aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/infiniband/hw/ipath/ipath_mad.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2015-08-28IB/ipath: Deprecate ipath driver and move to staging.Dennis Dalessandro1-1521/+0
It is now time for the ipath driver to begin to be phased out of the kernel. This patch moves the ipath driver from the Infiniband sub tree to the staging area where it will remain until the code is removed from the kernel in a few releases. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-14IB/mad: Remove improper use of BUG_ONIra Weiny1-2/+3
We recently added BUG_ON's which were inappropriate for a condition which should never happen. Change these to be WARN_ON_ONCE as a debugging aid. Fixes: 4cd7c9479aff ('IB/mad: Add support for additional MAD info to/from drivers') Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-06-12IB/mad: Add support for additional MAD info to/from driversIra Weiny1-1/+8
In order to support alternate sized MADs (and variable sized MADs on OPA devices) add in/out MAD size parameters to the process_mad core call. In addition, add an out_mad_pkey_index to communicate the pkey index the driver wishes the MAD stack to use when sending OPA MAD responses. The out MAD size and the out MAD PKey index are required by the MAD stack to generate responses on OPA devices. Furthermore, the in and out MAD parameters are made generic by specifying them as ib_mad_hdr rather than ib_mad. Drivers are modified as needed and are protected by BUG_ON flags if the MAD sizes passed to them is incorrect. Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-06-02IB/core cleanup: Add const on args - device->process_madIra Weiny1-4/+4
The process_mad device function declares some parameters as "in". Make those parameters const and adjust the call tree under process_mad in the various drivers accordingly. Signed-off-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Hal Rosenstock <hal@mellanox.com> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2014-08-05IB/ipath: Add P_Key change event supportOr Gerlitz1-4/+10
Deliver P_Key_CHANGE event through the relevant IB device when the local pkey table changes. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-07-18IB/pma: Add include file for IBA performance counters definitionsOr Gerlitz1-165/+33
Move the various definitions and mad structures needed for software implementation of IBA PM agent from the ipath and qib drivers into a single include file, which in turn could be used by more consumers. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.co.il> Signed-off-by: Roland Dreier <roland@purestorage.com>
2009-09-05IB/ipath: strncpy() doesn't always NUL-terminateRoel Kluin1-1/+1
strlcpy() will always null terminate the string. node_desc is not guaranteed to be NUL-terminated so just use memcpy(). Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-01-17IB: Remove __constant_{endian} usesHarvey Harrison1-48/+47
The base versions handle constant folding just fine, use them directly. The replacements are OK in the include/ files as they are not exported to userspace so we don't need the __ prefixed versions. This patch does not affect code generation at all. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-12-05IB/ipath: Add locking for interrupt use of ipath_pd contexts vs freeDave Olson1-0/+2
Fixes timing race resulting in panic. Not a performance sensitive path. Signed-off-by: Dave Olson <dave.olson@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-14IB/ipath: Use IEEE OUI for vendor_id reported by ibv_query_device()Ralph Campbell1-3/+3
The IB spe. for SubnGet(NodeInfo) and query HCA says that the vendor ID field should be the IEEE OUI assigned to the vendor. The ipath driver was returning the PCI vendor ID instead. This will affect applications which call ibv_query_device(). The old value was 0x001fc1 or 0x001077, the new value is 0x001175. The vendor ID doesn't appear to be exported via /sys so that should reduce possible compatibility issues. I'm only aware of Open MPI as a major application which depends on this change, and they have made necessary adjustments. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-06-06IB/ipath: Fix SM trap forwardingRalph Campbell1-0/+4
SM/SMA traps received by the ipath driver should be forwarded to the SM if it is running on the host. The ib_ipath driver was incorrectly replying with "bad method." Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-16IB/ipath: Update copyright dates for files changed in 2008Ralph Campbell1-1/+1
Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-16IB/ipath: Fix time comparison to use time_after_eq()Robert P. J. Day1-1/+2
Raw comparison against jiffies will fail if jiffies wraps, although since ipath currently only supports 64-bit architectures, this is rather far-fetched. Still, it's better to use time_after_eq(). Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-16IB/ipath: Prevent link-recovery code from negating admin disableMichael Albaugh1-0/+4
The link can be put in LINKDOWN_DISABLE state either locally or via a MAD. However, the link-recovery code will take it out of that state as a side-effect of attempts to clear SerDes/XGXS issues. We add a flag to indicate "link is down on purpose, leave it alone." Signed-off-by: Michael Albaugh <michael.albaugh@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-16IB/ipath: Add code to support multiple link speeds and widthsRalph Campbell1-29/+60
This patch adds code to get/set portinfo to support multiple link speeds and widths. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-16IB/ipath: Enable 4KB MTUDave Olson1-7/+5
Enable use of 4KB MTU. Since the driver uses more pinned memory for receive buffers when the 4KB MTU is enabled, whether or not the fabric supports that MTU, add a "mtu4096" module parameter that can be used to limit the MTU to 2KB when it is known that 4KB MTUs can't be used anyway. Signed-off-by: Dave Olson <dave.olson@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-03-11IB/ipath: Fix IB compliance problems with link state vs physical stateRalph Campbell1-4/+3
Subnet manager SetPortinfo messages distingush between changing the link state (DOWN, ARM, ACTIVE) and the link physical state (POLL, SLEEP, DISABLED). These are somewhat independent commands and affect when link width and speed changes take effect. Without this patch, a link DOWN physical state NOP command was causing the link width and speed settings to take effect which should only happen when the link physical state is goes down (either by a SMP or some link physical error like link errors exceeding the threshold). Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-01-25IB/ipath: MAD performance sampling registers supportRalph Campbell1-44/+75
Add support for QLogic HCAs which have hardware performance sampling registers for PortSamplesControl and PortSamplesResult MADs. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-01-25IB/ipath: Enable loopback of DR SMP responses from userspaceRalph Campbell1-2/+2
This patch is in response to reviewing a patch to the core MAD processing which fixes loopback of directed route packets to/from user level MAD agents. This change enables the core code to work for ib_ipath by fixing the return code from the ipath process_mad method. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-09IB/ipath: Remove redundant link state checksRalph Campbell1-6/+0
This patch removes some redundant checks when the SMA changes the link state since the same checks are made in the lower level function that sets the state. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-09IB/ipath: Fix IB_EVENT_PORT_ERR eventRalph Campbell1-10/+0
The link state event calls were being generated when the SM told the SMA to change link states. This works for IB_EVENT_PORT_ACTIVE but not if the link goes down and stays down. The fix is to generate event calls from the interrupt handler when the HW link state changes. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-09IB/ipath: Remove duplicate copy of LMCRalph Campbell1-18/+21
The LMC value was being saved by the SMA in two places. This patch cleans it up so only one copy is kept. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-09IB/ipath: return correct PortGUID in NodeInfoSean Hefty1-1/+1
Return the PortGUID of the correct port when responding to a NodeInfo query. Returning the SystemImageGUID causes issues when there are multiple HCAs in a single system. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-09IB/ipath: Update copyright datesJohn Gregor1-1/+1
Now that it's June, it's about time to update the copyright notices of files that have changed. Signed-off-by: John Gregor <john.gregor@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-09IB/ipath: Fix maximum MTU reportingRobert Walsh1-1/+6
Although our chip supports 4K MTUs, our driver doesn't yet support this feature, so limit the maximum MTU to 2K until we get support for 4K MTUs implemented. Signed-off-by: Robert Walsh <robert.walsh@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-28IB/ipath: Clean up handling of GUID 0Bryan O'Sullivan1-5/+11
Respond with an error to the SM if our GUID is 0, and don't allow the user to set our GUID to 0. Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22IB/ipath: simplify layering codeBryan O'Sullivan1-45/+294
A lot of ipath layer code was only called in one place. Now that the ipath_core and ib_ipath drivers are merged, it's more sensible to simply inline the simple stuff that the layer code was doing. Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-07-01[PATCH] IB/ipath: namespace cleanup: replace ips with ipathBryan O'Sullivan1-3/+3
Remove ips namespace from infinipath drivers. This renames ips_common.h to ipath_common.h. Definitions, data structures, etc. that were not used by kernel modules have moved to user-only headers. All names including ips have been renamed to ipath. Some names have had an ipath prefix added. Signed-off-by: Christian Bell <christian.bell@qlogic.com> Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Cc: "Michael S. Tsirkin" <mst@mellanox.co.il> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-01[PATCH] IB/ipath: purge sps_lid and sps_mlid arraysBryan O'Sullivan1-1/+1
The two arrays only had space for 4 units. Also changed from ipath_set_sps_lid() to ipath_set_lid(); the sps was leftover. Signed-off-by: Dave Olson <dave.olson@qlogic.com> Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Cc: "Michael S. Tsirkin" <mst@mellanox.co.il> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-01[PATCH] IB/ipath: fixes to performance get counters for IB complianceBryan O'Sullivan1-24/+28
This patch fixes some problems uncovered during IB compliance testing to return the right values for error counters returned by the Performance Get Counters packet. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Cc: "Michael S. Tsirkin" <mst@mellanox.co.il> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-01[PATCH] IB/ipath: report correct device identification information in /sysBryan O'Sullivan1-2/+4
Signed-off-by: Robert Walsh <robert.walsh@qlogic.com> Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Cc: "Michael S. Tsirkin" <mst@mellanox.co.il> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-01[PATCH] IB/ipath: update copyrights and other strings to reflect new company nameBryan O'Sullivan1-0/+1
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Cc: "Michael S. Tsirkin" <mst@mellanox.co.il> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-01[PATCH] IB/ipath: name zero counter offsets so it's clear they aren't countersBryan O'Sullivan1-40/+40
Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Cc: "Michael S. Tsirkin" <mst@mellanox.co.il> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-17IB/ipath: Add client reregister event generationRoland Dreier1-1/+1
Generate a client reregister event instead of a LID change event when client reregister bit is set. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-17IB: Move struct port_info from ipath to <rdma/ib_smi.h>Leonid Arsh1-38/+2
Move ipath's struct port_info into <rdma/ib_smi.h>, so that it can be used by mthca to implement client reregister support. Remove the __attribute__((packed)) because all the members of the struct are naturally aligned anyway. Signed-off-by: Leonid Arsh <leonida@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-03-31IB/ipath: misc infiniband code, part 2Bryan O'Sullivan1-0/+1352
Management datagram support, queue pairs, and reliable and unreliable connections. Signed-off-by: Bryan O'Sullivan <bos@pathscale.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.