aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/infiniband/hw/mlx5 (follow)
AgeCommit message (Collapse)AuthorFilesLines
2018-03-19IB/mlx5: Packet packing enhancement for RAW QPBodong Wang3-20/+80
Enable RAW QP to be able to configure burst control by modify_qp. By using burst control with rate limiting, user can achieve best performance and accuracy. The burst control information is passed by user through udata. This patch also reports burst control capability for mlx5 related hardwares, burst control is only marked as supported when both packet_pacing_burst_bound and packet_pacing_typical_size are supported. Signed-off-by: Bodong Wang <bodong@mellanox.com> Reviewed-by: Daniel Jurgens <danielj@mellanox.com> Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-19IB/mlx5: Set the default active rate and width to QDR and 4XHonggang Li1-0/+3
Before commit f1b65df5a232 ("IB/mlx5: Add support for active_width and active_speed in RoCE"), the mlx5_ib driver set the default active_width and active_speed to IB_WIDTH_4X and IB_SPEED_QDR. When the RoCE port is down, the RoCE port does not negotiate the active width with the remote side, causing the active width to be zero. When running userspace ibstat to view the port status, ibstat will panic as it reads an invalid width from sys file. This patch restores the original behavior. Fixes: f1b65df5a232 ("IB/mlx5: Add support for active_width and active_speed in RoCE"). Signed-off-by: Honggang Li <honli@redhat.com> Reviewed-by: Hal Rosenstock <hal@mellanox.com> Reviewed-by: Noa Osherovich <noaos@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-15RDMA/mlx5: Simplify clean and destroy MR callsLeon Romanovsky1-30/+10
The failure to destroy the MRs is printed on mlx5_core layer as error and it makes warning prints useless. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-03-15RDMA/mlx5: Guard ODP specific assignments with specific CONFIGLeon Romanovsky1-0/+4
"live" is needed for ODP only and is better to be guarded by appropriate CONFIG. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-03-15RDMA/mlx5: Unify error flows in rereg MR failure pathsLeon Romanovsky1-14/+18
According to the IBTA spec 1.3, the driver failure in MR reregister shall release old and new MRs. C11-20: If the CI returns any other error, the CI shall invalidate both "old" and "new" registrations, and release any associated resources. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-03-15RDMA/mlx5: Return proper value for not-supported commandLeon Romanovsky1-1/+1
Return -EOPNOTSUPP value to the user for unsupported reg_user_mr. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-03-15RDMA/mlx5: Protect from NULL pointer derefenceLeon Romanovsky1-0/+2
The mlx5_ib_alloc_implicit_mr() can fail to acquire pages and the returned mr pointer won't be valid. Ensure that it is not error prior to access. Cc: <stable@vger.kernel.org> # 4.10 Fixes: 81713d3788d2 ("IB/mlx5: Add implicit MR support") Reported-by: Noa Osherovich <noaos@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-03-14Merge branch 'k.o/wip/dl-for-rc' into k.o/wip/dl-for-nextDoug Ledford7-52/+88
Due to bug fixes found by the syzkaller bot and taken into the for-rc branch after development for the 4.17 merge window had already started being taken into the for-next branch, there were fairly non-trivial merge issues that would need to be resolved between the for-rc branch and the for-next branch. This merge resolves those conflicts and provides a unified base upon which ongoing development for 4.17 can be based. Conflicts: drivers/infiniband/hw/mlx5/main.c - Commit 42cea83f9524 (IB/mlx5: Fix cleanup order on unload) added to for-rc and commit b5ca15ad7e61 (IB/mlx5: Add proper representors support) add as part of the devel cycle both needed to modify the init/de-init functions used by mlx5. To support the new representors, the new functions added by the cleanup patch needed to be made non-static, and the init/de-init list added by the representors patch needed to be modified to match the init/de-init list changes made by the cleanup patch. Updates: drivers/infiniband/hw/mlx5/mlx5_ib.h - Update function prototypes added by representors patch to reflect new function names as changed by cleanup patch drivers/infiniband/hw/mlx5/ib_rep.c - Update init/de-init stage list to match new order from cleanup patch Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-03-14IB/mlx5: Fix cleanup order on unloadMark Bloch2-10/+14
On load we create private CQ/QP/PD in order to be used by UMR, we create those resources after we register ourself as an IB device, and we destroy them after we unregister as an IB device. This was changed by commit 16c1975f1032 ("IB/mlx5: Create profile infrastructure to add and remove stages") which moved the destruction before we unregistration. This allowed to trigger an invalid memory access when unloading mlx5_ib while there are open resources: BUG: unable to handle kernel paging request at 00000001002c012c ... Call Trace: mlx5_ib_post_send_wait+0x75/0x110 [mlx5_ib] __slab_free+0x9a/0x2d0 delay_time_func+0x10/0x10 [mlx5_ib] unreg_umr.isra.15+0x4b/0x50 [mlx5_ib] mlx5_mr_cache_free+0x46/0x150 [mlx5_ib] clean_mr+0xc9/0x190 [mlx5_ib] dereg_mr+0xba/0xf0 [mlx5_ib] ib_dereg_mr+0x13/0x20 [ib_core] remove_commit_idr_uobject+0x16/0x70 [ib_uverbs] uverbs_cleanup_ucontext+0xe8/0x1a0 [ib_uverbs] ib_uverbs_cleanup_ucontext.isra.9+0x19/0x40 [ib_uverbs] ib_uverbs_remove_one+0x162/0x2e0 [ib_uverbs] ib_unregister_device+0xd4/0x190 [ib_core] __mlx5_ib_remove+0x2e/0x40 [mlx5_ib] mlx5_remove_device+0xf5/0x120 [mlx5_core] mlx5_unregister_interface+0x37/0x90 [mlx5_core] mlx5_ib_cleanup+0xc/0x225 [mlx5_ib] SyS_delete_module+0x153/0x230 do_syscall_64+0x62/0x110 entry_SYSCALL_64_after_hwframe+0x21/0x86 ... We restore the original behavior by breaking the UMR stage into two parts, pre and post IB registration stages, this way we can restore the original functionality and maintain clean separation of logic between stages. Fixes: 16c1975f1032 ("IB/mlx5: Create profile infrastructure to add and remove stages") Signed-off-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-03-14IB/mlx5: Maintain a single emergency pageIlya Lesokhin3-22/+37
The mlx5 driver needs to be able to issue invalidation to ODP MRs even if it cannot allocate memory. To this end it preallocates emergency pages to use when the situation arises. This flow should be extremely rare enough, that we don't need to worry about contention and therefore a single emergency page is good enough. Signed-off-by: Ilya Lesokhin <ilyal@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-03-14IB/mlx5: Only synchronize RCU once when removing mkeysDaniel Jurgens1-16/+28
Instead synchronizing RCU in a loop when removing mkeys in a batch do it once at the end before freeing them. The result is only waiting for one RCU grace period instead of many serially. Signed-off-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-03-14RDMA/mlx5: Fix crash while accessing garbage pointer and freed memoryLeon Romanovsky1-4/+8
The failure in rereg_mr flow caused to set garbage value (error value) into mr->umem pointer. This pointer is accessed at the release stage and it causes to the following crash. There is not enough to simply change umem to point to NULL, because the MR struct is needed to be accessed during MR deregistration phase, so delay kfree too. [ 6.237617] BUG: unable to handle kernel NULL pointer dereference a 0000000000000228 [ 6.238756] IP: ib_dereg_mr+0xd/0x30 [ 6.239264] PGD 80000000167eb067 P4D 80000000167eb067 PUD 167f9067 PMD 0 [ 6.240320] Oops: 0000 [#1] SMP PTI [ 6.240782] CPU: 0 PID: 367 Comm: dereg Not tainted 4.16.0-rc1-00029-gc198fafe0453 #183 [ 6.242120] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014 [ 6.244504] RIP: 0010:ib_dereg_mr+0xd/0x30 [ 6.245253] RSP: 0018:ffffaf5d001d7d68 EFLAGS: 00010246 [ 6.246100] RAX: 0000000000000000 RBX: ffff95d4172daf00 RCX: 0000000000000000 [ 6.247414] RDX: 00000000ffffffff RSI: 0000000000000001 RDI: ffff95d41a317600 [ 6.248591] RBP: 0000000000000001 R08: 0000000000000000 R09: 0000000000000000 [ 6.249810] R10: ffff95d417033c10 R11: 0000000000000000 R12: ffff95d4172c3a80 [ 6.251121] R13: ffff95d4172c3720 R14: ffff95d4172c3a98 R15: 00000000ffffffff [ 6.252437] FS: 0000000000000000(0000) GS:ffff95d41fc00000(0000) knlGS:0000000000000000 [ 6.253887] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 6.254814] CR2: 0000000000000228 CR3: 00000000172b4000 CR4: 00000000000006b0 [ 6.255943] Call Trace: [ 6.256368] remove_commit_idr_uobject+0x1b/0x80 [ 6.257118] uverbs_cleanup_ucontext+0xe4/0x190 [ 6.257855] ib_uverbs_cleanup_ucontext.constprop.14+0x19/0x40 [ 6.258857] ib_uverbs_close+0x2a/0x100 [ 6.259494] __fput+0xca/0x1c0 [ 6.259938] task_work_run+0x84/0xa0 [ 6.260519] do_exit+0x312/0xb40 [ 6.261023] ? __do_page_fault+0x24d/0x490 [ 6.261707] do_group_exit+0x3a/0xa0 [ 6.262267] SyS_exit_group+0x10/0x10 [ 6.262802] do_syscall_64+0x75/0x180 [ 6.263391] entry_SYSCALL_64_after_hwframe+0x21/0x86 [ 6.264253] RIP: 0033:0x7f1b39c49488 [ 6.264827] RSP: 002b:00007ffe2de05b68 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7 [ 6.266049] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f1b39c49488 [ 6.267187] RDX: 0000000000000000 RSI: 000000000000003c RDI: 0000000000000000 [ 6.268377] RBP: 00007f1b39f258e0 R08: 00000000000000e7 R09: ffffffffffffff98 [ 6.269640] R10: 00007f1b3a147260 R11: 0000000000000246 R12: 00007f1b39f258e0 [ 6.270783] R13: 00007f1b39f2ac20 R14: 0000000000000000 R15: 0000000000000000 [ 6.271943] Code: 74 07 31 d2 e9 25 d8 6c 00 b8 da ff ff ff c3 0f 1f 44 00 00 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 8b 07 53 48 8b 5f 08 <48> 8b 80 28 02 00 00 e8 f7 d7 6c 00 85 c0 75 04 3e ff 4b 18 5b [ 6.274927] RIP: ib_dereg_mr+0xd/0x30 RSP: ffffaf5d001d7d68 [ 6.275760] CR2: 0000000000000228 [ 6.276200] ---[ end trace a35641f1c474bd20 ]--- Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters") Cc: syzkaller <syzkaller@googlegroups.com> Cc: <stable@vger.kernel.org> Reported-by: Noa Osherovich <noaos@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-03-14RDMA/mlx5: Fix NULL dereference while accessing XRC_TGT QPsLeon Romanovsky1-1/+2
mlx5 modify_qp() relies on FW that the error will be thrown if wrong state is supplied. The missing check in FW causes the following crash while using XRC_TGT QPs. [ 14.769632] BUG: unable to handle kernel NULL pointer dereference at (null) [ 14.771085] IP: mlx5_ib_modify_qp+0xf60/0x13f0 [ 14.771894] PGD 800000001472e067 P4D 800000001472e067 PUD 14529067 PMD 0 [ 14.773126] Oops: 0002 [#1] SMP PTI [ 14.773763] CPU: 0 PID: 365 Comm: ubsan Not tainted 4.16.0-rc1-00038-g8151138c0793 #119 [ 14.775192] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014 [ 14.777522] RIP: 0010:mlx5_ib_modify_qp+0xf60/0x13f0 [ 14.778417] RSP: 0018:ffffbf48001c7bd8 EFLAGS: 00010246 [ 14.779346] RAX: 0000000000000000 RBX: ffff9a8f9447d400 RCX: 0000000000000000 [ 14.780643] RDX: 0000000000000000 RSI: 000000000000000a RDI: 0000000000000000 [ 14.781930] RBP: 0000000000000000 R08: 00000000000217b0 R09: ffffffffbc9c1504 [ 14.783214] R10: fffff4a180519480 R11: ffff9a8f94523600 R12: ffff9a8f9493e240 [ 14.784507] R13: ffff9a8f9447d738 R14: 000000000000050a R15: 0000000000000000 [ 14.785800] FS: 00007f545b466700(0000) GS:ffff9a8f9fc00000(0000) knlGS:0000000000000000 [ 14.787073] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 14.787792] CR2: 0000000000000000 CR3: 00000000144be000 CR4: 00000000000006b0 [ 14.788689] Call Trace: [ 14.789007] _ib_modify_qp+0x71/0x120 [ 14.789475] modify_qp.isra.20+0x207/0x2f0 [ 14.790010] ib_uverbs_modify_qp+0x90/0xe0 [ 14.790532] ib_uverbs_write+0x1d2/0x3c0 [ 14.791049] ? __handle_mm_fault+0x93c/0xe40 [ 14.791644] __vfs_write+0x36/0x180 [ 14.792096] ? handle_mm_fault+0xc1/0x210 [ 14.792601] vfs_write+0xad/0x1e0 [ 14.793018] SyS_write+0x52/0xc0 [ 14.793422] do_syscall_64+0x75/0x180 [ 14.793888] entry_SYSCALL_64_after_hwframe+0x21/0x86 [ 14.794527] RIP: 0033:0x7f545ad76099 [ 14.794975] RSP: 002b:00007ffd78787468 EFLAGS: 00000287 ORIG_RAX: 0000000000000001 [ 14.795958] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f545ad76099 [ 14.797075] RDX: 0000000000000078 RSI: 0000000020009000 RDI: 0000000000000003 [ 14.798140] RBP: 00007ffd78787470 R08: 00007ffd78787480 R09: 00007ffd78787480 [ 14.799207] R10: 00007ffd78787480 R11: 0000000000000287 R12: 00005599ada98760 [ 14.800277] R13: 00007ffd78787560 R14: 0000000000000000 R15: 0000000000000000 [ 14.801341] Code: 4c 8b 1c 24 48 8b 83 70 02 00 00 48 c7 83 cc 02 00 00 00 00 00 00 48 c7 83 24 03 00 00 00 00 00 00 c7 83 2c 03 00 00 00 00 00 00 <c7> 00 00 00 00 00 48 8b 83 70 02 00 00 c7 40 04 00 00 00 00 4c [ 14.804012] RIP: mlx5_ib_modify_qp+0xf60/0x13f0 RSP: ffffbf48001c7bd8 [ 14.804838] CR2: 0000000000000000 [ 14.805288] ---[ end trace 3f1da0df5c8b7c37 ]--- Cc: syzkaller <syzkaller@googlegroups.com> Reported-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-03-13IB/mlx5: Fix integer overflows in mlx5_ib_create_srqBoris Pismenny1-6/+9
This patch validates user provided input to prevent integer overflow due to integer manipulation in the mlx5_ib_create_srq function. Cc: syzkaller <syzkaller@googlegroups.com> Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters") Signed-off-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-03-13IB/mlx5: Fix out-of-bounds read in create_raw_packet_qp_rqBoris Pismenny1-7/+16
Add a check for the length of the qpin structure to prevent out-of-bounds reads BUG: KASAN: slab-out-of-bounds in create_raw_packet_qp+0x114c/0x15e2 Read of size 8192 at addr ffff880066b99290 by task syz-executor3/549 CPU: 3 PID: 549 Comm: syz-executor3 Not tainted 4.15.0-rc2+ #27 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014 Call Trace: dump_stack+0x8d/0xd4 print_address_description+0x73/0x290 kasan_report+0x25c/0x370 ? create_raw_packet_qp+0x114c/0x15e2 memcpy+0x1f/0x50 create_raw_packet_qp+0x114c/0x15e2 ? create_raw_packet_qp_tis.isra.28+0x13d/0x13d ? lock_acquire+0x370/0x370 create_qp_common+0x2245/0x3b50 ? destroy_qp_user.isra.47+0x100/0x100 ? kasan_kmalloc+0x13d/0x170 ? sched_clock_cpu+0x18/0x180 ? fs_reclaim_acquire.part.15+0x5/0x30 ? __lock_acquire+0xa11/0x1da0 ? sched_clock_cpu+0x18/0x180 ? kmem_cache_alloc_trace+0x17e/0x310 ? mlx5_ib_create_qp+0x30e/0x17b0 mlx5_ib_create_qp+0x33d/0x17b0 ? sched_clock_cpu+0x18/0x180 ? create_qp_common+0x3b50/0x3b50 ? lock_acquire+0x370/0x370 ? __radix_tree_lookup+0x180/0x220 ? uverbs_try_lock_object+0x68/0xc0 ? rdma_lookup_get_uobject+0x114/0x240 create_qp.isra.5+0xce4/0x1e20 ? ib_uverbs_ex_create_cq_cb+0xa0/0xa0 ? copy_ah_attr_from_uverbs.isra.2+0xa00/0xa00 ? ib_uverbs_cq_event_handler+0x160/0x160 ? __might_fault+0x17c/0x1c0 ib_uverbs_create_qp+0x21b/0x2a0 ? ib_uverbs_destroy_cq+0x2e0/0x2e0 ib_uverbs_write+0x55a/0xad0 ? ib_uverbs_destroy_cq+0x2e0/0x2e0 ? ib_uverbs_destroy_cq+0x2e0/0x2e0 ? ib_uverbs_open+0x760/0x760 ? futex_wake+0x147/0x410 ? check_prev_add+0x1680/0x1680 ? do_futex+0x3d3/0xa60 ? sched_clock_cpu+0x18/0x180 __vfs_write+0xf7/0x5c0 ? ib_uverbs_open+0x760/0x760 ? kernel_read+0x110/0x110 ? lock_acquire+0x370/0x370 ? __fget+0x264/0x3b0 vfs_write+0x18a/0x460 SyS_write+0xc7/0x1a0 ? SyS_read+0x1a0/0x1a0 ? trace_hardirqs_on_thunk+0x1a/0x1c entry_SYSCALL_64_fastpath+0x18/0x85 RIP: 0033:0x4477b9 RSP: 002b:00007f1822cadc18 EFLAGS: 00000292 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000005 RCX: 00000000004477b9 RDX: 0000000000000070 RSI: 000000002000a000 RDI: 0000000000000005 RBP: 0000000000708000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000292 R12: 00000000ffffffff R13: 0000000000005d70 R14: 00000000006e6e30 R15: 0000000020010ff0 Allocated by task 549: __kmalloc+0x15e/0x340 kvmalloc_node+0xa1/0xd0 create_user_qp.isra.46+0xd42/0x1610 create_qp_common+0x2e63/0x3b50 mlx5_ib_create_qp+0x33d/0x17b0 create_qp.isra.5+0xce4/0x1e20 ib_uverbs_create_qp+0x21b/0x2a0 ib_uverbs_write+0x55a/0xad0 __vfs_write+0xf7/0x5c0 vfs_write+0x18a/0x460 SyS_write+0xc7/0x1a0 entry_SYSCALL_64_fastpath+0x18/0x85 Freed by task 368: kfree+0xeb/0x2f0 kernfs_fop_release+0x140/0x180 __fput+0x266/0x700 task_work_run+0x104/0x180 exit_to_usermode_loop+0xf7/0x110 syscall_return_slowpath+0x298/0x370 entry_SYSCALL_64_fastpath+0x83/0x85 The buggy address belongs to the object at ffff880066b99180 which belongs to the cache kmalloc-512 of size 512 The buggy address is located 272 bytes inside of 512-byte region [ffff880066b99180, ffff880066b99380) The buggy address belongs to the page: page:000000006040eedd count:1 mapcount:0 mapping: (null) index:0x0 compound_mapcount: 0 flags: 0x4000000000008100(slab|head) raw: 4000000000008100 0000000000000000 0000000000000000 0000000180190019 raw: ffffea00019a7500 0000000b0000000b ffff88006c403080 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff880066b99180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff880066b99200: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffff880066b99280: 00 00 fc fc fc fc fc fc fc fc fc fc fc fc fc fc ^ ffff880066b99300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff880066b99380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc Cc: syzkaller <syzkaller@googlegroups.com> Fixes: 0fb2ed66a14c ("IB/mlx5: Add create and destroy functionality for Raw Packet QP") Signed-off-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-03-09RDMA/mlx5: Fix integer overflow while resizing CQLeon Romanovsky1-1/+6
The user can provide very large cqe_size which will cause to integer overflow as it can be seen in the following UBSAN warning: ======================================================================= UBSAN: Undefined behaviour in drivers/infiniband/hw/mlx5/cq.c:1192:53 signed integer overflow: 64870 * 65536 cannot be represented in type 'int' CPU: 0 PID: 267 Comm: syzkaller605279 Not tainted 4.15.0+ #90 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014 Call Trace: dump_stack+0xde/0x164 ? dma_virt_map_sg+0x22c/0x22c ubsan_epilogue+0xe/0x81 handle_overflow+0x1f3/0x251 ? __ubsan_handle_negate_overflow+0x19b/0x19b ? lock_acquire+0x440/0x440 mlx5_ib_resize_cq+0x17e7/0x1e40 ? cyc2ns_read_end+0x10/0x10 ? native_read_msr_safe+0x6c/0x9b ? cyc2ns_read_end+0x10/0x10 ? mlx5_ib_modify_cq+0x220/0x220 ? sched_clock_cpu+0x18/0x200 ? lookup_get_idr_uobject+0x200/0x200 ? rdma_lookup_get_uobject+0x145/0x2f0 ib_uverbs_resize_cq+0x207/0x3e0 ? ib_uverbs_ex_create_cq+0x250/0x250 ib_uverbs_write+0x7f9/0xef0 ? cyc2ns_read_end+0x10/0x10 ? print_irqtrace_events+0x280/0x280 ? ib_uverbs_ex_create_cq+0x250/0x250 ? uverbs_devnode+0x110/0x110 ? sched_clock_cpu+0x18/0x200 ? do_raw_spin_trylock+0x100/0x100 ? __lru_cache_add+0x16e/0x290 __vfs_write+0x10d/0x700 ? uverbs_devnode+0x110/0x110 ? kernel_read+0x170/0x170 ? sched_clock_cpu+0x18/0x200 ? security_file_permission+0x93/0x260 vfs_write+0x1b0/0x550 SyS_write+0xc7/0x1a0 ? SyS_read+0x1a0/0x1a0 ? trace_hardirqs_on_thunk+0x1a/0x1c entry_SYSCALL_64_fastpath+0x1e/0x8b RIP: 0033:0x433549 RSP: 002b:00007ffe63bd1ea8 EFLAGS: 00000217 ======================================================================= Cc: syzkaller <syzkaller@googlegroups.com> Cc: <stable@vger.kernel.org> # 3.13 Fixes: bde51583f49b ("IB/mlx5: Add support for resize CQ") Reported-by: Noa Osherovich <noaos@mellanox.com> Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-03-09Revert "RDMA/mlx5: Fix integer overflow while resizing CQ"Doug Ledford1-6/+1
The original commit of this patch has a munged log message that is missing several of the tags the original author intended to be on the patch. This was due to patchworks misinterpreting a cut-n-paste separator line as an end of message line and munging the mbox that was used to import the patch: https://patchwork.kernel.org/patch/10264089/ The original patch will be reapplied with a fixed commit message so the proper tags are applied. This reverts commit aa0de36a40f446f5a21a7c1e677b98206e242edb. Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-03-07Merge tag 'mlx5-updates-2018-02-28-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux into k.o/wip/dl-for-nextDoug Ledford2-21/+12
mlx5-updates-2018-02-28-1 (IPSec-1) This series consists of some fixes and refactors for the mlx5 drivers, especially around the FPGA and flow steering. Most of them are trivial fixes and are the foundation of allowing IPSec acceleration from user-space. We use flow steering abstraction in order to accelerate IPSec packets. When a user creates a steering rule, [s]he states that we'll carry an encrypt/decrypt flow action (using a specific configuration) for every packet which conforms to a certain match. Since currently offloading these packets is done via FPGA, we'll add another set of flow steering ops. These ops will execute the required FPGA commands and then call the standard steering ops. In order to achieve this, we need that the commands will get all the required information. Therefore, we pass the fte object and embed the flow_action struct inside the fte. In addition, we add the shim layer that will later be used for alternating between the standard and the FPGA steering commands. Some fixes, like " net/mlx5e: Wait for FPGA command responses with a timeout" are very relevant for user-space applications, as these applications could be killed, but we still want to wait for the FPGA and update the kernel's database. Regards, Aviad and Matan Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-03-07RDMA/mlx5: Fix integer overflow while resizing CQLeon Romanovsky1-1/+6
The user can provide very large cqe_size which will cause to integer overflow as it can be seen in the following UBSAN warning: Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-03-06{net,IB}/mlx5: Add flow steering helpersBoris Pismenny1-4/+3
Add helper functions that check if a protocol is part of a flow steering match criteria. Signed-off-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Aviad Yehezkel <aviadye@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-03-06{net,IB}/mlx5: Add has_tag to mlx5_flow_actMatan Barak1-1/+2
The has_tag member will indicate whether a tag action was specified in flow specification. A flow tag 0 = MLX5_FS_DEFAULT_FLOW_TAG is assumed a valid flow tag that is currently used by mlx5 RDMA driver, whereas in HW flow_tag = 0 means that the user doesn't care about flow_tag. HW always provide a flow_tag = 0 if all flow tags requested on a specific flow are 0. So we need a way (in the driver) to differentiate between a user really requesting flow_tag = 0 and a user who does not care, in order to be able to report conflicting flow tags on a specific flow. Signed-off-by: Matan Barak <matanb@mellanox.com> Reviewed-by: Aviad Yehezkel <aviadye@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-03-06IB/mlx5: Pass mlx5_flow_act struct instead of multiple argumentsBoris Pismenny1-12/+8
Group and pass all function arguments of parse_flow_attr call in one common struct mlx5_flow_act. This patch passes all the action arguments of parse_flow_attr in one common struct mlx5_flow_act. It allows us to scale the number of actions without adding new arguments to the function. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Acked-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-06IB/mlx5: Removed not used parametersAviad Yehezkel2-5/+0
Signed-off-by: Aviad Yehezkel <aviadye@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Acked-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-06IB/mlx5: Fix an error code in __mlx5_ib_modify_qp()Dan Carpenter1-1/+3
"err" is either zero or possibly uninitialized here. It should be -EINVAL. Fixes: 427c1e7bcd7e ("{IB, net}/mlx5: Move the modify QP operation table to mlx5_ib") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-06IB/mlx5: When not in dual port RoCE mode, use provided port as nativeMark Bloch1-3/+7
The series that introduced dual port RoCE mode assumed that we don't have a dual port HCA that use the mlx5 driver, this is not the case for Connect-IB HCAs. This reasoning led to assigning 1 as the native port index which causes issue when the second port is used. For example query_pkey() when called on the second port will return values of the first port. Make sure that we assign the right port index as the native port index. Fixes: 32f69e4be269 ("{net, IB}/mlx5: Manage port association for multiport RoCE") Reviewed-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-02-28RDMA/mlx5: Refactor QP type check to be as early as possibleLeon Romanovsky1-12/+6
Perform QP type check in one place and fail as early as possible. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-02-28IB/mlx: Set slid to zero in Ethernet completion structMoni Shoua1-1/+2
IB spec says that a lid should be ignored when link layer is Ethernet, for example when building or parsing a CM request message (CA17-34). However, since ib_lid_be16() and ib_lid_cpu16() validates the slid, not only when link layer is IB, we set the slid to zero to prevent false warnings in the kernel log. Fixes: 62ede7779904 ("Add OPA extended LID support") Reviewed-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-02-28{net, IB}/mlx5: Raise fatal IB event when sys error occursDaniel Jurgens1-9/+2
All other mlx5_events report the port number as 1 based, which is how FW reports it in the port event EQE. Reporting 0 for this event causes mlx5_ib to not raise a fatal event notification to registered clients due to a seemingly invalid port. All switch cases in mlx5_ib_event that go through the port check are supposed to set the port now, so just do it once at variable declaration. Fixes: 89d44f0a6c73("net/mlx5_core: Add pci error handlers to mlx5_core driver") Reviewed-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-02-28IB/mlx5: Avoid passing an invalid QP type to firmwareNoa Osherovich1-1/+6
During QP creation, the mlx5 driver translates the QP type to an internal value which is passed on to FW. There was no check to make sure that the translated value is valid, and -EINVAL was coerced into the mailbox command. Current firmware refuses this as an invalid QP type, but future/past firmware may do something else. Fixes: 09a7d9eca1a6c ('{net,IB}/mlx5: QP/XRCD commands via mlx5 ifc') Reviewed-by: Ilya Lesokhin <ilyal@mellanox.com> Signed-off-by: Noa Osherovich <noaos@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-02-28IB/mlx5: Fix incorrect size of klms in the memory regionSergey Gorenko1-1/+1
The value of mr->ndescs greater than mr->max_descs is set in the function mlx5_ib_sg_to_klms() if sg_nents is greater than mr->max_descs. This is an invalid value and it causes the following error when registering mr: mlx5_0:dump_cqe:276:(pid 193): dump error cqe 00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00000030: 00 00 00 00 0f 00 78 06 25 00 00 8b 08 1e 8f d3 Cc: <stable@vger.kernel.org> # 4.5 Fixes: b005d3164713 ("mlx5: Add arbitrary sg list support") Signed-off-by: Sergey Gorenko <sergeygo@mellanox.com> Tested-by: Laurence Oberman <loberman@redhat.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-02-23IB/mlx5: Disable self loopback check when in switchdev modeMark Bloch1-0/+8
When in switchdev mode, there is no need to do self loopback checks as we can't receive those packets, we insert steering rules to the eswitch that make sure packets can't be looped back. Signed-off-by: Mark Bloch <markb@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-02-23IB/mlx5: Add proper representors supportMark Bloch4-30/+192
This commit adds full support for IB representor: 1) Representors profile, We add two new profiles: nic_rep_profile - This profile will be used to create an IB device that represents the PF/UPLINK. rep_profile - This profile will be used to create an IB device that represents VFs. Each VF will be its own representor. 2) Proper load/unload callbacks, Those are called by the E-Switch when moving to/from switchdev mode. 3) Different flow DB handling for when we in switchdev mode. Signed-off-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-02-23IB/mlx5: E-Switch, Add rule to forward traffic to vportMark Bloch4-0/+45
In order to forward traffic from representor's SQ to the right virtual function, every time an SQ is created also add the corresponding flow rule to the FDB. Signed-off-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-02-23IB/mlx5: Don't expose MR cache in switchdev modeMark Bloch1-2/+3
When enabling many VFs and switching to switchdev mode, the total amount of mkeys we try to allocate when loading representors is very large and may cause timeouts on allocations, the same issues was observed on VFs and we employ the same fix that was done for them. We avoid allocating the full MR cache on load but still allow it to be manipulated once the IB device is loaded. Signed-off-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-02-23IB/mlx5: When in switchdev mode, expose only raw packet capabilitiesMark Bloch2-30/+124
Currently in switchdev mode we allow only for raw packet QPs. Expose the right capabilities and set the gid table length to 0, also make sure we don't try to enable RoCE, so split the function to enable RoCE so representors can enable only the notifier needed for net device events. Signed-off-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-02-23IB/mlx5: Listen to netdev register/unresiter events in switchdev modeMark Bloch2-3/+20
Currently we listen to netdev register/unregister event based on PCI device. When in switchdev mode PF and representors share the same PCI device, so in order to pair ib device and netdev in switchdev mode compare the netdev that triggered the event to that of the representor. Expose a function that lets you receive the netdev associated what a given representor. Signed-off-by: Mark Bloch <markb@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-02-23IB/mlx5: Add match on vport when in switchdev modeMark Bloch1-0/+12
When we point to a representor, it means we are in switchdev mode. The flow db is shared between PF and virtual function representors so each rule created needs to have a match on its specific source port. Signed-off-by: Mark Bloch <markb@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-02-23IB/mlx5: Allocate flow DB only on PF IB deviceMark Bloch2-14/+34
A flow DB is a shared resource between PF and representors, need to allocate it only when creating the PF IB device. Once we add IB representors, they will use the flow db which was created by the PF. Signed-off-by: Mark Bloch <markb@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-02-23IB/mlx5: Add basic regiser/unregister representors codeMark Bloch5-0/+169
Create the basic infrastructure of registering and unregistering IB representors. The load/unload callbacks are left empty and proper implementation will be introduced in following patches. Signed-off-by: Mark Bloch <markb@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-02-15IB/mlx5: Implement fragmented completion queue (CQ)Yonatan Cohen2-28/+42
The current implementation of create CQ requires contiguous memory, such requirement is problematic once the memory is fragmented or the system is low in memory, it causes for failures in dma_zalloc_coherent(). This patch implements new scheme of fragmented CQ to overcome this issue by introducing new type: 'struct mlx5_frag_buf_ctrl' to allocate fragmented buffers, rather than contiguous ones. Base the Completion Queues (CQs) on this new fragmented buffer. It fixes following crashes: kworker/29:0: page allocation failure: order:6, mode:0x80d0 CPU: 29 PID: 8374 Comm: kworker/29:0 Tainted: G OE 3.10.0 Workqueue: ib_cm cm_work_handler [ib_cm] Call Trace: [<>] dump_stack+0x19/0x1b [<>] warn_alloc_failed+0x110/0x180 [<>] __alloc_pages_slowpath+0x6b7/0x725 [<>] __alloc_pages_nodemask+0x405/0x420 [<>] dma_generic_alloc_coherent+0x8f/0x140 [<>] x86_swiotlb_alloc_coherent+0x21/0x50 [<>] mlx5_dma_zalloc_coherent_node+0xad/0x110 [mlx5_core] [<>] ? mlx5_db_alloc_node+0x69/0x1b0 [mlx5_core] [<>] mlx5_buf_alloc_node+0x3e/0xa0 [mlx5_core] [<>] mlx5_buf_alloc+0x14/0x20 [mlx5_core] [<>] create_cq_kernel+0x90/0x1f0 [mlx5_ib] [<>] mlx5_ib_create_cq+0x3b0/0x4e0 [mlx5_ib] Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-01-30Merge tag v4.15 of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.gitJason Gunthorpe2-7/+9
To resolve conflicts in: drivers/infiniband/hw/mlx5/main.c drivers/infiniband/hw/mlx5/qp.c From patches merged into the -rc cycle. The conflict resolution matches what linux-next has been carrying. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-01-29RDMA: Move enum ib_cq_creation_flags to uapi headersJason Gunthorpe2-3/+3
The flags field the enum is used with comes directly from the uapi so it belongs in the uapi headers for clarity and so userspace can use it. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-01-28RDMA/mlx5: Avoid memory leak in case of XRCD dealloc failureLeon Romanovsky1-4/+1
Failure in XRCD FW deallocation command leaves memory leaked and returns error to the user which he can't do anything about it. This patch changes behavior to always free memory and always return success to the user. Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters") Reviewed-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-01-19RDMA/mlx5: Remove redundant allocation warning printLeon Romanovsky1-11/+8
The kmalloc() failure to allocate memory generates enough information and doesn't need to be accompanied by another driver print. Fixes: d69a24e03659 ("IB/mlx5: Move IB event processing onto a workqueue") Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-01-18IB/mlx5: Mmap the HCA's clock info to user-spaceFeras Daoud2-12/+42
This patch maps the new page to user space applications to allow converting a user space completion timestamp to system wall time at the lowest possible latency cost. By using a versioning scheme we allow compatibility between current and future userspace libraries. The change moves mlx5_ib_mmap_cmd enum from mlx5_ib.h to the abi header file mlx5-abi.h. Reviewed-by: Alex Vesker <valex@mellanox.com> Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Feras Daoud <ferasda@mellanox.com> Signed-off-by: Eitan Rabin <rabin@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-01-16Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds1-4/+3
Pull rdma fixes from Doug Ledford: "We had a few more items creep up over the last week. Given we are in -rc8, these are obviously limited to bugs that have a big downside and for which we are certain of the fix. The first is a straight up oops bug that all you have to do is read the code to see it's a guaranteed 100% oops bug. The second is a use-after-free issue. We get away lucky if the queue we are shutting down is empty, but if it isn't, we can end up oopsing. We really need to drain the queue before destroying it. The final one is an issue with bad user input causing us to access our port array out of bounds. While fixing the array out of bounds issue, it was noticed that the original code did the same thing twice (the call to rdma_ah_set_port_num()), so its removal is not balanced by a readd elsewhere, it was already where it needed to be in addition to where it didn't need to be. Summary: - Oops fix in hfi1 driver - use-after-free issue in iser-target - use of user supplied array index without proper checking" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: RDMA/mlx5: Fix out-of-bound access while querying AH IB/hfi1: Prevent a NULL dereference iser-target: Fix possible use-after-free in connection establishment error
2018-01-15RDMA/mlx5: Fix out-of-bound access while querying AHLeon Romanovsky1-4/+3
The rdma_ah_find_type() accesses the port array based on an index controlled by userspace. The existing bounds check is after the first use of the index, so userspace can generate an out of bounds access, as shown by the KASN report below. ================================================================== BUG: KASAN: slab-out-of-bounds in to_rdma_ah_attr+0xa8/0x3b0 Read of size 4 at addr ffff880019ae2268 by task ibv_rc_pingpong/409 CPU: 0 PID: 409 Comm: ibv_rc_pingpong Not tainted 4.15.0-rc2-00031-gb60a3faf5b83-dirty #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014 Call Trace: dump_stack+0xe9/0x18f print_address_description+0xa2/0x350 kasan_report+0x3a5/0x400 to_rdma_ah_attr+0xa8/0x3b0 mlx5_ib_query_qp+0xd35/0x1330 ib_query_qp+0x8a/0xb0 ib_uverbs_query_qp+0x237/0x7f0 ib_uverbs_write+0x617/0xd80 __vfs_write+0xf7/0x500 vfs_write+0x149/0x310 SyS_write+0xca/0x190 entry_SYSCALL_64_fastpath+0x18/0x85 RIP: 0033:0x7fe9c7a275a0 RSP: 002b:00007ffee5498738 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 00007fe9c7ce4b00 RCX: 00007fe9c7a275a0 RDX: 0000000000000018 RSI: 00007ffee5498800 RDI: 0000000000000003 RBP: 000055d0c8d3f010 R08: 00007ffee5498800 R09: 0000000000000018 R10: 00000000000000ba R11: 0000000000000246 R12: 0000000000008000 R13: 0000000000004fb0 R14: 000055d0c8d3f050 R15: 00007ffee5498560 Allocated by task 1: __kmalloc+0x3f9/0x430 alloc_mad_private+0x25/0x50 ib_mad_post_receive_mads+0x204/0xa60 ib_mad_init_device+0xa59/0x1020 ib_register_device+0x83a/0xbc0 mlx5_ib_add+0x50e/0x5c0 mlx5_add_device+0x142/0x410 mlx5_register_interface+0x18f/0x210 mlx5_ib_init+0x56/0x63 do_one_initcall+0x15b/0x270 kernel_init_freeable+0x2d8/0x3d0 kernel_init+0x14/0x190 ret_from_fork+0x24/0x30 Freed by task 0: (stack is not available) The buggy address belongs to the object at ffff880019ae2000 which belongs to the cache kmalloc-512 of size 512 The buggy address is located 104 bytes to the right of 512-byte region [ffff880019ae2000, ffff880019ae2200) The buggy address belongs to the page: page:000000005d674e18 count:1 mapcount:0 mapping: (null) index:0x0 compound_mapcount: 0 flags: 0x4000000000008100(slab|head) raw: 4000000000008100 0000000000000000 0000000000000000 00000001000c000c raw: dead000000000100 dead000000000200 ffff88001a402000 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff880019ae2100: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff880019ae2180: 00 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc >ffff880019ae2200: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ^ ffff880019ae2280: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff880019ae2300: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ================================================================== Disabling lock debugging due to kernel taint Cc: <stable@vger.kernel.org> Fixes: 44c58487d51a ("IB/core: Define 'ib' and 'roce' rdma_ah_attr types") Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-01-12net/mlx5: Fix mlx5_get_uars_page to return error codeEran Ben Elisha1-1/+1
Change mlx5_get_uars_page to return ERR_PTR in case of allocation failure. Change all callers accordingly to check the IS_ERR(ptr) instead of NULL. Fixes: 59211bd3b632 ("net/mlx5: Split the load/unload flow into hardware and software flows") Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-01-12{net,ib}/mlx5: Don't disable local loopback multicast traffic when neededEran Ben Elisha1-3/+6
There are systems platform information management interfaces (such as HOST2BMC) for which we cannot disable local loopback multicast traffic. Separate disable_local_lb_mc and disable_local_lb_uc capability bits so driver will not disable multicast loopback traffic if not supported. (It is expected that Firmware will not set disable_local_lb_mc if HOST2BMC is running for example.) Function mlx5_nic_vport_update_local_lb will do best effort to disable/enable UC/MC loopback traffic and return success only in case it succeeded to changed all allowed by Firmware. Adapt mlx5_ib and mlx5e to support the new cap bits. Fixes: 2c43c5a036be ("net/mlx5e: Enable local loopback in loopback selftest") Fixes: c85023e153e3 ("IB/mlx5: Add raw ethernet local loopback support") Fixes: bded747bb432 ("net/mlx5: Add raw ethernet local loopback firmware command") Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Cc: kernel-team@fb.com Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-01-10IB/mlx5: remove redundant assignment of mdevColin Ian King1-1/+1
The initial assignment to mdev is redundant as mdev is re-assigned later and the first assigned value is never read. Remove this redundant assignment. Cleans up clang warning: drivers/infiniband/hw/mlx5/main.c:359:24: warning: Value stored to 'mdev' during its initialization is never read Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.