aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/infiniband/hw/hfi1/verbs.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2022-09-05RDMA/hfi1: Remove the unneeded result variableye xingchen1-3/+1
Return the value set_link_state() directly instead of storing it in another redundant variable. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn> Link: https://lore.kernel.org/r/20220901074209.313004-1-ye.xingchen@zte.com.cn Signed-off-by: Leon Romanovsky <leon@kernel.org>
2022-08-21IB: move from strlcpy with unused retval to strscpyWolfram Sang1-1/+1
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Link: https://lore.kernel.org/r/20220818210018.6841-1-wsa+renesas@sang-engineering.com Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2022-04-06RDMA: Split kernel-only global device caps from uverbs device capsJason Gunthorpe1-2/+2
Split out flags from ib_device::device_cap_flags that are only used internally to the kernel into kernel_cap_flags that is not part of the uapi. This limits the device_cap_flags to being the same bitmap that will be copied to userspace. This cleanly splits out the uverbs flags from the kernel flags to avoid confusion in the flags bitmap. Add some short comments describing which each of the kernel flags is connected to. Remove unused kernel flags. Link: https://lore.kernel.org/r/0-v2-22c19e565eef+139a-kern_caps_jgg@nvidia.com Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2022-03-04IB/hfi1: Allow larger MTU without AIPMike Marciniszyn1-2/+1
The AIP code signals the phys_mtu in the following query_port() fragment: props->phys_mtu = HFI1_CAP_IS_KSET(AIP) ? hfi1_max_mtu : ib_mtu_enum_to_int(props->max_mtu); Using the largest MTU possible should not depend on AIP. Fix by unconditionally using the hfi1_max_mtu value. Fixes: 6d72344cf6c4 ("IB/ipoib: Increase ipoib Datagram mode MTU's upper limit") Link: https://lore.kernel.org/r/1644348309-174874-1-git-send-email-mike.marciniszyn@cornelisnetworks.com Reviewed-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-11-16IB/hfi1: Properly allocate rdma counter desc memoryDennis Dalessandro1-3/+2
When optional counter support was added the allocation of the memory holding the counter descriptors was not cleared properly. This caused WARN_ON()s in the IB/sysfs code to be hit. This is because the uninitialized memory made some of the counters wrongly look like optional counters. Use kzalloc. While here change the sizeof() calls to use the pointer rather than the name of the type. WARNING: CPU: 0 PID: 32644 at drivers/infiniband/core/sysfs.c:1064 ib_setup_port_attrs+0x7e1/0x890 [ib_core] CPU: 0 PID: 32644 Comm: kworker/0:2 Tainted: G S W 5.15.0+ #36 Hardware name: Intel Corporation S2600WTT/S2600WTT, BIOS SE5C610.86B.01.01.0018.C4.072020161249 07/20/2016 Workqueue: events work_for_cpu_fn RIP: 0010:ib_setup_port_attrs+0x7e1/0x890 [ib_core] RSP: 0018:ffffc90006ea3c40 EFLAGS: 00010202 RAX: 0000000000000068 RBX: ffff888106ad8000 RCX: 0000000000000138 RDX: ffff888126c84c00 RSI: ffff888103c41000 RDI: 0000000000000124 RBP: ffff88810f63a801 R08: ffff888126c8a000 R09: 0000000000000001 R10: ffffffffa09acf20 R11: 0000000000000065 R12: ffff88810f63a800 R13: ffff88810f63a800 R14: ffff88810f63a8e0 R15: 0000000000000001 FS: 0000000000000000(0000) GS:ffff888667a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005590102cb078 CR3: 000000000240a003 CR4: 00000000001706f0 Call Trace: ib_register_device.cold.44+0x23e/0x2d0 [ib_core] rvt_register_device+0xfa/0x230 [rdmavt] hfi1_register_ib_device+0x623/0x690 [hfi1] init_one.cold.36+0x2d1/0x49b [hfi1] local_pci_probe+0x45/0x80 work_for_cpu_fn+0x16/0x20 process_one_work+0x1b1/0x360 worker_thread+0x1d4/0x3a0 kthread+0x11a/0x140 ret_from_fork+0x22/0x30 Fixes: 5e2ddd1e5982 ("RDMA/counter: Add optional counter support") Link: https://lore.kernel.org/r/20211115200913.124104.47770.stgit@awfm-01.cornelisnetworks.com Reviewed-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-10-12RDMA/counter: Add a descriptor in struct rdma_hw_statsAharon Landau1-26/+27
Add a counter statistic descriptor structure in rdma_hw_stats. In addition to the counter name, more meta-information will be added. This code extension is needed for optional-counter support in the following patches. Link: https://lore.kernel.org/r/20211008122439.166063-4-markzhang@nvidia.com Signed-off-by: Aharon Landau <aharonl@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Mark Zhang <markzhang@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-08-25RDMA/hfi1: Convert to SPDX identifierCai Huoqing1-43/+1
use SPDX-License-Identifier instead of a verbose license text Link: https://lore.kernel.org/r/20210823042622.109-1-caihuoqing@baidu.com Signed-off-by: Cai Huoqing <caihuoqing@baidu.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-06-16RDMA: Remove rdma_set_device_sysfs_group()Jason Gunthorpe1-3/+1
The driver's device group can be specified as part of the ops structure like the device's port group. No need for the complicated API. Link: https://lore.kernel.org/r/8964785a34fd3a29ff5b6693493f575b717e594d.1623427137.git.leonro@nvidia.com Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-06-16RDMA: Change ops->init_port to ops->port_groupsJason Gunthorpe1-1/+1
init_port was only being used to register sysfs attributes against the port kobject. Now that all users are creating static attribute_group's we can simply set the attribute_group list in the ops and the core code can just handle it directly. This makes all the sysfs management quite straightforward and prevents any driver from abusing the naked port kobject in future because no driver code can access it. Link: https://lore.kernel.org/r/114f68f3d921460eafe14cea5a80ca65d81729c3.1623427137.git.leonro@nvidia.com Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-06-16RDMA: Split the alloc_hw_stats() ops to port and device variantsJason Gunthorpe1-43/+43
This is being used to implement both the port and device global stats, which is causing some confusion in the drivers. For instance EFA and i40iw both seem to be misusing the device stats. Split it into two ops so drivers that don't support one or the other can leave the op NULL'd, making the calling code a little simpler to understand. Link: https://lore.kernel.org/r/1955c154197b2a159adc2dc97266ddc74afe420c.1623427137.git.leonro@nvidia.com Tested-by: Gal Pressman <galpress@amazon.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-03-26RDMA: Support more than 255 rdma portsMark Bloch1-4/+4
Current code uses many different types when dealing with a port of a RDMA device: u8, unsigned int and u32. Switch to u32 to clean up the logic. This allows us to make (at least) the core view consistent and use the same type. Unfortunately not all places can be converted. Many uverbs functions expect port to be u8 so keep those places in order not to break UAPIs. HW/Spec defined values must also not be changed. With the switch to u32 we now can support devices with more than 255 ports. U32_MAX is reserved to make control logic a bit easier to deal with. As a device with U32_MAX ports probably isn't going to happen any time soon this seems like a non issue. When a device with more than 255 ports is created uverbs will report the RDMA device as having 255 ports as this is the max currently supported. The verbs interface is not changed yet because the IBTA spec limits the port size in too many places to be u8 and all applications that relies in verbs won't be able to cope with this change. At this stage, we are extending the interfaces that are using vendor channel solely Once the limitation is lifted mlx5 in switchdev mode will be able to have thousands of SFs created by the device. As the only instance of an RDMA device that reports more than 255 ports will be a representor device and it exposes itself as a RAW Ethernet only device CM/MAD/IPoIB and other ULPs aren't effected by this change and their sysfs/interfaces that are exposes to userspace can remain unchanged. While here cleanup some alignment issues and remove unneeded sanity checks (mainly in rdmavt), Link: https://lore.kernel.org/r/20210301070420.439400-1-leon@kernel.org Signed-off-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-01-28RDMA/hw/hfi1/verbs: Demote non-conforming doc header and fix a misspellingLee Jones1-3/+3
Fixes the following W=1 kernel build warning(s): drivers/infiniband/hw/hfi1/verbs.c:741: warning: Function parameter or member 'qp' not described in 'update_tx_opstats' drivers/infiniband/hw/hfi1/verbs.c:1160: warning: Function parameter or member 'pkey' not described in 'egress_pkey_check' drivers/infiniband/hw/hfi1/verbs.c:1160: warning: Excess function parameter 'bkey' description in 'egress_pkey_check' drivers/infiniband/hw/hfi1/verbs.c:1217: warning: Function parameter or member 'qp' not described in 'get_send_routine' drivers/infiniband/hw/hfi1/verbs.c:1217: warning: Function parameter or member 'ps' not described in 'get_send_routine' Link: https://lore.kernel.org/r/20210126124732.3320971-20-lee.jones@linaro.org Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com> Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com> Cc: Doug Ledford <dledford@redhat.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: linux-rdma@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-09-18RDMA: Fix link active_speed sizeAharon Landau1-1/+1
According to the IB spec active_speed size should be u16 and not u8 as before. Changing it to allow further extensions in offered speeds. Link: https://lore.kernel.org/r/20200917090223.1018224-4-leon@kernel.org Signed-off-by: Aharon Landau <aharonl@mellanox.com> Reviewed-by: Michael Guralnik <michaelgur@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-06-02RDMA: Remove 'max_map_per_fmr'Jason Gunthorpe1-1/+0
Now that FMR support is gone, this attribute can be deleted from all places. Link: https://lore.kernel.org/r/13-v3-f58e6669d5d3+2cf-fmr_removal_jgg@mellanox.com Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-05-21IB/hfi1: Enable the transmit side of the datagram ipoib netdevPiotr Stankiewicz1-0/+2
This patch hooks the transmit side of the datagram netdev with ipoib by setting the rdma_netdev_get_params function for the hfi1 ib_device_ops structue. It also enables the receiving side by adding the AIP capability into the default capabilities. Link: https://lore.kernel.org/r/20200511160712.173205.65700.stgit@awfm-01.aw.intel.com Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Piotr Stankiewicz <piotr.stankiewicz@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-05-21IB/ipoib: Increase ipoib Datagram mode MTU's upper limitKaike Wan1-0/+2
Currently the ipoib UD mtu is restricted to 4K bytes. Remove this limitation so that the IPOIB module can potentially use an MTU (in UD mode) that is bounded by the MTU of the underlying device. A field is added to the ib_port_attr structure to indicate the maximum physical MTU the underlying device supports. Link: https://lore.kernel.org/r/20200511160618.173205.23053.stgit@awfm-01.aw.intel.com Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Sadanand Warrier <sadanand.warrier@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-05-21IB/{rdmavt, hfi1}: Implement creation of accelerated UD QPsGary Leshner1-1/+1
Adds capability to create a qpn to be recognized as an accelerated UD QP for ipoib. This is accomplished by reserving 0x81 in byte[0] of the qpn as the prefix for these qp types and reserving qpns between 0x810000 and 0x81ffff. The hfi1 capability mask already contained a flag for the VNIC netdev. This has been renamed and extended to include both VNIC and ipoib. The rvt code to allocate qps now recognizes this flag and sets 0x81 into byte[0] of the qpn. The code to allocate qpns is modified to reset the qpn numbering when it is detected that a value is located in byte[0] for a UD QP and it is a qpn being requested for net dev use. If it is a regular UD QP then it is allowable to have bits set in byte[0] of the qpn and provide the previously normal behavior. The code to free the qpn now checks for the AIP prefix value of 0x81 and removes it from the qpn before being freed so that the lower 16 bit number can be reused. This patch requires minor changes in the IB core and ipoib to facilitate the creation of accelerated UP QPs. Link: https://lore.kernel.org/r/20200511160607.173205.11757.stgit@awfm-01.aw.intel.com Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Gary Leshner <Gary.S.Leshner@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-05-21IB/hfi1: Remove module parameter for KDETH qpnsGary Leshner1-4/+3
The module parameter for KDETH qpns is being removed in favor of always using the default value of 0x80 as the qpn prefix. Defines have been added for various KDETH values including the prefix of 0x80. The reserved range now starts at the base value for KDETH qpns (0x80) and extends up to and including the last qpn for other reserved QP prefixed types. Adjust other QP prefixed define names to match KDETH defined names. Link: https://lore.kernel.org/r/20200511160600.173205.27508.stgit@awfm-01.aw.intel.com Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Gary Leshner <Gary.S.Leshner@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-03-02IB/hfi1, qib: Ensure RCU is locked when accessing listDennis Dalessandro1-1/+3
The packet handling function, specifically the iteration of the qp list for mad packet processing misses locking RCU before running through the list. Not only is this incorrect, but the list_for_each_entry_rcu() call can not be called with a conditional check for lock dependency. Remedy this by invoking the rcu lock and unlock around the critical section. This brings MAD packet processing in line with what is done for non-MAD packets. Fixes: 7724105686e7 ("IB/hfi1: add driver files") Link: https://lore.kernel.org/r/20200225195445.140896.41873.stgit@awfm-01.aw.intel.com Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-17IB/hfi1: Use a common pad buffer for 9B and 16B packetsMike Marciniszyn1-6/+4
There is no reason for a different pad buffer for the two packet types. Expand the current buffer allocation to allow for both packet types. Fixes: f8195f3b14a0 ("IB/hfi1: Eliminate allocation while atomic") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Kaike Wan <kaike.wan@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Link: https://lore.kernel.org/r/20191004204934.26838.13099.stgit@awfm-01.aw.intel.com Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-09-26IB/hfi1: remove unlikely() from IS_ERR*() conditionDenis Efremov1-1/+1
"unlikely(IS_ERR_OR_NULL(x))" is excessive. IS_ERR_OR_NULL() already uses unlikely() internally. Link: http://lkml.kernel.org/r/20190829165025.15750-8-efremov@linux.com Signed-off-by: Denis Efremov <efremov@linux.com> Cc: Mike Marciniszyn <mike.marciniszyn@intel.com> Cc: Joe Perches <joe@perches.com> Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-08-21Merge branch 'odp_fixes' into rdma.git for-nextJason Gunthorpe1-0/+2
Jason Gunthorpe says: ==================== This is a collection of general cleanups for ODP to clarify some of the flows around umem creation and use of the interval tree. ==================== The branch is based on v5.3-rc5 due to dependencies * odp_fixes: RDMA/mlx5: Use odp instead of mr->umem in pagefault_mr RDMA/mlx5: Use ib_umem_start instead of umem.address RDMA/core: Make invalidate_range a device operation RDMA/odp: Use kvcalloc for the dma_list and page_list RDMA/odp: Check for overflow when computing the umem_odp end RDMA/odp: Provide ib_umem_odp_release() to undo the allocs RDMA/odp: Split creating a umem_odp from ib_umem_get RDMA/odp: Make the three ways to create a umem_odp clear RMDA/odp: Consolidate umem_odp initialization RDMA/odp: Make it clearer when a umem is an implicit ODP umem RDMA/odp: Iterate over the whole rbtree directly RDMA/odp: Use the common interval tree library instead of generic RDMA/mlx5: Fix MR npages calculation for IB_ACCESS_HUGETLB Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-08-01IB/hfi1: Fix Spectre v1 vulnerabilityGustavo A. R. Silva1-0/+2
sl is controlled by user-space, hence leading to a potential exploitation of the Spectre variant 1 vulnerability. Fix this by sanitizing sl before using it to index ibp->sl_to_sc. Notice that given that speculation windows are large, the policy is to kill the speculation on the first load and not worry if it can be completed with a dependent load/store [1]. [1] https://lore.kernel.org/lkml/20180423164740.GY17484@dhcp22.suse.cz/ Cc: stable@vger.kernel.org Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Link: https://lore.kernel.org/r/20190731175428.GA16736@embeddedor Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-07-22IB/hfi1: Do not update hcrc for a KDETH packet during fault injectionKaike Wan1-8/+9
When a KDETH packet is subject to fault injection during transmission, HCRC is supposed to be omitted from the packet so that the hardware on the receiver side would drop the packet. When creating pbc, the PbcInsertHcrc field is set to be PBC_IHCRC_NONE if the KDETH packet is subject to fault injection, but overwritten with PBC_IHCRC_LKDETH when update_hcrc() is called later. This problem is fixed by not calling update_hcrc() when the packet is subject to fault injection. Fixes: 6b6cf9357f78 ("IB/hfi1: Set PbcInsertHcrc for TID RDMA packets") Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20190715164546.74174.99296.stgit@awfm-01.aw.intel.com Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-28Merge tag 'v5.2-rc6' into rdma.git for-nextJason Gunthorpe1-8/+8
For dependencies in next patches. Resolve conflicts: - Use uverbs_get_cleared_udata() with new cq allocation flow - Continue to delete nes despite SPDX conflict - Resolve list appends in mlx5_command_str() - Use u16 for vport_rule stuff - Resolve list appends in struct ib_client Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-17IB/hfi1: Handle port down properly in pioMike Marciniszyn1-2/+2
The call to sc_buffer_alloc currently returns NULL (no buffer) or a buffer descriptor. There is a third case when the port is down. Currently that returns NULL and this prevents the caller from properly handling the sc_buffer_alloc() failure. A verbs code link test after the call is racy so the indication needs to come from the state check inside the allocation routine to be valid. Fix by encoding the ECOMM failure like SDMA. IS_ERR_OR_NULL() tests are added at all call sites. For verbs send, this needs to treat any error by returning a completion without any MMIO copy. Fixes: 7724105686e7 ("IB/hfi1: add driver files") Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-06-17IB/hfi1: Use aborts to trigger RC throttlingMike Marciniszyn1-4/+6
SDMA and pio flushes will cause a lot of packets to be transmitted after a link has gone down, using a lot of CPU to retransmit packets. Fix for RC QPs by recognizing the flush status and: - Forcing a timer start - Putting the QP into a "send one" mode Fixes: 7724105686e7 ("IB/hfi1: add driver files") Reviewed-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-06-10RDMA: Move owner into struct ib_device_opsJason Gunthorpe1-1/+1
This more closely follows how other subsytems work, with owner being a member of the structure containing the function pointers. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-10RDMA: Move driver_id into struct ib_device_opsJason Gunthorpe1-1/+3
No reason for every driver to emit code to set this, just make it part of the driver's existing static const ops structure. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-29IB/{qib, hfi1, rdmavt}: Correct ibv_devinfo max_mr valueMike Marciniszyn1-2/+0
The command 'ibv_devinfo -v' reports 0 for max_mr. Fix by assigning the query values after the mr lkey_table has been built rather than early on in the driver. Fixes: 7b1e2099adc8 ("IB/rdmavt: Move memory registration into rdmavt") Reviewed-by: Josh Collier <josh.d.collier@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-01hfi1: Convert hfi1_unit_table to XArrayMatthew Wilcox1-4/+4
Also remove hfi1_devs_list. Signed-off-by: Matthew Wilcox <willy@infradead.org> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-26IB/hfi1: Add running average for adaptive pioMike Marciniszyn1-3/+4
The adaptive PIO implementation only considers the current packet size when deciding between SDMA and pio for a packet. This causes credit return forces if small and large packets are interleaved. Add a running average to avoid costly credit forces so that a large sequence of small packets is required to go below the threshold that chooses pio. Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-05IB/hfi1: Prioritize the sending of ACK packetsKaike Wan1-0/+1
ACK packets are generally associated with request completion and resource release and therefore should be sent first. This patch optimizes the send engine by using the following policies: (1) QPs with RVT_S_ACK_PENDING bit set in qp->s_flags or qpriv->s_flags should have their priority incremented; (2) QPs with ACK or TID-ACK packet queued should have their priority incremented; (3) When a QP is queued to the wait list due to resource constraints, it will be queued to the head if it has ACK packet to send; (4) When selecting qps to run from the wait list, the one with the highest priority and starve_cnt will be selected; each priority will be equivalent to a fixed number of starve_cnt (16). Reviewed-by: Mitko Haralanov <mitko.haralanov@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-02-05IB/hfi1: Add TID RDMA WRITE functionality into RDMA verbsKaike Wan1-1/+16
This patch integrates TID RDMA WRITE protocol into normal RDMA verbs framework. The TID RDMA WRITE protocol is an end-to-end protocol between the hfi1 drivers on two OPA nodes that converts a qualified RDMA WRITE request into a TID RDMA WRITE request to avoid data copying on the responder side. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-02-05IB/hfi1: Allow for extra entries in QP's s_ack_queueKaike Wan1-1/+1
The TID RDMA WRITE protocol differs from normal IB RDMA WRITE in that TID RDMA WRITE requests do require responses, not just ACKs. Therefore, TID RDMA WRITE requests need to be treated as RDMA READ requests from the point of view of the QPs' s_ack_queue. In other words, the QPs' need to allow for TID RDMA WRITE requests to be stored in their s_ack_queue. However, because the user does not know anything about the TID RDMA capability and/or protocols, these extra entries in the queue cannot be advertized to the user. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-02-05IB/hfi1: Integrate TID RDMA READ protocol into RC protocolKaike Wan1-0/+1
This patch integrates the TID RDMA READ protocol into the IB RC protocol. This protocol is an end-to-end protocol between the hfi1 drivers on two OPA nodes that converts a qualified RDMA READ request into a TID RDMA READ request to avoid data copying on the requester side. The following codes are added in this patch: - Send the TID RDMA READ request; - Complete the TID RDMA READ send request; - Send the TID RDMA READ response; - Complete the TID RDMA READ request; Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-02-05IB/hfi1: Add TID RDMA handlersKaike Wan1-0/+125
This commit adds the TID RDMA READ pointers to the receiving opcode handlers. It also adds TID RDMA READ header sizes to header size table. A function to print the RHF EFLAGS errors is created so that it can be shared by both IB and TID RDMA receiving functions. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-02-05IB/hfi1: Set PbcInsertHcrc for TID RDMA packetsKaike Wan1-2/+19
All TID RDMA packets are in KDETH packet format and therefore the PbcInsertHcrc must be set properly before sending the packet to hardware. Otherwise, the packets will be dropped by the receiver. By default, HCRC is not inserted for 9B packets without KDETH, and this patch adds that back for TID RDMA packets. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-02-05IB/hfi1: TID RDMA RcvArray programming and TID allocationKaike Wan1-10/+19
TID entries are used by hfi1 hardware to receive data payload from incoming packets directly into a user buffer and thus avoid data copying by software. This patch implements the functions for TID allocation, freeing, and programming TID RcvArray entries in hardware for kernel clients. TID entries are managed via lists of TID groups similar to PSM. Furthermore, to track TID resource allocation for each request, software flows are also allocated and freed as needed. Since software flows consume large amount of memory for tracking TID allocation and freeing, it is generally desirable to allocate them dynamically in the send queue and only for TID RDMA requests, but pre-allocate them for receive queue because the send queue could have thousands of entries while the receive queue has only a limited number of entries. Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com> Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-01-31IB/hfi1: Integrate OPFN into RC transactionsKaike Wan1-0/+1
OPFN parameter negotiation allows a pair of connected RC QPs to exchange a set of parameters in succession. This negotiation does not commence till the first ULP request. Because OPFN operations are operations private to the driver, they do not generate user completions or put the QP into error when they run out of retries. This patch integrates the OPFN protocol into the transactions of an RC QP. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-01-31IB/hfi1, IB/rdmavt: Allow for extending of QP's s_ack_queueKaike Wan1-0/+1
The OPFN protocol uses the COMPARE_SWAP request to exchange data between the requester and the responder and therefore needs to be stored in the QP's s_ack_queue when the request is received on the responder side. However, because the user does not know anything about the OPFN protocol, this extra entry in the queue cannot be advertised to the user. This patch adds an extra entry in a QP's s_ack_queue. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-01-30IB/{hfi1,qib}: Cleanup open coded sge sizingMichael J. Ruhl1-10/+2
Sge sizing is done in several places using an open coded method. This can cause maintenance issues. The open coded method is encapsulated in a helper routine. The helper was introduced with commit: 1198fcea8a78 ("IB/hfi1, rdmavt: Move SGE state helper routines into rdmavt") Update all call sites that have the open coded path with the helper routine. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-01-14RDMA: Rename port_callback to init_portParav Pandit1-1/+1
Most provider routines are callback routines which ib core invokes. _callback suffix doesn't convey information about when such callback is invoked. Therefore, rename port_callback to init_port. Additionally, store the init_port function pointer in ib_device_ops, so that it can be accessed in subsequent patches when binding rdma device to net namespace. Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-12-28Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds1-11/+17
Pull rdma updates from Jason Gunthorpe: "This has been a fairly typical cycle, with the usual sorts of driver updates. Several series continue to come through which improve and modernize various parts of the core code, and we finally are starting to get the uAPI command interface cleaned up. - Various driver fixes for bnxt_re, cxgb3/4, hfi1, hns, i40iw, mlx4, mlx5, qib, rxe, usnic - Rework the entire syscall flow for uverbs to be able to run over ioctl(). Finally getting past the historic bad choice to use write() for command execution - More functional coverage with the mlx5 'devx' user API - Start of the HFI1 series for 'TID RDMA' - SRQ support in the hns driver - Support for new IBTA defined 2x lane widths - A big series to consolidate all the driver function pointers into a big struct and have drivers provide a 'static const' version of the struct instead of open coding initialization - New 'advise_mr' uAPI to control device caching/loading of page tables - Support for inline data in SRPT - Modernize how umad uses the driver core and creates cdev's and sysfs files - First steps toward removing 'uobject' from the view of the drivers" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (193 commits) RDMA/srpt: Use kmem_cache_free() instead of kfree() RDMA/mlx5: Signedness bug in UVERBS_HANDLER() IB/uverbs: Signedness bug in UVERBS_HANDLER() IB/mlx5: Allocate the per-port Q counter shared when DEVX is supported IB/umad: Start using dev_groups of class IB/umad: Use class_groups and let core create class file IB/umad: Refactor code to use cdev_device_add() IB/umad: Avoid destroying device while it is accessed IB/umad: Simplify and avoid dynamic allocation of class IB/mlx5: Fix wrong error unwind IB/mlx4: Remove set but not used variable 'pd' RDMA/iwcm: Don't copy past the end of dev_name() string IB/mlx5: Fix long EEH recover time with NVMe offloads IB/mlx5: Simplify netdev unbinding IB/core: Move query port to ioctl RDMA/nldev: Expose port_cap_flags2 IB/core: uverbs copy to struct or zero helper IB/rxe: Reuse code which sets port state IB/rxe: Make counters thread safe IB/mlx5: Use the correct commands for UMEM and UCTX allocation ...
2018-12-11RDMA/hfi1: Initialize ib_device_ops structKamal Heib1-7/+11
Initialize ib_device_ops with the supported operations using ib_set_device_ops(). Signed-off-by: Kamal Heib <kamalheib1@gmail.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-12-06IB/hfi1: Reduce lock contention on iowait_lock for sdma and pioMike Marciniszyn1-4/+3
Commit 4e045572e2c2 ("IB/hfi1: Add unique txwait_lock for txreq events") laid the ground work to support per resource waiting locking. This patch adds that with a lock unique to each sdma engine and pio sendcontext and makes necessary changes for verbs, PSM, and vnic to use the new locks. This is particularly beneficial for smaller messages that will exhaust resources at a faster rate. Fixes: 7724105686e7 ("IB/hfi1: add driver files") Reviewed-by: Gary Leshner <Gary.S.Leshner@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-12-06IB/hfi1: Allow the driver to initialize QP priv structMike Marciniszyn1-0/+1
This patch adds an interface to allow the driver to initialize the QP priv struct when the QP is created and after the qpn has been assigned. A field is added to the QP priv struct to reference the rcd and two new files are added to contain the function to initialize the rcd field so that more TID RDMA related code can be added here later. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-12-06IB/hfi1: Incorrect sizing of sge for PIO will OOPsMichael J. Ruhl1-0/+2
An incorrect sge sizing in the HFI PIO path will cause an OOPs similar to this: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [] hfi1_verbs_send_pio+0x3d8/0x530 [hfi1] PGD 0 Oops: 0000 1 SMP Call Trace: ? hfi1_verbs_send_dma+0xad0/0xad0 [hfi1] hfi1_verbs_send+0xdf/0x250 [hfi1] ? make_rc_ack+0xa80/0xa80 [hfi1] hfi1_do_send+0x192/0x430 [hfi1] hfi1_do_send_from_rvt+0x10/0x20 [hfi1] rvt_post_send+0x369/0x820 [rdmavt] ib_uverbs_post_send+0x317/0x570 [ib_uverbs] ib_uverbs_write+0x26f/0x420 [ib_uverbs] ? security_file_permission+0x21/0xa0 vfs_write+0xbd/0x1e0 ? mntput+0x24/0x40 SyS_write+0x7f/0xe0 system_call_fastpath+0x16/0x1b Fix by adding the missing sizing check to correctly determine the sge length. Fixes: 7724105686e7 ("IB/hfi1: add driver files") Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-12-03IB/hfi1: Fix an out-of-bounds access in get_hw_statsPiotr Stankiewicz1-1/+1
When running with KASAN, the following trace is produced: [ 62.535888] ================================================================== [ 62.544930] BUG: KASAN: slab-out-of-bounds in gut_hw_stats+0x122/0x230 [hfi1] [ 62.553856] Write of size 8 at addr ffff88080e8d6330 by task kworker/0:1/14 [ 62.565333] CPU: 0 PID: 14 Comm: kworker/0:1 Not tainted 4.19.0-test-build-kasan+ #8 [ 62.575087] Hardware name: Intel Corporation S2600KPR/S2600KPR, BIOS SE5C610.86B.01.01.0019.101220160604 10/12/2016 [ 62.587951] Workqueue: events work_for_cpu_fn [ 62.594050] Call Trace: [ 62.598023] dump_stack+0xc6/0x14c [ 62.603089] ? dump_stack_print_info.cold.1+0x2f/0x2f [ 62.610041] ? kmsg_dump_rewind_nolock+0x59/0x59 [ 62.616615] ? get_hw_stats+0x122/0x230 [hfi1] [ 62.622985] print_address_description+0x6c/0x23c [ 62.629744] ? get_hw_stats+0x122/0x230 [hfi1] [ 62.636108] kasan_report.cold.6+0x241/0x308 [ 62.642365] get_hw_stats+0x122/0x230 [hfi1] [ 62.648703] ? hfi1_alloc_rn+0x40/0x40 [hfi1] [ 62.655088] ? __kmalloc+0x110/0x240 [ 62.660695] ? hfi1_alloc_rn+0x40/0x40 [hfi1] [ 62.667142] setup_hw_stats+0xd8/0x430 [ib_core] [ 62.673972] ? show_hfi+0x50/0x50 [hfi1] [ 62.680026] ib_device_register_sysfs+0x165/0x180 [ib_core] [ 62.687995] ib_register_device+0x5a2/0xa10 [ib_core] [ 62.695340] ? show_hfi+0x50/0x50 [hfi1] [ 62.701421] ? ib_unregister_device+0x2e0/0x2e0 [ib_core] [ 62.709222] ? __vmalloc_node_range+0x2d0/0x380 [ 62.716131] ? rvt_driver_mr_init+0x11f/0x2d0 [rdmavt] [ 62.723735] ? vmalloc_node+0x5c/0x70 [ 62.729697] ? rvt_driver_mr_init+0x11f/0x2d0 [rdmavt] [ 62.737347] ? rvt_driver_mr_init+0x1f5/0x2d0 [rdmavt] [ 62.744998] ? __rvt_alloc_mr+0x110/0x110 [rdmavt] [ 62.752315] ? rvt_rc_error+0x140/0x140 [rdmavt] [ 62.759434] ? rvt_vma_open+0x30/0x30 [rdmavt] [ 62.766364] ? mutex_unlock+0x1d/0x40 [ 62.772445] ? kmem_cache_create_usercopy+0x15d/0x230 [ 62.780115] rvt_register_device+0x1f6/0x360 [rdmavt] [ 62.787823] ? rvt_get_port_immutable+0x180/0x180 [rdmavt] [ 62.796058] ? __get_txreq+0x400/0x400 [hfi1] [ 62.802969] ? memcpy+0x34/0x50 [ 62.808611] hfi1_register_ib_device+0xde6/0xeb0 [hfi1] [ 62.816601] ? hfi1_get_npkeys+0x10/0x10 [hfi1] [ 62.823760] ? hfi1_init+0x89f/0x9a0 [hfi1] [ 62.830469] ? hfi1_setup_eagerbufs+0xad0/0xad0 [hfi1] [ 62.838204] ? pcie_capability_clear_and_set_word+0xcd/0xe0 [ 62.846429] ? pcie_capability_read_word+0xd0/0xd0 [ 62.853791] ? hfi1_pcie_init+0x187/0x4b0 [hfi1] [ 62.860958] init_one+0x67f/0xae0 [hfi1] [ 62.867301] ? hfi1_init+0x9a0/0x9a0 [hfi1] [ 62.873876] ? wait_woken+0x130/0x130 [ 62.879860] ? read_word_at_a_time+0xe/0x20 [ 62.886329] ? strscpy+0x14b/0x280 [ 62.891998] ? hfi1_init+0x9a0/0x9a0 [hfi1] [ 62.898405] local_pci_probe+0x70/0xd0 [ 62.904295] ? pci_device_shutdown+0x90/0x90 [ 62.910833] work_for_cpu_fn+0x29/0x40 [ 62.916750] process_one_work+0x584/0x960 [ 62.922974] ? rcu_work_rcufn+0x40/0x40 [ 62.928991] ? __schedule+0x396/0xdc0 [ 62.934806] ? __sched_text_start+0x8/0x8 [ 62.941020] ? pick_next_task_fair+0x68b/0xc60 [ 62.947674] ? run_rebalance_domains+0x260/0x260 [ 62.954471] ? __list_add_valid+0x29/0xa0 [ 62.960607] ? move_linked_works+0x1c7/0x230 [ 62.967077] ? trace_event_raw_event_workqueue_execute_start+0x140/0x140 [ 62.976248] ? mutex_lock+0xa6/0x100 [ 62.982029] ? __mutex_lock_slowpath+0x10/0x10 [ 62.988795] ? __switch_to+0x37a/0x710 [ 62.994731] worker_thread+0x62e/0x9d0 [ 63.000602] ? max_active_store+0xf0/0xf0 [ 63.006828] ? __switch_to_asm+0x40/0x70 [ 63.012932] ? __switch_to_asm+0x34/0x70 [ 63.019013] ? __switch_to_asm+0x40/0x70 [ 63.025042] ? __switch_to_asm+0x34/0x70 [ 63.031030] ? __switch_to_asm+0x40/0x70 [ 63.037006] ? __schedule+0x396/0xdc0 [ 63.042660] ? kmem_cache_alloc_trace+0xf3/0x1f0 [ 63.049323] ? kthread+0x59/0x1d0 [ 63.054594] ? ret_from_fork+0x35/0x40 [ 63.060257] ? __sched_text_start+0x8/0x8 [ 63.066212] ? schedule+0xcf/0x250 [ 63.071529] ? __wake_up_common+0x110/0x350 [ 63.077794] ? __schedule+0xdc0/0xdc0 [ 63.083348] ? wait_woken+0x130/0x130 [ 63.088963] ? finish_task_switch+0x1f1/0x520 [ 63.095258] ? kasan_unpoison_shadow+0x30/0x40 [ 63.101792] ? __init_waitqueue_head+0xa0/0xd0 [ 63.108183] ? replenish_dl_entity.cold.60+0x18/0x18 [ 63.115151] ? _raw_spin_lock_irqsave+0x25/0x50 [ 63.121754] ? max_active_store+0xf0/0xf0 [ 63.127753] kthread+0x1ae/0x1d0 [ 63.132894] ? kthread_bind+0x30/0x30 [ 63.138422] ret_from_fork+0x35/0x40 [ 63.146973] Allocated by task 14: [ 63.152077] kasan_kmalloc+0xbf/0xe0 [ 63.157471] __kmalloc+0x110/0x240 [ 63.162804] init_cntrs+0x34d/0xdf0 [hfi1] [ 63.168883] hfi1_init_dd+0x29a3/0x2f90 [hfi1] [ 63.175244] init_one+0x551/0xae0 [hfi1] [ 63.181065] local_pci_probe+0x70/0xd0 [ 63.186759] work_for_cpu_fn+0x29/0x40 [ 63.192310] process_one_work+0x584/0x960 [ 63.198163] worker_thread+0x62e/0x9d0 [ 63.203843] kthread+0x1ae/0x1d0 [ 63.208874] ret_from_fork+0x35/0x40 [ 63.217203] Freed by task 1: [ 63.221844] __kasan_slab_free+0x12e/0x180 [ 63.227844] kfree+0x92/0x1a0 [ 63.232570] single_release+0x3a/0x60 [ 63.238024] __fput+0x1d9/0x480 [ 63.242911] task_work_run+0x139/0x190 [ 63.248440] exit_to_usermode_loop+0x191/0x1a0 [ 63.254814] do_syscall_64+0x301/0x330 [ 63.260283] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 63.270199] The buggy address belongs to the object at ffff88080e8d5500 which belongs to the cache kmalloc-4096 of size 4096 [ 63.287247] The buggy address is located 3632 bytes inside of 4096-byte region [ffff88080e8d5500, ffff88080e8d6500) [ 63.303564] The buggy address belongs to the page: [ 63.310447] page:ffffea00203a3400 count:1 mapcount:0 mapping:ffff88081380e840 index:0x0 compound_mapcount: 0 [ 63.323102] flags: 0x2fffff80008100(slab|head) [ 63.329775] raw: 002fffff80008100 0000000000000000 0000000100000001 ffff88081380e840 [ 63.340175] raw: 0000000000000000 0000000000070007 00000001ffffffff 0000000000000000 [ 63.350564] page dumped because: kasan: bad access detected [ 63.361974] Memory state around the buggy address: [ 63.369137] ffff88080e8d6200: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 63.379082] ffff88080e8d6280: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 63.389032] >ffff88080e8d6300: 00 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc [ 63.398944] ^ [ 63.406141] ffff88080e8d6380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 63.416109] ffff88080e8d6400: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 63.426099] ================================================================== The trace happens because get_hw_stats() assumes there is room in the memory allocated in init_cntrs() to accommodate the driver counters. Unfortunately, that routine only allocated space for the device counters. Fix by insuring the allocation has room for the additional driver counters. Cc: <Stable@vger.kernel.org> # v4.14+ Fixes: b7481944b06e9 ("IB/hfi1: Show statistics counters under IB stats interface") Reviewed-by: Mike Marciniczyn <mike.marciniszyn@intel.com> Reviewed-by: Mike Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Piotr Stankiewicz <piotr.stankiewicz@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-10-17RDMA/drivers: Use core provided API for registering device attributesParav Pandit1-0/+3
Use rdma_set_device_sysfs_group() to register device attributes and simplify the driver. Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.