aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/infiniband/hw/i40iw (follow)
AgeCommit message (Collapse)AuthorFilesLines
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-04i40iw: Fix port number for query QPMustafa Ismail1-0/+2
Port number 0 is an invalid port number. Set it to 1 as there is one port per i40iw device. Fixes: d37498417947 ("i40iw: add files for iwarp interface") Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com> Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-10-04i40iw: Add missing memory barriersMustafa Ismail3-8/+7
Remove duplicate set_64bit_val call to offset 24. Replace some instances of set_64bit_val with i40iw_insert_wqe_hdr as valid bit needs a write barrier and should be the last write operation for the WQE. Fixes: 786c6adb3a94 ("i40iw: add puda code") Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com> Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-09-22i40iw: Add support for port reuse on active side connectionsShiraz Saleem2-76/+78
During OpenMPI scale up testing, we observe rdma_connect failures if ports are reused on multiple connections. This is because the Control Queue-Pair (CQP) command to add the reused port to Accelerated Port Bit VectorTable (APBVT) fails as there already exists an entry. Check for duplicate port before invoking the CQP command to add APBVT entry and delete the entry only if the port is not in use. Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-09-22i40iw: Add missing VLAN priorityMustafa Ismail2-1/+4
Set the VLAN priority which is in the upper 3 bits of the VLAN tag field in the QP context. Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com> Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-09-22i40iw: Call i40iw_cm_disconn on modify QP to disconnectShiraz Saleem1-0/+12
If QP modify to closing/terminate/error fails, connection is not torn down as there is no corresponding asynchronous event that will initiate the teardown. Add explicit call to i40iw_cm_disconn if not waiting in modify QP, otherwise schedule it in CM timer. Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-09-22i40iw: Prevent multiple netdev event notifier registrationsShiraz Saleem3-19/+20
Netdev event notifier registration/de-registration is not synchronized with a lock and there is a possibility of a duplicate registration of notifier before the unregister completes. Register netdev event notifiers during module init and de-register them at module exit. This avoids the need to tie the registration to first netdev client interface open and de-registration to last client interface close and the synchronization to achieve it. This also fixes a crash due to duplicate registration. BUG: unable to handle kernel paging request at ffffffffa0d60388 IP: [<ffffffff8160f75d>] notifier_call_chain+0x3d/0x70 PGD 190d067 PUD 190e063 PMD 76c840067 PTE 0 Oops: 0000 [#1] SMP Modules linked in: i40e(OF-) fuse btrfs zlib_deflate raid6_pq xor vfat msdos [..] e1000e vxlan ip_tunnel ptp pps_core i2c_core video [last unloaded: i40iw] CPU: 1 PID: 27101 Comm: modprobe Tainted: GF W O-------------- 3.10.0-229.el7.x86_64 #1 Hardware name: Gigabyte Technology Co., Ltd. To be filled by O.E.M./Q87M-D2H, BIOS F7 01/17/2014 task: ffff88076e8a96c0 ti: ffff8806959c8000 task.ti: ffff8806959c8000 RIP: 0010:[<ffffffff8160f75d>] [<ffffffff8160f75d>] notifier_call_chain+0x3d/0x70 RSP: 0018:ffff8806959cbb38 EFLAGS: 00010282 RAX: ffffffffa0d60380 RBX: 00000000fffffffd RCX: 0000000000000000 0708] RDX: 0000000000000000 RSI: ffff88081227a000 RDI: 0000000000000002 RBP: ffff8806959cbb60 R08: 0000000000000246 R09: 000000000000700c R10: ffff88080e16ea40 R11: 00000000000ae8df R12: ffffffffa0d60380 R13: 0000000000000002 R14: ffff88076e738800 R15: 0000000000000000 FS: 00007f604ef4a740(0000) GS:ffff88083e240000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffa0d60388 CR3: 0000000753cd2000 CR4: 00000000001407e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Stack: ffffffff819e73a0 0000000000000000 0000000000000002 ffff88076e738800 00000000ffffffff ffff8806959cbba0 ffffffff8109d61d 0000000000000000 0000000000000000 ffff88076e738800 0000000000000000 ffff88076e738800 Call Trace: [<ffffffff8109d61d>] __blocking_notifier_call_chain+0x4d/0x70 [<ffffffff8109d656>] blocking_notifier_call_chain+0x16/0x20 [<ffffffff8156b9e4>] __inet_del_ifa+0x154/0x2b0 [<ffffffff8156d102>] inetdev_event+0x182/0x530 [<ffffffff8160f76c>] notifier_call_chain+0x4c/0x70 [<ffffffff8109d446>] raw_notifier_call_chain+0x16/0x20 [<ffffffff814f71fd>] call_netdevice_notifiers+0x2d/0x60 [<ffffffff814f8845>] rollback_registered_many+0x105/0x220 [<ffffffff814f89a0>] rollback_registered+0x40/0x70 [<ffffffff814f9c88>] unregister_netdevice_queue+0x48/0x80 [<ffffffff814f9cdc>] unregister_netdev+0x1c/0x30 [<ffffffffa0067139>] i40e_vsi_release+0x2a9/0x2b0 [i40e] [<ffffffffa00674e8>] i40e_remove+0x128/0x2b0 [i40e] [<ffffffff813092db>] pci_device_remove+0x3b/0xb0 [<ffffffff813d26ef>] __device_release_driver+0x7f/0xf0 [<ffffffff813d3068>] driver_detach+0xb8/0xc0 [<ffffffff813d22db>] bus_remove_driver+0x9b/0x120 [<ffffffff813d36dc>] driver_unregister+0x2c/0x50 [<ffffffff81307d4c>] pci_unregister_driver+0x2c/0x90 [<ffffffffa008f9d0>] i40e_exit_module+0x10/0x23 [i40e] [<ffffffff810dad0b>] SyS_delete_module+0x16b/0x2d0 [<ffffffff81013b0c>] ? do_notify_resume+0x9c/0xb0 [<ffffffff81613da9>] system_call_fastpath+0x16/0x1b Code: e5 41 57 4d 89 c7 41 56 49 89 d6 41 55 49 89 f5 41 54 53 89 cb 75 14 eb 3d 0f 1f 44 00 00 83 eb 01 74 25 4d 85 e4 74 20 4c 89 e0 <4c> 8b 60 08 4c 89 f2 4c 89 ee 48 89 c7 ff 10 4d 85 ff 74 04 41 RIP [<ffffffff8160f75d>] notifier_call_chain+0x3d/0x70 Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-09-22i40iw: Fail open if there are no available MSI-X vectorsShiraz Saleem1-1/+6
Check number of available MSI-X vectors for i40iw. If there are no available vectors, fail the open. Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-08-28i40iw: make some structures constBhumika Goyal1-3/+3
Make some structures const as they are only used during a copy operation. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-08-24RDMA/i40iw: Remove unused argumentYuval Shaia1-12/+6
None of the calls to i40iw_netdev_vlan_ipv6 are using mac so let's remove it from func's args-list. Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-08-22i40iw: Improve CQP timeout logicShiraz Saleem4-13/+39
The current timeout logic for Control Queue-Pair (CQP) OPs does not take into account whether CQP makes progress but rather blindly waits for a large timeout value, 100000 jiffies for the completion event. Improve this by setting the timeout based on whether the CQP is making progress or not. If the CQP is hung, the timeout will happen sooner, in 5000 jiffies. Each time the CQP progress is detetcted, the timeout extends by 5000 jiffies. Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Christopher N Bednarz <christopher.n.bednarz@intel.com> Signed-off-by: Henry Orosco <henry.orosco@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-08-18Merge branch 'k.o/for-4.13-rc' into k.o/for-nextDoug Ledford5-49/+90
Merging our (hopefully) final -rc pull branch into our for-next branch because some of our pending patches won't apply cleanly without having the -rc patches in our tree. Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-08-18Merge branch 'misc' into k.o/for-nextDoug Ledford3-16/+8
Conflicts: drivers/infiniband/core/iwcm.c - The rdma_netlink patches in HEAD and the iwarp cm workqueue fix (don't use WQ_MEM_RECLAIM, we aren't safe for that context) touched the same code. Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-08-18i40iw: fix spelling mistake: "allloc_buf" -> "alloc_buf"Colin Ian King1-2/+4
Trivial fix to spelling mistake in i40iw_debug message and also split up a couple of lines that are too long and cause checkpatch warnings Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-08-18i40iw: Fixes for static checker warningsShiraz Saleem1-8/+1
Remove NULL check for cm_node->listener in i40iw_accept as listener is always present at this point. Remove the check for cm_node->accept_pend and related code in i40iw_cm_event_connected as the cm_node in this context is only pertinent to active node and cm_node->accept_pend is always 0. This fixes the following smatch warnings, drivers/infiniband/hw/i40iw/i40iw_cm.c:3691 i40iw_accept() error: we previously assumed 'cm_node->listener' could be null drivers/infiniband/hw/i40iw/i40iw_cm.c:4061 i40iw_cm_event_connected() error: we previously assumed 'cm_node->listener' could be null Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-08-18i40iw: Simplify codeChristophe Jaillet1-6/+3
Axe a few lines of code and re-use existing error handling path to avoid code duplication. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-08-16i40iw: Fix potential fcn_id_array out of boundsChristopher N Bednarz1-1/+1
Avoid out of bounds error by utilizing I40IW_MAX_STATS_COUNT instead of I40IW_INVALID_FCN_ID. Signed-off-by: Christopher N Bednarz <christoper.n.bednarz@intel.com> Signed-off-by: Henry Orosco <henry.orosco@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-08-16i40iw: Use correct alignment for CQ0 memoryChristopher N Bednarz1-1/+1
Utilize correct alignment variable when allocating DMA memory for CQ0. Signed-off-by: Christopher N Bednarz <christopher.n.bednarz@intel.com> Signed-off-by: Henry Orosco <henry.orosco@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-08-16i40iw: Fix typecast of tcp_seq_numMustafa Ismail1-1/+1
The typecast of tcp_seq_num incorrectly uses u8. Fix by casting to u32. Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com> Signed-off-by: Henry Orosco <henry.orosco@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-08-16i40iw: Correct variable namesMustafa Ismail2-4/+4
Fix incorrect naming of status code and struct. Use inline instead of immediate. Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com> Signed-off-by: Henry Orosco <henry.orosco@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-08-16i40iw: Fix parsing of query/commit FPM buffersChien Tin Tung2-42/+83
Parsing of commit/query Host Memory Cache Function Private Memory is not skipping over reserved fields and incorrectly assigning those values into object's base/cnt/max_cnt fields. Skip over reserved fields and set correct values. Also correct memory alignment requirement for commit/query FPM buffers. Signed-off-by: Chien Tin Tung <chien.tin.tung@intel.com> Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Christopher N Bednarz <christopher.n.bednarz@intel.com> Signed-off-by: Henry Orosco <henry.orosco@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-08-10RDMA: Simplify get firmware interfaceLeon Romanovsky1-4/+3
There is a need to forward FW version to user space application through RDMA netlink. In order to make it safe, there is need to declare nla_policy and limit the size of FW string. The new define IB_FW_VERSION_NAME_MAX will limit the size of FW version string. That define was chosen to be equal to ETHTOOL_FWVERS_LEN, because many drivers anyway are limited by that value indirectly. The introduction of this define allows us to remove the string size from get_fw_str function signature. Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2017-07-24RDMA: Remove useless MODULE_VERSIONLeon Romanovsky1-1/+0
All modules in drivers/infiniband defined and used MODULE_VERSION, which was pointless because the kernel version describes their state more accurate then those arbitrary numbers. Signed-off-by: Leon Romanovsky <leon@kernel.org> Acked-by: Sagi Grimbrg <sagi@grimberg.me> Reviewed-by: Sagi Grimberg <sagi@grimbeg.me> Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Acked-by: Selvin Xavier <selvin.xavier@broadcom.com> Acked-by: Ram Amrani <Ram.Amrani@cavium.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Acked-by: Adit Ranadive <aditr@vmware.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-20IB/i40iw: Fix error code in i40iw_create_cq()Dan Carpenter1-1/+3
We accidentally forgot to set the error code if ib_copy_from_udata() fails. It means we return ERR_PTR(0) which is NULL and results in a NULL dereference in the callers. Fixes: d37498417947 ("i40iw: add files for iwarp interface") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-20i40iw: Free QP PBLEs when the QP is destroyedTatyana Nikolova2-5/+12
If the physical buffer list entries (PBLEs) of a QP are freed up at i40iw_dereg_mr, they can be assigned to a newly created QP before the previous QP is destroyed. Fix this by freeing PBLEs only when the QP is destroyed. Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com> Signed-off-by: Faisal Latif <faisal.latif@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-20i40iw: Avoid memory leak of CQP request objectsShiraz Saleem3-0/+55
Control Queue Pair (CQP) request objects, which have not received a completion upon interface close, remain in memory. To fix this, identify and free all pending CQP request objects during destroy CQP OP. Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Henry Orosco <henry.orosco@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-20i40iw: Update list correctlyHenry Orosco1-1/+1
To avoid infinite loop, in i40iw_ieq_handle_exception, update plist inside while loop. Signed-off-by: Henry Orosco <henry.orosco@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-20i40iw: Add missing memory barrierHenry Orosco1-0/+3
Add missing write memory barrier before writing the header containing valid bit to the WQE in i40iw_puda_send. Signed-off-by: Henry Orosco <henry.orosco@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-20i40iw: Free QP resources on CQP destroy QP failureShiraz Saleem1-2/+6
Current flow leaves software QP structures in memory if Control Queue Pair (CQP) destroy QP OP fails. To fix this, free QP resources on fail of CQP destroy QP OP. Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Henry Orosco <henry.orosco@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-20i40iw: Release cm_id ref on PCI function resetShiraz Saleem1-1/+4
On PCI function reset, cm_id reference is not released which causes an application hang, as it waits on the cm_id to be released on rdma_destroy. To fix this, call i40iw_cm_disconn during a PCI function reset to clean-up resources and release cm_id reference. Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Henry Orosco <henry.orosco@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-20i40iw: Utilize iwdev->reset during PCI function resetShiraz Saleem1-27/+24
Utilize iwdev->reset on a PCI function reset notification instead of passing in reset flag for resource clean-up. Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Henry Orosco <henry.orosco@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-20i40iw: Do not poll CCQ after it is destroyedMustafa Ismail1-0/+2
Control Queue Pair (CQP) OPs, in this case - Update SDs, cannot poll the Control Completion Queue (CCQ) after CCQ is destroyed. Instead, poll via registers. Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com> Signed-off-by: Henry Orosco <henry.orosco@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-20i40iw: Fix order of cleanup in closeMustafa Ismail1-3/+4
The order for calling i40iw_destroy_pble_pool is incorrect. Also, add PBLE_CHUNK_MEM init state to track pble pool creation and destruction. Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com> Signed-off-by: Henry Orosco <henry.orosco@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-06-20sched/wait: Rename wait_queue_t => wait_queue_entry_tIngo Molnar1-1/+1
Rename: wait_queue_t => wait_queue_entry_t 'wait_queue_t' was always a slight misnomer: its name implies that it's a "queue", but in reality it's a queue *entry*. The 'real' queue is the wait queue head, which had to carry the name. Start sorting this out by renaming it to 'wait_queue_entry_t'. This also allows the real structure name 'struct __wait_queue' to lose its double underscore and become 'struct wait_queue_entry', which is the more canonical nomenclature for such data types. Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-06-01RDMA/i40iw: fix duplicated code for different branchesGustavo A. R. Silva1-4/+1
Refactor code to avoid identical code for different branches. Addresses-Coverity-ID: 1357356 Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Acked-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-06-01RDMA/i40iw: Remove MSS change supportShiraz Saleem4-31/+1
MSS change on active QPs is not supported. Store new MSS value for new QPs only. Remove code to modify MSS on the fly. This also resolves a crash on QP modify to QP 0. BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 IP: i40iw_sc_qp_modify+0x22/0x280 [i40iw] Oops: 0000 [#1] SMP KASAN CPU: 2 PID: 1236 Comm: kworker/u16:4 Not tainted 4.12.0-rc1 #5 Hardware name: Gigabyte Technology Co., Ltd. To be filled by O.E.M./Q87M-D2H, BIOS F7 01/17/2014 Workqueue: l2params i40iw_l2params_worker [i40iw] task: ffff88070f5a9b40 task.stack: ffff88070f5a0000 RIP: 0010:i40iw_sc_qp_modify+0x22/0x280 [i40iw] ... Call Trace: i40iw_exec_cqp_cmd+0x2ce/0x410 [i40iw] ? _raw_spin_lock_irqsave+0x6f/0x80 ? i40iw_process_cqp_cmd+0x1d/0x80 [i40iw] i40iw_process_cqp_cmd+0x7c/0x80 [i40iw] i40iw_handle_cqp_op+0x2f/0x200 [i40iw] ? trace_hardirqs_off+0xd/0x10 ? _raw_spin_unlock_irqrestore+0x46/0x50 i40iw_hw_modify_qp+0x5e/0x90 [i40iw] i40iw_qp_mss_modify+0x52/0x60 [i40iw] i40iw_change_l2params+0x145/0x160 [i40iw] i40iw_l2params_worker+0x1f/0x40 [i40iw] process_one_work+0x1f5/0x650 ? process_one_work+0x161/0x650 worker_thread+0x48/0x3b0 kthread+0x112/0x150 ? process_one_work+0x650/0x650 ? kthread_create_on_node+0x40/0x40 ret_from_fork+0x2e/0x40 Code: 2e 0f 1f 84 00 00 00 00 00 55 48 89 e5 41 56 41 55 41 89 cd 41 54 49 89 fc 53 48 89 f3 48 89 d6 48 83 ec 08 48 8b 87 10 01 00 00 <48> 8b 40 08 4c 8b b0 40 04 00 00 4c 89 f7 e8 1b e5 ff ff 48 85 RIP: i40iw_sc_qp_modify+0x22/0x280 [i40iw] RSP: ffff88070f5a7c28 CR2: 0000000000000008 ---[ end trace 77a405931e296060 ]--- Reported-by: Stefan Assmann <sassmann@redhat.com> Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-06-01RDMA/i40iw: Fix device initialization error pathMustafa Ismail1-7/+13
Some error paths in i40iw_initialize_dev are doing additional and unnecessary work before exiting. Correctly free resources allocated prior to error and return with correct status code. Signed-off-by: Mustafa Ismail <mustafa.ismail@intelcom> Signed-off-by: Henry Orosco <henry.orosco@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-06-01RDMA/i40iw: ACK MPA Reject frameTatyana Nikolova1-1/+1
Explicitly ACK the MPA Reject frame so the peer does not retransmit the frame. Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com> Signed-off-by: Henry Orosco <henry.orosco@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-06-01RDMA/i40iw: Don't set 0-length FULPDU RTR indication control flagTatyana Nikolova1-1/+0
Don't set control flag for 0-length FULPDU (Send) RTR indication in the enhanced MPA Request/Reply frames, because it isn't supported. Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com> Signed-off-by: Henry Orosco <henry.orosco@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-05-01IB/core: Rename struct ib_ah_attr to rdma_ah_attrDasaratharaman Chandramouli1-1/+1
This patch simply renames struct ib_ah_attr to rdma_ah_attr as these fields specify attributes that are not necessarily specific to IB. Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Don Hiatt <don.hiatt@intel.com> Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com> Reviewed-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-04-28IB/i40iw: use setup_timerGeliang Tang2-9/+6
Use setup_timer() instead of init_timer() to simplify the code. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-04-25IB: Replace ib_umem page_size by page_shiftArtemy Kovalyov1-5/+5
Size of pages are held by struct ib_umem in page_size field. It is better to store it as an exponent, because page size by nature is always power-of-two and used as a factor, divisor or ilog2's argument. The conversion of page_size to be page_shift allows to have portable code and avoid following error while compiling on ARM: ERROR: "__aeabi_uldivmod" [drivers/infiniband/core/ib_core.ko] undefined! CC: Selvin Xavier <selvin.xavier@broadcom.com> CC: Steve Wise <swise@chelsio.com> CC: Lijun Ou <oulijun@huawei.com> CC: Shiraz Saleem <shiraz.saleem@intel.com> CC: Adit Ranadive <aditr@vmware.com> CC: Dennis Dalessandro <dennis.dalessandro@intel.com> CC: Ram Amrani <Ram.Amrani@Cavium.com> Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Acked-by: Ram Amrani <Ram.Amrani@cavium.com> Acked-by: Shiraz Saleem <shiraz.saleem@intel.com> Acked-by: Selvin Xavier <selvin.xavier@broadcom.com> Acked-by: Selvin Xavier <selvin.xavier@broadcom.com> Acked-by: Adit Ranadive <aditr@vmware.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-03-24i40iw: Receive netdev events post INET_NOTIFIER stateShiraz Saleem1-0/+8
Netdev notification events are de-registered only when all client iwdev instances are removed. If a single client is closed and re-opened, netdev events could arrive even before the Control Queue-Pair (CQP) is created, causing a NULL pointer dereference crash in i40iw_get_cqp_request. Fix this by allowing netdev event notification only after we have reached the INET_NOTIFIER state with respect to device initialization. Reported-by: Stefan Assmann <sassmann@redhat.com> Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-25Merge tag 'for-next-dma_ops' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdmaLinus Torvalds1-1/+0
Pull rdma DMA mapping updates from Doug Ledford: "Drop IB DMA mapping code and use core DMA code instead. Bart Van Assche noted that the ib DMA mapping code was significantly similar enough to the core DMA mapping code that with a few changes it was possible to remove the IB DMA mapping code entirely and switch the RDMA stack to use the core DMA mapping code. This resulted in a nice set of cleanups, but touched the entire tree and has been kept separate for that reason." * tag 'for-next-dma_ops' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (37 commits) IB/rxe, IB/rdmavt: Use dma_virt_ops instead of duplicating it IB/core: Remove ib_device.dma_device nvme-rdma: Switch from dma_device to dev.parent RDS: net: Switch from dma_device to dev.parent IB/srpt: Modify a debug statement IB/srp: Switch from dma_device to dev.parent IB/iser: Switch from dma_device to dev.parent IB/IPoIB: Switch from dma_device to dev.parent IB/rxe: Switch from dma_device to dev.parent IB/vmw_pvrdma: Switch from dma_device to dev.parent IB/usnic: Switch from dma_device to dev.parent IB/qib: Switch from dma_device to dev.parent IB/qedr: Switch from dma_device to dev.parent IB/ocrdma: Switch from dma_device to dev.parent IB/nes: Remove a superfluous assignment statement IB/mthca: Switch from dma_device to dev.parent IB/mlx5: Switch from dma_device to dev.parent IB/mlx4: Switch from dma_device to dev.parent IB/i40iw: Remove a superfluous assignment statement IB/hns: Switch from dma_device to dev.parent ...
2017-02-23Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdmaLinus Torvalds1-4/+4
Pull Mellanox rdma updates from Doug Ledford: "Mellanox specific updates for 4.11 merge window Because the Mellanox code required being based on a net-next tree, I keept it separate from the remainder of the RDMA stack submission that is based on 4.10-rc3. This branch contains: - Various mlx4 and mlx5 fixes and minor changes - Support for adding a tag match rule to flow specs - Support for cvlan offload operation for raw ethernet QPs - A change to the core IB code to recognize raw eth capabilities and enumerate them (touches non-Mellanox code) - Implicit On-Demand Paging memory registration support" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (40 commits) IB/mlx5: Fix configuration of port capabilities IB/mlx4: Take source GID by index from HW GID table IB/mlx5: Fix blue flame buffer size calculation IB/mlx4: Remove unused variable from function declaration IB: Query ports via the core instead of direct into the driver IB: Add protocol for USNIC IB/mlx4: Support raw packet protocol IB/mlx5: Support raw packet protocol IB/core: Add raw packet protocol IB/mlx5: Add implicit MR support IB/mlx5: Expose MR cache for mlx5_ib IB/mlx5: Add null_mkey access IB/umem: Indicate that process is being terminated IB/umem: Update on demand page (ODP) support IB/core: Add implicit MR flag IB/mlx5: Support creation of a WQ with scatter FCS offload IB/mlx5: Enable QP creation with cvlan offload IB/mlx5: Enable WQ creation and modification with cvlan offload IB/mlx5: Expose vlan offloads capabilities IB/uverbs: Enable QP creation with cvlan offload ...
2017-02-19Merge branch 'k.o/for-4.10-rc' into HEADDoug Ledford1-10/+1
2017-02-14IB: Query ports via the core instead of direct into the driverOr Gerlitz1-4/+4
Change the drivers to call ib_query_port in their get port immutable handler instead of their own query port handler. Doing this required to set the core cap flags of this device before the ib_query_port call is made, since the IB core might need these caps to serve the port query. Drivers are ensured by the IB core that the port attributes passed to the port query verb implementation are zero, and hence we removed the zeroing from the drivers. This patch doesn't add any new functionality. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Acked-by: Adit Ranadive <aditr@vmware.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-01-24i40iw: Set maj_err and min_err in i40iw_sc_cqp_createShiraz Saleem1-0/+3
Set maj_err and min_err in i40iw_sc_cqp_create so that it returns correct values for all return cases. This also addresses an uninitialized variable warning for maj_err and min_err in i40iw_create_cqp. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reported-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-01-24i40iw: fix some indenting in i40iw_sc_vsi_init()Dan Carpenter1-3/+3
The debug printk was indented more than it should have been and we can remove an unnecessary line break. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Shiraz Saleem <shiraz.saleem@intel.com> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-01-24RDMA/core: Add the function ib_mtu_int_to_enumAmrani, Ram1-10/+1
As the functionality to convert the MTU from a number to enum_ib_mtu is ubiquitous, define a dedicated function and remove the duplicated code. Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.