aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/infiniband/hw/hfi1/pcie.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2017-09-27IB/hfi1: Unsuccessful PCIe caps tuning should not fail driver loadHarish Chegondi1-29/+21
Failure to tune PCIe capabilities should not fail driver load. This can cause the driver load to fail on systems with any of the following: 1. HFI's parent is not root. Example: HFI card is behind a PCIe bridge. 2. HFI's parent is not PCI Express capable. In these situations, failure to tune PCIe capabilities should be logged in the system message logs but not cause the driver load to fail. This patch also ensures pcie capability word DevCtl is written only after a successful read and the capability tuning process continues even if read/write of the pcie capability word DevCtl fails. Fixes: c53df62c7a9a ("IB/hfi1: Check return values from PCI config API calls") Fixes: bf70a7757736 ("staging/rdma/hfi1: Enable WFR PCIe extended tags from the driver") Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Jakub Byczkowski <jakub.byczkowski@intel.com> Signed-off-by: Harish Chegondi <harish.chegondi@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-31IB/hfi1: Move saving PCI values to a separate functionBartlomiej Dudek1-52/+58
During PCIe initialization some registers' values from PCI config space are saved in order to restore them later (i.e. after reset). Restoring those value is done by a function called restore_pci_variables, while saving them is put directly into function hfi1_pcie_ddinit. Move saving values to a separate function in the image of restoring functionality. Reviewed-by: Jakub Byczkowski <jakub.byczkowski@intel.com> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Bartlomiej Dudek <bartlomiej.dudek@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-31IB/hfi1: Fix bar0 mapping to use write combiningMike Marciniszyn1-16/+42
When the debugpat kernel boot flag is turned on the following traces are printed: [ 1884.793168] x86/PAT: Overlap at 0x90000000-0x92000000 [ 1884.803510] x86/PAT: reserve_memtype added [mem 0x91200000-0x9127ffff], track uncached-minus, req write-combining, ret uncached-minus [ 1884.818167] hfi1 0000:05:00.0: hfi1_0: WC Remapped RcvArray: ffffc9000a980000 The ioremap_wc() clearly is not returning a write combining mapping due to an overlap where the RcvArray is mapped in a uncached mapping prior to creating the proposed write combining mapping. The patch replaces the single base register for uncached CSRs that used to overlap the RcvArray with two mappings. One, kregbase1, from the bar0 up to the RcvArray and another, kregbase2, from the end of the RcvArray to the pio send buffer space. A new dd field, base2_start, is used to convert the zero-based offset in the CSR routines to the correct kregbase1/kregbase2 mapping. A single direct write of the RcvArray CSRs is replaced with hfi1_put_tid() to insure correct access using the new disjoint mapping. Additionally, the kregend field is deleted since it is only ever written. patdebug now shows the RcvArray as write combining: [ 35.688990] x86/PAT: reserve_memtype added [mem 0x91200000-0x9127ffff], track write-combining, req write-combining, ret write-combining To insulate from any potential issues with write combining, all writeq are now flushed in hfi1_put_tid() and rcv_array_wc_fill(). Reviewed-by: Mitko Haralanov <mitko.haralanov@intel.com> Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-31IB/hfi1: Check return values from PCI config API callsBartlomiej Dudek1-42/+196
Ensure that return values from kernel PCI config access API calls in HFI driver are checked and react properly if they are not expected (i.e. not successful). Reviewed-by: Jakub Byczkowski <jakub.byczkowski@intel.com> Signed-off-by: Bartlomiej Dudek <bartlomiej.dudek@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-06-27IB/hfi1: Replace deprecated pci functions with new APIMichael J. Ruhl1-64/+16
pci_enable_msix_range() and pci_disable_msix() have been deprecated. Updating to the new pci_alloc_irq_vectors() interface. Reviewed-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-06-01RDMA/hfi1: change PCI bar addr assignments to Linux API functionsSteven L. Roberts1-2/+2
The Omni-Path adapter driver fails to load on the ppc64le platform due to invalid PCI setup. This patch makes the PCI configuration more robust and will fix 64 bit addressing for ppc64le. Signed-off-by: Steven L Roberts <robers97@gmail.com> Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-05-08Merge tag 'pci-v4.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds1-30/+0
Pull PCI updates from Bjorn Helgaas: - add framework for supporting PCIe devices in Endpoint mode (Kishon Vijay Abraham I) - use non-postable PCI config space mappings when possible (Lorenzo Pieralisi) - clean up and unify mmap of PCI BARs (David Woodhouse) - export and unify Function Level Reset support (Christoph Hellwig) - avoid FLR for Intel 82579 NICs (Sasha Neftin) - add pci_request_irq() and pci_free_irq() helpers (Christoph Hellwig) - short-circuit config access failures for disconnected devices (Keith Busch) - remove D3 sleep delay when possible (Adrian Hunter) - freeze PME scan before suspending devices (Lukas Wunner) - stop disabling MSI/MSI-X in pci_device_shutdown() (Prarit Bhargava) - disable boot interrupt quirk for ASUS M2N-LR (Stefan Assmann) - add arch-specific alignment control to improve device passthrough by avoiding multiple BARs in a page (Yongji Xie) - add sysfs sriov_drivers_autoprobe to control VF driver binding (Bodong Wang) - allow slots below PCI-to-PCIe "reverse bridges" (Bjorn Helgaas) - fix crashes when unbinding host controllers that don't support removal (Brian Norris) - add driver for MicroSemi Switchtec management interface (Logan Gunthorpe) - add driver for Faraday Technology FTPCI100 host bridge (Linus Walleij) - add i.MX7D support (Andrey Smirnov) - use generic MSI support for Aardvark (Thomas Petazzoni) - make Rockchip driver modular (Brian Norris) - advertise 128-byte Read Completion Boundary support for Rockchip (Shawn Lin) - advertise PCI_EXP_LNKSTA_SLC for Rockchip root port (Shawn Lin) - convert atomic_t to refcount_t in HV driver (Elena Reshetova) - add CPU IRQ affinity in HV driver (K. Y. Srinivasan) - fix PCI bus removal in HV driver (Long Li) - add support for ThunderX2 DMA alias topology (Jayachandran C) - add ThunderX pass2.x 2nd node MCFG quirk (Tomasz Nowicki) - add ITE 8893 bridge DMA alias quirk (Jarod Wilson) - restrict Cavium ACS quirk only to CN81xx/CN83xx/CN88xx devices (Manish Jaggi) * tag 'pci-v4.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (146 commits) PCI: Don't allow unbinding host controllers that aren't prepared ARM: DRA7: clockdomain: Change the CLKTRCTRL of CM_PCIE_CLKSTCTRL to SW_WKUP MAINTAINERS: Add PCI Endpoint maintainer Documentation: PCI: Add userguide for PCI endpoint test function tools: PCI: Add sample test script to invoke pcitest tools: PCI: Add a userspace tool to test PCI endpoint Documentation: misc-devices: Add Documentation for pci-endpoint-test driver misc: Add host side PCI driver for PCI test function device PCI: Add device IDs for DRA74x and DRA72x dt-bindings: PCI: dra7xx: Add DT bindings to enable unaligned access PCI: dwc: dra7xx: Workaround for errata id i870 dt-bindings: PCI: dra7xx: Add DT bindings for PCI dra7xx EP mode PCI: dwc: dra7xx: Add EP mode support PCI: dwc: dra7xx: Facilitate wrapper and MSI interrupts to be enabled independently dt-bindings: PCI: Add DT bindings for PCI designware EP mode PCI: dwc: designware: Add EP mode support Documentation: PCI: Add binding documentation for pci-test endpoint function ixgbe: Use pcie_flr() instead of duplicating it IB/hfi1: Use pcie_flr() instead of duplicating it PCI: imx6: Fix spelling mistake: "contol" -> "control" ...
2017-04-28IB/hfi1: Convert %Lx to %llxDennis Dalessandro1-1/+1
According to checkpatch %Lx is not standard C so remove it and use the suggested %llx. Fixes: 7724105686e7 ("IB/hfi1: add driver files") Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-04-25IB/hfi1: Use pcie_flr() instead of duplicating itChristoph Hellwig1-30/+0
Tested-by: Jakub Byczkowski <jakub.byczkowski@intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Doug Ledford <dledford@redhat.com>
2017-02-19IB/hfi1: Use static CTLE with Preset 6 for integrated HFIsEaswar Hariharan1-2/+2
After extended testing, it was found that the previous PCIe Gen 3 recipe, which used adaptive CTLE with Preset 4, could cause an NMI/Surprise Link Down in about 1 in 100 to 1 in 1000 power cycles on some platforms. New EV data combined with extensive empirical data indicates that the new recipe should use static CTLE with Preset 6 for all integrated silicon SKUs. Fixes: c3f8de0b334c ("IB/hfi1: Add static PCIe Gen3 CTLE tuning") Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Easwar Hariharan <easwar.hariharan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-01-12RDMA/hfi1: drop pci_link_reset()Cao jin1-10/+0
In AER recovery, pci_error_handlers.link_reset() is never called, drop it now. Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-11-15IB/hfi1: Clean up unused argumentEaswar Hariharan1-2/+1
hfi1_pcie_ddinit takes the PCI device id as an argument but never uses it. Clean it up. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Easwar Hariharan <easwar.hariharan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-02IB/hfi1: Add static PCIe Gen3 CTLE tuningDean Luick1-4/+64
Enhance the PCIe Gen3 recipe to support static CTLE tuning, and add a switch to choose between static and dynamic approaches. Make discrete chips default to static CTLE tuning. Reviewed-by: Tadeusz Struk <tadeusz.struk@intel.com> Signed-off-by: Dean Luick <dean.luick@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-05-26IB/hfi1: Move driver out of stagingDennis Dalessandro1-0/+1338
The TODO list for the hfi1 driver was completed during 4.6. In addition other objections raised (which are far beyond what was in the TODO list) have been addressed as well. It is now time to remove the driver from staging and into the drivers/infiniband sub-tree. Reviewed-by: Jubin John <jubin.john@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>