aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/infiniband/hw/ocrdma/ocrdma_sli.h (follow)
AgeCommit message (Collapse)AuthorFilesLines
2015-12-28RDMA/ocrdma: Depend on async link events from CNADevesh Sharma1-4/+45
Recently Dough Ledford reported a deadlock happening between ocrdma-load sequence and NetworkManager service issuing "open" on be2net interface. The deadlock happens when any be2net hook (e.g. open/close) is called in parallel to insmod ocrdma.ko. A. be2net is sending administrative open/close event to ocrdma holding device_list_mutex. It does this from ndo_open/ndo_stop hooks of be2net. So sequence of locks is rtnl_lock---> device_list lock B. When new ocrdma roce device gets registered, infiniband stack now takes rtnl_lock in ib_register_device() in GID initialization routines. So sequence of locks in this path is device_list lock ---> rtnl_lock. This improper locking sequence causes deadlock. With this patch we stop using administrative open and close events injected by be2net driver. These events were used to dispatch PORT_ACTIVE and PORT_ERROR events to the IB-stack. This patch implements a logic to receive async-link-events generated from CNA whenever link-state-change is detected. Now on, these async-events will be used to dispatch PORT_ACTIVE and PORT_ERROR events to IB-stack. Depending on async-events from CNA removes the need to hold device-list-mutex and thus breaks the busy-wait scenario. Reported-by: Doug Ledford <dledford@redhat.com> CC: Sathya Perla <sathya.perla@avagotech.com> Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@avagotech.com> Signed-off-by: Selvin Xavier <selvin.xavier@avagotech.com> Signed-off-by: Devesh Sharma <devesh.sharma@avagotech.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-08-30RDMA/ocrdma: Incorporate the moving of GID Table mgmt to IB/CoreSomnath Kotur1-0/+2
1.Change query_gid hook to return value from IB/Core GID management APIs. 2.Get rid of all the netdev notifier chain subscription code as well as maintenance of SGID Table in memory. 3.Implement get_netdev hook in driver. Signed-off-by: Somnath Kotur <somnath.kotur@avagotech.com> Signed-off-by: Devesh Sharma <devesh.sharma@avagotech.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-24RDMA/ocrdma: update ocrdma license to dual-licenseDevesh Sharma1-19/+34
Change of license from GPLv2 to dual-license (GPLv2 and BSD 2-Clause) All contributors were contacted off-list and permission to make this change was received. The complete list of contributors are Cc:ed here. Cc: Tejun Heo <tj@kernel.org> Cc: Duan Jiong <duanj.fnst@cn.fujitsu.com> Cc: Roland Dreier <roland@purestorage.com> Cc: Jes Sorensen <Jes.Sorensen@redhat.com> Cc: Sasha Levin <levinsasha928@gmail.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Cc: Moni Shoua <monis@mellanox.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Li RongQing <roy.qing.li@gmail.com> Cc: Devendra Naga <devendra.aaru@gmail.com> Signed-off-by: Devesh Sharma <devesh.sharma@avagotech.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-05-18RDMA/ocrdma: Fix the request length for RDMA_QUERY_QP mailbox command to FW.Mitesh Ahuja1-0/+2
Fix ocrdma_query_qp to pass correct mailbox request length to FW. Signed-off-by: Mitesh Ahuja <mitesh.ahuja@avagotech.com> Signed-off-by: Selvin Xavier <selvin.xavier@avagotech.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-05-18RDMA/ocrdma: Report EQ full fatal errorDevesh Sharma1-0/+7
Detect when Event Queue (EQ) becomes full and print a warning message. Signed-off-by: Devesh Sharma <devesh.sharma@avagotech.com> Signed-off-by: Selvin Xavier <selvin.xavier@avagotech.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-02-18RDMA/ocrdma: set vlan present bit for user AHDevesh Sharma1-0/+1
For the AH that describs a VLAN interface details, vlan present bit needs to be set during posting a WQE. This patch adds the code to allow it happening. Signed-off-by: Mitesh Ahuja <mitesh.ahuja@emulex.com> Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2015-02-18RDMA/ocrdma: Add support for interrupt moderationMitesh Ahuja1-0/+24
Add support for interrupt moderation for ocrdma device. Thresholds for high interrupt rates are static values derived based on experimental results. Signed-off-by: Mitesh Ahuja <mitesh.ahuja@emulex.com> Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2015-02-18RDMA/ocrdma: Debugfs enhancments for ocrdma driverSelvin Xavier1-2/+6
1. Add statistics counters for error cqes. 2. Add file ("reset_stats") to reset rdma stats in Debugfs. Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com> Signed-off-by: Mitesh Ahuja <mitesh.ahuja@emulex.com> Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2015-02-18RDMA/ocrdma: Move PD resource management to driver.Mitesh Ahuja1-0/+33
Move PD allocation and deallocation from firmware to driver. At driver load time all the PDs will be requested from firmware and their management will be handled by driver to reduce mailbox commands overhead at runtime. Signed-off-by: Mitesh Ahuja <mitesh.ahuja@emulex.com> Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2015-02-18RDMA/ocrdma: Increase the GID table size.Mitesh Ahuja1-1/+1
Increase the GID table size from 8 to 16 enteries. Signed-off-by: Mitesh Ahuja <mitesh.ahuja@emulex.com> Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-10-10RDMA/ocrdma: Save the bit environment, spare unncessary parenthesisJes Sorensen1-19/+19
Parenthesis around constants serves no purpose, save the bits! Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-10-10RDMA/ocrdma: The kernel has a perfectly good BIT() macro - use itJes Sorensen1-101/+99
No need to re-invent the wheel here Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-08-12RDMA/ocrdma: Update sli data structure for endiannessDevesh Sharma1-39/+108
Update the sli specific mailbox command request/response data sturcures to fix endianness issues. Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-08-01RDMA/ocrdma: Increase the size of STAG array in dev structure to 16KSelvin Xavier1-1/+1
HW can support 16K STAG entries. Change this max limit. Also, move this array out of ocrdma_dev to reduce the size of this structure. Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-08-01RDMA/ocrdma: Add missing adapter mailbox opcodesSelvin Xavier1-29/+33
Fix the Statistics command opcode. Also specify the opcode of each command for better readablilty. Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com> Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-08-01RDMA/ocrdma: Return proper value for max_mr_sizeMitesh Ahuja1-1/+1
Update the max_mr_size with proper value. Corrected the response structure of query config mailbox command. Signed-off-by: Mitesh Ahuja <mitesh.ahuja@emulex.Com> Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-08-01RDMA/ocrdma: Remove hardcoding of the max DPP QPs supportedDevesh Sharma1-1/+0
Removing hardcoded value of max dpp qps and calculate the same from doorbell page size and WQE size. Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-08-01RDMA/ocrdma: Query and initalize the PFC SLSelvin Xavier1-1/+80
This patch implements routine to query the PFC priority from the adapter port. Following are the changes implemented: * A new FW command is implemented to query the operational/admin DCBX configuration from the FW and obtain active priority(service level). * Adds support for the async event reported by FW when the PFC priority changes. Service level is re-initialized during modify_qp or create_ah, based on this event. * Maintain SL value in ocrdma_dev structure and refer that as and when needed. Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-04-03RDMA/ocrdma: Code clean-upDevesh Sharma1-8/+8
Clean up code. Also modifying GSI QP to error during ocrdma_close is fixed. Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-04-03RDMA/ocrdma: Query controller informationSelvin Xavier1-1/+232
Issue mailbox commands to query ocrdma controller information and phy information and print them while adding ocrdma device. Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com> Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-04-03RDMA/ocrdma: Read ASIC_ID register to select asic_genDevesh Sharma1-2/+15
ocrdma driver selects execution path based on sli_family and asic generation number. This introduces code to read the asic gen number from pci register instead of obtaining it from the Emulex NIC driver. Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-04-03RDMA/ocrdma: SQ and RQ doorbell offset clean upDevesh Sharma1-1/+4
Introducing new macros to define SQ and RQ doorbell offset. Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-13RDMA/ocrdma: Fix OCRDMA_GEN2_FAMILY macro definitionDevesh Sharma1-1/+1
OCRDMA_GEN2_FAMILY is wrongly defined as 0x02 -- it should be 0x0F. Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-13RDMA/ocrdma: Fix AV_VALID bit positionDevesh Sharma1-1/+1
Fix ah->av->valid bit position and big endian portability. Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-09-02RDMA/ocrdma: Fill PVID in UMC caseNaresh Gottumukkala1-1/+17
In UMC case, driver needs to fill PVID in the address vector template for UD traffic. Signed-off-by: Naresh Gottumukkala <bgottumukkala@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-09-02RDMA/ocrdma: Fix for displaying proper link speedNaresh Gottumukkala1-0/+27
Signed-off-by: Naresh Gottumukkala <bgottumukkala@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-09-02RDMA/ocrdma: Increase STAG array sizeNaresh Gottumukkala1-1/+1
1) Increase STAG Array size. 2) Max inline data size should be set to the same value used during QP creation 3) Set max_sge_rd to zero since we dont support RD transport in our adapters. 4) Max cqes reported in ibv_devinfo should be from QUERY_CONFIG. Signed-off-by: Naresh Gottumukkala <bgottumukkala@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-09-02RDMA/ocrdma: Dont use PD 0 for userpace CQ DBNaresh Gottumukkala1-1/+3
Create_CQ verb doesn't provide a PD pointer. So, until now we are creating all (both userspace and kernel) CQ DB regions from PD0. This will result in mmapping PD0 to applications. A rogue userspace application can mess things up. Also more serious issues is even the be2net NIC uses PD0. This patch addresses this problem by: 1) Create a PD page for every userspace application when the alloc_ucontext is called. This will be destroyed in dealloc_ucontext. 2) All CQs for that context will use the PD allocated in ucontext. 3) The first create_PD call from application will result in returning the PD address from its ucontext (no new PD will be created). 4) For subsecquent create_pd calls from application, we create new PDs for the application. Signed-off-by: Naresh Gottumukkala <bgottumukkala@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-09-02RDMA/ocrdma: FRMA code cleanupNaresh Gottumukkala1-9/+7
1) Fixed setting FR_MR bit for FRWR stag allocation 2) Access rights are passsed during FRWR stage and not during STAT allocation stage 3) FRWR WQE structure cleanup 4) Add QP level signaled bit. Signed-off-by: Naresh Gottumukkala <bgottumukkala@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-09-02RDMA/ocrdma: For ERX2 irrespective of Qid, num_posted offset is 24Naresh Gottumukkala1-3/+2
1) All RQ doorbells are handled by ERX2 and doorbell->num_posted offset is constant to bit offset 24 for ERX2 irrspective of Q id. 2) Fixed RESET to INIT state change (from ERR->RST->INIT->RTR case). Signed-off-by: Naresh Gottumukkala <bgottumukkala@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-09-02RDMA/ocrdma: Add support for fast register work requests (FRWR)Naresh Gottumukkala1-0/+19
Also get the max_srq value from query_config mailbox response. Signed-off-by: Naresh Gottumukkala <bgottumukkala@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-08-12RDMA/ocrdma: Cache recv DB until QP moved to RTRNaresh Gottumukkala1-1/+1
1) In post recv, don't ring the DB doorbell if the QP is in RTR state. Cache the DB calls, until the QP is moved to RTS state. 2) Add max_rd_sge support to dev->attr. 3) Code cleanup in alloc_pd path. Signed-off-by: Naresh Gottumukkala <bgottumukkala@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-08-12RDMA/ocrdma: Remove __packedNaresh Gottumukkala1-66/+67
1) Remove __packed for structures. 2) Align and pad all ABI structure to 64 bit boundaries instead of using __packed. Signed-off-by: Naresh Gottumukkala <bgottumukkala@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-06-20RDMA/ocrdma: Change macros to inline funtionsNaresh Gottumukkala1-15/+0
Signed-off-by: Naresh Gottumukkala <bgottumukkala@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-06-20RDMA/ocrdma: Use MCC_CREATE_EXT_V1 for MCC createNaresh Gottumukkala1-18/+2
Use MCC_CREATE_EXT_V1 to create MCC_queue to receive RoCE events. Signed-off-by: Naresh Gottumukkala <bgottumukkala@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-06-11RDMA/ocrdma: Correct queue SGE calculationMahesh Vardhamanaiah1-0/+3
Fix max sge calculation for sq, rq, srq for all hardware types. Signed-off-by: Mahesh Vardhamanaiah <mahesh.vardhamanaiah@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-06-11RDMA/ocrdma: Correct reported max queue sizesMahesh Vardhamanaiah1-1/+1
Fix code to read the max wqe and max rqe values from mailbox response. Signed-off-by: Mahesh Vardhamanaiah <mahesh.vardhamanaiah@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-08RDMA/ocrdma: Add driver for Emulex OneConnect IBoE RDMA adapterParav Pandit1-0/+1672
Signed-off-by: Parav Pandit <parav.pandit@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.