| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Replace all the occurrences of FIELD_SIZEOF() with sizeof_field() except
at places where these are defined. Later patches will remove the unused
definition of FIELD_SIZEOF().
This patch is generated using following script:
EXCLUDE_FILES="include/linux/stddef.h|include/linux/kernel.h"
git grep -l -e "\bFIELD_SIZEOF\b" | while read file;
do
if [[ "$file" =~ $EXCLUDE_FILES ]]; then
continue
fi
sed -i -e 's/\bFIELD_SIZEOF\b/sizeof_field/g' $file;
done
Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Link: https://lore.kernel.org/r/20190924105839.110713-3-pankaj.laxminarayan.bharadiya@intel.com
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: David Miller <davem@davemloft.net> # for net
|
|
All users of process_mad() converts input pointers from ib_mad_hdr to be
ib_mad, update the function declaration to use ib_mad directly.
Also remove not used input MAD size parameter.
Link: https://lore.kernel.org/r/20191029062745.7932-17-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Tested-By: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
SDMA and pio flushes will cause a lot of packets to be transmitted
after a link has gone down, using a lot of CPU to retransmit
packets.
Fix for RC QPs by recognizing the flush status and:
- Forcing a timer start
- Putting the QP into a "send one" mode
Fixes: 7724105686e7 ("IB/hfi1: add driver files")
Reviewed-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
The adaptive PIO implementation only considers the current packet size
when deciding between SDMA and pio for a packet.
This causes credit return forces if small and large packets are
interleaved.
Add a running average to avoid costly credit forces so that a large
sequence of small packets is required to go below the threshold that
chooses pio.
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
This patch integrates TID RDMA WRITE protocol into normal RDMA verbs
framework. The TID RDMA WRITE protocol is an end-to-end protocol
between the hfi1 drivers on two OPA nodes that converts a qualified
RDMA WRITE request into a TID RDMA WRITE request to avoid data copying
on the responder side.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
The "Second Leg" of the TID RDMA WRITE protocol deals with
the transfer of data and ack packets, which are in the KDETH
PSN space, as opposed to the IB PSN space.
Therefore, the Second Leg could be considered as a separate
state machine. As such, it is handled by a different work
queue item which is scheduled along with the normal IB state
machine work item.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
To improve performance, the TID RDMA WRITE protocol is designed to
own a second leg to send data and ack packets in the KDETH PSN space.
This patch adds the packet builder for the requester side, which
contains the state machine to build TID RDMA WRITE DATA and TID
RDMA RESYNC packet.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
This patch adds the logic to resend TID RDMA WRITE DATA packets.
The tracking indices will be reset properly so that the correct
TID entries will be used.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
This patch adds the TID RDMA retry timer to make sure that TID RDMA
WRITE DATA packets for a segment are received successfully by the
responder. This timer is generally armed when the last TID RDMA
WRITE DATA packet for a segment is sent out and stopped when all
TID RDMA DATA packets are acknowledged.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
This patch adds a function to receive TID RDMA ACK packet, which could
be an acknowledge to either a TID RDMA WRITE DATA packet or an TID
RDMA RESYNC packet. For an ACK to TID RDMA WRITE DATA packet, the
request segments are completed appropriately. For an ACK to a TID
RDMA RESYNC packet, any pending segment flow information is updated
accordingly.
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
This patch adds a function to build TID RDMA ACJ packet, which is also
in the KDETH PSN space for packet ordering. This packet is used to
acknowledge the receiving of all the TID RDMA WRITE DATA packets
before the given KDETH PSN. Similar to RC ACK packets, TID RDMA ACK
packets could also be coalesced.
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
This patch adds a function to receive TID RDMA WRITE DATA packet,
which is in the KDETH PSN space in packet ordering. Due to the use
of header suppression, software is generally only notified when
the last data packet for a segment is received. This patch also
adds code to handle KDETH EFLAGS errors for ingress TID RDMA WRITE
DATA packets.
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
This patch adds a function to receive TID RDMA WRITE response.
The TID entries will be stored for encoding TID RDMA WRITE DATA
packet later.
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
This patch adds the TID resource timer, which is used by the responder
to free any TID resources that are allocated for TID RDMA WRITE request
and not returned by the requester after a reasonable time.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
This patch adds the function to build TID RDMA WRITE response. The
main role of the TID RDMA WRITE RESP packet is to send TID entries
to the requester so that they can be used to encode TID RDMA WRITE
DATA packet.
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
This patch adds the functions to receive TID RDMA WRITE request. The
request will be stored in the QP's s_ack_queue. This patch also adds
code to handle duplicate TID RDMA WRITE request and a function to
allocate TID resources for data receiving on the responder side.
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
This locking mechanism is designed to provent vavious memory corruption
scenarios from occurring when requests are pipelined, especially when
RDMA READ/WRITE requests are interleaved with TID RDMA READ/WRITE
requests:
1. READ-AFTER-READ;
2. READ-AFTER-WRITE;
3. WRITE-AFTER-READ;
When memory corruption is likely, a request will be held back until
previous requests have been completed.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
This commit adds the TID RDMA READ pointers to the receiving opcode
handlers. It also adds TID RDMA READ header sizes to header size table.
A function to print the RHF EFLAGS errors is created so that it can be
shared by both IB and TID RDMA receiving functions.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
This patch adds the functions to receive TID RDMA READ response. The TID
resource information in the KDETH packet header will direct the hardware
to deliver the packet payload to the user buffer automatically and the
software will handle the packet header for the last packet of a segment
as all other packet headers are suppressed by default. The TID entries
will be freed when all packets for a segment have been received. This
patch also adds the functions to handle KDETH eflag errors, including
flow sequence and generation errors, when a TID RDMA READ response
packet is received . The flow sequence error can be recovered by software
checking of the flow sequence and will disappear when the hardware flow
is programmed with a new generation number.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
This patch adds the functions to receive TID RDMA READ request. The TID
resource information will be stored and tracked. Duplicate request
will also be handled properly.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
This patch adds the helper functions to build the TID RDMA READ request
on the requester side. The key is to allocate TID resources (TID flow
and TID entries) and send the resource information to the responder side
along with the read request. Since the TID resources are limited, each
TID RDMA READ request has to be split into segments with a default
segment size of 256K. A software flow is allocated to track the data
transaction for each segment. The work request opcode, packet opcode, and
packet formats for TID RDMA READ protocol are also defined in this patch.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
This patch adds the counter n_tidwait to count the number of times the
TID resource allocator has to wait for TID resources.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
TID entries are used by hfi1 hardware to receive data payload from
incoming packets directly into a user buffer and thus avoid data copying
by software. This patch implements the functions for TID allocation,
freeing, and programming TID RcvArray entries in hardware for kernel
clients. TID entries are managed via lists of TID groups similar to PSM.
Furthermore, to track TID resource allocation for each request, software
flows are also allocated and freed as needed. Since software flows
consume large amount of memory for tracking TID allocation and freeing,
it is generally desirable to allocate them dynamically in the send queue
and only for TID RDMA requests, but pre-allocate them for receive queue
because the send queue could have thousands of entries while the receive
queue has only a limited number of entries.
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
The hfi1 hardware flow is a hardware flow-control mechanism for a KDETH
data packet that is received on a hfi1 port. It validates the packet by
checking both the generation and sequence. Each QP that uses the TID RDMA
mechanism will allocate a hardware flow from its receiving context for
any incoming KDETH data packets.
This patch implements:
(1) a function to allocate hardware flow
(2) a function to free hardware flow
(3) a function to initialize hardware flow generation for a receiving
context
(4) a wait mechanism if the hardware flow is not available
(4) a function to remove the qp from the wait queue for hardware flow
when the qp is reset or destroyed.
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
This patch adds the OPFN helper functions to initialize, encode, decode,
and reset OPFN parameters for the TID RDMA feature.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
OPFN (Omni Path Feature Negotiation) support discovery allows a RC QP to
announce that it supports OPFN and also discover if OPFN is supported by
the peer QP. OPFN parameter negotiation is skipped unless OPFN support is
first discovered. OPFN support is announced by claiming what was
the reserved bit in dword 1 of OmniPath modified base transport header
in requests and responses.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
This patch adds an interface to allow the driver to initialize the QP priv
struct when the QP is created and after the qpn has been assigned. A
field is added to the QP priv struct to reference the rcd and two new
files are added to contain the function to initialize the rcd field so
that more TID RDMA related code can be added here later.
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Moving send completion code into rdmavt in order to have shared logic
between qib and hfi1 drivers.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Brian Welty <brian.welty@intel.com>
Signed-off-by: Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com>
Signed-off-by: Harish Chegondi <harish.chegondi@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
This patch moves hfi1_copy_sge() into rdmavt for sharing with qib.
This patch also moves all the wss_*() functions into rdmavt as
several wss_*() functions are called from hfi1_copy_sge()
When SGE copy mode is adaptive, cacheless copy may be done in some cases
for performance reasons. In those cases, X86 cacheless copy function
is called since the drivers that use rdmavt and may set SGE copy mode
to adaptive are X86 only. For this reason, this patch adds
"depends on X86_64" to rdmavt/Kconfig.
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Brian Welty <brian.welty@intel.com>
Signed-off-by: Harish Chegondi <harish.chegondi@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Current implementation allows each qp to have only one send engine. As
such, each qp has only one list to queue prebuilt packets when send engine
resources are not available. To improve performance, it is desired to
support multiple send engines for each qp.
This patch creates the framework to support two send engines
(two legs) for each qp for the TID RDMA protocol, which can be easily
extended to support more send engines. It achieves the goal by creating a
leg specific struct, iowait_work in the iowait struct, to hold the
work_struct and the tx_list as well as a pointer to the parent iowait
struct.
The hfi1_pkt_state now has an additional field to record the current legs
work structure and that is now passed to all egress waiters to determine
the leg that needs to wait via a new iowait helper. The APIs are adjusted
to use the new leg specific struct as required.
Many new and modified helpers are added to support this change.
Reviewed-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
The driver-provided function check_send_wqe allows the hardware driver to
check and set up the incoming send wqe before it is inserted into the swqe
ring. This patch will rename it as setup_wqe to better reflect its
usage. In addition, this function is only called when all setup is
complete in rdmavt.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
The post_send() path determines if it should post directly or, schedule
the post for later. The current logic is:
if the swqe ring is empty or (for hfi1) wqe->length <= piothreshold
post the send
else
schedule
This can allow large requests to call the send engine directly. Large
requests can potentially produce a large number of packets prior to
returning to the caller, blocking the caller from posting more requests,
and allowing better parallel processing.
Allow the driver(s) more say in this logic (pass call_send to the driver,
rather than examining a return value).
Update hfi1/qib logic to schedule the send engine if an RC or UC message
is larger than the QP MTU size.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Add 16B Management Packet definition. This optimized packet
format replaces the ib_other_headers and BTH with a source
and destination QP number.
To support these packets we introduce struct opa_16b_mgmt
into the struct hfi1_16b_header.
This packet format is only used for MAD packets using the
IB_OPCODE_UD_SEND_ONLY opcode on QP0/1.
The original 16B implementation failed to use 16B management
packets so now we add their definition.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Moving receive-side WQE allocation logic into rdmavt will allow
further code reuse between qib and hfi1 drivers.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Brian Welty <brian.welty@intel.com>
Signed-off-by: Harish Chegondi <harish.chegondi@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
The packet fault injection code present in the HFI1 driver had some
issues which not only fragment the code but also created user
confusion. Furthermore, it suffered from the following issues:
1. The fault_packet method only worked for received packets. This
meant that the only fault injection mode available for sent
packets is fault_opcode, which did not allow for random packet
drops on all egressing packets.
2. The mask available for the fault_opcode mode did not really work
due to the fact that the opcode values are not bits in a bitmask but
rather sequential integer values. Creating a opcode/mask pair that
would successfully capture a set of packets was nearly impossible.
3. The code was fragmented and used too many debugfs entries to
operate and control. This was confusing to users.
4. It did not allow filtering fault injection on a per direction basis -
egress vs. ingress.
In order to improve or fix the above issues, the following changes have
been made:
1. The fault injection methods have been combined into a single fault
injection facility. As such, the fault injection has been plugged
into both the send and receive code paths. Regardless of method used
the fault injection will operate on both egress and ingress packets.
2. The type of fault injection - by packet or by opcode - is now controlled
by changing the boolean value of the file "opcode_mode". When the value
is set to True, fault injection is done by opcode. Otherwise, by
packet.
2. The masking ability has been removed in favor of a bitmap that holds
opcodes of interest (one bit per opcode, a total of 256 bits). This
works in tandem with the "opcode_mode" value. When the value of
"opcode_mode" is False, this bitmap is ignored. When the value is
True, the bitmap lists all opcodes to be considered for fault injection.
By default, the bitmap is empty. When the user wants to filter by opcode,
the user sets the corresponding bit in the bitmap by echo'ing the bit
position into the 'opcodes' file. This gets around the issue that the set
of opcodes does not lend itself to effective masks and allow for extremely
fine-grained filtering by opcode.
4. fault_packet and fault_opcode methods have been combined. Hence, there
is only one debugfs directory controlling the entire operation of the
fault injection machinery. This reduces the number of debugfs entries
and provides a more unified user experience.
5. A new control files - "direction" - is provided to allow the user to
control the direction of packets, which are subject to fault injection.
6. A new control file - "skip_usec" - is added that would allow the user
to specify a "timeout" during which no fault injection will occur.
In addition, the following bug fixes have been applied:
1. The fault injection code has been split into its own header and source
files. This was done to better organize the code and support conditional
compilation without littering the code with #ifdef's.
2. The method by which the TX PIO packets were being marked for drop
conflicted with the way send contexts were being setup. As a result,
the send context was repeatedly being reset.
3. The fault injection only makes sense when the user can control it
through the debugfs entries. However, a kernel configuration can
enable fault injection but keep fault injection debugfs entries
disabled. Therefore, it makes sense that the HFI fault injection
code depends on both.
4. Error suppression did not take into account the method by which PIO
packets were being dropped. Therefore, even with error suppression
turned on, errors would still be displayed to the screen. A larger
enough packet drop percentage would case the kernel to crash because
the driver would be stuck printing errors.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
These values were introduced as part of the 16B code to
account for the varying size of the LRH between the differing
packet formats.
Replace the blind constants with defines based on FIELD_SIZEOF()
calls.
Fixes: 5b6cabb0db77 ("IB/hfi1: Add 16B RC/UC support")
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
In the receive path, hfi1_ibport is looked up by indexing into an
array. A profile shows this to be expensive. The receive context
data has a pointer to the ibport data, use that pointer instead.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
The packet type comparison used to find out if a packet is a bypass
packet in the hot path is an expensive operation as seen in a profile.
Determine packet's pkey and migration bit through the bypass and 9B
code paths instead.
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
The s_hdrwords variable was used to indicate whether a
packet was already built on a previous iteration of the
send engine. This variable assumed the protection of the
QP's RVT_S_BUSY flag, which was required since the the
QP's s_lock was dropped just prior to the packet being
queued on the one of the egress mechanisms.
Support for multiple send engine instantiations require
that the field not be used due to concurency issues.
The ps.txreq signals the "already built" without the
potential concurency issues.
Fix by getting rid of all s_hdrword usage. A wrapper
is added to test for the already built case that used to
use s_hdrwords.
What used to be stored in s_hdrwords is now in the txreq.
The PBC is not counted, but is added in the pio/sdma code
paths prior to posting the packet.
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Remove HFI1_VERBS_31BIT_PSN Kconfig option leaving only 31-bit PSNs
available. The option was implemented in the early days of the driver
and is no longer needed.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Grzegorz Morys <grzegorz.morys@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
PIO/SDMA send logic now uses the hdr_type field to determine
the type of packet that has been constructed. Based on the hdr_type,
certain things such as PBC flags, padding count and the LT extra
trailing bytes are determined.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Add 16B bypass packet support for RC/UC traffic types.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Increase lid used in hfi1 driver to 32 bits. qib continues
to use 16 bit lids.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Add 16B bypass packet support for UD traffic types.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
When address handle attributes are initialized, the LIDs are
transformed to be in the 32 bit LID space.
When constructing the header, hfi1 driver will look at the LID
to determine the packet header to be created.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Enhance hdr_rcverr() to also handle errors during
16B bypass packet receive.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
We introduce struct hfi1_opa_header as a union
of ib (9B) and 16B headers.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
We introduce a struct hfi1_16b_header to support 16B headers.
16B bypass packets are received by the driver and processed
similar to 9B packets. Add basic support to handle 16B packets.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
When an egress resource(SDMA descriptors, pio credits) is not available,
a sending thread will be put on the resource's wait queue. When the
resource becomes available again, up to a fixed number of sending threads
can be awakened sequentially and removed from the wait queue, depending
on the number of waiting threads and the number of free resources. Since
each awakened sending thread will send as many packets as possible, it
is highly likely that the first sending thread will consume all the
egress resources. Subsequently, it will be put back to the end of the wait
queue. Depending on the timing when the later sending threads wake up,
they may not be able to send any packet and be again put back to the end
of the wait queue sequentially, right behind the first sending thread.
This starvation cycle continues until some sending threads exceed their
retry limit and consequently fail.
This patch fixes the issue by two simple approaches:
(1) Any starved sending thread will be put to the head of the wait queue
while a served sending thread will be put to the tail;
(2) The most starved sending thread will be served first.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
According to IBTA spec a QKey violation should not result in a bad qkey
trap being triggered for UD queue pairs. Also since it is a silent error
we do not increment the q_key violation or the dropped packet counters.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
Pankaj Bharadiya
Leon Romanovsky
Mike Marciniszyn
Kaike Wan
Mitko Haralanov
Venkata Sandeep Dhanalakota
Brian Welty
Dennis Dalessandro
Michael J. Ruhl
Don Hiatt
Sebastian Sanchez
Grzegorz Morys
Dasaratharaman Chandramouli