| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
If there is a failure during probe of hfi1 before the sdma_map_lock is
initialized, the call to hfi1_free_devdata() will attempt to use a lock
that has not been initialized. If the locking correctness validator is on
then an INFO message and stack trace resembling the following may be seen:
INFO: trying to register non-static key.
The code is fine but needs lockdep annotation, or maybe
you didn't initialize this object before use?
turning off the locking correctness validator.
Call Trace:
register_lock_class+0x11b/0x880
__lock_acquire+0xf3/0x7930
lock_acquire+0xff/0x2d0
_raw_spin_lock_irq+0x46/0x60
sdma_clean+0x42a/0x660 [hfi1]
hfi1_free_devdata+0x3a7/0x420 [hfi1]
init_one+0x867/0x11a0 [hfi1]
pci_device_probe+0x40e/0x8d0
The use of sdma_map_lock in sdma_clean() is for freeing the sdma_map
memory, and sdma_map is not allocated/initialized until after
sdma_map_lock has been initialized. This code only needs to be run if
sdma_map is not NULL, and so checking for that condition will avoid trying
to use the lock before it is initialized.
Fixes: 473291b3ea0e ("IB/hfi1: Fix for early release of sdma context")
Fixes: 7724105686e7 ("IB/hfi1: add driver files")
Link: https://lore.kernel.org/r/20220520183701.48973.72434.stgit@awfm-01.cornelisnetworks.com
Reported-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Douglas Miller <doug.miller@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The commit in the Fixes tag has shuffled some code.
Now 'mcg_num' is incremented before the kzalloc(). So if the memory
allocation fails, this increment must be undone.
Fixes: a926a903b7dc ("RDMA/rxe: Do not call dev_mc_add/del() under a spinlock")
Link: https://lore.kernel.org/r/fe137cd8b1f17593243aa73d59c18ea71ab9ee36.1653225896.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Spelling mistake (triple letters) in comment.
Detected with the help of Coccinelle.
Link: https://lore.kernel.org/r/20220521111145.81697-87-Julia.Lawall@inria.fr
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Spelling mistake (triple letters) in comment.
Detected with the help of Coccinelle.
Link: https://lore.kernel.org/r/20220521111145.81697-86-Julia.Lawall@inria.fr
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Spelling mistake (triple letters) in comment.
Detected with the help of Coccinelle.
Link: https://lore.kernel.org/r/20220521111145.81697-83-Julia.Lawall@inria.fr
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Spelling mistake (triple letters) in comment.
Detected with the help of Coccinelle.
Link: https://lore.kernel.org/r/20220521111145.81697-56-Julia.Lawall@inria.fr
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Spelling mistake (triple letters) in comment.
Detected with the help of Coccinelle.
Link: https://lore.kernel.org/r/20220521111145.81697-4-Julia.Lawall@inria.fr
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Acked-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
|
|
If a callback break occurs (change notification), afs_getattr() needs to
issue an FS.FetchStatus RPC operation to update the status of the file
being examined by the stat-family of system calls.
Fix afs_getattr() to do this if AFS_VNODE_CB_PROMISED has been cleared
on a vnode by a callback break. Skip this if AT_STATX_DONT_SYNC is set.
This can be tested by appending to a file on one AFS client and then
using "stat -L" to examine its length on a machine running kafs. This
can also be watched through tracing on the kafs machine. The callback
break is seen:
kworker/1:1-46 [001] ..... 978.910812: afs_cb_call: c=0000005f YFSCB.CallBack
kworker/1:1-46 [001] ...1. 978.910829: afs_cb_break: 100058:23b4c:242d2c2 b=2 s=1 break-cb
kworker/1:1-46 [001] ..... 978.911062: afs_call_done: c=0000005f ret=0 ab=0 [0000000082994ead]
And then the stat command generated no traffic if unpatched, but with
this change a call to fetch the status can be observed:
stat-4471 [000] ..... 986.744122: afs_make_fs_call: c=000000ab 100058:023b4c:242d2c2 YFS.FetchStatus
stat-4471 [000] ..... 986.745578: afs_call_done: c=000000ab ret=0 ab=0 [0000000087fc8c84]
Fixes: 08e0e7c82eea ("[AF_RXRPC]: Make the in-kernel AFS filesystem use AF_RXRPC.")
Reported-by: Markus Suvanto <markus.suvanto@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Tested-by: Markus Suvanto <markus.suvanto@gmail.com>
Tested-by: kafs-testing+fedora34_64checkkafs-build-496@auristor.com
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216010
Link: https://lore.kernel.org/r/165308359800.162686.14122417881564420962.stgit@warthog.procyon.org.uk/ # v1
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When generating callstack information from branch_stack(Intel LBR), the
actual number of callstack entry should be bigger than the number of
branch_stack, for example:
branch_stack records:
B() -> C()
A() -> B()
converted callstack records should be:
C()
B()
A()
though, the number of callstack equals
to the number of branch stack plus 1.
This patch fixes above issue in branch_stack__printf(). For example,
# echo 'scale=2000; 4*a(1)' > cmd
# perf record --call-graph lbr bc -l < cmd
Before applying this patch, `perf script -D` output:
1220022677386876 0x2a40 [0xd8]: PERF_RECORD_SAMPLE(IP, 0x4002): 17990/17990: 0x40a6d6 period: 894172 addr: 0
... LBR call chain: nr:8
..... 0: fffffffffffffe00
..... 1: 000000000040a410
..... 2: 000000000040573c
..... 3: 0000000000408650
..... 4: 00000000004022f2
..... 5: 00000000004015f5
..... 6: 00007f5ed6dcb553
..... 7: 0000000000401698
... FP chain: nr:2
..... 0: fffffffffffffe00
..... 1: 000000000040a6d8
... branch callstack: nr:6 # which is not consistent with LBR records.
..... 0: 000000000040a410
..... 1: 0000000000408650 # ditto
..... 2: 00000000004022f2
..... 3: 00000000004015f5
..... 4: 00007f5ed6dcb553
..... 5: 0000000000401698
... thread: bc:17990
...... dso: /usr/bin/bc
bc 17990 1220022.677386: 894172 cycles:
40a410 [unknown] (/usr/bin/bc)
40573c [unknown] (/usr/bin/bc)
408650 [unknown] (/usr/bin/bc)
4022f2 [unknown] (/usr/bin/bc)
4015f5 [unknown] (/usr/bin/bc)
7f5ed6dcb553 __libc_start_main+0xf3 (/usr/lib64/libc-2.17.so)
401698 [unknown] (/usr/bin/bc)
After applied:
1220022677386876 0x2a40 [0xd8]: PERF_RECORD_SAMPLE(IP, 0x4002): 17990/17990: 0x40a6d6 period: 894172 addr: 0
... LBR call chain: nr:8
..... 0: fffffffffffffe00
..... 1: 000000000040a410
..... 2: 000000000040573c
..... 3: 0000000000408650
..... 4: 00000000004022f2
..... 5: 00000000004015f5
..... 6: 00007f5ed6dcb553
..... 7: 0000000000401698
... FP chain: nr:2
..... 0: fffffffffffffe00
..... 1: 000000000040a6d8
... branch callstack: nr:7
..... 0: 000000000040a410
..... 1: 000000000040573c
..... 2: 0000000000408650
..... 3: 00000000004022f2
..... 4: 00000000004015f5
..... 5: 00007f5ed6dcb553
..... 6: 0000000000401698
... thread: bc:17990
...... dso: /usr/bin/bc
bc 17990 1220022.677386: 894172 cycles:
40a410 [unknown] (/usr/bin/bc)
40573c [unknown] (/usr/bin/bc)
408650 [unknown] (/usr/bin/bc)
4022f2 [unknown] (/usr/bin/bc)
4015f5 [unknown] (/usr/bin/bc)
7f5ed6dcb553 __libc_start_main+0xf3 (/usr/lib64/libc-2.17.so)
401698 [unknown] (/usr/bin/bc)
Change from v1:
- refined code style according to Jiri's review comments.
Signed-off-by: Chengdong Li <chengdongli@tencent.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: likexu@tencent.com
Link: https://lore.kernel.org/r/20220517015726.96131-1-chengdongli@tencent.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Perf BPF filter test fails in environment where "clang" is not
installed.
Test failure logs:
<<>>
42: BPF filter :
42.1: Basic BPF filtering : Skip
42.2: BPF pinning : FAILED!
42.3: BPF prologue generation : FAILED!
<<>>
Enabling verbose option provided debug logs which says clang/llvm needs
to be installed. Snippet of verbose logs:
<<>>
42.2: BPF pinning :
--- start ---
test child forked, pid 61423
ERROR: unable to find clang.
Hint: Try to install latest clang/llvm to support BPF.
Check your $PATH
<<logs_here>>
Failed to compile test case: 'Basic BPF llvm compile'
Unable to get BPF object, fix kbuild first
test child finished with -1
---- end ----
BPF filter subtest 2: FAILED!
<<>>
Here subtests, "BPF pinning" and "BPF prologue generation" failed and
logs shows clang/llvm is needed. After installing clang, testcase
passes.
Reason on why subtest failure happens though logs has proper debug
information:
Main function __test__bpf calls test_llvm__fetch_bpf_obj by
passing 4th argument as true ( 4th arguments maps to parameter
"force" in test_llvm__fetch_bpf_obj ). But this will cause
test_llvm__fetch_bpf_obj to skip the check for clang/llvm.
Snippet of code part which checks for clang based on
parameter "force" in test_llvm__fetch_bpf_obj:
<<>>
if (!force && (!llvm_param.user_set_param &&
<<>>
Since force is set to "false", test won't get skipped and fails to
compile test case. The BPF code compilation needs clang, So pass the
fourth argument as "false" and also skip the test if reason for return
is "TEST_SKIP"
After the patch:
<<>>
42: BPF filter :
42.1: Basic BPF filtering : Skip
42.2: BPF pinning : Skip
42.3: BPF prologue generation : Skip
<<>>
Fixes: ba1fae431e74bb42 ("perf test: Add 'perf test BPF'")
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nageswara R Sastry <rnsastry@linux.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lore.kernel.org/r/20220511115438.84032-1-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The session topology test fails in powerpc pSeries platform.
Test logs:
<<>>
Session topology : FAILED!
<<>>
This testcases tests cpu topology by checking the core_id and socket_id
stored in perf_env from perf session. The data from perf session is
compared with the cpu topology information from
"/sys/devices/system/cpu/cpuX/topology" like core_id,
physical_package_id.
In case of virtual environment, detail like physical_package_id is
restricted to be exposed. Hence physical_package_id is set to -1. The
testcase fails on such platforms since socket_id can't be fetched from
topology info.
Skip the testcase in powerpc if physical_package_id returns -1.
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>---
Tested-by: Disha Goel <disgoel@linux.vnet.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nageswara R Sastry <rnsastry@linux.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20220511114959.84002-1-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The compilation on s390 results in this error:
# make DEBUG=y bench/numa.o
...
bench/numa.c: In function ‘__bench_numa’:
bench/numa.c:1749:81: error: ‘%d’ directive output may be truncated
writing between 1 and 11 bytes into a region of size between
10 and 20 [-Werror=format-truncation=]
1749 | snprintf(tname, sizeof(tname), "process%d:thread%d", p, t);
^~
...
bench/numa.c:1749:64: note: directive argument in the range
[-2147483647, 2147483646]
...
#
The maximum length of the %d replacement is 11 characters because of the
negative sign. Therefore extend the array by two more characters.
Output after:
# make DEBUG=y bench/numa.o > /dev/null 2>&1; ll bench/numa.o
-rw-r--r-- 1 root root 418320 May 19 09:11 bench/numa.o
#
Fixes: 3aff8ba0a4c9c919 ("perf bench numa: Avoid possible truncation when using snprintf()")
Suggested-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: https://lore.kernel.org/r/20220520081158.2990006-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
for_each_shell_test() is already strict in expecting tests to be files
and executable. It is sometimes possible when it iterates over all files
that it finds one that is executable and lacks a newline character. When
this happens the loop never terminates as it doesn't check for EOF.
Add the EOF check to make this loop at least bounded by the file size.
If the description is returned as NULL then also skip the test.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Marco Elver <elver@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Sohaib Mohamed <sohaib.amhmd@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20220517204144.645913-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The X86 specific arch__intr_reg_mask() is to check whether the kernel
and hardware can collect XMM registers. But it doesn't work on some
hybrid platform.
Without the patch on ADL-N:
$ perf record -I?
available registers: AX BX CX DX SI DI BP SP IP FLAGS CS SS R8 R9 R10
R11 R12 R13 R14 R15
The config of the test event doesn't contain the PMU information. The
kernel may fail to initialize it on the correct hybrid PMU and return
the wrong non-supported information.
Add the PMU information into the config for the hybrid platform. The
same register set is supported among different hybrid PMUs. Checking
the first available one is good enough.
With the patch on ADL-N:
$ perf record -I?
available registers: AX BX CX DX SI DI BP SP IP FLAGS CS SS R8 R9 R10
R11 R12 R13 R14 R15 XMM0 XMM1 XMM2 XMM3 XMM4 XMM5 XMM6 XMM7 XMM8 XMM9
XMM10 XMM11 XMM12 XMM13 XMM14 XMM15
Fixes: 6466ec14aaf44ff1 ("perf regs x86: Add X86 specific arch__intr_reg_mask()")
Reported-by: Ammy Yi <ammy.yi@intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20220518145125.1494156-1-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
"perf all PMU test" picks the input events from "perf list --raw-dump
pmu" list and runs "perf stat -e" for each of the event in the list. In
case of powerpc, the PowerVM environment supports events from hv_24x7
and hv_gpci PMU which is of example format like below:
- hv_24x7/CPM_ADJUNCT_INST,domain=?,core=?/
- hv_gpci/event,partition_id=?/
The value for "?" needs to be filled in depending on system and
respective event. CPM_ADJUNCT_INST needs have core value and domain
value. hv_gpci event needs partition_id. Similarly, there are other
events for hv_24x7 and hv_gpci having "?" in event format. Hence skip
these events on powerpc platform since values like partition_id, domain
is specific to system and event.
Fixes: 3d5ac9effcc640d5 ("perf test: Workload test of all PMUs")
Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nageswara R Sastry <rnsastry@linux.ibm.com>
Link: https://lore.kernel.org/r/20220520101236.17249-1-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Due to i2c->adap.dev.fwnode not being set, ACPI_COMPANION() wasn't properly
found for TWSI controllers.
Signed-off-by: Szymon Balcerak <sbalcerak@marvell.com>
Signed-off-by: Piyush Malgujar <pmalgujar@marvell.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Before sending a MSI the hardware writes information pertinent to the
interrupt cause to a memory location pointed by SMTICL register. This
memory holds three double words where the least significant bit tells
whether the interrupt cause of master/target/error is valid. The driver
does not use this but we need to set it up because otherwise it will
perform DMA write to the default address (0) and this will cause an
IOMMU fault such as below:
DMAR: DRHD: handling fault status reg 2
DMAR: [DMA Write] Request device [00:12.0] PASID ffffffff fault addr 0
[fault reason 05] PTE Write access is not set
To prevent this from happening, provide a proper DMA buffer for this
that then gets mapped by the IOMMU accordingly.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Fix the missing clk_disable_unprepare() before return
from mtk_i2c_probe() in the error handling case.
Fixes: d04913ec5f89 ("i2c: mt7621: Add MediaTek MT7621/7628/7688 I2C driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Norbert reported that it's possible to race sys_perf_event_open() such
that the looser ends up in another context from the group leader,
triggering many WARNs.
The move_group case checks for races against itself, but the
!move_group case doesn't, seemingly relying on the previous
group_leader->ctx == ctx check. However, that check is racy due to not
holding any locks at that time.
Therefore, re-check the result after acquiring locks and bailing
if they no longer match.
Additionally, clarify the not_move_group case from the
move_group-vs-move_group race.
Fixes: f63a8daa5812 ("perf: Fix event->ctx locking")
Reported-by: Norbert Slusarek <nslusarek@gmx.net>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
With shadow paging enabled, the INVPCID instruction results in a call
to kvm_mmu_invpcid_gva. If INVPCID is executed with CR0.PG=0, the
invlpg callback is not set and the result is a NULL pointer dereference.
Fix it trivially by checking for mmu->invlpg before every call.
There are other possibilities:
- check for CR0.PG, because KVM (like all Intel processors after P5)
flushes guest TLB on CR0.PG changes so that INVPCID/INVLPG are a
nop with paging disabled
- check for EFER.LMA, because KVM syncs and flushes when switching
MMU contexts outside of 64-bit mode
All of these are tricky, go for the simple solution. This is CVE-2022-1789.
Reported-by: Yongkang Jia <kangel@zju.edu.cn>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
In kvm_hv_flush_tlb(), valid_bank_mask is declared as unsigned long,
but is used as u64, which is wrong for i386, and has been spotted by
LKP after applying "KVM: x86: hyper-v: replace bitmap_weight() with
hweight64()"
https://lore.kernel.org/lkml/20220510154750.212913-12-yury.norov@gmail.com/
But it's wrong even without that patch because now bitmap_weight()
dereferences a word after valid_bank_mask on i386.
>> include/asm-generic/bitops/const_hweight.h:21:76: warning: right shift count >= width of type
+[-Wshift-count-overflow]
21 | #define __const_hweight64(w) (__const_hweight32(w) + __const_hweight32((w) >> 32))
| ^~
include/asm-generic/bitops/const_hweight.h:10:16: note: in definition of macro '__const_hweight8'
10 | ((!!((w) & (1ULL << 0))) + \
| ^
include/asm-generic/bitops/const_hweight.h:20:31: note: in expansion of macro '__const_hweight16'
20 | #define __const_hweight32(w) (__const_hweight16(w) + __const_hweight16((w) >> 16))
| ^~~~~~~~~~~~~~~~~
include/asm-generic/bitops/const_hweight.h:21:54: note: in expansion of macro '__const_hweight32'
21 | #define __const_hweight64(w) (__const_hweight32(w) + __const_hweight32((w) >> 32))
| ^~~~~~~~~~~~~~~~~
include/asm-generic/bitops/const_hweight.h:29:49: note: in expansion of macro '__const_hweight64'
29 | #define hweight64(w) (__builtin_constant_p(w) ? __const_hweight64(w) : __arch_hweight64(w))
| ^~~~~~~~~~~~~~~~~
arch/x86/kvm/hyperv.c:1983:36: note: in expansion of macro 'hweight64'
1983 | if (hc->var_cnt != hweight64(valid_bank_mask))
| ^~~~~~~~~
CC: Borislav Petkov <bp@alien8.de>
CC: Dave Hansen <dave.hansen@linux.intel.com>
CC: H. Peter Anvin <hpa@zytor.com>
CC: Ingo Molnar <mingo@redhat.com>
CC: Jim Mattson <jmattson@google.com>
CC: Joerg Roedel <joro@8bytes.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Sean Christopherson <seanjc@google.com>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: Vitaly Kuznetsov <vkuznets@redhat.com>
CC: Wanpeng Li <wanpengli@tencent.com>
CC: kvm@vger.kernel.org
CC: linux-kernel@vger.kernel.org
CC: x86@kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Message-Id: <20220519171504.1238724-1-yury.norov@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Fix a goof in kvm_prepare_memory_region() where KVM fails to free the
new memslot's dirty bitmap during a CREATE action if
kvm_arch_prepare_memory_region() fails. The logic is supposed to detect
if the bitmap was allocated and thus needs to be freed, versus if the
bitmap was inherited from the old memslot and thus needs to be kept. If
there is no old memslot, then obviously the bitmap can't have been
inherited
The bug was exposed by commit 86931ff7207b ("KVM: x86/mmu: Do not create
SPTEs for GFNs that exceed host.MAXPHYADDR"), which made it trivally easy
for syzkaller to trigger failure during kvm_arch_prepare_memory_region(),
but the bug can be hit other ways too, e.g. due to -ENOMEM when
allocating x86's memslot metadata.
The backtrace from kmemleak:
__vmalloc_node_range+0xb40/0xbd0 mm/vmalloc.c:3195
__vmalloc_node mm/vmalloc.c:3232 [inline]
__vmalloc+0x49/0x50 mm/vmalloc.c:3246
__vmalloc_array mm/util.c:671 [inline]
__vcalloc+0x49/0x70 mm/util.c:694
kvm_alloc_dirty_bitmap virt/kvm/kvm_main.c:1319
kvm_prepare_memory_region virt/kvm/kvm_main.c:1551
kvm_set_memslot+0x1bd/0x690 virt/kvm/kvm_main.c:1782
__kvm_set_memory_region+0x689/0x750 virt/kvm/kvm_main.c:1949
kvm_set_memory_region virt/kvm/kvm_main.c:1962
kvm_vm_ioctl_set_memory_region virt/kvm/kvm_main.c:1974
kvm_vm_ioctl+0x377/0x13a0 virt/kvm/kvm_main.c:4528
vfs_ioctl fs/ioctl.c:51
__do_sys_ioctl fs/ioctl.c:870
__se_sys_ioctl fs/ioctl.c:856
__x64_sys_ioctl+0xfc/0x140 fs/ioctl.c:856
do_syscall_x64 arch/x86/entry/common.c:50
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
And the relevant sequence of KVM events:
ioctl(3, KVM_CREATE_VM, 0) = 4
ioctl(4, KVM_SET_USER_MEMORY_REGION, {slot=0,
flags=KVM_MEM_LOG_DIRTY_PAGES,
guest_phys_addr=0x10000000000000,
memory_size=4096,
userspace_addr=0x20fe8000}
) = -1 EINVAL (Invalid argument)
Fixes: 244893fa2859 ("KVM: Dynamically allocate "new" memslots from the get-go")
Cc: stable@vger.kernel.org
Reported-by: syzbot+8606b8a9cc97a63f1c87@syzkaller.appspotmail.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220518003842.1341782-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The driver doesn't take struct pwm_state::polarity into account when
configuring the hardware, so refuse requests for inverted polarity.
Fixes: 757642f9a584 ("gpio: mvebu: Add limited PWM support")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
|
|
For gpio controller contain register PDDR, when set one target bit,
current logic will clear all other bits, this is wrong. Use operator
'|=' to fix it.
Fixes: 659d8a62311f ("gpio: vf610: add imx7ulp support")
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
|
|
Flushing system-wide workqueues is dangerous and will be forbidden.
Replace system_wq with local cm_wq.
Link: https://lore.kernel.org/r/22f7183b-cc16-5a34-e879-7605f5efc6e6@I-love.SAKURA.ne.jp
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Flushing system-wide workqueues is dangerous and will be forbidden.
Replace system_wq with local isert_login_wq.
Link: https://lore.kernel.org/r/fbe5e9a8-0110-0c22-b7d6-74d53948d042@I-love.SAKURA.ne.jp
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Stat events can come from disk and so need a degree of validation. They
contain a CPU which needs looking up via CPU map to access a counter.
Add the CPU to index translation, alongside validity checking.
Discussion thread:
https://lore.kernel.org/linux-perf-users/CAP-5=fWQR=sCuiSMktvUtcbOLidEpUJLCybVF6=BRvORcDOq+g@mail.gmail.com/
Fixes: 7ac0089d138f80dc ("perf evsel: Pass cpu not cpu map index to synthesize")
Reported-by: Michael Petlan <mpetlan@redhat.com>
Suggested-by: Michael Petlan <mpetlan@redhat.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Dave Marchevsky <davemarchevsky@fb.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Lv Ruyi <lv.ruyi@zte.com.cn>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: netdev@vger.kernel.org
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Monnet <quentin@isovalent.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: Yonghong Song <yhs@fb.com>
Link: http://lore.kernel.org/lkml/20220519032005.1273691-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The splat below can be seen when running kvm-unit-test:
=============================
WARNING: suspicious RCU usage
5.18.0-rc7 #5 Tainted: G IOE
-----------------------------
/home/kernel/linux/arch/x86/kvm/../../../virt/kvm/eventfd.c:80 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
4 locks held by qemu-system-x86/35124:
#0: ffff9725391d80b8 (&vcpu->mutex){+.+.}-{4:4}, at: kvm_vcpu_ioctl+0x77/0x710 [kvm]
#1: ffffbd25cfb2a0b8 (&kvm->srcu){....}-{0:0}, at: vcpu_enter_guest+0xdeb/0x1900 [kvm]
#2: ffffbd25cfb2b920 (&kvm->irq_srcu){....}-{0:0}, at: kvm_hv_notify_acked_sint+0x79/0x1e0 [kvm]
#3: ffffbd25cfb2b920 (&kvm->irq_srcu){....}-{0:0}, at: irqfd_resampler_ack+0x5/0x110 [kvm]
stack backtrace:
CPU: 2 PID: 35124 Comm: qemu-system-x86 Tainted: G IOE 5.18.0-rc7 #5
Call Trace:
<TASK>
dump_stack_lvl+0x6c/0x9b
irqfd_resampler_ack+0xfd/0x110 [kvm]
kvm_notify_acked_gsi+0x32/0x90 [kvm]
kvm_hv_notify_acked_sint+0xc5/0x1e0 [kvm]
kvm_hv_set_msr_common+0xec1/0x1160 [kvm]
kvm_set_msr_common+0x7c3/0xf60 [kvm]
vmx_set_msr+0x394/0x1240 [kvm_intel]
kvm_set_msr_ignored_check+0x86/0x200 [kvm]
kvm_emulate_wrmsr+0x4f/0x1f0 [kvm]
vmx_handle_exit+0x6fb/0x7e0 [kvm_intel]
vcpu_enter_guest+0xe5a/0x1900 [kvm]
kvm_arch_vcpu_ioctl_run+0x16e/0xac0 [kvm]
kvm_vcpu_ioctl+0x279/0x710 [kvm]
__x64_sys_ioctl+0x83/0xb0
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
resampler-list is protected by irq_srcu (see kvm_irqfd_assign), so fix
the false positive by using list_for_each_entry_srcu().
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1652950153-12489-1-git-send-email-wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Avi Kivity reported a problem where the __weak
btf__load_from_kernel_by_id() in tools/perf/util/bpf-event.c was being
used and it called btf__get_from_id() in tools/lib/bpf/btf.c that in
turn called back to btf__load_from_kernel_by_id(), resulting in an
endless loop.
Fix this by adding a feature test to check if
btf__load_from_kernel_by_id() is available when building perf with
LIBBPF_DYNAMIC=1, and if not then provide the fallback to the old
btf__get_from_id(), that doesn't call back to btf__load_from_kernel_by_id()
since at that time it didn't exist at all.
Tested on Fedora 35 where we have libbpf-devel 0.4.0 with LIBBPF_DYNAMIC
where we don't have btf__load_from_kernel_by_id() and thus its feature
test fail, not defining HAVE_LIBBPF_BTF__LOAD_FROM_KERNEL_BY_ID:
$ cat /tmp/build/perf-urgent/feature/test-libbpf-btf__load_from_kernel_by_id.make.output
test-libbpf-btf__load_from_kernel_by_id.c: In function ‘main’:
test-libbpf-btf__load_from_kernel_by_id.c:6:16: error: implicit declaration of function ‘btf__load_from_kernel_by_id’ [-Werror=implicit-function-declaration]
6 | return btf__load_from_kernel_by_id(20151128, NULL);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
$
$ nm /tmp/build/perf-urgent/perf | grep btf__load_from_kernel_by_id
00000000005ba180 T btf__load_from_kernel_by_id
$
$ objdump --disassemble=btf__load_from_kernel_by_id -S /tmp/build/perf-urgent/perf
/tmp/build/perf-urgent/perf: file format elf64-x86-64
<SNIP>
00000000005ba180 <btf__load_from_kernel_by_id>:
#include "record.h"
#include "util/synthetic-events.h"
#ifndef HAVE_LIBBPF_BTF__LOAD_FROM_KERNEL_BY_ID
struct btf *btf__load_from_kernel_by_id(__u32 id)
{
5ba180: 55 push %rbp
5ba181: 48 89 e5 mov %rsp,%rbp
5ba184: 48 83 ec 10 sub $0x10,%rsp
5ba188: 64 48 8b 04 25 28 00 mov %fs:0x28,%rax
5ba18f: 00 00
5ba191: 48 89 45 f8 mov %rax,-0x8(%rbp)
5ba195: 31 c0 xor %eax,%eax
struct btf *btf;
#pragma GCC diagnostic push
#pragma GCC diagnostic ignored "-Wdeprecated-declarations"
int err = btf__get_from_id(id, &btf);
5ba197: 48 8d 75 f0 lea -0x10(%rbp),%rsi
5ba19b: e8 a0 57 e5 ff call 40f940 <btf__get_from_id@plt>
5ba1a0: 89 c2 mov %eax,%edx
#pragma GCC diagnostic pop
return err ? ERR_PTR(err) : btf;
5ba1a2: 48 98 cltq
5ba1a4: 85 d2 test %edx,%edx
5ba1a6: 48 0f 44 45 f0 cmove -0x10(%rbp),%rax
}
<SNIP>
Fixes: 218e7b775d368f38 ("perf bpf: Provide a weak btf__load_from_kernel_by_id() for older libbpf versions")
Reported-by: Avi Kivity <avi@scylladb.com>
Link: https://lore.kernel.org/linux-perf-users/f0add43b-3de5-20c5-22c4-70aff4af959f@scylladb.com
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/linux-perf-users/YobjjFOblY4Xvwo7@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add a test to demonstrate that when the guest programs an event select
it is matched correctly in the pmu event filter and not inadvertently
filtered. This could happen on AMD if the high nybble[1] in the event
select gets truncated away only leaving the bottom byte[2] left for
matching.
This is a contrived example used for the convenience of demonstrating
this issue, however, this can be applied to event selects 0x28A (OC
Mode Switch) and 0x08A (L1 BTB Correction), where 0x08A could end up
being denied when the event select was only set up to deny 0x28A.
[1] bits 35:32 in the event select register and bits 11:8 in the event
select.
[2] bits 7:0 in the event select register and bits 7:0 in the event
select.
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Message-Id: <20220517051238.2566934-3-aaronlewis@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add a helper function that creates a pmu event filter given an event
list. Currently, a pmu event filter can only be created with the same
hard coded event list. Add a way to create one given a different event
list.
Also, rename make_pmu_event_filter to alloc_pmu_event_filter to clarify
it's purpose given the introduction of create_pmu_event_filter.
No functional changes intended.
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Message-Id: <20220517051238.2566934-2-aaronlewis@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
When returning from the compare function the u64 is truncated to an
int. This results in a loss of the high nybble[1] in the event select
and its sign if that nybble is in use. Switch from using a result that
can end up being truncated to a result that can only be: 1, 0, -1.
[1] bits 35:32 in the event select register and bits 11:8 in the event
select.
Fixes: 7ff775aca48ad ("KVM: x86/pmu: Use binary search to check filtered events")
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220517051238.2566934-1-aaronlewis@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Fix referencing sense data when it is invalid. When the length of the data
segment is 0, there is no valid information in the rsp field, so
ufshpb_rsp_upiu() is returned without additional operation.
Link: https://lore.kernel.org/r/252651381.41652940482659.JavaMail.epsvc@epcpadp4
Fixes: 4b5f49079c52 ("scsi: ufs: ufshpb: L2P map management for HPB read")
Acked-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Daejun Park <daejun7.park@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Fix reg address typo in the gpio1 stanza.
Signed-off-by: Conor Paxton <conor.paxton@microchip.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Fixes: 528a5b1f2556 ("riscv: dts: microchip: add new peripherals to icicle kit device tree")
Link: https://lore.kernel.org/r/20220517104058.2004734-1-conor.paxton@microchip.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The pointer imr->umem is assigned twice. Fix this by removing the
redundant one.
Link: https://lore.kernel.org/r/20220518044914.1903125-1-matsuda-daisuke@fujitsu.com
Signed-off-by: Daisuke Matsuda <matsuda-daisuke@fujitsu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Fixes dtbs_check warnings like:
dma@3000000: $nodename:0: 'dma@3000000' does not match '^dma-controller(@.*)?$'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20220407193856.18223-1-krzysztof.kozlowski@linaro.org
Fixes: c5ab54e9945b ("riscv: dts: add support for PDMA device of HiFive Unleashed Rev A00")
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
It turned out that polling period for MMC_SEND_OP_COND, that currently is
set to 1ms, still isn't sufficient. In particular a Micron eMMC on a
Beaglebone platform, is reported to sometimes fail to initialize.
Additional test, shows that extending the period to 4ms is working fine, so
let's make that change.
Reported-by: Jean Rene Dawin <jdawin@math.uni-bielefeld.de>
Tested-by: Jean Rene Dawin <jdawin@math.uni-bielefeld.de>
Fixes: 1760fdb6fe9f (mmc: core: Restore (almost) the busy polling for MMC_SEND_OP_COND")
Fixes: 76bfc7ccc2fa ("mmc: core: adjust polling interval for CMD1")
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20220517101046.27512-1-ulf.hansson@linaro.org
|
|
When removing short term pins, I've changed the the batch buffer
pinning for relocation to use __i915_vma_pin, because
i915_gem_object_ggtt_pin_ww was destroying the old vma. This
caused regressions, because the functions are not identical.
Fix the regressions by calling i915_gem_object_ggtt_pin_ww() again
on ggtt-only platforms, but only if the batch can be pinned without
being moved.
Fixes: b5cfe6f7a6e1 ("drm/i915: Remove short-term pins from execbuf, v6.")
Cc: Matthew Auld <matthew.auld@intel.com>
Reported-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Matthew Auld <matthew.auld@intel.com>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5806
Link: https://patchwork.freedesktop.org/patch/msgid/20220511115219.46507-1-maarten.lankhorst@linux.intel.com
(cherry picked from commit 451374eef622fca6f00eeeda89aaccb45a30a149)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
It is possible to stack bridges on top of each other. Consider the
following which makes use of an Ethernet switch:
br1
/ \
/ \
/ \
br0.11 wlan0
|
br0
/ | \
p1 p2 p3
br0 is offloaded to the switch. Above br0 is a vlan interface, for
vlan 11. This vlan interface is then a slave of br1. br1 also has a
wireless interface as a slave. This setup trunks wireless lan traffic
over the copper network inside a VLAN.
A frame received on p1 which is passed up to the bridge has the
skb->offload_fwd_mark flag set to true, indicating that the switch has
dealt with forwarding the frame out ports p2 and p3 as needed. This
flag instructs the software bridge it does not need to pass the frame
back down again. However, the flag is not getting reset when the frame
is passed upwards. As a result br1 sees the flag, wrongly interprets
it, and fails to forward the frame to wlan0.
When passing a frame upwards, clear the flag. This is the Rx
equivalent of br_switchdev_frame_unmark() in br_dev_xmit().
Fixes: f1c2eddf4cb6 ("bridge: switchdev: Use an helper to clear forward mark")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20220518005840.771575-1-andrew@lunn.ch
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In the detach path, the driver calls sysfs_remove_group() for the
groups it believes has been registered. However, if the group was
never previously registered, then this causes a splat.
Instead, compute the groups that should be registered in advance,
and then call sysfs_create_groups(), which registers them all at once.
Update the error handling appropriately.
Fixes: c205d53c4923 ("ptp: ocp: Add firmware capability bits for feature gating")
Reported-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Link: https://lore.kernel.org/r/20220517214600.10606-1-jonathan.lemon@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix missing backslash, introduced in f62c5acc800ee. Causes all tests to
not be installed.
Fixes: f62c5acc800e ("selftests/net/forwarding: add missing tests to Makefile")
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Acked-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20220518151630.2747773-1-troglobit@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Rename ili251x_hardware_reset() to ili210x_hardware_reset(), change its
parameter from struct device * to struct gpio_desc *, and use it as one
single consistent reset implementation all over the driver. Also increase
the minimum reset duration to 12ms, to make sure the reset is really
within the spec.
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20220518210423.106555-1-marex@denx.de
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
According to Ilitek "231x & ILI251x Programming Guide" Version: 2.30
"2.1. Power Sequence", "T4 Chip Reset and discharge time" is minimum
10ms and "T2 Chip initial time" is maximum 150ms. Adjust the reset
timings such that T4 is 12ms and T2 is 160ms to fit those figures.
This prevents sporadic touch controller start up failures when some
systems with at least ILI251x controller boot, without this patch
the systems sometimes fail to communicate with the touch controller.
Fixes: 201f3c803544c ("Input: ili210x - add reset GPIO support")
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20220518204901.93534-1-marex@denx.de
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
An A+A configuration on ASUS ROG Strix G513QY proves that the ASIC
reset for handling aborted suspend can't work with s2idle.
This functionality was introduced in commit daf8de0874ab5b ("drm/amdgpu:
always reset the asic in suspend (v2)"). A few other commits have
gone on top of the ASIC reset, but this still doesn't work on the A+A
configuration in s2idle.
Avoid doing the reset on dGPUs specifically when using s2idle.
Fixes: daf8de0874ab5b ("drm/amdgpu: always reset the asic in suspend (v2)")
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2008
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
cancel_request() never guaranteed that after its return the OSD
client would be completely done with the OSD request. The callback
(if specified) can still be invoked and a ref can still be held.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
|
|
request_reinit() is not only ugly as the comment rightfully suggests,
but also unsafe. Even though it is called with osdc->lock held for
write in all cases, resetting the OSD request refcount can still race
with handle_reply() and result in use-after-free. Taking linger ping
as an example:
handle_timeout thread handle_reply thread
down_read(&osdc->lock)
req = lookup_request(...)
...
finish_request(req) # unregisters
up_read(&osdc->lock)
__complete_request(req)
linger_ping_cb(req)
# req->r_kref == 2 because handle_reply still holds its ref
down_write(&osdc->lock)
send_linger_ping(lreq)
req = lreq->ping_req # same req
# cancel_linger_request is NOT
# called - handle_reply already
# unregistered
request_reinit(req)
WARN_ON(req->r_kref != 1) # fires
request_init(req)
kref_init(req->r_kref)
# req->r_kref == 1 after kref_init
ceph_osdc_put_request(req)
kref_put(req->r_kref)
# req->r_kref == 0 after kref_put, req is freed
<further req initialization/use> !!!
This happens because send_linger_ping() always (re)uses the same OSD
request for watch ping requests, relying on cancel_linger_request() to
unregister it from the OSD client and rip its messages out from the
messenger. send_linger() does the same for watch/notify registration
and watch reconnect requests. Unfortunately cancel_request() doesn't
guarantee that after it returns the OSD client would be completely done
with the OSD request -- a ref could still be held and the callback (if
specified) could still be invoked too.
The original motivation for request_reinit() was inability to deal with
allocation failures in send_linger() and send_linger_ping(). Switching
to using osdc->req_mempool (currently only used by CephFS) respects that
and allows us to get rid of request_reinit().
Cc: stable@vger.kernel.org
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Acked-by: Jeff Layton <jlayton@kernel.org>
|
|
Descriptor table is a shared resource; two fget() on the same descriptor
may return different struct file references. get_tap_ptr_ring() is
called after we'd found (and pinned) the socket we'll be using and it
tries to find the private tun/tap data structures associated with it.
Redoing the lookup by the same file descriptor we'd used to get the
socket is racy - we need to same struct file.
Thanks to Jason for spotting a braino in the original variant of patch -
I'd missed the use of fd == -1 for disabling backend, and in that case
we can end up with sock == NULL and sock != oldsock.
Cc: stable@kernel.org
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
The current code evaluates RQT size based on the configured number of
virtqueues. This can raise an issue in the following scenario:
Assume MQ was negotiated.
1. mlx5_vdpa_set_map() gets called.
2. handle_ctrl_mq() is called setting cur_num_vqs to some value, lower
than the configured max VQs.
3. A second set_map gets called, but now a smaller number of VQs is used
to evaluate the size of the RQT.
4. handle_ctrl_mq() is called with a value larger than what the RQT can
hold. This will emit errors and the driver state is compromised.
To fix this, we use a new field in struct mlx5_vdpa_net to hold the
required number of entries in the RQT. This value is evaluated in
mlx5_vdpa_set_driver_features() where we have the negotiated features
all set up.
In addition to that, we take into consideration the max capability of RQT
entries early when the device is added so we don't need to take consider
it when creating the RQT.
Last, we remove the use of mlx5_vdpa_max_qps() which just returns the
max_vas / 2 and make the code clearer.
Fixes: 52893733f2c5 ("vdpa/mlx5: Add multiqueue support")
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Eli Cohen <elic@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Either userspace or kernelspace need to pre-fetch keys inconditionally
before comparisons for this to work. Otherwise, register tracking data
is misleading and it might result in reducing expressions which are not
yet registers.
First expression is also guaranteed to be evaluated always, however,
certain expressions break before writing data to registers, before
comparing the data, leaving the register in undetermined state.
This patch disables this infrastructure by now.
Fixes: b2d306542ff9 ("netfilter: nf_tables: do not reduce read-only expressions")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
Douglas Miller
Christophe JAILLET
Julia Lawall
Linus Torvalds
David Howells
Chengdong Li
Athira Rajeev
Thomas Richter
Ian Rogers
Kan Liang
Piyush Malgujar
Mika Westerberg
Yang Yingliang
Peter Zijlstra
Paolo Bonzini
Yury Norov
Sean Christopherson
Uwe Kleine-König
Haibo Chen
Tetsuo Handa
Wanpeng Li
Arnaldo Carvalho de Melo
Aaron Lewis
Daejun Park
Conor Paxton
Daisuke Matsuda
Krzysztof Kozlowski
Ulf Hansson
Maarten Lankhorst
Andrew Lunn
Jonathan Lemon
Joachim Wiberg
Marek Vasut
Mario Limonciello
Ilya Dryomov
Al Viro
Eli Cohen
Pablo Neira Ayuso