aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/infiniband/hw/qib/qib_iba7322.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2013-11-08IB/qib: Fix txselect regressionMike Marciniszyn1-6/+5
Commit 7fac33014f54("IB/qib: checkpatch fixes") was overzealous in removing a simple_strtoul for a parse routine, setup_txselect(). That routine is required to handle a multi-value string. Unwind that aspect of the fix. Cc: <stable@vger.kernel.org> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-07-30IB/qib: Add err_decode() call for ring dumpMike Marciniszyn1-0/+2
Commit 0b3ddf380ca7 ("Log all SDMA errors unconditionally") missed part of the patch. This also corrects a format warning when dma_addr_t is 32 bits on a 64 bit system. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-07-11IB/qib: Log all SDMA errors unconditionallyDean Luick1-0/+114
This patch adds code to log SDMA errors for supportability purposes. Signed-off-by: Dean Luick <dean.luick@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-06-26IB/qib: New transmitter tunning settings for Dell 1.1 backplaneMitko Haralanov1-22/+37
The Dell blade chassis got an updated backplane which requires new transmitter tuning settings. Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-06-21IB/qib: Add DCA supportMike Marciniszyn1-12/+322
This patch adds DCA cache warming for systems that support DCA. The code uses cpu affinity notification to react to an affinity change from a user mode program like irqbalance and (re-)program the chip accordingly. This notification avoids reading the current cpu on every interrupt. Reviewed-by: Dean Luick <dean.luick@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> [ Add Kconfig dependency on SMP && GENERIC_HARDIRQS to avoid failure to build due to undefined struct irq_affinity_notify. - Roland ] Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-08-15IB/qib: Fix error return code in qib_init_7322_variables()Julia Lawall1-1/+3
Convert a 0 error return code to a negative one, as returned elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ identifier ret; expression e,e1,e2,e3,e4,x; @@ ( if (\(ret != 0\|ret < 0\) || ...) { ... return ...; } | ret = 0 ) ... when != ret = e1 *x = \(kmalloc\|kzalloc\|kcalloc\|devm_kzalloc\|ioremap\|ioremap_nocache\|devm_ioremap\|devm_ioremap_nocache\)(...); ... when != x = e2 when != ret = e3 *if (x == NULL || ...) { ... when != ret = e4 * return ret; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-07-19IB/qib: checkpatch fixesMike Marciniszyn1-71/+77
Elminate some simple_strto* usage. checkpatch also noted pr_ conversations, which have been done as recommended. The pr_fmt() define is used to shorten line length. Other multi-line string warnings are also elmininated. Reviewed-by: Dean Luick <dean.luick@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-07-17IB/qib: Fix QP RCU sparse warningsMike Marciniszyn1-7/+5
Commit af061a644a0e ("IB/qib: Use RCU for qpn lookup") introduced sparse warnings. This patch corrects those issues. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-14IB/qib: Fix QLE734X link cyclingMitko Haralanov1-1/+1
The SERDES was using the incorrect Frequency Loop Bandwidth setting causing the link to cycle through the Physical link negotiation state machine. Fixing the Frequency Loop Bandwidth setting in the SERDES helps the link come up faster and more reliably. Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-14IB/qib: Optimize pio ack buffer allocationMike Marciniszyn1-0/+1
This patch optimizes pio buffer allocation in the kernel. For qib, kernel pio buffers are used for sending acks. The code to allocate the buffer would always start at 0 until it found a buffer. This means that an average of 64 comparisions were done on each allocate, since the busy bit won't be cleared until the bits are refreshed when buffers are exhausted. This patch adds two new fields in the devdata struct, last_pio and min_kernel_pio. last_pio is the last buffer that was allocated. min_kernel_pio is the lowest potential available buffer. min_kernel_pio is modifed as contexts are allocated and deallocted. Reviewed-by: Ramkrishna Vepa <ramkrishna.vepa@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-02-25IB/qib: Add logic for affinity hintMike Marciniszyn1-31/+76
Call irq_set_affinity_hint() to give userspace programs such as irqbalance the information to be able to distribute qib interrupts appropriately. The logic allocates all non-receive interrupts to the first CPU local to the HCA. Receive interrupts are allocated round robin starting with the second CPU local to the HCA with potential wrap back to the second CPU. This patch also adds a refinement to the name registered for MSI-X interrupts so that user level scripts can determine the device associated with the IRQs when there are multiple HCAs with a potentially different set of local CPUs. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-01-03IB/qib: Default some module parameters optimallyMike Marciniszyn1-1/+1
Minimize the need for users to have to set module parameters to get good performance. The following two parameters are changed: - rcvhdrcnt to twice the rcvegrcnt - pcie_caps=0x51 The rcvhdrcnt at twice the egrcount allows the preemptive NAK code during reception to function in 100% of the cases rather than a sender jiffies-based timeout. The pcie_caps default of 0x51 will set the proposed MaxPayload and MaxReceiveReqest to 256 and 4096 respectively. The capabilities on the root complex will be used to limit those values. Reviewed-by: Ram Vepa <ram.vepa@qlogic.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-01-03IB/qib: Fix a possible data corruption when receiving packetsRam Vepa1-2/+4
Prevent a receive data corruption by ensuring that the write to update the rcvhdrheadn register to generate an interrupt is at the very end of the receive processing. Signed-off-by: Ramkrishna Vepa <ram.vepa@qlogic.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Cc: <stable@kernel.org> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-01-03IB/qib: Eliminate 64-bit jiffies useMike Marciniszyn1-17/+15
The qib driver makes use of the the 64-bit jiffies API. Code inspection reveals that that version of the API is not really required. This patch converts to use the "normal" jiffies. Reviewed-by: Ram Vepa <ram.vepa@qlogic.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-11-28IB/qib: Fix over-scheduling of QSFP workMike Marciniszyn1-8/+8
Don't over-schedule QSFP work on driver initialization. It could end up being run simultaneously on two different CPUs resulting in bad EEPROM reads. In combination with setting the physical IB link state prior to the IBC being brought out of reset, this can cause the link state machine to start training early with wrong settings. Signed-off-by: Mitko Haralanov <mitko@qlogic.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-11-08IB/qib: Don't use schedule_work()Mike Marciniszyn1-1/+1
It was mistakenly introduced by dde05cbdf8b1 ("IB/qib: Hold links until tuning data is available"). Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-11-06Merge branch 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linuxLinus Torvalds1-0/+1
* 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (230 commits) Revert "tracing: Include module.h in define_trace.h" irq: don't put module.h into irq.h for tracking irqgen modules. bluetooth: macroize two small inlines to avoid module.h ip_vs.h: fix implicit use of module_get/module_put from module.h nf_conntrack.h: fix up fallout from implicit moduleparam.h presence include: replace linux/module.h with "struct module" wherever possible include: convert various register fcns to macros to avoid include chaining crypto.h: remove unused crypto_tfm_alg_modname() inline uwb.h: fix implicit use of asm/page.h for PAGE_SIZE pm_runtime.h: explicitly requires notifier.h linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h miscdevice.h: fix up implicit use of lists and types stop_machine.h: fix implicit use of smp.h for smp_processor_id of: fix implicit use of errno.h in include/linux/of.h of_platform.h: delete needless include <linux/module.h> acpi: remove module.h include from platform/aclinux.h miscdevice.h: delete unnecessary inclusion of module.h device_cgroup.h: delete needless include <linux/module.h> net: sch_generic remove redundant use of <linux/module.h> net: inet_timewait_sock doesnt need <linux/module.h> ... Fix up trivial conflicts (other header files, and removal of the ab3550 mfd driver) in - drivers/media/dvb/frontends/dibx000_common.c - drivers/media/video/{mt9m111.c,ov6650.c} - drivers/mfd/ab3550-core.c - include/linux/dmaengine.h
2011-10-31infiniband: Fix up module files that need to include module.hPaul Gortmaker1-0/+1
They had been getting it implicitly via device.h but we can't rely on that for the future, due to a pending cleanup so fix it now. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31IB/qib: Fix issue with link states and QSFP cablesMitko Haralanov1-10/+20
Fix an issue where the link would come up after replugging a cable even if it has been DISABLED manually. Signed-off-by: Mitko Haralanov <mitko@qlogic.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-10-21IB/qib: Hold links until tuning data is availableMitko Haralanov1-43/+77
Hold the link state machine until the tuning data is read from the QSFP EEPROM so correct tuning settings are applied before the state machine attempts to bring the link up. Link is also held on cable unplug in case a different cable is used. Signed-off-by: Mitko Haralanov <mitko@qlogic.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-10-21IB/qib: Clean up checkpatch issueMike Marciniszyn1-2/+1
This was probably present from initial submission. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-10-21IB/qib: Eliminate divide/mod in converting idx to egr buf pointerMike Marciniszyn1-0/+2
The context init now saves a shift from rcvegrbufs_perchunk rcvegrbufs_perchunk_shift using ilog2. A BUG_ON() protects the power of 2 assumption. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-07-22IB/qib: Defer HCA error events to taskletMike Marciniszyn1-21/+50
With ib_qib options: options ib_qib krcvqs=1 pcie_caps=0x51 rcvhdrcnt=4096 singleport=1 ibmtu=4 a run of ib_write_bw -a yields the following: ------------------------------------------------------------------ #bytes #iterations BW peak[MB/sec] BW average[MB/sec] 1048576 5000 2910.64 229.80 ------------------------------------------------------------------ The top cpu use in a profile is: CPU: Intel Architectural Perfmon, speed 2400.15 MHz (estimated) Counted CPU_CLK_UNHALTED events (Clock cycles when not halted) with a unit mask of 0x00 (No unit mask) count 1002300 Counted LLC_MISSES events (Last level cache demand requests from this core that missed the LLC) with a unit mask of 0x41 (No unit mask) count 10000 samples % samples % app name symbol name 15237 29.2642 964 17.1195 ib_qib.ko qib_7322intr 12320 23.6618 1040 18.4692 ib_qib.ko handle_7322_errors 4106 7.8860 0 0 vmlinux vsnprintf Analysis of the stats, profile, the code, and the annotated profile indicate: - All of the overflow interrupts (one per packet overflow) are serviced on CPU0 with no mitigation on the frequency. - All of the receive interrupts are being serviced by CPU0. (That is the way truescale.cmds statically allocates the kctx IRQs to CPU) - The code is spending all of its time servicing QIB_I_C_ERROR RcvEgrFullErr interrupts on CPU0, starving the packet receive processing. - The decode_err routine is very inefficient, using a printf variant to format a "%s" and continues to loop when the errs mask has been cleared. - Both qib_7322intr and handle_7322_errors read pci registers, which is very inefficient. The fix does the following: - Adds a tasklet to service QIB_I_C_ERROR - Replaces the very inefficient scnprintf() with a memcpy(). A field is added to qib_hwerror_msgs to save the sizeof("string") at compile time so that a strlen is not needed during err_decode(). - The most frequent errors (Overflows) are serviced first to exit the loop as early as possible. - The loop now exits as soon as the errs mask is clear rather than fruitlessly looping through the msp array. With this fix the performance changes to: ------------------------------------------------------------------ #bytes #iterations BW peak[MB/sec] BW average[MB/sec] 1048576 5000 2990.64 2941.35 ------------------------------------------------------------------ During testing of the error handling overflow patch, it was determined that some CPU's were slower when servicing both overflow and receive interrupts on CPU0 with different MSI interrupt vectors. This patch adds an option (krcvq01_no_msi) to not use a dedicated MSI interrupt for kctx's < 2 and to service them on the default interrupt. For some CPUs, the cost of the interrupt enter/exit is more costly than then the additional PCI read in the default handler. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-07-18IB/qib: Remove double defineEdwin van Vliet1-1/+0
Signed-off-by: Edwin van Vliet <edwin@cheatah.nl> Reviewed-by: Jesper Juhl <jj@chaosbits.net> Acked-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-06-17IB/qib: Ensure that LOS and DFE are being turned offMitko Haralanov1-7/+18
Due to timing, it is possible for the LOS and DFE to remain on. This is due to the link progressing to LinkUP prior to the driver getting the first Status Changed interrupt. By expanding the conditions under which LOS is turned off and DFE timeout is being set, timing is no longer an issue. Signed-off-by: Mitko Haralanov <mitko@qlogic.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-05-09IB/qib: Prevent driver hang with unprogrammed boardsMitko Haralanov1-1/+2
The time limit test now correctly checks against current jiffies to avoid the hang. Signed-off-by: Mitko Haralanov <mitko@qlogic.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-04-26Revert wrong fixes for common misspellingsLucas De Marchi1-1/+1
These changes were incorrectly fixed by codespell. They were now manually corrected. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31Fix common misspellingsLucas De Marchi1-4/+4
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-14IB/qib: Set default LE2 value for active cables to 0Mitko Haralanov1-3/+10
For active and far-EQ cables use an LE2 value of 0 for improved SI. Signed-off-by: Mitko Haralanov <mitko@qlogic.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-01-28IB/qib: Hold link for TX SERDES settingsMitko Haralanov1-19/+11
Hold the IB link at DISABLED until we get the correct TX settings on mezz boards. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-01-17Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infinibandLinus Torvalds1-7/+7
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: RDMA: Update workqueue usage RDMA/nes: Fix incorrect SFP+ link status detection on driver init RDMA/nes: Fix SFP+ link down detection issue with switch port disable RDMA/nes: Generate IB_EVENT_PORT_ERR/PORT_ACTIVE events RDMA/nes: Fix bonding on iw_nes IB/srp: Test only once whether iu allocation succeeded IB/mlx4: Handle protocol field in multicast table RDMA: Use vzalloc() to replace vmalloc()+memset(0) mlx4_{core, ib, en}: Fix driver when sizeof (phys_addr_t) > sizeof (long) IB/mthca: Fix driver when sizeof (phys_addr_t) > sizeof (long)
2011-01-16RDMA: Update workqueue usageTejun Heo1-7/+7
* ib_wq is added, which is used as the common workqueue for infiniband instead of the system workqueue. All system workqueue usages including flush_scheduled_work() callers are converted to use and flush ib_wq. * cancel_delayed_work() + flush_scheduled_work() converted to cancel_delayed_work_sync(). * qib_wq is removed and ib_wq is used instead. This is to prepare for deprecation of flush_scheduled_work(). Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-13Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivialLinus Torvalds1-1/+1
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (43 commits) Documentation/trace/events.txt: Remove obsolete sched_signal_send. writeback: fix global_dirty_limits comment runtime -> real-time ppc: fix comment typo singal -> signal drivers: fix comment typo diable -> disable. m68k: fix comment typo diable -> disable. wireless: comment typo fix diable -> disable. media: comment typo fix diable -> disable. remove doc for obsolete dynamic-printk kernel-parameter remove extraneous 'is' from Documentation/iostats.txt Fix spelling milisec -> ms in snd_ps3 module parameter description Fix spelling mistakes in comments Revert conflicting V4L changes i7core_edac: fix typos in comments mm/rmap.c: fix comment sound, ca0106: Fix assignment to 'channel'. hrtimer: fix a typo in comment init/Kconfig: fix typo anon_inodes: fix wrong function name in comment fix comment typos concerning "consistent" poll: fix a typo in comment ... Fix up trivial conflicts in: - drivers/net/wireless/iwlwifi/iwl-core.c (moved to iwl-legacy.c) - fs/ext4/ext4.h Also fix missed 'diabled' typo in drivers/net/bnx2x/bnx2x.h while at it.
2011-01-10IB/qib: Improve SERDES tunning on QMH boardsMike Marciniszyn1-3/+23
Improve the QMH SERDES tunning on initial driver load by having the driver go through a link state change. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10IB/qib: Change receive queue/QPN selectionMike Marciniszyn1-6/+2
The basic idea is that on SusieQ, the difficult part of mapping QPN to context is handled by the mapping registers so the generic QPN allocation doesn't need to worry about chip specifics. For Monty and Linda, there is no mapping table so the qpt->mask (same as dd->qpn_mask), is used to see if the QPN to context falls within [zero..dd->n_krcv_queues). Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10IB/qib: Fix interrupt mitigationMike Marciniszyn1-3/+7
For SusieQ we need to write to the interrupt timer register before updating the header queue head with interrupt count. This is to ensure that the timer is enabled properly and a receive available interrupt is delivered. Otherwise this interrupt can be lost if the receiver header/eager queues are full before the timer is enabled. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10IB/qib: Add a few new SERDES tuningsMike Marciniszyn1-3/+26
Add new SERDES tuning to aid manufacturing. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10IB/qib: New SERDES init routine and improvements to SI qualityMike Marciniszyn1-15/+255
Implement new SERDES initialization routine and improvements to signal integrity -- disable LE1 adaptation, disable LOS after link-up, set better SERDES parameters. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10IB/qib: Add support for the new QME7362 cardMike Marciniszyn1-0/+4
Add support to recognize another board variation named QME7362. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10IB/qib: Add receive header queue size module parametersMike Marciniszyn1-4/+24
The receive header queue sizes need to modified for performance tuning. Three module parameters are added to support this. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10IB/qib: Remove IB latency turnoffMike Marciniszyn1-2/+0
This is required for hardware testing. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-11-01tree-wide: fix comment/printk typosUwe Kleine-König1-1/+1
"gadget", "through", "command", "maintain", "maintain", "controller", "address", "between", "initiali[zs]e", "instead", "function", "select", "already", "equal", "access", "management", "hierarchy", "registration", "interest", "relative", "memory", "offset", "already", Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-08-03IB/qib: Set cfgctxts to number of CPUs by defaultRalph Campbell1-1/+1
Up to now, we have set the number of available user contexts based on the number of hardware contexts which is set according to the number of available CPUs. This was fine since most CPUs had a power of two number of cores and the chip supported 4, 8, or 16 user contexts. Now that some systems have 12 cores, the default isn't optimal and should be set to 12 even though 16 hardware contexts need to be enabled. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-07-21IB/qib: Turn off IB latency modeRalph Campbell1-0/+2
Turn off IB latency mode. This improves link quality for slower process chips. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-07-06IB/qib: Update 7322 serdes tablesRalph Campbell1-4/+12
Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-07-06IB/qib: Mask hardware error during link resetRalph Campbell1-2/+7
The HCA checks for certain hardware errors which can be falsely triggered when the IB link is reset. The fix is to mask them rather than report them. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-07-06IB/qib: Don't mark VL15 bufs as WC to avoid a rare 7322 chip problemDave Olson1-1/+17
Don't set write combining via PAT on the VL15 buffers to avoid a rare problem with unaligned writes from interrupt-flushed store buffers. Signed-off-by: Dave Olson <dave.olson@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-05-27IB/qib: Remove DCA support until feature is finishedRalph Campbell1-189/+0
The DCA code was left over from internal development to test the hardware feature and allow performance testing. The results were mixed and will require some additional work to make full use of the feature. Therefore, it is being removed for now. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-05-26IB/qib: Use a single txselect module parameter for serdes tuningRalph Campbell1-403/+179
As part of the earlier patches submitted and reviewed, it was agreed to change the way serdes tuning parameters were specified to the driver. The updated patch got dropped by the linux-rdma email list so the earlier version of qib_iba7322.c ended up being used. This patch updates qib_iab7322.c to the simpler, single parameter method of setting the serdes parameters. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-05-23IB/qib: Add new qib driver for QLogic PCIe InfiniBand adaptersRalph Campbell1-0/+8058
Add a low-level IB driver for QLogic PCIe adapters. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.