMA/cxgb4: Turn off db coalescing when RDMA QPs are in use.Vipul Pandya1-4/+16
Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-14RDMA/cxgb4: Add Support for Chelsio T5 adapterVipul Pandya6-35/+77
Adds support for Chelsio T5 adapter. Enables T5's Write Combining feature. Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-27IB/cxgb4: convert to idr_alloc()Tejun Heo1-13/+14
Convert to the much saner new idr interface. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-26Merge branches 'core', 'cxgb4', 'ipoib', 'iser', 'misc', 'mlx4', 'qib' and 'srp' into for-nextRoland Dreier5-72/+114
2013-02-21IB/core: Add "type 2" memory windows supportShani Michaeli2-2/+5
This patch enhances the IB core support for Memory Windows (MWs). MWs allow an application to have better/flexible control over remote access to memory. Two types of MWs are supported, with the second type having two flavors: Type 1 - associated with PD only Type 2A - associated with QPN only Type 2B - associated with PD and QPN Applications can allocate a MW once, and then repeatedly bind the MW to different ranges in MRs that are associated to the same PD. Type 1 windows are bound through a verb, while type 2 windows are bound by posting a work request. The 32-bit memory key is composed of a 24-bit index and an 8-bit key. The key is changed with each bind, thus allowing more control over the peer's use of the memory key. The changes introduced are the following: * add memory window type enum and a corresponding parameter to ib_alloc_mw. * type 2 memory window bind work request support. * create a struct that contains the common part of the bind verb struct ibv_mw_bind and the bind work request into a single struct. * add the ib_inc_rkey helper function to advance the tag part of an rkey. Consumer interface details: * new device capability flags IB_DEVICE_MEM_WINDOW_TYPE_2A and IB_DEVICE_MEM_WINDOW_TYPE_2B are added to indicate device support for these features. Devices can set either IB_DEVICE_MEM_WINDOW_TYPE_2A or IB_DEVICE_MEM_WINDOW_TYPE_2B if it supports type 2A or type 2B memory windows. It can set neither to indicate it doesn't support type 2 windows at all. * modify existing provides and consumers code to the new param of ib_alloc_mw and the ib_mw_bind_info structure Signed-off-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Shani Michaeli <shanim@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-02-15RDMA/cxgb4: Fix cast warningStefan Hasko1-1/+1
Fix compile warning about cast to pointer from integer of different size. Signed-off-by: Stefan Hasko <hasko.stevo@gmail.com> Acked-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-02-14RDMA/cxgb4: "cookie" can stay in host endiannessPaul Bolle1-2/+2
Work requests are passed between the host and the firmware with a "cookie". This cookie is swapped to big-endian when passed to the firmware and back to host endianness on return. This swapping seems to be implemented incorrectly. Moreover, the byte swapping triggers GCC warnings on 32 bit: drivers/infiniband/hw/cxgb4/cm.c: In function ‘passive_ofld_conn_reply’: drivers/infiniband/hw/cxgb4/cm.c:2803:12: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] drivers/infiniband/hw/cxgb4/cm.c: In function ‘send_fw_pass_open_req’: drivers/infiniband/hw/cxgb4/cm.c:2941:16: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] [...] But byte swapping isn't needed as the firmware doesn't actually touch the cookie. Dropping byte swapping makes the warnings go away too. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-02-14RDMA/cxgb4: Address sparse warningsVipul Pandya2-31/+40
Fixe the following types of sparse warnings - cast to pointer from integer of different size - cast from pointer to integer of different size - incorrect type in assignment (different base types) - incorrect type in argument 1 (different base types) - cast from restricted __be64 - cast from restricted __be32 Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-02-14RDMA/cxgb4: Insert hwtid in pass_accept_req instead in pass_establishVipul Pandya1-1/+1
CPL_ABORT_REQ_RSS can come before TCP connection is established. In such case peer_abort was trying to remove the hwtid, which was not inserted. To avoid this we insert the hwtid when we are sure that we are surely going to send passive accept request. Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-02-14RDMA/cxgb4: Don't wakeup threads for MPAv2Vipul Pandya1-1/+11
Don't wakeup threads blocked in rdma_init/rdma_fini if we are on MPAv2, and want to retry connection with MPAv1. Stop ep-timer on getting MPA version mismatch, before doing the abort_connection - in process_mpa_request. Take care to stop ep-timer in error paths for process_mpa_request. Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-02-14RDMA/cxgb4: Don't reconnect on abort for mpa_rev 1Vipul Pandya1-6/+5
Only reconnect if the endpoint wasn't freed. peer_abort() should only attempt to reconnect if the endpoint wasn't freed. Also remove hwtid from the debugfs idr. Add missing check for peer2peer in MPAv2 code Use correct mpa version on reject. Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-02-14RDMA/cxgb4: Fix endpoint timeout race conditionVipul Pandya2-13/+17
The endpoint timeout logic had a race that could cause an endpoint object to be freed while it was still on the timedout list. This can happen if the timer is stopped after it had fired, but before the timedout thread processed the endpoint timeout. Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-02-14RDMA/cxgb4: Only log rx_data warnings if cpl status is non-zeroVipul Pandya1-1/+1
With newer firmware, we can get streaming data due to connection errors before the driver moves the QP out of RTS. Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-02-14RDMA/cxgb4: Always log async errorsVipul Pandya2-6/+8
Log AEs even if the QP isn't in RTS. It is useful information. Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-02-14RDMA/cxgb4: Keep QP referenced until TID releasedVipul Pandya2-4/+17
The driver is currently releasing the last ref on the QP too early. This can cause bus errors due to HW still fetching WRs from the HW queue. The fix is to keep a qp ref until we release the HW TID. Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-02-14RDMA/cxgb4: Display streaming mode error only if detected in RTSVipul Pandya1-12/+14
With later firmware, the chances of getting streaming mode data after we exit RTS is likely, so we don't need to warn for it. The only real case where we don't expect it is when the QP is in RTS. Move QP to ERROR when streaming mode data received. Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-02-14RDMA/cxgb4: Abort connections when moving to ERROR stateVipul Pandya2-0/+2
If a FINI operation fails, then we need to ABORT instead of CLOSE. Also, if we ABORT due to unexpected STREAMING data, then wake up anybody blocked in FINI... Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-02-14RDMA/cxgb4: Abort connections that receive unexpected streaming mode dataVipul Pandya1-9/+10
This error means the RDMA connection was knocked out of RDMA mode, probably due to an error on the connection. Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-12-19RDMA/cxgb4: Fix bug for active and passive LE hash collision pathVipul Pandya3-82/+352
Retries active opens for INUSE errors. Logs any active ofld_connect_wr error replies. Sends ofld_connect_wr on same ctrlq. It needs to go on the same control txq as regular CPL active/passive messages. Retries on active open replies with EADDRINUSE. Uses active open fw wr only if active filter region is set. Adds stat for ofld_connect_wr failures. This patch also adds debugfs file to show endpoints. Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-12-19RDMA/cxgb4: Fix LE hash collision bug for passive open connectionVipul Pandya2-55/+442
It establishes passive open connection through firmware work request. Passive open connection will go through this path as now instead of listening server we create a server filter which will redirect the incoming SYN packet to the offload queue. After this driver tries to establish the connection using firmware work request. Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-12-19RDMA/cxgb4: Fix LE hash collision bug for active open connectionVipul Pandya2-6/+153
It enables establishing active open connection using fw_ofld_connection work request when cpl_act_open_rpl says TCAM full error which may be because of LE hash collision. Current support is only for IPv4 active open connections. Sets ntuple bits in active open requests. For T4 firmware greater than 1.4.10.0 ntuple bits are required to be set. Adds nocong and enable_ecn module parameter options. Signed-off-by: Vipul Pandya <vipul@chelsio.com> [ Move all FW return values to t4fw_api.h. - Roland ] Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-11-26RDMA/cxgb4: use WARNJulia Lawall1-4/+2
Use WARN rather than printk followed by WARN_ON(1), for conciseness. A simplified version of the semantic patch that makes this transformation is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression list es; @@ -printk( +WARN(1, es); -WARN_ON(1); // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.