aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/infiniband/hw/mlx5/flow.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-06-26net/mlx5: Add flow context for flow tagJianbo Liu1-5/+8
Refactor the flow data structures, add new flow_context and move flow_tag into it, as flow_tag doesn't belong to the rule action. Signed-off-by: Jianbo Liu <jianbol@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-04-22RDMA/mlx5: Allow DEVX and raw creation flow on repsMark Bloch1-7/+1
Remove the limitations that were in place and provide support for DEVX and raw flow creation on reps. Signed-off-by: Mark Bloch <markb@mellanox.com> Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-22RDMA/mlx5: Allow inserting a steering rule to the FDBMark Bloch1-12/+63
Allow this only via mlx5 raw create flow API, legacy verbs are not supported. To accommodate that, we add a new attribute to matcher creation to indicate the type of flow table to be used. MLX5_IB_ATTR_FLOW_MATCHER_FT_TYPE With this new attribute MLX5_IB_ATTR_FLOW_MATCHER_FLOW_FLAGS is no longer needed, we keep it for compatibility but at most only a single attribute can be passed of the two. When inserting a flow rule to the FDB we require that a DEVX FT is provided as a destination, no other configuration is allowed. Signed-off-by: Mark Bloch <markb@mellanox.com> Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-10RDMA/mlx5: Move rep into port structMark Bloch1-1/+1
In preparation of moving into a model of single IB device multiple ports move rep to be part of the port structure. We mark a representor device by setting is_rep, no functional change with this patch. Signed-off-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-08IB/mlx5: Remove references to uboject->contextJason Gunthorpe1-7/+6
These should all go through udata now. Add mlx5_udata_to_mdev to convert a udata into the struct mlx5_ib_dev as these call sites require. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-01IB: Pass uverbs_attr_bundle down uobject destroy pathShamir Rabinovitch1-1/+2
Pass uverbs_attr_bundle down the uobject destroy path. The next patch will use this to eliminate the dependecy of the drivers in ib_x->uobject pointers. Signed-off-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-01-25RDMA/mlx5: Fix flow creation on representorsMark Bloch1-2/+1
The intention of the flow_is_supported was to disable the entire tree and methods that allow raw flow creation, but the grammar syntax has this disable the entire UVERBS_FLOW object. Since the method requires a MLX5_IB_OBJECT_FLOW_MATCHER there is no need to do anything, as it is automatically disabled when matchers are disabled. This restores the ability to create flow steering rules on representors via regular verbs. Fixes: a1462351b590 ("RDMA/mlx5: Fail early if user tries to create flows on IB representors") Signed-off-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-12-22RDMA/mlx5: Signedness bug in UVERBS_HANDLER()Dan Carpenter1-1/+1
The "num_actions" variable needs to be signed for the error handling to work. The maximum number of actions is less than 256 so int type is large enough for that. Fixes: cbfdd442c43e ("IB/uverbs: Add helper to get array size from ptr attribute") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-12-18IB/uverbs: Add helper to get array size from ptr attributeMoni Shoua1-7/+5
When the parser of an ioctl command has the knowledge that a ptr attribute in a bundle represents an array of structures, it is useful for it to know the number of elements in the array. This is done by dividing the attribute length with the element size. Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Guy Levi <guyle@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-12-11RDMA/mlx5: Fail early if user tries to create flows on IB representorsLeon Romanovsky1-4/+12
IB representors don't support creation of RAW ethernet QP flows. Disable them by reusing existing RDMA/core support macros. We do it for both creation and matcher because latter is not usable if no flow creation is available. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-12-06IB/mlx5: Enable TX on a DEVX flow tableAlex Vesker1-4/+4
Flow table can be passed as a DEVX object which is a valid destination in an EGRESS flow. Fix the original code to allow that. Fixes: a7ee18bdee83 ("RDMA/mlx5: Allow creating a matcher for a NIC TX flow table") Signed-off-by: Alex Vesker <valex@mellanox.com> Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-11-29RDMA/mlx5: Attach a DEVX counter via raw flow creationMark Bloch1-1/+16
Allow a user to attach a DEVX counter via mlx5 raw flow creation. In order to attach a counter we introduce a new attribute: MLX5_IB_ATTR_CREATE_FLOW_ARR_COUNTERS_DEVX A counter can be attached to multiple flow steering rules. Signed-off-by: Mark Bloch <markb@mellanox.com> Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-11-26RDMA/uverbs: Do not pass ib_uverbs_file to ioctl methodsJason Gunthorpe1-4/+2
The uverbs_attr_bundle already contains this pointer, and most methods don't actually need it. Get rid of the redundant function argument. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2018-11-22RDMA/uverbs: Use a linear list to describe the compiled-in uapiJason Gunthorpe1-13/+7
The 'tree' data structure is very hard to build at compile time, and this makes it very limited. The new radix tree based compiler can handle a more complex input language that does not require the compiler to perfectly group everything into a neat tree structure. Instead use a simple list to describe to input, where the list elements can be of various different 'opcodes' instructing the radix compiler what to do. Start out with opcodes chaining to other definition lists and chaining to the existing 'tree' definition. Replace the very top level of the 'object tree' with this list type and get rid of struct uverbs_object_tree_def and DECLARE_UVERBS_OBJECT_TREE. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2018-10-26Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds1-10/+383
Pull rdma updates from Jason Gunthorpe: "This has been a smaller cycle with many of the commits being smallish code fixes and improvements across the drivers. - Driver updates for bnxt_re, cxgb4, hfi1, hns, mlx5, nes, qedr, and rxe - Memory window support in hns - mlx5 user API 'flow mutate/steering' allows accessing the full packet mangling and matching machinery from user space - Support inter-working with verbs API calls in the 'devx' mlx5 user API, and provide options to use devx with less privilege - Modernize the use of syfs and the device interface to use attribute groups and cdev properly for uverbs, and clean up some of the core code's device list management - More progress on net namespaces for RDMA devices - Consolidate driver BAR mmapping support into core code helpers and rework how RDMA holds poitners to mm_struct for get_user_pages cases - First pass to use 'dev_name' instead of ib_device->name - Device renaming for RDMA devices" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (242 commits) IB/mlx5: Add support for extended atomic operations RDMA/core: Fix comment for hw stats init for port == 0 RDMA/core: Refactor ib_register_device() function RDMA/core: Fix unwinding flow in case of error to register device ib_srp: Remove WARN_ON in srp_terminate_io() IB/mlx5: Allow scatter to CQE without global signaled WRs IB/mlx5: Verify that driver supports user flags IB/mlx5: Support scatter to CQE for DC transport type RDMA/drivers: Use core provided API for registering device attributes RDMA/core: Allow existing drivers to set one sysfs group per device IB/rxe: Remove unnecessary enum values RDMA/umad: Use kernel API to allocate umad indexes RDMA/uverbs: Use kernel API to allocate uverbs indexes RDMA/core: Increase total number of RDMA ports across all devices IB/mlx4: Add port and TID to MAD debug print IB/mlx4: Enable debug print of SMPs RDMA/core: Rename ports_parent to ports_kobj RDMA/core: Do not expose unsupported counters IB/mlx4: Refer to the device kobject instead of ports_parent RDMA/nldev: Allow IB device rename through RDMA netlink ...
2018-10-16RDMA/mlx5: Add support for flow tag to raw create flowMark Bloch1-1/+14
A user can provide a hint which will be attached to the packet and written to the CQE on receive. This can be used as a way to offload operations into the HW, for example parsing a packet which is a tunneled packet, and if so, pass 0x1 as the hint. The software can use that hint to decapsulate the packet and parse only the inner headers thus saving CPU cycles. Signed-off-by: Mark Bloch <markb@mellanox.com> Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-09-11RDMA/mlx5: Allow creating a matcher for a NIC TX flow tableMark Bloch1-5/+29
Currently a matcher can only be created and attached to a NIC RX flow table. Extend it to allow it on NIC TX flow tables as well. In order to achieve that, we: 1) Expose a new attribute: MLX5_IB_ATTR_FLOW_MATCHER_FLOW_FLAGS. enum ib_flow_flags is used as valid flags. Only IB_FLOW_ATTR_FLAGS_EGRESS is supported. 2) Remove the requirement to have a DEVX or QP destination when creating a flow. A flow added to NIC TX flow table will forward the packet outside of the vport (Wire or E-Switch in the SR-iOV case). Signed-off-by: Mark Bloch <markb@mellanox.com> Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-09-11RDMA/mlx5: Add NIC TX namespace when getting a flow tableMark Bloch1-0/+1
Add the ability to get a NIC TX flow table when using _get_flow_table(). This will allow to create a matcher and a flow rule on the NIC TX path. Signed-off-by: Mark Bloch <markb@mellanox.com> Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-09-11RDMA/mlx5: Add flow actions support to raw create flowMark Bloch1-4/+36
Support attaching flow actions to a flow rule via raw create flow. For now only NIC RX path is supported. This change requires to export flow resources management functions so we can maintain proper bookkeeping of flow actions. Signed-off-by: Mark Bloch <markb@mellanox.com> Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-09-11RDMA/mlx5: Refactor raw flow creationMark Bloch1-1/+3
Move struct mlx5_flow_act to be passed from the method entry point, this will allow to add support for flow action for the raw create flow path. Signed-off-by: Mark Bloch <markb@mellanox.com> Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-09-11RDMA/uverbs: Move flow resources initializationMark Bloch1-1/+1
Use ib_set_flow() when initializing flow related resources. Signed-off-by: Mark Bloch <markb@mellanox.com> Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-09-05RDMA/mlx5: Extend packet reformat verbsMark Bloch1-0/+95
We expose new actions: L2_TO_L2_TUNNEL - A generic encap from L2 to L2, the data passed should be the encapsulating headers. L3_TUNNEL_TO_L2 - Will do decap where the inner packet starts from L3, the data should be mac or mac + vlan (14 or 18 bytes). L2_TO_L3_TUNNEL - Will do encap where is L2 of the original packet will not be included, the data should be the encapsulating header. Signed-off-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-09-05RDMA/mlx5: Add new flow action verb - packet reformatMark Bloch1-1/+75
For now, only add L2_TUNNEL_TO_L2 option. This will allow to perform generic decap operation if the encapsulating protocol is L2 based, and the inner packet is also L2 based. For example this can be used to decap VXLAN packets. Signed-off-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-09-05RDMA/uverbs: Add generic function to fill in flow action objectMark Bloch1-5/+3
Refactor the initialization of a flow action object to a common function. Signed-off-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-09-05RDMA/mlx5: Add a new flow action verb - modify headerMark Bloch1-0/+134
Expose the ability to create a flow action which changes packet headers. The data passed from userspace should be modify header actions as defined by HW specification. Signed-off-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-08-01IB/uverbs: Do not pass struct ib_device to the ioctl methodsJason Gunthorpe1-5/+3
This does the same as the patch before, except for ioctl. The rules are the same, but for the ioctl methods the core code handles setting up the uobject. - Retrieve the ib_dev from the uobject->context->device. This is safe under ioctl as the core has already done rdma_alloc_begin_uobject and so CREATE calls are entirely protected by the rwsem. - Retrieve the ib_dev from uobject->object - Call ib_uverbs_get_ucontext() Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-07-24IB/mlx5: Enable driver uapi commands for flow steeringYishai Hadas1-0/+10
Expose the mlx5 flow steering parsing trees, exposing the functionality to user space. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-07-24IB/mlx5: Introduce driver create and destroy flow methodsYishai Hadas1-0/+110
Introduce driver create and destroy flow methods on the uverbs flow object. This allows the driver to get its specific device attributes to match the underlay specification while still using the generic ib_flow object for cleanup and code sharing. The IB object's attributes are set via the ib_set_flow() helper function. The specific implementation for the given specification is added in downstream patches. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-07-24IB/mlx5: Introduce flow steering matcher uapi objectYishai Hadas1-0/+134
Introduce flow steering matcher object and its create and destroy methods. This matcher object holds some mlx5 specific driver properties that matches the underlay device specification when an mlx5 flow steering group is created. It will be used in downstream patches to be part of mlx5 specific create flow method. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.